Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators
Upcoming SlideShare
Loading in...5
×
 

Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators

on

  • 4,306 views

Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well ...

Megger designs and manufactures portable electric test equipment. Megger products help install, improve efficiency, reduce cost and extend the life of electrical assets. The Megger brand is so well known these days that some maintenance professionals incorrectly use it as a verb when they refer to doing an insulation test.

Megger manufactures hand-held test equipment as well as larger insulation testers, oil test equipment and low resistance ohmmeters.

Megger DETEX Voltage Detectors are available in seven models that cover a range from distribution class to transmission line voltages up to 550kV.

Megger cable fault location solutions include : low voltage TDR underground cable fault locators, surge generator fault locators, cable fault pinpointing, high voltage DC test sets and high voltage (11kV-33kV-66kV-132kV) underground cable fault locators.

Statistics

Views

Total Views
4,306
Views on SlideShare
1,936
Embed Views
2,370

Actions

Likes
1
Downloads
83
Comments
0

6 Embeds 2,370

http://www.cablejoints.co.uk 2361
https://www.google.com 3
https://www.google.co.in 2
http://www.google.co.in 2
http://www.google.ae 1
http://www.google.com 1

Accessibility

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators Megger Electrical Testing Instruments - Cable Fault Locators, High Voltage Detectors & Voltage Indicators Presentation Transcript

