Sectional Steel Door Systems

426 views
354 views

Published on

0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
426
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
6
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Sectional Steel Door Systems

  1. 1. STEEL DOORS 416 420 424 430Product Line INSULATED STEEL DOORS 418 422 426 432 INDUSTRY LEADING COMMERCIAL & INDUSTRIAL SOLUTIONS
  2. 2. Sectional Steel Door Selection – A Solid Choice for Reliability and DurabilityTHE TURNKEY SOURCE FOR COMMERCIAL AND INDUSTRIAL SOLUTIONS AND SERVICESelection of Overhead Door products automatically includes the unequaled expertise and experience ofOverhead Door Ribbon Distributors. Nationwide coverage by our 400+ Ribbon Distributors is unique in ourindustry – providing a single source for design and application consulting, installation, service and ongoing main-tenance. Turnkey services to maximize the lasting value of your product choice. Your Overhead Door Distributoris also your only source for a full line of commercial and industrial door and operator systems specifically designed for integrated applications. For over four generations, our 400+ Ribbon Distributors have been committed to providing commercial and industrial door solu- tions. Combined with Overhead Door product design and manufacturing superiority, our distributors are a proud part of the Overhead Door family, sharing our name, our Ribbon logo and our commitment to industry leading innovation and excellence.CONTENTSIntro to Sectional Steel and Insulated Extra Heavy-Duty Insulated SectionalSectional Steel 2 -3 Steel Doors–Series 418 12-13Sectional Steel and Insulated Heavy-Duty Insulated SectionalSectional Steel Comparison Chart 4 -5 Steel Doors–Series 422 426 14-15Extra Heavy-Duty Sectional Steel Doors Medium-Duty Insulated SectionalSeries 416 6 -7 Steel Doors–Series 432 16 -17Heavy-Duty Sectional Steel Doors Track Detail 18Series 420 424 8-9 Framing & Pads Detail 19Medium-Duty Sectional Steel DoorsSeries 430 10 -11 Electric Operators 20-211-800-887-DOOR
  3. 3. Sectional SteelDoor SystemsOverhead Door Corporation’s comprehensive line of sectional steel and insulated steel doorsencompasses one of the industry’s most complete selection of panel profiles, gauges, track stylesand hardware for commercial sectional door systems. Our sectional steel door systems aredesigned to satisfy the spectrum of opening sizes, field conditions and aesthetic requirements fora host of commercial and industrial applications, including applications requiring thermal perform-ance. The insulated steel doors provide R-values up to 11.69 (2.06 W/Msq) to meet variousinsulating requirements. Engineered and manufactured for excellence, and backed by the best servicecompany and dedicated distributor network in the industry, Overhead Door Corporation’s sectionalsteel doors are an outstanding choice for durability, serviceability and long-lived performance. Installation and Service: Overhead Door Company of Madison overhead door corporation 1
  4. 4. Sectional Steel and Insulated Steel Doors Overhead Door Corporation offers a wide • Option of insulated steel doors provides enhanced thermal selection of sectional steel and insulated steel efficiency and R-values up to 11.69 (2.06 W/Msq)* doors to satisfy applications where durability, • Baked-on, polyester paint finish eliminates field painting and provides long-lasting protection against the elements reliability and economy are top priorities. An • Superior panel strength and well-engineered track design array of door panel profiles, tracks and hard- meets windload requirements and codes ware, and specialized options allows you to Specialized Options for Customized Solutions further customize these doors to your specific • Full-section or individual-panel glazing satisfies requirements project requirements. for external light and visitor identification • Higher-cycle springs in optional 25k, 50k, 75k or 100k-cycles promote long-life in high-usage applications GENERAL FEATURES AND BENEFITS • Optional steel strutting provides reinforcement for structural Solidly Constructed for Reliable Performance integrity on wider doors • Other options include: electric and chain hoist operation, • 16, 20, or 24-gauge steel door panels results in a solidly aluminum sash sections with choice of DSB, plexiglas, constructed door for years of dependable service polycarbonate, tempered, or wire glazing, as well as movable • Standard steel doors available in sizes up to 322" (9804 mm) center posts, 3" (76 mm) track , Sup-UR-Seal jamb seals in width and 241" (7336 mm) in height • Insulated steel doors available in up to 322" (9804 mm) in Built to Last width and 241" (7336 mm) in height • Top-quality materials, excellent field service and optional • Heavy-duty track and hardware are fabricated of high-quality maintenance program contribute to extended door life, galvanized steel and engineered for precise, trouble-free low maintenance costs and maximum productivity performance * If a higher R-value is required, ask your Overhead Door Distributor about the Thermacore ® • Flexible PVC bottom weatherseal with retainer lessens Door System. conductivity of heat and cold, minimizes air and water penetration, and accommodates irregular floor conditions Steel Doors Insulated Steel Doors Panel Detail Panel Detail 416 Series 420 424 430 Series 418 Series 422 426 432 Series2
  5. 5. Sectional SteelDoor Systems Installation and Service: Overhead Door Company of Dallas-Commercial overhead door corporation 3
  6. 6. Sectional Steel Door Selection Chart4
  7. 7. Sectional SteelDoor Systems overhead door corporation 5
