Presentation2.1

289 views

Published on

wala pa gyud tawon ko nahuman :(

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
289
On SlideShare
0
From Embeds
0
Number of Embeds
3
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Presentation2.1

  1. 1. Digital Central Supervisory Alarm Panel (DCSAP)
  2. 2. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display The front panel is comprised of two digital displays,
  3. 3. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display A series of labeled indicating LEDs
  4. 4. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display And several toggle switches.
  5. 5. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display The large four digit seven segment display on the front panel shows the value of ammonia concentration reported by the Ammonia Leak Detector on the selected channel
  6. 6. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display The smaller two digit seven segment display on the front panel shows the current selected channel which is display on the large four digits display
  7. 7. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Power LED The Power LED is lit green whenever power is applied the Digital Central Supervisory Alarm Panel (DCSAP)
  8. 8. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Lamp Test switch The Lamp Test switch is used that all LEDs on the panel are functional.
  9. 9. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Lamp Test switch To test the lamps, be sure that no alarms or warning are active, then press and hold the lamp test switch and confirm that all LEDs and lamps are light as intended. Note that all six digits on the two digital display should indicate 8(eight).
  10. 10. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Common Warning silenced Switch Is used when an early warning contact open is detected on any channel.
  11. 11. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Common Warning silenced Switch To silenced the alarm horn, move the switch to the right to the silence position. When the warning signal is remove, the alarm horn will sound again until the silence switch is return to the left normal position.
  12. 12. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Increment & Decrement switches The Increment & Decrement momentarily toggle are uses to select the channel to be display.
  13. 13. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Increment & Decrement switches The selected channel is shown on the smaller two digit display.
  14. 14. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Increment & Decrement switches Momentarily pushing the Increment will increase the channel by one.
  15. 15. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Increment & Decrement switches While momentarily pushing the Decrement switch will decrease the channel by one.
  16. 16. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Increment & Decrement switches The switches can also be pushed and held, the channel will increase (decrease at about 2 channels per second. Allowing quick selection of a channel several channels away from the starting channel.
  17. 17. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Warning and Alarm LEDs A Yellow warning and Red alarm LED are provided for each channel.
  18. 18. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Warning and Alarm LEDs If a warning contacts for the channel are open the Yellow warning LED will light.
  19. 19. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Warning and Alarm LEDs If the alarm contacts for the channel are open the Red alarm LED will light.
  20. 20. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Channel alarm acknowledge switch An alarm acknowledge switch is provided for each channel.
  21. 21. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Channel alarm acknowledge switch When an alarm is receive for the channel, the alarm horn will sound until the alarm is acknowledge.
  22. 22. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Channel alarm acknowledge switch To silence the alarm horn, move the switch to the right to silent position.
  23. 23. Digital Central Supervisory Alarm Panel (DCSAP) DESCRIPTION Front Panel Display Controls and Indicators Channel alarm acknowledge switch When the alarm signal is removed, the alarm horn will sound again until the silent switch is returned to normal position.

×