Your SlideShare is downloading. ×
0
Range Weightanka Wireanka Accessanka
Weightanka/Wireanka/Accessanka <ul><li>Contents </li></ul><ul><li>Features common to all Kee Anchor® products </li></ul><u...
Weightanka/Wireanka/Accessanka Class E Deadweight Anchor Device  to EN 795:1996 ISO 14567  Deadweight Anchor System for us...
Weightanka/Wireanka/Accessanka <ul><li>Features </li></ul><ul><li>Will not move more than 1,000mm when arresting a fall  <...
Weightanka/Wireanka/Accessanka <ul><li>Base weights </li></ul><ul><li>Base weights fully encased in rubber </li></ul><ul><...
Weightanka/Wireanka/Accessanka <ul><li>Galvanised Counter weights </li></ul><ul><li>Each counterweight weighs 25kg and inc...
Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>EN795 requires all dead weight anchor devices to be pos...
Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>Roof Types-  Up to 5º Pitch </li></ul><ul><li>Concrete ...
Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>An exclusion zone should be established around the Anch...
Weightanka/Wireanka/Accessanka <ul><li>Limitations </li></ul><ul><li>Must be used with PPE that limits the MAF to 6kN </li...
Weightanka/Wireanka/Accessanka <ul><li>Fall Arrest fall distances </li></ul><ul><li>The clearance height below the feet of...
Weightanka/Wireanka/Accessanka <ul><li>Fall Restraint </li></ul><ul><li>Combination of anchor position and PPE supplied en...
Weightanka/Wireanka/Accessanka <ul><li>Cleaning/Storage </li></ul><ul><li>The assemblies should be kept clean, using deter...
Weightanka/Wireanka/Accessanka <ul><li>Before installation </li></ul><ul><li>It is strongly recommended that installers as...
Weightanka <ul><li>Class E Deadweight Anchor Device to </li></ul><ul><li>EN 795:1996 </li></ul><ul><li>ISO 14567  </li></u...
Weightanka <ul><li>Portable, Non Penetrative, Temporary or permanent solution </li></ul><ul><li>Ideal for Where Roof build...
Weightanka <ul><li>Number Of Users </li></ul><ul><li>Fall Arrest-  Single User  </li></ul><ul><li>Restraint-  Two Users </...
Weightanka <ul><li>Number of weights </li></ul><ul><li>250kg (Six Galvanised weights)  assembly for: </li></ul><ul><li>Asp...
Weightanka <ul><li>Assembly  </li></ul><ul><li>TOOLS REQUIRED FOR ASSEMBLY: </li></ul><ul><li>12mm A/F Hex Allen key </li>...
Weightanka Identification Labels #
Wireanka Deadweight Anchor System designed for use as Intermediate and Extremity Free-Standing Anchors  for  Class ‘C’ Hor...
<ul><li>A system of deadweight anchor devices designed to support EN795 Class C Horizontal flexible safety lines. </li></u...
<ul><li>Number of weights (Extremity anchors) </li></ul><ul><li>300 kg (Eight Galvanised weights)  assembly for: </li></ul...
<ul><li>Layout options </li></ul><ul><li>SINGLE EXTREMITY ANCHORS </li></ul><ul><li>Fall Arrest for a single user  </li></...
Wireanka TYPICAL LAYOUT-Single Extremity/Corner Anchor
<ul><li>Layout options </li></ul><ul><li>DOUBLE EXTREMITY/CORNER ANCHORS </li></ul><ul><li>Fall Arrest for 2 users in sepa...
Wireanka TYPICAL LAYOUT-Double Extremity/Corner Anchor   MAXIMUM OVERALL SYSTEM LENGTH 100m
Wireanka Double Extremity/Corner Anchor Connecting Kit
<ul><li>Horizontal Lifelines Components </li></ul><ul><li>End Fitting </li></ul>Wireanka Details of Swaging tool available...
<ul><li>Horizontal Lifelines Components </li></ul><ul><li>Corner Bracket </li></ul>Wireanka Intermediate Bracket
<ul><li>Horizontal Lifelines   </li></ul><ul><li>8mm Stainless Steel wire system </li></ul><ul><li>Cut wire to length </li...
Wireanka Edge distances and maximum spans FALL ARREST SYSTEMS FALL RESTRAINT Up to 10 m spans all systems have a minimum e...
<ul><li>Component parts </li></ul><ul><li>4- Rubber Weights </li></ul><ul><li>6,8,12 or 16 Galvanised Weights (depending o...
