Your SlideShare is downloading. ×
0
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Catalogo carbatec
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

Catalogo carbatec

3,217

Published on

Catalogo de ferramentas da Carbatec com tudo que voce precisa para sua marcenaria.

Catalogo de ferramentas da Carbatec com tudo que voce precisa para sua marcenaria.

0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
3,217
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
36
Comments
0
Likes
1
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. May 2013 CATALOGUE AUSTRALIA’S LARGEST RANGE OF TOOLS FOR WOOD
  • 2. We hope you enjoy the May Catalogue, its pages are packed with tools to help you realise your workshop dreams. There are some great specials and exciting new products in the rear section of this edition. Items on sale this time include some great machinery deals, selected Festool products, Teknatool® Nova chucks, Robert Sorby® Turnmaster and the Pfeil Carver’s Starter Kit. The Carba-Tec® catalogue is only part of the story, there are plenty more items featured on our website as well as projects to make. The archive section contains all the articles and profiles that we have featured as well as additional material. It’s always worth logging on to check out new products and specials. Our YouTube channel has great videos of our products including Leigh® , Incra® and Kreg® . This is a terrific way to learn tips and tricks about products you may be interested in. Nothing beats a browse through one of our stores, we love meeting people and most of our staff are woodworkers and have first hand experience with our products. Our 3 day sales are a great opportunity to catch up with the experts, see instore demos and grab a bargain. The sale dates are announced by email or on our website. If you would like to register you email address please visit our website www.carbatec.com.au/newsletter. There is a bit of a nautical theme this time as two of our staff members went to Hobart for the wooden boat festival. It seems that there are a lot of you out there building, sailing or restoring boats. They make a great project and there are designs available to suit just about any skill level or workshop size. We hope you enjoy the articles about the amazing craftspeople from the festival that will be featured online over the coming months. Happy woodworking. The Carba-Tec® Team Table of Contents To Our Valued Customers Woodwork Machinery & Accessories 8 Woodturning 38 Dust Extraction 48 Safety & Workshop Accessories 53 Metalworking 57 Marking & Measuring 63 Handtools & Handplanes 69 Sharpening 82 Clamping, Vises & Benches 87 Power Tools 92 Routing, Saw Blades & Accessories 97 Drilling & Boring 110 Dovetail Jigs & Joinery 115 Adhesives & Finishing 122 Woodcarving 125 Pens, Clocks & Craft 133 Specials/New Products 139 Woodworking Articles • A Bandsaw For All Occasions pg. 3 • A Celebration of Wooden Boats pg. 4-5 • Project: D5 Plywood Dinghy pg. 6 • Teknatool Innovation Leaders pg. 7 Front cover: Traditional Irish Currach, built by Mark Redden. Photography by Donovan Knowles Enhance your project using the Veritas® String Inlay Tool System! Watch a video on our Youtube channel! Perfect for instruments, furniture and decorative box work.
  • 3. A Abrasives......................36, 37, 45, 46 Adhesives............................. 123-124 Adze ........................................ 71 Air Cleaner, Room.......................... 48 Alignment System.......................... 32 Angle Finder............................. 65, 68 Aprons ........................................ 55 Arbortech Carving........................ 132 Archer: Flexible Shaft Tool........... 132 Lock Mortiser................... 92 Workgear.......................... 55 Arkansas Stones............................ 82 Auger Gimlets.............................. 111 Autoloader..................................... 74 B Band Clamps................................. 90 Bandsaws................................ 12, 13 Bandsaw blades............................. 13 Barrel Plug Cutters............... 113, 114 Bastard Files.................................. 59 Batoning Chisel.............................. 70 Bead Lock.................................... 119 Beading Tool (Veritas).................... 74 Beam Compass....................... 63, 64 Bed Extension................................ 38 Belt/Disc Sanders..................... 21, 22 Belt Sanders............................ 21, 22 Bench Dogs................................... 87 Bench Grinders........................ 85, 86 Bench Planes............................75-79 Bench Stop.................................... 89 Benders .................................. 59, 60 Bending Pliers................................ 60 Bessey Clamps.............................. 91 Bevels .................................. 64, 65 Bevel Edge Chisels................... 69, 70 Biesemeyer style fence.................. 26 Big Gulp ........................................ 50 Biscuits ...................................... 118 Blades: Bandsaw.......................... 13 Circular................... 106, 107 Dado.............................. 107 Scroll Saw........................ 11 Blade Brazing Kit............................ 31 Blade Honing................................. 28 Blade Setting Guide........................ 26 Blast Gates.................................... 52 Block Planes............................ 75, 79 Bobbin Sanders............................. 22 Books ................................ Website Bosch Power Tools........................ 93 Bowl Saver.................................... 45 Boxes ........................................ 56 Braces (Suspenders)...................... 56 Brassware................................... 138 Build-It (Incra)................................ 36 Burnisher....................................... 80 Butt Chisels..................... ­69, 70, 145 C Cabinet Saw........................... 8, 9, 10 Cabinet Scrapers...................... 80, 81 Calipers: Digital............................... 68 Spring......................... 41, 68 Cam Clamps.................................. 36 Camellia Oil.................................... 74 Candle Cups................................ 138 Carpenter’s Pencil Set.................... 63 Carpenter’s Saws........................... 72 Carving Glove................................ 55 Carving Mallets.............................. 71 Carving Tools........................ 125-132 Castors with Brake......................... 28 Cats Paws..................................... 71 Centre Finder........................... 41, 46 Chair Doctor Glue......................... 124 Chinese Scissors........................... 74 Chisels: Bevel Edge.................. 69, 70 Butt............................ 69, 70 Carving.................... 125-130 Corner........................ 69, 74 Japanese.................... 69, 70 Pfeil..............69-70, 125-129 Woodturning......... 41, 46, 47 Chisel Grinding Jigs: Carba-Tec................... 82, 86 Veritas.............................. 86 Woodcut........................... 41 Chisel Mortiser.............................. 19 Chisel Rolls.............................. 54, 55 Chucks (Drill)..................... 44, 45, 61 Chucks (Woodturning) Teknatool.......................... 42 Circle Cutter................................. 114 Circular Saw Blades............. 106, 107 Clamps: Band................................. 90 Bessey............................. 91 Clamp Heads.................... 88 Edge................................. 89 Hold Down.................. 87, 88 Mitre................................. 90 Panel...................88, website Picture Framing......... 90, 119 Pipe.................................. 88 ProGrip™.......................... 90 Sash................................. 88 T-Bar................................ 88 Toggle.............................. 36 Clock Movements................. 136-137 CMT: Countersinks................... 114 Dado.............................. 107 Drills....................... 105, 110 Router bits................. 97-104 Saw Blades............. 106, 107 CNC Router.................................... 10 Combination Machines................... 18 Combination Square....................... 65 Compass................................. 63, 64 Compass Plane (Kunz)................... 79 Contractor Saw................................ 8 Conveyor roller............................... 27 Coping saw.................................... 71 Corner Chisels......................... 69, 74 Corner Clamps............... 90, 119, 120 Countersinks........................ 113, 114 Creusen Grinders........................... 86 Cross Cut Sled............................... 26 Cross Slide Vise............................. 89 Cyclone Dust Extractor............. 49, 51 D Dado Blades................................ 107 Dead Blow Hammer....................... 71 Deburring Tool............................... 61 Depth gauge.............................65-68 Dial Indicator............................ 32, 60 Diamond: Files........................... 83, 84 Wheel Dressers................ 83 Whetstones...................... 84 Digital: Angle Finder...................... 68 Caliper.............................. 68 Height Gauge.............. 53, 68 Disc Sanders........................... 21, 22 DMT Diamond Whetstones............. 84 Dovetail Guides.............................. 73 Jigs........................ 116, 118 Markers............................ 65 Saddle.............................. 65 Saw.................................. 73 Veritas.............................. 73 Dowel Former.............................. 118 Doweling Jigs.............................. 118 Dozuki Saws.................................. 72 Draw Knives........................ 125, 130 Drawer slide mount........................ 31 Dressers: Diamond Tip..................... 83 Drill Bits: Brad Point....................... 110 Circle Cutters.................. 114 Countersinks........... 113, 114 Expanding....................... 111 Forstner Style........... 111-113 Pen................................. 134 Saw Tooth Bits................ 112 Spade............................. 111 Tile................................. 111 Tungsten Tip................... 110 Twist....................... 110, 111 Vix Style......................... 110 Drill Chucks....................... 44, 45, 61 Drill Doctor.................................... 82 Drill Presses..................... 20, 21, 114 Drill Press Table............................. 33 Drum sanders................................ 23 Dust: Arm.................................. 51 Extractors....................48-50 Hose & Fittings............50-52 Masks.............................. 53 Room Air Filters................ 48 Dust Deputy................................... 51 E Earlex ...................................... 122 Edgebander.................................... 92 Edge Clamps................................. 89 Edge Sander.................................. 22 Engineers Vise............................... 62 Epoxy (West System)................... 124 Excalibur Scroll Saw....................... 11 Expanding Drill Bit........................ 111 F Face Frame Jigs........................... 120 Faceplates............................... 44, 61 Feather Boards..........................28-30 Fein ........................................ 92 Felt Wheels.................................... 86 Ferrules ........................................ 46 Festool .................................. 94, 95 Files .................................. 59, 83 Fingernail Jig.................................. 45 Finishing Products................. 122-124 Flexcut (Carving).................. 129, 130 Flexible Grinders........................... 132 Flexible Light.................................. 54 Flexible Ruler.................................. 65 Flocking Kit.................................. 138 Floor Sweep................................... 50 Flush, Glue Plane........................... 76 Flush Trim Saws: Japanese.......................... 73 Veritas.............................. 73 Folding Mitre Saw Stand................. 26 Forstner Bits......................... 112-113 Framing Tools........................ 90, 119 Fret (Guitar) Saw............................ 72 Fretsaw ........................................ 71 Fuller Plug Cutters........................ 113 G Gents Saw (Pax)............................ 71 Gimlets ...................................... 111 Glues ............................... 122-124 Glue Bottle................................... 122 Glue Injector................................ 122 Good Hand Clamps........................ 36 Grandfather Clocks....................... 137 Granite Surface Plate...................... 83 Grinders (Bench)...................... 85, 86 Guillotine (Mitre Trimmer)............. 120 Guitar Saw..................................... 72 H Hamlet Chisels: Carpenter’s....................... 69 Woodturning............... 46, 47 Hammers: Dead Blow........................ 71 Japanese.......................... 71 Handles & Knobs........................... 35 Handplanes: CARBA-TEC...............website Groz................................. 79 Ibex Luthier ...................... 80 Kunz............................79-80 Record (Irwin).................. 79 Veritas.........................75-78 Handsaws: Flush Cut.......................... 73 Gents.......................... 71, 73 Japanese.............72, website Pax............................. 71, 72 Tenon............................... 71 Veneer.............................. 72 Veritas.............................. 73 Handscrew Clamps........................ 89 Hanger Bolts.................................. 35 Hardware Kit.................................. 36 Hatchet ........................................ 71 Height Gauges......................... 33, 68 Hermle Clocks................137, website Hide Glue..................................... 123 Hinges ...................................... 138 Hinge Sinking Bits........................ 105 Hold Downs............................. 87, 88 Honing Compound.......82, 85 86, 132 Honing Guides: Economy.......................... 82 Veritas.............................. 82 Honing Wheels (Felt)...................... 86 Horizontal Borer............................. 19 Hose and Fittings......................50-52 Hot Stuff Super Glue..................... 123 Hut Woodturners Wax.................. 122 HVLP Spray Units......................... 122 Hygrometers................................ 136 I IBEX Luthiers Tools........................ 80 Incra ............................ 32, 38, 67 Inlay Kit ...................................... 107 Inlay Saw (Pax).............................. 72 IRWIN: Bevel................................ 65 Chisels............................. 69 Clamps............................. 88 Handplanes....................... 79 Spokeshaves.................... 81 Squares............................ 65 J Japanese Chisels....................... 69, 70 Saws................................ 72 Waterstones..................... 83 JET ............................... 8-23, 38 Jewellers Saw................................ 71 Jointers ............................ 14, 15, 18 K ­­Kataba Saws.................................. 72 Kevlar Gloves................................. 55 Keyhole Bit................................... 101 Keyhole Template......................... 119 Kitchen Knives........................website Knives Box Cutter......................... 74 Carving............126, 129, 130 Draw...................... 125, 130 Japanese Kitchen.......website Multifunction Tool............. 74 Index
  • 4. Knobs ........................................ 35 Knurling Tools................................ 67 Kreg Accessories....... 30-31,34,67 Clamps..................... 89, 120 Deck Jig.......................... 120 Pocket Hole Jigs...... 111,120 Router Table.................24-25 Screws........................... 121 Kugihiki Saws................................ 72 Kunz Veneering Hammer........... 71 Compass Plane................. 79 Pocket Planes................... 79 Scraper Plane................... 80 Spokeshaves.................... 81 Trammel Points................. 63 L Lapping Kit.................................... 83 Lapping Plate................................. 83 Lathes Carba-Tec................... 38, 39 Jet.............................. 38, 39 Metalworking...............58-59 Teknatool.................. 40, 141 Lazy Susan Bearings.................... 138 Leather: Aprons............................. 55 Chisel Rolls................. 54, 55 Punch............................... 74 Strops............... 86, 130-132 Leigh Jigs............................. 115-118 Lettering Template........................ 118 Lights ........................................ 54 Link Belt ........................................ 28 Little Victor Planes......................... 79 Linishers.................................. 21, 22 Live Centres............42, 44, 45, 61, 62 Lock mortiser................................ 92 Log Scribe..................................... 64 Loupes ........................................ 54 Luthiers Tools................ 80, 125, 145 M Magnets (Rare Earth)................... 133 Magnetic Bases....................... 29, 54 Magnetic Corner Chisel.................. 74 Magnetic Tool Holders.................. 132 Magnifying Glasses........................ 54 Magnifying light............................. 54 Magswitch............................. 29, 141 Mallets ........................................ 71 Marking Gauges....................... 63, 64 Marking Knives.............................. 63 Masks, Dust................................... 53 Merlin Moisture Meters................... 73 Metal Bender.................................. 59 Metal Detector............................... 28 Metal Lathes............................ 58, 59 Metal work tools.......................57-62 Metal Sheet Roller.......................... 59 Metalwork Machines.................57-59 Metalworking Accessories.........59-62 Milling Machines...................... 57, 59 Mini Wood Lathes.................... 38, 39 Micro Drills.................................. 111 Microplane (Rasps)...................... 131 Mitre Box Saws............................ 119 Mitre Clamps......................... 90, 119 Mitre Gauge Carba-Tec......................... 32 Incra................................. 32 Kreg......................... 30, 144 Mitre Saw Stand............................. 26 Mitre Saws (Hand)....................... 119 Mitre Track Insert........................... 34 Mitre Trimmer, Guillotine............... 119 Mobile Machine Bases................... 28 Moisture Meters............................. 73 Mops (Buffing)......................... 85, 86 Morse Taper Reducer..................... 45 Mortise Chisels (Hand).................. 69 Mortise Chisels (Machine)............. 33 Mortise Chisel Sharpener............... 32 Mortising Attachments................... 33 Mortise Gauge Heads..................... 63 Mortise Gauges............................. 63 Mortiser (Lock).............................. 92 Mortising Machines............... 19, 115 Moulding Machines.................. 16, 25 Multi Stop...................................... 33 Multi Tool....................................... 74 N Nagura stone................................. 83 Nail pullers............................. 71, 145 Needle Files................................... 59 Nigiri Shears Japanese................... 70 Nobex ................................ 65, 119 Nova turning chucks...................... 42 Nutcracker kit............................... 138 O Odd job marking out tool................ 64 Organoil ...................................... 122 Osc. Belt Sander............................ 22 Osc. Spindle Sanders..................... 22 Outrigger........................................ 42 P Pan Shear...................................... 59 Panel Clamps....................88, website Panel Guide.................................... 90 Panel Saw...................................... 10 Paring Chisels................................ 70 Pax Saws................................. 71, 72 Pencil .................................. 63, 67 Pen Blanks................................... 134 Pen Drill Jig.................................. 134 Pen Parts/Access................. 134, 135 Pepper and Salt Parts................... 133 Pfeil Bench Chisels.................. 69, 70 Pfeil Carving Tools................ 125-129 Pfeil Sharpening..................... 82, 132 Picture Framing.......................... 1119 Pipe Clamps.................................. 88 Plane Blade Sharpener................... 28 Plane Screwdriver.......................... 77 Planers: Carba-Tec................... 14, 15 JET................................... 15 Planer Blade Hone.......................... 28 Planer Moulder............................... 16 Planer setting jig............................ 26 Pleated Filter Cartridge................... 49 Plug Cutters......................... 113, 114 Plow Plane..................................... 77 Pneumatic Drum............................ 36 Pocket Hole Jigs.......................... 120 Pocket Wrench............................... 74 Polishing Compound................ 82, 86 Poly Gauge.................................... 32 Polycarbonate Sheet...................... 33 Potpourri Lids.............................. 133 Power Feed Units........................... 32 Power Mask................................... 53 Premium Block Planes................... 75 Pro Seam Ripper Kit....................... 74 ProGrip™ System.......................... 90 Profile Gauge............................... 136 Protractor/Saw Guide..................... 27 Punches.................................. 63, 74 Purfling Cutter................................ 80 Push Blocks & Sticks............... 28, 30 Pyrography.................................. 133 Q Quick Release Front Vise................ 87 Quick Release Sliding Tail Vise....... 87 R Radial Arm Drill Press.................... 20 Rare Earth Magnets..................... 133 Rasps .............................. 130, 131 Reamer ................................ 60, 111 Record (IRWIN) Planes.................. 79 Respirators.................................... 53 Riffler Files................................... 130 Rockler Bench Cookies.................. 55 Rockler Caliper Gauge/Cent. Finder.41 Rockler Magnetic Jointer Jig........... 26 Rockler Router Table Box Joint Jig.. 26 Rockler Trim Router Table............... 24 Roller Stands........................... 27, 33 Room Air Filters............................. 48 Rosette Cutter.............................. 107 Rotary Tables................................. 62 Rotary Vises.................................. 62 Routers .................................. 93. 94 Routers CNC.................................. 10 Router Bits CARBA-TEC............ 107, 109 CMT..........................97-104 Router Bushes............................. 105 Router Collet Extension................ 105 Router Mat (non slip)..................... 56 Router Plane.................................. 76 Router Shark.................................. 10 Router Table Sled........................... 26 Router Tables........................... 24, 25 Router Table Inserts....................... 31 Rules ...................................65-68 Rust Prevention........................ 28, 74 Ryoba Saws.................................. 72 S Saddle Squares.............................. 65 Safety Kit....................................... 28 Salt and Pepper Parts................... 133 Sanding Accessories................ 36, 37 Sanding Blocks.............................. 37 Sanding Drums.............................. 36 Sash Clamps................................. 88 Saw Benches..............................8-10 Saw Blades, Circular............ 106, 107 Saw Guide..................................... 27 Sawtooth Bits.............................. 112 Scissors........................................ 74 Scorp .............................. 125, 129 Scrapers.......................... 144, 80, 81 Scraper Burnisher.......................... 80 Scraper Holder............................... 80 Scraper Plane................................ 78 Scraper Set.................................... 81 Screwdrivers.................................. 74 Screw Extractor............................ 114 Screws .............................. 121, 138 Scribers ............................ 63, 64, 65 Scroll Saws................................... 11 Scroll Saw Blades.......................... 11 Shapers ........................................ 25 Shaper Cutters............................. 105 Shaper sled.................................... 26 Sharpening...............................80-86 Shears (Japanese)......................... 70 Shear Brake................................... 59 Shellac ............................... 123-124 Shelving ........................................ 56 Shop Vacs..................................... 94 Side Rabbet Plane.......................... 76 Silverglide...................................... 28 Site Saw.......................................... 8 Skew Rabbet Plane........................ 76 Skilton Sander................................ 45 Sled (Shaper)................................. 26 Slipstones.................................82-83 Sorby ............................ 41, 69, 70 Spade Bit Set............................... 111 Specials ............................... 139-144 Speed Clamps................................ 90 Spindle Moulders........................... 25 Spindle Sanders............................. 22 Spiral Push Drill........................... 110 Spokeshaves................................. 81 Spray Guns.................................. 122 Spur Drives.................................... 44 Square Drive Screws.................... 121 Square Fence................................. 66 Squares ...................................64-68 Squirrel Tail Planes......................... 79 Stands (Mitre Saws).................26-27 Stebcentre............................... 41, 44 Stone Pond.................................... 83 Storage ........................................ 56 Storage Boxes................................ 56 Straight Edge................................. 68 Strop, Leather Wheel...... 86, 130, 132 Suva Guard.................................... 26 Suspenders.................................... 56 Swivel Vise.................................... 62 T T-Bar Clamps................................. 88 T-Slot Tracks.................................. 34 Tablesaws...................................8-10 Table Sled...................................... 26 Tap & Die Set................................. 60 Tape Measure................................ 68 Tape Tip ........................................ 66 Taper Cutting Jig............................ 26 Taper Gauges................................. 64 Techniglue................................... 124 Teknatool....................40, 42, 43, 141 Tenon Saws................................... 72 Tenoning Jig........................... 26, 115 Thermometers............................. 136 Thicknessers........................... 16, 17 Thickness Gauge..........64, 65, 67, 68 Thread Box.................................. 119 Thread Cutting....................... 60, 119 Tile Drills...................................... 111 Titebond glue............................... 123 Toggle Clamps............................... 36 Tool Stand................................ 26, 27 Tormek grinders............................. 85 Toy Wheel Cutters........................ 114 Track For Mitre............................... 34 Trammel Points.............................. 63 Transfer Scribe............................... 64 Trimmer, Mitre Guillotine............... 119 TRITON ........................................ 96 TRU-GRIND................................... 45 Try Square, Japanese..................... 66 Turning Tools............................41-47 Twin Screw Vice............................. 87 U Ubeaut Polishes........................... 123 Undercut Router Bit........................ 34 Utility Knife.................................... 74 V V-Belt ........................................ 28 Velcro Sandpaper..................... 37, 45 Veneer Hammer............................. 71 Veneer Roller.................................. 71 Veneer Saw (Pax)........................... 72 Versaflo Starter Kit......................... 53 Videos .................................website Violin Makers Tools........... 78-80, 125 Vises: Carving................... 130, 131 Cross Slide....................... 89 Engineering....................... 62 Parrot............................. 136 Quick Release............. 87, 89 Swivel.............................. 62 Wood......................... 87, 89 Vix Style Bits................................ 110 W Walking Stick Parts...................... 138 Waterstones................................... 83 Weather Instruments.................... 136 West System Epoxy..................... 124 Wet Grinders.................................. 85 Whetstones.................................... 84 Wide Drum Sanders....................... 23 Wonder Dogs/Pups........................ 87 Woodcut Tools............................... 45 Wood Thread Box......................... 119 Woodfast....................................... 38 Woodturning: Calipers............................ 41 Chisels................. 41, 46, 47 Craft Accessories.... 133-138 Dust Masks...................... 53 Lathes.........................38-40 Woodworkers’ pencil...................... 63 Workbenches................................. 87 Work Gear...................................... 55 Work Lights................................... 54 Workshop Room Filters.................. 48 Z Z Saws Japanese........................... 72 Please see website for all terms and conditions of sale. Website pricing supercedes all printed pricing and advertising.
