Oracle EBS R12.1.3_Installation_linux(64bit)_Pan_Tian

Oracle Application R12 (12.1.3)Installation on Linux(64 bit)Author: Pan Tian(tianpan@gmail.com)Creation Date: 25/05/2012Last Updated:Version:Status:

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian ContentsObjective.........................................................................................................................................................................................1Download & Unzip......................................................................................................................................................................2 Download....................................................................................................................................................................................2 Unzip...........................................................................................................................................................................................2 MD5 Checksums........................................................................................................................................................................2Pre-Install Task.............................................................................................................................................................................4 Disk Space...................................................................................................................................................................................4 Specific Software Requirements .............................................................................................................................................4 RPM.............................................................................................................................................................................................4 JDK ..............................................................................................................................................................................................8 /etc/hosts...................................................................................................................................................................................8 /etc/sysconfig/network...........................................................................................................................................................8 /etc/sysconfig/networking/profiles/default/network.....................................................................................................8 /etc/sysctl.conf..........................................................................................................................................................................8 /etc/security/limits.conf.........................................................................................................................................................9 /etc/resolv.conf.......................................................................................................................................................................10 OS Library Patch for Oracle HTTP Server(on Oracle Linux 5, RHEL 5 and Oracle Linux 6 only)..............................10 Link to Motif library in Oracle Application Server 10.1.2 (on Oracle Linux 5 and RHEL 5 only)...............................10 OS User & Group.....................................................................................................................................................................10Installation process.....................................................................................................................................................................11 Export Display..........................................................................................................................................................................11 ./rapidwiz.................................................................................................................................................................................11 Add Env parameter to .bash_profile file..............................................................................................................................20 Default DB & Apps password...............................................................................................................................................21 R12 Directory Structure..........................................................................................................................................................22EBS 12.1.3 upgrade......................................................................................................................................................................24 Download patch 9239090........................................................................................................................................................24 Documents................................................................................................................................................................................24 Installation process..................................................................................................................................................................25Issues & Solutions......................................................................................................................................................................29 RW-50004: Error code received when running external process......................................................................................29 RW-50015: Error: - HTTP Listener is not responding.........................................................................................................29 Enter the location for the disk labeled: Oracle Applications Rapid Install – RDBMS Disk 1.......................................29 While adpatch EBS 12.1.3, encounter ORA-03113: end-of-file on communication channel.........................................30Reference......................................................................................................................................................................................32 Metalink Notes.........................................................................................................................................................................32 Articles.......................................................................................................................................................................................32 ii

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianObjective Step by Step instructions to install Oracle Applications R12(12.1.1) on Oracle Enterprise Linux 5 are described in this article. This is a single node installation, meaning that the database, all product directories and AD core directories, and all servers (concurrent processing, forms, and Web) are installed on a single node under one common APPL_TOP. The database node and the Applications node can be installed on the same machine. This type of installation is generally used for small systems or for demonstration purposes. More commonly, the database node is installed on one machine, and the Applications node on another machine. This provides improved manageability, scalability, and performance. This document will take Linux 64 bit platform as example. And my hardware configuration is Item Configuration CPU 2 * Intel(R) Xeon(R) X5670 2.93GHz RAM 6G Disk Space /u01 300 GB /u02 200 GB / 100 GB 1

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianDownload & UnzipDownload Official Download Link https://edelivery.oracle.com/ For Oracle Internal User, you can also download from link: https://sac.us.oracle.com/download/index.html (NOTE: Choose proper platform and 32 bit/64 bit download files) Download Tips: Use the following command for Batch download, firstly collect all URLs required and put it in a text file, say download.txt, one URL on a line wget -i download.txt (-i means Read URLs from file.)Unzip Create stage area - for downloaded installation pack, just unzip all zip files under stage area directory StageR12, eg. unzip B53824-01_1of4.zip -d /u02/ StageR12 unzip B53824-01_2of4.zip -d /u02/ StageR12 …… After unzip, File Path in StageR12 like following,MD5 Checksums Strongly suggest you perform MD5 check against the stage area. The md5 checksums for the staged directory structure can be used to validate the software integrity. Do this by running the md5sum program against the stage area using 2