  8. 8. Extra Heavy– Duty Sectional Steel Doors SERIES 416 Standard Features At a Glance The 416 Series is manufactured of 16-gauge, flush, galvanized steel exterior for enhanced Nominal thickness 2" (51 mm) strength and durability. These 2" (51 mm) Maximum standard width 322" (9804 mm) thick doors are available in sizes up to Maximum standard height 211" (6426 mm) Exterior steel 16-gauge hot-dipped 322" in width and 211" in height (9804 galvanized steel mm and 6426 mm). Available with an array Exterior surface Flush of options, the 416 Series can be easily End stiles 16-gauge steel customized to meet any project require- Center stiles 16-gauge steel ment where an extra-heavy-duty door is Standard mounting Angle mount required. Standard track 2" (51 mm) Standard springs 10,000 cycle Weatherstripping Flexible PVC bottom with retainer ARCHITECTURAL SPECIFICATIONS* 416 Operation Manual pull rope Finish White baked-on PART 1 GENERAL polyester 1.01 Work Included Lock Interior-mounted The doors will be 416 Series as manufactured by slide lock Overhead Door Corporation. Options 1.02 Related Work Opening preparation, miscellaneous or structural metal • Electric operator or chain hoist work, access panels, finish or field painting, field electri- • Bottom sensing edge cal wiring, wire, conduit, fuses and disconnect switches • Full sash section with 1/8" (3 mm) DSB, insulated; are in the Scope of Work of other divisions or trades. 1/8" (3 mm) and 1/4" (6 mm) plexiglass • Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm) 1.03 Quality Assurance and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4" In accordance with accepted quality assurance guidelines (6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm) for motor-operated doors, both the door and electric Tempered; 1/4" (6 mm) wired operator (optional) shall be manufactured by a single- • 3" (76 mm) track source producer of door systems; as by Overhead Door • Bracket mounting (not available on full vertical Corporation. door tracks) • Bottom sensing edge PART 2 PRODUCT • Higher-cycle springs in 25k, 50k, 75k, 100k cycles • Exhaust ports 2.01 Sections • Jamb weatherseals, Saverseal pliable blade seal and Section profile will be flush. Sections will be 16-gauge, Therma-Flex seal roll-formed galvanized steel exterior. Sections will have a • Bottom strips, including looped PVC weatherstrips, nominal thickness of 2" (51 mm). Doors will have rabbet- flexible PVC astragal weatherstrips and double- ed meeting rails to form weathertight joints and provide contact weatherstrips full-width interlocking structural rigidity. • Reinforcing struts of roll-formed steel hat sections 2.02 Center and End Stiles • Movable center posts for 2" (51 mm) or 3" (76 mm) tracks that roll away, with automatic safety Center and end stiles will be 16-gauge steel, formed and catches that prevent door closure when posts are fastened as integral structures with the rolled sections. removed End stiles will be channel-shaped to 2" (51 mm) deep. • Tumbler keyed lock 2.03 Springs Standard springs will be 10,000 cycles. (Optional higher- cycle 25,000, 50,000, 75,000, or 100,000-cycle springs).6
  9. 9. Sectional SteelDoor Systems SERIES 4162.04 Hardware Panel Schedule Section ScheduleHinges and fixtures will be galvanized steel. Full-floating ball-bearing rollers will have hardened steel races. Roller sizes will Door Width Number Door Height Number of of Panels Sectionsbe adequate for design requirements and limitations. to 102" 61" to 71" (3099 mm) 2 (1854 mm to 3937 mm) 42.05 Track 103" to 122" 72" to 810"Track is 2" (51 mm) standard (3" (76 mm) optional) angle- (3124 mm to 3708 mm) 3 (2184 mm to 2692 mm) 5mounted. (Bracket-mounted track is an option, but not avail- 123" to 162" 4 811" to 107" 6 (3734 mm to 4928 mm) (2718 mm to 3226 mm)able on full vertical doors). 163" to 192" 108" to 124" (4953 mm to 5842 mm) 5 (3251 mm to 3759 mm) 72.06 Lock 193" to 222" 125" to 141" (5867 mm to 6756 mm) 6 (3785 mm to 4293 mm) 8Lock will be interior-mounted slide lock. (Optional tumblerkeyed lock is available.) 223" to 262" 142" to 1510" (6782 mm to 7976 mm) 8 (3438 mm to 4826 mm) 9 263" to 322" 1511" to 177"2.07 Weatherstrip (8001 mm to 9804 mm) 10 (4851 mm to 5359 mm) 10Bottom weatherstrip will be flexible PVC and held in place by 178" to 211" 11 (5385 mm to 6426 mm)a retainer that also provides additional reinforcement.2.08 FinishFinish will be factory baked-on white polyester coating.2.09 OperationOperation will be by manual pull rope. (Optional chain hoistand electric operator are available.)PART 3 EXECUTION3.01 ExecutionInstall the doors in accordance with Overhead DoorCorporation instructions and standards, using an authorizedOverhead Door Corporation distributor.*Note to specifier: This specification is a suggested guide. Available options are shown inparentheses. overhead door corporation 7
  10. 10. Heavy– Duty Sectional Steel Doors SERIES 420 424 Standard Features At a Glance The 420 and 424 Series doors are designed for heavy-duty use in a variety of commer- Nominal thickness 2" (51 mm) cial and industrial applications. Both series Maximum standard width 312" (9500 mm) (420 Series) feature a 2" (51 mm) panel thickness, 16- 302" (9195 mm) (424 Series) Maximum standard height 241" (7341 mm) gauge steel intermediate and end stiles, Exterior steel 20-gauge galvanized steel ribbed steel exterior and a white paint (420 Series) finish. The 420 Series is a 20-gauge steel 24-gauge galvanized steel door available in sizes up to 312" in width (424 Series) and 241" in height (9500 mm and 7341 Exterior surface Ribbed mm). The 424 Series is available in sizes up End stiles 16-gauge steel Center stiles 16-gauge steel to 302" in width and 241" in height (9195 Standard mounting Angle mount mm and 7341 mm), and is also available in Standard track 2" (51 mm) Industrial brown. Numerous options — Standard springs 10,000 cycle including weatherstripping, reinforcing Weatherstripping Flexible PVC bottom struts, movable center posts, and motor with retainer operation — allow these heavy-duty doors Operation Manual pull rope Finish White baked-on polyester to meet nearly any project requirement. Lock Interior-mounted slide lock ARCHITECTURAL SPECIFICATIONS* 420 424 Options PART 1 GENERAL • Electric operator or chain hoist • Bottom sensing edge 1.01 Work Included • Full sash section with 1/8" (3 mm) DSB, insulated; The doors will be 420 or 424 Series as manufactured 1/8" (3 mm) and 1/4" (6 mm) plexiglass by Overhead Door Corporation. • Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm) 1.02 Related Work and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4" Opening preparation, miscellaneous or structural metal (6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm) work, access