  • 5. A bandsaw is invaluable for cutting both curved and straight lines, re-sawing larger stock into veneers or even ripping a highly figured board in half to create a beautiful book-matched feature panel for a cupboard or guitar back. An added advantage is that there is very little wastage of your valuable timber and virtually no risk of the material being thrown back at you. Safety is always an issue with re-sawing, as timber can be unpredictable. With a well-tuned bandsaw you can cut very accurate joinery. There are a few essentials needed to achieve this. The blade tension is important; it needs to track well and has to be square to the table. Most people will start with a smaller saw, often a 14” bandsaw, but once the potential becomes obvious, chances are you are going to want to upgrade to a saw with larger capacity and more power. The JET-JWBS18Q is the perfect choice for someone who is looking for professional performance, but a machine that will fit into an average sized workshop. It has all the essentials, but not too many tricky gadgets. It’s simple, functional and very robust. JET have pioneered a super-rigid triangular column technology that reduces rotational deflections by an amazing 65% over the common box type construction. This delivers maximum strength and rigidity in the column, preventing any twisting or flexing. The upper and lower cabinets are made from heavy gauge steel that is precisely formed and then fully welded to the triangular column. This heavy-duty cabinet construction provides an exceptionally stable platform for the blade wheel mounts, tensioning and drive systems. The distinctive blade tensioning lever has three settings: • A quick release to ease off the blade tension when the saw is not in use. • A full release setting to change the blade. • A tension setting that is monitored using a blade tension scale. The 18” wheels are precision machined and computer balanced so their weight adds a flywheel effect to smooth the cutting action without inducing vibration. Each wheel is fitted with a high quality tyre that helps keep the blade tracking straight and running smoothly. A large 485mm x 485mm cast iron table allows plenty of support for your workpiece; the twin trunnions are cradled by heavy- duty zinc alloy saddles, so the table tilts smoothly to any angle between 0° and 45°. There is a generous 300mm cutting depth and the blade guides and support bearings are independently adjustable with micrometer accuracy, providing smooth faultless support to the blade. There is also an option to purchase the popular European blade guide assembly. The saw can accommodate blade widths from 3mm to 34mm. Included with the JET-JWBS18Q is a mitre gauge and a quick release precision T-square style rip fence that is fitted with a removable re-saw post. This is the bandsaw to take your woodworking forward and expand your horizons. With a hefty 2HP motor, it will give you the capacity to make the most out of that most valuable of resources - the timber in your shed! To see more about this and the other bandsaws in our range see pages 12 & 13 or go to our website at www.carbatec.com.au. JET-JWBS18Q A Bandsaw For All
  • 6. The festival, held every second February, is a lively gathering of people and boats from Australia and around the world. Over 600 wooden boats and thousands of people converged on Hobart for four perfect sunny days to revel in the beauty of these fine craft. Dozens of exhibits featuring demonstrations of traditional woodcraft by shipwrights and artisans as well as displays of tools and materials. There was an extensive program of lectures by historians, boat builders, adventurers and eccentric dreamers that tantalised the imagination. The imagery of wooden boats is highly evocative and romantic. They symbolise a freedom that seems to be elusive in modern life. I must confess to feeling sheer unabandoned joy, standing on the deck of the 100 year old wooden steamship - the MV Cartela, as we motored alongside ‘the parade of sail’, an event where participating boats sail together up the Derwent River into Hobart to mark the opening of the festival. The Rusich, a replica Slavic Viking ship built in Russia, sailed all the way from Vladivostock as a tribute to Russian scientist and explorer Nicholas Miklouho- Maclay, who came to Australia in 1878. At 15 metres long and in no way luxurious, the only concession to modern life on the Rusich is the gas cooker and compulsory satellite navigation. The journey took two years and there was serious concern that the ship would not make it to the festival. After an emergency stop off in Brisbane to undergo some essential repairs. The crew received a hero’s welcome and celebrated their success with great enthusiasm. With a long established maritime culture, Hobart is ideally suited to hosting the festival. In addition, the region boasts many skilled craftspeople and is known a a centre for excellence in boatbuilding. The presence of the Franklin Wooden Boat Centre, which runs a wide range of classes, has drawn in many would-be shipwrights as well as highly skilled craftspeople. Tasmania’s unique native timbers stand up well to the marine environment, Huon Pine, King Billy Pine, Celery Top and Tasmanian Blue Gum are some of the world’s most prized boatbuilding timbers and have a legendary status that is only increased by their diminishing availability. Carba-Tec® ‘s Carol Russell and photographer, Donovan Knowles, visited the MyState Wooden Boat Festival in Hobart and discovered a vibrant community committed to keeping a long tradition of wooden boatbuilding and sailing alive. Carol and Donovan received some exceptional hospitality on land and at sea and over the following few months we will post a series of stories on our website about boatbuilding, restoration and the characters they met. “Built with volunteer labour, using salvaged and recycled material.” The Windeward Bound Huon Pine Natural Elbows Bruce Miller with a Fazackerley Dinghy A Celebrationof WoodenBoatsBy Carol Russell
  • 7. The first of many wooden ships to sail up the Derwent River was the Lady Nelson in 1803. She was a double-masted, square rigger known as a ‘Brig’. Aboard were the crew and first settlers, as well as ten convicts and three soldiers, that had been sent to Van Dieman’s Land. The original ship was lost with all its crew in 1825, after it was captured by pirates near Timor. The replica that appeared at the festival was built in 1988 using Tasmanian Blue Gum for the keel and frames, Celery Top Pine decking and masts of Oregon Pine grown in Tasmania. The Lady Nelson is based in Hobart and was one of the stars of the show during the festival, along with the restored James Craig, the beautiful Brigantine Windeward Bound and the Enterprize from Melbourne. The story of how the Windeward Bound came to be is one of great tenacity and belief. The ship was built by the captain, Sarah Parry and a small group of volunteers in the 1990s.The hull is strip planked Swamp Gum and is constructed entirely from salvaged and recycled material that Sarah and her crew were able to collect. Much of it came from old timber ships awaiting demolition. By the end of the four days, it felt as though some of the people and the boats at the festival were becoming old friends. There are many clubs and community groups that work to faithfully resurrect and maintain Australia’s maritime heritage. There is a list of these groups on our website so if you feel compelled to look them up, I strongly encourage you to do so. At the very least you will meet some interesting people. Go to the Develop and Discover section of our website for more stories and images. The ship is based in Hobart and is now a sailing training vessel and has guided many young people into a maritime career. The crew work with many of the city’s troubled youth to help restore a sense of belief in themselves. Sarah explained that she always knew that this was the real purpose of the Windeward Bound. Attheoppositeendofthescale,theMaritime Museum in Hobart mounted a display of exceptional clinker-built dinghies by prolific local boat builder Reg Fazackerley. These dinghies epitomise the romantic image of traditional wooden boats with their curved planks, ribs and copper roves. It is believed that Reg built over 100 vessels, the first when he was only 16 years old. They were built using only hand tools and he worked entirely by eye. Peta Knott of the Maritime Museum of Tasmania has been researching the life and work of Fazackerley. His boats are highly prized and are now collector’s items with significant value. The main characteristics of his dinghies include Huon or King Billy Pine planks and no ribs forward of the thwart. (cross brace that also serves as a seat). The nails are typically clenched below the thwart riser, then roved above it. One very endearing feature is the oak knees that act as braces, they are cut from naturally grown timber to utilise the strength of the curved wood grain that grows in tension or compression and give support where there is a natural bend or crook in a tree. Using the properties naturally present in the timber is a very traditional method of construction and marks this style of boatbuilding apart from the more contemporary approach of laminating. Reg’s dinghies also have a distinctive curvature to the transom, but most telling of all, he usually signed and dated each one with the initials R.F. under one of the seats. After a presentation by Peta Knott about the work of Reg Fazackerley, we met Bruce Miller who built a clinker dinghy in 1967 under Reg’s tutelage. Bruce told the wonderful story of the process they went through together to build his one and only boat. He still owns it today and remembers the experience with great fondness. The dinghy has become a significant part of his family’s history. The Rusich’s Bow Original Dinghy Built by Reg Fazackerley
  • 8. Project: D5 Plywood Dinghy by Donovan Knowles “The heart of adventure continues to beat within me. My other passion is boats, big or small, generally small invigorates a sense of youthful escape.” At Carba-Tec® there are a few of us abuzz with the wooden boat bug. Several of the staff have projects on the go, ranging from the half models, as seen in catalogue edition #14 (available on our website), to working models, canoes and boats. There are a few already completed and you may be fortunate enough to see them in one of our stores. If not, drop by your local small boat plan and product retailer. After selling off the small fibreglass sailer I owned I decided to start a project to keep my hands busy. I settled on a small dinghy to begin with due to size versatility and ease of build. This little D5 is suited to rowing, sailing or even a small motor. Although this plan is from overseas, there are a variety of small boats, plans and kits available from stores thoughout Australia. Plywood construction of timber boats opened up the craft to everyone. Any outdoor ply would be suitable, but for around $180 I was able to pick up 2 x 6.5mm sheet and 1 x 9.5mm pink hardwood marine ply (and it’s not pink). You may need another half sheet for the seats and tops, depending on which version you choose. The fantastic thing about the plans that are available, is that there is a wealth of knowledge and assistance available. Therefore, if you are a beginner and feeling a bit daunted by the concept, don’t fear, help is at hand. I built mine in the garage, a little to my wife’s displeasure but within a couple of weeks I was able to free up space for the car to park indoors once again. I’ve heard and read stories of boats being constructed in bedrooms, apartments, even the lounge (try to get that one through management!). Whether you choose to build a canoe, dinghy or sharpie, once you loft it out (draw it out on the ply) and cut it up there will be a boat shaping up before you know it. I used the stitch and glue method, which involves drilling holes either side of the pieces to be joined and then zip tying or copper wiringt hem together, before using fibreglass tape and epoxy to seal and hold the boat. To see Donovan’s step-by-step instructions on building the D5 Dinghy, go to www.carbatec.com.au The following websites are highly recommended for plans and supplies: • www.straydogboatworks.com • www.boatcraft.com.au
  • 9. Teknatool® Teknatool® Leaders in Innovation Teknatool® International and their renowned ‘Nova’ brand have been synonymous with woodturning for over thirty years in Australia, New Zealand and around the world. Carba-Tec® are proud distributors of Nova products. Nova offers a wide range of wood lathes, chucks and accessories for craft woodturners. Many of their early TL1000 lathes are still in use today - a testament both to their quality and an innovative design approach. The family company based in Auckland (now also with company operations in China and USA) branched out into making parts for woodworking manufacturers in the 1970’s.They realised that lathes had not kept pace with the advances in other types of woodworking equipment and saw a product opportunity, not only in New Zealand, but also in Australia, Canada, UK, USA and many other markets. Teknatool’s Brian Latimer, director of sales and marketing explains that, “where others may take a more traditional approach to woodturning and woodworking, we never have. We constantly throw out preconceived notions and start with a clean slate. We love to involve ourselves with the woodturning community, especially in New Zealand and Australia”. This attitude has helped make Teknatool® a benchmark product and won them a large following of loyal customers worldwide. This is partly due to the fact that all new Nova products offer retrospective compatibility wherever possible, allowing customers to upgrade and still use their existing accessories. The famous Nova Chucking System was introduced towards the end of the 1980’s and created a revolution in workpiece securing for the hobbyist woodturner. It earned Teknatool® the recognition of developing ‘one of the top 25 woodworking innovations worldwide, over the last quarter century’, as awarded by Wood Magazine USA, 2009. More recently, Nova has expanded into a range of chucks and accessories for every scope of lathe and woodturning project. This includes the powerful SuperNova2, with advanced precision jaw slides. This provides a huge range of work-holding solutions and remains the most popular chuck with woodturners. New Teknatool® innovations include: • The first insertable tip chisels, • Adjustable and modular extended beds, • Sharpening systems, • Refined swivel head lathe designs. Furthermore, Brian explains that lathe drive technology had not changed much since the electric motor was attached to the lathe by pulleys and belts in the 19th Century. “We knew we would need to develop our own drive system to improve the performance, safety and efficiency of lathes. The result, our DVR motor technology, is a complete departure from traditional electric motors and mechanical speed control systems. We deliver complete variable speed over the entire range. This system saves energy, because it uses only the exact amount needed. Best of all, the onboard computer monitors the cutting resistance and shuts the motor down if the force exceeds safety parameters. This detects “Dig Ins” and cuts motor power instantly to help minimize the chance of injury and damage.” Their latest 20”, Nova 2024 DVR lathe is a quality, high performance machine, as demonstrated by the following features: • Large capacity, yet compact workshop footprint, • 20”inboard capacity (30”outboard), • 2.3 HP of smooth, direct drive with no belts or pulleys, • Breathtaking speed range of 100 to 5,000 rpm. Standard equipment also includes: • 10 ‘favourite’ programmable speeds for faster set ups, • A wristwatch style wireless controller, which gives you the ultimate stop, start, speed control for any project, from a pen to a 25” bowl and larger. “No other lathe comes close to this level of finesse and overall performance” says Brian. Another smart performer is their new Nova Comet II Midi Lathe. Perfect for all small turning work and the home enthusiast. To see the full range of Teknatool® , as well specials available at Carba-Tec® , go to www.carbatec.com.au.
  • 10. For more information & to shop online go to www.carbatec.com.au8 Machinery - Table Saws JET 10” PROSHOP TABLESAW JPS10TS EXCLUSIVE 30” ProShop fence system with T-square design Integrated arbour lock allows for quick, safe and easy blade changes. Heavy-duty cast iron table with T-style mitre slot provides large flat work surface and increased cross cut capacity. CARBA-TEC® 10” CABINET SAW MJ2325CT This saw represents good value not only in the saw itself but also in the accessory pack that converts the saw into a sliding table saw. 15A plug requires 15A circuit. CARBA-TEC® PORTABLE SITE SAW CSB-315 Rugged all-steel site or workshop saw. Wheels and handles make for easy manoeuvring around the workshop and the legs fold up. Includes both rear and side extension tables and full width rip fence. 15A plug requires 15A circuit. Specifications CSB-315 MJ2325CT CTJ-650 JET-JPS10TS Motor 230v 10A 3hp, 230v, 15A 1-1/2hp, 230v 1300w 230V 10A Motor Type Induction Induction Induction Induction TEFC Motor Speed 2800rpm 2850rpm 2880rpm 4000rpm Drive Type Direct Drive Single belt Single belt Belt Blade Diameter 315mm 254mm 250mm 250mm Dado Capable? No No 19mm max. 20mm Arbor Diameter 30mm 30mm 5/8” 5/8” Max. Cut at 90° 95mm 75mm 83mm 80mm Max. Cut at 45° 65mm 60mm 58mm 54mm Max Rip Cut 780mm 960mm Left 350/Right 770mm 800mm Max Crosscut 550mm Up to 1220mm 550mm 500mm Table Size (WxD) 550 x 800mm 1170 x 1440mm 1020 x 685mm 1118 x 686mm Table Height 810mm 870mm 890mm 883mm Blade to Table Front/Rear 260mm/1050mm 360mm/860mm 320mm/130mm 250mm/170mm Blade Guard Opaque, Tilting Opaque, Tilting Clear/Tilting Clear/Lifting Riving Knife Style Rise & Fall Splitter Rise/Fall Splitter Fixed, Anti-kickback Rise/Fall splitter Switch Type Magnetic Starter NVR Switch Magnetic Starter NVR Switch Mechanical With Safety OFF Mechanical With Safety OFF Stand Type Open Base Enclosed Cabinet Open Base Open Base Dust Port 1 x 4” 1 x 4” 1 x 4” (100mm) 100mm Workshop Footprint 1470x2000x1000mm 2220 x 2000 x 1100mm 1440 x 1100 x 1050mm 1520 x 960 x 1100mm Shipping Dimensions 1280 x 660 x 420mm 139x35x19mm + 84x64x62mm 1200 x 670 x 540mm 770x760x750mm + 1600x120x120mm + 940x415x190mm Shipping/Net Weight 60/56kg Machine 211/100kg, table 49/45kg 110/90kg 120/13.9kg Opt. Sliding table CARBA-TEC® 10” CONTRACTOR’S TABLE SAW CTJ-650 Cast iron construction make this saw a solid performer for the en- thusiast. Made in the contractor’s style of saw, it is easily portable. A quality fence and emergency paddle STOP switch are a plus. Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price JET-JPS10TS $1,499.00 Order no. Description Price MJ2325CT 10” Cabinet Saw $1,299.00 MJ2325CTSP Sliding Table $749.00 Order no. Price CSB-315 $589.00 Order no. Price CTJ-650 $959.00
  • 11. Want to see more? See our website for our full range of products. 9 Machinery - Table Saws/Cabinet Saws Specifications TSC-10HB JET-JTAS10LDX JET-JTS600M CT-PS1600-1PH Motor 3hp, 230v, 15A 2600w 230v 15A 3hp, 230v, 50Hz 3hp, 230v, 15A Motor Type Induction Induction Induction Induction Motor Speed 2850rpm 4200rpm 4000rpm 4000rpm Drive Type Triple Belt Poly-V Belt N/A Single Belt Blade Diameter 250mm 250mm 254mm 305mm Dado Capable? 15mm Max. 20mm No N/A Arbor Diameter 5/8” 5/8” 30mm 30mm Max. Cut at 90° 77mm 76mm 80mm 100mm Max. Cut at 45° 58mm 54mm 54mm 80mm Max. Rip Cut Left 255/Right 695mm 300mm 610mm 1200mm Max. Crosscut 550mm 1250mm 660mm 1600mm Table Size (WxD) 1015 x 685mm 508 x 686mm 1500x1230mm 1260 x 800mm Table Height 860mm 863mm 850mm 880mm Blade to Table Front/Rear 305mm/150mm 254mm/254mm 300mm/680mm 350mm/675mm Blade Guard Clear, Tilting Clear, Tliting Opaque, Tilting Clear, Tilting Riving Knife Style Fixed, anti-kickback Fixed Height Rise/Fall Splitter Rise/Fall Splitter Switch Type Magnetic Contactor Magnetic Contractor Magnetic Starter NVR Switch Magnetic Contactor Stand Type Enclosed Cabinet Enclosed Cabinet Enclosed Cabinet Enclosed Cabinet Dust Port 1 x 4” 100mm 100mm 1 x 4” & 1 x 2-1/2” Workshop Footprint 1480 x 1110 x 980mm 2140 x 990 x 1000mm 3130 x 1680 x 1040mm 3900 x 3400 x 1000mm Shipping Dimensions 660 x 880 x 1260mm (machine) + 80 x 120 x 1530mm (rails for fence) 750 x 800 x 1070mm (machine) + 1360 x 520 x 4600mm (rails for fence) 87x68x69mm + 138x41x14mm + 90x53x17mm 936 x 756 x 1640mm Shipping/Net Weight 195/1990kg 205/186kg 167/153kg 255/210kg CARBA-TEC® 12” SLIDING TABLE PANEL SAW WITH SCRIBER BLADE An economy 12” panel saw with all the features. Comes complete with 1.6m sliding table travel, scribing blade, table extension and overhead dust extraction saw guard. Note: 15A plug requires 15A circuit. CARBA-TEC® 10” HEAVY DUTY CABINET SAW A machine for any workshop. Powerful motor and excellent build quality make this unit value for money as well as precise and a superior performer. Includes router wing (router not included). 15A plug requires 15A circuit. Ute/Trailer Pickup Ute/Trailer Pickup JET 10” SLIDING TABLESAW WITH OUTRIGGER Cast iron table enables accurate cuts. Sturdy rip fence with inte- grated micro-adjustment on round bar rail. Sliding table made of extruded aluminium, precision machined and anodized. Outrigger table 460 x 600mm with telescopic arm and pull out mitre fence 2200mm Note: 15A plug requires 15A circuit. Basic ripping blade included. Ute/Trailer Pickup JET 10” LEFT TILTING ARBOR XACTA TABLESAW Cast iron wings to increase work surface and support area. Exclusive 50” commerical Xacta Fence II. Three matched V-belts deliver full power to the blade. See-through blade guard with splitter and anti-kickback fingers helps protect operator while giving a clear view of the material being cut. Mitre gauge with adjustable positive stops. Includes table board and support legs Ute/Trailer Pickup Order no. Description Price TSC-10HB 10” Heavy Duty Cabinet Saw $1,899.00 TSC-10HBRF Router Fence to suit $219.00 TSC-10HBRW Router Wing to suit older model $139.00 Order no. Price CT-PS1600-1PH $2,595.00 Order no. Price JET-JTS600M $1,799.00 Order no. Price JET-JTAS10LDX $2,799.00