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tianthe oracle created checksum file. Note for can observe you have any problem with yourstage or not(Corrupted zip etc)MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1) 3

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianPre-Install TaskDisk Space File System Space Requirements for Standard Installation Node Space Required Applications node file system (includes 35 GB (50 GB on HP-UX Itanium) OracleAS 10.1.2 Oracle Home, OracleAS 10.1.3 Oracle Home, COMMON_TOP, APPL_TOP,and INST_TOP) Database node file system (Fresh install) 55 GB Database node file system (Vision Demo 208 GB (210 GB on HP-UX Itanium) Database) Stage area(unzipped files) 47 GB The total space required for a standard system (not including the stage area) is 85 GB for a fresh install with a production database, and 233 GB for a fresh install with a Vision Demo database. You can use below Unix command to check disk space df –hSpecific Software Requirements The following maintenance tools must be installed on machine, and their locations specified both in the PATH of the account that runs Rapid Install and in the PATH of the accounts that will own the database tier and application tier file systems. Operating System Required Maintenance Tools Linux x86 ar, gcc, g++, ld, ksh, make, X Display Server Linux x86-64 ar, gcc, g++, ld, ksh, make, X Display Server HP-UX Itanium ar, cc, aCC, make, X Display Server ar, cc, aCC, make, X Display Server HP-UX PA-RISC IBM AIX on Power Systems (64-bit) ar, cc, aCC, make, X Display Server ar, cc, ld, linkxlC, make, X Display Server Microsoft Windows Server (32-bit) Sun Solaris SPARC (64-bit) ar, ld, make, X Display ServerRPM Per Note: 761566.1 First, you should check your Linux Kernel, to determine your linux version, enter: 4

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tianuname –rSo my Linux is Linux 6, For Linux 6, Required Packages isGA (6.0) or higher of Oracle Linux 6 is requiredThe following packages (or versions of packages) are not part of the OS distribution media andmust be downloaded separately (from http://oss.oracle.com/projects/compat-oracle/files/Enterprise_Linux/) for Oracle Linux 6 and installed manually: openmotif21-2.1.30-11.EL6.i686 (32-bit)1 xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386 (32-bit)The following packages must be installed from the Oracle Linux 6 distribution media: binutils-2.20.51.0.2-5.11 gcc-4.4.4-13.el16.x86_64 gcc-c++-4.4.4-13.el16.x86_64 glibc-2.12-1.7.el6.i686 (32-bit) glibc-2.12-1.7.el6.x86_64 glibc-common-2.12-1.7.el6.x86_64 5

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian glibc-devel-2.12-1.7.el6.i686 (32-bit) glibc-devel-2.12-1.7.el6.x86_64 libgcc-4.4.4-13.el6.i686 libgcc-4.4.4-13.el6.x86_64 libstdc++-devel-4.4.4-13.el6.i686 libstdc++-devel-4.4.4-13.el6.x86_64 libstdc++-4.4.4-13.el6.i686 libstdc++-4.4.4-13.el6.x86_64 make-3.81-19.el6.x86_64 gdbm-1.8.0-36.el6.i686 gdbm-1.8.0-36.el6.x86_64 libXp-1.0.0-15.1.el6.i686 libXp-1.0.0-15.1.el6.x86_64 libaio-0.3.107-10.el6.i686 libaio-0.3.107-10.el6.x86_64 libgomp-4.4.4-13.el6.x86_64 sysstat-9.0.4-11.el6.x86_64 util-linux-ng-2.17.2-6.el6.x86_64 unzip-5.52-3.0.1.el5.x86_642 compat-libstdc++-296-2.96-144.el6.i686 compat-libstdc++33-3.2.3-69.el6.i686Additionally, the following RPMs are required for the database tier running 11gR2 (users mustupgrade the bundled 11gR1 DB to 11gR2 either before or after installing 12.1) on the databasetier: compat-libstdc++-33-3.2.3-69.el6.x86_64 elfutils-libelf-devel-0.148.1-el6.x86_64 kernel-uek-headers-2.6.32-100.28.5.el6.x86_64 libaio-devel-0.3.107-10.el6.x86_64 6

