Product information of amazon by arterki technology limited

www.arterki-tool.com
Amazon Product Information
By Arterki Technology Limited

Product Description: 
The MIK-1 – the world´s first portable special machine for mortising
door locks. 
The security needs of many house and apartment owners have
increased considerably, so that more and more security locks are being
fitted. 
At 1800 watts (2.1 hp), the MIK-1cuts door locks of all sizes -
completely tear-free! 
The MIK-1 is clamped onto a large surface of the door. Due to the
Pertinax/rubber surface of the clamping device, the door surface
remains protected, whether mounted on site or in the workshop. 
DIY Machine—Door Lock Mortiser

Advantage：
Clean, quick, tear-free cuts
For use on the construction site
Usage scenarios： 
1.Cutting mortises for lock cases (installation of safety locks) 
2.Compatible materials include doors made of wood and wood-based
materials, solid wood

Product Advantage： 
1.Two special mortising chains in opposite directions - for tear-free
work and optimum chip flow. 
2.Handy, ergonomic, compact construction – for on-site work on
mounted doors. 
3.Two special mortising chains in opposite directions – for tear-free
work and optimum chip flow.

Product Specification： 
Model: MIK-1 
Mortiser Basic Size : 78*16*145mm (can be adjused, pls
see the product instructions point 2 ) 
Nominal No. of strokes – no load: 5770 r/min 
Nominal power input: 1800 W 
Universal motor: 230 -240V / 50 -60Hz 
Weight: 10 kg 
Dimension: 300*350*600mm

Product Instructions： 
1.The chain bars are maintenance-free and do not need to be re-
greased. 
2.Mortising size can be adjusted: 
If the length >78mm,you can move with right or left. 
If the width >16mm,you can move with before or after. 
If want to change the depth,you can adjust the scale.(The depth can be
adjustable from 0-150mm) 
Wider and longer slots can also be made to the exact millimetre by
following up with the MIK-1. 
3.No longer a problem: quick, precise lock mortising is now possible on
a mounted door. 
4.I have two nice friends---Mortiser chains. It can keep me clean.Two
special mortising chains in opposite directions ensure tear-free work

Buy Tips(Usage Door Lock Mortiser should notice of items):
1.The usage Slotted and should check and match the local electric
voltage and just can mount the power supply towards give or get an
electric shock blowy usage electric voltage whether.
2.Wear protective mask to prevent inhaling dust more.
3.The electricity should close to cut the power the source after Slotted
usage,pull out plug.
4.Before using with a trash can to avoid sawdust flying, keeping the
floor clean.

Product Description: 
This machine is specially designed to match the chain of MIK-1.Since
the milling chain would be blunt after some time of mortising,which
causes power-waste in using and affects Mortiser's service life,the
Milling Chain Grinder is highly required,in order to get the optimal
results again. 
Product Advantage:
1.Increase Chains' service life,complete the grinding work by yourself.
2.The chain would be blunt, can repair rather than replacement.
3.If repaired periodically,it can be reused for as long as 2500 times.
4.Adjust the tightness of chain manually.
5.Adjust the height of chain manually.
DIY Machine—Milling Chain Grinder

Product Specification: 
Model: XFJ-1 
Width of knife-edge: 16mm 
Length of knife-edge: 648mm 
Full-load speed: 2800r/min 
Supply voltage: 220v/240v
50/60Hz 
Full-load output power: 120w 
Full-load current: 0.6A 
Net Weight: 21KG

Product Instruction: 
1. With the specified high-intensity alloy tools, it can mortise precisely
with one cut and can be used for more than 300 times of mortising
continuously.Even it can be reused for as long as 2500 times,if repaired
periodically. 
2.Diacharge the coolant, aim to the interior edge of rimmed teeth and
adjust the height of milling cutter manually. Fix the workpiece back and
forth.Be sure the spark is in medium power.Grind the middle tooth in
the same way after grinding two laps continuously.(Note:rimmed teeth
first and then the middle teeth,and be sure to grind all teeth two
laps.)

