Bea catalogue

531
-1

Published on

Published in: Technology, Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
531
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
10
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Bea catalogue

  1. 1. Versatile and modular UHF Audio Monitoring system. High audio quality, low power consumption and miniaturised dimensions thanks to the patentedTMVWB transmission system. Ancillary equipment also allows re-routing of the audio signal through several types of communication channels. UHF AUDIO MONITORING TMWB The Time Modulation Very Wide Band (TMVWB) is a pulsed transmission technique developed and patented by BEA. This proprietary modulation reduces the probability of detection and interception with RF detectors or other conventional sweeping techniques and drastically reduces the average power consumption of the transmitter, allowing operating times over 30 times longer than conventional transmitters with the same peak output power level. TMVWB devices produce an excellent audio quality thanks to the wide bandwidth and high dynamic range, and are particularly indicated for long term deployments using small battery packs.
  2. 2. The TMVWB family of transmitters is characterised by a thin package, making it an ideal candidate for deployments where deep concealment is paramount. Available in several versions, each one developed to answer specific operational requirements and fully compatible with all other system components, BEA’s micro transmitters can also be remotely controlled by an external miniature RF Switch. Transmitters Micro2 NT Represents the basic transmitter of the TMVWB family and is characterised by an exceptionally small footprint. Its very low power consumption allows operating times in excess of 700 hours using a standard 9 volt Lithium non rechargeable battery. Adoption of the latest generation of semiconductor devices and a carefully designed layout ensure frequency stability and power efficiency. It can be easily concealed, and includes a thin wire antenna for quick transmitter installation and rapid system deployment. Micro2 HP NT A high powered version of the Micro2 NT is also available in order to provide a robust radio link in situations where longer distances between the target and the observation post may be required. The addition of an internal RF amplifier increases the operational range of the Micro2 HP NT transmitter whilst maintaining power consumption well within the capability of battery packs. The built-in AGC ensures an optimal audio level even in difficult acoustical environments. Micro3 A revised modulator gives Micro3 an extended audio bandwidth of up to 8 KHz, providing exceptional speech intelligibility even in reverberant acoustical environments. The built-in automatic microphone gain control ensures that an optimal audio level is transmitted at all times, irrespective of the acoustical level in the environment. Micro2 ST Micro2 ST pushes the boundaries of concealment & miniaturisation. This special-purpose transmitter uses a proprietary low profile radiator and matching network design instead of the usual 1/4 wave wire antenna. The solution decreases its effective footprint and thus allows rapid deployment in confined spaces without the need to worry about the placement of the antenna. Micro2 Magnetic Micro2 Magnetic is a coin-shaped transmitter with microphone, antenna and battery embedded in a compact package. The magnetic support allows quick installations onto metal surfaces that, thanks to our proprietary matching network, will also act as an antenna. Easy to use and to conceal: once set up, the two non-rechargeable Lithium batteries ensure up approx. 200 hours working. NEW
  3. 3. Master MTC Universal docking station for all BEA RF audio transmitters: it contains the user interface, power management system, audio and control buses management. Different RF modules can be seamlessly fitted onto the receiver: this approach has the advantage of providing the end user with a common receiving platform that can be used with a variety of covert transmitters, substantially reducing costs and the amount of training required whenever a new covert device is introduced in the end user's kit. A user-friendly interface enables monitoring of the device’s status, switching of the reception frequency and control of the optional audio recorder. External connectors, carrying digital and analogue audio signals, allow for live monitoring and re-routing of the signal via other RF or wired vectors and the built-in rechargeable lithium battery pack gives up to 8h of continuous operation. REC VERSION On request, the MTC can also be equipped with an embedded digital recorder; the recorded audio can be retrieved using a custom software application thus ensuring the safety of the recorded tracks. Memory sizes of up to 16GB are currently supported by the device. Modulo MC The Modulo MC receives and demodulates the RF signal from all our TMVWB transmitters. Baseband demodulation and processing is carried out by a high performance microcontroller, allowing a better signal to noise ratio compared to receivers from the previous generation. Receivers Micro RL NT Compact single channel receiver unit designed for quick operations. The Micro RL NT is factory set on the frequency and bandwidth of a chosen transmitter (Micro2 or Micro3 family). NT and PLUS REC VERSION The recorded audio is saved to a removable microSD card using a proprietary file system that can only be read by a specialized software application provided by BEA. This ensures that only authorized parties can access the recordings. Micro RL PLUS Micro RL PLUS has 4 factory set frequencies: 300 | 325 | 345 | 365 MHz that can be manually selected by the user. Micro3 signal requires dedicated version. The receiving part of the system offers two options: - a modular solution allowing to manage Micro2 and Micro3 transmitters set on different frequencies and with advanced features. - a compact dedicated tactical receiver, MICRO RL, factory set on specific Micro2 or Micro3 transmitter frequencies. The REC version embeds an SD-card based digital recorder, where audio is saved using a proprietary file system.