Wireanka Identification Labels #
Wireanka Identification Labels Calculation Software
<ul><li>Portable Deadweight System for Rope Access </li></ul><ul><li>Conforms to BS EN 795,  </li></ul><ul><li>& ISO 14567...
<ul><li>Features </li></ul><ul><li>Separate anchor points for working line and back up line </li></ul><ul><li>Internal for...
<ul><li>Features </li></ul><ul><li>Used with a 250kg Weightanka Assembly for any roof type up to 5º pitch </li></ul><ul><l...
<ul><li>Usage </li></ul><ul><li>Accessanka is an accessory to Weightanka and must always be used in combination with it. <...
Accessanka Usage Ensure both working and Backup lines are secured to BOTH eyebolts
<ul><li>Assembly </li></ul><ul><li>Assembly consists of screwing the Accessanka together using stainless steel M10 nuts an...
Accessanka Accessanka assembly
Accessanka Accessanka assembly
<ul><li>Accessanka placement </li></ul><ul><li>Horizontal rope guide must be positioned to allow the lines to hang free, w...
Accessanka DISTANCE FROM ROOF EDGE
Accessanka Identification Labels #
Weightanka/Wireanka/Accessanka <ul><li>Pre-use checks </li></ul><ul><li>Positioned as instructed in EN795 </li></ul><ul><l...
Weightanka/Wireanka/Accessanka <ul><li>Interim checks (in addition to pre-use checks) </li></ul><ul><li>After each week of...
Weightanka/Wireanka/Accessanka <ul><li>Thorough examination (Detailed examination)  </li></ul><ul><li>Weightanka/Wireanka ...
Weightanka/Wireanka/Accessanka Example of inspection record
Weightanka/Wireanka/Accessanka <ul><li>Supporting Documentation/ </li></ul><ul><li>More information </li></ul><ul><li>Iden...
Weightanka/Wireanka/Accessanka <ul><li>Questions </li></ul><ul><li>What’s the maximum distance a Weightanka/Wireanka is al...
Weightanka/Wireanka/Accessanka <ul><li>Questions </li></ul><ul><li>What are the maximum periods for detailed inspection/ce...
Weightanka/Wireanka/Accessanka <ul><li>Answers </li></ul><ul><li>What’s the maximum distance a Weightanka/Wireanka is allo...
Weightanka/Wireanka/Accessanka <ul><li>Answers </li></ul><ul><li>What is the maximum period for detailed inspection/certif...
Any questions?
Upcoming SlideShare
Loading in...5
×

Pp Kee Anchor 131108

546

Published on

A KeeAnka Training presentation

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
546
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
7
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Read through identification label info and summarise information already provided. When used on Steel cladding @ 15 degrees stress that it is important that this is only when working up the roof (i.e. over the ridge) and user training and method statement is essential.
  • Read through identification label info and summarise information already provided. When used on Steel cladding @ 15 degrees stress that it is important that this is only when working up the roof (i.e. over the ridge) and user training and method statement is essential.
  • Structural integrity should be assessed by qualified structural engineer. Stress loadings with double extremity anchors.