Buy Tips(Usage Door Lock Mortiser should notice of
items): 
1.The usage grinder and should check and match the local electric
electric shock blowy usage electric voltage whether. 
2.Eight hours a day using the time,Guarantee it rest time. 
3.The electricity should close to cut the power the source after grinder
usage,pull out plug. 
4.When grinding,Please aligning edge.

Product Description:
Wood Milling Machine adopts single-phase motor,and it is suitable for
milling,shaping ,rounding and flat cutting by adjusting the height of
milling cutter.
Multiple materials(such as wood, plastic, and aluminum)can be
processed.
1.Provide good working environment for the workers---A Workbench
Dust Collection Device
2.Making a High-quality products for your client---Chamfer Functionality
To You
3.The indispensable machine for Carpentry worker.
4.Milling Variety of different shapes---Just change the knife rather than
machine.
5.For multiple material---don't worry, the machine be used in many
industries.
DIY Machine—WoodMilling Machine

Product Specification:
No load running speed 15000r/min
Input power 220/230v
50Hz
Rated power 2.2KW
Current <10A
Diameter of cutter handle 12.7mm
Diameter of eage cutter 50mm
Dimensions
650*580*900

Buy Tips(Usage WoodMilling Machine should notice of items):
1.The usage milling and should check and match the local electric
electric shock blowy usage electric voltage whether.
2.Eight hours a day using the time,Guarantee it rest time.
3.The electricity should close to cut the power the source after milling
usage,pull out plug.

DIY Machine—Angle Jointing Machine
Product Description:
For the Right-Angled Jointing Machine,it used one kind of special
cutter to make a 45 Angle,and then can match the edges exact
and well.This jointing machine is suitable to various kinds of
frames.Easy operation and Time-efficient.It also can make the
frame easy to dismantalling and bring considerable convenience
to all of you.
The Dovetail Joining System is a unique way of efficiently joining
wood and wood related materials like MDF, plywood, particle board,
etc. Most commonly, the system is used for all types of miter joints, on
anything from small, applied moulding to mitered cabinet doors, base
frames and furniture components. Other applications include difficult
to assemble compound miter joints, as found on crown moulding
around the top of cabinets, on custom store fixtures and even casket
lids. Square or butt-joints are another field of application, from face-
frame assembly to trim carpentry (plinth or corner block-to-casing
joint).

Product Advantage
Eliminating the clamping process saves considerable time
during assembly.
Eliminating additional fasteners saves money and reduces
damage due to improperly placed screws or nails (no more
cracks and splits).
Eliminating alignment problems during assembly improves
quality and reduces repair and re-work costs.
Consistent, reliable glue joints increase outputs and efficiency.
Keys are of consistent sizes and shape and are not influenced
by seasonal humidity changes. Inadvertent contact between
cutter heads or saw blades and Keys does not damage tooling.
Reduced in-shop assembly process and lower shipping costs
improve bottom line. Easy on-site assembly with pre-routed
components.
Product Advantage
The clamping or pressing
process is eliminated
No additional fasteners (nails,
screws, etc.) are needed
Parts are automatically
aligned when assembled.
Keys are designed to provide
correct clamping pressure for
proper glue joint.
System can be used for RTA
(ready to assemble) furniture
production.

Product Application 
All in all, the applications are as different and numerous
as the customers, from small one-man custom shops to
large furniture factories, from shutter manufacturers to
architectural millwork shops, from stair builders to yacht
outfitters to outdoor furniture manufacturers. 
How to work 
1.Dovetail Keyways are routed into the parts with
Dovetail Routing Machines 
2.Glue is applied to the mating surfaces. 
3.Dovetail Keys are inserted and driven into the material
with a hammer. 
4.A tight, perfectly aligned joint is the result .