panels, finish or field painting, field electri- Tempered; 1/4" (6 mm) wired cal wiring, wire, conduit, fuses and disconnect switches • 3" (76 mm) track are in the Scope of Work of other divisions or trades. • Bracket mounting (not available on full vertical) • Higher-cycle springs in 25k, 50k, 75k, 100k cycles 1.03 Quality Assurance • Exhaust ports In accordance with accepted quality assurance guidelines • Jamb weatherseals, Saverseal pliable blade seal and for motor-operated doors, both the door and electric Therma-Flex seal operator (optional) shall be manufactured by a single- • Bottom strips, including looped PVC weatherstrips, source producer of door systems; as by Overhead Door flexible PVC astragal weatherstrips and double-contact Corporation. weatherstrips • Reinforcing struts of roll-formed steel slat sections PART 2 PRODUCT • Industrial brown polyester (424 Series only) • Movable center posts for 2" (51 mm) or 3" (76 mm) tracks 2.01 Sections that roll away, with automatic safety catches that Section profile will be ribbed. Sections will be 20-gauge prevent door closure when posts are removed for 420 Series or 24-gauge for the 424 Series, roll-formed • Tumbler keyed lock galvanized steel exterior. Sections will have a nominal thickness of 2" (51 mm). Doors will have rabbeted meet- ing rails to form weathertight joints and provide full-width interlocking structural rigidity.8
  11. 11. Sectional SteelDoor Systems SERIES 420 4242.02 Center and End Stiles Panel Schedule Section ScheduleCenter and end stiles will be 16-gauge steel, formed and fas-tened as integral structures with the rolled sections. End stiles Door Width Number Door Height Number of of Panels Sectionswill be channel-shaped to 2" (51 mm) deep. to 102" to 81" (3099 mm) 2 (2464 mm) 42.03 Springs 103" to 122" 82" to 101"Standard springs will be 10,000 cycles. (Optional higher-cycle (3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 525,000, 50,000, 75,000, or 100,000-cycle springs). 123" to 162" 102" to 121" (3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 62.04 Hardware 163" to 192" 122" to 141" (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7Hinges and fixtures will be galvanized steel. Full-floating ball- 193" to 222" 142" to 161" (5867 mm to 6756 mm) 6 (4318 mm to 4902 mm) 8bearing rollers will have hardened steel races. Roller sizes willbe adequate for design requirements and limitations. 223" to 262" 162" to 181" (6782 mm to 7976 mm) 8 (4928 mm to 5512 mm) 9 263" to 312"* 182" to 201"2.05 Track (8001 mm to 9804 mm) 10 (5537 mm to 6121 mm) 10Track is 2" (51 mm) standard (3" (76 mm) optional) angle- 263" to 302"** 10 202" to 221" 11 (8001 mm to 9195 mm) (6147 mm to 6731 mm)mounted. (Bracket-mounted track is an option, but not avail- 222" to 241"**able on full vertical doors). (6756 mm to 7341 mm) 122.06 Lock *420 Series **424SeriesLock will be interior-mounted slide lock. (Optional tumblerkeyed lock is available.)2.07 WeatherstripBottom weatherstrip will be flexible PVC and held in place bya retainer that also provides additional reinforcement.2.08 FinishFinish will be factory baked-on white (Industrial brownoptional on 424 Series) polyester coating.2.09 OperationOperation will be by manual pull rope. (Optional chain hoistand electric operator are available.)PART 3 EXECUTION3.01 ExecutionInstall the doors in accordance with Overhead DoorCorporation instructions and standards, using an authorizedOverhead Door Corporation distributor.*Note to specifier: This specification is a suggested guide. Available options are shown inparentheses. overhead door corporation 9
  12. 12. Medium – Duty Sectional Steel Doors SERIES 430 Standard Features At a Glance The 430 Series sectional steel door in available in sizes up to 202" in width and Nominal thickness 2" (51 mm) 161" in height (6147 mm and 4902 mm) Maximum standard width 202" (6147 mm) for a variety of medium-duty applications. Maximum standard height 161" (4902 mm) Exterior steel Nominal 24-gauge These doors features a 2" (51 mm) panel galvanized steel thickness and a nominal 24-gauge, ribbed, Exterior surface Ribbed white galvanized steel exterior with 16- End stiles 16-gauge steel gauge steel intermediate and end stiles. Center stiles 16-gauge steel (Industrial brown is available) The 430 Standard mounting Angle mount Series is customizable to any project speci- Standard track 2" (51 mm) Standard springs 10,000 cycle fication with a variety of additionally avail- Weatherstripping Standard on bottom able options. Operation Manual pull rope Finish White baked-on polyester Lock Interior-mounted slide ARCHITECTURAL SPECIFICATIONS* 430 lock PART 1 GENERAL Options 1.01 Work Included • Electric operator or chain hoist The doors will be 430 Series as manufactured by • Full sash section with 1/8" (3 mm) DSB, insulated; Overhead Door Corporation. 1/8" (3 mm) and 1/4" (6 mm) plexiglass 1.02 Related Work • Individual lites with 1/8" (3 mm) DSB; 1/8" (3 mm) and 1/4" (6 mm) plexiglass; 1/8" (3 mm) and 1/4" Opening preparation, miscellaneous or structural metal (6 mm) Lexan; 1/8" (3 mm) and 1/4" (6 mm) work, access panels, finish or field painting, field electri- Tempered; 1/4" (6 mm) wired cal wiring, wire, conduit, fuses and disconnect switches • Industrial brown polyester are in the Scope of Work of other divisions or trades. • 3" (76 mm) track 1.03 Quality Assurance • Bracket mounting (not available on full vertical) In accordance with accepted quality assurance guidelines • Bottom sensing edge for motor-operated doors, both the door and electric • Higher-cycle springs in 25k, 50k, 75k, 100k cycles operator (optional) shall be manufactured by a single- • Exhaust ports source producer of door systems; as by Overhead Door • Jamb weatherseals, Saverseal pliable blade seal and Corporation. Therma-Flex seal • Bottom strips, including looped PVC weatherstrips, PART 2 PRODUCT flexible PVC astragal weatherstrips and double-contact weatherstrips 2.01 Sections • Reinforcing struts of roll-formed steel hat sections Section profile will be ribbed. Sections will be nominal 24- • Movable center posts for 2" (51 mm) or 3" (76 mm) gauge, roll-formed galvanized steel exterior. Sections will tracks that roll away, with automatic safety catches have a nominal thickness of 2" (51 mm). Doors will have that prevent door closure when posts are removed rabbeted meeting rails to form weathertight joints and • Tumbler keyed lock provide full-width interlocking structural rigidity. 2.02 Center and End Stiles Center and end stiles will be 16-gauge steel, formed and fastened as integral structures with the rolled sections. End stiles will be channel-shaped to 2" (51 mm) deep. 2.03 Springs Standard springs will be 10,000 cycles. (Optional higher- cycle 25,000, 50,000, 75,000, or 100,000-cycle springs).10