  • cket ction: MFT1700 series multifunction installation tester This exciting new series of multifunctional installation testers offers all the tests required for mance ceramic fibrethe 17th Edition in one tough, light tester thermal insulation contained rs of Teflon coated polyester give the jacket a durable ial feel. with Velcro fixing strips and a moveable flap for ease makes the HIJD jacket theseries downloading PAT400 most convenient way to products warm. appliance tester al Data: erial: Electrical Test Instruments portable With memory for 10,000 assets and the capability of uploading assets, test and location information you can be assured that you are working with the most productive PAT tester on the market. 1100 deitex texturised Nylon Polyurethane coated Glass filament blanket TPT series and MPU690 two pole testers Velcro Fixing and proving unit Made: A really tough combination that could save your life, bring Megger build quality and performance to safe isolation. ater jackets are manufactured to conform to the EEC and EMC directives and CE marked accordingly. 17th Edition MultiFunction Testers TDR1000/3 Cable fault locator Remove the mystery from cable fault location with this easy to use TDR. and Safety: ater jackets are manufactured to conform to the EEC and EMC directives and CE marked accordingly. Award winning MFT1700 series PAT Testers The efficient PAT400 – Now even faster WWW.MEGGER.COM CAT IV Testers From the ground up – Designed to keep you safe Copyright © 2013 Megger Limited Archcliffe Road Dover CT17 9EN Printed in the UK BP/65K/1 Ed. Part No 82600 The word ‘Megger’ is a registered trademark
  • Networking is profitable not just social MFT1700 series multifunction installation tester Now offering 3 and 2 wire non-trip loop test. See page 4 TDR1000/3 series cable fault locators Remove the mystery from cable fault location with this easy to use TDR. See page 32 Home automation is on everybody’s lips, and covers pages of every magazine you read. Control is key. This principle has been established in the industrial and commercial setting. Now it is forging in to the domestic market with the advent of smart metering and the governments insistence that new homes will be carbon neutral in the future. This more integrated approach to energy usage and management is changing in the way electricians go about their business. Already many new builds are fitted with a CAT 5e network (also known as IEC Class F) usually to make it easy to run a home computer network. But now with introduction of active systems, such as lighting and heating control, energy recovery and smart appliances, the electricians’ world is getting more complex. Megger has introduced the NET200, an inexpensive network qualification tool that measures the performance of digital networks. For more information see page 33. MFT MFT 1700 Series Made in UK All the 17th Edition and PAT products shown in this catalogue are engineered and built at our factory in Dover. Megger employs over 300 people at this site all of whom are busy designing, developing, testing and assembling the products that you use. As a professional electrician, you have a right to demand the very best electrical test equipment. By specifying Megger, not only will you get the best, but you’ll also be supporting a great British success story. Innovative test and measurement product of the year Measures the performance of a digital network. See page 33 PAT400 series downloading portable appliance tester The fastest tester in its class. See details on page 20. Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers Insulation testers Industrial insulation testers The introduction of complexity is always an opportunity; an opportunity for the industry to solve customers’ problems and make money. NET200 network qualification tester MFT with MFT with certification certification Loop testers Finding faults is big business RCD testers As you are aware, in our industry interruptions in power supply is a major irritation for consumers. That’s why the utility companies have imposed on them a limit to number of customer hours that can be lost. Faults don’t only occur on the HV distribution network, but are common in LV systems, due to broken cables and poor joints. In addition, problems with the mains and waste water pipes are becoming more and more frequent as installations age. In 2012, Megger acquired the biggest name in fault finding test equipment, SEBAKMT. SEBAKMT brings to Megger unquestionable expertise in the areas of cable condition monitoring, sheath testing and fault location on both HV & LV systems. It has introduced a new range of water leak detection test equipment to the Megger portfolio for the first time. In addition, the EasyLoc range of buried services and cable avoidance tools now offer a sophisticated solution for tracing a cable route or preparing a site - preventing those expensive mistakes with a digger! PATs Certification software The TDR1000/3 was chosen by a panel of independent industry specialists because it simplified the use of time domain reflectometry for fault finding in LV cables. The ease of use of the instrument was paramount in the design criteria and resulted in this low cost solution now being accessible to companies and contractors, who would have previously looked to hire in dedicated fault location specialists. Meter test box Voltage detector, Solar tester Accessories For more information see page 31 Clamp and multimeters Don’t miss out! Keep in touch with Megger The warranty of many Megger products can be upgraded to three full years free of charge, simply by registering the purchase of the product. So register your product to allow us to offer you full technical support and a free three-year warranty. Follow us on Twitter at www.twitter.com/meggeruk Watch our videos on YouTube at www.youtube.com/meggeruk Find us on Facebook at www.facebook.com/meggeruk Or visit our website at www.megger.com/uk Trying to decide which Megger tester is best for you? Earth testers Services and leak detectors Why not call the Megger technical desk? They’ll talk through your needs and the way you work and help you make the right decision for your business. Call 01304 502 102 Cable fault locator Network performance tester Prices 2 NEW PRODUCTS VALUE FOR MONEY 3
  • Multifunction testers MFT1700 series The new MFT1700 series is tough, even tougher than its popular predecessor. It won’t go bang when connected across phases, when it gets dropped or bounced, when it’s used in the rain, when the wrong range is selected or when accidentally connected to live circuits – even with the test locked on! Dust and rain proof to IP54, the MFT1700 series offers CAT IV safety, meaning that you can use it in any environment without a second thought. To make it more convenient, test buttons are located at either end of the tester meaning you can use the hand that is available to initiate testing, or you can use the new CAT IV probe with test button if you prefer. Even the carry case has been re-thought. There is now room for not only for the meter and leads, but also a certificate pad, wire cutters and a handful of screwdrivers. Loop testing ranges n  and 3-wire non-trip 0.01Ω L-PE 2 n  -PE 48 V to 280 V, 45 Hz to 65Hz L n  on’t trip 6 A MCBs W n  FC or PSCC measurement at same time as loop resistance P n High current loop testing L–L and L-N n L-L 48 V to 480 V, 45 Hz to 65Hz dependant on model n Auto-start loop test Features MFT with MFT with certification certification Electrical Electrical test kits test kits RCD testing ranges n  uto RCD on MFT1720 and MFT1730 A n  CD ramp test to measure RCD trip current R n  ype A, AC, B, Selective, programmable and 3-phase RCDs T dependant on model n  uto-start RCD test A Usefully the MFT1700 series has test buttons at both ends of the tester, so there is always one to hand. Continuity and resistance testing range n  00 mA test with an option of 15 mA on MFT1720 and MFT1730 2 n  uto-start continuity test A n  asy test lead null�– stored even when switched off E n  ast buzzer with adjustable threshold on MFT1720 and MFT1730 F n Resistance measurement from 0.01 Ω to 99.9 kΩ Insulation testing ranges n 100 V, 250 V, 500 V and 1000 V dependant on model n Test voltage displayed with insulation resistance measurement n Adjustable buzzer threshold n 25 V or 50 V test inhibit option n  rotection against live circuits up to 600 V even when test P locked�on MFT MFT 1700 Series Colour-coded selection knobs make sure you are in full control of testing. Large brightly backlit display shows 2 parameters at a time like loop impedance and PFC. MFT1710 MFT1720 MFT1730 Communications on MFT1730 n Bluetooth downloading n On-site option n On-board memory Rechargeable n Cells rechargeable in situ on MFT1730 4 MULTIFUNCTION TESTERS Continuity and resistance range 200 mA n 15 mA Easy lead null n Auto-start continuity test n Adjustable buzzer threshold n n n n n n n n n n n Loop testing ranges 2-wire no-trip test L-PE n 3-wire no-trip test L-PE n PSCC or PFC calculation displayed with loop resistance n L-PE 48 V to 280 V, 45 Hz to 65 Hz n High current 2-wire testing n L-L / L-N 48 V to 480 V, 45 Hz to 65 Hz L-N 48 V to 280 V, 45 Hz to 65 Hz n 20 kA fault current n Zmax value Calculated R1 + R2 value n n n n n n n n n n n n n n n n n n n n RCD Testing range ½I, I and 5I Test n n 0º + 180º phase angle n n Auto RCD testing n Ramp test n n Type AC, A and S RCDs n n Type B RCDs Programmable RCDs n 3-phase RCDs n Touch voltage display 0 - 230 V n n n n n n n n n n n 10 V – 600 V a.c. and d.c. voltage n n Trms measurement Frequency 15 Hz – 400 Hz n n Phase rotation n n n n n 3-pole earth electrode 25 V and 50 V output voltage Ground noise voltage check n n n Test lockout Safe contact detector Live circuit warning Auto discharge n n n n Analogue arc display n n Large, easy-to-read, backlit display n n Current measurement with optional clamp n Test probe incorporating test button n Rechargeable FREE calibration certificate n n Warranty upgradeable to 3 years FREE n n Dust and weatherproof to IP54 n n Safety rating CAT IV 300 V CAT IV 300 V MFT series accessories n n n n n n Additional benefit 3-pole earth test on MFT1730 n Tests unconnected earth electrode resistance 1000 V n 500 V n n 250 V n n 100 V Test voltage display n n Adjustable buzzer threshold n Intelligent safety system Large bright dual parameter display n Displays test voltage at the same time as insulation resistance n Displays loop resistance and prospective fault current n Enhanced viewing angle with intelligent backlight Insulation test ranges Earth testing bit.ly/MFT1700 Voltage, phase rotation and frequency test range n 10 V – 600 V a.c. / d.c. Trms on MFT1730 n Phase rotation on MFT1720 and MFT1730 n Frequency measurement 15 Hz to 400 Hz n Touch voltage Combined loop & RCD testers Insulation testers Voltage frequency and phase rotation range Scan with your smartphone to see a demonstration of the MFT1700 series or for more go to Carry case has extra space so you can store tools as well as test leads, and even a certificate pad. Part P kits P Part Combined kits loop and RCD testers n n n n n n n n Loop testers RCD testers 1001-975 3-wire 10 A fused test lead set PATs Certification software Meter test box 1001-991 3-wire lead test set Voltage detector, Solar tester Accessories Clamp and multimeters 1001-810 3-wire earth electrode test set Earth testers Services and leak detectors n n n n n n n n CAT IV 300 V Industrial insulation testers Cable fault locator 1002-490 Red, blue and green probes and clips Network performance tester Prices MULTIFUNCTION TESTERS 5
  • Multifunction tester with certification software MFT1730 On-site kit Electrical test kits MTK 300 series And because you asked for it, the MFT1730 is a rechargeable instrument. Megger MTK300 test kits give electrical contractors all they need to perform electrical inspection and testing for single and three phase operations. The kits consist of three instruments, an MIT insulation tester, an LTW 2-wire non-trip earth loop tester and an RCDT residual current device tester, each with batteries fitted, in a smart case, with a full set of test leads and calibration certificates. Three kits are available: MTK310, MTK320 and MTK330. Megger has changed the MFT options on result storage and downloading. The MFT1730 offers you both On-site certificate filling by sending your current result to a storage device, smartphone, PDA, notebook or laptop, there and then on site, or the ability to store the results of your tests to download to your computer off site. The MFT1730 uses Bluetooth technology to communicate because it’s fast, effective and there are no additional leads to store. The MFT1730 On-site not only incorporates the form filling software, but also includes the 3 pole earth resistance testing kit, making it the best-value electrical testing package on the market. This is the ultimate installation testing package, with every-thing you need in one tough easy to use kit, 2 and 3-wire non-trip loop testing, RCD testing, insulation and continuity testing with resistance measurement, the MFT1730 adds True rms voltage measurement, frequency indication and phase rotation. It even includes 3 pole earth testing to make the kit complete. It won’t go bang when... n onnected across phases c n  gets dropped it n  sed in the rain u n  ccidently testing live circuits a n electing the wrong test range s In a scene reminiscent of a James Bond movie, an aluminium flight case recently came flying from the window of a speeding van on the M69 motorway. The case contained the latest in electrical testing technology, in the form of a Megger MTK320 electrical contractors’ test kit that had been stolen from a vehicle belonging to a leading electrical training provider. Despite a rough landing at speeds close to 70 mph, the three testers that make up the kit survived their ordeal completely unscathed. A thorough check in the Megger calibration laboratory showed that none of the instruments needed even the slightest of adjustments. Now that’s what we call tough! MFT MFT 1700 Series MFT with MFT with certification certification Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers MTK310 MTK320 MTK330 Insulation testing (see pages 10 and 11 for technical data) MIT310 n MIT320 n MIT330 Insulation testers n Loop testing (see pages 14 and 15 for technical data) LTW315 n LTW325 n LTW335 The complete on-site testing kit includes all you need n n n n n n n n n n n n 2-wire non-trip loop testing 3-wire non-trip loop testing Fast 2-wire high current loop testing Insulation testing  ontinuity and resistance C measurement Single and 3-phase RCD testing 3 pole earth electrode testing  rue rms voltage and frequency T measurement Phase rotation Test results storage  owerSuite On-site certification P software Rechargeable batteries n Industrial insulation testers RCD testing (see pages 16 and 17 for technical data) RCDT310 n RCDT320 n RCDT330 n Loop testers n n n n n n n RCD testers Rubber armoured Weatherproof to IP54 Test leads included Calibration certificates included Warranty upgradeable to 3 years FREE Batteries included Smart brief case n n n n n n n n n n n n n n PATs Certification software MTK310: Standard electrical test kit n MIT310 Insulation and continuity tester n LTW315 Earth loop tester Meter test box n RCDT310 RCD tester MTK320: Advanced electrical test kit Voltage detector, Solar tester n  IT320 Insulation and continuity tester with insulation and M continuity limit alarms n LTW325 Earth loop tester with R1+R2 and Zmax measurement n RCDT320 RCD tester with Programmable RCD testing capability Accessories MTK330: Result storage and downloading test kit Clamp and multimeters n  IT330 Insulation and continuity tester as MIT320 but M with storage and downloading Accessories n  TW335 Earth loop tester as LTW325 but with storage L and downloading Earth testers n  CDT330 RCD tester as RCDT320 but with storage R and downloading Services and leak detectors For more information go to Cable fault locator bit.ly/MTK300 For more information go to Network performance tester ICLAMP 100 A current clamp bit.ly/MFT1730OS Prices 6 MULTIFUNCTION TESTER ELECTRICAL TEST KITS 7