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian unixODBC-2.2.14-11.el6.i686 unixODBC-devel-2.2.14-11.el6.i686 unixODBC-2.2.14-11.el6.x86_64 unixODBC-devel-2.2.14-11.el6.x86_64 xorg-x11-utils-7.4-8Note: 1: The openmotif package version must be 2.1.30 (for example, openmotif-2.3.3-1 is notsupported). 2: This unzip package (available from EL 5 distribution) is only required for purposes ofrunning Rapid Install to unzip the required EBS files as part of the installation.Be sure you have above rmp on your system, you can use below command to checkwhether RPM packages are installed or notrpm -qa --queryformat "%{NAME}-%{VERSION}.%{RELEASE} (%{ARCH})n" | grep gccq = querya = allWhat’s the RPM:The Red Hat Package Manager (RPM) is a toolset used to build andmanage software packages on UNIX systems. Distributed with the Red Hat Linuxdistribution and its derivatives (CentOS is 100% compatible rebuild of the RehatEnterprise Linux).The RPM files represent application or package that you can install on Linux system. 7

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianJDK JDK 6 is bundled with Oracle E-Business Suite version 12.1.1. You do NOT need to install the JDK separately./etc/hosts For Oracle Linux 4, 5 and 6, and Red Hat Enterprise Linux 4 and 5: Verify that the /etc/hosts file is formatted as follows: 127.0.0.1 localhost.localdomain localhost [ip_address] [node_name].[domain_name] [node_name]/etc/sysconfig/network Verify that the /etc/sysconfig/network file is formatted as follows: HOSTNAME=[node_name].[domain_name]/etc/sysconfig/networking/profiles/default/network If the /etc/sysconfig/networking/profiles/default/network file exists, remove it. If you changed any files in the previous steps, restart the system./etc/sysctl.conf Edit the /etc/sysctl.conf file to configure your kernel settings. After editing the file, use the "sysctl -p" command or restart the system to invoke the new settings. 8

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian Note: If the current value for any parameter is higher than the value listed in the following table, then do not change the value of that parameter. The following table lists the kernel settings for Oracle Linux 4, 5 and 6, Red Hat Enterprise Linux AS/ES 4 and 5, and SUSE Linux Enterprise Server 9 and 10: 1: set using the following entry in the /etc/sysctl.conf file: kernel.sem = 256 32000 100 142 2: On the server running the EBS Database, this kernel parameter must be the lesser of half the size of the physical memory (in bytes) and 4294967295 3: values recommended for the local port range may need to be adjusted according to the specific needs of the users environment in order to avoid port conflicts./etc/security/limits.conf Open the /etc/security/limits.conf file and change the existing values for "hard" and "soft" parameters as follows. Restart the system after making changes. Note: If the current value for any parameter is higher than the value listed in this document, then do not change the value of that parameter. * hard nofile 65535 * soft nofile 4096 * hard nproc 16384 * soft nproc 2047 9