  • 12. For more information & to shop online go to www.carbatec.com.au10 Machinery - Cabinet Saws/CNC Machines 12” X SERIES PREMIUM SLIDING TABLE CABINET SAW SERIESPREMIUM PERFORMANCE The TS-12R has for years been the machine of choice for trade use and the discerning home user. Precision ground cast iron top, solid industrial rip fence and heavy internal construction are just three of its top features. This X series Premium model features a full sized sliding table assembly, allowing for a fully supported sheet size crosscut, plus massive ripping capacity on the right of the blade. This saw can have the optional RH table board and legs fitted to extend the table size. With the supplied dado extension, the TS-12RX series saws become the perfect choice for the professional looking to upgrade of the craftsmen simply wanting the best. This unit also available without sliding table assembly, see website for details. 15A plug requires 15A circuit. Specifications Motor 3hp, 230V or 5hp, 415V Motor Type Induction Motor Speed 2840rpm Drive Type Triple V-Belt Blade Diameter 12” Dado Capable? No Arbor Diameter Stepped 30mm w 5/8” Max. Cut at 90° 100mm Max. Cut at 45° 73mm Max Rip Cut 1270mm Max Crosscut Table Size (WxD) 1120 x 740mm Table Height 860mm Blade to Table Front/Rear 310mm/140mm Blade Guard Clear, Tilting Riving Knife Style Rise and Fall Splitter Switch Type Magnetic Starter NVR Switch Stand Type Enclosed Cabinet Dust Port 1 x 4” Workshop Footprint 2145 x 1210 x 1050mm Shipping Dimensions 76 x 86 x 96mm + 110 x 47 x 17mm + 223 x 11 x 11mm + 100 x 600 x 300mm + 196 x 16 x 10mm Shipping/Net Weight 265/255kg CNC ROUTER SHARK PRO PLUS © & PRO HD ­­­­­­­­­­Carba-Tec® are proud to distribute the CNC Shark Pro© PLUS and the CNC Shark Pro HD to the Australian market. By far these are the best value complete CNC systems available. They are made of steel, aluminium and high-density polyethylene construction which makes them robust yet light weight and very stable. Pro plus shown. Specifications Motor 550 watt 1/4” shank capacity router (supplied) Motor Speed 33,000rpm Maximum work size 635 x 635mm (unlimited length by repositioning) Travel X:605mm, Y: 605mm, (Pro Plus Z: 127mm) (HD Z: 177mm) Jog Control 3 speed via software - keyboard or keypad Bearings 12 linear bearings ( 4 on each axis) Interface USB2.0 with on controller memory storage capability Thread ACME precision threads Resolution Less then ±0.001” (±0.0254mm) Stepper Motor Specs 9.368 kg - cm 1.8° steppers Power supply to steppers 24 volt Software VCarve Pro 6.0 & Cut 3D software (included) PC requirements Win 2000, XP or Vista, Pentium 4, 2.0GHz - 1Gb RAM (2gb recommended) 1024x768 graphics display - 60mb free hard drive space Control Program Downloadable (free) Workshop footprint 900x900x550mm Shipping/Net Weight 42/39kg Both machines are shipped complete (with only very minimal as- sembly required), and are basically ‘Plug and Play’. Vectric’s VCarve Pro V6.0 Design Software is included with both models, and this pro- vides an easy to use point and click method of designing signs, patterns and complex repetitive cut jobs. Design work can be just as easily done in programs such as Corel Draw or Adobe Illustrator, in which you can export/import direct to VCarve Pro for tool path assignment and batch processing. VCarve Pro then creates the machine coding (G Code) required by the device driver interface (free download), to run the unit. The CNC Shark Pro Plus© and CNC Shark Pro HD© driver interface can also process files exported from other well recognised programs such as: Photo Carve, 3D Cut, Bob- Cad, BobART, BobNestCad, Mach 3 and Lazy Cam. They are pow- ered by an industrial duty 550W Bosch Blue GMR-1 router (included) and both units are supplied with hardware, transformer, controller, software, clamps, cables and router bit. All you need is a PC (or laptop), a USB port, a standard 3 pin appliance lead, some timber and an imagination. Get creative...the new age way! Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price CNC-SHARK-KIT-PP Shark Pro Plus $6,195.00 CNC-SHARK-KIT-HD Shark Pro HD $6,995.00 Order no. Price TS-12RX-1PH $3,795.00 TS-12RX-3PH $3,995.00
  • 13. Want to see more? See our website for our full range of products. 11 Machinery - Scrollsaws EXCALIBUR 21” PROFESSIONAL SCROLL SAW Excalibur has been at the fore- front of scrollsaw technology for many years. The brand is synonymous with excellence in design and execution. • Quick blade changes with finger operated blade clamps, no tools required. • Pivoting top arm for easy pin hole work. • Head tilts 45° left and right, tilting the blade, not the table, keeping the work piece level for better control and more accurate cuts. • Easy access speed and tension controls. • Organised blade storage on base. • Onboard dust blower. • Positive stops at common angles. • Very low vibration through all speed ranges. CARBA-TEC® 18” VARIABLE SPEED SCROLL SAW A high performance, low-vibration scroll saw with many features and benefits that will be of interest to the serious user. JET 16” SCROLL SAW • Variable Speed 400-1600spm for cutting various materials • Accepts pin blades and plain end blades • Big transparent blade guard and work- piece holddown for safety • Saw dust blower helps keep cutting line clean • Quick release blade tension knob allows quick and easy blade change SCROLL SAW BLADES Specifications JET-JSS16 CT-SS18V CTEX-21CE Motor 90w 230v 10A 120w, 230v 100w, 230v Throat 406mm 18” (450mm) 535mm Stroke 15mm 20mm 20mm Cuts per minute 400-1600/min 400-1400/min 400-1550/min Depth of Cut 50mm 65mm 53mm Table Size 410x253mm 460 x 235mm 345 x 597mm Table Material Aluminium Casting Cast Iron Plate Steel Table Tilt 0/45° Left 10°R to 45°L 0 to 45° Left and Right Blade Type Pinned & Pinless Pinned & Pinless Pinless Blade Length 130mm 130mm 130mm Blade Change Tool Change Quick Release Quick Release Dust Port 35mm Tapered-suits most N/A Overall Size 620x285x325mm 285x620x310mm 380x812x380mm Packing Size 670x340x390mm 700 x 360 x 400mm 910 x 420 x 510mm Shipping/Net Weight 15/11.6kg 32/29kg 36/32kg Order no. Description Price CT-SS18V Scroll Saw $619.00 CT-SS18V-CHUCK Chucks (Set) $12.00 CT-SS18V-103 Table Insert (each) $5.00 Order no. Price JET-JSS16 $149.00 Order no. Univ. No. Width Thick TPI Price PGTTM PRECISION GROUND TOOTH 5” - 6 BLADES PER CARD OLS-PG45502 - .040” .018” 12 9 Rev. $9.00 OLS-PG45702 - .046” .018” 10 7 Rev $9.00 OLS-PG45902 - .048” .018” 8 6 Rev $9.00 OLS-PG49502 - .045” .018” 12 $9.00 OLS-PG49702 - .048” .018” 10.5 8 Rev. $9.00 OLS-PG49902 - .048” .018” 9 6 Rev. $9.00 PINNED 5” BETWEEN PINS - 6 BLADES PER CARD OLS-FR424P - .070” .010” 18.5 $8.00 OLS-FR427P - .070” .010” 25 $8.00 OLS-FR410P - .100” .018” 7 $8.00 OLS-SC405P - .110” .018” 20 $8.00 OLS-SC411P - .110” .018” 15 $8.00 OLS-SC412P - .110” .018” 10 $8.00 OLS-FR420RP - .110” .018” 9 + 5 $8.00 PINLESS CROWN TOOTH 5” - 12 BLADES PER CARD OLS-CT620 - .024” .011” 20 $10.00 OLS-CT622 - .026” .013” 20 $10.00 OLS-CT623 - .032” .014” 16 $10.00 OLS-CT625 - .038” .016” 16 $10.00 OLS-CT627 - .045” .017” 11 $10.00 OLS-CT629 - .053” .018” 6 $10.00 OLS-CT632 - .065” .024” 6 $10.00 Order no. Univ. No. Width Thick TPI Price PINLESS SKIP TOOTH 5” - 12 BLADES PER CARD OLS-FR440 2/0 .022” .010” 28 $9.00 OLS-FR443 2 .029” .012” 20 $9.00 OLS-FR445 4 .035” .015” 15 $9.00 OLS-FR446 5 .038” .016” 12.5 $9.00 OLS-FR448 7 .045” .017” 11.5 $9.00 OLS-FR450 9 .053” .018” 11.5 $9.00 OLS-FR453 12 .062” .024” 9.5 $9.00 SPIRAL 5” PINLESS - 12 BLADES PER CARD OLS-SP461 0 .032” n/a 46 $10.00 OLS-SP463 2 .035” n/a 41 $10.00 OLS-SP465 4 .041” n/a 36 $10.00 GRIT 5” - PINLESS & PINNED - 2 BLADES PER CARD OLS-SD42100 .156” .056 fine $11.00 OLS-SD42101 .156” .056 fine $11.00 MACH SPEED BLADES OLS-FR643 .032” .014 13 7 Rev. $10.00 OLS-FR645 .038” .016 13 7 Rev. $10.00 OLS-FR647 .046” .017 8 6 Rev. $10.00 OLS-FR649 .055” .018 8 6 Rev. $10.00 Order no. Price CTEX-21CE $895.00 CTEX-21-STAND $109.00
  • 14. For more information & to shop online go to www.carbatec.com.au12 Machinery - Bandsaws CARBA-TEC® 10” BANDSAW The best choice when you only need a small bandsaw. Perfect for cutting small pen blanks or doing model making. With simi- lar features to a BAS-350B in a compact design the aluminium finned motor allows for cooler running. This is a feature usually found in larger saws. Includes stand, fence and mitre gauge. Specifications BAS-250B BAS-350B CTJ-3501 JET-JWBS14Q Motor 1/2hp, 230v 1-1/2hp, 230v 1hp, 230v 550w 230v 10A Cutting cap. (depth) 125mm 200mm 200mm 203mm Cutting cap. (width) 245mm 345mm 345mm 340mm Max. ripping 118mm 205mm 300mm 350mm Table size 330 x 350mm 550 x 400mm 360 x 360mm 385x500mm Table tilt 0°-45° -5° - +50° -15° - +45° -10° to +45° Table height 370/1010mm 1060mm 1070mm 1016mm Positive stops 0° Adjustable 0° Adjustable 0° Adjustable 0° Adjustable Wheel type Cast alloy Cast Iron Cast alloy Cast Aluminium Wheel diameter 255mm 350mm 350mm 355mm Blade length 1785mm 2490mm 2553mm 2557mm Blade guides Ball Bearing with Manual Raise/Lower Ball Bearing with Manual Raise/Lower Ball Bearing with Rack & Pinion Crank Bearing Blade release Standard Tension Release Std. Tension Release Quick Release Lever Action Quick Release Min. saw blade width 1/8” (3.2mm) 1/8” (3.2mm) 1/4” (6.35mm) 3mm Max. saw blade width 1/4” (6.35mm) 3/4” (19mm) 5/8” (16mm) 19mm Switch type NVR Push Button NVR Push Button Mechanical Push Button Magnetic Switch Dust port 1 x 2-1/2” 1 x 4” 1 x 4” 100mm Workshop footprint 630 x 480 x 1500mm 740 x 580 x 1740mm 710 x 710 x 1760mm 710 x 710 x 1760mm Shipping/Net Weight 35/32kg 70/65kg 85/77kg 121/93kg CARBA-TEC® 14” BANDSAW A heavy duty 14” bandsaw with features usually found on indus- trial models, including rack and pinion height adjustment with scale, professional rip fence with magnified hairline cursor, quick release blade change, 4” dust extractor port, hinged wheel covers, micro-adjustable ball bearing blade guides with rack and pinion height adjust- ment plus a sturdy heavy duty stand. CARBA-TEC® 14” 2 SPEED BANDSAW Suitable for high speed wood cutting as well as low speed light duty cutting of non-ferrous metals. This bandsaw has a sol- id, machined aluminium hous- ing that is secured by a keyed slot and heavy bolt. Includes rip fence and mitre gauge, 100mm dust outlet, hinged wheel cov- ers, micro-adjustable blade guides and heavy duty stand. JET 14” INDUSTRIAL BANDSAW - JWBS14Q • Exclusive quick-clamping lever for easy blade release • Rack & pinion upper blade guide adjustment for ac- curacy • Ground & polished cast iron table, tiltable -10°/ 0°/+45° • Upper and lower blade guides extend blade life. Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price BAS-250B $359.00 Order no. Price BAS-350B $679.00 Order no. Price CTJ-3501 $899.00 Order no. Price JET-JWBS14Q $1,249.00
  • 15. Want to see more? See our website for our full range of products. 13 Machinery - Bandsaws Specifications JET-JWBS16X JET-JWBS18Q SBW-5300CE (21”) Motor 1100w 230v 10A 1500w 230v 10A 3hp, 230v Cutting cap. (depth) 250mm 300mm 300mm Cutting cap. (width) 405mm 460mm 514mm Max. ripping 364mm 419mm 475mm Table size 430x430mm 485 x 485mm 685 x 540mm Table tilt -10° ~+45° -10° ~+45° -10° - +45° Table height 890mm 950mm 950mm Brake System Electromechanical Electromechanical 0° Adjustable Wheel type Cast Iron Cast Iron Cast Iron Wheel diameter 420mm 470mm 530mm Blade length 3125mm 3480mm 3865mm Blade guides Bearing Bearing Ball Bearing with Rack & Pinion Crank Blade release Turn Handwheel Quick Release Quick Lever Action Min. saw blade width 3mm 3mm 1/8” (3.2mm) Max. saw blade width 25mm 34mm 1-1/4” (32mm) Switch type Magnetic Switch Magnetic Switch Key Lock NVR type Dust port 100mm 100mm 2 x 4” Shipping/Net Weight 187/150kg 205/170kg 196/163kg JET 16” BANDSAW - JWBS16X • Extra large cast iron table, tilts each side and is sup- ported by large trunnions • Dual tapered column design for rigidity and strength • Built-in cutting height scale to read the exact depth of cut • Precision T-style fence assembly • No volt release on/off switch for safety • Precision computer bal- anced wheels • Wide blade capacity for resawing large stock • Upper and lower precision blade guides JET 18” BANDSAW - JWBS18Q • Dual-function quick blade tensioning lever to release the blade tension when not in use and for easy blade changing • Built-in cutting height scale to read the exact depth of cut • Guides and support bear- ings adjust independently with micrometer accuracy. • The trunnions are cradled by a heavy-duty zinc alloy saddle, so the table tilts smoothly • Quick lock knobs secure upper and lower hinged covers. INDUSTRIAL BANDSAW This industrial band- saw has all the fea- tures! Extra heavy solid, not spoked, cast iron wheels, increased table sizes, higher rip fences, powerful in- duction motors, NVR type safety switches, door cut-out micro switches, blade tracking win- dows, micro-adjustable table tilting.Combined with industry leading specs these bandsaws are at the top of their class. All this AND a 5 Year Warranty!! No other saw even comes close. Exclusive features package available only from CARBA- TEC® . 15A plug requires 15A circuit. BANDSAW BLADES *BBL-2680-3-14suitsSW-1401withriserkitonly. Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price JET-JWBS16X $1,749.00 Order no. Price JET-JWBS18Q $1,999.00 Order no. Price SBW-5300CE $2,369.00 Order no. Width TPI Price 9” Length 1510mm Suits DE-28-150, BS-9 BBL-1510-3-14 3mm 14 $35.00 BBL-1510-6-6 6mm 6 $19.00 BBL-1510-10-6 10mm 6 $19.00 10” 1785mm long, Suits BAS-250B, CV-83210 BBL-1785-3-14 3mm 14 $35.00 BBL-1785-6-6 6mm 6 $19.00 BBL-1785-6-10 6mm 10 $19.00 BBL-1785-10-6 10mm 6 $19.00 14” 2375mm long. Suits SW-1401, SBW-3501, BS-14 BBL-2375-3-14 3mm 14 $40.00 BBL-2375-6-4 6mm 4 $19.00 BBL-2375-6-6 6mm 6 $19.00 BBL-2375-6-10 6mm 10 $19.00 BBL-2375-6-24 6mm 24 $19.00 BBL-2375-10-4 10mm 4 $19.00 BBL-2375-10-6 10mm 6 $19.00 BBL-2375-10-10 10mm 10 $19.00 BBL-2375-10-24 10mm 24 $19.00 BBL-2375-13-3 12mm 3 $19.00 BBL-2375-13-4 12mm 4 $19.00 BBL-2375-13-6 12mm 6 $19.00 BBL-2375-13-8 12mm 8 $19.00 BBL-2375-13-10 12mm 10 $19.00 BBL-2375-13-24 12mm 24 $19.00 BBL-2375-16-3 16mm 3 $27.00 BBL-2375-16-4 16mm 4 $27.00 BBL-2375-20-3 20mm 3 $30.00 14” 2490mm long, Suits BAS-350B BBL-2490-3-14 3mm 14 $42.00 BBL-2490-6-6 6mm 6 $20.00 BBL-2490-6-10 6mm 10 $20.00 BBL-2490-10-10 10mm 10 $20.00 BBL-2490-13-6 12mm 6 $20.00 BBL-2490-20-3 20mm 3 $31.00 14” 2553mm long. Suits CTJ-3501 BBL-2553-3-14 3mm 14 $42.00 BBL-2553-6-6 6mm 6 $20.00 BBL-2553-10-6 10mm 6 $20.00 BBL-2553-13-4 12mm 4 $20.00 BBL-2553-13-6 12mm 6 $20.00 BBL-2553-16-4 16mm 4 $28.00 BBL-2553-20-3 20mm 3 $31.00 14” 2680mm long, *Suits SW-1401, SBW-3501 BBL-2680-3-14 3mm 14 $44.00 BBL-2680-10-4 10mm 4 $21.00 BBL-2680-10-6 10mm 6 $21.00 BBL-2680-10-10 10mm 10 $21.00 BBL-2680-16-3 16mm 3 $29.00 BBL-2680-16-4 16mm 4 $29.00 BBL-2680-20-3 20mm 3 $32.00 17” 3335mm long, Suits SBW- 4300CE BBL-3335-6-6 6mm 6 $27.00 BBL-3335-13-6 13mm 6 $27.00
  • 16. For more information & to shop online go to www.carbatec.com.au14 Machinery - Jointers CARBA-TEC® INDUSTRIAL 12” LONG BED JOINTER Fitted with superior parallelogram system for easy and accurate table adjustment. Rack and pinion fence adjustment and high mounted switch for safe and easy operation. Perfect for the large workshop or in heavy production environment. 15A plug requires 15A circuit. CARBA-TEC® 6” HEAVY DUTY JOINTER A truly professional machine suitable for any DIY or trade workshop. Features a 1hp mo- tor, fully enclosed cabinet, dust chute, integral mobile base, centre-mounted heavy-duty rack and pinion fence, three- knife cutterhead and paddle- style stop switch. CARBA-TEC® 6” INDUSTRIAL LONG BED JOINTER Perfect addition to any workshop. The extra bed length in this machine make it as accurate and true without being too cramped for space. CARBA-TEC® INDUSTRIAL 8” LONG BED JOINTER Simply the best jointer in its class bar none! Extra long 1950mm bed for stock support, and superior parallelogram system for easy and accurate table adjustments. This system also produces less chipping as the tables follow the arc of the cutterblock when raising or lowering the table. It also makes for more positive adjustment and there is no slack as found with ordinary screw type adjustment wheels. A centre-mounted, tilting fence provides solid support, and a triple blade cutterhead gives a smooth cut at 16,500 cpm. CARBA-TEC® 6” BENCHTOP JOINTER Built with cast iron construction, this jointer provides big machine table and fence features in a portable size. Specifications TB-6 CTJ-196 CTJ-150 CTJ-350 CTJ-360-1PH Motor 1-1/2hp, 230v 1hp, 230v 1hp, 230v 1-1/2hp, 230v 3hp, 230v Table length 730mm 1180mm 1410mm 1950mm 2120mm Table width 155mm 170mm 152mm 200mm 320mm Rabbeting Capacity N/A 15 x 152mm 15 x 152 17 x 200mm 20 x 300mm Fence tilt -45° to +45° -45° to +45° -45° to +45° -45° to +45° -45° to +45° Fence stops -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° Cutter knives 2 3 3 3 3 Workshop Footprint N/A 1180x710x960mm 1410x600x1310mm 1950 x 670 x 1310mm 2120 x 990 x 1060mm Shipping/Net Weight 45/42kg 116/105kg 150/135kg 245/230kg 470/440kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price TB-6 6” Benchtop Jointer $349.00 BLADE-TB6 HSS Blades to suit TB-6 $35.00 Order no. Description Price CTJ-350 8” Long Bed Jointer $1,369.00 BLADE-8 8” HSS Blades set of 3 $43.00 BLADE-8-T 8” HSS with 18% Tungsten set of 3 $55.00 CTJ-360-BLADE 12” HSS Blades set of 3 $105.00Order no. Description Price CTJ-196 6” Heavy Duty Jointer $689.00 BLADE-6 6” HSS Blades set of 3 $30.00 BLADE-6-T 6” HSS with 18” Tungsten set of 3 $43.00 Order no. Description Price CTJ-150 6” Industrial Long Bed Jointer $849.00 BLADE-6 6” HSS Blades set of 3 $30.00 BLADE-6-T 6” HSS with 18” Tungsten set of 3 $43.00 Order no. Description Price CTJ-360-1PH 12” Long Bed Jointer $3,369.00
  • 17. Want to see more? See our website for our full range of products. 15 Machinery - Jointers SPIRAL HEAD INDUSTRIAL 8” LONG BED JOINTER SPIRAL HEAD INDUSTRIAL 12” LONG BED JOINTER SERIESPREMIUM PERFORMANCE The Spiral Advantage • Smoother cuts • Less tearout, vibration & machine wear • Less noise • Long life fine grain carbide • Fully indexed cutters • Better chip ejection • Rapid cutter change • Dynamically balanced head • Four rotatable cutting edges SPIRAL HEAD INDUSTRIAL 6” LONG BED JOINTER Specifications CTJ-150X CTJ-350X CTJ-360X-3PH Motor 1hp, 230v 1-1/2hp, 230v 3hp, 230v Table length 1410mm 1950mm 2120mm Table width 152mm 200mm 320mm Rabbeting Capacity 15x152 17 x 200mm 20 x 300mm Fence Tilt -45° to +45° -45° to +45° -45° to +45° Fence Stops -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° Dust Port 1 x 4” 1 x 4” 1 x 4” Cutterhead spiral 30 Insert Knives 40 Insert Knives 52 Insert Knives Workshop footprint 1410 x 600 x 1310mm 1950 x 670 x 1310mm 2120 x 990 x 1060mm Shipping/Net Weight 150/135kg 245/230kg 470/440kg JET 6” JOINTER • Exclusive front mounted table adjustment dials for convenient and superb accuracy. • Large cast iron tables with a precision ma- chined finish will ensure accuracy. • Conveniently mounted centre fence controls allow quick adjustment. Specifications Motor 750w 240v 10A Table length 1422mm Table width 187mm Rabbeting Capacity 12mm Fence tilt ±45°/90/-45° Fence Positive stops Left & Right 45° & 90° Cutter knives 153x19x1.98mm Workshop Footprint 1422 x 500mm Shipping/Net Weight 117/108kg JET 8” JOINTER • Extra long, large, cast iron tables feature a precision machined finish to ensure accuracy. • Dovetailed table ways allow adjustment for continued accuracy. • Rabbeting ledge is built into the table for versatility. • Sound reducing table lips on both sides of the cutterhead reduce noise. • Requires 15amp power. Specifications Motor 1500w 240v 10A Table length 1690mm Table width 228mm Rabbeting Capacity 12mm Fence tilt 45°/90/-45° Fence Positive stops Left & Right 45° & 90° Cutter knives 203x17.4x3mm Workshop Footprint 1690x750mm Shipping/Net Weight 230/189kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price JET-JJ6CSDX $899.00 Order no. Price JET-JJ8CS $1,499.00 Order no. Description Price CTJ-360X-3PH 12” Jointer $4,095.00 Order no. Description Price CTJ-350X 8”Jointer $1,899.00 Order no. Description Price CTJ-150X 6”Jointer $1,469.00 Order no. Description Price Accessories for Spiral Head Jointers BLADE-X-10 10 Insert Cutters $75.00 BLADE-X-SCREW 10 Screws $5.00
  • 18. For more information & to shop online go to www.carbatec.com.au16 Machinery - Thicknessers/Moulders CARBA-TEC® 15” THICKNESSER This machine has a power- ful motor, 3-knife cutterhead, serrated infeed roller, poly- urethane outfeed roller, anti- kickback fingers and adjust- able bed rollers. This machine is fitted with cast iron tables on both the in and outfeed side instead of cheap rollers. Two feed speeds and a rise and fall head round out the long list of features on this machine. Price includes dust chute with 4” outlet, integral mobile base, paddle style stop switch. Note: 240v, 15amp circuit/plug and minimum 1200cfm dust ex- tractor required for this machine. 13” CARBA-TEC® THICKNESSER & MOULDER This unit accommodates a wide range of moulding knives (not included) to produce various patterns for application in decora- tion, furniture parts, door and window frames etc. 13” CARBA-TEC® SPIRAL HEAD THICKNESSER This machine is an excellent addition to your workshop and does not take up the space that a full-size ma- chine does. Plus you can take it with you if you do jobs away from the shed. JET BENCHTOP 12” THICKNESSER • Magnetic switch with dust cover • Overload protection with reset circuit breaker • Adjustable depth gauge enables precise thickness control • 50mm dust hood allows connection to shop vaccum or dust col- lector Includes set of spare knives. Also comes with 100-50mm reducer to enable std 100mm hose connection. JET 16” THICKNESSER • Cutter head with three high-speed steel knives locks firmly in place to prevent movement while in use • Heavy-duty cast iron and steel construction for added strength and durability • Two-speed gear box with automatic chain tensioner lets you adjust the feed rate to meet your needs • Powerful 3 HP TEFC induc- tion motor with three V-belt transmission for smooth and consistent power • Large handwheel with positive gear drive allows for quick and accurate table adjust- ments • Heavy-duty steel wide base open stand with casting pads provides support and stability of the tool during use 15A plug requires 15A circuit. Specifications JET-JWP12 CT-330X CT-236 CTJ-680 JET-JWP160S Motor 1800w 230v 10A 2.4hp, 230v, 50Hz, AC only, 10A 2hp, 230v 3hp, 230v, 15A 2200w 230v 15A Max. cutting width 318mm 330mm 330mm 381mm 406mm Max./Min thickness of stock 153mm/5mm 150mm/5mm 150mm/5mm 170mm/6mm 152mm/3mm Max. cutting depth planer 3mm/pass 3mm @ 150mm / 0.5 @ 330mm 3mm/Pass, 3mm/Pass 4.7mm Max. cutting depth Mould N/A N/A 1.6mm/Pass N/A N/A Infeed/outfeed roller Polyurethane Polyurethane Polyurethane Serrated/Polyurethane Serrated Steel Feed rates 7m/min 8Mpm 3 & 6 mpm 5/9Mpm 4.8m/min;6m/min Blades Resharpenable? No N/A Yes Yes Yes Table Type Pressed Metal/w Rollers Pressed Metal Cast Iron Cast Iron - Fixed Cast Iron Dust Chute 100mm 4” Included 2-1/2” & 4” 4” 1 x 4” 100mm Cutterhead Ø48mm Segmented Spiral 3 Knives 3 Knives Straight Knife, 78mm Dia. Table Size 291x317mm 330x860mm 330x490mm 1070x381mm 291x317mm Shipping/Net Weight 45/36kg 40/37.8kg 58/55kg 211/199kg 241/202kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price CTJ-680 15” Thicknesser $1,399.00 BLADE-15 15” HSS blades(3) $75.00 BLADE-15-T 15” HSS blades w/18% tungsten(3) $95.00 Order no. Price JET-JWP16OS $1,599.00 Order no. Description Price CT-330X 13” Carba-Tec Spiral Head Thicknesser $729.00 BLADE-CT330X Replacement blades 10pk $59.00 Order no. Description Price CT-236 13” Carba-Tec Thicknesser/Moulder $1,269.00 CT-236-CHUTE 4” Dust Chute $65.00 CT-236-BLADESET Set of Moulding blades-5 styles $269.00 BLADE-13-T 13” TCT Planer Blade Set $75.00 Order no. Price JET-JWP12 $429.00
  • 19. Want to see more? See our website for our full range of products. 17 Machinery - Thicknessers CARBA-TEC® 20” INDUSTRIAL THICKNESSER Large cutting capacity, heavy castings make this machine a solid performer. Machine is fitted with integral mobile base. Note: 230v, 15amp circuit/plug and minimum 1200cfm dust extractor required for this machine. CARBA-TEC® 15” INDUSTRIAL THICKNESSER The feature filled CTJ-381 is a welcome addition to any shed or workshop. Machine is fitted with full cast iron tables on both the in and outfeed side. Machine is fitted with integral mobile base. Note: 230v, 15amp circuit/plug and minimum 1200cfm dust extrac- tor required for this machine. Specifications CTJ-381 CTJ-381X CTJ-508 CTJ-508X-1PH/3PH Motor 3hp, 230v, 15A 3.5hp, 230v, 15A 3hp, 230v 15A, or 5hp 415v 3.5hp, 230v, 15A or 5hp 415v Max. cutting width 381mm 381mm 508mm 508mm Max./Min thickness of stock 205mm/6mm 205mm/6mm 210mm/6mm 210mm/6mm Feed Rates 5 & 9 Mpm 5/9Mpm 4.8 & 6.2Mpm 4.8/6.2Mpm Max. cutting depth 3mm Pass 1.5mm/Pass 4mm/Pass 1.5mm/Pass Infeed/outfeed roller Serrated/Polyurethane Serrated/Polyurethane Serrated/Knurled Metal Serrated/Knurled Metal Cutterhead Straight 3 Knives Spiral 74 Insert Knives Straight 4 Knives Spiral 98 Insert Knives Table Type Cast Iron-Rise & Fall Cast Iron - Rise & Fall Cast Iron-Rise & Fall Cast iron - Rise & Fall Table Size 1070 x 381mm 1070 x 381mm 1410 x 508mm 1410 x 508mm Dust Chute 1 x 4” 1 x 4” 1 x 5” 1 x 5” Workshop Footprint 820x1070x1160mm 820x1070x1160mm 1000x1410x1120mm 1000x1410x1120mm Shipping/Net Weight 290/260kg 290/260kg 420/380kg 420/380kg X SERIES SPIRAL HEAD 15” PREMIUM THICKNESSER This machine has a powerful motor, 74-knife cutterhead, anti-kickback fingers, adjust- able bed rollers and front mounted NVR magnetic safety switch. Two feed speeds and rise and fall table round out the long list of features on this machine. The motor is mounted in the lower cabinet, and this allows for the top mounted return rollers. Machine is also fitted with integral mobile base and dust chute with 4” chute. Note: 230v, 15amp circuit/plug and minimum 1200cfm dust extractor required for this machine. SERIESPREMIUM PERFORMANCE X SERIES SPIRAL HEAD 20” PREMIUM THICKNESSER Adjustable bed rollers, integral mobile base, front mounted NVR magnetic safety switch, 5” rear dust collection port, top mounted return rollers and shielded turret guards add to the great value package on offer. Large cutting capacity, heavy castings make this machine a solid performer. Note: 230v, 15amp circuit/plug and minimum 1200cfm dust extractor required for this machine. SERIESPREMIUM PERFORMANCE Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price CTJ-381 15” Thicknesser $1,599.00 BLADE-15 15” HSS Blades (3) $75.00 BLADE-15-T 15” HSS Blades w/18% tungsten (3) $95.00 Order no. Description Price CTJ-508-1PH 20” Thicknesser, Single phase $2,295.00 CTJ-508-3PH 20” Thicknesser, Three phase $2,295.00 BLADE-20 20” HSS Blades (4) $139.00 BLADE-20-T 20” HSS Blades with 18% tungsten (4) $169.00 Order no. Description Price CTJ-381X 15” Thicknesser $2,695.00 BLADE-X-10 Insert Cutters (10) $75.00 BLADE-X-SCREW Screws (10) $5.00 Order no. Description Price CTJ-508X-1PH 20” Spiral Thicknesser, 1PH $3,795.00 CTJ-508X-3PH 20” Spiral Thicknesser, 3PH $3,795.00 BLADE-X-10 Insert Cutters (10) $75.00 BLADE-X-SCREW Screws (10) $5.00