  4. 4. Relaunchers Delta GSM repeater for the TMVWB transmitters. It features an auxiliary audio input that can be used to connect a local microphone or an additional RF receiver. Receiver frequency can be changed remotely and an integrated AFC periodically tracks the transmitter frequency, ensuring automatic correction of any drift. Dual SIM capability increases the reliability of the communication. The device provides several sensors that can be programmed to trigger a call and/or a recording, as well as auxiliary digital Inputs and Outputs. Alarms and behaviours can be programmed via DTMF, SMS messages and using the optional PC interface ENEA MANAGER, allowing also the scheduling of unattended activities. Micro3 T requires dedicated version. REC VERSION An internal solid state recorder is provided in the Delta REC version, allowing local audio recording as well as real time monitoring. Audio files can be created whilst the GSM module is off and downloaded at a later time, thus preventing discovery during an anti- sweeping activity. Track length can be configured by the user for easier download and processing. Max. recording capacity: 18 hours. Ponte NT Ponte is a power efficient repeater for transmitters belonging to the TMVWB family. The signal received by the Modulo MC interfaced to the repeater is retransmitted over one of four available channels within the same 300-390 MHz band. It incorporates an automatic frequency correction algorithm that ensures long- term signal quality during extended deployments in harsh environments. An internal rechargeable battery pack allows rapid deployment of the Ponte even when a power source is not immediately available. RF/GSM Interface This interface receives and decodes the signal from the TMVWB transmitters and forwards it to the GSM audio monitoring devices ENEA/ENEA REC. This solution increases the modularity and interoperability of several BEA solutions as it allows the Enea device to manage the input from a wireless microphone. Ponte Rugged Tactical deployment solution embedded in a ruggedized case. Provided with LiPo rechargeable batteries for an autonomous activity. Capacity can be customized based on customer needs. LED placed externally on the case allow a remote monitoring of the unit activity and of the batteries status. QUICK TIP Receiver Interface This stand-alone hardware interface allows re-routing of the audio signal received by the modulo MC via digital encoding systems and IP senders. The received frequency is set by the Master MTC and the signal can be monitored locally using headphones.
  5. 5. QUICK TIP Power Management Remote Control Switch &TC SWITCH is a miniaturised RF controller that can be used to remotely enable/disable external loads. Switch is Configurable via PC and easy to install since only two connections are required, one to the DC power supply (up to 15V) and the other to the load. The standard receiver can drive a single external load; on request, however, it is possible to customize the system, enabling it to drive up to 3 independent channels: two with maximum load of 5 A and one with maximum load of 2 A. On request, it can also be equipped with five digital level outputs, enabling the Switch to interface with external electronic equipment. PW 1240 40 mA 12 V power supply for all Micro2 and Micro 3 transmitters. Micro Battery Stick Small and slim, it embeds a sensitive Knowles microphone and a 60 mAh – 12 V LiPo source. It’s the ideal solution for quick deployment in a short term installation, where a good radio link is paramount Micro2 HPTablet Rugged tablet embedding one Micro2 T HP/Micro 2 NT transmitter and 3 off 1400 mA 3.6 V LiPo batteries. A switch on the device activates the transmission. The transmitter can be removed from the tablet and used in other concealments.
  6. 6. BEA’s product range includes effective tools for the acquisition and management of audio data. Based on the complexity of the requirement and the number of target different solutions are available: VicRecorder VicRecorder GSM This recording suite allows the recording and processing of audio signals coming from our range of RF receivers directly on a standalone PC. It extends the recording capacity of local receivers by using the PC HDD. The application is supplied and licensed on a dongle, giving the user flexibility on the hardware side. If a suitable modem is connected, the application can also manage audio content delivered through the GSM network. The audio signal is recorded on the computer's HDD without alteration and, for monitoring and playback purposes, VICRECORDER allows the user to apply audio enhancement in real time to both“live”and recorded signals. The tracks can be managed, processed and exported in a blotter for evidence use. CD/DVD Burning functionality is included. Gate Professional lawful interception system designed to monitor the activity of multiple targets over fixed and mobile telephone networks as well as over the internet. Gate represents a powerful client/server solution for Law Enforcement Agencies that need to centralise their monitoring activity. Please contact our Sales Department to evaluate best configuration for your operational needs. Recording & Processing
  7. 7. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US
  8. 8. Digital audio surveillance system characterised by reduced dimensions, extensive features and high reliability: ideal for a quick deployment and for both short and long term operations. The proprietary audio encoding and encryption minimises the possibility of interception. UHF AUDIO MONITORING DIGITAL Professional audio surveillance system employing proprietary digital encoding and FSK modulation and allowing safe data transmission. The system operates between 431 and 439 MHz and its narrow-band emission resembles that of low bit-rate ISM telemetry services, thus reducing detection probability. Easily configurable: the operating parameters can be easily set via software, with a PC user interface, or directly via the Digimicro R. The system features a digital transmitter, that combines extremely compact dimensions with high output power and exceptional audio quality.