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian/etc/resolv.conf Add or update the following entries to these minimum settings in the /etc/resolv.conf file on each server node: options attempts:5 options timeout:15OS Library Patch for Oracle HTTP Server(on Oracle Linux 5, RHEL 5 and Oracle Linux 6 only) Download and apply the patch 6078836 from My Oracle Support to fix an issue with the Oracle HTTP Server (missing libdb.so.2) bundled with the E-Business Suite technology stack. Note that this patch (which includes a required operating system library) must be applied before installing Oracle E-Business Suite. Without this patch, after installation, HTTP Server can not start.Link to Motif library in Oracle Application Server 10.1.2 (on Oracle Linux 5 and RHEL 5 only) Perform the following command (as root on your system) to update a required link to a Motif library prior to relinking or patching the 10.1.2 Application Server Oracle Home: # unlink /usr/lib/libXtst.so.6 # ln -s /usr/X11R6/lib/libXtst.so.6.1 /usr/lib/libXtst.so.6OS User & Group Generally for PROD instance, we need create two OS user for installation, one user is used to manage DB, the other is used to manage Apps. Since our instance is a TEST instance, so for simple, we just create one user to manage DB and Apps, Here we use ‘oracle’ as user, use ‘oinstall’ as group. # groupadd oinstall -g 2000 # useradd -g oinstall -u 2000 oracle # chown -R oracle:oinstall /u01/oracle chown changes the user and/or group ownership of each given file. -R, operate on files and directories recursively 10

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianInstallation processExport Display To ensure we have a graphical installation process, we can export server to our local linux which have X window system. If your server have installed X window, then you can ignore this step. (ptian) ptian- env | grep ALTDISPLAY ALTDISPLAY=rws60004sgd.us.oracle.com:50 (First, in our local linux, Check our local linux’s host and port) (ptian) ptian- ssh admin@bej301441.cn.oracle.com admin@bej301441.cn.oracle.coms password: Last login: Thu May 31 21:32:49 2012 from 10.182.114.9 (SSH to server which we intend to install EBS) [admin@bej301441 ~]$ export DISPLAY=rws60004sgd.us.oracle.com:50./rapidwiz If you intend to use standard installation mode, you need login as root user. [root@bej301441 rapidwiz]#cd /u02/StageR12/startCD/Disk1/rapidwiz [root@bej301441 rapidwiz]# ./rapidwiz Rapid Install Wizard is validating your file system...... 4 dvd labels found Rapid Install Wizard will now launch the Java Interface..... 11

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian 12

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianDefault Oracle EBS Ports 14

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianPort numbers can be modified during installation or may be automatically incrementedby x during installation where x is a number 1 to 100 (typical less than 10). Port numberranges are often a grouping of 3, 4, 5, or 6 contiguous ports in the specified range. 15

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian Login Test: http://<host_name>.<domain_name>:port/OA_HTML/AppsLoginAdd Env parameter to .bash_profile file .bash_profile is a bash shell that is started when login. For DB user, Modify /.bash_profile, add your DB env file path into it, eg. . /u01/oracle/mc3yd213/db/tech_st/11.1.0/mc3yd213_bej301441.env For Apps user, Modify /.bash_profile, add your Apps env file path into it, eg. . /u01/oracle/mc3yd213/apps/apps_st/appl/APPSmc3yd213_bej301441.env 20

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianDefault DB & Apps password Database: SYS/change_on_install SYSTEM/manager Application Schema passwords: APPS Schema: APPS/APPS GWYUID User: APPLSYSPUB/PUB Guest User: GUEST/ORACLE Application Users: SYSADMIN/SYSADMIN MFG/WELCOME OPERATIONS/WELCOME SERVICES/WELCOME MRC/WELCOME HRMS/WELCOME 21

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianR12 Directory Structure ===For Applmgr User=== $APPL_TOP R12:<APPS_BASE>/apps/apps_st/appl NOTE: Oracle Applicaitons product files, including $INV_TOP, $AU_TOP.... $COMMON_TOP R12:<APPS_BASE>/apps/apps_st/comn(Common files such as Java&HTML) NOTE: $JAVA_TOP is under $COMMON_TOP $ORACLE_HOME R12:<APPS_BASE>/apps/tech_st/10.1.2 ===For Oracle User=== $ORACLE_HOME R12:<ORACLE_BASE>/db/tech_st/10.2.0 NOTE:Oracle Home for 10g RDBMS ORADATA 22

