Sandmaster 3000User Manuel For Model #MT3000Thank you for purchasing the Sandmaster 3000 by MT TOOLS! Get ready to enjoy a high performance sander that gives you the comfort that you deserve. MT TOOLS patented MOUSE TECH ergonomics gives you the comfort of your own computer mouse while using a powerful detail sander. Before you go and enjoy your product please take time to read the user manuel. 2009Michael TasevskiMAE 377 Project 0812/14/2009<br />WARNING:<br />SPECIFIC SAFETY RULES<br />• Hold power tools by insulated gripping surfaces when performing an operation<br />where the cutting tool may contact hidden wiring or its own cord. Contact with a<br />"
wire will make exposed metal parts of the tool "
and shock the operator.<br />• Use clamps or another practical way to secure and support the work piece to a<br />stable platform. Holding the work by hand or against your body leaves it unstable and<br />may lead to loss of control.<br />ALWAYS use safety glasses. <br />Always exhibit caution when charging and using the battery<br />Never use the battery for any other use other than intended<br />• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling,<br />and other construction activities. Wear protective clothing and wash exposed<br />areas with soap and water. <br />FUNCTIONAL DESCRIPTION<br />1762125146685<br /><ul><li>On/Off Switch
Ergonomic “MOUSE TECH” design grip and buttons.</li></ul>OPERATION:<br />Detail Sanding<br />The SANDMASTER 3000 is equipped with a pointed base which allows you to use it on large flat surfaces<br />and tight spots or corners.<br />375285038100Turning the Sander ON and OFF<br />• Insert Battery<br />• Push the button labeled “I” on the sander <br />to turn it “ON.” (See Figure 2) <br />• Push the button labeled “O” on the sander <br />to turn it “OFF.”<br />Inserting and Removing Battery<br />• Insert Battery by placing it into battery Port.<br />• Use clips on the side of the housing to secure battery.<br />• Remove Battery by releasing clips and pulling from port.<br /> Figure 2: “ON” button<br />381000034925Cleaning Vacuum Bag (Figure 3)<br />• After a period of use the vacuum bag will need to be removed.<br />• First remove the bag by pulling it out from the port.<br />• Turn cloth part of bag inside out to remove dust.<br />• Replace vacuum bag and continue use.<br />Replacing sanding sheets<br />• Detach the old sheet.<br />• Hold the tool with the sanding base facing upwards.<br />• Place the new sanding sheet onto the sanding base, by <br />matching it up to the base and attaching it to the Velcro hook & loop.<br /> Figure 3: Vacuum bag removal<br />TROUBLESHOOTING<br />Problem Possible Cause Possible Solution<br />• Unit will not start. • Battery pack not installed properly.<br />• Check battery pack installation.<br />• Battery pack not charged.• Check battery pack charging requirements.<br />THREE YEAR LIMITED WARRANTY<br />MT Tools will repair or replace, without charge, any defects due to faulty<br />materials or workmanship for three years from the date of purchase for tools.<br />PARTS LIST<br />