NAME OF PROJECT : PROPOSED OFFICE BUILDING FOR JINDAL SAW LIMITED VILLAGE -SULTANPUR , TALUKA - SANDUR , DISTRICT - BELLARY , STATE KARNATAKA CIVIL WORKSSR DISCRIPTION OF ITEM UNIT QTYNO1(a) Earth work in excavation over entire area upto 50 cm (black cotton soil) including disposal of excavated earth and disposed earth to be levelled and neatly dressed. CU.M 339.291(b) Earth work in excavation over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m disposed earth to be levelled and neatly dressed. All kinds of soil CU.M 454.00 Extra for every additional lift of 1.5m or part thereof in: All kinds of soil 2 Surface dressing of ground including removing vegetation and in- equalities , disposal of rubbish, lead upto 500mts, including dressing etc. complete All kinds of soil SQ.M. 720.00 3 Filling available excavated earth (excluding rock) in trenches, plinth, CU.M. 211.65 sides of foundations etc in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m4(a) Filling with murrum in entire area over excavated earth in layers not CU.M. 339.29 exceeding 20cm in depth: consolidating each deposited layer by ramming and watering complete4(b) Filling with murrum/quarry dust brought fromoutside in trenches, CU.M. 179.88 plinth, sides of foundations etc in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering complete 5 Supplying and filling in plinth with available sand under floors CU.M. 92.36 Including, watering, ramming consolidating and dressing complete 6 Providing Anti Termite Treatment / Pest Contol for pre and post SQ.M. 686.40 construction structure with approved quality of chemical as per specfication including labour & materials consiztent etc. complete. 7 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level. 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm CU.M. 107.85 nominal size)
8 Applying a coat of residual petroleum bitumen of penetration 80/100 of SQ.M. 66.80 approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.9 Random rubble masonry with black stone below plinth and including levelling up plinth with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at plinth level with: Cement mortar 1:6 (1 cement : 6 coarse sand) CU.M. 90.8910 Blocks work with designation 150 in superstructure abve plinth level up to 2nd floor level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) CU.M. 379.7811 Blocks work with designation 100 in superstructure abve plinth level up to floor level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) SQ.M. 64.3512 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement- all work upto plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm CU.M. 100.69 nominal size)13 Reinforced cement concrete in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor level excluding cost of centring, shuttering, proping etc and removal of form work 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm CU.M. 323.01 nominal size)14 Centering and shuttering including strutting, propping etc. and removal of form for :- Foundations, footings, bases of columns,plinth beams, lintel SQ.M. 2840.00 chhajjas,staircase slab etc, for mass concrete.15 Reinforcement for R.C.C work including straightening, cutting, bending, placing in position & binding all complete. Thermo-Mechanically Treated bars TON 41.1716 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measued. ) Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :- Second class Teak wood SQ.M 10.71 Providing and fixing ISI marked flush door shutters conforming to IS : SQ.M 52.08 2202 ( Part-I) decorative type, core of block board construction with frame of 1 st class hard wood and well attched teak 3 ply veneering with vertical grains or cross bands and facse veneers on both faces of shutters.
17(a) Providing and fixing M.S. grills of required pattern in frames of KG 1900.00 windows etc. with M.S. flats square or round bars ,etc. all complete17(a) painting two coats(excluding priming coat) on M.S.grill surfaces with SQ.M 95.00 SYNTHETIC ENAMEL PAINT of appproved shade. 18 Providing 40 x 5mm flat iron hold fast 40cm long including fixing to EACH 150.00 frame with 10 mm diameter bolts, nuts and wooden plugs and embedings in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) 19 Providing and fixing special quality bright finished brass cupboard and ward robe locks with four levers including necessary screws etc. complete (best make of approved quality) 75 mm locks EACH 63.00 cupboards NOS 38.00 20 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary nuts and screws etc. complete. 300 x 16 mm EACH 48.00 21 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 250 x 10 mm EACH 48.00 150 x 10 mm EACH 24.00 22 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete. 125 mm EACH 96.00 23 Providing and fixing aluminium hanging floor stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete. Single rubber stopper EACH 50.00 24 Providing aand fixing M.S. fan clamp type-I or II of 16 mm dia M S bar EACH 45.00 bent to shape with hooked ends in RCC slabs during laying including painting the exposed portionof loop, all as per standard design complete. 25 Kota stone slabs exposed face dressed and rubbed, on staircase steps. 25 mm thick SQ.M. 636.10
26 Providing and fixing 1st quality ceramic glazed tiles conforming to IS SQ.M. 117.80 15622 ( thickness to be specified by the manufacture ) of approved make in all colours, shades except begundy, bottle green, black of any size as approved by Engineer in charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 27 Providing and laying polished vitrified floor tiles in different sizes, of somany or kjaria tiles ( thickness to be specified by the manufactures with water absorptions less than 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1 : 4 ( 1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc, complete. Size of tile 60 x 60 cm SQ.M. 882.7628(a) 18 mm cement plaster in two coats under layer 12mm thick cement SQ.M. 2361.99 plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) finished with rough sponge28(b) 6mm cement plaster to ceiling of mix: 1:3 (1 cement : 3 fine sand) SQ.M. 635.8228( c) 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand) SQ.M 1255.17 29 White washing to give an even shade: New work (three or more coats) SQ.M. 635.82 30 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with SQ.M. 1255.17 cement primer. 31 Finishing walls with water profing cement paint "Snowem- Plus" of M/s Snowcem India Ltd or equivalent of required shade: New work (two or more coats applied @ 3.84 Kg/ 10 Sqm) SQ.M. 3542.99 32 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware / Hindware/ Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. W.C. pan with ISI marked white solid plastic seat and lid EACH 6.00 33 Providing and fixing white vitreous china flat back or wall corner type EACH 9.00 lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively
34 Providing and fixing wash basin with C.I./ M.S. brackets 15 mm C.P. brass pillar taps, Kingston / Gem / Techno / Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require White Vitreous China Flat back wash basin size 550 x 400 mm with EACH 7.00 single 15 mm C.P. brass pillar tap35 Providing and fixing ISI marked 600 x 450mm bevelled edge mirror of EACH 6.00 superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.36 Providing & fixing SWR PVC (I.S.I - IS 13592) waste or vent pipe including necessary specials such as tees,bends,clamps,Ys plinth offsets,shoes,Vent cowl etc.with bracket,screws on wooden plugs fixed on wall face including filling joints with solution & cement mortar 1:2 completed as directed. 100mm dia MTR 65.00 75mm dia MTR 65.0037 Providing and fixing plain bend of required degree 100mm dia EACH 25.00 Sand cast iron S&S as per IS - 1729 75 mm EACH 15.0038 Providing and fixing trap of self cleaning design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet & 75mm outlet Sand cast iron S&S as per IS- 1729 EACH 6.0039 Providing and fixing ISI marked G.I.pipes confirming IS-1239-part- MTR I[surya G.I pipe or other equivqlent having ISI license -of medium grade] complete with G.I. Fittings and clamps, including cutting and making good the walls etc. 25 mm 123.50 40 mm 35.50 20 mm 46.3040 Providing and fixing ISI marked Concealed G.I.pipes confirming IS- 1239-part-I[surya G.I pipe or other equivqlent having ISI license -of medium grade] complete with G.I. Fittings and clamps, including cutting and making good the walls etc. 15 mm dia. nominal bore MTR 50.00 20 mm dia. nominal bore MTR 40.00 External work 25 mm dia. nominal bore MTR 30.0041 Providing and fixing ISI marked brass bib cock of Jaquar compny. 15 mm dia. nominal bore EACH 14.00
42 Providing and fixing ISI marked brass stop cock of Jaquar compny. 15 mm dia. nominal bore EACH 14.0043 Providing and fixing ISI marked gun metal gate valve with C.I. Whell of approved quality (screwed end) 25 mm dia. nominal bore EACH 4.0044 Providing and fixing ISI marked ball valve (brass) of approved quality, High of low pressure, with plastic floats complete. 25 mm dia. nominal bore EACH 4.0045 Providing and placing on terrace (at all floor levels) polyethylene water Per litre 5000.00 storage tank ISI: 12701 marked indicating the BIS License No. with capacity cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. [Sintex, Electroplast, Star, Lotus or equivalent having valid ISI license].46 Providing laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand) including excavation,refilling,laying in proper slope, testing of joints etc, complete. 100 mm diameter MTR 50.00 150 mm diameter MTR 45.0047 providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all - round S.W.pipes including bed concrete as per standard design. 100 mm diameter S.W.pipe MTR 50.00 150 mm diameter S.W.pipe MTR 45.0048 Construction of inspection chambers 60x60x80 cm(all inner dimentions)with walls of C.C solid blocks laid in C:M 1:6 over a bed of 15 cm thick C.C 1:5:10, making bed channels in C.C of 1:3:6 mix and 7cm thick pre-cast R.C.C 1:2:4 slab covering 72x72cm size,within 14cm wide and 7cm thick C.C 1:3:6 coping cover the block masonry ,plastered inside and exposed faces,in CUM 1:3 ,10mm thick providing M.S reinforcement and a pair of lifting handles of 12mm dia M.S bar,including earth excavation and refilling etc.complete as directed.Walls 200mm thick of machine made C.C blocks EACH 4.0049 Providing and fixing glazed earthen ware gully trap 100mm dia ,including C.I cover 250x250mm & making necessary chamber 300x300 mm size with 10cm C.C solid blocks etc.complete as directed 150 X 100 mm size P type EACH 6.0050 providing and fixing ISI marked C.I Nahani trap 100 mm dia.with EACH 24.00 necessary fittings,making good the walls & floor etc. complete as directed.
51 Providing and fixing glazed aluminium window, ventilator shutters and partitions etc. with PVC /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (cost of aluminium snap beading shall be paid in basic item) With glass panels of 5.50 mm thickness SQ.M. 88.02 52 Laying cement concrete using broken bricks/brick bats 25mm to 100 mm size with 50% of cement mortar 1:5 ( 1 cement : 5 coarse sand) admixed with proprietary water proofing compound conforming to IS 2645 over 20mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with proprietary water proofing compound conforming to IS: 2645 to required slope and treating similarly the adjoining walls upto 300mm height including rounding of junctions of walls and slabs. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curring and for final test. All above operations to be done in order and as directed and specified by the engineer-in-charge. With average thickness of 120 mm and minimum thickness at khurra as SQ.M. 686.00 65 mm. 53 Providing and fixing Steel pipes in elevation of required pattern in Partition walls etc. 50mm dia pipe KG 386.0054(a) providing and fixing light/fan/tube point with PVC insulated single core standard copper conductor wire of 1.50 sq.mm of 1KV grade with continuous earth wire or 14 SWG bare copper conductor laid through 248.00 PVC conduit pipe of 1.00mm thickness POINTS54(b) Providing and fixing 3 pin 15/5 Amp 230 V plug point POINTS 41.00 total TOTAL = Internal electrical installation @ % = Add Contigencies @ % =