Project process model

250 views
224 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
250
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Project process model

  1. 1. Project process model By IGroup
  2. 2. First process is cutting, a tools that we use inthis process is electric jigsaw. We use it to cutalong a line that we marked on a veneer formake products component that we need.
  3. 3. *Advantages - Can cut a veneer easily.*Disadvantages - A person who want to use must be experienced.
  4. 4. Second process is planing a tool is asimple plane, we use it to shove someuneven manner of work’surface.
  5. 5. *Advantages - Reduce harm from burr and make a good-looking of work.*Disadvantages - With a simple plane there is nonelectric tool, so you have to some excercise.
  6. 6. Third process is hammering a tools for thisprocess is small hammer. we decide tochange from attach a pin to wedge a nailbecause with rarity’ veneer it hard to use adrill and attach a pin, so hammering can usea small nail wedged into a veneer easily andit can make all joint member free to rotate assame as pin. And about the hinged door, sowe use screwdriver to take bolt into it.
  7. 7. *Advantages - No need to use a drill and easily to use.*Disadvantages - Using hammer has a risk and aproduct’ll be broke soon if you use too small nail.
  8. 8. Fourth process is smearing wax, our product issame as other wood furniture, when all processfinished we have to coat some wax around it.
  9. 9. *Advantages - Add waterproof and polished propertiesinto it and make it look like some luxury furniture.*Disadvantages - We cant know a certain lifespan ofthese properties, so if it gonna happen you can coat itover again right? .
  10. 10. Thank you foryourattention.

×