UreKem Custom Paints
Product Guide
January 2014
Presentation Overview
•
•
•
•
•
•
•
•
•

Surface Cleaners
Primers
Basecoats
Candy Systems
Chameleon Systems
Single Stage
L...
Surface Cleaners
SBWG Wax and Grease Remover
• Blend of polar and nonpolar solvents for
broader solubility of
contaminants
• Fast evaporati...
WBWG Water-Borne Surface Cleaner
• Special Blend of
surfactants, co-solvents
and water
• Excellent cleaning
power
• Compli...
Primers
EP-21 OxyStik Epoxy Primer
• 1:1 Mix Ratio by volume
• May be reduced up to
10% with UR Series
Reducer
• Best Choice for B...
UP-61 HS Urethane Primer Surfacer
• Mix 4 parts primer to 1
part UA Series to 1 part
reducer – 4:1:1
• Apply 2-4 coats to ...
US 80 Series Polyurethane Primer
Sealer
• Mixes 4:1:1 with
activator and reducer
• 15 Colors Available
• Provides a fresh
...
QF-777 Adhesion Promoter
• Ready to Spray
• Mist on to bare
automotive plastics for
adhesion
• Also works as flex agent
• ...
QFP-44 2K Plastic Primer
• Mixes 4:1 with UA
Series activator
• Provides adhesion to
most automotive
plastics
• Flexible
•...
Basecoat Colors
KemBase Basecoat
• Versatility – Can be
mixed 2:1 up to 1:1
• 2:1 for best coverage
• 1:1 for thinner
application preferen...
SGC Solid Color Basecoat
• Vivid solid color
basecoats
• 100 Series
• Mixed custom and
classic muscle colors
• Fast Covera...
KemBase MGC Series
• Metallic Series
• 200 Series - Coarse
Metallic Colors
• 300 Series – Fine and
Hybrid metallic colors
...
KemBase PGC Series
• Pearl Colored Shades
• 400 Series – Two Stage
Pearl Colors
– Prime or seal vehicle all to
one color b...
Chameleon Colors
Chameleon Colors
• Basecoat chemistry +
special color changing
pearls
• 10 colors available
• Optimized liquids
• No addin...
Ultra-Flair Hyper Holo Shifter
• Based on Spectraflair
technology
• Brilliant rainbow color
changing effects at
pearlescen...
Candy Paints
EKU Series 2K Urethane Candy
• Mix ratio 4:1:1
• Highly transparent
colored finishes
• Midcoat of a 3 stage
finish
• Deepe...
EKB – Candy Basecoats
• Basecoat chemistry
• Highly transparent
• Same 15 colors are
urethane
• Fast Dry
• Reduced tape li...
KGC – Candy Graphic Color
• Basecoat Chemistry
• Same 15 transparent
pigments as urethane
• Select pearl added
provides sh...
EKK – Candy Concentrates
• Concentrated form of
transparent
pigments/dyes
• Same 15 shades
• Great for customizing
basecoa...
Single Stage
UTC Series – UreTop 2K Polyurethane
• Mixes 4:1:1 with
activator and reducer
• Durable high gloss finish
• Over 150 shades...
KPU Series – Low Gloss Hot Rod Colors
• 4:1:1 Mix Ratio
• Strong 2K urethane resin
system
• No Clear Required
• Special pi...
Clearcoats
IC-100 Intercoat Clear
• Mix 2:1 up to 1:1 with
reducer
• Essentially a clear form
of basecoat
• Often used to apply
pearl...
IC-101 Pearl & Flake Carrier
• Mix 2:1 up to 1:1 with
UR Series Reducer
• Contains stabilizing
additives for pearls and
fl...
UC-410 2K MS Polyurethane Clear
•
•
•
•
•

Mix 4:1 with activator
No Reduction required
Low Color
Medium Solids
Apply 3-4 ...
UC-210 2K HS Glamour Clear
• Mixes 2:1 with UA
Activator
• Higher solids, longer
flow window than UC410
• Excellent for ov...
Additives
UA Series Universal Urethane Activator
• Highly weatherable
isocyanate solutions
• Used in all our 2K
urethane products
• ...
UR Series Universal Reducers
• Low water content and strong
solvent blend
• Will thin all our solvent
products
• Optimized...
AFE-52 Fisheye Eliminator
• Improves surface
wetting which can help
reduce fisheyes and
craters
• Not required
• Nice tool...
AUC-56 Cure Accelerator
• Urethane cure
accelerator
• Speeds reaction of
activator with paint or
clear
• Best used in cool...
ABS-10 Blending Solvent
• Special reducer and
additive blend to help
fade out spot repairs
• Used with small amount
of top...
ARE-66 Flow Enhancer and Retarder
• Special blend of very
slow evaporating
solvent and diluent
• Only recommended in
small...
AFP-01 Flatting Paste
• Can be used to adjust
gloss on our solvent
topcoats
• Mix up to 25% in after
activation of 2K
prod...
Pearls & Flakes
ClassicFx Mica Based Pearl Powders
• Conventional mica pearl
technology
• Sold in dry form
– Add to intercoat clear or
1st...
Screamin’ Xirallic Pearl
• Xirallic pearl technology
• Higher sparkle than
typical mica pearls
• Cleaner, more
chromatic c...
PrismFx “Ice” Type Glass Pearl
• Pearl effects built on
borosilicate glass flakes
• Large sparkle with good
transparency
•...
FireFlake Kandy Metal Flake
• Candy coated
metallized film
• Can be mixed with
solvent based clears
and colors
• Brilliant...
For more information or to learn
were you can purchase these
products visit:
www.urekem-paints.com
Upcoming SlideShare
Loading in...5
×