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianR12:<ORACLE_BASE>/db/apps_st/dataNOTE:Oracle 10g database files===INSTANCE HOME===INST_TOPR12:<APPS_BASE>/inst/apps/<context_name>NOTE:Configuration,logs,Certificates. 23

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianEBS 12.1.3 upgradeDownload patch 9239090 Download 12.1.3 patch: https://updates.oracle.com/download/9239090.html NOTE: the linux 32-bit and the 64-bit patch are one and the same. 32-bit Linux patches are applicable for 64-bit Linux OS as well.Documents Official Documents Oracle E-Business Suite Release 12.1.3 Readme (Doc ID 1080973.1) Database Preparation Guidelines for an Oracle E-Business Suite Release 12.1.1 Upgrade [Doc ID 761570.1] Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [Document 761564.1] External references http://my.opera.com/jafferappsdba/blog/2011/12/17/upgrade-from-ebs-12-1-1- to-12-1-3 24

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian http://oracleminds.wordpress.com/2011/12/22/how-did-i-upgrade-our-oracle-ebs- from-r12-1-1-to-12-1-3/ 2. Installation packs * Patch 9239089 * Patch 9239090 * Patch 9239095 * Patch 9817770 * Patch 9966055Installation process 1.Set Application Environment source /d01/oracle/VIS/apps/apps_st/appl/APPSVIS_adc6180205.env 2. stop all application process. /d01/oracle/VIS/inst/apps/VIS_adc6180205/admin/scripts/adstpall.sh apps/apps 3. set environment to RDBMS oracle_home. source /d01/oracle/VIS/db/tech_st/11.1.0/VIS_adc6180205.env 4.Shutdown Database as following sqlplus / as sysdba SQL>shutdown immediate; 5.Stop Database Listener lsnrctl stop VIS 6. edit the init parameter file in the database(Using 11gR1 follow doc.761570.1) /d01/oracle/VIS/db/tech_st/11.1.0/dbs/initVIS.ora vi initVIS.ora add (_disable_fast_validate=TRUE). 25

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian7. set pga and sga size in init parameter file (initVIS.ora file)pga_aggregate_target=2GNote:(If errorlike below:ORA-04030: out of process memory when trying to allocate 822904 bytes (pga heap, kcobuffer)ORA-07445: exception encountered: core dump [dbgtfdFileWrite()+48]set the _pga_max_size initialization parameter to a larger value as follows:_pga_max_size=104857600and restart your database.)8.start Database Listenerlsnrctl start VIS9. restart the database.sqlplus / as sysdbasql> startup pfile=/d01/oracle/VIS/db/tech_st/11.1.0/dbs/initVIS.ora10. Use AutoPatch to apply R12.AD.B.DELTA.3 Patch 9239089Pre Install Steps as per Patch readmefile & Doc.1077769.1(i)create a dir on $ORACLE_HOME/appustil/admin/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/admin(ii)Copy adgrants.sql from this patch directory to $ORACLE_HOME/appsutil/admincp /u01/12.1.3/9239089/admin/adgrants.sql/d01/oracle/VIS/db/tech_st/11.1.0/appsutil/admin/adgrants.sql(iii) Set the database environment/d01/oracle/VIS/db/tech_st/11.1.0/VIS_adc6180205.env(iv)logon to sqlplus and run adgrants.sql with apps schema password as belowsqlplus /nolog 26

