How to improve your “Kissing Fish”
Click on the Graph button. The “Kissing Fish”
image should be on the screen. If the image is
not on the screen please refer to my previous
instructions on how to make a “Kissing Fish”.
Click on the 2nd button. Then click on the
PRGM button. You should now see the DRAW
Screen. Scroll down to 2:Line( Click ENTER.
You should see the Graph Screen. Scroll over
to the left side of the screen. Make sure your
pointer lines up with the top most line on the
Graph Screen. Click ENTER. Click the DOWN
ARROW once. Click the RIGHT ARROW twice.
Now click ENTER. Click ENTER again. Click
the DOWN ARROW three times. Then click
ENTER. Click the LEFT ARROW once. Now
click ENTER. Congratulations you have now
made 1 Tailfin. Scroll over to the top most line
on the right side of the screen. Once it is lined
up click ENTER. Hit the down arrow twice. Hit
the left arrow twice. Click ENTER. Click
ENTER again. Hit the DOWN ARROW twice. Hit
the RIGHT ARROW once. Now click ENTER.
Congratulations you have now made the second
Tailfin. Your ‘Kissing Fish” is now finished.
It should look like this
or something similar.