  9. 9. DigimicroT Small footprint, high output power and exceptional audio quality strongly characterise thetransmitter.Thelevelofthe RF output power is easily configurable from 50 mW to 800 mW over 5 steps by a dedicated software interface or from the Digimicro R receiver. The audio encoder employed in the transmitter has a wide bandwidth and high dynamic range which, when combined with the ability of configuring the gain of the microphone front-end, makes the DigimicroT ideal for deployment in difficult acoustic environments. The device is supplied in OEM version with a heat-shrink sleeve in order to minimise dimensions or in plastic rugged case. Digimicro LP A low powered version of the Digimicro T is also available in order to provide a solution in body worn and battery power supplied application. The output power is fix on 50 mW and allows a range up to 300 m. with a contained power consumption (40mA). The device is supplied in OEM version with a grey heat-shrink sleeve in order to minimise dimensions. Transmitters Remote Control Switch &TC SWITCH is a miniaturised RF controller that can be used to remotely enable/disable external loads. Switch is Configurable via PC and easy to install since only two connections are required, one to the DC power supply (up to 15V) and the other to the load. The standard receiver can drive a single external load; on request, however, it is possible to customize the system, enabling it to drive up to 3 independent channels: two with maximum load of 5 A and one with maximum load of 2 A. On request, it can also be equipped with five digital level outputs, enabling the Switch to interface with external electronic equipment. Digimicro Interface Hardware and software programming interface to set Digimicro transmitter and Modulo. PW 9500 9 V power supply for Digimicro T and Digimicro LP
  10. 10. Master MTC Universal docking station for all BEA RF audio transmitters: it contains the user interface, power management system, audio and control buses management. Different RF modules can be seamlessly fitted onto the receiver: this approach has the advantage of providing the end user with a common receiving platform that can be used with a variety of covert transmitters, substantially reducing costs and the amount of training required whenever a new covert device is introduced in the end user's kit. A user-friendly interface enables monitoring of the device’s status, switching of the reception frequency and control of the optional audio recorder. External connectors, carrying digital and analogue audio signals, allow for live monitoring and re-routing of the signal via other RF or wired vectors and the built-in rechargeable lithium battery pack gives up to 8h of continuous operation. REC VERSION On request, the MTC can also be equipped with an embedded digital recorder; the recorded audio can be retrieved using a custom software application thus ensuring the safety of the recorded tracks. Memory sizes of up to 16GB are currently supported by the device. Modulo DC The Modulo DC receives and demodulates the RF signal from Digimicro transmitters. Baseband demodulation and processing is carried out by a high performance microcontroller. Receivers Digimicro R Digimicro R is a light and tactical receiver, developed to facilitate rapid deployment in operational scenarios where the target is close by. Configuration of the device is fast and intuitive: the provided digital display allows setting and complete monitoring of the system's features. The user is able to program and select up to eight RF channels and modify the tone and level of the received audio signal. User can send the new settings to the transmitter via serial data cable. The unit works with an integrated 350 mA rechargeable Li-Po battery granting approx 8 hours operational activity. AC/DC adaptor/charger included. Digimicro Modulo Digimicro T can also be received by Digimicro Modulo. It re-launches the received audio through a dedicated leased line allowing audio monitoring at the control centre. Digimicro Amplifier The Amplifier acts as test device to check the transmitter/receiver link and as a local audio amplifier for live monitoring of the signal received by the Digimicro Modulo. Relaunchers
  11. 11. BEA’s product range includes effective tools for the acquisition and management of audio data. Based on the complexity of the requirement and the number of target different solutions are available: VicRecorder VicRecorder GSM This recording suite allows the recording and processing of audio signals coming from our range of RF receivers directly on a standalone PC. It extends the recording capacity of local receivers by using the PC HDD. The application is supplied and licensed on a dongle, giving the user flexibility on the hardware side. If a suitable modem is connected, the application can also manage audio content delivered through the GSM network. The audio signal is recorded on the computer's HDD without alteration and, for monitoring and playback purposes, VICRECORDER allows the user to apply audio enhancement in real time to both“live”and recorded signals. The tracks can be managed, processed and exported in a blotter for evidence use. CD/DVD Burning functionality is included. Gate Professional lawful interception system designed to monitor the activity of multiple targets over fixed and mobile telephone networks as well as over the internet. Gate represents a powerful client/server solution for Law Enforcement Agencies that need to centralise their monitoring activity. Please contact our Sales Department to evaluate best configuration for your operational needs. Recording & Processing BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. ABOUT US
  12. 12. The GSM channel guarantees secure and reliable monitoring in situations where conventional RF devices cannot provide a safe or acceptable operating range. Extensive configurable automatic behaviour, exceptional audio quality enhanced by high gain microphones and ease of operation are the main features of our systems. GSM AUDIO MONITORING
  13. 13. QUICK TIPRF/GSM Interface Enea features exceptional audio quality also enhanced by high gain microphones. The two wired microphones supplied with the ENEA can be concealed in different areas of the target vehicle, making it possible to focus on conversations in specific location inside the vehicle. RF transmitters of the Micro family, developed and patented by BEA, can be easily interfaced to the ENEA in order to extend the operational flexibility of the unit. The RF/GSM Interface receives the audio signal from the TMVWB transmitter and is connected to the Enea for relaunch via the GSM channel. The receiving frequency is remotely programmed via DTMF. Using this configuration, the Enea unit can therefore have remotely selectable wired and wireless microphones. Enea System Enea/Enea Rec Versatile and flexible state of the art audio monitoring tool: sensors and behaviour can be remotely programmed, allowing the user to update the unit in real time, according to the operational needs. It automatically calls the listening center in case of motion sensor activation, VOX event or digital input. Light sensor for discovery detection. Security Code must be entered in case of an incoming call from the monitoring center, to avoid unauthorized listening. The communication reliability is ensured by its 2 SIM cards capability. The unit can be programmed to switch (automatically or manually) between two GSM providers, according to the BTS signal quality. Enea Rec includes a solid state recorder with 18 hours recording capacity that can be activated if the GSM signal is lost or if RF emission is not advisable. It can be programmed to automatically start recording when the audio is detected even without GSM activation (anti- sweeping). Recording track length can be set from 15 up to 1080 minutes. Manual or automatic track download can be performed when the operational conditions allow GSM communications to take place. The unit can be remotely programmed via SMS and DTMF tones or through the graphic interface ENEA MANAGER (optional). ENEA can also be set to transmit status information via SMS. Enea Manager Enea Manager is a powerful tool designed to simplify the tasks of programming and managing remote Enea, Enea REC, Delta and Delta REC units. The software provides the operator with a friendly graphical user interface and allows the management of multiple units. The audio can be listened to in real time and simultaneously recorded on the PC's hard disk. Remotely recorded tracks can be manually downloaded or scheduled for automatic recovery at specific times of the day. Enea Manager is composed by: Enea Manager SOFTWARE: proprietary application GSM modem: custom modem with embedded DTMF tones decoding allowing to operate the software from a mobile workstation. Enea Manager is composed by: Enea Manager SOFTWARE: proprietary application GSM BEA modem: custom modem with embedded DTMF tones decoding allowing to operate the software from a mobile workstation. Buffer Battery Ancillary equipment to extend the operational life of the Enea, when the vehicle power supply is switched off. It is placed between the Enea and the car power supply and includes two rechargeable 1400 mA batteries in a plastic case allowing full operation for approx. 5 hrs and approx. 20 hrs in stand- by. Compatible will all versions of Enea and Enea Rec