  • FALL RESTRAINT :Spans from 10m to 15m check with Kee Safety
  • Generally as Weightanka components. Wireanka features taller pedestal, tapped to suit wire system components e.g. Extremity eyebolts, Corner brackets and intermediate brackets Poly washer allows for correct orientation wire system component
  • Read through label summarising info on previous slides
  • Read through label summarising info on previous slides
  • Centre pedestal is replaced and uses different eyebolts
  • Read through labels to summarise info on previous slides
  • Transcript of "Pp Kee Anchor 131108"

    1. 1. Range Weightanka Wireanka Accessanka
    2. 2. Weightanka/Wireanka/Accessanka <ul><li>Contents </li></ul><ul><li>Features common to all Kee Anchor® products </li></ul><ul><li>Weightanka details </li></ul><ul><li>Wireanka details </li></ul><ul><li>Accessanka details </li></ul><ul><li>Inspection and Certification </li></ul><ul><li>Test </li></ul><ul><li>Any questions? </li></ul>
    3. 3. Weightanka/Wireanka/Accessanka Class E Deadweight Anchor Device to EN 795:1996 ISO 14567 Deadweight Anchor System for use as Intermediate and Extremity Anchors for Class ‘C’ Horizontal, Flexible Anchor Systems to EN 795:1996 Class B & E Portable Deadweight Anchor system for Rope Access to EN 795:1996, ISO 14567
    4. 4. Weightanka/Wireanka/Accessanka <ul><li>Features </li></ul><ul><li>Will not move more than 1,000mm when arresting a fall </li></ul><ul><li>For roofs with a pitch of up to 5 degrees </li></ul><ul><li>Suitable for wet or dry roof surface </li></ul><ul><li>Easy and quick assembly </li></ul><ul><li>Galvanised to BS EN ISO 1461 </li></ul>
    5. 5. Weightanka/Wireanka/Accessanka <ul><li>Base weights </li></ul><ul><li>Base weights fully encased in rubber </li></ul><ul><li>Rubber moulding means base weights aren’t prone to peeling </li></ul><ul><li>Unique design adds to performance. </li></ul><ul><li>Reduces thermal bridging </li></ul>
    6. 6. Weightanka/Wireanka/Accessanka <ul><li>Galvanised Counter weights </li></ul><ul><li>Each counterweight weighs 25kg and incorporate carrying handles </li></ul><ul><li>Different roof types require different Counterweight quantities </li></ul>
    7. 7. Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>EN795 requires all dead weight anchor devices to be positioned 2.5m from any roof edge, open void or fall hazard. </li></ul><ul><li>Do not position in areas where there is a risk of contamination or accumulation of water </li></ul><ul><li>Do not position where any system component could be affected by oil, grease or algae </li></ul><ul><li>Ice and snow must be cleared from base, do not use if risk of frost or in freezing conditions </li></ul><ul><li>On Gravel covered roofs, brush gravel to allow anchor bases direct contact with roof material </li></ul>
    8. 8. Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>Roof Types- Up to 5º Pitch </li></ul><ul><li>Concrete </li></ul>Asphalt Mineral Felt Stone chippings Single ply membrane (Smooth) Steel cladding Single ply membrane (Embossed)
    9. 9. Weightanka/Wireanka/Accessanka <ul><li>Placement </li></ul><ul><li>An exclusion zone should be established around the Anchors working area into which no one should be allowed unless connected to the Deadweight (or other appropriate anchor, if one exists). </li></ul><ul><li>The exclusion zone should be </li></ul><ul><li>designated by some form of </li></ul><ul><li>marking or barrier, </li></ul><ul><li>e.g. KEEMARK demarcation system. </li></ul>
    10. 10. Weightanka/Wireanka/Accessanka <ul><li>Limitations </li></ul><ul><li>Must be used with PPE that limits the MAF to 6kN </li></ul><ul><li>Do not use in high winds. </li></ul><ul><li>WEIGHTANKA Not suitable for supporting cable systems, Use WIREANKA </li></ul><ul><li>Roof structure suitability to be checked by structural engineer (especially with Wireanka) </li></ul>
    11. 11. Weightanka/Wireanka/Accessanka <ul><li>Fall Arrest fall distances </li></ul><ul><li>The clearance height below the feet of the user to the first obstacle in the path of a potential fall must be at least what is required by any PPE used in conjunction with the Weightanka system, plus 1m to allow for potential movement of the system itself. </li></ul><ul><li>N.B. Distance ‘D’ will be increased if Rope Adjuster or Retractable Lanyard used dependent on Manufacturers specification. </li></ul><ul><li>Be aware of factors reducing fall clearance e.g. cars, other buildings, forktrucks, pedestrians. Recommend cordoning off area below work area. </li></ul>E.g. where A= 5m, B= 2.5m, D= 5m–2.5m + 1m= 3.5m E= 1.75m F = 2m G = 1m Total fall clearance required = 8.25m
    12. 12. Weightanka/Wireanka/Accessanka <ul><li>Fall Restraint </li></ul><ul><li>Combination of anchor position and PPE supplied ensures no user is able to reach a position of 0.5m of any roof edge, roof open or other fall hazard </li></ul>
    13. 13. Weightanka/Wireanka/Accessanka <ul><li>Cleaning/Storage </li></ul><ul><li>The assemblies should be kept clean, using detergent if necessary, by wiping or hosing down with clean water and dried. </li></ul><ul><li>If disinfecting is deemed necessary please check with Kee Safety that disinfectant will not cause damage to equipment or PPE </li></ul><ul><li>Storage should be in a dry, chemically inert environment, away from sources of damage and stored in such a way that dismantled products will not become lost or misplaced. </li></ul><ul><li>Where the Weightanka has been left </li></ul><ul><li>in position an optional cover is available. </li></ul>
    14. 14. Weightanka/Wireanka/Accessanka <ul><li>Before installation </li></ul><ul><li>It is strongly recommended that installers assemble and disassemble one in a place of safety, away from the worksite, to familiarise themselves with: </li></ul><ul><li>the product </li></ul><ul><li>the assembly instructions </li></ul><ul><li>terms used to describe the various parts </li></ul><ul><li>the markings on the product. </li></ul>
    15. 15.
