The evolution of celphones By Tobías Frieder

The Innovation This history of mobile phones chronicles the development of handheld radio telephone technology from two-way radios in vehicles to handheld cellular phones. In the beginning, two-way radios (known as mobile rigs) were used in vehicles such as taxicabs, police cruisers, ambulances, and the like, but were not mobile phones because they were not normally connected to the telephone network. Users could not dial phone numbers from their mobile radios in their vehicles. A large community of mobile radio users, known as the mobileers, popularized the technology that would eventually give way to the mobile phone. Originally, mobile phones were permanently installed in vehicles, but later versions such as the so-called transportables or "bag phones" were equipped with a cigarette lighter plug so that they could also be carried, and thus could be used as either mobile or as portable two-way radios. During the early 1940s, Motorola developed a backpacked two-way radio, the Walkie-Talkie and later developed a large hand-held two-way radio for the US military. This battery powered "Handie-Talkie" (HT) was about the size of a man's forearm.

This history of mobile phones chronicles the development of handheld radio telephone technology from two-way radios in vehicles to handheld cellular phones.

In the beginning, two-way radios (known as mobile rigs) were used in vehicles such as taxicabs, police cruisers, ambulances, and the like, but were not mobile phones because they were not normally connected to the telephone network. Users could not dial phone numbers from their mobile radios in their vehicles. A large community of mobile radio users, known as the mobileers, popularized the technology that would eventually give way to the mobile phone. Originally, mobile phones were permanently installed in vehicles, but later versions such as the so-called transportables or "bag phones" were equipped with a cigarette lighter plug so that they could also be carried, and thus could be used as either mobile or as portable two-way radios. During the early 1940s, Motorola developed a backpacked two-way radio, the Walkie-Talkie and later developed a large hand-held two-way radio for the US military. This battery powered "Handie-Talkie" (HT) was about the size of a man's forearm.

In December 1947: Douglas H. Ring and W. Rae Young, Bell Labs engineers, proposed hexagonal cells for mobile phones In December 1971, AT&T submitted a proposal for cellular service to the Federal Communications Commission (FCC). On April 3, 1973, Motorola employee Dr. Martin Cooper placed a call to rival Joel Engel, head of research at AT&T's Bell Labs, while walking the streets of New York City talking on the first Motorola DynaTAC prototype in front of reporters. Motorola has a long history of making automotive radio, especially two-way radios for taxicabs and police cruisers. In 1978, Bell Labs launched a trial of first commercial cellular network in Chicago using AMPS [1]. Not long after the introduction of 2G networks, projects began to develop third generation (3G) systems. Inevitably there were many different standards with different contenders pushing their own technologies. Quite differently from 2G systems, however, the meaning of 3G has been standardized in the IMT-2000 standardization processing. This process did not standardize on a technology, but rather on a set of requirements (2 Mbit/s maximum data rate indoors, 384 kbit/s outdoors, for example). At that point, the vision of a single unified worldwide standard broke down and several different standards have been introduced.

In December 1947: Douglas H. Ring and W. Rae Young, Bell Labs engineers, proposed hexagonal cells for mobile phones

In December 1971, AT&T submitted a proposal for cellular service to the Federal Communications Commission (FCC).

On April 3, 1973, Motorola employee Dr. Martin Cooper placed a call to rival Joel Engel, head of research at AT&T's Bell Labs, while walking the streets of New York City talking on the first Motorola DynaTAC prototype in front of reporters. Motorola has a long history of making automotive radio, especially two-way radios for taxicabs and police cruisers.

In 1978, Bell Labs launched a trial of first commercial cellular network in Chicago using AMPS [1].

Not long after the introduction of 2G networks, projects began to develop third generation (3G) systems. Inevitably there were many different standards with different contenders pushing their own technologies. Quite differently from 2G systems, however, the meaning of 3G has been standardized in the IMT-2000 standardization processing. This process did not standardize on a technology, but rather on a set of requirements (2 Mbit/s maximum data rate indoors, 384 kbit/s outdoors, for example). At that point, the vision of a single unified worldwide standard broke down and several different standards have been introduced.