  14. 14. NEW Easily deployable unit in a robust plastic case, featuring an embedded GSM antenna, a sensitive microphone and an internal rechargeable LiPo battery. Developed with an emphasis on battery life, the unit can also be remotely put into hibernation mode to save even more power. All operational settings can be configured remotely via SMS. The unit acknowledges receipt of the command with an answer sent by SMS to the telephone that sent the original request. Configurable behaviours: Alarms enable/disable: - motion sensor: sleeping/wake up of the unit and voice call to the programmed number - Vox sensor: voice call to the programmed number. The two sensors can work at the same time. Alarm release time configurable between 1-9 minutes. In case of no repeated alarm the unit hangs up. Mute enable/disable: an SMS allows the unit to accept voice calls. This message has to be sent before a manual call to the unit. This serves as a security feature as well as a filter to avoid unwanted line engagements and reduce the amount of battery consumption Microphone sensitivity is settable over 4 levels. Hang up: it is possible to interrupt the unit call via SMS Restore unit default setting Date and time setting, to program the internal clock. In case of power disconnection, the unit loses this configuration and must be reprogrammed via SMS. The unit is able to send an SMS with the network information relative to the current active BTS and its neighbours. These positions can be also displayed on the tracking GIS application DOGE. The positions are stored in the database and can be retrieved for later playback and analysis. Thanks to its embedded rechargeable 1400 mA 3.6 V LiPo battery the unit can transmit audio for approx. 6 hrs (estimated with a network RSSI of -75 dBm). The battery can be externally recharged by removing the case protection lid. The unit can be supplied with an optional lid with connector to power the unit from an external source. Ancillary dedicated converters for connection to the mains and to a vehicle, as well as external battery packs can be supplied on request. The basic version uses an embedded microphone, it is however possible to supply the unit with an external microphone. Please contact our office to discuss the best solution for your operational needs. Easy GSM
  15. 15. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US
  16. 16. Programmable digital micro-recorders with removable microSD memories enabling the quick collection of information. High audio quality, clear speech intelligibility and configurableVox. The proprietary file format and time stamp ensure integrity of collected data. DIGITAL MICRORECORDERS
  17. 17. ADMFlash Digital audio micro recorders, extremely effective and easy to use. Suitable for a large range of applications and completely programmable. Knowles active microphones ensure a faithful source acquisition and an optimal intelligibility of speech, even in presence of strong background noise, without the typical artefacts associated with the analysis/ synthesis type of coders (e.g. GSM, CELP). Data is recorded on removable microSD. Compatible Micro SD cards from 1 to 8 Gb per slot. Recording can be activated automatically by the internal Vox functionality that allows setting of the sensitivity threshold and release time. Audio tracks are encrypted using a proprietary format and stamped with a unique watermark assuring their authenticity. The recorded files can be downloaded onto a laptop for immediate management through the dedicated ADMFlash software. VIC280 SD recorders are available in different models according to the required application: VIC280 SD, holding 1 microSD card VIC280 2SD Slim, holding 2 microSD cards The small dimension make them easy to conceal in everyday objects. The units are supplied in a black plastic sleeve to limit the form factor and contain a miniaturised Li-Ion rechargeable battery. On request they can be supplied as OEM units without battery and sleeve or customised according to the user’s operational needs. ADMFlash is the dedicated software for the management, filtering and visualization of audio tracks recorded using the VIC280 family of micro digital recorders. It allows to: program the recorder listen the recorded tracks download the recorded tracks on the PC and to convert them into .WAV and .MP3 format graphically visualize the proprietary file format, allowing to listen and eventually convert only the part of the tracks of interest improve the speech thanks to a system of filtering and dynamic processing tools. VIC280 SD Recorders BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US
  18. 18. Small dimensions, smart power management, powerful audio are the common features of BEA GSM tracking units. A proprietary algorithm allows an innovative and accurate positioning, even in the case of lack of GPS coverage. When no database of the BTS position is available or a higher accuracy is needed, it is possible to create proprietary GSM map of an area using the CSS (Cell Site Survey System), thus tracking targets without GPS availability, but with accuracy and reliability. GSM TRACKING The SMS sent by the GSM tracking units to the control centre contains the information of the Main Cell that registered the active terminal. Furthermore the operator can set the remote unit to send also details on the six adjacent cells, useful to get the geographical position of the target. These information are used by DOGE to display the position according to the database available: free database GSM provider database CSS database
  19. 19. CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it ABOUT US international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an Quad Finder LL /V Low power compact GSM unit supplied in plastic cover for concealment on targets. Easy to program with SMS transmitted by a mobile phone, it communicates its BTS positional information via SMS to the monitoring station, which provides a display of its location on dedicated maps using DOGE software. Polo CSS Firmware add-on to all Polo versions to perform data collection for CSS database creation. Polo CSS can collect a set of information about the main BTS to which it is registered and of its adjacent cells and correlate them with the corresponding GPS position. Data collection can be performed even during the tracking activity: the user can retrieve the CSS content independently from the tracking data. Advanced operational strategies can be performed with real time data collection. With Doge CSS version, the user is able to use the Polo as collector unit, to download the collected data and to store them into the database. Doge CSS is an extension that requires a full of Doge software license. CSS (Cell Site Survey System) When no database of the BTS position is available or a higher accuracy is needed, it is possible to create proprietary GSM map of an area using the CSS, thus tracking targets without GPS availability, but with accuracy and reliability. CSS provides more precise target localisation than Time Advance estimation alone can. The information sent by the tracking unit is compared with data stored in the data base and the most likely target GPS positions are visualised on the mapping display. Developed with particular attention to power consumption in order to improve the battery duration, the device is usually asleep and wakes up according to the configuration setup. This allows deployment of the unit weeks before the operation is due to commence. QUAD FINDER LL V adds to the QUAD FINDER LL a microphone and a panic button to allow audio monitoring Remote Units Data Display The information sent via SMS are used by DOGE to display the position according to the database available. Free database: DOGE can use free web database where BTS information is available to locate the main BTS on a map. The quality of the positioning depends on the accuracy of the database. GSM provider database: External database supplied by the Service Provider can be load on DOGE database. The data can be processed and reported on maps using DOGE software, which displays the area associated with the BTS(s) where the device is located (Time Advance location estimation).