  • Part P kits PPK200 series How it works PPK210 Comprises the MIT310 insulation and continuity tester which tests at 250 V, 500 V and 1000 V, and the LRCD210 Loop and RCD tester. The kit comes complete with test leads, carry and storage case and free calibration certificates. The separation of live and dead testing that you find with the PPK test kits is really helpful if electrical testing is not your main line of business. Selecting the tester for live circuits reminds you of the safety implications of working with live circuits. Meanwhile you know you are working with the best when you insulation test with a Megger tester. The MIT310 insulation tester and LRCD210 loop and RCD tester will take the bashing that testers receive when they are on site. They are rubber armoured, and have an integral solid lid to cover the display. Choose the PPK210 Part P kit to certify an installation to Part P of the Building Regulations. The included MIT310 insulation tester provides all required insulation test voltages, enabling testing of SELV and PELV circuits at 250 V d.c. and standard installation wiring at 500 V d.c. The LRCD200 series is the latest generation of combined non-tripping loop test and RCD test instruments. They provide simple, affordable and flexible test tools for electrical contractors testing energised circuits. The instruments are supplied with a free Megger calibration certificate. n  Safety interlock to prevent unsafe connection of the test leads n  PFC calculation and display n  phase safe – even when connected across phases, both you 3 and the tester will remain safe M  IT320 insulation and continuity tester Comprises the MIT320 insulation and continuity tester and the LRCD220 Loop and RCD tester. PPK220 gives you all the capability of the PPK210 and adds extra functionality. n Buzzer disable n  ontinuity limit alarm C n nsulation limit alarm I n Frequency measurement n Resistance measurement n Backlit display n Backlit ranges n  emote switch probe R Both LRCD210 and LRCD220 testers offer LRCD220 Loop and RCD tester Loop testing n  uto RCD testing A n  000 mA RCD test capability 1 n  hase to Phase loop testing P n  hase rotation display P PPK220 n Non-tripping 3 wire low current loop test provides measurements from 0.01 Ω to 2 kΩ n RCDs and RCBOs rated at 30 mA or less are not tripped when loop impedance testing n High current 2-wire fast loop test (LRDC220 only) n 415 V Phase to phase loop measurement (LRCD220 only) n Auto-ranging tests n PFC button shows calculated PFC/PSCC result without re-testing n Supply voltage displayed on connection to circuit n Supply frequency measurement n  Touch voltage limits and indication PPK210 PPK220 Insulation testing (see pages 10 and 11 for technical data) MIT310 n MIT320 n Loop and RCD testing (see page 9 for technical data) n LRCD210 n LRCD220 Megger calibration certificate Full set of test leads Instrument and document carry case Batteries included Warranty upgradeable to 3 years FREE n n n n n n n n n n MFT MFT 1700 Series Combined loop and RCD testers LRCD200 series LRCD210 LRCD220 Loop test Non tripping loop test n PFC calculation and display n Single phase testing n Phase to phase testing High current loop test 3 phase safe n Voltmeter n RCD test 1⁄2 x I test n 1 x I test n 5 x I test n Touch / contact voltage display n Selectable 25/50 V touch voltage n 10, 30,100, 300, 500 mA ranges n 1000 mA A, A selective, AC and AC selective RCD tests n Automatic RCD testing Selectable phase 0/180 n Ramp test (20 % to 110 %) n n n n n n n n n n n n n n n n n n n General test Frequency n Phase rotation Backlight n n n Working voltage 230 V n Working voltage 110 V and 230 V Free calibration certificate n Dust and weather proof to IP54 n Warranty upgradeable to 3 years FREE n n n n n n MFT with MFT with certification certification Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers Insulation testers Industrial insulation testers Loop testers RCD testers PATs RCD testing n 10 mA to 500 mA RCD testing, 1000 mA on LRCD220 n 1⁄2 I, 1 x I, 5 x I RCD test n Tests Type A, A Selective, Type AC & AC Selective n 0°/180° selection n Ramp testing n 25 V or 50 V Touch voltage selection n Optional Touch voltage display Certification software Meter test box Voltage detector, Solar tester For more information go to bit.ly/PPK200 LRCD series accessories Special features on all testers Accessories Clamp and multimeters n Thick rubber armoured case n Clear colour coded ranges Earth testers n Large easy to read displays n  uper grip test leads with lock on S croc clips 1001-883 3-wire in to 1 plug test lead set 1001-977 2-wire 10 A fused test lead set Services and leak detectors n Tough n Easy to use Cable fault locator n 3-phase safe n Weatherproof n Hands free testing For more information go to 6220-740 UK mains test lead set n Hard carry case 1001-976 2 wire test lead set Network performance tester bit.ly/LRCD200 Prices 8 PART P KITS  COMBINED LOOP AND RCD TESTERS 9
  • Insulation and continuity testers MFT MFT 1700 Series Features MFT with MFT with certification certification MIT300 series The Megger insulation testers are like no other tester you have used The Megger insulation testers will take the bashing that testers receive when they are on site Your safety is Megger’s number one concern They are rubber armoured and have an integral solid lid to protect the display. Electrical Electrical test kits test kits n  Safety interlock to prevent unsafe connection of the test leads The heavy-duty hinge allows the lid to be locked away beneath when in use, making it easy to use and impossible to lose. And you don’t need to pull out the test leads to shut the lid. These safety features look after you and the tester – n  Safe contact detector keeping you and your tester safe during continuity testing if it’s accidentally connected to a live circuit Handy neck strap for hands free operation Clear range selector for poor light conditions Double hinge keeps screen free from scratches or swings under to snap out of sight n  Live voltage warning alerts the user to a circuit voltage over 25 V when insulation testing The Megger MIT insulation testers are easy to use and quick to learn – There are no buried functions, so it is easy to use these insulation testers. –  Prevents insulation testing when circuit voltage is greater than 50 V The colour coding helps test selection, speeding up testing time and helping you identify faults fast. Hands free operation Combined loop & RCD testers n  Safety lockouts – Shutter to prevent hazardous lead combinations Part P kits P Part Combined kits loop and RCD testers The quick start guide in the lid keeps all the basic information at hand if you need it. How it works Prevents continuity testing on live circuits MIT300 series insulation testers are well balanced to hang comfortably around your neck enabling hands free operation when you need it. The continuity test and buzzer start automatically when you connect to a circuit, saving you time. Insulation tests can be started using a switched probe or the test button on the front of the tester. The best place for a test button is on the probe. By using a switched probe rather than a standard one there is no longer a need to look away from the probe to find the TEST button on the instrument, or use a third hand if both are already holding the probes. Simply press the button already under your finger. Definitely safer and quicker. Insulation testing MIT300 MIT310 MIT320 MIT310A MIT330 Analogue 250 V n n n n n 500 V n n n n n 1000 V n n n n Test range 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ 1000 MΩ Insulation limit alarm 0.01 MΩ to 1000 MΩ n n Continuity testing Continuity to 100 Ω n n n n n Continuity buzzer n n n n n Lead null to 9 Ω n n n <1⁄2 Ω n Adjustable buzzer 1 to 100 Ω n n Audible buzzer disable n n Voltage measurement Volts AC/DC 600 V 600 V 600 V 600 V Resistance measurement 10 Ω to 1 MΩ range n n 10 Ω to 2 KΩ range n Features Voltage warning n Default voltmeter n n n n Backlit display n n Backlit selector ranges n n Locking test button n n n n n Auto power-down n n n n Switched test probe n n Data storage n Download via USB port n IP54 weatherproof n n n n n Accepts rechargeable batteries n n n n n Included accessories 2 wire lead set Free calibration certificate Warranty upgradeable to 3 years FREE n n n n n n n n n n n n n n MIT series accessories Industrial insulation testers Loop testers RCD testers PATs Certification software Meter test box Voltage detector, Solar tester Accessories MIT320 comes with switched probe and calibration certificate Clamp and multimeters Special features n Thick rubber armoured case 1002-491 Red and black probes and clips n Clear colour coded selectors Earth testers 1002-001 2 wire test lead set n Large, easy to read display Services and leak detectors n  Super grip test-leads with lock on croc clips Tough lid prevents damage to the display n Auto-start continuity test n Tough and easy to use n Safe 1002-015 2-wire 500 mA fused test lead set n Weatherproof 1001-884 Remote switched probe with special plug n USB downloading on MIT330 Cable fault locator Network performance tester For more information go to bit.ly/MIT300 See page 12 and 13 for our industrial insulation testers 10 INSULATION TESTERS Insulation testers Prices INSULATION TESTERS 11
  • Insulation and continuity testers MIT200 series MIT220 and MIT230 are two of the smallest insulation testers available Both products have a combination of digital readout and analogue display, using Megger’s patented DART display technology. The display includes a clear, accurate digital readout, and an analogue pointer response for evaluating circuit charge and discharge characteristics. The tough ABS instrument housing is designed to withstand the rigours of hard use, whilst small enough to drop into your pocket when not in use. A low battery warning indicator gives advanced warning of exhausted batteries. for industrial maintenance and telecommunications Continuity testing n Automatic continuity testing is performed at 200 mA to ensure compliance with international requirements. No need to press the test button n All instruments will measure up to 100 Ω on continuity, of which 0-10 Ω is performed at greater than 200 mA n Lead null is possible up to 9.99 Ω ensuring the ability to null fused test leads as well as standard leads n Voltage protection should you touch a live circuit n Continuity buzzer provides a means of rapid cable testing and circuit identification, with voltage protection should you accidentally touch a live circuit n The buzzer operates at a 5 Ω threshold Insulation testing n There is a choice of two or three test voltage ranges providing an ideal solution to most low voltage insulation testing applications n Insulation measurement up to 1000 MΩ on all ranges n Auto discharge ensures all circuits are safely discharged after testing n 1000 V insulation test ranges have a high voltage warning prior to test voltage being applied MFT MFT 1700 Series Insulation and continuity testers MIT400 series Continuity testing Insulation testing n 50 V to 1000 V insulation test voltages available with resistance to 200 G Ω n Unique 10 V to 100 V variable voltage tester (MIT40X) n Test lock - Locks insulation test on n Actual test voltage is displayed as well as insulation result simultaneously n Analogue arc replicates the response of a moving coil display n Polarisation Index (PI), Dielectric Absorption Ratio (DAR) and timer functions on most models n Silicone leads prevent errors on high G Ω ranges n Test inhibit prevents insulation testing if voltages in excess of 50 V or 75 V on telecoms testers are present. Live circuit detection and protection n Insulation buzzer - Preset the buzzer to an insulation resistance limit from the setup menu Special features MFT with MFT with certification certification n Auto test on contact enables real two handed operation n A choice of 200 mA or 20 mA continuity test currents to increase battery life n Lead null - up to 9 Ω of resistance n Buzzer - ON-OFF selected by simple push button n Buzzer limit adjustable from 1 Ω to 20 Ω in 5 steps Special features Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers n CATIV 600 V n TRMS voltage measurement n  I, DAR and timer measurement P and timer modes n Remote switched probe Insulation testers Industrial insulation testers MIT400 series accessories n Exceptional value for money Electrical Electrical test kits test kits Loop testers n  ocket sized tester P n  ive circuit protected L RCD testers PATs 1002-001 2 wire test lead set For more information go to bit.ly/MIT200 1001-878 Switched CATIV 600 V probe Certification software MIT220 MIT230 250 V and 500 V test ranges to 1000 MΩ Meter test box n 250 V, 500 V and 1000 V test ranges to 1000 MΩ n Continuity (200 mA) measurement n n Voltage detection n n Intelligent safety system n n Fast buzzer range n n Display backlight n n CATIII 600 V n n IEC61010 n n n n Warranty upgradeable to 3 years FREE 1002-015 2-wire 500 mA fused test lead set Scan with your smartphone to see a demonstration of the MIT400 series or for more information go to 1002-491 Red and black probes and clips bit.ly/MIT400 Industrial maintenance insulation and continuity testers Telecommunications insulation and continuity testers Voltage detector, Solar tester Accessories Clamp and multimeters MIT400 MIT410 MIT415 MIT420 MIT430 MIT40X MIT480 MIT481 MIT485 250 V, 500 V and 1000 V insulation test n n n n n n MIT200 series accessories 50 V and 100 V insulation test n n 10 V , 25 V, 250 V and 500 V insulation test n n n n n Earth testers 10 V to 100 V in 1 V steps n Resistance to Continuity 0.01 to 200 Ω Live circuit warning 20 GΩ 100 GΩ 50 GΩ 200 GΩ 200 GΩ 20 GΩ 100 GΩ 200 GΩ 200 GΩ n n n n n n n n n 50 V 50 V 50 V 50 V 50 V 50 V 75 V 75 V 75 V n n Polarization Index PI n n n n n n Frequency measurement n n n n n n Capacitance measurement n n n n Distance by capacitance n n Data storage n 1002-015 2-wire 500 mA fused test lead set n n Dielectric absorption rate DAR n 1002-001 2 wire test lead set n n n n Bluetooth downloading n n CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V CATIV 600 V FREE calibration certificate n n n n n n n n Safety n n n n n n n n n Cable fault locator Network performance tester n Warranty upgradeable to 3 years FREE 12 INSULATION AND CONTINUITY TESTERS Services and leak detectors INSULATION AND CONTINUITY TESTERS 13 Prices
