PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
Upgrade IOS Cisco Airon...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
2. Buka dengan aplikasi...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
4. Set Ip pada komputer...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
5. Buka Browser dan mas...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
7. Buka Menu Software U...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
10. Tunggu beberapa wak...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
11. Klik pilihan OK saa...
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
PT Nusa Network Prakarsa Dani Simanjuntak
Network Engineer
Upgrade IOS Cisco Aironet 1130AG Series
Upgrade Cisco IOS throu...
Upcoming SlideShare
Loading in …5
×

Upgrade IOS Cisco Aironet 1130AG Series Access Point

2,419 views

Published on

Upgrade IOS Cisco Aironet 1130AG Series Access Point

Published in: Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
2,419
On SlideShare
0
From Embeds
0
Number of Embeds
30
Actions
Shares
0
Downloads
11
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Upgrade IOS Cisco Aironet 1130AG Series Access Point

  1. 1. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series Upgrade IOS Cisco Aironet 1130AG Series Access Point File yang dipersiapkan: a. IOS versi c1130-k9w7-tar.123-8.JEA3 untuk AP , dapat didownload dari web resmi Cisco http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&soft wareid=284180979&release=12.4.25d- JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest atau dapat diunduh dari link berikut: https://drive.google.com/uc?id=0BwejreC54zdsSGh3aDV4eklOYzA&export=download b. Cable console untuk konfigurasi c. Cable UTP untuk koneksi tftp. Berikut adalah prosedur untuk upgrade IOS Cisco Aironet. 1. Sambungkan Wireless AP yang akan diupgrade dengan Serial Console ke computer.
  2. 2. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 2. Buka dengan aplikasi seperti putty, ketik “show version” untuk melihat versi IOS pada AP. 3. Set IP pada Interface BVI1 agar konfigurasi AP bisa diakses melalui web. Untuk cek Ip bisa dengan command “show ip interface brief”.
  3. 3. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 4. Set Ip pada komputer anda satu segment jaringan dengan IP pada interface BVI1, pada kasus ini ip BVI1 adalah 10.10.9.56.
  4. 4. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 5. Buka Browser dan masukkan ip dari AP. 6. Buka Menu System Software.
  5. 5. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 7. Buka Menu Software Upgrade, Pilih TFTP Upgrade. 8. Buka aplikasi TFTP untuk sharing file, sesuaikan IP dan nama file seperti pada gambar berikut. Kemudian Klik pilihan Upgrade. 9. Pilih Ok untuk konfirmasi.
  6. 6. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 10. Tunggu beberapa waktu hingga proses upgrade selesai.
  7. 7. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series 11. Klik pilihan OK saat proses upgrade selesai. 12. Cek kembali System Software saat IOS sudah selesai diupgrade.
  8. 8. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series
  9. 9. PT Nusa Network Prakarsa Dani Simanjuntak Network Engineer Upgrade IOS Cisco Aironet 1130AG Series Upgrade Cisco IOS through the CLI This section describes how to upgrade Cisco IOS on an access point through the CLI. 1. Log into the access point through a Telnet session. 2. You can download a new image file and choose to replace the current image or keep the current image. Note: Refer to Cisco Software Downloads FAQ for information on how to download firmware from Cisco.com Downloads. Note: The latter option is helpful when one of the Cisco IOS files are corrupted. You can work with the access point from the other image in the flash. 3. If you choose to overwrite the existing file, issue the archive download-sw /overwrite /reload tftp://location/image-namecommand. The /overwrite option overwrites the software image in flash with the downloaded image. The /reload option reloads the system after you download the image unless the configuration is changed and not saved. For //location, specify the IP address of the TFTP server. For image name, specify the Cisco IOS filename that you plan to use to upgrade the access point. In this example, the command is archive download-sw /overwrite /reload tftp://10.77.244.194/c1240-k9w7-tar.124-10b.JA3.tar. As mentioned earlier, do not change the name of the Cisco IOS file. Leave it as the default. You find these logs during the successful file transfer: examining image... Loading c1240-k9w7-tar.124-10b.JA3.tar from 10.77.244.196 (via BVI1): ! extracting info (275 bytes) Image info: Version Suffix: k9w7-.124-10b.JA3 Image Name: c1240-k9w7-mx.124-10b.JA3 Version Directory: c1240-k9w7-mx.124-10b.JA3 Ios Image Size: 4813312 Total Image Size: 5560832 Image Feature: UNKNOWN Image Family: C1240 Wireless Switch Management Version: 1.0 Extracting files... c1240-k9w7-mx.124-10b.JA3/ (directory) 0 (bytes) c1240-k9w7-mx.124-10b.JA3/html/ (directory) 0 (bytes) c1240-k9w7-mx.124-10b.JA3/html/level/ (directory) 0 (bytes) -----------------Lines omitted --------------------------- ---------------------------------------------------------- Deleting target version: flash:/c1240-k9w7-mx.124-10b.JA3...done. New software image installed in flash:/c1240-k9w7-mx.124-10b.JA3. Configuring system to use new image...done. Requested system reload in progress... 4. If you choose to keep the existing file, issue the archive download-sw /leave-old-sw /reload tftp://location/image-namecommand. If there is not enough space to install the new image and keep the current running image, the download process stops, and an error message is displayed. 5. The AP downloads the Cisco IOS file specified from the DHCP server and reloads with the new software.

×