    16. 16. Weightanka <ul><li>Class E Deadweight Anchor Device to </li></ul><ul><li>EN 795:1996 </li></ul><ul><li>ISO 14567 </li></ul><ul><li>CE Certified to PPE </li></ul><ul><li>Directive </li></ul>
    17. 17. Weightanka <ul><li>Portable, Non Penetrative, Temporary or permanent solution </li></ul><ul><li>Ideal for Where Roof build up is unknown </li></ul><ul><li>No Roof Alterations required </li></ul><ul><li>Good for refurbishment projects </li></ul><ul><li>No part of the Weightanka weighs more than 25kg </li></ul><ul><li>Performance relies solely on it’s own mass, and the friction between itself and the roof surface. </li></ul>
    18. 18. Weightanka <ul><li>Number Of Users </li></ul><ul><li>Fall Arrest- Single User </li></ul><ul><li>Restraint- Two Users </li></ul><ul><li>Tell Kee Safety at time of purchasing </li></ul><ul><li>Supplied with 2 nd Eyebolt & Restraint PPE disc. </li></ul>
    19. 19. Weightanka <ul><li>Number of weights </li></ul><ul><li>250kg (Six Galvanised weights) assembly for: </li></ul><ul><li>Asphalt </li></ul><ul><li>Mineral Felt </li></ul><ul><li>Concrete </li></ul><ul><li>(Brushed) Stone chippings on Bitumen </li></ul><ul><li>300kg (Eight Galvanised weights) assembly for: </li></ul><ul><li>Single ply membrane (Smooth) </li></ul><ul><li>Steel cladding </li></ul><ul><li>(Brushed) Stone chippings on Mastic </li></ul><ul><li>400kg (Twelve Galvanised weights) assembly for: </li></ul><ul><li>Single ply membrane (Embossed) </li></ul><ul><li>For roofs of up to 5 º pitch </li></ul>
    20. 20. Weightanka <ul><li>Assembly </li></ul><ul><li>TOOLS REQUIRED FOR ASSEMBLY: </li></ul><ul><li>12mm A/F Hex Allen key </li></ul>#
    21. 21. Weightanka Identification Labels #
    22. 22.
    23. 23. Wireanka Deadweight Anchor System designed for use as Intermediate and Extremity Free-Standing Anchors for Class ‘C’ Horizontal, Flexible Anchor Systems to EN 795:1996 and BS 7883 CE Certified to PPE Directive
    24. 24. <ul><li>A system of deadweight anchor devices designed to support EN795 Class C Horizontal flexible safety lines. </li></ul><ul><li>For use on Flat roofs (less than 5º pitch), in temporary situations where it is preferable not to penetrate the roof. </li></ul><ul><li>Available Free Fall and edge distances sets system parameters </li></ul>Wireanka
    25. 25. <ul><li>Number of weights (Extremity anchors) </li></ul><ul><li>300 kg (Eight Galvanised weights) assembly for: </li></ul><ul><li>Asphalt </li></ul><ul><li>Mineral Felt </li></ul><ul><li>Concrete </li></ul><ul><li>(Brushed) Stone chipping </li></ul><ul><li>350kg (Ten Galvanised weights) assembly for: </li></ul><ul><li>Steel cladding </li></ul><ul><li>400kg (Twelve Galvanised weights) assembly for: </li></ul><ul><li>Single ply membrane (Smooth) </li></ul><ul><li>500kg (Sixteen Galvanised weights) assembly for: </li></ul><ul><li>Single ply membrane (Embossed) </li></ul><ul><li>For roofs of up to 5º pitch, N.B. Check structural suitability of roof </li></ul>Wireanka #