  • 2-wire non-tripping loop testers Three-phase safe LTW series The instruments will operate from 50 v phase to earth, up to 2 wire testing 440 v phase to phase. The loop test is performed with only 2 test leads. This can be either: n Phase to Earth n Phase to Neutral n Phase to Phase (depending on model) Testing is simple. There is no need for a third wire which could cause confusion in identifying the part of the circuit under test. High resolution test Non-trip loop testing LTW425 offers a high current, high resolution loop test to three decimal places (0.001 Ω). PFC Display All instruments can calculate PFC and PSCC up to 20 kA and the LTW425 can calculate up to 40 kA using the 0.001 high current, resolution test range. High current loop tester LT300 MFT MFT 1700 Series Special features MFT with MFT with certification certification n High current loop testing The LT300 offers high current loop testing over a wide range of frequencies and supply voltages with simple, fast, two wire operation. n  ide range of frequencies W Frequency range n CATIV 300 V Electrical Electrical test kits test kits n Wide range of supply voltages Part P kits P Part Combined kits loop and RCD testers Supply frequency is indicated upon connection and the LT300 will automatically set to the supply frequency either 16 Hz, 33 Hz, 50/60 Hz, 125 Hz or 400 Hz. Testing will commence automatically. Combined loop & RCD testers Loop measurement LTW series testers do not trip working RCDs or RCBOs of 30 mA or greater, using the non-trip loop test. Two loop impedance ranges are provided. 20 Ω - Resolution to 0.01 Ω 200 Ω - Resolution to 0.1 Ω Noise detection on non-trip tests LTW uses sophisticated noise detection circuitry which continually monitors the supply during a loop test to ensure the accuracy of the result has not been affected by electrical noise from plant and services. Two operational modes are available: a)  erforms a 10 second test and if noise is detected a warning P is displayed. b) Automatically extends a test to improve the accuracy. Insulation testers Supply voltage Operational supply range extends from 50 V to 550 V (400 V @ 16 Hz), with a warning for voltages over 330 V highlighting accidental phase to phase connections on a nominal 230 V system. Industrial insulation testers Loop testers LT300 series accessories High current loop testing For supplies that are not RCD protected the high current test can be used, as there is no risk of tripping the RCD. RCD testers The popular LTW325 comes complete, ready for work Auto start An auto-start function will start the test as soon as the circuit voltage is detected, removing the need of a third hand and allowing for much faster testing. PATs Special features 1001-976 2 wire test lead set n Uses only two wires to loop test 6220-810 UK mains test lead set Certification software 1001-977 2-wire 10 A fused test lead set For more information go to n Will not trip RCDs while loop testing n Will not take out 6 A MCBs n Clear easy to read display n 3-phase safe n 50 V to 480 V operation n PFC display n Stable test results n USB downloading on LTW335 n Max Z facility, not on LTW315 n alculated R1 + R2, not on C LTW315 bit.ly/Megger_LT300 Loop testing Features LTW315 LTW325 LTW335 LTW425 LT300 2-wire non-tripping loop testing n n n n 2-wire high current, fast, loop testing n n n n 110 V to 280 V applications n n n 50 V to 440 V applications n n n n 50 V to 550 V applications Phase to phase testing n n n PFC range 20 kA n n n n PFC range 40 kA n Resolution 0.01 ohm n n n n Resolution 0.001 ohm n Automatic noise detection n n n n Automatic test start n n n n Frequency measurement n n n n 16 Hz to 400 Hz operation Max Zs display n n n Calculated R1 + R2 display n n n n n n n n n 14 LOOP TESTERS n n n Back lit display n n Built-in fold away cover n n Quick start guide in cover n n Test result storage Downloading of test results Accepts rechargeable batteries n n n n n n n n n n n n n n n Storage and carry case 2-wire lead set complete with crock clips Mains socket lead set Free calibration certificate n n n n n n n n n n n n n n n n n Optional Optional Standards IEC61010-1 CATIV 300 V EN61557 Weather- and dust-proof to IP54 Warranty upgradeable to 3 years FREE n n n n n n n n n n n n n n n n n n n n Accessories Clamp and multimeters Included accessories bit.ly/LTW_series Voltage detector, Solar tester n For more information go to Meter test box Earth testers Services and leak detectors Cable fault locator Network performance tester Prices LOOP TESTERS 15
  • RCD testers RCDT300 series Special features The Megger RCD testers provide the full solution to RCD testing MFT MFT 1700 Series n Clear LED polarity indicator The RCDT tests not only Type A and Type AC RCDs, but also the selective (time-delayed) variants of both types, performing 1⁄2I, 1I and 5I tests on RCDs rated at 30 mA, 100 mA, 300 mA and 500 mA tested at 0° or 180°. The RCDT320 offers additional tests for RCDs rated at 10 mA and 1000 mA. Touch voltage is measured at the start of a test, and will automatically inhibit if it exceeds the preset level. Touch voltage inhibit is selectable from 25 V to 50 V. Save your valuable time RCDT320 offers additional time saving features. Auto RCD testing – RCDT320 will automatically cycle through the 1⁄2I, 1I and 5I tests at 0° or 180° recording the results, so you can stay with and reset the RCD. This means the job gets done faster, saving not only your time but your legs as well! Ramp testing to measure the trip current of an RCD – the test current is slowly increased from 1⁄2I to 1I+10%. The trip current is held on the display, making it quicker and easier to diagnose nuisance tripping. RCDs on 110 V (55 V - 0 - 55 V) centre tapped site supplies can be tested by the Megger RCDT320 due to its wide operating voltage range of 50 V to 280 V. Features MFT with MFT with certification certification n Thick rubber armoured case Electrical Electrical test kits test kits n Large, easy to read display n  uper grip test-leads with lock S on croc clips Shutter mechanism makes it easy to use the right leads n Tough n Easy to use Heavy duty hinge locks away underneath n Safe Clear range selector for poor light conditions n Weatherproof to IP54 Clear LED polarity indicators help you get the right wiring and test lead connection Combined loop & RCD testers n Hands free auto-RCD testing n USB downloading on RCDT330 Your safety is Megger’s number one concern These RCD testers have built in safety features to look after you and the tester – n  Safety interlock to prevent unsafe connection of the test leads n  Test inhibit, if the supply voltage exceeds 280 V n  phase safe – even when connected across phases, both you 3 and the tester will remain safe n  LED connection indicators display correct test lead connection, making sure it is right first time Megger RCD testers will take the bashing that testers receive when they are on site They are rubber armoured and have an integral solid lid to cover the display. The lid has a heavy-duty hinge that locks away underneath when in use, making it easy to use and impossible to lose. And you don’t need to pull out the test leads to shut the lid. Part P kits P Part Combined kits loop and RCD testers Insulation testers How it works Use the ‘ramp test’ to identify nuisance tripping RCDs. An overly current sensitive or faulty RCD can cause nuisance tripping of the RCD, which can be very difficult to locate. A current clamp meter is not fast enough. By testing with a ramp test, the test current is slowly increased until the RCD trips. The tester displays the trip current in milliamps (not the trip time). If this is too low, replace the RCD. Industrial insulation testers Loop testers RCD testers PATs Megger RCD testers are so easy to use and quick to learn n  There are no buried functions, so they are easy to use n  The colour coding helps test selection, speeding up testing time and helping you identify faults fast n  The quick start guide in the lid keeps all the basic information at hand when you need it Certification software Meter test box RCDT300 series accessories 1001-976 2 wire test lead set 6220-740 UK mains test lead bit.ly/RCDT300 16 RCD TESTERS 1001-977 2-wire 10 A fused test lead set RCD testing 1 ⁄2I, 1I, 5I RCD trip time test n n Selective breakers n n Type A and AC breakers (1⁄2I, 1I, 5I) n n Programmable RCD 30, 100, 300, 500 mA RCDs n n 10, 1000 mA RCDs n RCD trip current test (RAMP) n Auto RCD test n 0°/180° polarity selection n n Touch voltage selectable n n Max touch voltage (25 V/50 V) n n Operating range 100 to 280 V n Operating range 50 to 280 V n n n n n n n n n n n n Features 3-Phase safe n n Large clear display n n Backlight n Battery status indication n n Auto power down n n Fuse blown indication n n Data storage Download via USB port IP54 weatherproof n n IEC61010-1 CATIII 300 V n n EN61557 n n n n n n n n n n n n n Accessories included RCDT testers come complete with calibration certificate in a tough carry case For more information go to 1002-490 Red, blue and green probes and clips RCDT310 RCDT320 RCDT330 UK mains test lead n 2 wire test lead with probes and clips Warranty upgradeable to 3 years FREE n Free calibration certificate n n n n n n n n n n RCD TESTERS 17 Voltage detector, Solar tester Accessories Clamp and multimeters Earth testers Services and leak detectors Cable fault locator Network performance tester Prices
  • Portable Appliance Testers PAT300 series A choice of two fast PAT testers which offer the operator manual and automatic operation without the complexity of data storage. The PAT300 series allows the user to select a range of tests, such as those for a CLASS I asset, simply by pressing the “CLASS I“ button, and then initiate the test by pressing the “TEST” button. When the results are displayed they are coded green for a pass and red for a fail. However, if a particular test needs to be repeated, there are direct access buttons dedicated to specific tests. The instant-restart feature speeds testing when moving from one room to another, restarting in exactly the same menu location where it was left. PAT320 is the PAT tester for those electricians who occasionally do testing and don’t want the complexity of database management and are happy to write out certificates by hand. n Instant re-start n 200 mA “soft” bond test and the option of high current 25 A and 10 A bond tests n Test lead null n Flash testing at a choice of 1.5 kV or 3 kV (PAT350 only) n Repeated high current bond testing possible n Insulation testing at 250 V and 500 V n Fully tests 230 V and 110 V appliances n Extension and IEC lead testing, including polarity, earth continuity, L-N continuity and L-N-E insulation n Standard differential leakage test n  Protective conductor or touch current leakage test n  Substitute earth leakage test at 40 V a.c. n Full plug-in 30 mA RCD testing ½ x I, I, 5 x I n Integral fuse checker Of particular interest to tool hire companies, as well as service and repair organisations, is the PAT300 series ability to run high current bond tests virtually continuously, without the fear of the tester over heating. Because the PAT testing market is driven by the “Electricity at Work” regulations and not by the economy, there is an excellent opportunity to boost your turnover by introducing a PAT testing and repair service. To make it easier for you to change direction, Megger has introduced the “Business in a box”. This is a new concept in electrical test products, not just selling you the tester but helping you find business. Many customers have found these pre-packed businesses useful in making money again in the teeth of the recession. There are two potential businesses in a box, the PAT320 manual version, and the PAT420 computerised version. In the box you will find everything you need to diversify the direction of your business and boost your income. 1. Tough PAT tester that will give you years of service PAT350 is similar to the PAT320 but with the added benefit of flash testing. Because of its high through-put capabilities and the speed at which it gives results, it is ideal for applications such as tool hire companies and service centres. MFT MFT 1700 Series Business in a box Why diversify your business into PAT Testing? 