  • 20. For more information & to shop online go to www.carbatec.com.au18 Machinery - Planer/Thicknessers JET COMBO PLANER/ THICKNESSER JPT-310 • Dual opening of the tables to change from planing to thicknessing in seconds • Cast iron jointer tables, precision planed to ensure optimum sliding of the workpieces • Eccentric rod support on outfeed table facilitates hollow joint adjustment • Precision fence, push wood handle and adjust- able cutterhead guard for extra safety 15A plug requires 15A circuit. JET COMBO- PLANER/ THICKNESSER • Dual opening of the tables to change from planing to thickness- ing in seconds • Cast iron jointer tables, precision planed to ensure optimum sliding of the workpieces • Feed can be switched off • Three high speed steel knives as standard equipment • Precision fence, push wood handle and adjustable cutterhead guard for extra safety Specifications AW106PTX/AW106PT JET-JPT260M JET-JPT310 JET-JPT310HH Motor 1-1/2hp, 230v 1700w 230v 10A 2300w 230v 15A 2300w 230v 15A Max. cutting depth (planer/thicknesser) 2mm 3/4.5mm 3/4.5mm 3/4.5mm Cutterhead (AW106PTX)Spiral/(AW106PT) Straight 3 x Single Sided 3 x Single Sided 56 x 4 Carbide Inserts Blades Resharpenable yes yes yes N/A Dust Chute 1 x 4” 100mm dia. 100mm dia. 100mm dia. Workshop Footprint 1100x800x1000mm 1160x700x1000mm 1400x750x1000mm 1400x750x1000mm Shipping/Net Weight 165/150kg 207/175kg 261/230kg 261/230kg Planing Mode Specifications Table Type Cast Iron Iron Casting Iron Casting Iron Casting Table Length 1190mm 1120mm 1400mm 1400mm Table Width 250mm 260mm 310mm 310mm Fence Tilt -45° to +45° 0-45° 0-45° 0-45° Fence Stops -45°/90°/+45° 0°/45° 0°/45° 0°/45° Thicknessing Mode Specifications Max. Cutting Width 250mm 256mm 307mm 307mm Max./Min thickness of stock 180mm/6mm 225/3mm 225/3mm 225/3mm Feed Rate 8Mpm 5m/min 7m/min 5m/min Infeed/outfeed roller Serrated/Steel Serrated Steel/Polyurethane Serrated Steel/Polyurethane Serrated Steel/Rubber Table Type Cast with Rollers Cast Iron Cast Iron Cast Iron Table SIze 1120 x 260mm 1400 x 310mm 1400 x 310mm 10” COMBO PLANER/THICKNESSER An economy version of a European style planer/thicknesser. A real space saver in the workshop. Features flip-up tables for conversion to thicknesser. Tables have noise-dampening slots. Serrated steel infeed roller is standard. European style alloy cutterhead guard. SPIRAL HEAD 10” COMBO PLANER/ THICKNESSER Same as above but with spiral cutterheads. Offering silent cut- ting as well as less chatter and tear-out in curly or highly figured wood, these cutterheads save hours of cleanup work after dress- ing timber. Helical head Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price JET-JPT310 Combo Planer/Thicknesser Straight Knives $2,399.00 JET-JPT310HH Combo Planer/Thicknesser Helical Head $3,299.00 Order no. Description Price JET-JPT260M Planer/Thicknesser - Straight Knives $1,899.00 Order no. Description Blades Price AW106PT 10” Planer/Thicknesser Straight $1,399.00 Order no. Description Blades Price AW106PTX 10” Planer/Thicknesser Spiral $1,949.00
  • 21. Want to see more? See our website for our full range of products. 19 Machinery - Mortiser CARBA-TEC® CHISEL MORTISER A robust mortiser of cast iron construction, plenty of power to cut 19mm mortises. The table move- ment is controlled by two hand wheels, one for longitudinal and one for the transverse movement; the movement is smooth and precise with dovetail slides and jib strips for longer life. The table has a wooden facing for through mortising as well as a length stop for repetition work, a quick acting vice and two cam-operated work clamps. The down feed handle can be easily re-positioned on its shaft to give the most convenient working position. Supplied with cabinet stand and handy storage cupboard. Supplied with one 5/8” chisel. Specifications Motor (fan cooled ribber) 1hp, 230v Chisel RPM 1400rpm Head Tilt No Drill chuck capacity 16mm Max. chisel size 25.4mm Centre of chisel to fence 145mm Chisel shank size 3/4” & 13/16” Chisel stroke 220mm Max. height with 12.7mm chisel 220mm Table size 400x150mm Workshop Footprint 820x550x1720mm Shipping/Net Weight 131/125kg CARBA-TEC® HORIZONTAL MORTISER/BORER This is the ideal solution for a workshop that does not want to use their drill press as a mortising machine. The motor is power- ful enough to cut most wood materials with ease. This machine is an excellent addition to any workshop. 15A plug requires 15A circuit. Specifications Motor 3hp, 230v Spindle speed 2840rpm, LH Rotation Chuck capacity 0-20mm Table Size 460 x 190mm Travel Transverse-135mm, Longitudinal-175mm, Vertical-115mm Workshop Footprint 780x860x1500mm Shipping/Net Weight 120/90kg CARBA-TEC® BENCHTOP CHISEL MORTISER This machine has the huge benefit of both lateral and longitudinal movement. Workpieces can be moved by moving the table instead of moving the workpiece, this eliminates error in that finer adjust- ments can be made. Refer to page 39 for chisels and accessories. Specifications Motor 1/2hp, 230v Chisel RPM 1400rpm Head Tilt no Drill chuck capacity 13mm Centre of chisel to fence 75mm Max. Chisel size 16mm Chisel Shank Size 3/4” Chisel Stroke 120mm Max. Height w/chis 110mm Table Size 460 x 190mm Travel Lateral-170mm, Longitudinal-70mm Workshop Footprint 670x450x340mm Shipping/Net Weight 42/40kg JET TILT MORTISER 719AS • Solid cast iron construction • Rack and pinion head raising and lowering system com- bined with dovetail guides and gas cylinder • Large hand wheels control the linear and cross move- ments of the table • Depth and length stops for precise serial production • Quick-release vise for speedy release of work material • Head tilts 180° – also makes it possible to drill a lock in a finished door Specifications Motor 750w 230v 10A Chisel RPM 1450rpm Drill chuck capacity 13mm Max. chisel size 25.4mm Centre of chisel to fence 100mm Chisel shank size 5/8”, 3/4”, 13/16” Chisel stroke 200mm Max. height w/12.7mm chisel 220mm Table size 178x514mm Workshop Footprint 550x550x1720mm Shipping/Net Weight 132/125kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price CT-HM25D $729.00 Order no. Price HM-3016 $839.00 Order no. Price CT-HM16D $339.00 Order no. Price JET-719AS $1,449.00
  • 22. For more information & to shop online go to www.carbatec.com.au20 Machinery - Drill Presses DP-4116B CARBA-TEC® BENCH DRILL PRESS Designed to sit on top of a short workbench or stand due to the shorter column. The drill press is fitted with provision for a work light between the chuck and the column (bulb not sup- plied). Cast iron pulley system reduces belt slip, vibration and produces more inertia due to the extra weight. We think its a very worthwhile improvement. 3-16mm chuck incl. RDP-116 CARBA-TEC® RADIAL DRILL PRESS Radial drill presses are designed for complex compound angle drilling. Chuck to column capac- ity is variable from 130 - 420mm due to the sliding horizontal col- umn. DP-4116F CARBA-TEC® PEDESTAL DRILL PRESS Designed to stand alone on the floor of the workshop. Cast iron pulley system reduces belt slip, vibration and produces more inertia due to the extra weight. DP-4119F CARBA-TEC® PEDESTAL DRILL PRESS Designed to stand alone on the floor of the workshop. The drill press is fitted with provision for a work light between the chuck and the column. Cast iron pulley system reduces belt slip, vibration and produces more inertia due to the extra weight. DP-4132F CARBA-TEC® PEDESTAL DRILL PRESS Extra heavy duty unit. Designed to stand alone on the floor of the workshop. Cast iron pulley system reduces belt slip, vibration and produces more inertia due to the extra weight. We think its a very worthwhile improvement. Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Specifications RDP-116 DP-4116B DP-4116F DP-4119F DP-4132F Motor 1/2hp 3/4hp 3/4hp 650W 2hp Speed steps 5 Speed 16 Speed 16 Speed 16 Speed 12 Speed Speed range 500-2450rpm 210-3340rpm 210 - 3340rpm 120-3000rpm 150-2700rpm Chuck capacity 1 to 13mm 3 to 16mm 3 to 16mm 3 to 16mm 3 to 16mm Quill Travel 55mm 60mm 60mm 65mm 92mm Chuck Travel 80mm 82mm 82mm 82mm 120mm Chuck to base 1,225mm 520mm 1,135mm 1,135mm 1,110mm Taper N/A MT2 MT2 MT2 MT4 Tilt type & degree Head 45°L 90°R Fixed Head Fixed Head Fixed Head Fixed Head Table tilt 360° Table, 360° Table, 360° Table, 360° Table, 360° Column to drill centre 130-420mm 160mm 160mm 180mm 255mm Chuck to table max. 700mm 320mm 690mm 680mm 550mm Work light provision No Yes Yes Yes Yes Table size 300mm dia. 305mm dia. 305mm dia. 290x290mm 470x420mm Base size 240 x 410mm 240 x 410mm 240x410mm 270x440mm 450x580mm Workshop footprint 360x830x1640mm 340x630x970mm 340x630x1580mm 360x650x1620mm 620x820x1730mm Drilling capacity 1/2” Steel 3/4” Steel 3/4” Steel 3/4” Steel 1-1/4” Steel Shipping/Net weight 65/60kg 57/53kg 66/60kg 86/80kg 148/138kg Price $379.00 $359.00 $399.00 $499.00 $839.00
  • 23. Want to see more? See our website for our full range of products. 21 Machinery - Sanders JET VARIABLE SPEED DRILL PRESS JDP2800VS • Precisely machined cast iron table with extension wings • Cross laser for easy operation standard • Down feed handles can be mounted on either side of the drill press • Extension wing provides additional support for longer work pieces • Telescopic fence with work stop and dust collection port 50 mm • Digital speed display for quick reading of speed JET BELT/DISC SANDER JSG-6DC • Belt tracking adjustments are eas- ily made with exclusive dual thumb screws. • Two precision ground cast iron tables with mitre gauge slots. • Exclusive design single 4” dust port base which efficiently collects the majority of the dust produced by both sanders before it becomes airborne. Specifications Motor 1100w 240v 10A Belt size 150x1220mm Disc Diameter 305mm Table Size Disc 419 x 254mm Table Size Belt 318 x 178mm Dust port 100mm Table Tilt Disc 25° up/-45° down Table Tilt Belt 20° up/-45° down Workshop footprint 699 x 734mm Shipping/Net Weight 115/105kg JET BELT/DISC SANDER WITH STAND • The belt sander plate features a graph- ite sheet which helps the unit run cooler giving the machine and sanding belt much longer life. • The belt sander will operate horizontally or vertically or anywhere in between. Specifications Motor 550w 240v 10A Belt size 150x1220mm Disc Diameter 230mm Table Size Disc 190 x 300mm Table Size Belt 140 x 280mm Table Tilt 0°-45° Dust port 100mm Mitre gauge As Standard Quick release belt As Standard Workshop footprint 830 x 780mm Shipping/Net Weight 45/41kg CARBA-TEC® 6” X 9” COMBO BELT/DISC SANDER Our top selling sanding unit. Heavy cast con- struction with dual location, tilting work table. Belt can be used vertically and horizontally. Disc table tilts up to 45°. Standard equip- ment includes graphite slip cloth underneath the belt. Includes stand, mitre gauge, sand- ing belt and hook and loop disc. See pg. 37 for replacement. sanding accessories. Specifications Motor 3/4hp Belt size 150 x 1220mm Disc Diameter 229mm (9”) Table Size Disc/Belt 310 x 160mm Table Tilt 0° to 45° Dust port 2 x 1-1/2” Mitre gauge Included Quick release belt Yes Workshop footprint 740 x520x1400mm Shipping/Net Weight 54/51kg Open stand shownUte/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Specifications JET-JDP2800VS Motor 750w 230v 10A Speed steps Variable Speed range 330-2500rpm Chuck capacity 3-16mm Quill Travel 110mm Chuck Travel 110mm Chuck to base 1094mm Taper MT2 Tilt type & degree 90°,±0°/45°/90° indexed Table tilt 0-90° (0/45/90) Column to drill centre 225mm Chuck to table max. 573mm Work light provision LED Table size 420x530(780)mm Base size 510x320mm Workshop footprint 800mm Drilling capacity 16mm mild steel Shipping/Net weight 105/95kg Price $1,349.00 Order no. Price JET-JSG96OS $699.00 Order no. Desc. Price JET-JSG6DC Sander $1,499.00 JET-JSG6DC-CS closed stnd. $299.00 JET-JSG6DC-OS open stand $99.00 Order no. Price SB-609 $359.00
  • 24. For more information & to shop online go to www.carbatec.com.au22 Machinery - Sanders CARBA-TEC® 6” X 12” COMBINATION OSCILLATING BELT/DISC SANDER Belt can be used vertically or horizontally. Disc table tilts to 45°. Disc also features hook and loop backing pad. Heavy gauge steel cabinet and cast sanding tables make this machine perfect for cabinetmakers or serious enthusiasts. Oscillating belt with graphite slip cloth provides longer life for abrasives. Mitre gauge and starter abra- sives (80 grit) are included with the ma- chine. See pg. 37 for replacement sanding accessories. Specifications Motor 1-1/2hp, 230v Belt size 150 x 1220mm Disc Diameter 305mm Table size (Disc) 177 x 406mm Table tilt 0° to 45° Dust Port 2 x 4” Mitre Gauge Included Quick Release Belt yes Workshop footprint 597x533x1409mm Shipping/Net Weight 98/85kg JET OSCILLATING EDGE SANDER OES-80CS • Oscillating feature provides a scratch-free finish and reduces heat build-up on sanding belt • The belt sander platen features a graphite sheet which helps the unit run cooler giving the machine and the sanding belt much longer life Specifications Motor 1100w 240v 10A Belt Speed 1880m/min Belt size 150x2260mm Sanding belt tilt 0°~90° Workshop footprint 673 x 510mm Shipping/Net Weight 125/120kg Specifications JET-JBOS5 JET-JOVS10 Motor 360w 240v 10A 750w 240v 10A Motor Speed 1425rpm 1425rpm Oscillating stroke 25mm 38mm Oscillates per minute 30/min 60/min Table size 370x370mm 610x610mm Table tilt 0°~45° 0°~45° Workshop Footprint 430 x 430mm 610x610mm Shipping/Net Weight 38/35kg 145/130kg JET BENCHTOP OSCILLAT- ING SPINDLE SANDER • Large cast iron workspace to handle all your projects. • Table tilts to 45 degrees handle all bevel sanding projects. • Bobbin sizes included; 6, 12, 16, 38 and 50mm dia. JET OSCILLATING SPINDLE SANDER JOVS-10 • Cast table is mounted on trun- nions system. • Spindle and table inserts are conveniently stored on a steel rack. • Bobbins sizes included; 6, 9, 12, 15, 19, 25, 38, 50, 75 and 100mm dia. A quality machine for any workshop. Cast iron body construction with an alloy table. Unlike most sanders that run at twice the speed this machine make it almost impos- sible to burn the wood being sanded and greatly prolongs the life of the paper. Mitre gauge included. Specifications Motor 1hp, 230v Disc RPM 1,440rpm Disc Diameter 300mm (12”) Table Size 440 x 156mm Table Tilt 45° up & 45° down Dust Port 37mm (1-1/2”) Mitre Gauge Included yes Shipping/Net Weight 31/29kg CARBA-TEC® 12” DISC SANDER WITH BRAKE Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price SBD-6012QC $1,099.00 Order no. Price JET-OES80CS $1,199.00 Order no. Price JET-JBOS5 $459.00 Order no. Price JET-JOVS10 $1,299.00 Order no. Price DSB-12B $199.00
  • 25. Want to see more? See our website for our full range of products. 23 Machinery -Sanders JET DRUM SANDER 16-32 • Precision-flattened reinforced steel conveyor bed • Zinc-plated steel tension rollers mount next to the drum • Drum height and downward pressure are adjustable, eliminating snipe • Height adjustment handle allows both radical height changes & 1/10mm adjustments for extremely precise sanding thickness control • Infinitely variable feed rate of 0-3 m/min • Minimum of 650 CFM dust collection recommended • One 80 grit abrasive strip and one 100 grit abrasive conveyor belt included JET DRUM SANDER 10-20 • Infinitely variable feed rate from 0 to 3 m/min for surface, dimension, & finish sanding • Self-cooling precision-machined and balanced 127 x 255 extruded alumini- um drum • TEFC motor prevents dust infiltration • Precision-flattened reinforced steel conveyor bed • Zinc-plated steel tension rollers mount next to the drum • One 80 grit abrasive strip and one 100 grit abrasive conveyor belt included Specifications JET-1020 JET-1632 WDS-400 MS-25B JET-2244OSC Main/Conveyor Motor 736w 230v 10A 1100w 230v 10A 1hp, 230v 50W 3hp, 230v/1.6hp 1300w 230v 10A Max. sanding width 250/500mm 400/800mm 400/800mm 620mm 560/1120mm Max./Min. sanding thickness 75/0.8mm 75/0.8mm 135/6mm 135mm/6mm 75/0.8mm Drum diameter 127x255mm 127x405mm 130mm 127mm 127x560mm Drum Speed 1400rpm 1400rpm 4000rpm 1440rpm 1400rpm Feed Speed 0-3m/min 0-3m/min 0.6 to 3Mpm 1 to 6 Mpm 0 to 3 Mpm Dust Port 100mm 100mm 1 x 2-1/2” 2 x 4” 1 x 100mm Table Size 395 x 305mm 542 x 431mm 540 x 430mm 630 x 780mm 594 x 583mm Workshop footprint 625x455x505mm 810x580x1220mm 900x600x720mm 1130x780x 300mm 1120x685x1320mm Shipping/Net Weight 48/44kg 74/65kg 55/53kg 210/199kg 178/165kg CARBA-TEC® 400MM WIDE DRUM SANDER Ideal for finish sanding or it can be used as a finish planer for curly-grained timber. 125mm throat depth. Constructed from cast and ma- chined alloy to provide great accuracy and trouble-free operation. Made in Taiwan. Comes with replacement belts: 1 x 36grit 1 x 80grit, 1 x 120grit Comes with replacement belts: 1 x 36grit, 1 x 80grit, 1 x 120grit CARBA-TEC® 25” TWIN DRUM SANDER A variable speed rubberised feed belt protects the underside of panels. Abrasives are spirally wound onto both drums and are tensioned by spring clips. Drums can be configured with coarse paper on the front drum and fine paper on the rear producing a finished board in one pass. Dust extrac- tion (at least 2hp) is a prerequisite for this machine. 15A plug requires 15A circuit. JET OSCILLATING DRUM SANDER 22-44 • Exclusive SandSmart controlled infi- nitely variable feed rate from 0 to 3 m/ min, giving the ultimate sanded finish • Precision-flattened steel conveyor bed • Drum height and downward pressure is adjustable, eliminating snipe • Oscillating head prolongs the life of your sandpaper Comes with replacement belts: 1 x 36grit, 1 x 80grit, 1 x 120grit Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price JET-1632 $1,199.00 Order no. Description Price JET-1020 Drum Sander 10-20 $999.00 JET-1020-OS Optional open stand $99.00 Order no. Price WDS-400 $789.00 WDS-400-STAND $59.00 Order no. Grit Price Replacement Paper WDS-SP-60 60 $18.00 WDS-SP-80 80 $18.00 WDS-SP-120 120 $18.00 WDS-SP-180 180 $18.00 WDS-SP-240 240 $18.00 Order no. Price MS-25B $2,495.00 Order no. Price JET-2244OSC $2,499.00
  • 26. For more information & to shop online go to www.carbatec.com.au24 Machinery - Router Tables KREG® BENCHTOP ROUTER TABLE Built from the ground up as the portable solution for precision rout- ing, this table provides trim carpenters and other mobile profes- sionals with the quality materials and attention to detail that they’re only used to finding in larger router tables. It features the same high-pressure laminate Micro-Dot MDF surface as Kreg’s top of the line Precision Router Table, a full-size phenolic insert plate and an innovative rigid steel base that - believe it or not - actually tests qui- eter than enclosed portable router tables. Why put up with ‘portable’ features when you can have the real thing? SLIDING ROUTER TABLE Features independent infeed and outfeed fence, holddown work clamp and mitre gauge. Overall table size: 22” x 31” (559 x 787mm). Suits most popular router types and includes stand. NOTE: switch and cord set may vary from type shown. Motor and router bits not included. CARBA-TEC® CAST IRON TOP ROUTER TABLE Features universal router mounting system. Fits most 1/2” routers. Table tilts to 45° for easy under table access. Fitted with remova- ble key switch, cast iron dust housing, 2 spring steel hold-downs. Also features a split fence. Stand included. Working height 850mm. Standard 3/4” x 3/8” mitre slot for accessory and jig fitment. Router Bit not included. Specifications KR-PRS2000 RT-017 MS-RB Motor Supplied by User Supplied by User Supplied by User Table Material Easy SlideTm Micro Dot MDF Cast Iron Cast Iron with Aluminium Slide Table Fence Type Anodized aluminium Aluminium 2 piece Aluminium 2 piece Table Size 610x405mm 680 x 505mm 560x790mm Dust Port 2-1/2” 1 x 4” 1x2-1/2” Workshop Footprint 720x515x508mm 900x780x1120mm 1560x790x1100mm Shipping/Net Weight 15/12kg 56/51kg 76/71kg Router bits not included. ROCKLER TRIM ROUTER TABLE Get more out of your compact router with a rugged, adjustable Trim Router Table that goes anywhere! A Rockler Exclusive, pre-drilled holes on the back of the Trim Router Table let you attach a clamping strip for quick use on the edge of a bench, a table, a piece of ply- wood, or the tailgate on your ute. Router not incl. Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price RT-017 $349.00 Order no. Price KR-PRS2000 $309.00 Order no. Price MS-RB $549.00 Order no. Price RK-43550 $92.00
  • 27. Want to see more? See our website for our full range of products. 25 Machinery - Router Tables/Spindle Shaper/Moulder ROUTER TABLE WITH TENONING ATTACHMENT This heavy duty solid cast iron table top is the most sophisticated router table we have ever seen. Includes stand, feather board and mitre gauge. Standard 3/4” x 3/8” mitre slot for accessory and jig fitment. Includes accurate sliding tenoning attachment. CARBA-TEC® 3/4” SPINDLE SHAPER Extra large heavy cast iron table with surface ground finish with two spindle speeds and reverse. Independ- ent infeed and outfeed fences feature precision micro-adjustment. Includes integral mobile base and standard 3/4” x 3/8” mitre track. CARBA-TEC® TILTING HEAD SPINDLE MOULDER Sturdy cast iron and steel cabinet construction, tilting head, cast iron cutter guard, micro adjustable fence and sliding table make this a great choice for any workshop. 15A plug requires 15A circuit. KREG® PRECISION ROUTER TABLE Whether you’re routing a simple dado, putting an edge on a counter- top, or building an entire set of raised panel doors, this router table can help you finish projects faster, and with greater accuracy than ever before. Router not included. Standard 3/4” x 3/8” mitre slot for accessory and jig fitment. Adjustable stand included. Specifications CTJ-310 SK-100T Motor 2hp, 230v 3hp, 230v 15A Spindle Speeds 5500-8000rpm 1800, 3000, 6000, 9000rpm Spindle Tilt No -10° to+30° Table Size 710 x 760mm 710 x 640mm Plus Slide Table Table opening dia. 76, 89 & 178mm 200mm Spindle Size 3/4” 30mm Router Collet Sizes 1/4” and 1/2” N/A Spindle Travel 75mm 90mm Mitre Gauge Included? Yes No Dust Port 1 x 4” 1 x 4” Workshop Footprint 710x760x1200mm 1350x2200x1340mm Shipping/Net Weight 160/145kg 222/199kg Specifications KR-PRS1040 RT-660 Motor Supplied by User Supplied by User Table Material Easy SlideTM Micro-Dot MDF Cast Iron Fence Type Anodized Aluminium Cast Iron 1 piece Table Size 810 x 610mm 665 x 475mm Dust Port 2-1/2” 1 x 4” Workshop Footprint 950x645x925mm 830x850x1110mm Shipping/Net Weight 44/38.5kg 68/63kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price KR-PRS1040 Router Table-Complete $649.00 KR-KRS1030 Universal Steel Stand $229.00 KR-PRS1010 Precision Router Table Fence $275.00 KR-PRS1020 Precision Router Table Top $245.00 KR-PRS3090 Heavy Duty Casters $69.00 Order no. Price RT-660 $899.00 Order no. Price CTJ-310 $1,249.00 Order no. Price SK-100T $2,195.00
