Experience the StoneTree®Advantage The New Generation of Concrete Fence Walls
Precast Boundary Walls
Decorative Concrete Fences
Sound Barrier Walls
Custom Architectural Walls
Decorative Concrete Columns
And many more!
What is StoneTree® Concrete Fencing?
Each piece is formed single panel & integratedcolumn in the manufacturing process
Increases speed of construction and provides greater job site safety
Textures or designs on both sides of the panels
Extremely versatile in design and can include features such as lighting and security components
Reflective sound barrier properties
CMU Block Walls
Other Concrete Fence systems such as VertiCrete
US Concrete Sierra Wall
CTU Precast (Marysville, CA)
StoneTree® Textures Split Face Block Slate Block Stacked Stone *Currently Available* Ashlar Stone Coral Stone Coral Stone/Split Face Combination Used Brick New Brick *Color is an additional option added by the contractor
How are they made?
AFTEC Precast Concrete Fence Forms Vertically Cast 6 Panels Per Concrete Fence Wall Form
Highly defined textures on both sides of the wall
Formed as a single integrated panel & column
6 foot high panel detail in Dry Stack
8 foot high panel detail in Ashlar
Installation StoneTree ®Walls are installed with AFTEC’s proprietary Rigid Footing Support system
The standard footing spacing is 15 foot / 4.5 meters on center.
A rigid structural support is embedded into the footing and protrudes up at least half of the height of the wall.
Designed for all applicable engineering requirements including wind load, soil and seismic conditions.
Installation Benefits of the Rigid Support System:
NO BRACING OR SHORINGduring installation. This provides the safest environment and results in the most stable method of installing a precast concrete fence-wall.
NO GROUTINGof columns and/or footings. In other systems this cannot take place until after the fence columns are set in place, which creates an unstable condition until the grout has cured.
STONETREE ® FOOTINGSwith Rigid Footing Supports self aligns each wall section as they are set in place which increases the speed of the installation process.
Installation Once the footings have been constructed, the column and panel wall sections are brought to the fence line to be set in place. The column end is set over the I-beam support while as the same time interlocking with the panel end already in place, creating a tongue and groove intersection. The wall is then aligned between the structural supports, lowered into position and the rigging is removed. Upon completion of the installation, caps are fixed in place to seal the columns. Coloring can be applied using concrete stains and sealers.
Single columns with ornamental iron railing
16 foot high DOT sound wall
Jensen Precast Product Offering
Lump Sum Price Including:
Columns & Caps
Caisson Footings (Cast-in-Place)
Installation – performed by installation contractor
Setting usually performed by contractor but could be performed by Jensen Precast when negotiated into the contract price.