  13. 13. Sectional SteelDoor Systems SERIES 4302.04 Hardware PART 3 EXECUTIONHinges and fixtures will be galvanized steel. Full-floating ball- 3.01 Executionbearing rollers will have hardened steel races. Roller sizes willbe adequate for design requirements and limitations. Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized2.05 Track Overhead Door Corporation distributor.Track is 2" (51 mm) standard (3" (76 mm) optional) angle- *Note to specifier: This specification is a suggested guide. Available options are shown inmounted. (Bracket-mounted track is an option, but not avail- parentheses.able on full vertical doors).2.06 LockLock will be interior-mounted slide lock. (Optional tumbler Panel Schedule Section Schedulekeyed lock is available.) Door Width Number Door Height Number of of Panels Sections2.07 WeatherstripBottom weatherstrip will be flexible PVC and held in place by 80"to 102" to 81" (2438 mm to 3099 mm) 2 (2464 mm) 4a retainer that also provides additional reinforcement. 103" to 122" 82" to 101" (3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 52.08 Finish 123" to 162" 102" to 121" (3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6Finish will be factory baked-on white (Industrial brown 163" to 192" 122" to 141"option) polyester. (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7 193" to 202" 142" to 161" (5867 mm to 6147 mm) 6 (4318 mm to 4902 mm) 82.09 OperationOperation will be by manual pull rope. (Optional chain hoistand electric operator are available.) overhead door corporation 11
  14. 14. Extra Heavy– Duty Insulated Sectional Steel Doors SERIES 418 Standard Features At a Glance The 418 Series is a high-quality, heavy-duty insulated door that provides protection Nominal thickness 2" (51 mm) against heat and cold environments. Maximum standard width 322" (9804 mm) Maximum standard height 211" (6426 mm) Fabricated of 16-gauge, flush galvanized Exterior steel 16-gauge galvanized steel exterior and 26-gauge steel back steel cover, these 2" (51 mm) thick doors offer Back cover 26-gauge galvanized the choice of expanded polystyrene or steel (poly-backed, HIPS- backed optional) isocyanurate insulation for R-value’s up to Insulation Expanded polystyrene 11.69 (2.06 W/Msq). A wide array of (standard) options allows these doors to meet the Isocyanurate (optional) R-value most stringent project requirements that Polystyrene 7.35 (1.29 W/Msq) call for a degree of thermal efficiency. Isocyanurate 11.69 (2.06 W/Msq) Exterior surface Flush End stiles 16-gauge steel ARCHITECTURAL SPECIFICATIONS* 418 Center stiles 16-gauge steel Standard mounting Angle mount Standard track 2" (51 mm) PART 1 GENERAL Standard springs 10,000 cycle 1.01 Work Included Weatherstripping Standard on bottom Operation Manual pull rope The doors will be 418 Series as manufactured by Finish White baked-on polyester Overhead Door Corporation. Lock Interior-mounted slide lock 1.02 Related Work Opening preparation, miscellaneous or structural metal Options work, access panels, finish or field painting, field electri- • Electric operator or chain hoist cal wiring, wire, conduit, fuses and disconnect switches • Bottom sensing edge are in the Scope of Work of other divisions or trades. • Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm) insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass 1.03 Quality Assurance • Individual lites with 1/2" insulated DSB In accordance with accepted quality assurance guidelines • 3" (76 mm) track for motor-operated doors, both the door and electric • Bracket mounting (not available on full vertical operator (optional) shall be manufactured by a single- (door tracks) source producer of door systems; as by Overhead Door • Higher-cycle springs in 25k, 50k, 75k, 100k cycles Corporation. • Exhaust ports • Jamb weatherseals, Saverseal pliable blade seal and PART 2 PRODUCT Therma-Flex seal • Bottom strips, including looped PVC weatherstrips, 2.01 Sections flexible PVC astragal weatherstrips and double-contact Section profile will be flush. Sections will be 16-gauge, weatherstrips roll-formed galvanized steel exterior. Sections will have a • Reinforcing struts of roll-formed steel hat sections • Movable center posts for 2" (51 mm) or 3" (76 mm) nominal thickness of 2" (51 mm). Doors will have rabbet- tracks that roll away, with automatic safety catches ed meeting rails to form weathertight joints and provide that prevent door closure when posts are removed full-width interlocking structural rigidity. Back cover will • Tumbler keyed lock be 26-gauge steel. (poly-backed, HIPS-backed optional) 2.02 Insulation Insulation will be polystyrene with an R-value of 7.35 (1.29 W/Msq) (Optional isocyanurate insulation with an R value of12