  20. 20. Nowadays targets are more and more aware of the possible threats and use countermeasures to prevent monitoring. In some operational environments a remotely controlled store and forward solution can be used to gather information without emitting detectable radio-frequency energy. The WIFI transmission technique is ideal for store and forward applications because it enables a faster connection, better range from the base station, and better security than Bluetooth. Moreover, In urban environments, a Wifi transmission is less suspicious than other RF emissions. STORE & FORWARD
  21. 21. QUICK TIP CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it ABOUT US international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an Thoro Thoro is a high quality digital audio recorder developed specifically for covert applications. Configuration and data download is performed via WIFI. The device supports mono and stereo recording via two external microphones. The low-noise analogue front-end and digitally controlled AGC ensures an optimal signal to noise ratio and its high quality 16bit ADC provides 86dB of dynamic range (excluding the AGC). The audio signal can be digitized using sampling rates between 8 and 32KHz and saved to memory in uncompressed PCM. The recorded audio is saved to an internal memory using a proprietary file system. Recordings must be extracted via a custom application that allows the conversion to a standard MP3 or WAV file. The unit, supplied with an 8 GB memory, allows more than 1 day of audio data to be stored, using the highest recording quality (16 bits 32 Khz). Memory sizes of up to 16GB are currently supported by the device and are available on request. Recording can be automatically activated by a VOX or vibration event or at specific times: the internal clock is powered by a separate miniature rechargeable Lithium battery, ensuring absolute accuracy of the recording time-stamps. Once programmed the user can switch the WiFi off and activate it manually with a dedicated remote control that also manages the unit power supply. Alternatively, the unit can be set for a periodic wake up and automatic download of the tracks. The configuration is performed over the air via the WiFi connection: - recording mode (mono/stereo) - recording quality (sample rate, bit depth) - date/time - VOX and motion threshold, release and attack times - one-off and periodic timed activations - SSID - WiFi channel - automatic WiFi activation and automatic track download The unit uses an internal chip antenna and is supplied in a robust plastic container. To facilitate its concealment, it can also be supplied in OEM version with thermoplastic sleeve that further reduces the unit’s footprint. A led on the unit reports power status, recording and downloading status. Please contact our Office for recommended ancillary items, such as high-gain receiving antennas that can extend the unit’s operational range. THORO MANAGER, supplied in the THORO KIT, is the custom application to manage the unit, read and download the audio files. The "Monitor" feature allows listening to the live audio and simultaneously record on the card. The monitoring feature is meant mainly to test the audio settings and not to perform a real time audio monitoring since, due to buffering requirements, there may be a delay whose entity depends on the bandwidth availability (<10 secs). The monitored audio is sent in the lowest bit depth (8bit) but is recorded using the settings given by the user.
  22. 22. BEA tracking units are the result of a cooperative effort utilising the extensive design and manufacturing experience of BEA and the real world knowledge of intelligence professionals. All tracking units are managed by DOGE, a proprietary dedicated interface available in client/server or as a standalone version with web link. GPS TRACKING Flexible and modular systems can be employed both as loggers and as real time tracking units, managed by a wide range of options for collecting, transmitting and displaying geographic position data on a map. The units are remotely configurable with a large number of event-action combinations, allowing advanced behaviours and smart power management. The positions through the GPS network can be stored on the units and transmitted via SMS, CSD, GPRS or satellite link.