2. Leads and adaptors you need to do the job successfully 3.1  The PAT320 comes with duplicate test report book for users to certify results and issue to their customer Scan with your smartphone to see a presentation of the PAT business in the box or for more information go to Special features bit.ly/PAT320_BIAB bit.ly/PAT420_BIAB MFT with MFT with certification certification Electrical Electrical test kits test kits 3.2  The PAT420 come with PowerSuite Contractor PAT certification software to manage: Customers n Arrange appointments Assets n Automatic testing n Diary management n Printing certificates n Billing n Repairs estimates 5.  guide to PAT testing – clear step by step instructions on A how to do it 6.  guide to identifying customers and selling to them. A This includes n Where to find and how to approach clients n Details of who, and why they need to be testing their  electrical assets n G  uidelines on what to charge n n P  re-written press releases for you to generate interest n P  re-written letters for you to send to your potential customers bit.ly/PAT300 Insulation testers Industrial insulation testers Pre-designed advert and brochure for you to customise Earth bond test 25 A n n n n n  utomatic or manual testing A 10 A n n n 200 mA n n n Insulation test 500 V n n n n 250 V n n n n Earth leakage test Differential n n n Touch current n n n n Substitute n n n n Operation test 110 V n n n n 230 V n PATs n RCD testers n n Continuous operation Loop testers n Scan with your smartphone to see a demonstration of the PAT300 series or for more information go to Combined loop & RCD testers 4. Roll of 1000 pass labels PAT320 PAT350 PAT320 PAT420 in a box Business in a box Business in a box n ull PAT functionality with the F option of flash test Part P kits P Part Combined kits loop and RCD testers n n  plug-in or lead mounted Full RCD testing n Simple push button control Class I n n n n Class II n n n n Extension test lead n n n n Portable RCD n n n n Fuse test n n n n Test lead null n n n n Operates at 110 V n n n n 230 V n n n n Functional test VA measurement 110 V n n n n 230 V n n n n Test sockets BS1362 n n n n BS4343 n n n n On-board client/locations results database n Download to USB memory stick n Display PATR210 Portable appliance test report book Colour 1⁄8 VGA Colour 1⁄4 VGA n n 1001-227 Fail label roll of 1000 n Combined continuity, earth bond and insulation test lead n n n n 230 V extension lead adaptor n n n n FREE calibration certificate n n n Accessories Clamp and multimeters Earth testers n n Pass labels n n n Services and leak detectors n PC power supply to IEC adaptor 1000-767 415 V 4 pin adaptor lead to BS1363 Voltage detector, Solar tester n Portable appliance test report book 1000-971 Pass label roll of 1000 Meter test box n 1000-766 110 V mains lead adaptor n Automatic tests sequence Accessories n Flash Certification software PowerSuite Professional Contractor PAT certification software with client and asset management and billing n Megger guide to PAT testing n n Megger guide to marketing a PAT business n Cable fault locator n Barcode reader optional Barcode printer Network performance tester optional Prices 18 PORTABLE APPLIANCE TESTERS PORTABLE APPLIANCE TESTERS 19
  • Portable Appliance Testers PAT 400 series n Three PAT testers with full database functionality based on the well received PAT300 series. The PAT 400 series introduces a new level of convenience and speed to PAT testing using onboard test results storage. n With a large, bright and intuitive colour display, the PAT400 series offer sufficient memory for the storage of up to 10,000 assets. The proven long duty cycle, the simplicity of operation and the independently verified speed of test make for the best selling PAT Megger has ever produced. n The menus have been simplified to make operation quicker. Five soft-keys give direct access to frequently used functions making navigation through the menus quick and the tester more productive, offering a greater return on investment. A new feature is the expert and novice modes making testing even faster for experienced user. n n n n n n n n n 10,000 asset on-board data storage Large easy to ready colour screen Instant re-start 25 A, 10 A and 200 mA “soft” bond test Test lead null Repeated high current bond testing possible Insulation testing at 250 V and 500 V Functional VA load test for 110 V and 230 V appliances Extension and IEC lead testing including polarity, earth continuity, L-N continuity and L-N-E insulation Standard differential leakage test plus n  Protective conductor or touch current leakage test n  Substitute earth leakage test at 40 V a.c. Simple RCD test or full 30 mA RCD testing ½ x I, I, 5 x I Integral fuse checker MFT MFT 1700 Series PAT400 series accessories MFT with MFT with certification certification Electrical Electrical test kits test kits 1001-047 Barcode scanner 1000-770 415 V 5 pin adaptor lead to BS1363 (16 A) 1001-046 Pass / fail barcode printer Combined loop & RCD testers 1000-971 Pass label roll of 1000 1000-766 110 V mains lead adaptor For corporate users, the PAT400 series now has an optional security log-in for controlling access to test parameters and limits, while logging the active user within the results database. 1000-767 415 V 4 pin adaptor lead to BS1363 1001-227 Fail label roll of 1000 6220-639 110 V extension lead adaptor Using a standard USB memory stick, results can be quickly backed up for downloading. The asset database is accessible from the tester and with a full QWERTY keyboard, rapid data entry or adjustment is possible. PAT410 PAT420 PAT450 PAT410 is perfect for those happy to bond test solely at 200 mA. The smallest and lightest of the PAT400 series weighs only 2.7 kg. Supply 230 V n 110 V Supply measurement n n n n PAT420 tests both 100 V and 230 V appliances, as well as offering bond testing at all three test currents, 200 mA, 10 A and 25 A. This is the tester of choice for full-time industrial or commercial PAT testers. Earth bond/continuity 200 mA n 10 A 25 A Bond lead null n n n n n n n n n PAT450 adds in the ability to carry out high voltage flash testing at 1.5 kV or 3.0 kV, making it the preferred choice for tool hire companies and service and repair workshops. Insulation test 250 V 500 V n n n n n n Alternative leakage tests Substitute Differential Touch current n n n n n n n n n Functional test VA measurement n n n n n n n n n n n n n n n Special features n  xpert mode to speed up E testing n ecure user log-in option S n ast on-board memory to keep V  you on the job longer n ontinuous operation, no need C  to stop and wait for the tester to cool down n  I nstant re-start as you move from room to room n oft keys to speed you through S  the testing process n  utomatic asset number A  generation n  uick test for instant access to Q  single test functions 20 PORTABLE APPLIANCE TESTERS Industrial insulation testers Loop testers PATs Extension lead tests Earth bond Insulation Polarity Portable RCD tests Flash test 1.5 kV and 3.0 kV n Other features Low-profile light weight n 110 V test connection n Auto test routine n n Manual testing n n Configurable tests times n n Selectable pass limits n n Fuse check n n Large colour display n n n n n n n n n Data handling 10,000 record on-board storage Download to USB memory stick PowerSuite compatible n n n Supplied accessories Scan with your smartphone to see a demonstration of the PAT400 series or for more information go to n n n n n n Certification software bit.ly/Megger_PAT400 Meter test box For PAT420 Business in a box see page 19 Voltage detector, Solar tester Accessories *Testing conducted by Redford Charles Ltd, Rochester, see details at www.redfordcharles.com/resources/ PAT_tester_analysis.pdf” Carry case with lead storage pouch n n n Combined continuity, earth bond and insulation test lead n n n Red extension lead adaptor n n n Flash test lead n FREE calibration certificate n n n Insulation testers RCD testers n n n I ndependent tests* show the Megger PAT400 is at least 8% more productive Part P kits P Part Combined kits loop and RCD testers Clamp and multimeters Earth testers See how to PAT test the Megger way with PAT testing and inspection DVD order no 1002-384 Services and leak detectors Cable fault locator Network performance tester Prices PORTABLE APPLIANCE TESTERS 21
  • Test certification software PowerSuite Professional Meter test box MTB7671/2 Works with all makes of testers actively measuring the output of the meter and confirming it is within the limits prescribed as well as checking the readings Developed over many years and with lots of research into your requirements of a software system, PowerSuite is hugely flexible. The application you purchase today can readily be up-graded, so even misjudging how much you will come to rely on computerisation for your certification is not a risk. As your company grows, so can your system. PowerSuite Lite package is the ideal starting point for a company using computerised certification. With minimal complication and maximum impact. The benefits can be experienced for little cost. Certification bodies like the NICEIC, ELECSA, NAPIT, ECA and others now request evidence of your tester’s accuracy and consistency. The MTB7671 makes that an easy job. n  Tests n  Does the full range of a tester’s capability not trip RCD protected circuits n  ests T to the regulations BS7671, BS EN61557 and IEE On-Site Guide n  hecks C n  Confirms n  Colour Continuity short circuit test current PowerSuite Contractor package will give you everything you need to schedule and invoice electrical inspection and PAT testing certification. PowerSuite Power package gives added breadth to your certification client base by offering more specialised electrical inspection certificates, such as filling stations and security, and for general maintenance by adding ladder, air compressor, fire extinguisher and many other certificates. BS7671, BS EN61557 and IEE On-Site Guide tester requirements >200 mA insulation, continuity, loop, PFC and RCD functions tester’s continued performance coded test functions >200 mA 4 V - 24 V 4 V – 24 V 0.5 Ω 5.0 Ω PowerSuite SME is the networking solution for those with a business of sufficient size to need multiple simultaneous access to the client and certificate database. It is fully flexible with four levels of security, messaging, data entry options, multiconcurrent user access, etc. Insulation test current 1 mA Our market leading help-desk is already looking forward to assisting you. We are there to help you select the version of PowerSuite that is ideal for your business. Call today on 01304 502 106. Pass / fail Indication Insulation test resistances 0.25 MΩ min 0.25 MΩ 0.5 MΩ min 0.5 MΩ 1 MΩ min Part P kits P Part Combined kits loop and RCD testers Pass / fail indication Continuity resistance Electrical Electrical test kits test kits Insulation testers Pass / fail indication Continuity test voltage range MFT with MFT with certification certification Combined loop & RCD testers MTB7671 parameters tested MFT MFT 1700 Series 1 MΩ 1 mA 250 V +25% max 250 V +25% max 500 V +25% max 500 V +25% max For more information go to Pass / fail indication Insulation test voltages 1 kV +25% max 1k V +25% max Lite Lite Contractor On-site Contractor On-site Ultra Power SME Certificate manager including IET, NICEIC, ECA, Select, ELECSA n n n n n Certificate audit trail n n n n n n Client manager n n n n n n Wizard and menu functions n n n n n n Company logo import n n n n n n Document storage including Word, Excel, pdf and many more n n n n n Photo import n n n n n n n n n n n n n n n n n n n n n Additional certificates n n n n Maintenance certificates n n Document design n n Viewer CD n Certification software 10.3.5 Earth Electrode Resistance) n Billing Loop + 180 Ω PATs (IEE On-Site Guide n Reports Loop + 180 Ω 200 Ω max n Identify missing assets Loop + 10 Ω n Organiser n mobile n Local mains impedance Loop + 10 Ω RCD testers 90 MΩ Loop Loop testers 9 MΩ bit.ly/PowerSuite Industrial insulation testers n Image management Networkable with multi-user access n n n n n n n n n n n n n >1999 mS <200 mS 40 mS @ 0° Meter test box 50 mS @180° RCD (5 x I) 10 mS @ 0° <40 mS 20 mS @ 180° Voltage detector, Solar tester How it works Accessories Checking your testers on a regular basis is vital. You can spot a problem before it happens, making sure your meter is ready for use when you want it. But it is important that you check what the tester is putting out. If the test voltage or current is low it doesn’t stress the system you’re testing properly so you’re not testing to the Wiring Regulations. Clamp and multimeters n 3rd party instrument support No trip RCD (I) n Megger 17th data down load RCD no trip (1⁄2I) n Megger PAT data down and up load 10 mA, 30 mA and 100 mA n Multiple data paths RCD currents (I) n Earth testers Real-time Bluetooth results capture n n n n n n Enabled for PowerSuite Ultramobile n n n n n n Drag and drop editing n n n n n n n Manual data entry n n n n n n n Direct data entry n n n n n n n n PDA installation n n n E-mails certificates between mobile device and PowerSuite Professional n n n Additional user licences n bit.ly/MTB7671-2 n n n Imports, exports to PowerSuite Professional For more information go to n n n Smartphone installation Services and leak detectors n n n 30 days 30 days 30 days 30 days Network performance tester n n Additional network licences FREE support Cable fault locator 30 days n 30 days * PowerSuite Ultramobile can only be used in conjunction with one of the other PowerSuite Professional products and is included in the On-site packages. 22 TEST CERTIFICATION SOFTWARE Prices METER TEST BOX 23