  15. 15. Sectional SteelDoor Systems SERIES 41811.69 or 2.06 W/Msq). Finish will be factory baked-on white polyester coating.2.03 Center and End Stiles 2.10 OperationCenter and end stiles will be 16-gauge steel, formed and fas- Operation will be by manual pull rope. (Optional chain hoisttened as integral structures with the rolled sections. End stiles and electric operator are available.)will be channel-shaped to 2" (51 mm) deep. PART 3 EXECUTION2.04 SpringsStandard springs will be 10,000 cycles. (Optional higher-cycle 3.01 Execution25,000, 50,000, 75,000, or 100,000-cycle springs). Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized2.05 Hardware Overhead Door Corporation distributor.Hinges and fixtures will be galvanized steel. Full-floating ball-bearing rollers will have hardened steel races. Roller sizes will *Note to specifier: This specification is a suggested guide. Available options are shown in parentheses.Schedule Panel Section Schedulebe adequate for design requirements and limitations. Door Width Number Door Height Number of of Panels Sections2.06 Track to 102" 61" to 71"Track is 2" (51 mm) standard (3" (76 mm) optional) angle- (3099 mm) 2 (2591 mm) 4mounted. (Bracket-mounted track is an option, but not avail- 103" to 122" 72" to 810" (3124 mm to 3708 mm) 3 (2616 mm to 3073 mm) 5able on full vertical doors). 123" to 162" 811" to 107" (3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 62.07 Lock 163" to 192" 108" to 124"Lock will be interior-mounted slide lock. (Optional tumbler (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7keyed lock is available.) 193" to 222" 125" to 141" (5867 mm to 6756 mm) 6 (3099 mm to 3683 mm) 82.08 Weatherstrip 223" to 262" 142" to 1510" (6782 mm to 7976 mm) 8 (3099 mm to 3683 mm) 9Bottom weatherstrip will be flexible PVC and held in place by 263" to 322" 1511" to 177" (7925 mm to 9195 mm) 10 (3099 mm to 3683 mm) 10a retainer that also provides additional reinforcement. 178" to 211" (3099 mm to 3683 mm) 112.09 Finish Installation and Service: Overhead Door Company of Madison overhead door corporation 13
  16. 16. Heavy– Duty Insulated Sectional Steel Doors SERIES 422 426 Standard Features At a Glance The 422 and 426 Series doors are ideal for heavy-duty applications requiring pro- Nominal thickness 2" (51 mm) tection against the elements. These doors Maximum standard width 292" (8890 mm) (422 Series) feature a 2" (51 mm) panel thickness, 16- 282" (8585 mm) (426 Series) Maximum standard height 241" (7341 mm) gauge steel intermediate and end stiles, Exterior steel 20-gauge galvanized steel ribbed steel exterior and 26-gauge steel (422 Series) back cover in a white finish. Polystyrene 24-gauge galvanized steel (426 Series) insulation (R-value of 7.35 or 1.29 W/Msq) Back cover 26-gauge galvanized steel is standard, and isocyanurate insulation, (poly-backed, HIPS- with an R-value of 11.69 (2.06 W/Msq) is an backed optional) option. The 422 Series is a 20-gauge steel Insulation Expanded polystyrene (standard) door available in sizes up to 292" in width Isocyanurate (optional) and 241" in height (8890 mm and 7341 R-value mm). The 426 Series is available in sizes up Polystyrene 7.35 (1.29 W/Msq) to 282" in width and 241" in height (8585 Isocyanurate 11.69 (2.06 W/Msq) Exterior surface Ribbed mm and 7341 mm), and is also offered in End stiles 16-gauge steel Industrial brown. A multitude of options — Center stiles 16-gauge steel including reinforcing struts, movable center Standard mounting Angle mount Standard track 2" (51 mm) posts, and motor operation — allow these Standard springs 10,000 cycle insulated heavy-duty doors to be used in a Weatherstripping Standard on bottom variety of commercial and industrial envi- Operation Manual pull rope ronments. Finish White baked-on polyester Lock Interior-mounted slide lock Options ARCHITECTURAL SPECIFICATIONS* 422 426 • Electric operator or chain hoist PART 1 GENERAL • Bottom sensing edge • Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm) 1.01 Work Included insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass The doors will be 422 or 426 Series as manufactured by • Individual lites with 1/2" insulated DSB Overhead Door Corporation. • Industrial brown polyester (426 Series only) • 3" (76 mm) track 1.02 Related Work • Bracket mounting (not available on full vertical) Opening preparation, miscellaneous or structural metal • Higher-cycle springs in 25k, 50k, 75k, 100k cycles work, access panels, finish or field painting, field electri- • Exhaust ports cal wiring, wire, conduit, fuses and disconnect switches • Jamb weatherseals, Saverseal pliable blade seal and are in the Scope of Work of other divisions or trades. Therma-Flex seal • Bottom strips, including looped PVC weatherstrips, 1.03 Quality Assurance flexible PVC astragal weatherstrips and double-contact In accordance with accepted quality assurance guidelines weatherstrips for motor-operated doors, both the door and electric • Reinforcing struts of roll-formed steel hat sections • Movable center posts for 2" (51 mm) or 3" (76 mm) tracks operator (optional) shall be manufactured by a single- that roll away, with automatic safety catches that prevent source producer of door systems; as by Overhead Door door closure when posts are removed Corporation. • Tumbler keyed lock PART 2 PRODUCT 2.01 Sections Section profile will be ribbed. Sections will be 20-gauge for the 422 Series or 24-gauge for the 426 Series14
  17. 17. Sectional SteelDoor Systems SERIES 422 426roll-formed galvanized steel exterior. Sections will have a nom-inal thickness of 2" (51 mm). Doors will have rabbeted meeting Panel Schedule Section Schedulerails to form weathertight joints and provide full-width inter- Door Width Number Door Height Number of of Panels Sectionslocking structural rigidity. Back cover will be 26-gauge steel.(poly-backed, HIPS-backed optional) to 102" to 81" (3099 mm) 2 (2464 mm) 4 103" to 122" 82" to 101" (3124 mm to 3708 mm) 3 (2489 mm to 3073 mm) 52.02 Insulation 123" to 162" 102" to 121" (3734 mm to 4928 mm) 4 (3099 mm to 3683 mm) 6Insulation will be polystyrene with an R-value of 7.35 (1.29 163" to 192" 122" to 141"W/Msq) (Optional isocyanurate insulation with an R value of (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 711.69 or 2.06 W/Msq). 193" to 222" 142" to 161" (5867 mm to 6756 mm) 6 (4318 mm to 4902 mm) 82.03 Center and End Stiles 223" to 262" 162" to 181" (6782 mm to 7976 mm) 8 (4928 mm to 5512 mm) 9Center and end stiles will be 16-gauge steel, formed and fas- 263" to 292"* 182" to 201" (8001 mm to 8890 mm) 10 (5537 mm to 6121 mm) 10tened as integral structures with the rolled sections. End stileswill be channel-shaped to 2" (51 mm) deep. 263" to 282"** 202" to 221" (8001 mm to 8534 mm) 10 (6147 mm to 6731 mm) 112.04 Springs 222" to 241" (6756 mm to 7341 mm) 12Standard springs will be 10,000 cycles. (Optional higher-cycle25,000, 50,000, 75,000, or 100,000-cycle springs). *422 Series **426 Series2.05 HardwareHinges and fixtures will be galvanized steel. Full-floating ball-bearing rollers will have hardened steel races. Roller sizes willbe adequate for design requirements and limitations.2.06 TrackTrack is 2" (51 mm) standard (3" (76 mm) optional) angle-mounted. (Bracket-mounted track is an option, but not avail-able on full vertical doors).2.07 LockLock will be interior-mounted slide lock. (Optional tumblerkeyed lock is available.)2.08 WeatherstripBottom weatherstrip will be flexible PVC and held in place bya retainer that also provides additional reinforcement.2.09 FinishFinish will be factory baked-on white (Industrial brown – 426Series) polyester.2.10 OperationOperation will be by manual pull rope. (Optional chain hoistand electric operator are available.)PART 3 EXECUTION3.01 ExecutionInstall the doors in accordance with Overhead DoorCorporation instructions and standards, using an authorizedOverhead Door Corporation distributor.*Note to specifier: This specification is a suggested guide. Available options are shown inparentheses. overhead door corporation 15
