BY SONJOY KUMAR BASAK Qvoice Companion Training NEXT 1
QVoice System <ul><li>What is Qvoice? </li></ul><ul><li>System Overview </li></ul><ul><li>Measurement Principle </li></ul>...
What is Qvoice? <ul><li>QVoice: Exceptionally efficient and versatile test system for analyzing the quality of speech and ...
System Overview <ul><li>Qvoice Smart </li></ul><ul><li>Qvoice Companion </li></ul><ul><li>Qvoice Symphony </li></ul>BACK N...
Qvoice Companion <ul><li>Qvoice is used primarily for network optimization & benchmarking operations for which the resourc...
Measurement Principle <ul><li>Speech between Qvoice mobile & QVS- Speech </li></ul><ul><li>Speech between Qvoice mobile & ...
Measurement Principle <ul><li>Chanel </li></ul><ul><li>Speech master </li></ul><ul><li>Speech Slave </li></ul>HOME 7 BACK ...
Measurement Principle <ul><li>Channel:  A channel is used for measuring speech/data quality via one mobile phone(or one IS...
Measurement Principle <ul><li>The following terms refer to the Master:  </li></ul><ul><li>MOC:  The master makes the call ...
Measurement Principle <ul><li>Maximum  call duration:  After  10 hours  of measurement operation Qvoice stops all measurem...
Qvoice Features <ul><li>Clear parameter administration </li></ul><ul><li>Services & measured data </li></ul>HOME 11 BACK N...
Clear Parameter Administration <ul><li>Subscriptions:  summarise all the SIM data </li></ul><ul><li>Destinations:  contain...
Services and measured data <ul><li>Speech </li></ul><ul><li>Video telephony </li></ul><ul><li>Ping </li></ul><ul><li>HTTP ...
Starting Qvoice Companion Start the PC/Notebook Double Click the “Qvoice Companion” from Desktop shortcut. Then open <<Qvo...
MUA & MEA  are ready then  Click <<Start UI >> button HOME 15 BACK NEXT
Address: localhost User name: administrator Password: password Then Click Login button HOME 16 BACK NEXT
Starting progress HOME 17 BACK NEXT
Sequence of Configuration Steps <ul><li>H/W Configuration </li></ul><ul><li>Subscription  Editor </li></ul><ul><li>Destina...
H/W Configuration <ul><li>All port configure are enable then go to next step  </li></ul>HOME 19 BACK NEXT
Subscription Editor Click Subscription Editor HOME 20 BACK NEXT
Add New SIM Subscription HOME 21 BACK NEXT
Select SIM subscription HOME 22 BACK NEXT
Write the name ,Speech number, CS data number, MCC & MNC HOME 23 BACK NEXT
Save & Refresh subscription  list (Important) HOME 24 BACK NEXT
Destination Editor Select destination editor HOME 25 BACK NEXT
Add new destination HOME 26 BACK NEXT
Select CS destination HOME 27 BACK NEXT
Write the Name, Speech number & data number HOME 28 BACK NEXT
Always Save & Refresh After entering name & Cell number HOME 29 BACK NEXT
Measurement Program Editor <ul><li>A measurement program contains:  </li></ul><ul><li>1. Test Operations </li></ul><ul><li...
Select Measurement Program Editor HOME 31 BACK NEXT
HOME Add new Measurement Program  32 BACK NEXT
HOME Add new Test Operation 33 BACK NEXT
Select Speech Master HOME 34 BACK NEXT
Write Name & Test Operation setup  HOME 35 BACK NEXT
Always Save & Refresh After entering name & All setup HOME 36 BACK NEXT
Measurement Configuration Editor <ul><li>Measurement Channel </li></ul><ul><li>Subscription Used(=network provider, enable...
HOME Click Measurement Configuration Editor 38 BACK NEXT
Click Add new configuration HOME 39 BACK NEXT
Enter Name, Channel, Subscription name, Speech type(Master or slave), Destination & Channel Capabilities HOME 40 BACK NEXT
Channel Idle mode HOME 41 BACK NEXT
Start Selected Measurement Program HOME 42 BACK NEXT
Logout QVoice Companion  <ul><li>From the <<Control panel>> click the  <<Stop all Channels button </li></ul><ul><li>Wait f...
Stop all channels &  Wait for all measurement channels to stop HOME 44 BACK NEXT
Logout(+MU Shutdown) HOME 45 BACK NEXT
HOME Exit Login Box then Close MU Launcher 46 BACK NEXT
Double Click(Desktop shortcut) Qvoice Export  HOME 47 BACK NEXT
First Click Check box, Secondly click right button then select copy HOME 48 BACK NEXT
For change directory browse the folder HOME 40 BACK NEXT
HOME Create new folder  then ok 50 BACK NEXT
<ul><li>THANK YOU </li></ul>51
Upcoming SlideShare
Loading in …5
×