UreKem Custom Paint Products

41,017

Published on

UreKem Automotive Paints has a comprehensive line of custom paints for professional automotive use. This presentation explains the product line.

Published in: Automotive, Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
41,017
On Slideshare
0
From Embeds
0
Number of Embeds
11
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "UreKem Custom Paint Products"

  1. 1. UreKem Custom Paints Product Guide January 2014
  2. 2. Presentation Overview • • • • • • • • • Surface Cleaners Primers Basecoats Candy Systems Chameleon Systems Single Stage Low Gloss Hot Rod Color Clearcoats Additives
  3. 3. Surface Cleaners
  4. 4. SBWG Wax and Grease Remover • Blend of polar and nonpolar solvents for broader solubility of contaminants • Fast evaporation • No residue from solvents • “wipe on, wipe off” • Quarts only online
  5. 5. WBWG Water-Borne Surface Cleaner • Special Blend of surfactants, co-solvents and water • Excellent cleaning power • Compliant in low VOC markets • Best post sand cleaner
  6. 6. Primers
  7. 7. EP-21 OxyStik Epoxy Primer • 1:1 Mix Ratio by volume • May be reduced up to 10% with UR Series Reducer • Best Choice for Bare Metal and Fiberglass • Designed for adhesion and corrosion • Does not fill or sand well (typical epoxy)
  8. 8. UP-61 HS Urethane Primer Surfacer • Mix 4 parts primer to 1 part UA Series to 1 part reducer – 4:1:1 • Apply 2-4 coats to fill as needed • Made for filling and sanding • Medium Grey
  9. 9. US 80 Series Polyurethane Primer Sealer • Mixes 4:1:1 with activator and reducer • 15 Colors Available • Provides a fresh foundation in chromatic colors or greys • Not recommended for filling or sanding
  10. 10. QF-777 Adhesion Promoter • Ready to Spray • Mist on to bare automotive plastics for adhesion • Also works as flex agent • For flexible parts add up to 20% QF-777 to all layers except clear • Amber colored clear
  11. 11. QFP-44 2K Plastic Primer • Mixes 4:1 with UA Series activator • Provides adhesion to most automotive plastics • Flexible • Seals layers beneath
  12. 12. Basecoat Colors
  13. 13. KemBase Basecoat • Versatility – Can be mixed 2:1 up to 1:1 • 2:1 for best coverage • 1:1 for thinner application preference • Wide Range of colors • Two Stage and 3 Stage Colors • Custom Effects
  14. 14. SGC Solid Color Basecoat • Vivid solid color basecoats • 100 Series • Mixed custom and classic muscle colors • Fast Coverage with Opaque colors • Highly Durable • More than 40 Colors
  15. 15. KemBase MGC Series • Metallic Series • 200 Series - Coarse Metallic Colors • 300 Series – Fine and Hybrid metallic colors • Over 50 Custom Metallic Shades Available
  16. 16. KemBase PGC Series • Pearl Colored Shades • 400 Series – Two Stage Pearl Colors – Prime or seal vehicle all to one color before shooting base • 500 Series – 3 Stage Colors – requires base and midcoat to achieve color • Over 75 Stunning Pearl Effect Colors
  17. 17. Chameleon Colors
  18. 18. Chameleon Colors • Basecoat chemistry + special color changing pearls • 10 colors available • Optimized liquids • No adding messy & clumpy powders • Requires 80% Overlap & “walking the sides”
  19. 19. Ultra-Flair Hyper Holo Shifter • Based on Spectraflair technology • Brilliant rainbow color changing effects at pearlescent particle size • Full Strength and “Lite” versions available • Can be used over any colored base for a cool effect.
  20. 20. Candy Paints
  21. 21. EKU Series 2K Urethane Candy • Mix ratio 4:1:1 • Highly transparent colored finishes • Midcoat of a 3 stage finish • Deepest, wettest look of the candy types • 15 of the hottest colors to choose from • Candy paints will fade faster than our other basecoat lines
  22. 22. EKB – Candy Basecoats • Basecoat chemistry • Highly transparent • Same 15 colors are urethane • Fast Dry • Reduced tape lines • Best for graphics when you want the look of the urethane candy w/o the build and slower dry
  23. 23. KGC – Candy Graphic Color • Basecoat Chemistry • Same 15 transparent pigments as urethane • Select pearl added provides shimmer and some coverage • Can be used over nonmetallic undercoats and still get a candy like effect • Easiest of candy finishes to apply