  • 28. For more information & to shop online go to www.carbatec.com.au26 Machinery Accessories HEAVY DUTY BIESEMEYER STYLE TABLESAW FENCE AND RAILS Offers accuracy and repeatability greatly enhancing your productivity and craftsman- ship. DELUXE SUVA GUARD SYSTEM An ideal solution for table saw safety and dust control. When connected to a dust col- lection system, this suva guard captures the dust thrown up by your table saw blade. CARBA-TEC® TENONING JIG Simplifies cutting tenons and joints on your table saw. Fits most saws with a 3/8” x 3/4” mitre gauge groove, and handles stock up to 3-1/4” thick. 24” TAPER CUTTING JIG Slides against the fence on any saw bench. Allows you to accurately cut tapers 0° to 15°. 1kg. CARBA-TEC® UNIVERSAL FOLDING MITRE SAW STAND Works with all mitre saws. Lightweight but strong aluminium construction allows for easy transport between jobs. TAPER/STRAIGHT LINE JIG If you’ve ever struggled to make a lengthy angled cut, this is the jig for you. With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth slid- ing design, it makes tapered cuts fast, easy and precise. Perfect for chair legs, table legs and more. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. Includes 36” miter bar. Measures 31-5/8’’ x 7-3/4’’. 1/2’’ thick MDF. ROCKLER TABLESAW CROSSCUT SLED No more squinting at those tiny scales — this Crosscut Sled’s large protractor scale lets you precisely tune your angles for air- tight miters and crosscuts. Easy-to-read 1/2° graduations and a hair-line indicator ensure error-free setups, while a heavy-duty alumi- num fence, adjustable MDF fence face, and smooth-sliding components delivers versa- tile and precise operation. NEW ROCKLER MAGNETIC JOINTER JIG Setting knives on jointer cutter heads just got easier! Magnetic bars hold jointer knives in place flush with the outfeed table on any 6” to 8” jointer bed. This jig is much quicker and easier than working with dial indica- tors. Allows quick shifting of knives to avoid damage and extend blade life. Solid steel construction. ROCKLER ROUTER TABLE BOX JOINT JIG Make precise, tight-fitting box joints with your router! For use on virtually any router table with a standard 3/4” miter slot, this jig fea- tures a smooth-sliding backer sled and three (3) precision-machined aluminium indexing keys to give you air-tight joints with either 1/4”, 3/8” or 1/2” spacing. Works with stock up to 3/4” thick. The spiral upcut bit set in- cludes 1/4”, 3/8” and 1/2” HSS Spiral Mortis- ing Bits. To see the box . making project go to the Develop & . Discover section on the website. VERNIER HEIGHT GAUGE Ideal for router and saw table setups, etc. Range is from 0 to 180mm. 460g. Order no. Price DSG-1 $239.00 Order no. Price TSC-FENCE $329.00 Order no. Price CTJ-183 $115.00 Order no. Price 7726 $20.00 Order no. Price CTB-07 $199.00 Order no. Price RK-33113 $229.00 Order no. Price RK-21597 $105.00 Order no. Price RK-34099 $49.00 Order no. Description Price RK-29502 Box Joint Jig $125.00 RK-30166 3 pce Spiral Upcut Bit Set $92.00 Order no. Price HG-1 $31.00
  • 29. Want to see more? See our website for our full range of products. 27 Machinery Accessories HEAVY DUTY TOOL STAND Use this stand to hold your portable thicknesser or other bench mounted machine. Stand includes MDF top and adjust- able feet. Height is 780mm. PLANER & JOINTER BLADE SETTING JIG. (MAGNETIC) Using a pair of micro-adjustable magnets this jig will help you install new planer blades in per- fect alignment with an accuracy of +/- .025mm. Fits most planer blades. Maximum diameter of cutterhead: 130mm. The easiest and most efficient way to reset your blades. ROLLER STAND WITH UNIVERSAL CLAMP A universal clamp allows this roller to be attached to almost any work surface. UNIVERSAL ROLLER & BALL STAND Converts in seconds from roller stand to ball bearing stand. Max. height: 1metre. Stand rated to 95kg HEAVY DUTY SINGLE ROLLER STAND Rated to 227kg. Height is ad- justable from 670 to 1100mm. Post is tapered for strong and positive locking. BASIC MODEL ROLLER STAND Adjustable in height from 660 to 1000mm. Max. height: 1 metre. ROLLER STAND WITH 5 ROLLERS Adjustable in height from 670 to 1100mm. Stand rated to 227kg. EXPANDING CONVEYOR ROLLERS This conveyor makes move- ment of large workpieces easy. Simply connect the conveyor to the machine or workpiece area you’ll be using it with, extend the bed to the required length and set the brakes. Next, adjust the height to meet the entry point required for your workpieces and you’re ready to go. Assem- bly adjusts from 450mm to 1.3m in length and 670 to 940mm in height. ROLLER STAND WITH 9 ROLLERS Height adjustable from 670 x 1100mm and easily folds up for storage. Both posts are tapered so locking is positive and strong. PROTRACTOR AND SAW GUIDE Features 18° guide bar for preci- sion sawing and routing. Allows accurate angle cutting. BALL BEARING ROLLERS These ball bearing roller sets rotate in any direction, allow- ing you free movement of your stock. Unlike other types of roll- ers, these 360° universal transfer bearings excel when materials are pushed in any direction. They mount easily on a piece of plywood, giving you your own outfeed table for saws, finishing tables and assembly lines. Order no. Price PSJ-01 $62.00 Order no. Price PSG-450 $15.00 Order no. Price PS-330 $82.00 Order no. Price S-4401 $62.00 Order no. Price S-5008 $75.00 Order no. Price CR-2197 $85.00 Order no. Price JG-300 $25.00 Order no. Price CR-3582 $115.00 Order no. Price HDC-1131 $249.00 Order no. Price CR-5811 Stand $199.00 CR-ROLLER 4 Pack Rollers $29.00 Order no. Size Price AN-16 16mm $22.00 AN-25 25mm $32.00
  • 30. For more information & to shop online go to www.carbatec.com.au28 LARGE FEATH- ERBOARD Supplied with an expanding clamp- ing system for use with 3/4” (19mm) mitre slots for horizontal use. This clamping system can be used independently of the feather- board for setting up customised jigs as well. PUSH BLOCKS An invaluable accessory when passing ma- terial over a rotating cutterhead. Keeps fin- gers and hands away from the cutting area and provides a virtually non-slip grip with its rubber footing. A necessity for woodworkers of all skill levels. EUROPEAN STYLE PUSH STICK Safety device for router tables and saw benches. Helps keep your fingers safely attached to your hand. Machinery Accessories FIVE PIECE SAFETY KIT A complete set of safety devices for use with various machines. Kit includes; pushblocks, featherboard and 3 push sticks. CARBA-TEC® METAL DETECTOR The sensor head has a diameter of 135mm and will detect most metal objects that will be a danger to your planer or thicknesser blades. Overall length is 395mm. VERITAS® PLANER BLADE SHARPENER Normally, nicked blades will require a so- phisticated grinder or a trip to a commercial sharpening service. Veritas’® planer blade sharpener is designed to restore blades dulled from normal use even if they have minor nicks. It clamps blades up to 200mm wide for sharpening on PSA backed abra- sives. DIAMOND HONE 400 & 600 grit diamond stones for sharp- ening HSS or tungsten carbide jointer and planer blades without removing blades from your machine. CASTOR WITH BRAKE Perfect for heavy ma- chines, with a load Heavy duty castor with parking brake and locking swivel top. Capacity of 60kg per castor. 130mm overall height, 93x75mm plate size, 2.5mm plate thick- ness, 10mm mounting hole diameter, 72x55mm centre line meas- urement for mounting holes, 100mm wheel diameter. All measurements are approx. you are advised to take measurements of the item yourself. UNIVERSAL MOBILE BASE WITH 227KG CAPACITY Machine size is no longer an issue as this mobile base is truly a universal fit. This base expands from a square of 300mm to 914mm up to 508mm x 1320mm in a rec- tangular configuration. Easy assembly. UNIVERSAL MOBILE BASE WITH 320KG CAPACITY Extends from 355mm square or up to 558 x 1370mm in rectangu- lar configuration. Slotted rails adjust to an exact fit on your machine. (Not shown) MOBILE BASE SET Set includes cor- ner brackets, wheels, castor assembly, foot pedal and instructions. Maximum carrying load 150kg. ROLLER AND BRACKET Make your own rolling infeed/outfeed table. Roller length 400mm, diameter 57mm. SILVERGLIDE DRY SLIP Mainly used to protect cast iron table tops from rust. It can also provide lubrication for highly resinous timbers while machining on tablesaws and jointers etc. POWER TWIST LINK V-BELT- 1.2M A high-performance V-belt that reduces vibration on table saws, drill presses, and other power tools by as much as 35%. It replaces the standard 1/2” V-belt on most machines, and the length can be adjusted. Note: Guarding above removed for picture clarity. Order no. Price FBL-2 $16.00 Order no. Price PB-1 $10.00 Order no. Price PS-20 $5.00 Order no. Price SK-5PCE $16.00 Order no. Price MMD-80A $59.00 Order no. Price 05M25-01 $82.00 Order no. Price K-10-D $41.00 Order no. Price CWB-2 $14.00 Order no. Price CMB-500 $85.00 Order no. Price CMB-700 $109.00 Order no. Price MB-6 $55.00 Order no. Price CT-874200 $21.00 Order no. Price SILVERGLIDE-250 $29.00 SILVERGLIDE-1LTR $69.00 Order no. Price RK-61120 $82.00
  • 31. Want to see more? See our website for our full range of products. 29 Machinery Accessories VERTICAL ATTACHMENT Designed for use with the MAG-0328, it aids in providing steady downward pressure to your stock. 200x100x90mm. Mounting base and magnets not incl. UNIVERSAL MOUNTING BASE Allows you to attach a variety of current and future Mags- witch attachments. 217x110x20mm. Requires 20 or 30mm Magjigs. RESAW FENCE ATTACHMENT This unique ball-bearing based resaw fence allows wood to flow more smoothly than an- ything you have ever tried. 218x112x27mm. DUAL ROLLER FENCE ATTACHMENT Helps support a tall panel, hold down a long piece of wood and steady your resaw projects. 218x112x26mm. FEATHERBOARD STARTER KIT The perfect entry into the Magswitch Workholding system. Includes Reversible Featherboard attachment, Universal Mounting Base and two 30mm MagJigs. REVERSIBLE FEATHERBOARD Mounts to the universal mounting base and Magjigs. Is reversible for left and right hand feeds. Mounting base and magnets not incl. THIN STOCK HOLD DOWN Three tools in one! Mounts to the Universal Mounting Base and Magjigs. Ideal for thin stock hold down or infeed/outfeed on a ta- ble saw. Enhances safety by keeping your fingers away from the blade while also mini- mizing chatter for clean cuts. Mounting base and magnets not incl. UNIVERSAL TRACK TOOL ATTACHMENT Mounts to the Universal Mounting Base and Magjigs. It accommodates all hardware on the market. Make your own jigs, fixtures, stops, fences, zero clearance fences and more. Mounting base and magnets not incl. HORIZONTAL RISERS Great to use when working with taller stock. Install one level of risers, or two, to handle taller work piece more efficiently and safely. Featherboards shown not included. 30MM PRO TABLE FEATHERBOARD Fast, easy setup and adjustment. It has 50% greater holding power than the standard table featherboard. 172x180x19mm. UNIVERSAL 20MM FEATHERBOARD Low profile, double-sided, works to improve your cutting results on either side of the blade. 175x100x26mm. 20 & 30MM MAGJIGS Use in multiple jigs, switch in and out off fixtures with ease. Works on any steel or cast iron surface. 30MM PRO FENCE FEATHERBOARD Provides downward pressure on jointer tables, and steel fences used on router tables, shaper tables and table saws. 227x70x26mm. 30 & 50MM MAGSQUARES Use as guides or positional stops for workholding. More versatile than clamps, faster and easier to use. Magswitch Workholding System Order no. Price MAG-0015 $53.00 Order no. Price MAG-0328 $75.00 Order no. Description Price MAG-0004 20mm $30.00 MAG-0005 30mm $42.00 Order no. Price MAG-0329 $75.00 Order no. Description Price MAG-0054 30mm $51.00 MAG-0106 50mm $159.00 Order no. Price MAG-0134 $89.00 Order no. Price MAG-0178 $20.00 Order no. Price MAG-0112 $19.00 Order no. Price MAG-0130 $31.00 Order no. Price MAG-0131 $19.00 Order no. Price MAG-0155 $11.00 Order no. Description Price MAG-0132 18” $42.00 MAG-0370 36” $73.00 Order no. Price MAG-0125 $25.00 Order no. Price MAG-0362 $29.00
  • 32. For more information & to shop online go to www.carbatec.com.au30 Machinery Accessories KREG® PRECISION MITRE GAUGE SYSTEM Cut perfect mitres consistently with our Precision Mitre Gauge System. A number of unique features makes this one of the most precise mitre gauges on the market today. Factory cali- brated accuracy starts with a gauge head that is machined on a computerized milling machine for absolute precision. An easy-to-read Vernier scale ena- bles precise angle adjustments up to 1/10th of a degree. Five patented bar adjusters take up the play in the mitre slot for a perfect fit. A 24” fence section with patented Flipstop and self- adhesive measuring tape is included. • Factory calibrated... perfect right out of the box • Positive stops at 0, 10, 22-1/2, 30, and 45 degrees • Brass pin allows quick changes between positive stop angles • 24” bar that is 3/8” tall x 3/4” wide has 5 bar adjusters eliminates the play between the bar and the mitre slot • 24” Fence section with patented Flipstop KREG® TRUE-FLEXTM FEATHERBOARD Designed so that each finger will provide consistent and optimum pressure, this feath- erboard is made from an extremely durable plastic composite body and even includes an exclusive wedge-lock system which allows the featherboard to be secured to a variety of shop tools without the need for additional hardware. Available in single or twin pack. Single featherboard comes with wedge-lock hardware which works in t-slots or mitre slots on tablesaws, router tables, band saws and more. The twin pack comes as an extended version for use in tandom. When used to- gether they provide additional support for taller workpieces resulting in faster, safer and higher quality cuts. KREG® MULTI-PURPOSE PRO PUSH STICK Adds true speed and convenience to every cut you make! Well balanced heavy duty impact resistant. KREG® MITRE ATTACHMENT Easily attached to a swing StopTM or Produc- tion Stop, the Mitre Attachment supports the mitred end of the board on two surfaces to make a more accurate cut. KREG® SWING STOP Uniquely designed to swing out of the way when workpieces are pressed into its face. KREG® PRODUCTION STOP Features dual lens cursors and the unique ability to be moved to either side of the saw. KREG® PRECISION TRAK & STOP MEASURING SYSTEM (IMPERIAL) Designed to take the guesswork out of cutting wood to length. Kit contains 8’ (4x2’ sections) of anodised aluminium trak. Metric tape also available for purchase. KREG® MAGNETIC DRAWER SLIDE MOUNTING TOOL The strong, rare earth magnets hold most types of metallic drawer slides in place free- ing your hands for the rest of the job. Order no. Price KR-PRS3010 Single $26.00 KR-PRS3020 Twin Pack $47.00 Order no. Price KR-KMA1000 $20.00 Order no. Price KR-KMS7831 $26.00 Order no. Price KR-KMS7801 $41.00 Order no. Price KR-KMS7800 $26.00 Order no. Desc. Price KR-KMS8000 Measuring System $185.00 KR-KMS7728 Met. Tape R to L $13.00 KR-KMS7729 Met. Tape L to R $13.00 Order no. Price KR-NZ03 $41.00 Order no. Description Price KR-KMS7102 Precision Mitre Gauge System $205.00 KR-KMS7101 Precision Mitre Gauge $140.00 KR-KMS7103 Precision Mitre Gauge Fence $102.00
  • 33. Want to see more? See our website for our full range of products. 31 Machinery Accessories PROFESSIONAL RIP FENCE “A stable and accurate enhancement to your 14” bandsaw. Fits most 14” machines” KREG® PRECISION BANDSAW FENCE Introduce a new level of accuracy to your band saw with our Pre- cision Band Saw Fence. We’ve designed this fence with noted band saw expert Mark Duginske to produce an unprecedented level of rigidity, adjustability, and precision. The fence is adjust- able in two dimensions for ease in setting it parallel to the blade. Cutting accuracy and repeatability is further enhanced by the precision lens cursor that reads off the included scale. Mounts to most 14 inch band saws including CARBA-TEC® , Delta, Jet, and many others. Available with an optional Micro-Adjuster and Resaw Guide that allows drift angle adjustments to made while cutting. A. B. C. D. ZERUST® ICT® VAPOUR CAPSULES These capsules emit powerful cor- rosion inhibiting mol- ecules into an enclosure that settle on metal surfaces and protect them from corrosion. DELUXE 14” BLADE GUIDE SET The addition of this fully featured top and bottom industrial style guide system will enhance the accuracy of your bandsaw beyond measure. Bottom Guide Top Guide GUIDE BLOCKS WITH ROLLER BEARINGS (SET OF FOUR) Enables more accurate, straighter cuts than standard blocks. Suits any bandsaw that accepts 1/2” x 1/2” guide blocks. BLADE BRAZING JIG For blades 1/16” to 1-1/4”. Brazed joints are stronger than the base metal of the original blade. This jig is used to repair broken band- saw blades quickly, easily and inexpensively. Kit includes: brazing jig, flux, brush, silver al- loy and instructions. A separate butane torch is required to use this brazing kit. Our pro- fessional mini butane torch is perfect for the job and also for any small brazing jobs such as in jewellery making/ repairing etc. Operat- ing temp. - 1300˚C. Torch is supplied without fuel. Note: Can be used to weld most metals except aluminium. ROUTER TABLE INSERT KIT 228 x 305mm approx. Ideal for making your own router table at home. Made from Bakelite and adaptable to accept most com- mon routers. KREG® PRECISION ROUTER TABLE INSERT PLATE This rugged 3/8” phenolic plate was de- signed to accept nearly any router, without the use of a “swiss-cheese” style pre-drilled surface. KREG® DRAWER SLIDE MOUNTING BRACKETS For both face-frame and faceless cabinets, aligning the drawer box to full-extension slides are simple with this tool. PRECISION ROUTER TABLE INSERT PLATE LEVELERS These unique levelers are the easiest way to add an insert plate to your shop-built router table. Order no. Price RF-3 $109.00 Order no. Price ZE-VC2-1 $15.00 Order no. Price SW-1401-GUIDE $99.00 Order no. Price AB-199021 $37.00 Order no. Description Price CT-BBJ Brazing Kit $37.00 MT-790 Butane Torch $37.00 Order no. Price RTS-1 $37.00 Order no. Price KR-PRS3030 $82.00 Order no. Price KR-NZ03-B $14.00 Order no. Price KR-PRS3040 $26.00 Order no. Description Price KR-KMS7200 A. Precision Bandsaw Fence $155.00 KR-KMS7213 B. 4.5” Resaw Guide $26.00 KR-KMS7214 C. 7” Resaw Guide $30.00 KR-KMS7215 D. Micro Adjuster $20.00
  • 34. For more information & to shop online go to www.carbatec.com.au32 Machinery Accessories VERITAS® POLY GAUGE This gauge, which is accurate to 1/2° on every angle, can be used for many different machines. Used flat, the gauge is ideal for setting mitre fences or for layout work. Used vertically, the slotted knob becomes a stabil- ising base that holds the gauge erect so that you have both hands free for adjusting and locking a fence or blade. Ideal for frames, tubs and planters, glued up cylinders for turning, any job that requires precise setting for 4, 5, 6, 8 or 12 sided mitres. Made from brass and hardened aluminium, the gauge measures 8-1/2” x 6” overall. 4 5 6 8 12 CARBA-TEC® 1/4HP JUNIOR POWERFEED This lightweight unit is nevertheless power- ful enough to feed stock into circular saws, spindle moulders, sanders, routers and plan- ers, etc. The three rubber roller head can be articulated vertically or horizontally to suit al- most any feeding job. Four feed speeds 5, 6.5, 8 and 11m/min are possible and give this machine the versatility needed in almost any home or small workshop. Motor is fitted with forward and reverse switch. This power feed will promote productivity in your shop and provides added safety as well. Specifications Column Diameter 50mm Max. Capacity under rollers 127mm Reach 247mm Roller Size 77mm CARBA-TEC® 1/2HP CABINETMAKERS POWERFEED This heavy duty unit has many characteris- tics that enable it to feed stock into circular saws, spindle moulders, sanders, routers and planers, etc. With its high capacity for holding, the three rubber rollers are suitable for large workpieces. The three rubber roller head can be articulated vertically or horizon- tally to suit almost any feeding job. Four feed speeds are possible 5.8, 9, 15 and 23m/ min, approx. only) and give this machine the versatility needed in almost any professional workshop. Motor fitted with forward/reverse switch. This unit will promote productivity and provide added safety too. Specifications Column Diameter 50mm Max. Capacity under rollers 177mm Reach 406mm Roller Size 100mm MORTISE CHISEL SHARPENING KIT Sharpens the inside of square chisels with a 6 flute HSS cutter. After sharpening the four outside faces, the chisel should be deburred using the flat diamond stone supplied. There is no other successful way to sharpen this type of chisel. An essential accessory for all chisel mortisers. Suit 1/4”, 3/8” and 1/2” chisels. CARBA-TEC® STANDARD MITRE GAUGE Fits most cast table machinery with 3/4” x 3/8” mitre slots, or any of our 3/4” x 3/8” mitre tracks. INCRA MITRE V27 Is engineered to provide high performance. It’s no-nonsense design and compact size make it the most affordable Incra mitre gauge ever. INCRA MITRE V120 Puts high resolution, repeatability and accu- racy within the budget or all woodworkers. An incredible 120 angle stops are laser cut into the steel protractor. INCRA 1000HD MITER GAUGE Combine a high-resolution protractor with the industry’s smoothest adjustable miter bar, a telescoping IncraLOCK Cut-off Fence & Flip Shop Stop, and a steel vernier scale that reads to 1/10° and you’ve got a winner that will improve the quality of any project. DELUXE ALIGNMENT SYSTEM Check table saw alignment, arbor shaft run-out, blade and flange run-out and fence alignment and straightness. Order no. Price 05N14-01 $51.00 Order no. Price MCS-01 $59.00 Order no. Price AF-32 $749.00 Order no. Price AF-308 $1,169.00 Order no. Price MGT-01 $32.00 Order no. Price IN-MITERV27 $79.00 Order no. Price IN-MITERV120 $109.00 Order no. Price IN-MITER1000HD $239.00 Order no. Price DAS-1 $109.00
  • 35. Want to see more? See our website for our full range of products. 33 Machinery Accessories MULTI-STOP A quick release positioner that at- taches to fences, tables and work pieces to make routing, shaping or sawing more accurate and less time consuming. POLYCARBONATE SHEETS Perfect for making custom transparent base plates, safety shields, templates, jigs, and other accessories for your workshop. UHMW POLYETHYLENE This is a type of plastic that is dense, tough, rigid, impervious to moisture and most im- portant, has a very low coefficient of friction. DRILL PRESS WORK SUPPORT STAND WITH ROLLERS Two roller stand style rollers, 450mm wide are fully adjustable, for height and width giv- ing maximum versatility. OPTIONAL MOUNTING BRACKET For mounting your power feed unit to almost any spindle moulder. Unit fits onto tables using clamping bracket and bolts. 5 PIECE MORTISE CHISEL SET Set includes 1/4”, 5/16”, 3/8”, 1/2” and 5/8” chisels with auger bits to suit. Chisels fit 3/4” bushed machines. 1.17g. CHISEL MORTISE KIT FOR DRILL PRESSES Drill square holes for mortise and tenon joints. Kit will suit the fol- lowing quill siz- es; 40, 48, 55, 60 and 66mm. Kit includes 5 piece chisel set (MCS-5). T-TRACK INTERSECTION KIT Slide your jigs and fixtures in almost any di- rection! - Used with our 3/4” wide aluminium T-track, this 4-piece kit allows you to make the T- track intersection you need. DRILL PRESS TABLE This accessory effectively expands the work area for your drill press allowing you to work with larger projects on small tables. Drill press not included. DIGITAL HEIGHT GAUGE This economically priced gauge is the per- fect addition to your machine setup kit. Used primarily on router tables and tablesaws, this gauge can also be used horizontally when positioning a fence as well. The LCD screen reports measurements in metric, imperial and fractional inches all at the touch of a button. Measurement resolution as follows: 0.05mm, 0.002” and 1/32” (±0.1mm/0.004”). The nylon body houses rare earth magnets in the feet when used vertically, allowing near hands free setup of equipment. Button cell battery included. ROCKLER MAGNETIC CORD KEEPERS No more stepping on or tripping over cords. Has a 5/16” opening that holds a standard-thickness power cord and keeps it right where you can see it. The built-in rare earth magnet is extremely strong and adheres to any ferrous metal surface, keeping your cords at a manage- able height. Order no. Price CT-MS2 $18.00 Order no. Size Price 46J86-12 1/4” $23.00 46J86-13 3/8” $36.00 Order no. Size Price 46J90-15 3/8”, 3/4”x24” $8.00 46J90-10 1/4”, 4”x24” $15.00 46J90-11 3/8”, 4”x24” $20.00 46J90-12 1/2”, 4”x24” $33.00 46J90-14 3/4”, 4”x24” $41.00 Order no. Price DP-1353 $63.00 Order no. Price CTUB-1 $90.00 Order no. Price MCS-5 $34.00 Order no. Price MAS-2-KIT $105.00 Optional square chisels for mortising WMC-14 1/4” $16.00 WMC-38 3/8” $16.00 WMC-12 1/2” $16.00 WMC-58 5/8” $24.00 WMC-34 3/4” $32.00 Order no. Price RK-22209 $30.00 Order no. Price DPT-1 $105.00 Order no. Price RHG-1 $32.00 Order no. Price RK-42388 $13.00