  18. 18. Medium– Duty Sectional Insulated Steel Doors SERIES 432 The 432 Series doors offer a 2" (51 mm) panel Standard Features At a Glance thickness, a nominal 24-gauge ribbed gal- Nominal thickness 2" (51 mm) vanized steel exterior, and a polybonded Maximum standard width 202" (6147 mm) back cover. Polystyrene insulation provides Maximum standard height 161" (4902 mm) an R-value of 7.35 (1.29 W/Msq) and Exterior steel nominal 24-gauge galvanized steel optional isocyanuarte provides an R-value Back cover polybonded laminate of 11.69 (2.06 W/Msq). A variety of options (26-gauge galvanized steel, makes this door an economical solution for HIPS-backed optional) applications requiring a medium-duty insu- Insulation Expanded polystyrene lated steel door. (standard) Isocyanurate (optional) R-value Polystyrene 7.35 (1.29 W/Msq) ARCHITECTURAL SPECIFICATIONS* 432 Isocyanurate 11.69 (2.06 W/Msq) Exterior surface Ribbed PART 1 GENERAL End stiles 16-gauge steel 1.01 Work Included Center stiles 16-gauge steel The doors will be 432 Series as manufactured by Standard mounting Angle mount Overhead Door Corporation. Standard track 2" (51 mm) Standard springs 10,000 cycle 1.02 Related Work Weatherstripping Standard on bottom Opening preparation, miscellaneous or structural metal Operation Manual pull rope work, access panels, finish or field painting, field electri- Finish White baked-on polyester cal wiring, wire, conduit, fuses and disconnect switches Lock Interior-mounted slide lock are in the Scope of Work of other divisions or trades. Options 1.03 Quality Assurance In accordance with accepted quality assurance guidelines • Electric operator or chain hoist for motor-operated doors, both the door and electric • Full sash section with 1/8" (3 mm) DSB; 1/8" (3 mm) operator (optional) shall be manufactured by a single- insulated; 1/8" (3 mm) and 1/4" (6 mm) plexiglass source producer of door systems; as by Overhead Door • Individual lites with 1/2" insulated DSB Corporation. • Industrial brown polyester paint • 3" (76 mm) track PART 2 PRODUCT • Bracket mounting (not available on full vertical door tracks) 2.01 Sections • Bottom sensing edge Section profile will be ribbed. Sections will be nominal, • Higher-cycle springs in 25k, 50k, 75k, 100k cycles 24-gauge, roll-formed galvanized steel exterior. Sections • Exhaust ports will have a nominal thickness of 2" (51 mm). Doors will • Jamb weatherseals, Saverseal pliable blade seal and have rabbeted meeting rails to form weathertight joints Therma-Flex seal and provide full-width interlocking structural rigidity. • Bottom strips, including looped PVC weatherstrips, Back cover will be polybonded laminate. (26-gauge flexible PVC astragal weatherstrips and double-contact galvanized steel, HIPS-backed optional) weatherstrips • Reinforcing struts of roll-formed steel hat sections 2.02 Insulation • Movable center posts for 2" (51 mm) or 3" (76 mm) Insulation will be polystyrene with an R-value of 7.35 (1.29 tracks that roll away, with automatic safety catches W/Msq). (Isocyanurate insulation with an R-value of 11.69 that prevent door closure when posts are removed or 2.06 W/Msq). • Tumbler keyed lock 2.03 Center and End Stiles Center and end stiles will be 16-gauge steel, formed and fastened as integral structures with the rolled sections. End stiles will be channel-shaped to 2" (51 mm) deep.16
  19. 19. Sectional SteelDoor Systems SERIES 4322.04 Springs 2.10 OperationStandard springs will be 10,000 cycles. (Optional higher-cycle Operation will be by manual pull rope. (Optional chain hoist25,000, 50,000, 75,000, or 100,000-cycle springs). and electric operator are available.)2.05 Hardware PART 3 EXECUTIONHinges and fixtures will be galvanized steel. Full-floating ball-bearing rollers will have hardened steel races. Roller sizes will 3.01 Executionbe adequate for design requirements and limitations. Install the doors in accordance with Overhead Door Corporation instructions and standards, using an authorized2.06 Track Overhead Door Corporation distributor.Track is 2" (51 mm) standard (3" (76 mm) optional) angle- *Note to specifier: This specification is a suggested guide. Available options are shown inmounted. (Bracket-mounted track is an option, but not avail- parentheses.able on full vertical doors).2.07 Lock Panel Schedule Section ScheduleLock will be interior-mounted slide lock. (Optional tumbler Door Width Number Door Height Number of of Panels Sectionskeyed lock is available.) to 102" 61" to 71" (3099 mm) 2 (2591 mm) 42.08 Weatherstrip 103" to 122" 72" to 810"Bottom weatherstrip will be flexible PVC and held in place by (3124 mm to 3708 mm) 3 (2616 mm to 3073 mm) 5a retainer that also provides additional reinforcement. 123" to 162" 4 811" to 107" 6 (3734 mm to 4928 mm) (3099 mm to 3683 mm)2.09 Finish 163" to 192" 108" to 124" (4953 mm to 5842 mm) 5 (3708 mm to 4293 mm) 7Finish will be factory baked-on white (Industrial brown option) 193" to 202" 125" to 161" (5867 mm to 6147 mm) 6 (3099 mm to 4902 mm) 8polyester coating. overhead door corporation 17
