Test Plan : A document that defines the overall testing approach is called Test Plan.
Test Case Design : Document that defines what is selected to test,and describes the expected result is called Test Design.Set of procedures inorder to find out the defects.
Test Execution : Executing the test cases.
Test log : Pass and fail information will be stored in this test log.
Defect tracking : All the failed items will come under the defect tracking. (closing defect)
Test report : Reports are generated during the TLC.Final test summary report. (generated at the end of testing for making decisions)
Test Plan Preparation (manual)
Test Objective : A test objective is simply a testing “goal”.It is a statement of what the tester is expected to perform during the testing activity.
Test strategy :
1. Techniques that are going to be used during the testing.
2. What types of tests must be conducted.
3. What stages of testing are required.(e.g.unit,system)
Test Risk Analysis:
A risk is a condition that can result in a loss.The risk that may occur/arise during the analysis of the testing.
* The probability that the negative event will occur.
Risk identified - - - Unavailability of resources - software hardware etc . Mitigation plan - - - What are the ways to overcome
Test schedule & Resources
Task Duration Resource
Test plan 3 1
Test design 5 3
Roles and Responsibilities
Test Manager - Manages the entire testing activity (approve).
Test leader - Prepare the test plan, Review test case, monitor defect tracking and Reports Preparation.
Test Engineer - Prepare test case design and Daily reports.
The communications during the project
will be informed through this communication
The Test Bed for the Testing Activity is identified. Like,
* Software Requirements.
* hardware Requirements.
Automated Test Tools
Identify which tools is used for each individual test
Should know the test level criteria
Test Case Design (manual)
Test case ID : Sys_xyz_o1
Test case description : A short note about the testing.
Test case procedure : Each and every step has to be mentioned in test case procedure.
Test inputs (or) Test Data : Input data
Expected result : The Expected out come of the test case.
Actual result : What we have received is the actual result.
Expected result = Actual result then the test is pass otherwise it is fail.
Test Log * Failed test case are going to be the defects Fail dfgdfg Sys_xyz_01 Pass hgfhgfh Sys_xyz_02 Test status/Result Test Case Description Test Case ID
All the failed test execution/defects will come under the defect tracking.
Defect Tracking Contains :
Defect Id : Sys_def_xyz_o1
Test case Id : Sys_xyz_o1
Defect Description : Specify the defect.
Defect Recovery procedure : Repeating the same test cases with some modifications.
The Current Status of the defects
Defect Classification Defects that affect limited areas of functionality that either can be worked around or ignored Minor/Trivial Major functions disabled or incorrect Non-conformance to standards Defects that cause incorrect behavior with known workaround Important areas of the system are affected which would not cause operational failure Major System inoperable Implementation that does not meet the requirement Defects that may cause the system to hang, crash, produce incorrect or unexpected behavior, corrupt user data with no work around Critical