  • 36. For more information & to shop online go to www.carbatec.com.au34 Machinery Accessories KREG ADHESIVE TAPES - METRIC This 1/2” wide, 3.5m long, self-adhesive measuring tape fits snugly into the indentation on the topside of our Top Trak and Heavy Duty Trak. Choose the correct tape orientation left-to-right reading to the right of the saw blade, right-to-left reading to the left of the saw blade. Metallic tape is highly scuff resistant and can be trimmed to length. VERITASTM T-SLOT TRACKS A. B. C. D. E. F. G. A. A. B. C. D. F. F. G. H. H. I. I. VERITASTM BENCH BOLTS Bolts are 6” long and 1/2” in diameter. The nuts are 25x25mm and will fit per- fectly into a 1” hole. ROCKLER 915MM MULTI TRACKS FOR JIGS AND CUSTOM FENCES With Universal T-Tracks on every face, these 36” tracks are full of potential - use them to create custom fences, jigs and fixtures. Once assembled, the multiple tracks give you countless options for attaching stops, hold- downs, sub-fences and more. Available in 2-1/4” and 3” heights. ROCKLER MULTI TRACK BRACKETS Combine your Multi Tracks with these extruded aluminium brackets to form L-shaped fences. Center slots accept T-bolts (not included) to connect Multi Tracks to any built-in T-Track. Includes two brackets, eight 1/4’’-20 bolts, eight washers, and eight T-Track nuts to secure brackets to Multi Tracks (35605, 34262). Available in 50mm x 50.8mm and 32mm x 50.8mm sizes. 32” MITRE TRACK Accepts any standard mitre gauges and mitre bars at 3/4” wide and is easily installed into home-made router tables, jigs and other similar devices. ROCKLER 1.2M UNIVERSAL T-TRACK KIT Outfit your workbenches, jigs, or machine tables with the ultimate accessory track! Universal T- Track boasts a unique stacked- slot design that allows you to attach any accessory with 1/4” T-bolts, 5/16” T-bolts, or 1/4” Hex-bolts. Order no. Description Price KR-KMS7728 R to L $13.00 KR-KMS7729 L to R $13.00 Order no. Price 05G07-02 $47.00 Order no. Description Price RK-35605 2-1/4” $47.00 RK-34262 3” $61.00 Order no. Description Price RK-33338 32mm $26.00 RK-35961 50mm $26.00 Order no. Price ALMG32 $29.00 Order no. Price RK-24063 $47.00 Order no. Description Price A. 12K79-22 1/4” T-slot x 2’ $16.00 A. 12K79-24 1/4” T-slot x 3’ $23.00 A. 12K79-28 1/4” T-slot x 4’ $29.00 B. 05J21-15 1/4”-20 T-slot nuts (10 pack) $6.00 C. 12K79-70 1/4”-20 x 1” T-bolts (10 pack) $6.00 D. 12K79-72 1/4”-20 x 2” T-bolts (10 pack) $8.00 E. 12K79-80 Hex Bolt Washers (10) $9.00 12K79-32 5/16 T-slot x 2’ $21.00 12K79-34 5/16 T-slot x 3’ $30.00 12K79-38 5/16 T-slot x 4’ $40.00 12K79-60 5/16-18x1” T-slot nuts (10) $10.00 12K79-62 5/16-18x1” T-bolts (10) $8.00 12K79-64 5/16-18x2” T-bolts (10) $13.00 12K79-66 Hex Bolt Washers (10) $9.00 F. 12K79-42 2” Double T-slot $17.00 F. 12K79-44 3” Double T-slot $24.00 G. 16J60-80 Undercut Slotting Bit $32.00 H. 12K79-06 2x3/4” Slot Extrusion ea. $20.00 H. 12K79-07 3x3/4” Slot Extrusion ea. $37.00 I. 46J90-15 3/8” UHMW, 3/4” x 24” $8.00 Order no. Description Price A. KR-KMS7511 Kreg Trak Clamp $8.00 B. KR-KMS7507 Kreg Mini Trak 24” $16.00 B. KR-KMS7508 Kreg Mini Trak 36” $20.00 B. KR-KMS7509 Kreg Mini Trak 48” $25.00 C. KR-KMS7303 Kreg Jig & Fixture Bar $30.00 D. KR-KMS7432 Kreg Combo-Trak 32” $39.00 D. KR-KMS7448 Kreg Combo-Trak 48” $51.00 E. KR-KMS7712 Kreg Top Trak 24” $30.00 E. KR-KMS7714 Kreg Top Trak 48” $47.00 F. KR-KMS7702 Kreg Heavy Duty Trak 2” $51.00 F. KR-KMS7704 Kreg Heavy Duty Trak 4” $78.00 G. KR-KKS1020 Kreg Klamp Trak 33-3/4” $61.00
  • 37. Want to see more? See our website for our full range of products. 35 Machinery Accessories JIGS & FIXTURES HARDWARE The taper handle and ball, clamping, sure-grip, four-arm, wing and bar knobs are all made from durable plastics, the jig han- dle, wing nuts and thumbscrews are made from malleable iron for extended service. T-NUTS & PROPELL NUTS Available with 3, 4 or 6 prongs, each with its own advantages. Generally, 3 prong are used for plywood, 4 prong nuts are hard or soft wood, and 6 prong nuts for softer materials and composites. Sold in bags of 10. HANGER BOLTS 1/4”-20 THREAD BRASS NUTS, BOLTS & INSERTS A. B. C. D. A. B. C. D. E. A. B. C. D. E. F. G. H. G. A. B. C. D. E. F. H. J. K. L. M. N. O. P. Q. R. S. T. U. V. W. X. Y. Z. AA. BB. CC. DD. Order no. Price Description 1/4”-20tpi A 1” dia, Ball Head Knob (F), ea. 00M55-01 $3.20 B 1-1/4” dia. Ball Head Knob (M), ea. 00M55-05 $5.30 C 3-7/8” Handle (F), ea. 00M53-01 $8.40 D 3-7/8” Handle (M), ea. 00M53-02 $15.80 E 1” Clamping Knob (F), ea. 00M56-20 $3.20 F 1” Clamping Knob (M), ea. 00M56-21 $3.20 G 1-3/4” Clamping Knob (F), ea. 00M56-10 $4.20 H 1-3/4” Clamping Knob (M), ea. 00M56-11 $5.30 J. 1-1/2” Sure-Grip (F), ea. 00M55-20 $4.20 K. 1-1/2” Sure-Grip (M), ea. 00M55-21 $4.20 L. 1-1/2” Four-Arm Knob (F), ea. 00M55-30 $6.30 M. 1-1/2” Four-Arm Knob, (M), ea. 00M55-31 $4.20 N. 1-1/8” Wing Knob (F), ea. 00M51-01 $3.20 O. 1-1/8” Wing Knob (M), ea. 00M51-02 $3.20 P. 1-1/2” Wing Knob (F), ea. Q. 1-1/2” Wing Knob (M), ea. R. 2” Wing Knob (F), ea. 00M52-01 $5.30 S. 2” Wing Knob (M), ea. 00M52-02 $5.30 T. 2” Bar Knob (F), ea. 00M55-10 $8.40 U. 2” Bar Knob (M), ea. 00M55-11 $5.30 V. 2” Four-Arm Knob (F), ea. 00M55-40 $5.30 W. 2-1/4” Pentagon Knob (F), ea. 00M50-01 $3.20 X. 1-1/2” Rose Knob, ea. 00M40-01 $2.10 Y. Knurled Knobs (4)* 00M40-02 $3.20 Z. 1-1/4” T-Knobs (4) 00M40-03 $3.20 AA. Nylon Washers (10) 00M40-23 $3.20 BB. Jig Handle 00N36-01 $7.40 CC. Wing Nut, ea. 00M54-01 $4.20 DD. 1/2” Thumbscrew, ea. 00N35-02 $9.50 3/4” Thumbscrew, ea. 00N35-03 $9.30 1” Thumbscrew, ea. 00N35-04 $9.50 1-1/2” Thumbscrew, ea. 00N35-06 $10.00 Description Order no. Price A. 1” Bolts (10) 01Z02-01 $2.10 B. 1-1/2” Bolts (10) 01Z02-15 $2.10 C. 2” Bolts (10) 01Z02-20 $2.10 D. 2-1/2” Bolts (10) 01Z02-25 $2.10 E. 1-1/2” Insert Bolts (10) 00M93-01 $9.50 Description Order no. Price 1/4”-20 Thread A. 1” RH Bolts (10) 44Z08-03 $6.30 1” RH Bolts (25) 44Z08-01 $12.60 B. 1” FH Bolts (10) 44Z08-04 $6.30 1” FH Bolts (25) 44Z08-02 $12.60 C. 2” RH Bolts (10) 44Z09-03 $11.60 2” RH Bolts (25) 44Z09-01 $21.00 D. 2” FH Bolts (10) 44Z09-04 $11.60 2” FH Bolts (25) 44Z09-02 $21.00 E. Knurled Screw ea. 00M91-01 $6.30 F. Insert Nuts (10) 00M90-01 $14.70 G. Speed Nuts (4) 05F01-03 $16.80 H. 24” Rod ea. 05F01-04 $5.30 Order no. Price 5/16”-18 Thread 44Z08-13 $10.50 44Z08-11 $26.30 44Z08-14 $10.50 44Z08-12 $26.30 44Z09-13 $17.90 44Z09-11 $42.00 44Z09-14 $17.90 44Z09-12 $42.00 00M95-01 $6.30 00M94-01 $14.70 12K79-81 $5.30 Description Order no. Price 1/4”-20 Thread A. 3-prong T-Nuts (10) 00N22-03 $2.10 B. 4-prong T-Nuts (10) 00N22-04 $2.10 C. 6-prong T-Nuts (10) 00N22-06 $2.10 D. Propell Nuts (10) 00N23-01 $3.20 Order no. Price 5/16”-18 Thread 00N52-03 $2.10 00N52-04 $2.10 - 00N32-01 $3.20 Order no. Price 5/16”-18tpi 00M77-01 $3.20 00M75-05 $5.30 00M73-01 $8.40 00M73-02 $15.80 00M76-20 $3.20 00M76-21 $3.20 00M76-10 $4.20 00M76-11 $5.30 00M75-20 $4.20 00M75-21 $4.20 00M75-30 $6.30 00M75-31 $4.20 00M71-01 $4.20 00M71-02 $4.20 00M72-01 $5.30 00M72-02 $5.20 00M75-10 $8.40 00M75-11 $5.30 00M75-40 $5.30 00M70-01 $3.20 00M60-01 $2.10 00M60-02 $3.20 00M60-03 $3.20 00M60-23 $3.20 00N56-01 $7.40 00M74-01 $4.20 00N55-02 $9.50 00N55-03 $9.30 00N55-04 $9.50 00N55-06 $10.00 Order no. Price 3/8”-16 Thread 00N22-23 $2.10 00N22-24 $2.10 00N22-26 $2.10 00N23-02 $4.20
  • 38. For more information & to shop online go to www.carbatec.com.au36 SLEEVELESS DRUM SAND- ING SET Set includes 1”x3”, 2-1/2” x 3”, 2”x3”, 3”x3” drums. Also included are two 1/2” and two 1/4” drive shafts. For use in drill press only. 20 PIECE LONG SERIES SANDING SET Set includes: 1/2”, 3/4”, 1” and 1-1/2” diameter spindles. All spindles are 2-1/2” long. Two 80 and 120 grit sanding sleeves are included for each drum. PNEUMATIC DRUM SLEEVE SANDER 110x150mm with 5/8” x 11tpi LH fe- male thread, Suits most grinders, please confirm spindle size before ordering. Includes sanding sleeve. 20 PIECE MID LENGTH SANDING SET (BOXED) Diameter: 1/2”, 3/4”, 1”, 1-1/2” Length: 2”, 2”, 2”, 2” CLOTH BACKED SANDING KIT Kit contains 4 rolls of 25mm x 6m with the following grits: 150, 240, 320 and 400. BELT/DISC CLEANING STICKS 1/4” & 5/16” 149 PIECE HARDWARE FITTING KITS Get all the components that you need in this master kit of jig and fixture fittings. Available in 1/4” and 5/16” thread configurations. Kits Includes: 20 x 1” T-Bolts, 10 x 2-1/2” T-Bolts, 20 x 1-1/2” T-Bolts, 10 x 3-1/2” T-Bolts, 16 x T-Nuts, 10 x 1” Round Insert Knobs, 6 x 2” T-Insert Knobs, 6 x Four Wing Bolt Knobs, 4 x Five Wing Bolt Knobs, 6 x Four Wing Insert Knobs, 4 x Five Wing Insert Knobs, 16 x Threaded Inserts, 20 x Washers. Machinery Accessories SMALL & LARGE DELUXE HOLD DOWN CLAMPS Made from anodised alu- minium. Designed to fit into a 1/4” or 5/16” t-track. Ideal for router tables or jigs. A. B. CAM CLAMP MECHANISM This cam clamp can exert as much as 400lb of force using only a thumb and forefinger to operate the handle. FENCE CLAMP (Pair) These allow you to use auxiliary fences in conjunction with your existing fences without the clamps getting in the way. GOOD HAND TOGGLE CLAMPS A. C. B. INCRA® BUILD-IT SYSTEM STARTER KIT Your new Incra® Build-It System Starter Kit provides all of the Build-It System compo- nents you’ll need to produce many different beneficial jigs! Kit includes all of the Build-It System Components you’ll need to produce all of the beneficial jigs and more. Just con- nect the parts! Order no. Price DRUM-SET-4 $75.00 Order no. Desc. Price DRUM-20L Sanding Set $25.00 DRUM-20LS Rep. sleeves $11.00 Order no. Price A5-455 $69.00 Order no. Price DRUM-SET-20 $25.00 Order no. Price SPS95-01 $24.00 Order no. Size Price BELT-CLEANER-M 32x32x200mm $7.00 BELT-CLEANER-L 50x50x200mm $12.00 Order no. Description Price CYH-912 Small, holds 75x85mm, ea. $8.00 CYH-283 Large, holds 90x70mm, ea. $10.00 Order no. Description Price A. 05J51-01 1/4-20 $8.00 B. 05J51-05 5/16”-18 $8.00 Order no. Price CYH-373 $20.00 Order no. Hold Cap. Length Clamp Cap. Price A. Horizontal Handled Toggle Clamps GH-200W 400kg 240mm 57mm $19.00 GH-225D 227kg 173mm 37mm $16.00 GH-201C 100kg 143mm 25mm $14.00 GH-20400 20kg 66mm 10mm $14.00 B. Push/Pull Toggle Clamp GH-302F 136kg 137mm 32mm $21.00 C. Vertical Handled Toggle Clamps GH-101EL 360kg 145mm 50mm $21.00 GH-11401 100kg 70mm 22mm $14.00 GH-12050 91kg 65mm 25mm $14.00 GH-101A 50kg 50mm 17mm $13.00 Order no. Price IN-BKITSTART $155.00 Order no. Description Price 00H21-49 1/4” kit $69.00 00H31-49 5/16” kit $69.00
  • 39. Want to see more? See our website for our full range of products. 37 Machinery Accessories ABRASIVE SANDING BLOCKS Approx. size 80x45x20mm. These blocks are solid abra- sive in a rubberised compound. The abrasive never wears out until the whole block is worn away. GRAPHIC SLIP CLOTH Graphite slip cloth is glued to the platen on sanding machines greatly reducing the fric- tion between the back of the moving paper and the platen. This has the effect of greatly increasing the usable HP of the machine. REPLACEMENT BELTS REPLACEMENT VELCRO STYLE HOOK & LOOP DISCS COLOUR CODED SANDPAPER DESIGNED FOR EASY IDENTIFICATION CLOTH BACKED SANDPAPER HOOK & LOOP VELCRO STYLE BACKING PAD WITH SELF ADHESIVE BACK (each kit includes 1x120 grit disc) WET & DRY PAPER VELCRO SANDSHEET Order no. Grit Price RAB-060 60 grit $7.00 RAB-120 120 grit $7.00 Order no. Length(mm) Grit Price TO SUIT SB-609 & SBD-6012QC SB-1220-60 150 x 1220 60 $18.00 SB-1220-80 150 x 1220 80 $18.00 SB-1220-120 150 x 1220 120 $18.00 SB-1220-180 150 x 1220 180 $18.00 SB-1220-240 150 x 1220 240 $18.00 SB-1220-320 150 x 1220 320 $18.00 TO SUIT BB-80S SB-2260-60 150 x 2260 60 $26.00 SB-2260-80 150 x 2260 80 $26.00 SB-2260-120 150 x 2260 120 $26.00 SB-2260-180 150 x 2260 180 $26.00 SB-2260-240 150 x 2260 240 $26.00 SB-2260-320 150 x 2260 320 $26.00 TO SUIT BDS-48 SB-915-60 100 x 915 60 $10.00 SB-915-80 100 x 915 80 $10.00 SB-915-120 100 x 915 120 $10.00 SB-915-180 100 x 915 180 $10.00 SB-915-240 100 x 915 240 $10.00 SB-915-320 100 x 915 320 $10.00 TO SUIT OBS-6108 SB-2743-60 150 x 2743 60 $32.00 SB-2743-80 150 x 2743 80 $32.00 SB-2743-120 150 x 2743 120 $32.00 SB-2743-180 150 x 2743 180 $32.00 SB-2743-240 150 x 2743 240 $32.00 SB-2743-320 150 x 2743 320 $32.00 Order no. Style Grit Price 6” Hook & Loop Sanding Discs SD-6-60 Hook & Loop 60 $3.00 SD-6-80 Hook & Loop 80 $3.00 SD-6-120 Hook & Loop 120 $3.00 SD-6-180 Hook & Loop 180 $3.00 SD-6-240 Hook & Loop 240 $3.00 SD-6-320 Hook & Loop 320 $3.00 TO SUIT DE-31-340 SD-8-60 Hook & Loop 60 $4.00 SD-8-80 Hook & Loop 80 $4.00 SD-8-120 Hook & Loop 120 $4.00 SD-8-180 Hook & Loop 180 $4.00 SD-8-240 Hook & Loop 240 $4.00 SD-8-320 Hook & Loop 320 $4.00 TO SUIT SB-609 SD-9-60 Hook & Loop 60 $6.00 SD-9-80 Hook & Loop 80 $6.00 SD-9-120 Hook & Loop 120 $6.00 SD-9-180 Hook & Loop 180 $6.00 SD-9-240 Hook & Loop 240 $6.00 SD-9-320 Hook & Loop 320 $6.00 TO SUIT OBS-6108 SD-12-60 Hook & Loop 60 $8.00 SD-12-80 Hook & Loop 80 $8.00 SD-12-120 Hook & Loop 120 $8.00 SD-12-180 Hook & Loop 180 $8.00 SD-12-240 Hook & Loop 240 $8.00 SD-12-320 Hook & Loop 320 $8.00 Order no. Length(mm) Grit Price SPR-RED-80 300mmx2m 80 $18.00 SPR-WHITE-120 300mmx2m 120 $18.00 SPR-YELLOW-180 300mmx2m 180 $18.00 SPR-BLUE-240 300mmx2m 240 $18.00 SPR-ORANGE-320 300mmx2m 320 $18.00 SPR-GREEN-400 300mmx2m 400 $18.00 Order no. Type Grit Price WD-600 W/proof Abrasive 600 $2.00 WD-800 W/proof Abrasive 800 $2.00 WD-1200 W/proof Abrasive 1200 $2.00 WD-2000 W/proof Abrasive 2000 $2.00 Order no. Size Grit Price SSV-80 115 x 230 80 $2.00 SSV-120 115 x 230 120 $2.00 SSV-180 115 x 230 180 $2.00 SSV-240 115 x 230 240 $2.00 SSV-320 115 x 230 320 $2.00 SSV-400 115 x 230 400 $2.00 Order no. Width Price GRAPHITE-100MM 100mm $19.00 GRAPHITE-150MM 150mm $29.00 Order no. Type Grit Price SP-4-80 4” Flex Cloth 80 $6.00 SP-4-120 4” Flex Cloth 120 $6.00 SP-4-180 4” Flex Cloth 180 $6.00 SP-4-240 4” Flex Cloth 240 $6.00 SP-4-320 4” Flex Cloth 320 $6.00 SP-4-400 4” Flex Cloth 400 $6.00 Order no. Style Price SDS-6-KIT 6” H & L Starter Kit $12.00 SDS-8-KIT 8” H & L Starter Kit $20.00 SDS-9-KIT 9” H & L Starter Kit $25.00 SDS-12-KIT 12” H & L Starter Kit $33.00 SDS-20-KIT 20” H & L Starter Kit $129.00
  • 40. Woodturning & Accessories 38 For more information & to shop online go to www.carbatec.com.au Specifications Motor 1/2hp, 240v Swing over bed capacity 260mm Max. distance between centres 440mm Spindle thread M30x3.5 Hole through tailstock 10mm Spindle RPM 5 Speed-500 to 3,200 Morse taper MT2 Shipping/Net Weight 35/33kg WOODFAST WM-305 MIDI LATHE Full, heavy cast iron construction provides heft and minimises vibra- tion. The belt cover is easily removed for belt and pulley adjustments. A mechanical catch holds the cover in place. Specifications Motor 1/2hp, 240v Swing over bed capacity 300mm Max. distance between centres 420mm Spindle thread M30x3.5 Hole through tailstock 10mm Spindle RPM 6 Speed-360 to 3,250 Indexing positions 12 Morse taper MT2 Shipping/Net Weight 52/48kg CARBA-TEC® ECONOMY MINI LATHE A small, well priced lathe with five spindle speeds. The headstock, bed and tailstock are constructed of cast iron and the 375W induc- tion motor has more than enough power for the type of projects likely to be produced on a lathe of this size. Comes complete with drive centre, revolving tailstock centre, and 80mm diameter faceplate JET MINI LATHE • Heavy-duty cast iron lathe bed, headstock and tailstock en- sures stability, rigidity, strength and minimal operating vibration. • Quick release levers allow for easy & accurate positioning of tool rest and tailstock • Convenient adjustment handle to easily tilt motor while chang- ing speeds • Solid tailstock contains live centre with a full 50 mm travel JET MIDI LATHE JWL-1220 • Heavy-duty cast iron lathe bed, headstock and tailstock ensures stability, rigidity, strength and minimal operating vibra- tion. • Quick release levers allow for easy & accurate positioning of tool rest and tailstock Specifications Motor 370w 230v 10A Swing over bed capacity 254mm Bed length 621mm Spindle thread 1”x10TPI Hole through tailstock 9mm Spindle RPM 400/700/1000/1500 /2200/3300 rpm Morse taper MT2 Workshop footprint 630x200x360mm Shipping/Net Weight 38/35kg Specifications Motor 550w 230v 10A Swing over bed capacity 304mm Bed length 766mm Spindle thread 1” x 10TPI Hole through tailstock 9mm Spindle RPM 400/700/1000/1500/2200/3300 rpm Morse taper MT2 Workshop footprint 810x300x390mm Shipping/Net Weight 48/45kg Order no. Description Price MC1018 Economy Mini Lathe $295.00 MC1018-EXT Extension Bed $105.00 Order no. Description Price WM-305 Woodfast Midi Lathe $419.00 WBE-25 Bed Extension $83.00 WMLS-36 Floor Stand $125.00 WSE-24 Stand Extension $83.00 Order no. Price JET-JML1014I $429.00 Order no. Price JET-JWL1220 $559.00
  • 41. Woodturning & Accessories 39Want to see more? See our website for our full range of products. CARBA-TEC® WOODLATHE Headstock locks in four positions for outboard turning, cast iron bed, hollow headstock with No.2 MT & M30 x 3.5 spindle, inc. stand, 300mm tool rest, face plate, drive centre revolving centre and hollow tailstock with No. 2 MT. Specifications Motor 3/4hp, 240v, 550W Swing over bed capacity 300mm Bed length 900mm Spindle thread M30x3.5 Hole through tailstock 10mm Spindle RPM Variable -500-2000 Morse taper MT2 Headstock movement Swivels 360° Workshop Footprint 1620x400x1120mm Shipping/Net Weight 85/80kg CARBA-TEC® WOODLATHE Headstock rotates 360° and locks in four positions for outboard turning. Cast iron bed, hollow headstock with No.2 MT & M30 x 3.5 spindle. This great new lathe includes cast iron stand with tool tray, 300mm tool rest with 2 piece articulated banjo, face plate, drive centre, revolving centre and hollow tailstock with No. 2 MT. Variable speeds between 500 - 2000 rpm. Specifications Motor 1-1/2hp, 240v Swing over bed capacity 410mm Bed length 1130mm Spindle thread M30x3.5 Hole through tailstock 15mm Spindle RPM Variable - 500 to 2000 Morse taper MT2 Headstock movement Swivels 360° Workshop Footprint 2000x450x1200mm Shipping/Net Weight 150/140kg CARBA-TEC® VARIABLE SPEED LATHE Heavy duty, cast-iron bed for added stability and minimal vibration. Electronic variable speed drive, select from seven speeds ranging between 50 to 3790 rpm. Four inch tailstock travel. 14” tool rest and a 6” face plate included. Specifications Motor 1-1/2hp, 240v Swing over bed capacity 406mm Bed length 1100mm Spindle thread M30x3.5 Hole through tailstock 9.5mm Spindle RPM Variable - 50 to 3790 Indexing positions 12 Morse taper MT2 Headstock movement Swivels 360° and slides Workshop Footprint 1800x600x1400mm Shipping/Net Weight 185/160kg JET MIDI LATHE VARIABLE SPEED • Heavy-duty cast iron lathe bed, headstock & tailstock ensures stability, rigidity, strength & minimal operating vibration. • Quick release levers allow for easy & accurate positioning of tool rest & tailstock • Solid tailstock contains live centre with a full 50 mm travel Specifications Motor 550w 230v 10A Swing over bed capacity 304mm Bed length 766mm Spindle thread 1”x10TPI Hole through tailstock 9mm Spindle RPM 200-4300 rpm Morse taper MT2 Workshop footprint 850x300x390mm Shipping/Net Weight 48/45kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Description Price MC900 Carba-Tec® Woodlathe $495.00 MCLEG Cast Iron Legs $159.00 MCREST 3-Point Steady Rest $52.00 Order no. Price MC1100A $839.00 Order no. Price CT-25650 $2,495.00 Order no. Price JET-JWL1220VS $849.00
  • 42. Woodturning & Accessories 40 For more information & to shop online go to www.carbatec.com.au TEKNATOOL NOVA COMET II MIDI LATHE Portable, space saving - yet delivers the capacity and the rugged stability of larger lathes. Perfect for a wide range of Wood Working projects. Specifications Motor 3/4hp, 240v 1ph 50Hz Swing over bed capacity 300mm Max. distance between centres 419mm Spindle thread 1” 8TPI RH Hole through tailstock 12mm Spindle RPM 250-4000rpm Indexing positions 12 Morse taper MT2 Headstock movement Fixed Shipping/Net Weight 37/34kg TEKNATOOL DVR 2024 LATHE The NOVA DVR 2024 is a unique lathe which provides an unparalleled versatility, power and capability to your Wood Turning. Equipped with our innovative wireless remote control, the NOVA 2024 delivers the flexibility to meet the demands of 21st century Wood Turning. Specifications Motor 2.3hp, 240v 1ph 50Hz Swing over bed capacity 508mm Max. distance between centres 600mm Spindle thread 1-1/4” x 8TPI RH Hole through tailstock 15mm Spindle RPM 100-5000rpm Indexing positions 24 Morse taper MT2 Headstock movement 360° Shipping/Net Weight 200/kg NOVA 1624-44 LATHE A great lifetime lathe - packed with features that you’d expect from a much more expensive lathe. The most versatile lathe on the market which allows you to complete more wood turning projects than any other lathe in its class. Key Features: Incredibly Versatile, 50% more power, greater capacity, great speed range, full 360° swivel head and extendable beds. Unit includes M30 x 3.5 spindle thread adaptor. Colour may vary from that shown. NOVA DVR XP LATHE Is the worlds only intelligent lathe, combining the best features of stationary lathes - power, capacity and capability - with state of the art technology to make your turning more efficient, fun and safer. Key Features: Incredibly Versatile, Intelligent control with Adaptive ControlTM Software, Faster, more efficient turning, stationary lathe ca- pabilities in a compact workspace and energy efficient. Unit includes M30 x 3.5 spindle thread adaptor. Colour may vary from that shown. Specifications Motor 2hp, 230v, 10A Swing over bed capacity 400mm Max. distance between centres 600mm Spindle thread 1-1/4” x 8TPI Hole through tailstock 15mm Spindle RPM 178 to 3000 Indexing positions 24 Morse taper MT2 Headstock movement 360° Shipping/Net Weight 88/82kg Specifications Motor 1-1/2hp Swing over bed capacity 400mm Max. distance between centres 600mm Spindle thread 1-1/4” x 8TPI Hole through tailstock 15mm Spindle RPM 178 to 3000 Indexing positions 24 Morse taper MT2 Headstock movement Full 360° Shipping/Net Weight 120/114kg Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price TK-COMET $639.00 Order no. Price TK-24 $3,795.00 Order no. Price TK-DVR-XP $2,495.00 Order no. Price TK-1624-44 $1,395.00