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tiansql> connect as sysdbasql> @/u01/oracle/ORCL/db/tech_st/11.1.0/appsutil/admin/adgrants.sql apps11. Disable maintanance mode using adadmin utility12. set application environment.Run Patch 9239089 using adpatch*u9239089.drv(Check Log file in/u01/oracle/ORCL/apps/apps_st/appl/admin/ORCL/log/u9239089_12122011.log)13. Compile APPS schemaRun adadmin > Compile/Reload Applications Database Entities menu >Compile APPSschema.*Choose "No" at the following prompt:Run Invoker Rights processing in incrementalmode [No]14.Apply patch 9239090 using adpatch*u9239090.drv(When adrelink error chose "Yes" to continue)15. Post Step (There is no any pre or post install steps)Apply Patches *Patch 9817770*Patch 996605516.Remove _disable_fast_validate=TRUE parameter from initVIS.ora file17.Disable Maintanence mode18.Run Autocnfig both database and application tier 27

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian2. Query patches applied in tablead_applied_patchesad_bugs3. License applications 28

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianIssues & SolutionsRW-50004: Error code received when running external process. Error Message:” RW-50010: Error: - script has returned an error: 1 RW-50004: Error code received when running external process. Check log file for details. Running Database Install Driver for mc2yd213 instance” When installation progress go to 33%, then raise RW-50004 Error, Generally it is due to OS user/group you used may not have correct priority to installation folder. You can check details from logs.RW-50015: Error: - HTTP Listener is not responding. Error Message:” RW-50015: Error: - HTTP Listener is not responding. The service might not have started on the port yet. Please check the service and use the retry button.” It means you did not apply patch 6078836. Download and apply the patch 6078836 from My Oracle Support to fix an issue with the Oracle HTTP Server (missing libdb.so.2) bundled with the E-Business Suite technology stack.Enter the location for the disk labeled: Oracle Applications Rapid Install – RDBMS Disk 1 While installation, it pop us a window which ask to select install disk. 29

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.Tian Error Message: “Select the root directory of the required Rapid Install Disk Enter the location for the disk labled: Oracle Applications Rapid Install - RDBMS Disk 1” This is very big mistake, log will tell you reason Disk platform missmatch. required platform: LINUX_X86-64 Disks for platform: LinuxWhile adpatch EBS 12.1.3, encounter ORA-03113: end-of-file on communication channel From adpatch,” STATUS_MESSAGE ------------------------------------------------------------------------------ Running UTL_RECOMP.RECOMP_PARALLEL... declare * ERROR at line 1: ORA-03113: end-of-file on communication channel ERROR: ORA-03114: not connected to ORACLE “ Solution: Edit the init parameter file in the database(Using 11gR1 follow doc.761570.1)， /d01/oracle/VIS/db/tech_st/11.1.0/dbs/initVIS.ora 30

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianAdd_disable_logging=false 31

Oracle Application R12 (12.1.3) Installation on Linux(64 bit) - Pan.TianReferenceMetalink Notes Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1] Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1] MD5 Checksums for R12.1.1 Rapid Install Media (Doc ID 802195.1) How to locate the log files and troubleshoot Rapid Install for Release 12.0.x and 12.1.x (Doc ID 452120.1)Articles Oracle Applications Installation Guide: Using Rapid Install R12(12.1.1) http://docs.oracle.com/cd/E18727_01/doc.121/e12842.pdf Oracle Applications (12.1.1) Installation on RHEL 5 http://heliosguneserol.wordpress.com/2010/06/11/oracle-applications-12-1-1- installation-on-rhel-5/ Oracle Applications(Apps) R12 (12.1.1) Installation on Linux http://www.freeoraclehelp.com/2011/11/oracle-applicationsapps-r12-1211.html Appsdba.info R12 Install http://www.appsdba.info/docs/oracle_apps/Installation/R12/snir12-ln.pdf E-Business Suite 12.1.1 Standard Installation on Linux OEL 5.3 http://gerardnico.com/wiki/ebs/installation 32

Oracle EBS R12.1.3_Installation_linux(64bit)_Pan_Tian

by Pan Tian

Accessibility

Categories

Upload Details

Usage Rights

2 Embeds 5

Statistics