    26. 26. <ul><li>Layout options </li></ul><ul><li>SINGLE EXTREMITY ANCHORS </li></ul><ul><li>Fall Arrest for a single user </li></ul><ul><li>(with option of extra user if kept in restraint in a separate span) </li></ul><ul><li>-Or alternatively- </li></ul><ul><li>Fall Restraint for up to 3 users (maximum 2 users in a single span) </li></ul>Wireanka
    27. 27. Wireanka TYPICAL LAYOUT-Single Extremity/Corner Anchor
    28. 28. <ul><li>Layout options </li></ul><ul><li>DOUBLE EXTREMITY/CORNER ANCHORS </li></ul><ul><li>Fall Arrest for 2 users in separate spans (with option of 2 extra users per span if kept in restraint) </li></ul><ul><li>Double Extremity Anchors are joined by specially designed connection kits </li></ul><ul><li>Both layouts use single 250kg intermediate anchors (400kg on embossed single ply) </li></ul>Wireanka
    29. 29. Wireanka TYPICAL LAYOUT-Double Extremity/Corner Anchor MAXIMUM OVERALL SYSTEM LENGTH 100m
    30. 30. Wireanka Double Extremity/Corner Anchor Connecting Kit
    31. 31. <ul><li>Horizontal Lifelines Components </li></ul><ul><li>End Fitting </li></ul>Wireanka Details of Swaging tool available from Kee Safety
    32. 32. <ul><li>Horizontal Lifelines Components </li></ul><ul><li>Corner Bracket </li></ul>Wireanka Intermediate Bracket
    33. 33. <ul><li>Horizontal Lifelines </li></ul><ul><li>8mm Stainless Steel wire system </li></ul><ul><li>Cut wire to length </li></ul><ul><li>Slide through Intermediate/ Corner brackets </li></ul><ul><li>Swage end fittings and test (if line length known Kee Safety can factory swage ends). </li></ul><ul><li>Bolt Ends/Intermediates/Corners to Pedestals to 35 Nm </li></ul>Wireanka
    34. 34. Wireanka Edge distances and maximum spans FALL ARREST SYSTEMS FALL RESTRAINT Up to 10 m spans all systems have a minimum edge distance of 2.5m # 15M 12M 10M 8M 6M 5M MAX SPAN 7.2M 6.6M 6.2M 5.8M 5.4M 5.2M Min. Free Fall Distance 4.0M 4.0M 3.0M 3.0M 2.5M 2.5M Min. Edge Distance ALL SYSTEMS
    35. 35. <ul><li>Component parts </li></ul><ul><li>4- Rubber Weights </li></ul><ul><li>6,8,12 or 16 Galvanised Weights (depending on roof surface) </li></ul><ul><li>4- Locating Pins </li></ul><ul><li>4- ‘R’ Clips </li></ul><ul><li>2- Cross Arms </li></ul><ul><li>1- Stabiliser Arm </li></ul><ul><li>1- Pedestal, tapped M12 to accept wire system component </li></ul><ul><li>1- M20 Countersunk Socket Screw </li></ul><ul><li>1- Tommy Bar </li></ul><ul><li>1- PPE Disc (Fall Arrest or Restraint) </li></ul><ul><li>1- Polywasher </li></ul>Wireanka #
    36. 36. Wireanka Identification Labels #
    37. 37. Wireanka Identification Labels Calculation Software
    38. 38.