  23. 23. NEW Tracking Devices Polo NT Polo NT is the latest addition to the GSM/GPS tracking product line. BEA has updated the design of this established GPS surveillance products to increase deployment versatility while reducing enclosure size and power consumption. Suitable for both tactical and long term installations, Polo NT is extremely easy to deploy, thanks to its minimal dimensions: it is available both in sturdy black Aluminium case and magnetic support and in bare-bones format for effective embedding and camouflage in daily life objects. Its multisource power supply allows connection both to the main source (7- 50 Vdc) of a vehicle and to an external one 3.7 Vdc buffer battery. The unit monitors the battery power consumption. Polo NT is characterised by an advanced power saving management: it is possible to configure alarms to separately manage the GSM and/or the GPS module (on/off) and other functionalities. the unit is able to monitor the GSM network: POLO switches the GSM module off, when no GSM coverage is detected; a time interval can be set between new connection attempts. the unit can be put into hibernation, allowing it to efficiently work as a logger. automatic antisweeping profiles can be enabled to ensure operational safety. Polo NT is an intuitive event/action programmable unit with alarm activation: movement, geo-fence, clocks, timers, country change, battery monitoring, etc. Configuration presets can be saved for automatic upload on connection. Polo NT is remotely managed via SMS and CSD and sends data via GSM or GPRS with a proprietary protocol, granting highly reliable communications. The user can also view the fix sent on a phone through the Garmin Mobile XT* application or via Internet on PDA (e-mail or DOGE Web Viewer connection). It works as GSM tracking unit when GPS coverage fails and sends GSM BTS info to the DOGE software allowing target localisation also in difficult conditions. Memory capacity: up to 1 million fixes. The data stored on the unit can be retrieved by the monitoring centre manually or automatically, through a selective and secure download that can be recovered in case of interruption. *Tested with Nokia N and E series Polo XX This version of Polo is encased in a plastic case housing two non-rechargeable high capacity battery. It also embeds GPS and GSM antenna. The unit can be set with a basic energy saving configuration to support extended deployments without operator intervention. Polo XX is provided with a magnetic mount for fast and easy installation. Polo NTV Polo NT with additional possibility of remotely monitoring the target audio. The voice feature does not increase the unit’s footprint and can be managed via DOGE or SMS. Polo V can be called or automatically calls the destination number based on the configured events automation. It can transmit GPS position via SMS in real time in order to track the target and monitor the audio signal in the vehicle at the same time. Audio files can be saved on dedicated applications developed by BEA.
  24. 24. Caboto Based on the main features of Polo, Caboto has in its compact dimension a 3,7 LiPo rechargeable battery and can be supplied by any source between 7-30 Vdc. External I/O is provided by an 8 pin connector that can be used to manage external activations and devices, as well as an external auxiliary power supply at 3.6 V. Caboto is highly configurable and enables advanced power saving and events monitoring strategies. Polo CSS Firmware add-on to all Polo versions to perform data collection for CSS database creation. Polo CSS can collect a set of information about the main BTS to which it is registered and of its adjacent cells and correlate them with the corresponding GPS position. Data collection can be performed even during the tracking activity: the user can retrieve the CSS content independently from the tracking data. Advanced operational strategies can be performed with real time data collection. With Doge CSS version, the user is able to use the Polo as collector unit, to download the collected data and to store them into the database. Doge CSS is an extension that requires a full of Doge software license. Globo Additionally to the SMS, CSD and GPRS communication channels, Globo adds satellite network service, thus improving the tracking possibilities in absence of GSM coverage. Iridium network enables user to receive real time cyclical position information and manage device configuration. It integrates a Caboto and an Iridium module, keeping the flexible features of all BEA GPS units. It can be powered with an external power supply ranging from 7 up to 50V. Globo is able to switch automatically between GSM and satellite communication channel following GSM network availability, or to be selectively registered to the GSM network or Iridium network only. The data message is transmitted across the Iridium satellite network utilizing inter-satellite links to reach the Iridium Gateway. From there the data message is transferred via e-mail and stored in a database for further data processing. Data messages are delivered following a “mail-box check” initiated by the remote application. Go GO is a “ready to go” GPS tracking unit contained in an automotive plastic case that holds GSM, GPS antennas. An optional additional lid containing a 1400 mAh Li-Po rechargeable battery extends the operativity when the main power source is not available. It is a powerful remote unit that can work as a logger or as a real time device unit with basic tracking configurations. It is easily event/action programmable. Our proprietary client/server GIS tracking application DOGE provides a user friendly interface to program the unit and monitor battery capacity. The unit employs a quad band GSM modem and uses SMS, CSD or GPRS protocols to send tracking information & alarms and receive configuration settings. NEW
  25. 25. Doge Proprietary software managing all GPS and GSM tracking units developed by BEA. Flexible and modular, it allows operation as both standalone workstation and on client/server basis and to manage a database with possible selections and filtering of the contained information. Its graphic interface is extremely intuitive and easily customizable by the customer. User management rights based on profiles, password protected. The client/server option allows an extranet connection on IP address to the Web Viewer interface. Communication between the remote unit and Doge is based on proprietary protocol, for high reliability & security. Positions sent by the remote units via SMS, CSD or GPRS, are displayed on MapPoint2010, Raster Maps, Google Maps or played on Google Earth with an external plug-in. Data can be exported in real time or saved in NMEA0183 format. Doge CSS When no database of the BTS position is available or a higher accuracy is needed, it is possible to create proprietary GSM map of an area using the CSS (Cell Site Survey System), thus tracking targets without GPS availability, but with good accuracy and reliability. CSS is a useful tool for the GSM tracking because it provides more precise target localisation than the Time Advance estimation technique. The information sent by the tracking unit is compared with data stored in the data base and the most likely target positions are visualised on the mapping display. Data collection for CSS database creation can be done through the GPS tracking unit Polo CSS and its versions. It can record a set of information about the main BTS to which it is registered and of its adjacent cells and correlate them with the corresponding GPS position. With Doge CSS software the user is able to set the Polo as collector unit, to download the collected data and to store them into the database. When the GSM remote unit sends an SMS with a GSM position the software searches and matches it in the database and displays the correlated GPS information on the map. Doge CSS is an extension of Doge software, so it requires full Doge license. Managing Software BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US
  26. 26. System designed to receive, record and play data acquired monitoring a target via fixed and mobile telephone network, RF eavesdropping and Internet connection. Powerful solution for Law Enforcement Agencies to process all data acquired and enhance the efficiency of their daily operations. The client/server architecture centralises the data and distributes them also to local or remote client workstations. LAWFUL INTERCEPTION