  24. 24. EKK – Candy Concentrates • Concentrated form of transparent pigments/dyes • Same 15 shades • Great for customizing basecoat colors or tinting candy • Use pre-mixed EKU, EKB, or KGC color for best fade resistance
  25. 25. Single Stage
  26. 26. UTC Series – UreTop 2K Polyurethane • Mixes 4:1:1 with activator and reducer • Durable high gloss finish • Over 150 shades available • Great choice for economy jobs • Quarts and gallons available
  27. 27. KPU Series – Low Gloss Hot Rod Colors • 4:1:1 Mix Ratio • Strong 2K urethane resin system • No Clear Required • Special pigments and flatteners to lower gloss • Consistent Gloss sheen • 75+ Colors Available – All Solids – Most Metallics and 2 stage pearl colors
  28. 28. Clearcoats
  29. 29. IC-100 Intercoat Clear • Mix 2:1 up to 1:1 with reducer • Essentially a clear form of basecoat • Often used to apply pearl and flake powders – Best choice for pearls and flakes over dark colors • Great for blending and fade outs of base
  30. 30. IC-101 Pearl & Flake Carrier • Mix 2:1 up to 1:1 with UR Series Reducer • Contains stabilizing additives for pearls and flakes • Best choice for applying dry pearls and flakes over most colors • Use IC-100 over dark colors
  31. 31. UC-410 2K MS Polyurethane Clear • • • • • Mix 4:1 with activator No Reduction required Low Color Medium Solids Apply 3-4 coats for best protection • Durable, glossy finish • Easiest to spray • Gallons and Quarts
  32. 32. UC-210 2K HS Glamour Clear • Mixes 2:1 with UA Activator • Higher solids, longer flow window than UC410 • Excellent for overalls even in hot conditions • Preferred by experienced professionals
  33. 33. Additives
  34. 34. UA Series Universal Urethane Activator • Highly weatherable isocyanate solutions • Used in all our 2K urethane products • 3 Speeds for changing conditions • Packed with inert gas for better stability • Quarts and Half Pints – Only the standard available in Half Pints
  35. 35. UR Series Universal Reducers • Low water content and strong solvent blend • Will thin all our solvent products • Optimized range of evaporation rates for best balance of flow, sag resistance, and dry time • Stronger cutting power than most reducers • Gallons, Quarts and Half Pints – Only Standard is available in half pints – Fast only available in Quarts
  36. 36. AFE-52 Fisheye Eliminator • Improves surface wetting which can help reduce fisheyes and craters • Not required • Nice tool to keep in the shop but only use as needed • Half Pints Only
  37. 37. AUC-56 Cure Accelerator • Urethane cure accelerator • Speeds reaction of activator with paint or clear • Best used in cooler weather • Reduces pot life
  38. 38. ABS-10 Blending Solvent • Special reducer and additive blend to help fade out spot repairs • Used with small amount of topcoat for seamless blending
  39. 39. ARE-66 Flow Enhancer and Retarder • Special blend of very slow evaporating solvent and diluent • Only recommended in small amounts for application in extreme heat • Helps increase “flow” time • Quarts Only
  40. 40. AFP-01 Flatting Paste • Can be used to adjust gloss on our solvent topcoats • Mix up to 25% in after activation of 2K products • Pints Only
  41. 41. Pearls & Flakes
  42. 42. ClassicFx Mica Based Pearl Powders • Conventional mica pearl technology • Sold in dry form – Add to intercoat clear or 1st coat of 2K clear – 1 oz or 2 oz sizes standard • Also used for customizing base color
  43. 43. Screamin’ Xirallic Pearl • Xirallic pearl technology • Higher sparkle than typical mica pearls • Cleaner, more chromatic colors • 1 oz or 2 ounce bottles • Mix with intercoat, topcoat clear or many colors
  44. 44. PrismFx “Ice” Type Glass Pearl • Pearl effects built on borosilicate glass flakes • Large sparkle with good transparency • Beautiful colors with a high degree of brilliance at relatively low dosing • 1 oz and 2 oz sizes • Requires extra coats of clear to bury profile
  45. 45. FireFlake Kandy Metal Flake • Candy coated metallized film • Can be mixed with solvent based clears and colors • Brilliant sparkle • Two sizes to choose from – 6 mil & 15 mil hex • 12 shades
  46. 46. For more information or to learn were you can purchase these products visit: www.urekem-paints.com

×