    39. 39. <ul><li>Portable Deadweight System for Rope Access </li></ul><ul><li>Conforms to BS EN 795, </li></ul><ul><li>& ISO 14567 class B&E </li></ul><ul><li>CE Approved to PPE Directive </li></ul><ul><li>Single user for Roped Access applications </li></ul><ul><li>Two users in a rescue situation </li></ul>Accessanka
    40. 40. <ul><li>Features </li></ul><ul><li>Separate anchor points for working line and back up line </li></ul><ul><li>Internal force balanced system allows the assembly to remain static, even when arresting the fall of both worker and rescuer </li></ul><ul><li>Requires no attachment to structural members </li></ul><ul><li>Easily moved across roof surface, removing need for multiple attachment points </li></ul><ul><li>Rope lines held away from edge of building reducing risk of abrasion </li></ul><ul><li>Provides full fall arrest protection before approaching edge </li></ul>Accessanka
    41. 41. <ul><li>Features </li></ul><ul><li>Used with a 250kg Weightanka Assembly for any roof type up to 5º pitch </li></ul><ul><li>Sold separately for use with existing Weightanka or as complete system </li></ul><ul><li>Aluminium, galvanised and rubber coated parts, requiring minimum maintenance </li></ul>Accessanka
    42. 42. <ul><li>Usage </li></ul><ul><li>Accessanka is an accessory to Weightanka and must always be used in combination with it. </li></ul><ul><li>This combination provides a mobile deadweight anchor device for use in rope access systems in accordance with: </li></ul><ul><ul><li>Industrial Rope Access Trade Association (IRATA) guidelines </li></ul></ul><ul><li>and/or: </li></ul><ul><ul><li>BS7985:2002 – Code of practice for the use of rope access methods for industrial purposes </li></ul></ul>Accessanka
    43. 43. Accessanka Usage Ensure both working and Backup lines are secured to BOTH eyebolts
    44. 44. <ul><li>Assembly </li></ul><ul><li>Assembly consists of screwing the Accessanka together using stainless steel M10 nuts and bolts </li></ul><ul><li>Each nut and bolt have thumb wheels for ease of assembly </li></ul><ul><li>Modular assembly, no part longer than 2m. </li></ul><ul><li>Complete assembly weighs 21kg </li></ul>Accessanka
    45. 45. Accessanka Accessanka assembly
    46. 46. Accessanka Accessanka assembly
    47. 47. <ul><li>Accessanka placement </li></ul><ul><li>Horizontal rope guide must be positioned to allow the lines to hang free, without them touching the edge of the roof or the side of the building below . </li></ul><ul><li>Centre of the Weightanka pedestal is positioned 3.3m from the roof edge. </li></ul><ul><li>Correct leg position is inside the parapet wall at the roof edge, approximately 260 mm from the vertical face of the building. </li></ul><ul><li>Adjust the position of Weightanka, if necessary, to achieve required position. </li></ul><ul><li>AND AT LEAST 2.5m AWAY FROM ANY OTHER ROOF EDGE, OPENING OR FALL HAZARD </li></ul>Accessanka
    48. 48. Accessanka DISTANCE FROM ROOF EDGE
    49. 49. Accessanka Identification Labels #
    50. 50.
    51. 51. Weightanka/Wireanka/Accessanka <ul><li>Pre-use checks </li></ul><ul><li>Positioned as instructed in EN795 </li></ul><ul><li>In case of fall, ensure fall will be unobstructed and sufficient distance is maintained </li></ul><ul><li>Base plates, suction cups in direct contact with roof surface </li></ul><ul><li>Correct number of weights used for roof type </li></ul><ul><li>Check locking pins </li></ul><ul><li>Roof is ≤ 5º </li></ul><ul><li>Means of connection (e.g. Lanyard) is not in contact with sharp edges </li></ul><ul><li>Surface is clear of oil, algae, ice, snow and standing water </li></ul><ul><li>Roof is structurally suitable and shows no sign of damage </li></ul><ul><li>Anchor or components shows no sign of damage </li></ul><ul><li>Threads and Eyebolt correctly tightened </li></ul><ul><li>SHOULD ANY DOUBT ARISE REMOVE FROM SERVICE </li></ul><ul><li>(Full details in Assembly & Operating Instructions ) </li></ul>
    52. 52. Weightanka/Wireanka/Accessanka <ul><li>Interim checks (in addition to pre-use checks) </li></ul><ul><li>After each week of constant use, every six weeks of intermittent use and on each occasion of re-assembly </li></ul><ul><li>Inspect for signs of corrosion, wear, distortion or other defects on all parts </li></ul><ul><li>Rubber base is fully bonded to steel and no damage to suction cups. Remove any algae. </li></ul><ul><li>Check the warning notices are intact and legible. </li></ul><ul><li>SHOULD ANY DOUBT ARISE REMOVE FROM SERVICE </li></ul><ul><li>(Full details in Assembly & Operating Instructions) </li></ul>