  27. 27. Gate The system access to the data is extremely secure. All collected information is recorded on a server where the operational policies are enabled according to a defined hierarchy. The clients transmit the entry request to the service connection manager in an encrypted way. At the same time all data are recoded onto the internal database, becoming available for future play back, analysis and investigation. Login and password are not memorized on the client to prevent unauthorized access. The files exported on CD-ROM/DVD are encoded with an algorithm to avoid any unauthorized reading in case of loss. Server The client/server system is expandable and it allows to add more servers to increase the acquisition performance and the amount of lines to be monitored. All clients are connected to the GATE SEVER through a LAN Network. Client GATE CLIENT terminal has been studied and developed to optimise and speed up all activities. Through a user friendly interface the operator can easily manage all data collected from the monitoring activity of: Fixed telephone line - audio and fax GSMNetwork-audio,SMSandvideocalls GSM and RF remote units E-mail and Internet web pages The software allows to manage the investigation from the very start, taking advantage of: real time audio and data playing pre-recorded play back automatic connection between tracking data (IRI/CDR) searching and ordering features blotter partial decrees managing Recorded data can be visualized on a table which sums up the most important information related to each record. Filtering of the list allows the operator to reach the desired record in a fast and easy way. In case of GSM connection the position of the BTS to which the target was registered during the monitoring activity is shown on the screen thus enabling also a target positioning. The system manager can: Create, modify or delete a complete monitoring activity that encompasses communications monitoring, target tracking and audio eavesdropping. Create, modify or delete investigation teams assigned to a monitoring activity. Create, modify or delete the profiles associated to each of the system’s authorised Operators Each database line corresponds to a decree. Clicking on it the administrator directly visualises and can modify all details about the decree. The “burn” feature sets the selected burning device and the backup interval.
  28. 28. Data Collection Management All collected data, coming from all operators, are available for cross- processing management. A specific ID card, containing personal details, address, vehicles, minutes, etc., can be connected to each data entry. Users can play, transcribe or write a brief resume of the track at the same time. In case of fast speech or strong pronunciation, the transcription can be facilitated by slowing down the speed during the listening, without altering pitch and tone. To facilitate the editing of the draft it is possible to set the option of cyclical repeat of the listened track. This feature can be directly managed by keyboard. It also possible to insert some track markers to quickly visualize a relevant range in the timeline. Speech identification is made easier by using the available noise filter. VICRECORDER This recording suite allows the recording and processing of audio signals coming from our range of RF receivers directly on a stand alone PC. It extends the recording capacity of local receivers by using the PC HDD. The application is supplied and licensed on a dongle, giving the user flexibility on the hardware side. If a suitable modem is connected, the application can also manage audio content delivered through the GSM network. The audio signal is recorded on the computer's HDD without alteration and, for monitoring and playback purposes, VICRECORDER allows the user to apply audio enhancement in real time to both“live”and recorded signals. The tracks can be managed, processed and exported in a blotter for evidence use. CD/DVD Burning functionality is included. The tracks can be recorded in three ways: Signal-driven trigger The application monitors the level of the incoming signal and begins recording once a set threshold is exceeded. Manual recording Recording is manually initiated by the user via simple commands on the user interface. Modem trigger Recording is initiated once an incoming call is detected on a GSM modem connected to the PC. Audio analysis and filtering tools can be used to enhance the speech quality during the transcription process: - Frequency analysis - FFT manual filter - FFT tone filter - Broadband FFT filter - Low Shelf/High Pass filter - Fully Parametric/Band Pass filter - High Shelf/Low Pass filter Audio Recording and Analysis
  29. 29. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US VICFILTER VICFILTER is a tactical audio processor, designed to provide real-time analysis, filtering and enhancement tools for audio signals acquired via the sound card of the PC. The processed signal can be also recorded directly to disk. Its simple user interface and low MIPS requirements makes it ideal for those operational scenarios where only a small laptop can be used. It also allows to process previously recorded audio files stored on various memory support (HD, CD, DVD, USB key). VICFILTER’s tools allow to reduce the audio noise and improve speech intelligibility. The user interface gives a rapid and accurate access avoiding complex windows and menus. A comprehensive waveform visualiser is provided, allowing the operator to concentrate on areas where a vocal activity is visible. Audio analysis and filtering tools can be used to enhance the speech quality during the transcription process: - Frequency analysis - FFT manual filter - FFT tone filter - Broadband FFT filter - Low Shelf/High Pass filter - Fully Parametric/Band Pass filter - High Shelf/Low Pass filter
  30. 30. Stand-alone or Network based solutions tailor-made to specific signal inhibition requirements. Our jamming solutions adopt advanced technology capable of simultaneously blocking GSM 900, GSM 1800, UMTS, DECT,WiFi and Bluetooth devices. JAMMERS
  31. 31. Mobile Phones Jamm Box Jamm Box is a unit developed to inhibit GSM, DECT and UMTS frequencies in a fixed environment and in those applications where there is lack of installation space. It is equipped with four omnidirectional antennas and can be customised with different antennas on request. The unit can be remotely controlled: start/stop of the inhibition activity and output power increase/decrease. Jamm Box Plus Jamming system for 900/1800/2100 MHz 2400 to 2500 frequencies contained in an electrical box for easy installation. The antennas are placed in a separate box in order to increase installation flexibility. Both units are powered by 220V and are hidden in common electric gray boxes (230x310x130 mm). A prior analysis of the installation environment is necessary in order to identify the best configuration. Jamm Bag Jamming units contained in a rugged case. The device is manually activated and is able to jam 2G, 3G, Wifi and Bluetooth frequencies. It embeds a rechargeable battery pack that guarantees 2-3 hours operation and can be also powered from the mains power supply. Directional antennas are fitted in the upper part of the case and can be replaced by (optional) omnidirectional ones. 2G 3G BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US
  32. 32. POWER MANAGEMENT Remote Control Switch &TC SWITCH is a radio controller, small and ready to use, greatly useful to connect external devices and to control them remotely.Configurable via PC , it is easy to set up because it just has two connectors: one to connect the DC Power Supply (up to 15V), the other to connect external equipment. Using the remote control TC, it can turn ON or OFF the equipment connected to the output of receiver. The standard receiver can drive only one external equipment. It is possible, on request, to drive up to 3 independent channels: two with maximum load of 5 A and one with maximum load of 2 A. On demand, it could also be implemented with five digital I/O that can work as interface with external electronic equipment. The SWITCH’s LED gives an immediate feedback to the operator through small flashes.