DIY Machine—MIR-1
 Product Description 
For the Right-Angled Jointing Machine,it used one kind of special
cutter to make a 45 Angle,and then can match the edges exact
and well.This jointing machine is suitable to various kinds of
frames.Easy operation and Time-efficient.It also can make the
frame easy to dismantalling and bring considerable convenience
to all of you. 
Product Specification 
Depth of grooving: 0-100mm 
Angle of grooving: 45° 
No-load running speed: 26000r/min 
Supply Voltage: 220/230V 50/60Hz 
Input power: 550+200W 
Current: <4.0A

DIY Machine—MIR-3A.5A
 
Product Description
Numerical-control Jointing Machine uses the dovetail cutter to
complete the groove cutting and the joinery dovetail makes high
precision in jointing from 0-90 degree.With advance NC
programming technology,this machine is able to groove
automatically,which increased the efficiency markedly and applies
to bulk order.The machine is extensively used in jointing of
wooden doors,wooden windows,wooden frame,cabinets and so on.
Product Specification
Depth of grooving 0-85mm
Angle of grooving 0-90°
No-load running speed 28000r/min
Supply Voltage 220/230V 50/60Hz
Input power 550+200W
Current <4.0A
Diameter of handle 6mm

DIY Machine—Single-cutter angle-grinding Machine
 
Product Description 
This machine is able to cut angle of 45 degree and grind the
angle precisely, which is suitable to process various art
crafts,photo frame,wooden slats etc. 
With the advantage of accurate cutting angle,sharp blade,smooth
incision and easy operation,this machine is the first choice in
woodworking industry. 
Product Advantage 
1.Save time and effort successful completion of cutting. 
2.Cutting Angle of 45degree. 
3.No burr of edge. 
4.Compact body can replace the workplace more easier. 
5.Reseting automatically.

DIY Machine— Angle-grinding Machine
To increase the range of applications, we offer matched smaller cutting
heads with each machine. These heads are fitted at the MORSO
factory and can be replaced in only minutes. The side knives fit on both
heads; only the nose knives differ in design. 
We highly recommend the purchase of the smaller cutting head
when purchasing the machine. It is used to produce cope and half-lap
joints in window grills, cabinet door mullions, etc. The smaller NM head
actually costs less than a second pair of side knives!
• safety guard 
• two flip-stops 
• one center flip-stop 
• left and right hand side steel table extensions 
• left and right hand side aluminum fence rails 
• one set of original MORSO side knives for NM, factory ground and
honed

DIY Machine—SDXJJ-02
 
Utilizing the lever principle, This machine does not need electric source and can
be used anywhere with only one-step. Finish grinding with accurate and smooth
appearance which meets the demand of DIY completely. No dust,no need for
dust abatement and easy to mill or charge for a new blade. 
This new stylish machine can achieve accurate for angle grinding from 45 to
90.It can cut directly and easily.And it can be used in a large woodworking scope
for door,window and various kinds of wood crafts. 
Model : SDXJJ-02 
Grinding Specification: 65*65mm 
Grinding Thickness: 0-1.5mm 
Grinding Angle: 45°-90° 
Grinding Length: 60-1200mm 
Splicing Specifications: 28*16mm 
Dimensions: 640*580*986mm 
Net weight: 85Kg

It’s important on the basic DIY equipment added Cilinder,
Engine. IN order to strengthen the cylinder pressure,Capacity Air box has been
added too. It’s in character of pressure stability speediness. Noiseless.Dust-
free easy and safety for operation. 
Model: SDXJJ-02 
Grinding Specification: 100*45mm 
Grinding Thickness: 0-2mm 
Grinding Angle: 45°-90° 
Grinding Length: 60-1200mm 
Splicing Specifications: 28*16mm 
Working Pressure: 0.6-0.8MPa 
Dimensions: 640*580*986mm 
Net weight: 110Kg

It’s improved on the vase of DIY equipment,According to the first
choice of minimum power,Complete power complex structure new
machine.Work easily,Low noise,No dust,To save time and effort.It is
the best way to produce wood door,wood window or wood ambry. 
Model: SDXJJ-05 
Electrical Parameter: 230-240V/50-60Hz 
Input Power: 1800W 
Grinding Specification: 100*45mm 
Grinding Thickness: 1-3mm 
Grinding Angle: 45°-90° 
Grinding Length: 60-1200mm 
Splicing Specifications: 28*16mm 
Working Pressure: 0.6-0.8MPa 
Dimensions: 640*580*986mm 
Net weight: 115Kg