    53. 53. Weightanka/Wireanka/Accessanka <ul><li>Thorough examination (Detailed examination) </li></ul><ul><li>Weightanka/Wireanka to be carried out as a minimum annually </li></ul><ul><li>Accessanka six monthly (LOLER regulations) </li></ul><ul><li>Recorded on Record card </li></ul><ul><li>Carry out all checks as interim inspection, plus: </li></ul><ul><li>No wear or distortion of holes through which pins and bolts are passed </li></ul><ul><li>No deformation of pins or bolts or of their threads </li></ul><ul><li>No evidence that Weightanka/Wireanka has arrested fall e.g. scrape marks on roof, deformation of pedestal, cross arms, stabiliser, eyebolt etc. </li></ul><ul><li>(Accessanka only) Check for wear of the horizontal rope guides. If depth of groove greater than 1mm, outer beam should be returned for repair. </li></ul><ul><li>SHOULD ANY DOUBT ARISE- REMOVE FROM SERVICE </li></ul><ul><li>(Full details in Assembly & Operating Instructions ) </li></ul>
    54. 54. Weightanka/Wireanka/Accessanka Example of inspection record
    55. 55. Weightanka/Wireanka/Accessanka <ul><li>Supporting Documentation/ </li></ul><ul><li>More information </li></ul><ul><li>Identification labels </li></ul><ul><li>Assembly and operating instructions </li></ul><ul><li>Inspection records </li></ul><ul><li>Method statement/risk assessments (users responsibility) </li></ul><ul><li>Sales Literature </li></ul><ul><li>www.keesafety.com </li></ul>
    56. 56. Weightanka/Wireanka/Accessanka <ul><li>Questions </li></ul><ul><li>What’s the maximum distance a Weightanka/Wireanka is allowed to move in the event of arresting a fall? </li></ul><ul><li>What’s the maximum distance an Accessanka moves in the event of arresting a fall? </li></ul><ul><li>What’s the maximum roof pitch a Kee Anchor product can be used on? </li></ul><ul><li>What is the minimum edge distance a Kee Anchor product can be placed from a fall hazard? </li></ul><ul><li>What must be done to a gravel covered roof when placing a Kee Anchor product? </li></ul><ul><li>Where can the information on the correct weights for different roof types be found? </li></ul><ul><li>What will be supplied with a Weightanka should it be specified as ‘Fall Restraint’? </li></ul>
    57. 57. Weightanka/Wireanka/Accessanka <ul><li>Questions </li></ul><ul><li>What are the maximum periods for detailed inspection/certification for: WEIGHTANKA/WIREANKA </li></ul><ul><li>What are the maximum periods for detailed inspection/certification for: ACCESSANKA </li></ul><ul><li>A Wireanka system with single extremity anchors is for how many users for fall arrest? </li></ul><ul><li>What weight is the intermediate anchor for the Wireanka system for all roof types (except embossed single ply). </li></ul><ul><li>Name two things that differentiates the Weightanka from the Wireanka </li></ul><ul><li>How many users can an Accessanka accept? </li></ul><ul><li>What qualification must an Accessanka user possess? </li></ul>
    58. 58. Weightanka/Wireanka/Accessanka <ul><li>Answers </li></ul><ul><li>What’s the maximum distance a Weightanka/Wireanka is allowed to move in the event of arresting a fall? 1 metre </li></ul><ul><li>What’s the distance an Accessanka moves in the event of arresting a fall? It doesn’t move </li></ul><ul><li>What’s the maximum roof pitch a Kee Anchor product can be used on? 5 degrees </li></ul><ul><li>What is the minimum edge distance a Kee Anchor product can be placed from a fall hazard? 2.5m </li></ul><ul><li>What must be done to a gravel covered roof when placing a Kee Anchor product? Clear gravel, so rubber coated base plates are in direct contact with roof surface </li></ul><ul><li>Where can the information on the correct weights for different roof types be found? Identification labels, Assembly & Operations Instructions, Kee safety literature, Website </li></ul><ul><li>What will be supplied with a Weightanka should it be specified as ‘Fall Restraint’? An extra eyebolt and a Fall Restraint PPE disc </li></ul>
    59. 59. Weightanka/Wireanka/Accessanka <ul><li>Answers </li></ul><ul><li>What is the maximum period for detailed inspection/certification for: WEIGHTANKA/WIREANKA 12 months </li></ul><ul><li>What is the maximum period for detailed inspection/certification for: ACCESSANKA 6 months </li></ul><ul><li>A Wireanka system with single extremity anchors is for how many users for fall arrest? One </li></ul><ul><li>What weight is the intermediate anchor for the Wireanka system for all roof types (except embossed single ply). 250kg </li></ul><ul><li>Name two things that differentiates the Weightanka from the Wireanka Pedestal height & labels </li></ul><ul><li>How many users can an Accessanka accept? Two </li></ul><ul><li>What qualification must an Accessanka user possess? IRATA/FISAT/Qualified Rope Access Technician </li></ul>
    60. 60. Any questions?
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×