1. WRENCHES
WRENCHES1651-0852
Wide Flat Jaw Multi-Grip Pliers
• Clamps lap joints allowing four consecutive
spot welds without tool removal
• Spot welding, Auto-body repair work, Steel fabrication
• Jaw-CR-MO Steel, Body: Carbon steel with heat-treated
1653-0852
1652-0852
Double Curved Jaw Multi-Grip Pliers
Double Hooked Jaw Multi-Grip Pliers
• Clamps two flanged lapped or adjacent joints
• Auto-body repair, Steel fabrication
• Jaw-CR-MO steel, Body-Iron with heat-treated
• Clamps two flanged lapped or adjacent joints
• Auto-body repair, Steel fabrication
• Jaw-CR-MO steel, Body-Iron with heat-treated
MULTI-GRIP PLIERS
2000-12
CodeCode
560
g
L
mm
200
capacity
max(mm)
2300-10
CodeCode
560
g
L
mm
230
capacity
max(mm)
2150-10
CodeCode
515
g
L
mm
215
capacity
max(mm)
1655-0852
Straight Jaw Multi-Grip Pliers
1654-0852
Angled Jaw Multi-Grip Pliers
• Clamps lap joints allowing for consecutive
spot welds without tool removal
• Spot welding, Auto-body repair work, Steel fabrication
• Jaw-CR-MO Steel, Body-iron with heat-treated
• Push bottom release-Easy and efficient
one-hand releasing
• Jaw-CR-MO Steel, Body-iron with heat-treated
1950-18
CodeCode
450
g
L
mm
195
capacity
max(mm)
2100-15
CodeCode
465
g
L
mm
210
capacity
max(mm)
4
164
165
5
165 - 182
2. WRENCHES Torque and Fatigue testerTorque Strength 70%
Higher than DIN standard
OPEN END RING END
0
200
400
600
800
1000
1200
1400
1600
7mm 10mm 13mm 16mm 19mm 22mm 25mm 28mm 32mm
DIN 899 A Whirlpower
0º 15º 45º 75º
Europe type
(Thin Wall)Different angles for better operation
7mm 10mm 13mm 16mm 19mm 22mm 25mm 28mm 32mm
DIN 899 B Whirlpower
Torque Test - OPEN END
Mulit-Functional system can be applied to different types of bolts and fasteners.
SPLINE SQUARETORKS12 Point6 Point 6 Point
SAE mm
DUO-ACTION RATCHET
WRENCH
TWO ENDS + TWO DIRECTIONS
● More efficient and easier to use than traditional wrenches,
saves up to 40%+ operation time.
● Suitable for working in limited space.
● More turning angle up to 35 degree.
▲ POWERFUL
Four contact points to increase torque transmission with even
distribution to fastener without causing damage.
▲ EFFICIENT
Next turn repositioning without removing or lifting the wrench.
1242-8
5
166
167