DIY Machine—Combined woodworking
planer&thicknesser
The combined Planner and Thicknesser has the double functions of surface
and thickness plane.It is produced by high quality aluminum and owns the
advantage of flexible frame,light weight,steady performance,efficient and safe
operation.we adopted the advanced technology from Germany and our raw
materials are all environment-friendly. 
Length of planing table: 1015mm 
Length of thickness table: 400mm 
Max Width of planing: 260mm 
Max Width of thickness: 160mm 
Diameter of cutter block: 62.5mm 
Noise: <90db 
Cutter block speed: 6500r/min 
Thickness feed rate: 5m/min 
Motor speed: 2800/3400r/min 
Guide plate tilt: 45-90° 
Height of planing table: 840mm 
Net weight: 66kg

DIY Machine—Multifunctional woodworking machine
 
On the basis of Combined Woodworking Planer&Thicknesser,we add the
functions as saw and drill to this machine,which makes it to be a multifunctional
woodworking tool.
Cutter block speed: 6000r/min 
Motor speed: 2800r/min 
Diameter of the saw: 250mm 
Max depth of cutting: 85mm 
Max diameter of drilling: 13mm 
Net weight: 70kg

DIY Machine—Multifunctional woodworking machine
 
Buyers must-read 
If you don’t want to carry a heavy wooden work tool kit, this multifunctional
woodworking machines XS-05 is an ideal choice for you. This is by far the best
woodworking multifunctional machines for carpenter that serves various
functions at a time. Fitted with woodworking planers, this planer machine can
saw and drill in an easier way through easy movement planner. In addition, it
can also be used for drill presses and making table saws. This is because it is
also fitted with 45 degree cutting machine qualities as well. In furniture
manufactory, an ease of use that is truly unique in this machine, it serves as a
complete wooden work kit. 
• This planer machine can saw and drill in an easier way through easy
movement planner. 
• Machine safety switches installed,You can stop the machine with the knee
operation
• The process of using machines to reduce noise 
• Power driver dust collection device,Ensure efficient cleaning effect. 
• The metal legs allow to move the machine easily.

DIY Machine—Wooden Bead Sliding Table Saw Machine
 
Voltage: 220V 
Total power: 2.2kw 
Max.working width: 100mm 
Main saw spindle speed: 2800r/min 
Max.working thickness: 60mm 
Blade Size: 250*1.6*1.1*25.4*60T 
Min working Length: 100mm 
Net weight : 68KG 
Working table stroke: 250mm 
Package dimensions: 630*500*760 
How to make beads 
Step1:Prepare a wood(Can cut into a square or up to your habit) 
Step2:Make beads 
Step3:Drill a hole 
Stap4:Polish the beads 
This machine can help you finish the step 1 Can cut into a square

DIY Machine—Wooden Bead Sliding Table Saw Machine
 Buyers must-read
Making beads bracelets and other diy crafts , Do you like
handmaking some diy product?
1.Like this machine ,you are a people who loves life. If have this
machine in our home, I think this is one of the thing we have
come to enjoy is accompanying with famlily and make what we
love.
2.Like this machine,you are a boss who care for employee. If
have this machine in our factory, I think this is one of thing let
employee happy is making diy beads with a simple,effective
method.
3.Like this machine,you are a dealer who responsible for the
customer. If you sale this machine, I think this is one of thing let
many customer satifactory is the providing high quality products
and services.