  • Photovoltaic kits PVK300 series Volt finder and flashlight VF series AC voltage detector PVK300 kits supply all the instrumentation you require – in addition to your MFT – to site, commission and test a solar PV installation to IEC62446, packed in a single pouch. VF2 Voltage finder has a helpful audible warning PVK320 includes an auto-ranging, CAT IV, 10 A d.c. AVO410 multimeter that allows the short circuit current of a panel to be read directly, as well as the PVM210 PVK330 includes the DCM340 a 600 A a.c./d.c clamp multimeter which speeds the measurement of array stings without the need for disconnection. It can also measure d.c. voltages to 600 V. VF1 and VF2 Volt finder and flashlight Low power consumption – many hours of flashlight illumination from one set of alkaline batteries. Identifying live conductors, finding a break in a wire, verifying a blown fuse while in circuit, and detecting the presence of a.c. voltage. For more information go to bit.ly/VF1_VF2 PVK320 PVK330 AVO410 CAT IV multimeter n DCM340 Clamp multimeter n PVM210 Irradiance meter n n MC3 to MC4 adaptor testleads n n MC4 to 4 mm plug testleads n n For more information go to bit.ly/PVK300 For more information go to The easy-to-use TPT210 will warn of a voltage present even with flat batteries PATs bit.ly/PVM210 n  Single unit for one handed use increasing safety on ladders and roofs n  Perfect for measurement of incident light for PV panel short circuit current calculation n  1999 W/m2 range on 33⁄4 digit LCD display n  Camera mount fixing for accurate placement The pocket-size PVM210 is perfect for use on sloping roofs or at the top of ladders because it has the solar detector built in to the top. This is enhanced by its large clear display and hold function. It is used for initially choosing optimum position for a PV installation and for measuring the solar power for the calculation of short circuit current to confirm the performance of the PV panel for certification. On the rear of the meter is a universal camera thread that allows mounting for precise readings if required, also a protective pouch is included with each instrument. 24 VOLTAGE DETECTOR, SOLAR TESTER Voltage TPT210 TPT220 6 to 1000 V a.c./d.c. in 8 steps 6 to 1000 V a.c./d.c 1 V resolution Continuity Up to 500 KΩ visual and audible Resistance >100 V a.c. Dual coloured LEDs LCD with auto backlight Torch For more information go to n n IP65 protection n n Up to 150 Ω audible buzzer 0 – 2000 Ω n CAT IV 1000 V CAT IV 1000 V Warranty upgradeable to 3 years FREE n n Clamp and multimeters Good practice demands that a two-pole tester is proved on a known live source or proving unit both before and after use. The Megger MPU690 is a convenient method to prove the safe operation of all two-pole testers and Drummond test lamps. n n n n Capable of testing two-pole voltage detectors and test lamps due to 10 W output Step voltage LEDs indicate voltage being generated. 50 V, 100 V, 230 V, 400 V and 690 V Generates a.c. waveform for a true test Compact design that has an integral magnet for attaching to the cabinet encourages routine safety checks Automatic on and off conserves batteries Low battery indication gives ample warning to replace batteries Warranty upgradeable to 3 years FREE Voltage detector, Solar tester Accessories Proving unit MPU690 n Meter test box n Safety rating n Certification software >100 V a.c. Manual RCD trip n Combined loop & RCD testers RCD testers Display Solar PV testing Irradiance meter PVM210 Part P kits P Part Combined kits loop and RCD testers Loop testers Phase indication bit.ly/TPT200 Electrical Electrical test kits test kits Industrial insulation testers Guaranteed not to trip an RCD, the TPT210 is a 2-pole tester which indicates the presence of voltage with an array of LEDs, while the TPT220 uses an LCD display. Both offer additional functions such as voltage display, phase rotation determination without the need to cross probes, continuity and RCD trip test. Safety is paramount with these testers, so they are rated at CAT IV 1000 V, are supplied with GS38 shrouds and the tough body is rated to IP65. It goes almost without saying that they continue to indicate live systems even when the battery is removed. MFT with MFT with certification certification Insulation testers Voltage testers TPT200 series MFT MFT 1700 Series Earth testers Services and leak detectors Cable fault locator Network performance tester For more information go to bit.ly/MPU690 VOLTAGE DETECTOR, SOLAR TESTER 25 Prices
  • Socket interface adaptor SIA10 MFT MFT 1700 Series Socket tester MST210 Sometimes known as a breakout lead, the SIA10 allows sockets to be tested without disassembly. n  revents damage to connections P n Reduces test time n Decoration remains intact n  olour coded for simplicity of use C n  akes testing easy where access to socket is limited M n  emains safe if left inadvertently connected to live supply R MFT with MFT with certification certification n  Simple and effective identification of faulty wiring at sockets n Easy to use n  green and 1 red LED for instant error reporting and fault 2 diagnosis n  Identifies 17 missing wire and wrong connection combinations n Tough and reliable Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers For more information go to Insulation testers bit.ly/ Megger_SIA10 Industrial insulation testers PAT and 17th Edition inspection DVDs n Instructional DVDs on testing and inspecting installations Ideal study aids for anyone enrolled on a C&G2394, C&G2395 or equivalent course n Excellent refresher on best practice for experienced electricians n Phase Sequence Indicator PSI410 Order number DVDs Electrical work on commercial and industrial installations often requires working on motorised machinery with three phase supplies. Correct sequence of the phases is important with certain motors and pumps as damage to brakes and valves will occur in minutes with incorrect phasing. Initial inspection and test of a domestic property The PSI410 is self powered from the supply and requires no batteries. n  LED For more information go to bit.ly/PSI410 26 ACCESSORIES clockwise and counter clockwise phase rotation indication n  Audible indication of direction n Phase condition LEDs n Fused test leads n  Dual phase colour identification n  CAT IV 600 V n  Warranty upgradeable to 3 years FREE PATs DVD200 PAT testing and inspection 1002-384 Certification software For more information go to bit.ly/Megger_DVDs Meter test box Voltage detector, Solar tester The unit has been designed to provide a slow rotational speed of the display to allow easy recognition of the direction of rotation. The PSI410 also features a triple bi-coloured LED display that indicates that all three phases are present. A green LED indicates the phase is present while a red LED shows a missing phase connection. The unit has a tough case designed for an industrial environment and is supplied with long fused test leads with croc-clips and prods. RCD testers DVD100 Initial inspection and test of industrial properties The Megger PSI410 phase rotation indicator provides rapid indication of correct phase sequence utilising a three bicoloured LED display and a specific audible tone. Clockwise rotation is indicated by clockwise rotating green LEDs with a continuous tone and counter clockwise rotation has counter clockwise rotating red LEDs and a warbling tone. Dual phase colour coding has been adopted for the PSI410 to allow ease of use on both Brown / Black / Grey and Red / Yellow / Blue colour coded supplies. Loop testers Accessories Extension test lead and coil Clamp and multimeters n  30 metre and 50 metre versions for direct R2 measurements n  Easy to re-wind cable with tangle-free cable guide n Compact and light design n  Suitable Earth testers Services and leak detectors Compact extension test lead for direct R2 measurements so eliminating the need for crossover connections. The furthest point in the circuit can be easily verified, and every earth point on the circuit checked for integrity prior to energising. Cable fault locator Code 50 m extension lead, green, with 4 mm safety plug ETL50 30 m extension lead, green, with 4 mm safety plug ETL30 Network performance tester For more information go to bit.ly/ETL30_ETL50 Prices ACCESSORIES 27
  • Clamps and multimeters 400 A a.c. clampmeter DCM310 Classic multimeter AVO300 series Easy to read n Manual operation n Low cost n Tough This easy to use clampmeter is ideal to rapidly check the current flowing with the minimum of fuss. AVO410 n  Voltage, current and resistance measurement rms on a.c. functions n uto ranging but with the option of manual A range selection n  ax and min measurements M n ata hold D n  Continuity and diode testing n  μF capacitance and 60 MHz 600 frequency ranges n  Tough rubber holster n  CAT IV 600 V safety n  True Straight forward and tough multimeter n uto-ranging function A n  Separate fuse and battery compartment, allows both to be replaced without breaking the calibration seals n  Rubber-armoured case has an integral stand and hanger n  Large uncluttered display n VO310 has a backlight A n  CAT III 600 V safety MFT with MFT with certification certification DCM320 n CAT IV multimeter MFT MFT 1700 Series 400 A a.c. Clamp multimeter n 20 MΩ resistance range Continuity buzzer n Auto-ranging n  Auto off to conserve batteries Electrical Electrical test kits test kits n Part P kits P Part Combined kits loop and RCD testers The DCM320 is a low cost data hold current clamp and multimeter. It is supplied blister packed complete with test leads, batteries and carry case. For more information go to bit.ly/DCM310_DCM320 Combined loop & RCD testers Insulation testers DCM310 For more information go to DCM320 bit.ly/AVO410 Fork multimeter DCM330 bit.ly/AVO300 n 200 A a.c. Open-Jaw current measurement n 0.1 V to 1000 V auto-ranging a.c. and d.c. voltage measurement n 0.1 Ω to 20.00 MΩ Resistance range n Continuity buzzer and diode check n Non-contact detection of a.c. voltage n CATIV 600 V The Megger DCM330 is suitable for use anywhere where there is a requirement to measure a.c. current in single unshielded conductors less than 16mm diameter, a.c./ d.c. voltages up to 1000 V, or resistances up to 20 MΩ. Earth leakage clampmeter DCM300E Versatile high resolution a.c. current clamp, ideal for checking nuisance tripping RCDs n 4 ranges: 30 mA range (0.01 mA resolution), 300 mA, 30 A and 300 A n 31⁄2 digit LCD with analogue bar graph n Data hold DCM340 n Powerful range of tough multimeters For more information go to 600 A a.c. / d.c. Clamp multimeter n Multimeters series accessories DCM300E is perfect for measuring earth leakage current in a circuit where the RCD repeatedly trips out. The measured result will quickly identify whether the tripping is caused by excessive leakage current, or if the RCD itself is faulty. With its high noise rejection, it can measure leakage differentials, when clamped around the live and neutral of a circuit simultaneously. For more information go to DCM330 n n n n d.c. current range Frequency counter Analogue bar graph Back light Large jaws Auto off to conserve batteries PATs Certification software Meter test box For more information go to Voltage detector, Solar tester bit.ly/DCM340 DCM340 1002-001 Replacement test lead set 1002-015 500 mA fused test lead set AVO300 AVO310 AVO410 DCM310 DCM320 DCM330 DCM340 Current ranges A a.c. 10 A 10 A True rms A d.c. 10 A 10 A Voltage range V a.c. Trms 1000 V V d.c. 1000 V 1000 V 1000 V Resistance range Ω 40 M 40 M Continuity range Buzzer n n 0.6 mA, 6 mA, 6 A 10 A 20 A, 200 A, 400 A 40 A, 200 A, 200 A 400 A 750 V Current ranges a.c. Data hold Max conductor size Safety rating Warranty upgradeable to 3 years FREE 30 mA, 300 mA, 30 A, 300 A. n 40 mm CATIII 300 V n 60 A, 400 A, 600 A 200 V, 600 V 200 V, 1000 V 200 V, 600 V 200 V, 1000 V 400 V, 600 V n 1000 V 600, 6 k, 60 k, 600 k, 6 M 60 M 200, 2 k, 200 k, 200, 2 k, 200 k, 2 M, 20 M 2 M, 20 M n n 400 n n n n n n 27 mm 16 mm 35 mm Auto-ranging n n n Backlit display n n Data hold n n n n Max hold n n n 27 mm Conductor size Other Warranty upgradeable to 3 years FREE Safety rating Services and leak detectors n n n Earth testers n Diode n Clamp and multimeters 400 V, 600 V DCM300E 60 A, 400 A, 600 A n 0.6 mA, 6 mA, 6 A 10 A 28 CLAMP AND MULTIMETERS RCD testers Accessories DCM300E – a high resolution a.c. current clamp Loop testers The DCM340 is an a.c. and d.c. current clamp and multimeter that offers exceptional value and is particularly suited to solar PV commissioning. It is supplied blister packed complete with test leads, batteries, user guide and carry case. bit.ly/DCM330 For more information go to bit.ly/DCM300E n Industrial insulation testers n n n CATIII 600 V CATIV 600 V CATIII 600 V CATIII 600 V CATIV 600 V Network performance tester CATIII 600 V Cable fault locator CATIII 600 V CLAMP AND MULTIMETERS 29 Prices
  • Digital earth testers DET3, DET14C and DET24C Utility detection and location system EasyLoc DET3 series Digital earth testers The Easyloc system is the fast, reliable method to detect and trace underground utility cable runs and pipe networks. It is simple to operate, with features designed to avoid potentially dangerous power cables and other services as effectively as possible. A  ll models include these features n  Extra large selector switch clear display for easy operation in outdoor conditions n  Simple one button operation n  Battery powered with a bar graph indicator n  Noise reduction up to 40 V peak to peak n  P54 rated (water/dust ingress) for extra protection in harsh conditions n  Comes complete with test leads, stakes, batteries, calibration certificate and rugged polypropylene carry case n  Large, Function Basic Standard Passive: power network 50 Hz n n n n n n Radio Active: 33 kHz Line location Depth measurement without transmitter n Maximum Marker Dimensions (W x H x D) Weight n n n DET3TC n ART or selective three pole earth testing kit n 2 and 3 pole testing n Selectable 25 V or 50 V output When used with the optional ICLAMP, allows fall of potential testing without the need to disconnect the electrode under test. n n n > 40 hours 10 x IEC R6 1.5 V EasyLoc Tx Transmitter / Generator n n n n n 33 kHz continuous or pulsed Class leading power output High (0.5 W) and low (0.1 W) power settings Simple push-button control Induction or direct connection Induction in two planes of antenna orientation Loop testers Easyloc Tx transmitter Transmitted power 0.1 W/0.5 W (switchable) Frequency 33 kHz Operating time 6 x IEC R20 1.5 V Weight 2.6 kg Dimensions (w x H x D) 14 x 26 25.5 cm PATs Certification software bit.ly/DET14C_DET24C Mini leak detector HL5 The Hydrolux HL 5 is a professional water leak detection unit offering both visual and audible indication of a leak. It belongs in the jacket of every facilities engineer and manager as an aid to on the spot leak detection. DET24C 1001-810 3-wire earth lead test set RCD testers > 40 hours Power supply For more information go to DET3 series accessories Combined loop & RCD testers Industrial insulation testers bit.ly/EasyLoc bit.ly/Megger_DET3T Part P kits P Part Combined kits loop and RCD testers Insulation testers For more information go to For more information go to n 2.5 kg Operating time n Passive location of power and radio signals Active location of 33 kHz transmitted signals Semi-automatic sensitivity control Depth measurements in active and passive modes Continuous signal