Qvoice Companion Training

1,201 views

Published on

0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,201
On SlideShare
0
From Embeds
0
Number of Embeds
13
Actions
Shares
0
Downloads
57
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide
  • QVoice: Exceptionally efficient and versatile test system for analyzing the quality of speech and data in mobile networks. Quality of service speech/video telephony/IP data transfer/MMS/SMS Air interface data Frequency spectrum /Channels Location &amp; Time by GPS
  • Start the PC/Notebook Double Click the “Qvoice Companion” from Desktop shortcut. Then open &lt;&lt;Qvoice Companion MU Launcher&gt;&gt;
  • Subscription Editor
  • Qvoice Companion Training

    1. 1. BY SONJOY KUMAR BASAK Qvoice Companion Training NEXT 1
    2. 2. QVoice System <ul><li>What is Qvoice? </li></ul><ul><li>System Overview </li></ul><ul><li>Measurement Principle </li></ul><ul><li>Qvoice Feature </li></ul><ul><li>Starting Qvoice Companion </li></ul><ul><li>Sequence of configuration steps </li></ul><ul><li>Logout Qvoice Companion </li></ul>BACK NEXT HOME 2
    3. 3. What is Qvoice? <ul><li>QVoice: Exceptionally efficient and versatile test system for analyzing the quality of speech and data in mobile networks. </li></ul><ul><li>Quality of service speech/video telephony/IP data transfer/MMS/SMS </li></ul><ul><li>Air interface data </li></ul><ul><li>Frequency spectrum /Channels </li></ul><ul><li>Location & Time by GPS </li></ul>BACK NEXT HOME 3
    4. 4. System Overview <ul><li>Qvoice Smart </li></ul><ul><li>Qvoice Companion </li></ul><ul><li>Qvoice Symphony </li></ul>BACK NEXT HOME 4
    5. 5. Qvoice Companion <ul><li>Qvoice is used primarily for network optimization & benchmarking operations for which the resource of a notebook pc are sufficient up to 4 measurement Channel can be used. </li></ul><ul><li>Speech measurements with perceptual evaluation of speech quality(p.862 according to ITU) are also possible by using MIAs(Measurement Interface Adapters) for the measurement Channels. </li></ul>HOME 5 BACK NEXT
    6. 6. Measurement Principle <ul><li>Speech between Qvoice mobile & QVS- Speech </li></ul><ul><li>Speech between Qvoice mobile & Answer station </li></ul><ul><li>IP data(HTTP, FTP, Video Streaming,…. ) between Qvoice mobile & public server </li></ul><ul><li>IP data (same as 3, Plus UDP) between Qvoice & QVS data </li></ul><ul><li>Video telephony, MMS, SMS,….between two Qvoice mobile </li></ul>HOME 6 BACK NEXT
    7. 7. Measurement Principle <ul><li>Chanel </li></ul><ul><li>Speech master </li></ul><ul><li>Speech Slave </li></ul>HOME 7 BACK NEXT
    8. 8. Measurement Principle <ul><li>Channel: A channel is used for measuring speech/data quality via one mobile phone(or one ISDN Channel/one PSTN line) </li></ul><ul><li>Master & Slave: The master always the first call & controls the measurement. With Qvoice each measurement Channel can be configured as a Master or as a Slave. Master & Slave must be equipped with a DSP </li></ul>HOME 8 BACK NEXT
    9. 9. Measurement Principle <ul><li>The following terms refer to the Master: </li></ul><ul><li>MOC: The master makes the call </li></ul><ul><li>MTC: T he master is called by the slave </li></ul><ul><li>UPLINK: The master transmits speech samples (measured at the slave) </li></ul><ul><li>DOWNLINK: The master receives speech samples </li></ul><ul><li>The measurement procedure is always controlled by the master </li></ul>HOME 9 BACK NEXT
    10. 10. Measurement Principle <ul><li>Maximum call duration: After 10 hours of measurement operation Qvoice stops all measurements & then starts up again using the same measurement parameters. The size of the measurement files will be limited & the time re-transmitted to the slaves. </li></ul>HOME 10 BACK NEXT
    11. 11. Qvoice Features <ul><li>Clear parameter administration </li></ul><ul><li>Services & measured data </li></ul>HOME 11 BACK NEXT
    12. 12. Clear Parameter Administration <ul><li>Subscriptions: summarise all the SIM data </li></ul><ul><li>Destinations: contain all the information on the remote stations/servers </li></ul><ul><li>Measurement Programs: contain the specific measurement instructions </li></ul><ul><li>Measurement Configurations: summarise all the measurement information for one Channel </li></ul>HOME 12 BACK NEXT