DIY Machine—Wooden Bead Making Machine RF-180
 
Product Description 
The wooden beads making machine, often called hand catenary bead machine,
is ideal for wooden work especially for making beads while making furniture,
wooden products and decorative items. This bead making machine works well
for all wood types, including sandalwood heights and sandal wood furniture. In
addition, it is also a great tool for making diy crafts, bracelets diy and weaving
beads. The Blood Dragon wooden bracelets and wood bowel woodmaking
machine are some other great versions of it, however, at initial level, this makes
an idea choice. For smaller diy wooden projects to artistic woodwork for furniture,
the wooden beads making machine is a must-have. 
This machine can help you finish the step 2 make beads

Making beads bracelets and other diy crafts , Do you like handmaking some diy
product? 
1.Like this machine ,you are a people who loves life. If have this machine in our
home, I think this is one of the thing we have come to enjoy is accompanying
with famlily and make what we love. 
2.Like this machine,you are a boss who care for employee. If have this machine
in our factory, I think this is one of thing let employee happy is making diy beads
with a simple,effective method. 
3.Like this machine,you are a dealer who responsible for the customer. If you
sale this machine, I think this is one of thing let many customer satifactory is the
providing high quality products and services.

Voltage 220V
Spindle precision 0.01-0.02mm
Maximum diameter and turn on the lathe180mm
Spindle bore 20mm
Maximum length of the bed saddle 110mm
Speed of spindle Low speed 100-1100r/min+10%
Power of motor 400W
Speed of spindle High speed100-2800r/min+10%
Power of beads motor 250W
Net weight 36Kg
Package dimensions 67*330*330mm
Cutter size 6 , 8 ,10 ,12 ,14 ,15 ,16 ,18 , 20 ,22 , 25 , 28 , 30
mm

DIY Machine—CNC Beads Making Machine
 
The CNC wooden beads making machine, often called hand catenary bead
machine, is ideal for wooden work especially for making beads while making
furniture, wooden products and decorative items. This bead making machine
works well for all wood types, including sandalwood heights and sandal wood
furniture. In addition, it is also a great tool for making diy crafts, bracelets diy
and weaving beads. The Blood Dragon wooden bracelets and wood bowel
woodmaking machine are some other great versions of it, however, at initial
level, this makes an idea choice. For smaller diy wooden projects to artistic
woodwork for furniture, the CNC wooden beads making machine is a must-
have. 
This machine can help you finish the step 2 make beads

Voltage 220V
Spindle motor speed 2800r/min+10%
Spindle motor power 500W
Processing precision >0.01mm
Maximum machining length 250mm
Max. rotary diameter of workpiece 180mm
Power of motor 1KW
Cutter size 6*4*2*2T
Spindle hole 40mm
The hight of tool rest 100mm
Chuck diameter 130mm
Package dimensions 1100*680*800mm
XYZ-axis stepper motor max.speed 1000r/min
Net weight 112Kg

product?

DIY Machine—Wooden Bead Drilling Machine
This wooden beads drilling machine is a must-have in your wooden work tool kit,
since it serves the purpose of beads making in an easier and efficient way. A
bead is decorative treatment applied to different components of wooden boxes,
strips, blocks and furniture. This hole making machine is best to use under all
these cases. It acts like a minibidirectional drilling machine that helps in making
perforated beads as well. As far as dimensions are concerned, this precision
perforated drill machine drills beads between 5 and 35 mm. The quality is high
enough to bear pressure and drills beads in shorter span of time than other
machines. 
This machine can help you finish the step 3 drill a hole

Voltage 220V
Total sliding travel of clamp 35mm
Working accuracy 0.01-0.02mm
Rotation of clamp 180°
Max Shank Dia. of the drill 5mm
Power of motor 60W
Max Turning Length 35mm
Speed of motor 500-15000r/min
Min Turning Length 5mm
Package dimensions 300*190*200
Max Turning Diameter 35mm
Min Turning Diameter 5mm
Net weight 5.2KG

product?