  • 43. Woodturning & Accessories 41Want to see more? See our website for our full range of products. NOVA SHARPENING SYSTEM Will transform your standard bench grinder into a precision grinding machine, but without the cost. A combination of the slide- way grinding jig and the power- ful fingernail jig into one versatile sharpening tool. It utilizes a stur- dy platform and a unique sliding base to achieve the ultimate in sharpening. NOVA FINGERNAIL JIG Delivers excellent value for mon- ey, bringing benefits which are usually only found on expensive sharpening centres. It uses an extruded aluminium base with quick cam lock release via a comfortable rubber handle. The same finger jig as on the Nova Sharpening Centre is used, with the same tru-track ball, light- weight but strong design. ROBERT SORBY TEXTURING TOOL The Texturing Tool enables the turner to alter the visual and tactile qualities of a work piece by creating striations, whorls, an orange peel effect and more. ROBERT SORBY SPIRALING SYSTEM Barley twists, spirals and flutes have always represented a problem for the woodturner. The System not only overcomes many of these difficulties, but also allows the turner’s imagination to run wild as he enters a new field of decoration. Based on the same prin- ciple as the texturing tool, it is simple to use even in the hands of a novice. ROBERT SORBY STEBCENTRES The original Stebcentre is an invaluable ac- cessory for every woodturner. Inspired by Norwegian turner Petter Herud, Revolving (or Live) Stebcentres have been introduced. These offer the same degree of security, but also allow basic off-centre turning. ROBERT SORBY 12 PIECE UNIVERSAL MICRO TURNING SYSTEM This range of tools is centred on a comfort- able aluminium handle into which a series of micro tools can be fitted. The set includes Handle, hey key and 12 blades; 13mm roughing gouge, 13mm parting tool, 13mm gouge, 4mm beading & parting tool, boring tool, swan neck hollowing tool, 6mm skew, round nose scraper, curved undercut scrap- er, french curve scraper, diamond undercut scraper, 6mm spindle gouge. A premier manufacturer of specialist woodworking tools with a herit- age dating back more than 200 years. During that time Robert Sorby has developed a global reputation for manufacturing the finest edge tools available. Robert Sorby proudly continues this manufacturing tra- dition from their base in Sheffield, England. ROBERT SORBY EXCELSIOR CHISEL RANGE This range has been designed with the connoisseur woodturner and those who regularly turn hardwoods in mind. A plasma bonded titanium nitride finish layered over traditional triple tempered high-speed steel provides longevity and edge retention. SPRING CALIPER & DIVIDER Sets include 1 inside caliper, 1 outside caliper and 1 spring di- vider. Two sets available, 150mm and 200mm. ROCKLER CALIPER GAUGE/CENTER FINDER Quickly set calipers to any 1/8” increment between 0 and 5”. The center of the gauge fea- tures a vertical line for finding the center on round or square stock. Gauge is made of dura- ble black plastic and features easy-to-find white measurement markings. Patend Pending. Im- perial only. Order no. Price RSB-888SET $205.00 Order no. Price RSB-310H $99.00 Order no. Price RSB-330H $225.00 Order no. Size Price RSB-STB250 1/2” $73.00 RSB-STB200 7/8” $73.00 RSB-STB232 1-1/4” $83.00 Order no. Size Price RSB-84214 1/4” Bowl $75.00 RSB-84238 3/8” Bowl $89.00 RSB-84212 1/2” Bowl $112.00 RSB-84014 1/4” Spindle $42.00 RSB-84038 3/8” Spindle $48.00 RSB-84012 1/2” Spindle $59.00 RSB-84334 3/4” Roughing $95.00 Order no. Description Price CT-154120 6” Set $24.00 CT-154130 8” Set $34.00 Order no. Price TK-35018 $179.00 Order no. Price TK-35053 $129.00 Order no. Price RK-34010 $8.00
  • 44. Woodturning & Accessories 42 For more information & to shop online go to www.carbatec.com.au BOWL TOOL- REST 25.4mm shank for super strong plat- form, solid cast iron for maximum strength, special curved design makes bowl turning easier. Ideal for use with outrigger ac- cessory. SPANNER Fits all NOVA chucks. De- signed to unscrew the chuck from the lathe. Can be used as the body grip handle for origi- nal NOVA chuck, SuperNova and SuperNova2 chucks. SWING AWAY MOUNT Space saving - at- tach an extra lathe bed extension (not included) for longer projects, swing the bed out of the way and save space when you don’t need the extra capacity. CENTRE SYSTEM Unique combination system provides com- prehensive tailstock support for all wood- turning requirements. Over 6 functions in one handy unit. Includes quick change 2MT tapers. BED EXTENSION Trapezoidal design, computer designed for maximum strength, heavy-duty cast iron, easy fit to Nova lathes, each unit gives 510mm between centre capacity. 13kg. OUTRIGGER Articulated design, very quick and easy to move into posi- tion, heavy-duty cast iron, Quick lock cam action, fast, positive locking action. LATHE HANDWHEEL The handwheel unit is used on the outboard end of the headstock spindle. It can be used to position work by hand or to slow down the spindle by hand. CAST IRON STAND CAD designed for exceptional structural strength. Compact footprint takes up less space, but achieves maximum strength and rigidity. Heavy-duty cast iron construction. TOOLRESTS 25.4mm shank for super strong platform, cast iron with ribbing to maximise ri- gidity. Small size makes it perfect for smaller projects. TOOLREST COLLAR A simple collar to pro- vide fixed height for the toolrest, saving the turner from having to find the same height again each time. 90MM TEKNATOOL NOVA G3 KEY OPERATED CHUCK Ideal for those with mid-size lathes. Good all-round chuck for the beginner or inter- mediate user or as a second chuck for the advanced turner. Takes all accessory jaws. Keyed chucks offer an the advantage of one handed operation. Features Include: • Fully backwards compatible with Super Nova and Nova Chuck Jaw sets and inserts.  • Jacobs style chuck key with large, easy grip handle.  • Fitted with 50mm Jaws as standard. • Expanding Mode- holds work from 53- 72mm • Contracting Mode- holds work from 42- 63mm When ordering your chuck please specify the required insert reducer to match your lathe spindle thread. Price Includes Insert. 100MM TEKNATOOL SUPERNOVA2 KEY OPERATED CHUCK Ideal for those with lathes up to 508mm swing. Brilliant all-round chuck for the ma- jority of users, from beginner to advanced. Takes all accessory jaws. Keyed chucks offer the advantage of one handed operation. Features Include: • Fully sealed composite backing plate.  • Fully backwards compatible with Super Nova and Nova Chuck Jaw sets and inserts.   • Fitted with 50mm Jaws as standard. • Expanding Mode-holds work from 53- 72mm • Contracting Mode- holds work from 42- 63mm When ordering your chuck please specify the required insert reducer to match you lathe spindle thread. Price Includes Insert. Order no. Price TK-REST-BOWL $52.00 Order no. Price TK-SPANNER $18.00 Order no. Price TK-SWINGAWAY $159.00 Order no. Price TK-CENTRE $79.00 Order no. Price TK-BEDEXTN $249.00 Order no. Price TK-OUTRIGGER $339.00 Order no. Price TK-HANDWHEEL $37.00 Order no. Price TK-STAND-CAST $539.00 Order no. Price TK-REST-100MM $39.00 Order no. Price TK-COLLAR $20.00 Order no. Price TK-G3 $169.00 Order no. Price TK-SN2 $199.00
  • 45. Woodturning & Accessories 43Want to see more? See our website for our full range of products. 75MM BOWL JAWS The dovetail walls are 3 x the thickness of conventional jaw types for rugged work hold- ing for larger/heavier bowl work. Deep smooth walled dovetails holds wood gently but very firmly. FACEPLATE RINGS The Nova faceplate rings are designed for use with the Nova and SuperNova accessories, when you want to ensure an extra solid work holding method. STEP JAW SET Designed primarily to grip in the contract- ing mode, the base (foot) of footed bowls. Provides optimum gripping for three base sizes with minimal crush damaged wood. 35MM BOWL JAWS The 35mm bowl jaws fit perfectly into the current jaw range, picking up a small gap left between the 25mm and the 50mm jaws. These jaws are perfect for small to medium sizes with maximum grip, provided by the dovetail. 100MM JAW SET The 100mm jaw sets are designed for an expanded dovetail grip (up to 14” dia. bowls), reverse dovetail grip for gripping footed bowls, limited spigot facility (up to 6” long) and provision to mount false wooden jaws. 75MM LONG NOSED JAWS A 50mm 2” rise above their mounting base means very long reach deep inside of bowls. Tremen- dous holding power externally and internally. COLE JAW SET This versatile set designed primarily for the re-chuck- ing of bowls to remove the chuck marks or to re-shape the bottoms of bowls that have already been turned. Bowls up to 254mm in dia. can be accommodated. SPIGOT JAWS Available in two different internal sizes, 35mm and 45mm. Designed to grip both in the contracting (gripping round or square spigots) and in the expanding mode with up to 10” long work pieces. Their serrated tooth form makes for a very power- ful grip that just won’t let go. COLE JAW SET Designed for re-chucking of bowls to remove chuck marks or to re-shape the bottoms of bowls that have already been turned. Other Nova jaw sets can be fitted to the Cole Jaws making a combination jaw facility. Mini Cole jaws are suitable for lathes with a minimum 203mm swing diameter. 25MM JAW SET Designed for small bowl (expanding dovetail mounting up to 6” dia) and small spigot (con- tracting mode) free end turning work (up to 5” long). 130MM JUMBO JAW SET Designed to handle very large work up to 740mm (29”) in diameter. With these jaws you don’t run out of capacity using the Nova Chuck. 50MM JAW SET These jaws are standard with all Teknatool chuck standard versions (excluding Nova Titan, which has the Powergrip Jaw as standard). 25MM PIN JAW SET These extended jaws are de- signed to act like a pin chuck - expanding into a pre-bored hole. This is a useful technique for free form edge bowls. NOVA MINI JAWS PACKAGE NOVA Mini jaws set is designed to enrich NOVA jaw offering in mini turning area. This package consists of 4 types of jaws: NOVA 20mm jaw, NOVA Mini Spigot jaw, NOVA Mini Step Jaw and NOVA 70mm jaw, . They are ideal to use on NOVA Midi chuck for midi/mini work. BENEFITS & FEATURES • A great range of smaller projects can be mounted and turned using either the expansion mode (mostly for bowls) or the contraction mode (mostly for spigots) • Made from medium tensile carbon K1045 steel to provide maximum structural strength. • Standard Woodworm Screw can be used with these jaws • Able to be used on all Teknatool Chucks in the range. TK-JS70NTK-6025 TK-6026 TK-JS20N Features standard on all NOVA Jaws: Full Cross Function: Only NOVA Chucks give you the same jaw fix- ing system and same insert/adaptor system across all chuck models. This means all accessory jaws in the range fit all the chucks in the range, including older chuck models*, giving you the ultimate flex- ibility. In buying a NOVA chuck, you can be confident that whether you want to move up or down the range, any accessories you have invested in will Fit. $57.00 $57.00 $65.00 $45.00 Order no. Price TK-6014 $71.00 Order no. Price TK-JS75DT $65.00 Order no. Price TK-6019 $45.00 Order no. Price TK-JS100N $63.00 Order no. Price TK-6017 $79.00 Order no. Price TK-JSCOLE $85.00 Order no. Price TK-6006 $85.00 Order no. Price TK-JS25N $45.00 Order no. Price TK-JS130N $69.00 Order no. Price TK-JS50N $52.00 Order no. Price TK-JSPIN $65.00 Order no. Description Price TK-6000 75mm dia. $35.00 TK-6001 125mm dia. $45.00 TK-6002 158mm dia. $49.00 Order no. Description Price TK-SP35 35mm dia. $55.00 TK-SP45 45mm dia. $57.00 Order no. Description Price TK-6025 Mini Step Jaws $57.00 TK-JS70N 70mm Bowl Jaw $57.00 TK-6026 Mini Spigot $65.00 TK-JS20N 20mm Jaw $45.00
  • 46. Woodturning & Accessories 44 For more information & to shop online go to www.carbatec.com.au PREMIUM DRIVE CENTRE (9.5MM) 4 Prong 9.5mm (3/8”) diameter drive centre available in 2MT. Made in UK. 177g. PREMIUM DRIVE CENTRE (16MM) 4 Prong 16mm (5/8”) diameter drive centre available in 2MT. Made in UK. CARBA-TEC® STEEL FACEPLATES One of the things that we get asked for all the time are quality faceplates. We have finally found some that fit the bill. They suit our most popular thread sizes of 1-1/4” x 8tpi and the Australian standard M30 x 3.5. Three diam- eters are available: 75, 100 and 150mm. PREMIUM DRIVE CENTRE (25MM) 4 Prong 25mm(1”) diameter drive centre available in 2MT. Made in UK. PREMIUM DRIVE CENTRE (38MM) 4 Prong 38mm (1-1/2”) diameter drive cen- tre available in 2MT. Made in UK. PREMIUM HOLLOW ROTATING DRIVE CENTRE (8MM) One of the stars of the CARBA-TEC® wood- turning accessory range, this hollow rotating centre with its anti-split locating ring, choice of removable short or long points, twin ball bearings and 8mm (5/16”) diameter through hole. The short point protrudes a mere 3mm beyond the ring and allows an accurate im- pression of the ring to be made on the end of the timber. Made in UK. 247g. PREMIUM UNIVERSAL MULTI-HEAD LIVE CENTRE KIT We think that this is the best universal live centre available today. There are two sealed bearings in the body and the working end has a taper for mounting the various inter- changeable tips, guaranteeing that they run perfectly concentric. The centre is supplied with three tips, a standard 60° cone for gen- eral work, a 9.5mm (3/8”) diameter by 16mm (5/8”) long point for small or close work and a cup or ring centre for open grain or split turning. Made in UK. 660g. PREMIUM 90° LIVE CENTRE (22MM) Our miniature live revolving centre has a 22mm diameter head and twin bearings. Tool access is important when turning small items and, the 90° nose has far less tendency to act as a wedge when small or open grained timbers are used. Made in UK. 215g. ECONOMY LIVE CENTRES PREMIUM 60° LIVE CENTRE This 60° live revolving centre is made from top quality materials, incorporates two ‘sealed for life’ dust proofed bearings and will cover 90% of all turning applications. Made in UK. 307g. DRILL CHUCKS WITH NO. 1 OR 2 PREMIUM HOLLOW DEAD CENTRE (8MM) This very versatile centre, bored 5/16” di- ameter right through, can be used in three ways: with the point extended for close ac- cess around small items, with the point just protruding for making a ring impression and without the tip when long hole boring. Made in UK. 157g. PREMIUM LIVE CONE CENTRE When using small section brittle timber, split- ting may be reduced by using a ring centre. Made in UK. 312g. 75mm faceplate 100mm faceplate 150mm faceplate STEB STYLE CENTRE Multi-spur drive centre with spring loaded centre pin. Ideal for brittle materials where minimum pressure would be advantageous. No. 2 MT. Order no. Price AXM-340166 $72.00 Order no. Description Price CFP-75-114 75mm $12.00 CFP-75-M30 75mm $12.00 CFP-100-114 100mm $15.00 CFP-100-M30 100mm $15.00 CFP-150-114 150mm $32.00 CFP-150-M30 150mm $32.00 Order no. Price AXM-340188 $49.00 Order no. Description Price MCL-222 4-prong Drive Centre, No.2 MT $11.00 MCL-221 4-prong Drive Centre, No.1 MT $11.00 MCL-202 Ball-Bearing Live Centre No.2 MT $16.00 MCL-201 Ball-Bearing Live Centre No.1 MT $16.00 Order no. Price AXM-340185 1MT $89.00 AXM-340186 2MT $89.00 Order no. Price AXM-340203 $55.00 Order no. Description Price HM-3 10mm, No.2 Taper $32.00 HM-4 13mm, No.1 Taper $32.00 HM-5 10mm, No.1 Taper $32.00 HM-6 13mm, No.2 Taper $32.00 Order no. Price AXM-340164 $42.00 Order no. Price AXM-340139 $69.00 Order no. Price DC-0200 $37.00 Order no. Description Price AXM-340109 (9.5mm) $29.00 AXM-340111 (16mm) $29.00 Order no. Description Price AXM-340106 (25mm) $35.00 AXM-340177 (38mm) $49.00
  • 47. Woodturning & Accessories 45Want to see more? See our website for our full range of products. SKILTON SANDER This sander has a handle made from hard plastic making it light, durable and afford- able. Attached to this are foam backed sand- ing pads mounted on ball bearings. These spin freely with just enough ‘give’ to conform to the inside of bowls. Supplied standard with a 75mm head, 50mm head available as an accessory. Heads are velcro backed. Abrasives available. GROZ ENGINEERING QUALITY EXTRA HEAVY DUTY LIVE CENTRE Features replaceable and adjustable nee- dle roller bearings that take up the radial load and heavy duty thrust bearings for axial loads. Centre points are ground to 60°. KEYLESS CHUCK WITH NO. 2 MORSE TAPER 13mm capacity chuck with no. 2 morse taper shank and B-16 connection to chuck. SANDPAPER TO SUIT SK SANDER & SANDING PADS VE-50 & VE-75 WOODCUT® BOWLSAVER Making three bowls from one block of wood is a breeze. Cut perfectly shaped bowls ranging from 75mm to 330mm in diameter, and up to 125mm deep. For added stability, unit also plugs into the MT2 socket in your lathe tailstock. Note: A tool post will be required to use your bowlsaver (not included). MORSE TAPER REDUCER Enables you to use No. 1 Morse Taper chucks, live centres, etc. in lathes fitted with No. 2 Morse Taper spindles. SOFT, FLEXIBLE SANDING PADS For use on power drills. Ideal for sanding inside bowls, etc. HOOK & LOOP RECTANGULAR SHEETS To suit sanding pads above. VERITAS® CENTRE FINDER Made from aluminium a knife edge steel blade is used to score the end of a work- piece. You set a square or cylinder (up to 6” across) in the marker, tap it with a mal- let, turn the wood 90° and tap it again. The result is two score lines that mark the centre of the wood; in softwoods the lines are deep enough to hold the drive centre directly. TRI-GAUGE Maintaining the correct grind angle for your woodturning tools is absolutely essential. This simple gauge will enable you to check that your grind angle is correct, every time. WOODCUT TRU-GRIND Incorporates a number of new features that make it more useful than ever, especially for the difficult task of sharpening turning goug- es and scrapers. Instructional CD supplied together with full instruction booklet. Tool ca- pacity 1-1/2”. STURDYREST® Is an optional toolrest accessory for the Tru- Grind Jig above. Note - Sturdy rest does not include the sliding base unit as this is part of the TruGrind above. WOODTURNER’S JACKET Available in M, L, XL and XXL. Please specify size when ordering. See web- site for all product sizes and codes. Order no. Description Price GZ-11011 No.2MT $65.00 Order no. Price HM-513 $41.00 Order no. Price WDC-BSVRH $419.00 Order no. Price 16002 $20.00 Order no. Description Price SK-75 Sander Complete $50.00 SK-SS50 50mm pad $23.00 SK-SS75 75mm pad $27.00 Order no. Description Price SK-5060 50mm #60grit 25pce $9.00 SK-5080 50mm #80grit 25pce $9.00 SK-50120 50mm #120grit 25pce $9.00 SK-50180 50mm #180grit 25pce $9.00 SK-50240 50mm #240grit 25pce $9.00 SK-50320 50mm #320grit 25pce $9.00 SK-50500 50mm #500grit 25pce $9.00 SK-7560 75mm #60grit 25pce $17.00 SK-7580 75mm #80grit 25pce $17.00 SK-75120 75mm #120grit 25pce $17.00 SK-75180 75mm #180grit 25pce $17.00 SK-75240 75mm #240grit 25pce $17.00 SK-75320 75mm #320grit 25pce $17.00 SK-75500 75mm #500grit 25pce $17.00 Order no. Description Price VE-30 30mm $16.00 VE-50 50mm $22.00 VE-75 75mm $26.00 VE-100 100mm $44.00 Order no. Description Price SSV-80 80 grit $2.00 SSV-120 120 grit $2.00 SSV-180 180 grit $2.00 SSV-240 240 grit $2.00 SSV-320 320 grit $2.00 SSV-400 400 grit $2.00 Order no. Price 05N15-01 $34.00 Order no. Price WDC-TRIG $21.00 Order no. Price WDC-TRUGR $189.00 Order no. Price WDC-PVS-L $65.00 Order no. Price JACKET-L $62.00
  • 48. Woodturning & Accessories 46 For more information & to shop online go to www.carbatec.com.au HAMLET CRAFT TOOLS Traditionally Sheffield is a world renowned centre for the manufac- turing of quality tools and no other company exemplifies this tradi- tion more than A. CLOTH BACKED SANDING KIT An ideal accessory for woodturning spindle work, pen making and other applications where narrow sanding strips are an advantage. This kit con- tains 4 rolls of 25mm x 6 metre with the following grits: 150, 240, 320 and 400. Individual rolls not available, only sold in kit form. 450g. BRASS FERRULES (PAIR) For chisel handles. Guaranteed never to split! Chamfered on the outside at one end for hand comfort and on the inside at the other end for ease of installation. Inside Dia: 22mm, Outside Dia: 25mm, Length: 17mm. “HUT” WOODTURNER’S WAX With Money Back Guarantee. If this is not the best and easiest finish you’ve ever tried, return it at the end of seven days for a full refund of the purchase price. Gives a hard, full bodied finish to your work without lines or blotches. 120g. “HUT” PROFESSIONAL PEN POLISH WAXES For a long wearing semi-gloss finish. NOVA 10 IN 1 CHUCK GAUGE Combines all the most commonly used gauges into ONE efficient device. Only gauge available for NOVA chuck jaw dovetail measurement. Made of heavy duty polycarbonate. CENTRE FIND Find the centre of round or square stock quickly and easily. Saves you time. ECONOMY HSS TURNING CHISEL SETS Made in China these tools compare very favourably with European and Australian manufactured products but at half the price. 3 piece set contains: 10mm spindle gouge, 12mm skew chisel and 2mm part- ing tool. 500g. 6 piece set contains: 10mm spindle gouge, 13mm bowl gouge, 22mm roughing gouge, 18mm round nose scraper, 20mm diamond parting tool, and 25mm oval skew. B. C. D. E. F. G. Order no. Size Handle Length Weight Price A. ROUGHING GOUGES M2-063 1/2” 13” 325g $65.00 M2-064 3/4” 10” 380g $65.00 M2-065 1-1/4” 14” 650g $84.00 M2-066 1-3/4” 16” 890g $140.00 B. STANDARD ROUND SPINDLE GOUGES M2-067 1/4” 10” 200g $37.00 M2-068 3/8” 10” 245g $44.00 M2-069 1/2” 10” 315g $51.00 M2-070 3/4” 10” 285g $65.00 C. BOWL GOUGES M2-082 1/4” 14” 450g $55.00 M2-083 3/8” 14” 510g $65.00 M2-084 1/2” 14” 665g $80.00 M2-086 3/4” 16” 950g $150.00 M2-087 1” 16” 1132g $173.00 D. SHORT BOWL GOUGES M2-088 3/8” 10” 428g $59.00 M2-088A 1/4” 14” 450g $55.00 Order no. Description Price TJ-3 3 Piece Miniature Set, Length 270mm $30.00 TJ-6 6 Piece Set $135.00 Order no. Price SPS95-01 $24.00 Order no. Price F111B $7.00 Order no. Description Price HUT-L Woodturner’s Wax - Light $16.00 HUT-107 Professional Pen Polish Waxes - Brown $9.00 HUT-108 Professional Pen Polish Waxes - White $9.00 Order no. Price CENTRE-FIND $5.00 Order no. Price TK-10051 $15.00 Order no. Description Size Handle Length Weight Price E. HEAVY DUTY SCRAPERS M2-144F (RH) 1-1/2”x3/8” 14” 825g $118.00 M2-144E (LH) 1-1/2”x3/8” 14” 825g $118.00 REGULAR DUTY SCRAPERS M2-112 (Square end) 1/2” 10” 290g $41.00 M2-113 (Square end) 3/4” 10” 335g $50.00 F. M2-114 (Square end) 1” 10” 385g $60.00 M2-116 (Round nose) 1/2” 10” 290g $41.00 M2-117 (Round nose) 3/4” 10” 335g $50.00 G. M2-118 (Round nose) 1” 10” 395g $63.00 M2-119 (Round nose) 1-1/4” 14” 640g $83.00
  • 49. Woodturning & Accessories 47Want to see more? See our website for our full range of products. B. 5 PIECE MINIATURE WOODTURNING SET Set contains: 1/8”and 1/4” spindle gouge, 1/4” skew chisel, 1/4” round nose scraper and 1/16” parting tool. 420g. A. 5 PIECE WOODTURNING TOOL SET Set contains: 3/4” roughing gauge, 1/4” spindle gouge, 1/2” skew, 1/4” parting tool and 1/2” round nose scraper. Ideal for beginners or experienced turners. A. B. C. D. E. F. G. M2-089 M2-090 M2-092 M2-091 M2-094 M2-095 M2-164 Not avail. M2-217 M2-215 M2-134 M2-135 A. B. Order no. Size Handle Length Weight Price A. GERMAN SPINDLE GOUGES M2-072 1/4” 10” 235g $65.00 M2-073 3/8” 10” 235g $65.00 M2-074 1/2” 10” 290g $70.00 M2-075 3/4” 10” 322g $83.00 M2-076 1” 10” 420g $117.00 M2-077 1-1/4” 10” 630g $132.00 B. BEAD FORMING TOOLS M2-127 1/4” 10” 255g $44.00 M2-128 3/8” 10” 280g $44.00 M2-129 1/2” 10” 315g $50.00 C. LONG & STRONG DETAIL GOUGES M2-156 3/8” 14” 430g $77.00 M2-157 1/2” 14” 630g $88.00 D. DETAIL GOUGES M2-153 3/8” 10” 250g $50.00 M2-154 1/2” 10” 335g $57.00 E. CAPTIVE RING TOOLS M2-130 1/4” 10” 270g $51.00 M2-131 3/8” 10” 295g $55.00 M2-132 1/2” 10” 322g $58.00 F. CONTINENTAL SPINDLE GOUGES M2-079 1/2” 10” 230g $65.00 M2-080 3/4” 10” 285g $77.00 G. RING TOOLS M2-125 1/2” 10” 285g $62.00 M2-126 1” 14” 600g $88.00 Order no. Size Handle Length Weight Price HOOK TOOLS M2-163 1/4” 10” 630g $80.00 M2-164 1/2” 10” 660g $80.00 SORENSEN SPINDLE MAKERS M2-215 1/4” 10” 235g $65.00 M2-216 3/4” 10” 310g $71.00 M2-217 1” 10” 400g $86.00 SQUARE SECTION HOLLOWING TOOLS M2-133 1/4” 10” 210g $44.00 M2-134 1/4” 10” 210g $55.00 M2-135 1/4” 10” 210g $55.00 Order no. Description Price A. HCT-166 5 Piece Woodturning Tool Set $240.00 B. HCT-168 5 Piece Miniature Woodturning Set $135.00 Order no. Size Handle Length Weight Price PARTING TOOLS M2-089 (Thin) 1/16” 4” 120g $40.00 M2-090 1/8” 10” 220g $49.00 M2-091 3/16” 10” 305g $49.00 M2-092 (Diamond) 1/4” 10” 285g $63.00 BEADING & PARTING TOOLS M2-094 1/4” 10” 235g $49.00 M2-095 3/8” 10” 310g $52.00 OVAL SKEWS M2-096 1/2” 10” 235g $52.00 M2-097 3/4” 10” 335g $55.00 M2-098 1” 10” 380g $63.00 M2-099 1-1/4” 14” 555g $93.00 STANDARD SKEWS M2-100 1/2” 10” 280g $41.00 M2-101 3/4” 10” 335g $55.00 M2-102 1” 10” 400g $69.00 M2-103 1-1/4” 14” 625g $92.00 ROUND SKEWS M2-108 3/8” 10” 280g $42.00 M2-109 1/2” 10” 375g $49.00 ROLLED EDGE SKEW M2-104 1/2” 10” 275g $45.00 M2-105 3/4” 10” 305g $58.00 M2-106 1” 10” 390g $73.00 M2-107 1-1/4” 10” 650g $98.00
