2. Prepared By : Mazadul Hasan sheshir
ID: 2010000400008
13th
Batch (session 2009-2013)
Department : Wet Processing Technology
Email: mazadulhasan@yahoo.com
Blog : www. Textilelab.blogspot.com (visit)
Southeast University
Department Of Textile Engineering
I/A 251,252 Tejgaon Dhaka Bangladesh
Prepared By :
4. The single jersey cylinder knitting
machine is one of the modern
machine. It has one set of needle
and another set sinker. But needle
and sinkers have different cam
system. Cam system is stationery
and the cylinder with needles and
sinkers are movable. The yarn
feeder is over the m/c and
stationary. The machine is negative
feed system and has electric
autostopper.
Introduction
10. LATCH NEEDLELATCH NEEDLE
hook portion at the top and a latch rivetedhook portion at the top and a latch riveted
sliding movements in individual grooves called trickssliding movements in individual grooves called tricks
The latch needles are self actingThe latch needles are self acting
Form loop by opened and closed hookForm loop by opened and closed hook
11. CAMCAM
Provide needle path arrangementProvide needle path arrangement
Stationary metal cam platesStationary metal cam plates
Help to make loopHelp to make loop
12. SINKERSINKER
Move tro and fro between adjoining needlesMove tro and fro between adjoining needles
Thin metal plateThin metal plate
It perform following functions
Loop perform
Holding down
Knocking over
It perform following functions
Loop perform
Holding down
Knocking over
13. CYLINDERCYLINDER
Steel circular bed having tricksSteel circular bed having tricks
The needles move up & down
with reference to tricks
The needles move up & down
with reference to tricks
Maximum cylinder diameter is
75 cm
Maximum cylinder diameter is
75 cm
Cylinder diameter based on
fabric width
Cylinder diameter based on
fabric width
14. Carry the yarn to the knitting zoneCarry the yarn to the knitting zone
Over head or side stationay standOver head or side stationay stand
Contain the conesContain the cones
Negative feedingNegative feeding
Creel
15. Motor Speed = 1400 RPM
Motor pulley = 8.5 inches
Small motor pulley = 2 inches
Machine Pulley = 4 inches
Cylinder gear teeth = 315 T
Vivel gear teeth = 25 T
Motor Speed = 1400 RPM
Motor pulley = 8.5 inches
Small motor pulley = 2 inches
Machine Pulley = 4 inches
Cylinder gear teeth = 315 T
Vivel gear teeth = 25 T
GEARING DIAGRAM
16. Yarn comes from
the creel
Yarn comes from
the creel
Passes through the
ring type yarn path
Passes through the
ring type yarn path
It faces feeder and
auto stopper
It faces feeder and
auto stopper
Finally threaded
to needle by
guide
Finally threaded
to needle by
guide
YARN PATH DIAGRAM
25. The single jersey machine is a plain fabric producer. At our Fabric
Manufacturing Technology Lab we come in contact with the single jersey
machine. Though the machine has some inefficiency, we tried to get the
fundamental idea about Single Jersey Machine.
CONCLUSION
26.
27.
28.
29. 1. Yarn Manufacturing Technology
Link : http://www.facebook.com/pages/Yarn-Manufacturing-
Technology/485014954866808
2. Fabric Manufacturing Technology
Link : http://www.facebook.com/pages/Fabric-Manufacturing-
Technology/459520217425605
3. Garments Manufacturing Technology
Link : http://www.facebook.com/pages/Garments-Manufacturing-
Technology/472364799463126
3. Wet processing Technology
Link : http://www.facebook.com/pages/Wet-Processing-Technology-
Dyeing-/468645219825404
4. Fashion-Design-and-Technology
Link : http://www.facebook.com/pages/Fashion-Design-and-
Technology/587655294583875?ref=ts&fref=ts
My Facebook Textile related Pages
http://www.textilelab.blogspot.com (Visit )