DIY Machine—Wooden Bead Polishing Machine big
 Product Specification 
Finishing of the wooden work is highly reliant on its smoothness and neatness.
The wooden beads polishing machine creates a smooth beads and shiny
surface with an immense ease and in no time. This machine also functions like
beads grinding machine that can make breads bracelets as well. Hence it is also
called beads bracelet maker. The machine has been manufactured to make
wooden beads necklace, and possesses the qualities like wool round,
sandpaper polishing machine. In the end you get a neat polished surface in not
time, because of its high speed and efficiency. The wooden beads are one of the
highly demanded woodworks, especially for decoration purpose. 
This machine can help you finish the step 4 polish the beads

Voltage 220V
Axial diameter of main motor 20mm
Working range 6-30mm
Total power 160W
Disc diameter 250mm
Disc height 5/10/15mm
Specifications of top wall sandpaper 250*20mm
Specifications of footwall sandpaper 250*10mm
Net weight 31KG
Advantage：Timed control Motor Regulating Speed Motor Reversion

product?

DIY Machine—Wooden Bead Polishing Machine small
 Product Specification
Finishing of the wooden work is highly reliant on its smoothness and neatness.
The wooden beads polishing machine creates a smooth beads and shiny
surface with an immense ease and in no time. This machine also functions like
beads grinding machine that can make breads bracelets as well. Hence it is also
called beads bracelet maker. The machine has been manufactured to make
wooden beads necklace, and possesses the qualities like wool round,
sandpaper polishing machine. In the end you get a neat polished surface in not
time, because of its high speed and efficiency. The wooden beads are one of the
highly demanded woodworks, especially for decoration purpose.
How to make beads
Step1:Prepare a wood(Can cut into a square or up to your habit)
Step2:Make beads
Step3:Drill a hole
Stap4:Polish the beads
This machine can help you finish the step 4 polish the beads

Voltage 220V
Axial diameter of main motor 17mm
Working range 6-20mm
Total power 60W
Disc diameter 150mm
Disc height 5/15mm
Specifications of top wall sandpaper 150*17mm
Specifications of footwall sandpaper 150*17mm
Net weight 8KG
Advantage：Timed control Motor Regulating Speed Motor Reversion

Buyers must-read
product?
with famlily and make what we love.
with a simple,effective method.
providing high quality products and services.

"A workman must first sharpen his tools if he is to do his work well."Because this
sentence, Arterki Technology Limited was founded. Our members all have the same
Belief, we hope to bring convenience to our customers work.
Years ago We fell in love with Providing production solutions for my Each customer.We
just wanted to make our work with a professional attitude.We had to learn about tool use
and a correct usage,We hope that we make every effort to work,in order to every
customer can save time and effort.
Corporate Mission: To make a difference to your working efficiency.
Write By Arterki Technology Limited Founder Harrison Chan
Arterki Tool

With my 10 years of woodworking experience, I desided to just start from scratch and
design a whole new woodworking system.I've always liked Japanese furniture design,and
produced office furniture Personally.My woodworking products let you focus on your
artwork instead of sharpening,rubbing bevels and fussing with jaw changes.
The early start time,I work with a lot of pressure.I want to give every customer their
solutions are suitable,and also want to become profession sales. However I will make all
kinds of artwork(such as wood beads,bowel,picture frame,door,window.cabinet, and so
on.)In the production process, I will summarize many of my wrong place To remind my
clients. 
I've always been doing it ,Because it can not only make my work more professional, more
efficient,but also feel relax and enjoy. 
I've tried to provide you here with the info need to pick the right products for the projects
you want to creat. 
Because I'm stubborn about quality and product performance, we painstakingly make
every product ourselves . I know you're going to love everything we make and I back that
up with an unconditional guarantee. 
Arterki believe : Without challenges,Moving backward is inevitable. Face the challenges
and failures with your courage,We try to Make a difference to the world with our artisan
techniques. 
Improving your work efficiency is our supreme goal. 
Write By Arterki Technology Limited Founder Harrison Chan 
Arterki DIY Machine

Thank you

Product information of amazon by arterki technology limited

Recommended

More Related Content

Similar to Product information of amazon by arterki technology limited

Similar to Product information of amazon by arterki technology limited (20)

Product information of amazon by arterki technology limited