  20. 20. Track Detail Any of the following track configurations can be selected for all Sectional Steel Models. O.H.=Opening Height L.C.=Lift Clearance D.H.=Door Height Standard Lift Track Lift Clearance Track Full Vertical Track Standard 2” (51 mm) Track [15” (381 mm) Radius] 2” (51 mm) Track [15” (381 mm) Radius] 2” (51 mm) Track Door Height Centerline of Shaft Minimum Headroom Door Height Centerline of Shaft Minimum Headroom Door Height Centerline of Shaft Minimum Headroom Thru 12’0” (3658 mm) O.H. + 11 5/8” (295 mm) 14 1/4” (362 mm) Thru 12’0”(3658 mm) O.H.+L.C.+5 5/8”(143 mm) L.C.+ 8 3/4” (222 mm) Thru 11’0” (3353 mm) O.H.+O.H.+ 3/8” (10 mm) O.H.+101/4”(260 mm) Thru 16’0” (4877 mm) O.H. + 12 5/8” (321 mm) 20 1/2” (521 mm) Thru 16’0” (4877mm) O.H.+L.C.+5 5/8”(143 mm) L.C.+11 1/4” (286 mm) Thru 16’0” (4877 mm) O.H.+ O.H.+3/8” (10 mm) O.H.+101/4”(260 mm) 3” (76 mm) Track [15” (381 mm) Radius] 3” (76 mm) Track [15” (381 mm) Radius] 3” (76 mm) Track Thru 18’0” (5486 mm) O.H. + 14 5/8” (372 mm) 18” (457 mm) Thru 22’0” (6706 mm) O.H.+L.C.+6 5/8”(168 mm) L.C.+11 1/2” (292 mm) Thru 18’0” (5486 mm) O.H.+O.H.+3/8” (10 mm) O.H.+101/4”(260 mm) Thru 32’0” (9754 mm) O.H. + 16 7/8” (429 mm) 21 1/2” (546 mm) Thru 32’0” (9754 mm) O.H.+L.C.+6 5/8”(168 mm) L.C.+12 1/4” (311 mm) Low Headroom Track Low Headroom Track Springs to Front Springs to Rear 2” (51 mm) Track [15” (381 mm) Radius] 2” (51 mm) Track [15” (381 mm) Radius ] Door Height Centerline of Shaft Minimum Headroom Door Height Centerline of Shaft Minimum Headroom Thru 12’0” (3658 mm) D.H. + 8” (203 mm) 11 3/4” (299 mm) Thru 12’0” (3658 mm) O.H. + 2” (51 mm) 71/2” (191 mm) Thru 16’0” (4877 mm) D.H. + 8” (203 mm) 12 1/2”(318 mm) Thru 16’0” (4866 mm) O.H. + 2” (51 mm) 8” (2 0 3 mm) 3” (76 mm) Track [15” (381 mm) Radius] 3” (76 mm) Track [15” (381 mm) Radius] Thru 12’0” (3658 mm) D.H. + 9” (229 mm) 13” (330 mm) Thru 18’0” (5486 mm) O.H.+ 6 3/4”(171 mm) 9 3/4” (2 4 8 mm) Thru 18’0” (5486 mm) D.H. + 9” (229 mm) 13 3/4” (349 mm) Additional headroom required for drawbar operation. Consult your local Overhead Door Distributor.18
  21. 21. Framing & Pads Detail Sectional SteelDoor Systems Framing and pad details for common installation of Sectional Steel and Insulated Steel Doors in steel, wood, concrete and masonry jambs are provided here. If you require additional information or have special project requirements, refer to the Overhead Door Architectural Design Manual, or consult with the Overhead Door Applications Engineering Group or your local Overhead Door distributor. Steel Jambs Wood Jambs Concrete/Masonry Jambs 2" (51 mm) Track 2" (51 mm) Track 2" (51 mm) Track 3" (76 mm) * Track 3" (76 mm) * Track 3" (76 mm)* TrackMinimum Required Sideroom Minimum Required Sideroom Minimum Required SideroomTrack Type 2” Track (51 mm) 3” Track (76 mm)* Track Type 2” Track (51 mm) 3” Track (76 mm)* Track Type 2” Track (51 mm) 3” Track (76 mm)*Standard Lift 4 1/2" (114 mm) 6 1/2" (165 mm) Standard Lift 3 1/2" (8 9 mm) 5 1/2"(140 mm) Standard Lift 4 1/2" (1 1 4 mm) 6 1/2" (165 mm)Low Headroom 9" (229 mm) 10" (254 mm) Low Headroom 8" (203 mm) 9" (229 mm) Low Headroom 9" (229 mm) 10" (254 mm)Lift Clearance 4 1/2" (114 mm) 6 1/2" (165 mm) Lift Clearance 3 1/2" (8 9 mm) 5 1/2" (140 mm) Lift Clearance 4 1/2" (1 1 4 mm) 5 1/2"(140 mm)Full Vertical 4 1/2" (14 mm) 6 1/2" (165 mm) Full Vertical 3 1/2" (8 9 mm) 5 1/2" (140 mm) Full Vertical 4 1/2" (1 1 4 mm) 5 1/2" (140 mm) overhead door corporation 19
  22. 22. Electric Operators Operator Control Options Overhead Door Corporation offers the broadest line of electric operators to suit • Entrapment protection: electric sensing edge, new construction and retrofit applications, pneumatic sensing edge, or photoelectric sensors as well as unusual or special requirements. • Push-button, key or combination stations; surface- or Manufactured by Overhead Door flush-mounted for interior and/or exterior locations Corporation to meet the exacting perform- • Vehicle detectors, key card reader, photocell and ance requirements of Overhead Door’s door timer controls upward-acting doors, our ribbon branded • Treadle or pull switch stations operators afford precise control of door • Telephone entry and coded keyboard stations action for years of trouble-free operation. • Universal programmable door timer • Commercial light package In order to improve safety and enhance • Radio control systems (24 VAC or 120 VAC ) door and motor life, industry quality assur- • Explosion and dust ignition-proof systems ance guidelines recommend the choice of a single manufacturer for both door and Electric Operator Selection Guide operator applications. Overhead Door S Corporation is the only national manufac- Max. weight of door Max. height of door Adjustable clutch Continuous duty Totally enclosed 6-rib poly J-belt Explosion proof Planetary Gears turer of a full line of commercial and Mounting type Horsepower Worm gear industrial doors and operators specifically V-belt designed for integral applications. Armor Drive 1/2, 1 HP 32 3000 c c T,S,C (9753 mm) (1360 kg) Model SDB+ 1, 2 HP 28 3080 c c c c c S,C Operator Models (8534 mm) (1397 kg) Model L+ 1/3, 1/2, 28 1650 c c c c c T,S,C 3/4 HP (8534 mm) (748 kg) Model SDB+ Model JST+ 1/3, 1/2, 24 1450 c c c c T,S,C 3/4 HP (7315 mm) (657 kg) Model SDB+ is an extra-heavy-duty Model SEL+ 1/3,1/2 HP 18 940 c c c T,S commercial operator designed (5486 mm) (426 kg) Model MD 1/2 HP 14 620 c T,S to operate doors up to 25 (7620 (4267mm) (281 kg) mm) in height and 3080 pounds Mounting Options: T = Trolley S = Side mount C = Center mount (1397 kg). It is available as either a Entrapment Protection side-mounted or center-mounted unit. The installation of an external reversing device for all electrically operated commercial doors is recommended. Model L+ If a sensing edge or other reversing device is not installed, Model L+ is a heavy-duty com- a constant-contact control switch must be used to close mercial operator designed the door. We recommend a four-wire, fail-safe electric to operate doors up to 25 sensing edge that will not allow the door to close if the (7620 mm) in height and sensing edge is damaged or not working properly. 1650 pounds (748 kg). It is available as a trolley-type (20:1 gear ratio), or side-mount- NEW Operator Model ed or center-mounted unit (40:1 gear ratios). ArmorDrive™ The ArmorDrive comes available Model JST+ with a 1/2 hp or 1 hp motor and Model JST+ is a heavy-duty can open doors up to 3000 lbs. operator designed to operate This full-featured, modular doors up to 21 (6401 mm) in door control system lifts every height and 1450 pounds (657 door in our commercial and kg). It is available as a trolley- industrial lines – from sectional doors and type, side-mounted, or center- security grilles to the largest rolling steel service door. mounted unit. Customized mounting kits accomodating your specific door type, configuration and installation scenario.20