strength display Peak indicator “Easy Locate” Comfortable handle in line with utility for comfortable for single-handed operation Large display with auto backlight n Electrical Electrical test kits test kits 10 x 67 26 cm Power supply n Three pole earth testing kit n 2 and 3 pole testing n Selectable 25 V or 50 V output DET3TD offers a complete kit for customers wishing to conduct earth electrode testing using the 2 and 3 pole techniques. n MFT with MFT with certification certification x (33 kHz) n Depth measurement with transmitter EasyLoc Receiver DET3TD n x (33 kHz) Probe location The Easyloc receiver displays the signal level detected with a maximum marker for easy location. The operator works with both the audio signal and the visual confirmation at all times. Depth measurement is possible at the push of a button, even when using Power Mode. DET3TC with optional clamp MFT MFT 1700 Series n Pocketsize n n n n n n n n n n 6220-803 4 right angled adaptors Mute setting (no static noise in the headphones) 3 optimised filter settings Excellent, audio characteristics Optional adapter, for use as a ground microphone Easy, one-button operation Immediate detection of leaks Wireless noise transmission Built-in LED light for night work Wireless range 20 m 10 level LED display Meter test box Voltage detector, Solar tester Accessories Clamp and multimeters Special features Earth testers n  Perfect for the facilities manager to help locate water leaks Services and leak detectors n  Excellent audio characteristics DET3TD DET3TC DET14C DET24C Stakeless testing 3-wire testing n 2-wire testing n n n  optimised filter settings 3 n n  Mute setting (no static noise in the headphones) n n ART (Attached Rod Technique) enabled Resistance range Ω 0.01 to 2000 0.01 to 2000 Earth Voltage range 0 to 100 V n Display Digital Digital 0.05 to 1500 0.5 mA to 35 A 0.5 mA to 35 A Digital n  Wireless noise transmission 0 to 100 V Earth Current range (with optional clamp) A 0.5 mA to 19.9 0.05 to 1500 Digital Datalogging n n  Built-in LED light for night work For more information go to n bit.ly/HL5 Downloading n 30 EARTH TESTERS Cable fault locator Network performance tester Prices Services and leak detectors 31
  • Cable fault locators TDR mark3 series Network Ethernet Tester NET200 Using a Time Domain Reflectometer (TDR) is a well established method for finding the location of faults in metallic power or data cables. In the past TDRs have had a reputation of being expensive and difficult to use but now, the Megger TDR Mark3 series has put paid to that. NET200 is the latest, all-in-one network qualification tool. It measures logical network performance. It provides the roundtrip time (RTT) to measure network speed under dynamic and static configuration protocol and IP scanning to show the information on all the terminals connected into the local network. It can also evaluate the capability of link connections to support specific network speeds and duplexity (half- or fullduplex). An AUTO selection option, fast pulse and built in blocking filter ensures that the most effective selection depending on the range required, helping rapid diagnosis of the TDR trace. In addition on the TDR1000/3 and TDR1000/3P, dual cursors allow complete flexibility, giving the operator full control and instant indication of distance between two points. n n n n n n n n n n The device provides the physical information of the LAN cable under test such as; Cable length, distance to fault (open or short) and wire map (pass, fail). With the graphic user interface supplied by 128x64 LCD and serial communication port, field engineers can easily apply the device to network testing, transfer the stored data to their PCs and print reports via software. Acurate and easy fault finding because of resolution as low as 0.1 m Ultra fast 2 ns pulse for near end fault identification Trace hold and comparison not TDR500/3 Auto selected output impedance (between 25, 50, 75 and 100 Ω) Power blocking filter not required For use on Telecom TNV-3 circuit, or 150 V CAT IV power circuits Environmental protection to IP54 High resolution backlit monochrome LCD Adjustable display contrast 2 year warranty n n n n n n n Special features n  Network Analysis – RTT, Link partner ability, IP Scan n  Auto measurement – with selection of tests n  LAN measurement – Distance, Wiremap, Crosstalk, Impedance and Continuity n  Coax capability – graphic or numeric TDR (selectable) n  Tone Generator – 1kHz analogue tone signal 0.2 m to 5000 m 0.2 m to 5000 m MFT with MFT with certification certification Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers Insulation testers Network qualification in one device Measures logical network performance Checks physical condition of cables Coax and RJ45 connections Autotest capability Tone Generator built in Li-ion battery Industrial insulation testers Loop testers RCD testers TDR500/3 TDR1000/3 TDR1000/3P Range Capability MFT MFT 1700 Series 0.2 m to 5000 m Minimum Pulse 2ns 2ns 2ns Blocking Filter Cursors YES YES YES PATs 1 2 2 Memory Trace Hold Trace Hold with Live Trace Overlay Trace Hold with Live Trace Overlay Sample Time Yes Yes Yes Auto Power Off Yes Certification software 60ns 60ns 60ns Backlight Yes Yes Test leads Miniature clip Miniature clip Standard clip 10 A fused CAT Rating 300V CAT III 150V CAT IV IP Rating 300V CAT III 150V CAT IV 300V CAT III 150V CAT IV Meter test box IP54 IP54 IP54 Voltage detector, Solar tester Accessories Clamp and multimeters Earth testers Services and leak detectors Cable fault locator Network performance tester For more information go to For more information go to bit.ly/Megger_ NET200 bit.ly/TDR1000-3 Prices 32 Cable fault locator Network performance tester 33
  • Price List Test leads available at www.megger.com/uk/shop Price List Price £ Test leads available at www.megger.com/uk/shop Price £ exclusive of VAT Page 4 and 5 MFT1710 MFT1720 MFT1730 Included 1001-878 6220-810 1001-991 2001-649 Multifunction tester Multifunction tester with 2-wire auto RCD and phase sequence indicator Multifunction tester with downloading, rechargeable cells and 3-wire earth testing enabled Accessories Spare probes and clips red, blue and green 3-wire earth electrode test set 3-wire 10 A fused lead set red, blue and green with prods and croc clips 100 A current clamp Charging lead for 12 V vehicle power outlets Instrument and document carry bag 1002-490 1001-810 1001-975 ICLAMP 6280-332 6420-143 Remote switched probe CAT IV 600 V (not MFT1710) Socket interface adaptor 3-wire lead set with prods and croc clips Hard carry case Page 12 MIT220 MIT230 Pocket-sized insulation and continuity tester 250 V and 500 V Pocket-sized insulation and continuity tester 250 V, 500 V and 1000 V 1,295.00 Included 1002-001 5410-419 2-wire lead set red and black with prods and croc clips Hard carry case 29.00 19.00 Accessories 1002-015 5410-346 2-wire 500 mA fused lead set red and black with prods and croc clips Protective rubber holster 49.00 19.00 49.00 29.00 49.00 29.00 20.00 45.00 55.00 239.00 12.00 39.00 Page 6 MFT1730 On-site Multifunction tester with downloading, rechargeable cells, 3-wire earth testing and certification software Included 1001-878 6220-810 1001-991 1001-810 2001-649 1000-632 Remote switched probe CAT IV 600 V Socket interface adaptor 3-wire lead set with prods and croc clips 3-wire earth electrode test set Hard carry case PowerSuite Professional Lite On-site 49.00 29.00 49.00 45.00 29.00 339.00 Accessories 1002-490 6420-143 1002-015 1001-975 ICLAMP 6280-332 Spare probes and clips red, blue and green Instrument and document carry bag 2-wire 500 mA fused lead set red and black with prods and croc clips 3-wire 10 A fused lead set red, blue and green with prods and croc clips 100 A current clamp Charging lead for 12 V vehicle power outlets 20.00 39.00 49.00 55.00 239.00 12.00 Page 7 MTK310 test kit MTK320 test kit MTK330 test kit Comprising MIT310, LTW315 and RCDT310 Comprising MIT320, LTW325 and RCDT320 Comprising MIT330, LTW335 and RCDT330 Included 1001-884 6220-740 6220-810 1001-976 1002-001 Remote switched probe (not MTK310) UK mains test lead set Socket interface adaptor 2-wire lead set red and green with prods and croc clips 2-wire lead set red and black with prods and croc clips Accessories 1002-015 1001-977 2-wire 500 mA fused lead set red and black with prods and croc clips 2-wire 10 A fused lead set red and green with prods and croc clips Page 8 PPK210 PPK220 Electrical test kit comprising of MIT310 and LRCD210 Electrical test kit comprising of MIT320 and LRCD220 Included 6220-740 1001-883 1002-001 5410-418 UK mains test lead set 3-wire lead set with prods and croc clips 2-wire lead set red and black with prods and croc clips Hard carry case 29.00 39.00 29.00 29.00 Accessories 1002-015 1001-977 6420-143 2-wire 500 mA fused lead set red and black with prods and croc clips 2-wire 10 A fused lead set red and green with prods and croc clips Instrument and document carry bag 49.00 50.00 39.00 Page 9 LRCD210 LRCD220 Combined non-trip loop and RCD tester Combined non-trip loop and 1000 mA RCD tester Included 6220-740 1001-883 5410-409 UK mains test lead set 3-wire lead set with prods and croc clips Hard carry case 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips Accessories exclusive of VAT 765.00 1,095.00 1,455. 00 265.00 339.00 Page 13 MIT400 MIT410 MIT415 MIT420 MIT430 MIT40X MIT480 MIT481 MIT485 CAT IV 600 V insulation and continuity tester 250 V, 500 V and 1000 V CAT IV 600 V insulation tester as MIT400 with 50 V 100 V, PI and DAR CAT IV 600 V insulation and continuity tester 10 V, 25 V, 2 50 V and 500 V CAT IV 600 V insulation tester as MIT310 with results storage and recall CAT IV 600 V insulation tester as MIT420 with Bluetooth® downloading CAT IV 600 V insulation tester voltage selectable from 10 V to 100 V Telecoms insulation and continuity tester 50 V and 100 V Telecoms insulation tester 50 V, 100 V, 250 V, 500 V and 1000 V results storage and recall Telecoms insulation tester as MIT481 with Bluetooth® downloading 339.00 399.00 399.00 449.00 519.00 439.00 429.00 Included 1002-001 1001-878 5410-420 2-wire silicone lead set red and black with prods and croc clips Remote switched probe CAT IV 600 V ( not MIT400 or MIT480) Hard carry case 29.00 49.00 19.00 Accessories 1002-015 6220-860 2-wire 500 mA fused lead set red and black with prods and croc clips Carry pouch 49.00 39.00 595.00 665.00 Page14 and 15 LTW315 LTW325 LTW335 LTW425 Non-trip 2-wire loop resistance tester 100 v to 280 V Non-trip 2-wire loop resistance tester 50 v to 480 V with frequency measurement Non-trip loop resistance tester as LTW325 with results storage and downloading High resolution non-trip loop resistance tester 50 V to 480 V Included 6220-810 1001-976 5410-409 Socket interface adaptor 2-wire lead set red and green with prods and croc clips Hard carry case 29.00 29.00 19.00 45.00 29.00 29.00 29.00 29.00 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00 Included LT300-EN-00 1001-976 5410-409 CAT IV 300 V high current loop tester with red and green 2-wire lead set 2-wire lead set red and green with prods and croc clips Hard carry case 369.00 29.00 19.00 49.00 50.00 Included LT300-EN-BS 6220-810 5410-409 CAT IV 300 V high current loop tester with UK mains test lead Socket interface adaptor Hard carry case 369.00 29.00 19.00 Included LT300-EN-FS 1001-977 5410-409 CAT IV 300 V high current loop tester with 10 A fused test lead set 2-wire 10 A fused lead set red and green with prods and croc clips Hard carry case 389.00 50.00 19.00 Page 16 and 17 RCDT310 RCDT320 RCDT330 RCD tester 100 V to 280 V RCD tester 50 V to 280 V with auto RCD test RCD tester as RCDT320 with result storage and downloading 359.00 409.00 449.00 1,259.00 1,415.00 1,555.00 899.00 1,019.00 Accessories 575.00 29.00 39.00 19.00 1001-977 2-wire 10 A fused lead set red and green with prods and croc clips 50.00 Page 18 PAT320 PAT350 Manual and automatic, dual voltage PAT tester Manual and automatic, dual voltage PAT tester with flash testing 859.00 1,019.00 50.00 Included 2000-870 2000-881 5310-401 2000-962 Continuity, earth bond and insulation test lead 230 V extension lead test adaptor Flash test lead (PAT350 only) Carry case with lead and document pouch 29.00 9.00 29.00 59.00 Accessories 1000-766 6220-639 1000-767 1000-770 2000-551 1000-971 1001-227 2001-044 PATR210 110 V mains supply adaptor 110 V extension lead test adaptor 415 V 4-pin adaptor lead 415 V 5-pin adaptor lead PC power supply lead test adaptor PASS labels, roll of 1000 FAIL labels, roll of 1000 Side mounted lead and document pouch for 2000-962 PAT test duplicate record book 29.00 19.00 49.00 49.00 9.00 55.00 55.00 49.00 19.00 Page 10 and 11 MIT300 MIT310 MIT310A MIT320 MIT330 Installers’ insulation and continuity tester 250 V and 500 V Installers’ insulation and continuity tester as MIT300 with 1000 V and 600 V voltmeter Insulation and continuity tester with analogue display Insulation and continuity tester as MIT310 with resistance measurement and backlight Insulation and continuity tester as MIT320 with data storage and downloading Included 1002-001 1001-884 5410-409 2-wire lead set red and black with prods and croc clips Remote switched probe ( MIT320 and MIT330 only) Hard carry case 29.00 45.00 19.00 1002-015 2-wire 500 mA fused lead set red and black with prods and croc clips 29.00 399.00 359.00 439.00 489.00 Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers Insulation testers Industrial insulation testers Loop testers RCD testers PATs Certification software Meter test box Voltage detector, Solar tester Accessories 29.00 19.00 49.00 Accessories 299.00 Electrical Electrical test kits test kits 625.00 615.00 UK mains test lead 2-wire lead set red and green with prods and croc clips (RCDT320 and RCDT330 only) Hard carry case Accessories MFT with MFT with certification certification 499.00 Included 6220-740 1001-976 5410-409 509.00 595.00 MFT MFT 1700 Series Clamp and multimeters Earth testers Services and leak detectors Cable fault locator Network performance tester Prices 34 PRICE LIST PRICE LIST 35
