ED3 skid weigh series d


Published on

Forklift onboard weighing scales with vehicle impact detection

  • Be the first to comment

  • Be the first to like this

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide

ED3 skid weigh series d

  1. 1. ED3 SkidWeigh Plus Series Management Tools to Improve Lift Truck Utilization In the world of material handling, warehousing and logistics everything needs to keep moving. Lift truck uptime is the key to productivity. Measuring performance against standard utilization factor in a real-time by collecting and updating raw data such as driving loaded / unloaded, standing loaded / unloaded, lift time, minimum load weight, number of loads,etc. will improve your bottom line immediately. All of the VMS systems collect large amount of data and compare lift truck utilization across the enterprise based on historical data (ignition switch time on, lift time, pallets stored, etc.) which in most of the cases is irrelevant to increase performance of the operators and vehicle utilization. In order to produce positive bottom line results with little upfront investment and relatively short payback you must manage the operation at a lower level and report productivity results in terms of vehicle utilization measured in real-time on an individual basis. Lift truck operator accountability incorporating visual remainder of the current utilization factor with exceptions reporting in real-time will result in sustainable improvements in operator performance and * On board weighing * Parts count by weight * Lift truck utilization * Downtime justification reporting * Overload warning * Lift truck impact detection * Excessive engine idling * Overspeed * OSHA safety check
  2. 2. STANDARD PRODUCT SPECIFICATIONS Technical Data Standard Features - - Weighing range up to 50000 lb. or kg - Single weighing channel - Lift-n-weigh load weighing procedure - English and French languages - Automatic calibration - Pressure transducer self testing function - Month/Day/Year LCD visual display - Hours/Minutes/Seconds LCD display - Graduation 1,5,10,50 and 100 Voltage from 12 to 55 V DC Operating current 40mA Technology, micro controller Real-time clock Four analog inputs USB port, optional RS232 port LCD display, 2 lines x 16 characters Display size 68 x 27 x 11 mm Character size 6.68 x 2.76 mm LED backlight High contrast LCD super twist display Keypad 16 key with tactile feedback Sealed keypad, watertight Functions overlay Enclosure ABS, 120 x 80 x 55 mm Weight, 0.5kg Operating temperature -20 C to +70 C Pressure Transducer (Swiss Made) Port, male thread 1/4”-18 NPT Built in pressure snubber NEMA 4X protection Reverse polarity protection Over voltage protection Short circuit protection CE conformity, EN 61326-2-3 Check weighing accuracy +/- 0.1 to 1% of lift truck lifting capacity Optional Features - Two weighing channels - Total load weight - On-board printers - Under utilization monitoring - Impact detection - Overload warning - Engine idle monitoring - Safety check monitoring & reporting - Alphanumerical keys - Manual input for Tare - Bluetooth on-board printer - Bluetooth module, long range - Load monitoring in % of lift capacity - Automatic zero weight re-calibration - Continuous load weight update - Operator ID# input function - Wireless web based reports - Enfora modem, FCC ID: MIVGSM0408 COMPACT SIZE & HEAVY DUTY - DESIGNED FOR MATERIAL HANDLING VEHICLE High contrast LCD display with LED backlight, super twist, 2 lines x 16 characters Clear cover, impact resistant with seamless foam-in-place gasket assures watertight and dust-tight seal ABS enclosure, NEMA Type 4X, flammability rating UL94-HB, IEC 60529, IP67 Surface mount printed circuit technology Liquid tight straight thru fitting, UL E-51579, CSA LR-93876 Universal power supply input from 12 to 55 V DC Mounting bracket with Cylindrical mount, neoprene, 1/4’-20 MATERIAL HANDLING DEALER ED3-V2-2012-D