  23. 23. Sectional SteelDoor SystemsModel SEL+ Model MDModel SEL+ is a heavy-duty operator Model MD operates doors up to 14designed to operate doors up to 18 (4267 mm) in height and 620 pounds(5486 mm) in height and 940 pounds (281 kg). It has a built-in safety system(426 kg). It is available as a trolley- that automatically reverses during thetype or side-mounted unit. closing cycle. It is available as a trolley- type or side-mounted unit. Mounting DetailsTrolley-type (Drawbar) operators fea- Side-mounted (jackshaft) operators Center-mounted (jackshaft) operatorsture a power unit mounted between, feature a power unit mounted on the feature a power unit on the front wallabove and to the rear of the horizontal inside front wall and connected to the above the door opening. No additionaltracks. The drawbar drive provides posi- crosshead shaft, with an adjustable cou- backroom is required. Available ontive control of the door at all times, pling or drive chain and sprockets. models JST+, L+, and SDB+.making this operator the preferred Available on models MD, SEL+, JST+,choice whenever possible. Maximum SDB+, and L+.door width is 20 per drawbar. Availableon Models JST+, SEL+, L+, and MD.Trolley-type (Drawbar) Side Mount Type Center Mount/Jackshaft TypeJST+, SEL+, L+, MD MD, SEL+, JST+, SDB+, L+ JST+, L+, SDB+Maximum Headroom Requirements “A” Dimension - Minimum (Sideroom) Maximum Headroom RequirementsArmorDrive Track Requirements + 6 3/8 (162 mm) 2” (51mm) Track 3” (76mm) Track ArmorDrive Track Requirements + 14 3/4" (375 mm) JST+ Track Requirements + 5 1/2" (140 mm) ArmorDrive 22" (571 mm) 23 1/2" (597 mm) JST+ Track Requirements + 14" (356 mm) SEL+ Track Requirements + 4" (102 mm) MD 20 1/4" (514 mm) L+ Track Requirements + 9" (229 mm) L+ Track Requirements + 3" (76 mm) SEL+ 20" (508 mm) 21" (533 mm) SDB+ Track Requirements + 23" (584 mm) MD Track Requirements + 3 3/4" (95 mm) JST+ 20" (508 mm) 21" (533 mm) See page 18 for track details See page 18 for track details SDB+ 26" (660 mm) 26" (660 mm) L+ 23" (584 mm) 24" (610 mm)Depth Requirements -“A” Dimension (Backroom)ArmorDrive Door Height + 4’ 10” (1473 mm) JST+ Door Height + 4’ 2” (1295 mm) SEL+ Door Height + 4’ 0” (1219 mm) L+ Door Height + 6’ 0” (1829 mm) MD Door Height + 3’ 10” (1168 mm) overhead door corporation 21
  24. 24. The Original, lnnovative Choice for Unequalled Quality and ServiceOverhead Door Corporation pioneered the upward-acting door industry, inventing the first upward-acting door in 1921 and the first electric door operator in 1926. Today, we continue to be the industryleader through the strength of our product innovation, superior craftsmanship and outstanding customersupport, underscoring a legacy of quality, expertise and integrity. That’s why design and constructionprofessionals specify Overhead Door Corporation products more often than any other brand.The red Overhead Door Ribbon is a mark of quality that also reflects the pride we take in the people who support our prod-ucts. Our family of 400 Ribbon distributors across the country not only share our name and logo, but also our commitment toexcellence. Your Ribbon distributor will work with you in a consultative role to ensure that product selections achieve yourdesign and application requirements — in addition to providing expert installation, professional field service and ongoingmaintenance. From project design and manufacturing to installation and service, the Overhead Door Ribbon is your guaranteeof genuine quality and turnkey service excellence.Together with our Ribbon distributors, we offer comprehensive technical information and resource materials to sup-port your project, including: • Architectural Design Manual – a comprehensive guide to selecting, specifying and detailing all commercial and industrial Overhead Door products • Sweet’s Catalog for selection information about our products, and Sweet’s CD and CD-CAD for convenient electronic product information, technical specifications, and details with CAD “cut-and-paste” capability • Operation & Maintenance Manual – detailed product information, customized for your project, to ensure reliable, long-life door system operation • Custom design and technical assistance through our Corporate Application Engineering Teams JetRoll ® High Speed Doors Thermacore Sectional Doors ® Rolling & Side Folding Rolling Service Doors Security Grilles & ClosuresToday, Overhead Door Corporation — as well as its divisions, which include W.B. McGuire Co. for loading dock equipment andimpact traffic doors, and Horton Automatics for automated pedestrian entrances — is recognized as the leading, single-sourcemanufacturer of integrated door and operator systems for commercial, industrial and residential applications. With multiplemanufacturing locations throughout the United States, a state-of-the-art International Technical Center for design and engi-neering, and a national network of authorized Ribbon distributors, our capabilities are leading-edge and our field service andtechnical support second to none. Built best and backed best, Overhead Door is the industry’s leading choice for quality thatshows and lasts.To talk with the Overhead Door Distributor nearest you, call 1-800-887-DOOR.Overhead Door Corporation2501 S. State Hwy. 121Lewisville, Texas 75067(800) 275-3290 Telephone INDUSTRY LEADINGwww.OverheadDoor.com COMMERCIAL & INDUSTRIAL SOLUTIONS©2006 Overhead Door Corporation The Overhead Door Corporation family of quality commercial and industrial products includes:Form #: C900-068 1.2M 12/06 JAR A part of Sanwa Shutter Corporation Consistent with our policy of continuing product improvement, we reserve the right to change product specifications without notice or obligation

×