  • Price List Test leads available at www.megger.com/uk/shop Price List Price £ Test leads available at www.megger.com/uk/shop Price £ exclusive of VAT Page 19 PAT320 Business in a Box Manual and automatic, dual voltage PAT tester with report book, PAT testing and marketing guide Included 2000-870 2000-881 2000-551 1000-971 PATR210 2000-962 Accessories 1000-766 6220-639 1000-767 1000-770 1001-227 exclusive of VAT MFT with MFT with certification certification 949.00 Page 26 PSI410 SIA10 CAT IV 600 V phase rotation unit Socket interface adaptor or break-out lead Continuity, earth bond and insulation test lead 230 V extension lead test adaptor PC power supply lead test adaptor PASS labels, roll of 1000 PAT test duplicate record book Carry case with lead and document pouch 29.00 9.00 9.00 55.00 19.00 59.00 Page 27 MST210 DVD100 DVD200 PTDVD ETL30 ETL50 BS1363 socket tester Initial inspection and test for a domestic property (17th Edition) Initial inspection and test for industrial properties (17th Edition) PAT testing and inspection DVD 30 m extension test lead on spool 50 m extension test lead on spool 110 V mains supply adaptor 110 V extension lead test adaptor 415 V 4-pin adaptor lead 415 V 5-pin adaptor lead FAIL labels, roll of 1000 29.00 19.00 49.00 49.00 55.00 Page 28 and 29 AVO300 AVO310 AVO410 Included Accessories 1002-001 1002-015 Digital multimeter Digital multimeter with backlight CAT IV 600 V TRMS digital multimeter 2-wire lead set with probes 2-wire lead set red and black with prods and croc clips 2-wire 500 mA fused lead set red and black with prods and croc clips 89.00 99.00 145.00 Part P kits P Part Combined kits loop and RCD testers 29.00 49.00 Combined loop & RCD testers DCM310 DCM320 DCM330 DCM340 DCM300E Included Accessories 1002-001 1002-015 400 A a.c. clampmeter 400 A a.c., 600 V a.c. and d.c. 20 MΩ clamp multimeter CAT IV 600 V fork multimeter 600 A a.c. and d.c., 600 V a.c. and d.c. clamp multimeter Earth leakage clampmeter 2-wire lead set with probes (not DCM310) 2-wire lead set red and black with prods and croc clips (not DCM310) 2-wire 500 mA fused lead set red and black with prods and croc clips (not DCM310) 85.00 99.00 105.00 145.00 375.00 Page 30 Include Accessories DET3TD DET3TC 1001-810 5410-409 ICLAMP 6220-803 3-wire earth tester with bond testing capability 3-wire earth tester enabled for attached rod technique, ART 3-wire earth electrode test set Hard carry case Clamp for use with DET3TC for attached rod technique, ART Right angled adaptors 4 off 465.00 515.00 45.00 19.00 239.00 29.00 DET14C DET24C Earth resistance clamp-on meter Earth resistance clamp-on meter with downloading 919.00 1,015.00 Page 31 EasyLoc set EasyLoc Standard EasyLoc Basic Easyloc Tx transmitter set Easyloc Standard receiver, Easyloc Tx transmitter, earthing kit, earthing spike, carry bag Utilities detection and location system with depth measurement Utilities detection and location system Easyloc Tx transmitter, earthing kit, earthing spike 1,577.00 859.00 774.00 718.00 Headphones 100 mm transmitter clamp House connection set For using the EasyLoc in noisy environment To transmit a signal onto powered cables Comprising connection leads for direct connection for power supply, cable TV and telephone lines HL5 Included Accessories PAM U-D S42 S20 Mini leak detector kit with FM transmitter 863 MHz Wireless headphone with FM receiver 1 extension rod and magnet Tripod Valve adaptor Valve adaptor 425.00 Page 32 Included Accessories TDR500/3 TDR1000/3 6231-652 5410-420 1002-015 Basic time domain reflectometer Time domain reflectometer Miniature clip test lead set Hard carry case 2-wire 500 mA fused lead set red and black with prods and croc clips 495.00 795.00 29.00 19.00 49.00 Included Accessories TDR1000/3P 1002-015 5410-420 6231-652 Time domain reflectometer 2-wire 500 mA fused lead set red and black with prods and croc clips Hard carry case Miniature clip test lead set 815.00 49.00 19.00 29.00 Page 33 Included Accessories NET200 2003-184 2003-181 2003-183 2003-200 2003-189 2003-187 2003-180 2003-193 2003-194 2003-195 2003-196 2003-197 2003-198 2003-199 Network qualification tester kit a.c.-d.c. Power adapter BNC to F-connector RS232 to USB adapter cable d.c. Car charge lead Portable bag Power cords (US, EU, UK) Remote identifier #1 Remote identifier #2 Remote identifier #3 Remote identifier #4 Remote identifier #5 Remote identifier #6 Remote identifier #7 Remote identifier #8 PAT420 Business in a Box Downloading PAT tester with PowerSuite Professional Contractor PAT software, PAT testing and marketing guide Included 2000-870 2000-881 2000-551 1000-971 2000-962 Continuity, earth bond and insulation test lead 230 V extension lead test adaptor PC power supply lead test adaptor PowerSuite Professional Contractor PAT software PASS labels, roll of 1000 Carry case with lead and document pouch Accessories 1000-766 6220-639 1000-767 1000-770 1001-227 PATR210 1001-047 1001-046 110 V mains supply adaptor 110 V extension lead test adaptor 415 V 4-pin adaptor lead 415 V 5-pin adaptor lead FAIL labels, roll of 1000 PAT test duplicate record book Opticon OPR3201 bar code scanner Brother PT-2430 USB pass/fail barcode label printer Page 20 and 21 PAT410 PAT420 PAT450 Downloading PAT tester with 200 mA bond test only Downloading PAT tester with 25 A, 10 A and 200 mA bond tests Downloading PAT tester with 25 A, 10 A and 200 mA bond and flash testing Included 2000-870 2000-881 2000-551 5310-401 2000-962 Continuity, earth bond and insulation test lead 230 V extension lead test adaptor PC power supply lead test adaptor Flash test lead (PAT350 only) Carry case with lead and document pouch Accessories 1000-633 1000-971 1001-227 1000-766 6220-639 1000-767 1000-770 PATR210 1001-047 1001-046 PowerSuite Professional Contractor software PASS labels, roll of 1000 FAIL labels, roll of 1000 110 V mains supply adaptor 110 V extension lead test adaptor 415 V 4-pin adaptor lead 415 V 5-pin adaptor lead PAT test duplicate record book Opticon OPR3201 bar code scanner Brother PT-2430 USB pass/fail barcode label printer 495.00 55.00 55.00 29.00 19.00 49.00 49.00 19.00 265.00 195.00 Page 22 PowerSuite Professional Lite PowerSuite Professional Lite On-site PowerSuite Professional Contractor PowerSuite Professional Contractor On-site PowerSuite Professional Power PowerSuite Professional SME PowerSuite Professional Ultra mobile Basic certification software for 17th Edition and PAT testing PowerSuite Lite with form filling for mobile devices Certification software for 17th Edition and PAT testing with client management database, billing and 3rd party tester downloading 245.00 339.00 PowerSuite Contractor with form filling for mobile devices PowerSuite Contractor with additional features such as document design and maintenance certificates PowerSuite network solution Form filling for additional mobile devices. Must be used with another PowerSuite Professional product 615.00 Page 23 MTB7671/2 Meter test box Included 2002-524 Test record card and label set Page 24 PVM210 PVK320 PVK330 Irradiance meter Photovoltaic kit with PVM210 irradiance meter and DCM340 multimeter Photovoltaic kit with PVM210 irradiance meter and AVO410 clamp multimeter Page 25 VF1 VF2 TPT210 TPT220 MPU690 Non-contact a.c. voltage detector Non-contact a.c. voltage detector with buzzer Two-pole voltage detector with LED array Two-pole voltage detector with LCD display Proving unit for two-pole testers 1,489.00 29.00 9.00 9.00 55.00 59.00 29.00 19.00 49.00 49.00 55.00 19.00 265.00 195.00 1,125.00 1,269.00 1,369.00 29.00 9.00 9.00 29.00 59.00 495.00 855.00 1105.00 125.00 429.00 15.00 135.00 245.00 245.00 15.50 17.00 52.00 84.00 99.00 130.00 29.00 MFT MFT 1700 Series 15.00 30.00 30.00 30.00 75.00 85.00 29.00 Electrical Electrical test kits test kits Insulation testers Industrial insulation testers 49.00 32.00 258.00 124.00 8.00 8.00 45.00 32.00 1250.00 24.00 6.00 10.00 6.00 24.00 2.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Loop testers RCD testers PATs Certification software Meter test box Voltage detector, Solar tester Accessories Clamp and multimeters Earth testers Services and leak detectors Cable fault locator Network performance tester Prices 36 PRICE LIST PRICE LIST 37
  • Other Megger products you may find useful MIT510 5 kV insulation resistance tester TTR25 Hand-held single and three-phase transformer tester n Tests  insulation resistance up to 5 TΩ. MIT510/2 is easy to operate and very tough. It can perform automatic IR tests. The built-in timer and high test ranges allow simple and quick evaluation of the condition of the insulation under test. Now upgraded to CATIV 600 V, giving you even better operator safety. n Measures  turns ratio, excitation current and polarity of windings in single- and threephase distribution and power transformers (tested phase by phase), potential and current transformers, and tapped transformers. User can operate the test set one handed. Eliminates the need to bend down to operate the instrument and speeds up testing time. It is rugged, with a high impact, shock resistant case, yet very light at 870 g. MFT MFT 1700 Series About Megger MFT with MFT with certification certification Made in UK All the 17th Edition and PAT products shown in this catalogue are engineered and made at our factory in Dover. If you’ve ever caught a ferry to France, you’ve probably seen our building – there’s a big Megger logo on our car park, next to the roundabout as you enter Dover. Everyone hears about the decline in British manufacturing, but Megger employs hundreds of people at this site. As a professional electrician, you have a right to demand the very best electrical test equipment. By specifying Megger, not only will you get the best, but you’ll also be supporting a great British success story. Electrical Electrical test kits test kits Part P kits P Part Combined kits loop and RCD testers Combined loop & RCD testers Insulation testers EZ-Thump cable fault locator PA9+ Power quality analyser DLRO10x and DLRO200 and DLRO600 digital low resistance ohmmeter n A  practical and efficient solution for the fast on spot fault location. The EZ-Thump is the compact and light weight, battery or mains powered solution for the fault location in MV or LV cables. It is the perfect solution for areas of lower distribution density and failure rate. Calibration and repair service Megger offers a full Repair and Calibration accredited to ISO9001:2008. Our trained repair technicians use only production spare parts and the latest test equipment to ensure that we give customers the highest standard of service for any instrument. n On-site  power quality analysis and data retrieval without a computer. Intelligent download and real time graphical trending of Harmonics, THD and TDD. It now has a faster digital signal processor (DSP), 12 MB of internal, non-volatile memory, and incorporated auxiliary power input capabilities. Includes Metrosoft® software and remote communications. For information on having your instrument calibrated or repaired and to obtain a Returns Authorisation number please call 01304 502101. n Tests  for earths and bonding in telecommunications towers, rail, aircraft, anything bimetal, switchgear (including lv switchgear), breakers, etc. Automatically detects continuity in potential and current connections. Gives accurate results in under three seconds, with auto current reversal. Fuse protected to 600 V. NiMH battery reduces weight. Fully automatic. Select the most suitable test current, up to 10 A dc to measure resistance from 0.1 µΩ to 2000 Ω on one of seven ranges. Certified to ISO 9001:2008 and ISO14001:2004 Engineered for electrical contractors Programma Torkel 840 battery load unit FRAX101 Sweep frequency response analyser SMRT protective relay test set n  Batteries are becoming an increasingly important part of modern life with their use in standby power and maintained supply units. Megger has added to its BITE range of battery impedance testers with the Programma Torkel range of battery load units which allow the batteries to be tested in service, by adjusting to include the load current in the test parameters. n Following  an incident the quickest way to assess the condition of a transformer, before returning it to service, is to run a FRA test. The FRAX101 is the smallest, most rugged instrument and it offers the highest dynamic range and accuracy. n SMRT  tester and AVTS® software from Megger raises the standard and lowers the weight for the automatic testing and management of protective relay systems. SMRT offers traditional manual and semi-automatic testing of the relay system whilst the AVTS package offers fully automatic testing as well as relay maintenance schedule management. Many of our engineers sit on UK and international technical committees, and we have regular meetings with all the big trade associations in England and Scotland. We also have close contacts with training organisations, scheme providers for self-certification schemes for installers, and government organisations. If anyone knows how important it is to understand the needs of electrical contractors in the UK, it’s Megger. So when new legislation or rules are introduced – whether it’s Part P of the Building Regulations, RoHS, the WEEE Directive or BS 7671, you can count on Megger to put your interests first. Established originally in the late 1800s, the company has been manufacturing test and measurement instruments designed to perform preventive maintenance and troubleshooting for decades. Megger products help customers all over the world improve their efficiency, reduce costs, and meet standards. It operates globally with dedicated field sales teams and distributors located all over the world and manufacturing plants in the United States, Sweden and the United Kingdom. The commitment of Megger to industry is reflected in its technical leadership and in being the first to design and introduce many key products. Technical specifications are subject to change without notice. 38 OTHER MEGGER PRODUCTS Megger’s manufacturing plant in Dover is certified to the full operational requirements of ISO 9001:2008 and the manufacturing process strictly adheres to the highest standards for quality, reliability and safety. It is also certified to ISO14001:2004, the standard for environmental management systems. Industrial insulation testers Loop testers RCD testers PATs Certification software Meter test box Voltage detector, Solar tester Accessories Clamp and multimeters Earth testers Services and leak detectors Cable fault locator Network performance tester Tel: +44 (0)191 490 1547 Prices Fax: +44 (0)191 477 5371 Email: northernsales@thorneandderrick.co.uk ABOUT MEGGER 39 Website: www.cablejoints.co.uk www.thorneanderrick.co.uk