    13. 13. Services and measured data <ul><li>Speech </li></ul><ul><li>Video telephony </li></ul><ul><li>Ping </li></ul><ul><li>HTTP </li></ul><ul><li>FTP </li></ul><ul><li>UDP </li></ul><ul><li>Email </li></ul><ul><li>WAP </li></ul><ul><li>Video streaming </li></ul><ul><li>MMS </li></ul><ul><li>SMS </li></ul>HOME 13 BACK NEXT
    14. 14. Starting Qvoice Companion Start the PC/Notebook Double Click the “Qvoice Companion” from Desktop shortcut. Then open <<Qvoice Companion MU Launcher>> HOME 14 BACK NEXT
    15. 15. MUA & MEA are ready then Click <<Start UI >> button HOME 15 BACK NEXT
    16. 16. Address: localhost User name: administrator Password: password Then Click Login button HOME 16 BACK NEXT
    17. 17. Starting progress HOME 17 BACK NEXT
    18. 18. Sequence of Configuration Steps <ul><li>H/W Configuration </li></ul><ul><li>Subscription Editor </li></ul><ul><li>Destination Editor </li></ul><ul><li>Measurement Program Editor </li></ul><ul><li>Measurement Configuration Editor </li></ul>HOME 18 BACK NEXT
    19. 19. H/W Configuration <ul><li>All port configure are enable then go to next step </li></ul>HOME 19 BACK NEXT
    20. 20. Subscription Editor Click Subscription Editor HOME 20 BACK NEXT
    21. 21. Add New SIM Subscription HOME 21 BACK NEXT
    22. 22. Select SIM subscription HOME 22 BACK NEXT
    23. 23. Write the name ,Speech number, CS data number, MCC & MNC HOME 23 BACK NEXT
    24. 24. Save & Refresh subscription list (Important) HOME 24 BACK NEXT
    25. 25. Destination Editor Select destination editor HOME 25 BACK NEXT
    26. 26. Add new destination HOME 26 BACK NEXT
    27. 27. Select CS destination HOME 27 BACK NEXT
    28. 28. Write the Name, Speech number & data number HOME 28 BACK NEXT
    29. 29. Always Save & Refresh After entering name & Cell number HOME 29 BACK NEXT
    30. 30. Measurement Program Editor <ul><li>A measurement program contains: </li></ul><ul><li>1. Test Operations </li></ul><ul><li>2 . Parameter for each Test Operation </li></ul>HOME 30 BACK NEXT
    31. 31. Select Measurement Program Editor HOME 31 BACK NEXT
    32. 32. HOME Add new Measurement Program 32 BACK NEXT
    33. 33. HOME Add new Test Operation 33 BACK NEXT
    34. 34. Select Speech Master HOME 34 BACK NEXT
    35. 35. Write Name & Test Operation setup HOME 35 BACK NEXT
    36. 36. Always Save & Refresh After entering name & All setup HOME 36 BACK NEXT
    37. 37. Measurement Configuration Editor <ul><li>Measurement Channel </li></ul><ul><li>Subscription Used(=network provider, enabled services, etc) </li></ul><ul><li>Measurement program(=service to be measured, parameters) </li></ul><ul><li>Destination(remote station) for the test operations </li></ul><ul><li>Channel Capabilities(Example: <<Trace GSM>>) </li></ul>HOME 37 BACK NEXT
    38. 38. HOME Click Measurement Configuration Editor 38 BACK NEXT
    39. 39. Click Add new configuration HOME 39 BACK NEXT
    40. 40. Enter Name, Channel, Subscription name, Speech type(Master or slave), Destination & Channel Capabilities HOME 40 BACK NEXT
    41. 41. Channel Idle mode HOME 41 BACK NEXT
    42. 42. Start Selected Measurement Program HOME 42 BACK NEXT
    43. 43. Logout QVoice Companion <ul><li>From the <<Control panel>> click the <<Stop all Channels button </li></ul><ul><li>Wait for all the measurement channels to stop </li></ul><ul><li>Exit Qvoice with <<Logout(+MU Shutdown)>> </li></ul><ul><li>NOTE: Always First Stop Master Channel then stop Slave </li></ul>43 HOME BACK NEXT
    44. 44. Stop all channels & Wait for all measurement channels to stop HOME 44 BACK NEXT
    45. 45. Logout(+MU Shutdown) HOME 45 BACK NEXT
    46. 46. HOME Exit Login Box then Close MU Launcher 46 BACK NEXT
    47. 47. Double Click(Desktop shortcut) Qvoice Export HOME 47 BACK NEXT
    48. 48. First Click Check box, Secondly click right button then select copy HOME 48 BACK NEXT
    49. 49. For change directory browse the folder HOME 40 BACK NEXT
    50. 50. HOME Create new folder then ok 50 BACK NEXT
    51. 51. <ul><li>THANK YOU </li></ul>51

    ×