  33. 33. CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it ABOUT US international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an NEW Power Supplies BEA power suppliers are featured by compactness and great versatility. The output tension is extremely stable and the devices are noiseless. They are provided with protection against overload and short circuits. The device are supplied in OEM version with a black heat-shrink sleeve or resin bonded. VIC560-A VIC560-A is an actuator that can be used to automatically reset a connected device, switching it off and on every six hours. Power Management Step-up Battery Step-up circuit able to use the non- rechargeable battery packs (ex LiSoCl2) that may not support the consumption peak when close to be discharged. PW940 PW990 PW6100 PW9500 V in 230 V ac (±10%) 230 V ac (±10%) 230 V ac (±10%) 230 V ac (±10%) 120 V ac (±10%) V out 9 V dc 9 V dc 6 V dc 9 V dc I out (n) 40 mA 90 mA 100 mA 400 mA (peaks 500 mA) dim. (mm) 36 x 12 x 10 36 x 17 x 12 33 x 17 x 13 48 x 19 x 17 PW12500 PW8300 PW1240 V in 230 V ac (±10%) 120 V ac (±10%) 230 V ac(+/-10%) 230 V ac(+/-10%) V out 12 V dc 8 V dc 12 V dc I out (n) 400 mA (peaks 500 mA) 300 mA 40 mA dimensions 48 x 19 x 17 mm 35 x 17 x 13 mm 36 x12 x10 mm
  34. 34. 3G based video transmission offering great installation flexibility and modularity. All-in-one system that can be easily integrated with all analogue cameras. Highly secure transmission thanks to the dynamic encrypting algorithm. VIDEO MONITORING The UMTS technology does not need connection to the lead line or big size antenna. The transmitter concealement is easy even in hostile environments. It is able to: transmit via 3G (GPRS, EDGE, UMTS, CDMA, HSDPA) on IP network, audio, video (4 CIF) up to 25 fps record video and/or snapshot of the images on a removable solid state memory card localize and store the GPS position in the memory, showing them on the video.
  35. 35. VSGAMMA3 VSGAMMA3 is a video transmitter operating on 3G Networks. It embeds a recorder and a GPS receiver. Thanks to the UMTS technology, it needs neither connection to a fixed line or large antennas and is therefore easy to conceal in hostile environments. The system transmits and records video data in H264 format, providing a far more efficient algorithm for compressing video than any other compression method available, giving best performances on 3G channel. Other codecs with higher definition and lower compression rates are also supported (MPEG4, MJPEG). Packet transmission on TCP/IP or streaming on RTSP are supported. RTSP permits higher frame rate whereas TCP/IP allows synchronised and buffered audio transmission. The bidirectional audio transmission can be configured in high or low quality (G711 and G723 audio compression) to either eavesdrop the environment or to remotely control devices via DTMF tones. When the UMTS coverage is not available, it records video data on its embedded memory card. The system can be activated by alarms generated by a video motion detection or triggered by an input. When an alarm is detected the unit sends a SMS alarm or an e-mail containing the first frame of the video caught. Transmission can be also programmed based on time setting. VSGamma3 has 2 inputs and one output to interact with external sensors. Pan-tilt- zoom and dome cameras supporting following protocols SONY VISCA, PELCO D, PELCO P, SAMSUNG, PHILIPS, VIDEOTEC, KARATEL can be managed by joystick or by user console. Available in two versions to connect one or up to four analogue cameras. Professional video recorder software for a complete top level IP recording system. The software allows remote visualisation of multiple sites and territorial areas. It can records from an unlimited number of connected clients. Multi-users and multi- monitors, it operates as HTTP server, Streaming server and Proxy video. It is available both in stand-alone and client/server versions. Managing Software BEA S.r.l. - Via Santorelli, 8 - 10095 Grugliasco (TO) - Italy Ph. +39.011.3285311 - Fax +39.011.3285312 - info@beanet.it CATEC/1110/11-WEEEregistrationnumberIT08020000003147 Theinformationgiveninthisdatasheetareindicativeonlyandsubjecttochangewithoutnotice.Nopartof thispublicationmaybereproduced,storedinaretrievalsystem,ortransmitted,inanyformorbyany means,electronic,mechanical,recording,orother,withoutthepriorwrittenpermissionofB.E.A.S.r.l. international partnership network able to complete the technology offer. The internal Production Department presence lets possible the complete creation and customization control, on the basis of customer needs and local laws. Punctuality and quality in finding the suitable solution are significant aspects of our operative philosophy which aims to satisfy customer needs. Key-points of the Company are the technology approach and the constant research for innovation, achieved thanks to our internal Research and Development department and an ABOUT US

×