  • 50. Dust Extraction & Accessories 48 For more information & to shop online go to www.carbatec.com.au CARBA-TEC® ROOM AIR FILTER Remote control, 3 speed room filter. 450, 550 & 650 CFM, 1/6hp, 240v. Filters the volume of a 3250 cuft room 12 times per hour. Unit is fitted with a timer so that the filter can run after personnel have left the workshop for the day. Standard filter is electrostatically charged to facilitate greater attraction of dust particles. Filter can be washed or blown out with air. Unit filters almost 100% of parti- cles 5 microns or larger and around 85% of particles up to 1 micron. Normally installed hung from the ceiling but can be placed on a bench. 24kg. CARBA-TEC® ROOM AIR FILTER Remote control, 3 speed room filter. 800, 1200 & 1700 CFM, 1/3hp, 240v. Filters the volume of a 3250 cuft room 30 times per hour. Unit is fitted with a timer so that the filter can run after personnel have left the work- shop for the day. Unit has a three filter sys- tem including an electrostatically charged filter to facilitate greater attraction of dust particles. Unit filters almost 100% of parti- cles 5 microns or larger and around 85% of particles up to 1 micron. (Note: This unit is fitted with a diffuser on the exhaust side for a more even spread of cleaned air.) Normally installed hung from the ceiling but can be placed on a bench. 55kg. 1HP UNDER BENCH ECONOMY DUST EXTRACTOR Specifications Motor 1hp, 240v CFM Rating 500cfm Filter Bag Fitted Cotton Filtration Bag 30 Micron Collection Bag Type Cloth Hose Inlet Diameter 100mm Number of Inlets 1 Workshop Footprint 420x650x1550mm Shipping/Net Weight 22/16kg 1HP ECONOMY DUST EXTRACTOR An excellent value for money machine. Suit- ed for the hobbyist or weekend woodwork- ers’ workshop. Effective for removal of chips and shavings from one machine at a time. Unit fitted to castor base for easy storage in the small workshop. Specifications Motor 1hp, 240v CFM Rating 500cfm Filter Bag Fitted Needle Felt, 5 Micron Collection Bag Type Plastic Hose Inlet Diameter 100mm Drum Diameter 375mm Number of Inlets 1 Workshop Footprint 420x650x1550mm Shipping/Net Weight 30/27kg 2HP ECONOMY DUST EXTRACTOR The ideal choice for the larger garage or shed workshop. The additional power in this machine means that you can have up to 2 machines connected at the same time. Per- fect for planers and jointers as the volume of airflow and bag capacity are greater. Specifications Motor 2hp, 240v CFM Rating 1,200cfm Filter Bag Fitted Needle Felt, 5 Micron Collection Bag Type Plastic Hose Inlet Diameter 100mm Drum Diameter 480mm Number of Inlets 2 Workshop Footprint 560x850x1950mm Shipping/Net Weight 51/47kg PLASTIC COLLECTION BAGS It is necessary to use plastic bottom col- lection bags to replace the cloth bags on the bottom of your dust extractor when fitting pleated filter cartridges. Note - CT- 2042-PCB bags also suit CT-4043 and SDC-4045A dust extractors. Avg. 1.45kg. All come as a 10 pack. Ute/Trailer Pickup Ute/Trailer Pickup Ute/Trailer Pickup Order no. Price FM-230-PCB $14.00 FM-300-PCB $24.00 CT-2042-PCB $25.00 CT-002V-PCB $38.00 CT-003V-PCB $45.00 CT-005V-PCB $49.00 Order no. Desc. Price CTF-1000 Room Air Filter $419.00 CTF-1000-CF Filter to suit $73.00 Order no. Desc. Price CTF-2000 Room Air Filter $799.00 CTF-2000-CF Filter to suit $105.00 Order no. Description Price FM-230 Dust Extractor $209.00 FM-230-FB-5 Filter Bag $34.00 Order no. Price FM-230M $209.00 Order no. Desc. Price FM-300 Extractor $319.00 FM-300-FB-5 Filter Bag $42.00
  • 51. Dust Extraction & Accessories 49Want to see more? See our website for our full range of products. INDUSTRIAL TWIN BAG 2HP DUST COLLECTOR Sealed bearings for quiet, longer lasting operation. Maximum CFM rate is 1,927cfm. 3 x 4” dust ports. Motor and hose connection point can be inverted to al- low hoses to be connected from the top if required. Polyethylene bottom bags included as standard. Specifications Motor 2hp, 240v CFM Rating 1,927cfm Filter Bag Fitted Needlefelt, 5 Micron Collection Bag Type Plastic Hose Inlet Diameter 100mm Drum Diameter 400mm Number of Inlets 3 Workshop Footprint 470x1450x2200mm Shipping/Net Weight 58/56kg INDUSTRIAL TWIN BAG 3HP DUST COLLECTOR Sealed bearings for quiet, longer lasting operation. Maximum CFM rate is 2,170cfm. Motor and hose connection point can be in- verted to allow hoses to be connected from the bottom if required. Polyethylene bottom bags included as standard. 4 x 4” dust ports. Specifications Motor 3hp, 240v/415v CFM Rating 2,170cfm Filter Bag Fitted Needlefelt, 5 Micron Collection Bag Type Plastic Hose Inlet Diameter 100mm Number of Inlets 4 Workshop Footprint 560x1650x2450mm Shipping/Net Weight 85/82kg PLEATED FILTER CARTRIDGES An excellent upgrade to your existing dust extractor. JET DUST COLLECTOR DC-1200 VORTEX Benefits behind the Vortex technology • Minimises filter clogging and subse- quent health concerns from manual cleaning • Eliminates rapid performance drop due to premature filter clogging • Dramatically improves chip separation efficiency of single stage dust collec- tors Specifications Motor 2hp CFM Rating 1200CFM Filter Bag Fitted 80cm Length Filtration Bag 5 Micron Filter Bag Collection Bag Type Plastic (PVC) Hose Inlet Diameter 152m(1 inlet)/102mm(dual) Number of Inlets 1 or 2 Workshop Footprint 686x834x1981mm Shipping/Net Weight 70/65kg Ute/Trailer Pickup Ute/Trailer Pickup CARBA-TEC® TWO STAGE DUST CYCLONES The main advantages of two stage cyclone collectors are that the heavier dust particles and chips fall out of the airflow before reach- ing the impeller. Unlike single stage units where these particles pass through the im- peller and start clogging the filter medium. This unit combines these advantages with mobility, enabling even smaller shop users to tap in to the advantages of a cyclone. The mobile collection drum also allows you to remove waste easily. Note: Extremely small footprint, low overall height, also features an automatic filter cleaning. Specifications Motor 2hp, 240v CFM Rating 1,600cfm Filter Bag Fitted Pleated Canister Filtration Bag 1 micron Collection Bag Type Metal Drum & Plastic Hose Inlet Diameter 200mm with Reducer to 100mm Number of Inlets 2 Workshop Footprint 1130x640x1730mm Shipping/Net Weight 145/119kg Specifications Motor 3hp, 240v CFM Rating 2,200cfm Filter Bag Fitted Pleated Canister Filtration Bag 1 micron Collection Bag Type Metal Drum & Plastic Hose Inlet Diameter 200mm with Reducer to 100mm Number of Inlets 3 Workshop Footprint 1200x880x2150mm Shipping/Net Weight 205/171kg Ute/Trailer Pickup Order no. Description Price FM-230CF To Suit FM-230 $179.00 FM-300CF To Suit FM-300 $199.00 PFC-1000 To Suit CT-2042 & CT-003VB $729.00 Order no. Price CT-002VB-1PH $999.00 Order no. Price CT-003VB-1PH $1,329.00 CT-003VB-3PH $1,329.00 Order no. Description Price JET-DC1200VX 1ph $599.00 JET-DC1200VX-3PH 3ph $599.00 JET-DC1200VX-CF Cart. Filter $299.00 Order no. Price UB-3100ECK $2,695.00 Order no. Price UB-2100ECK $2,195.00
  • 52. Dust Extraction & Accessories 50 For more information & to shop online go to www.carbatec.com.au CARBA-TEC® PERSPEX ADJUSTABLE LATHE DUST EXTRACTION HOOD Mounts directly to the bed of most mini or midi lathes. This unit should be used directly behind the work being turned. BIG GULP LATHE HOOD Mounts using a t-slot style fitting on to the bed of most midi to full size lathes. Articulat- ed arm allows you to swing the hood away or adjust to accommodate larger work. BIG GULP Large 330 x 406mm throat on this hood makes it ideal for collecting dust from problem machines. It’s lightweight, portable and easy to position. Made from ABS plastic with a 4” port to connect to any dust collection system. 8.5kg. FLOOR SWEEP Attaches to 4” hose or can be attached to 4” downpipe/sewerage pipe etc. Base is 22” x 7”, outlet 4”. CARBA-TEC® 2HP TWO STAGE CYCLONE DUST EXTRACTOR Requires a lead with a standard 10A plug. This machine has an approximate airflow of 1,354CFM and a very low noise level of 80 decibels. Steel impeller size: 368mm. Filter cartridge surface area: 8m2. Specifications Motor 2hp, 240v CFM Rating 1354cfm Filter Bag Fitted Pleated Cartridge Cartridge Diameter 400mm Filtration Material 2 micron, Spun Bond Polyester Collection Bag Type 130L Bin & Plastic Number of Inlets 1x175mm dia. Workshop Footprint 1000x1500x2400mm Shipping/Net Weight 232/190kg Specifications Motor 3hp, 240v or 3hp, 415v CFM Rating 1,650cfm Filter Bag Fitted Pleated Cartridge Cartridge Diameter 511mm Filtration Material 2 micron, Spun Bond Polyester Collection Bag Type 130L to 200L Bin & Plastic Number of Inlets 1x200mm dia. Workshop Footprint 1000x1500x2400mm Shipping/Net Weight 246/205kg CARBA-TEC® 3HP TWO STAGE CYCLONE DUST EXTRACTOR Requires a lead with a 15A plug or can be hard wired by a licensed electrician. Also supplied is a bin extension increasing your bin capacity to 200L. Using the bin exten- sion will increase the overall height of the unit to 2.65m. This machine has a very low noise level of 83 decibels. Steel impeller size: 394mm. Filter cartridge surface area: 10m2. DUST CHUTE 10” x 4” plastic. 370g. CARBA-TEC® DUST WAND KIT This ingenious kit hooks onto the end of your dust extraction hose allowing you to walk around your workshop to pick up shavings and dust. Kit includes: adjustable dust wand handle, clear length of tubing, quick connect blast gate, floor sweep intake and an additional dust wand handle that has bristles for cleaning benches, etc. 3kg. Ute/Trailer Pickup CLEAR DUST EXTRACTION KIT This kit includes 8 x 100mm x 1m lengths, 2x 100mm 90° Bends, 2 x 100mm 90° branches, 2 x 100mm 60° bends, 3 x 100mm Blast Gates, 16 x joiners and mounting hardware. Order no. Price LHA-914 $73.00 Order no. Price BGL-1 $95.00 Order no. Description Price BGS-1 Big Gulp With Stand $125.00 DBGULP Big Gulp Dust Chute $22.00 Order no. Price M-015 $11.00 Order no. Price CT-702 $2,595.00 Order no. Price CT-703-1PH $3,095.00 CT-703-3PH $3,095.00 Order no. Price M-134 $16.00 Order no. Price YW-1106 $52.00 Order no. Price YW-2000 $209.00
  • 53. Dust Extraction & Accessories 51Want to see more? See our website for our full range of products. CARBA-TEC® DUST DEPUTY - BY ONEIDA AIR SYSTEMS The dust deputy is an extremely efficient, cyclonic pre-separator for vacuums. Trap dust in the barrel and NOT in your shop vacuum. The Dust Deputy will filter 99% of sanding dust, with only 1% going into the vacuum. Extend the life of your vacuum and filters! Maintain maxi- mum suction, no loss of airflow, and an end to clogged filters. The tapered inlet and outlet accommodates different sized hoses and couplings. Made in USA. ADJUSTABLE DUST ARM Attaches to a table or mounts to a wall or ceiling. Arm extends 44” vertically and 60° horizontally. Plastic hood has 4” x 10” open- ing, accepts 4” hose. SUPER DUST DEPUTY High efficiency cy- clone separates 98% of wood waste before the filter. Filter clog- ging will no longer reduce airflow. DUST EXTRACTION GROUNDING KIT FOR HOME WORKSHOPS Non-metallic duct- work connecting woodworking equip- ment to a dust collector should be internally grounded to minimise the possibility of fires caused by static. 15m of wire. DUST DEPUTY CARBA-TEC® 4” DUST COLLECTION ACCESSORY KIT Includes: 2 x 3m lengths of 4” hose, 4 x blast gates, 10 x stainless steel hose clamps, 1 x Y-junction, 1 x floor sweep, 1 x saw table dust hood, 1 x universal dust hood and 1 x jointer dust hood. 8kg. 2-1/2” HOLD TITE HOSE KIT Includes: 2-1/2” Hose, extends 260 x 1000mm, 2 x couplers, tapered, wide nozzle. 3-WAY DUST COLLECTION JUNCTION Add more tools to your dust collection sys- tem by branching off your main line with this 3-way Dust Collection Junction. All ends have a 4’’ O.D. and a 3-3/4’’ I.D. Works well with blast gates, keeping suction to a maxi- mum. DIY DUST DEPUTY KIT - CYCLONE ONLY You now have even more options of mount- ing the Dust Deputy in your shop, and easier hose connections with the tapered inlet and outlet (2” inner diam- eters). Note: Bucket, hardware and hoses required, but not in- cluded. DUST RIGHT 4” QUICK RELEASE STARTER KIT Dust Right™ 4’’ Quick Release Starter Kit Move dust collection from one tool to the next like never before! One end of the 4’’ Dust Right™ Tool Port connects tightly to any tool with a 4’’ dust port, while the other end fits perfectly into the Dust Right™ Handle. Kit Includes: • Two 4” Dust RightTM Tool Ports with Two Metal Hose Clamps. • Dust RightTM Handle DUST RIGHT 4” TOOL PORTS One end connects tightly to any tool with a 4” dust port, while the other fits perfectly into the Dust Right™ Handle (which connects to 4” hose and, ultimately, your dust collector), allowing you to move dust collection from tool to tool like never before! Includes two ports and two metal hose clamps. Does not include handle as shown. DUST SEPARATOR LID Converts your single stage dust collector into a more efficient two stage system. 2x4” ports fitted as standard. Order no. Price DD-SUPER $559.00 Order no. Price DDAUS $195.00 Order no. Price DD-DIY $75.00 Order no. Price GK-50 $24.00 Order no. Price ADA-1 $95.00 Order no. Price DCK-3 $105.00 Order no. Description Price HTH-970 Hold Tite Hose Kit $16.00 HTH-990 Hose extender kit $12.00 Order no. Price RK-42289 $23.00 Order no. Price RK-42354 $41.00 Order no. Price RK-25516 $21.00 Order no. Price DBS-1 $29.00
  • 54. Dust Extraction & Accessories 52 For more information & to shop online go to www.carbatec.com.au PLASTIC CONNECTORS Primarily used for joining lengths of hose. 5” METAL BLAST GATE ECONOMY PLASTIC BLAST GATES DUST HOSE J-HOOKS These items allow you to get your dust ex- traction hose, ropes and coils of wire up off the workshop floor, minimising trip hazards. INSIDE THREADED RUB- BER DUST FITTING The flexible rubber fittings form a better seal on the hose and allow for quick connection to machinery and other rigid fittings. SHEET METAL BLAST GATE BLAST GATE This blast gate is designed to push directly onto the spigot of most woodworking machines and the opposite side will connect directly into a 4” hose. 210g. Y JUNCTIONS ELBOWS STEPPED REDUCER 2.5” to 2”, 1.5”, 1.25” and 1”. Cut off the unwanted portion with a handsaw. LARGE STEPPED REDUCER 6” to 5”, 4”, 3”, 2.5”, 2” and 1”. Cut off the unwanted portion with a handsaw. REDUCERS TAPERED STYLE REDUCERS OFFSET REDUCER CONNECTORS Allows fitting to fitting con- nection without the need for hose in between. OUTSIDE THREADED DUST FITTINGS Simply screws inside the spiral hose. 4” SUPER FLEXTM DUST EXTRACTOR HOSE Capable of being concertinaed to almost 1/3 of it’s fully extended length. HOSE (SOLD PER METRE) Our strongest hose yet less flexible than our SuperFlexTM hose. HOSE CLAMP Band type with thumb screw adjustment. HOSE CLAMPS Wire or band type may be supplied depending on availability. Order no. Price YW-1084 $19.00 Order no. Description Price M-017 3” $6.00 M-018 4” $9.00 Order no. Description Price M-025 2.5” to 2” reducer/blast gate $8.00 M-005 3” $8.00 M-006 4” $8.00 YW-1008 5” $11.00 YW-1114 Blast Gate Bracket ONLY $8.00 Order no. Description Price JH-2PCE Sold in pairs $8.00 Order no. Description Price HM-1112 2” $9.00 HM-1113 3” $11.00 HM-1114 4” $13.00 Order no. Description Price M-011 4” $28.00 Order no. Description Price YW-1057 4” /90mm $11.00 Order no. Description Price YW-1050 2-1/2” $8.00 M-001 3” $8.00 M-002 4” $10.00 YW-1049 5” $14.00 Order no. Description Price M-004 4” $10.00 Order no. Price M-031 $10.00 Order no. Price YW-1039 $11.00 Order no. Description Price M-036 6” to 5” Metal $40.00 M-037 6” to 4” Metal $38.00 M-035 5” to 4” Plastic $11.00 W-1022 2.5” to 1.5” Plastic $8.00 M-030 4” to 2” Plastic $8.00 M-038 4” to 2.5” Plastic $8.00 M-009 4” to 3” Plastic $8.00 Order no. Description Price YW-1094 4” to 2.25” Plastic $8.00 Order no. Description Price M-039 4” to 2.5” Plastic $8.00 Order no. Description Price YW-1070 4” $8.00 Order no. Description Price M-10145 5” to 5” connector $10.00 M-10143 4” to 3” reducer $10.00 M-10146 4” to 2-1/4” reducer $10.00 M-10136 4” to 4” connector $10.00 M-10141 3” to 3” connector $10.00 Order no. Description Price HOSE42B 4” x 2m long $29.00 HOSE43B 4” x 3m long $40.00 Order no. Description Price HOSE2 2” $13.00 HOSE2.5 2.5” $14.00 HOSE3 3” $15.00 HOSE4 4” $16.00 HOSE5 5” $29.00 HOSE6 6” $35.00 Order no. Description Price YW-110T 4” $7.00 Order no. Description Price M-052 2” $3.00 M-052.5 2.5” $3.00 M-053 3” $3.00 M-054 4” $3.00 M-055 5” $3.00 M-056 6” $3.00
  • 55. Safety & Workshop Accessories 53Want to see more? See our website for our full range of products. PAFTEC CLEANSPACE2® RESPIRATOR Designed and assembled in Australia. Solves many of the inherent problems in dust mask technology. Less than 500g, this unit is the smallest powered respirator in the world. Easily adjusted to fit around your neck. The Cleanspace® 2 has improved air-flow to match your natural breathing rate. Supplied particulate filter EN 12942 TM2/ P3, effective filter efficiency for particulate matter of 0.3um and above. The new design has an improved filter cover for easy replacement and a battery life of at least 6 hours which can be extended, using the optional endurance pack, up to 11 hrs. Three mask sizes to choose from that are sold separately from the power unit. FULL FACESHIELD Perfect for wood- turning, this full, clear polycarbonate face shield is scratch resistant and the visor can be replaced. Ad- justable headband. 275g. RESPIRATOR MASK P2 respirator masks with exhalation valve. Dual head- strap for optimum fit. Pack of 12. UVEX EARMUFFS These top class earmuffs are Class 5 ear protection and are rated at 27 decibels. Fitted with adjustable headband. SAFETY GOGGLES Clear polycarbonate goggles. These safety goggles are scratch resistant and are able to be worn over the top of reading glasses. PROFESSIONAL FACE SHIELD In addition to providing excellent protection, this newly developed face shield is excep- tionally comfortable and easily adjusts for fit and shield angle. Its contoured frame wraps around your face to protect your chin and forehead, much like a goalie mask. Suit- able for prolonged use, it has a cushioned headband with a washable brow pad. The headband adjusts and secures easily using a rear-knob double-ratcheting system. The tough polycarbonate shield has a scratch- resistant anti-static and anti-fog coating. Measures about 9-1/2” wide by 13” tall and weighs 12 oz. Made in the USA. 3M DISPOSABLE HALF FACE RESPIRATOR MASK An excellent choice for work settings in- volving heat, humid- ity and long periods of wear. Classified as an A1B1E1K1P2 respirator. Able to be used for protec- tion from dusts, mists, fumes, smokes, as well as organic vapours, acid gases, sulphur dioxide and ammonia. POWERED DUST MASK Distributed by Carba-Tec® , this affordable powered dust mask removes the majority of minute wood dust and composite particles down to as small as 0.4 microns. The face cup is made from soft silicon for enhanced wearer comfort. Used air is exhaled through the two non-return valves on the side of the mask. Unit takes 4 AA batteries (not includ- ed) or 4 equivalent rechargeable batteries (not included). Continuous run time on one set of batteries approximately 6 to 10 hours. Unit is provided with 3 particulate filter car- tridges and 10 pre-filter pads. Mask weight: 275g, Gross weight: 800g. 3M VERSAFLOTM STARTER KIT Offers protection for the face and respiratory system, with the filter and battery pack worn on a belt. Clean air is delivered via a hose to the head piece, and runs continuously for 10-12 hours, from a rechargeable battery. 2.8kg. TREND XSTREME POWERED AIRSHIELD Lightweight, battery powered is a self-con- tained lightweight Powered Air Purifying Respirator providing all-in-one respiratory protection against dust, fumes and particu- lates, combined with eye and face protection against impact and liquid splash. • Low noise fan motor provides initial rate airflow of 210 litres per minute (lpm) (150lpm minimum at end of battery life). Low battery audible alarm. • Polycarbonate faceshield with nylon elasticated faceseal-tinted and clear overlays are available for the faceshield. • On-off switch easily operated with gloved hand. • Air flow indicator pre-checks battery and filter performance and condition. New & Improved Order no. Description Price 80PC321 Respirator Mask $29.00 UVEX2-27DB Uvex Earmuffs $49.00 40SN160 Safety Goggles $11.00 Order no. Price 40VC105 $39.00 Order no. Description Price 22R72-60 Face Shield $62.00 22R72-61 Repl. Shield. ea. $30.00 Order no. Price 3M-4279 $52.00 Order no. Description Price SA-201 Powered Dust Mask $99.00 SNA-201 Pre-filter Pads-10 pack $6.00 SA-201FLT Repl. Particulate Filter Cartridge $11.00 Order no. Price 3M-902-03-78 $1,069.00 Order no. Price TREND-PRO $559.00 Order no. Description Price PTR-2 Cleanspace2 Unit $489.00 PTR-0029 H Series Mask S/M $88.00 PTR-0026 H Series Mask M/L $88.00
  • 56. Safety & Workshop Accessories 54 For more information & to shop online go to www.carbatec.com.au SURGICAL BRUSHES (6 Pairs) If you have had an operation re- cently, you may have used this nylon brush with a foam pad on the back of it to self-prep the op- erating area. The nylon brush is intended for use directly on skin and is gentle but very effective. What is amazing is the way it can winkle dirt out of your cuticles and from under your fingernails; in non-medical use this solves a constant problem for garden- ers and woodworkers. Although it measures only 50 x 75mm, it has 1440 individual bristles that are subtle but insistent, cleaning your hands far better than any combination of stiff bristles and cloths. Made in USA. CARBA-TEC® FLEXIBLE LED LIGHT An excellent addition to any workshop. This light has a 7 LED light head and can be positioned almost anywhere by means of the flexible arm. The magnetic base will clamp to any steel surface or alternatively the included vise clamp can be used to clamp to any surface with a thickness of 60mm or less. 570g. QUARTZ HALOGEN LOW VOLTAGE 55W LAMP SYSTEM WITH 500MM ARTICULATED ARM. So often it is difficult to arrange machinery within the workshop so that maximum natural light is always available or so that the fluorescent workshop lights really illuminate the machine in question. The CARBA-TEC artic- ulated lamp solves this problem. 2.7kg. Choose 3 optional mount- ing systems below . SLIDING 20X LOUPE 20 times magnification. A light automatically turns on when you slide the loupe open. Batteries included. QUARTZ HALOGEN LOW VOLTAGE 20W LAMP SYS- TEM WITH 700MM WITH FLEXIBLE GOOSENECK So often it is difficult to arrange machinery within the workshop so that maximum natural light is always available or so that the fluorescent workshop lights really illuminate the machine in question. CARBA-TEC® Stay- put lamps solve this problem. 1.92kg. HEADBAND LOUPE WITH INTERCHANGEABLE LENSES For close work on models, stamps, electronics, watch mak- ing or other intricate crafts, etc. a headband loupe is essential. It allows both hands to be used for the purpose at hand. This was the best unit we could find on the market and it is highly rec- ommended. Unit fitted with three powerful LED lamps (requires 3 AAA batteries, not included). In- terchangeable lenses with mag- nification factors of 1, 1.5, 2 & 2.5 included. Can be used with or without your spectacles. The wearing weight is 195g. Ship- ping weight is 560g. 10X MAGNIFIER LOUPE This loupe has great resolution, adjustable focus, and a wide viewing angle. All properties of a professional loupe. The remov- able scale plate can be inter- changed with a non-scaled lens. The LED clip-on light will illumi- nate the surface as necessary. FLUORESCENT MAGNIFYING LAMP WITH ARTICULATED ARM Fitted with magnifying lens (x 3 magnification) and fluorescent lamp. Allows you to do small work more easily and with less eye strain. Clamps to benches up to 43mm thick. JF-DOUBLER is a lens magnifying doubler. LIMBER MAGNETIC LED LIGHT A convenient micro light for di- rect spot lighting. This tool has a flexible shaft 300mm in length and a magnetic base allowing it to be used on a variety of ma- chinery. 85g. HAND HELD 4 X MAGNIFIER Overall length 200mm. Fitted with 6 bright LED’s surrounding the lens. Two switch settings al- lowing one or five LED’s to be illuminated. Requires 2 AAA bat- teries, not supplied. OPTIONAL BASES Three optional mounting sys- tems are available. With the most popular being the permanent magnetic base. This is recom- mended for most applications. 500g. Also available is the angle clamping bracket which can be clamped to table tops, etc. with a maximum thickness of 42mm. 440g. For wall mounting use the right angle bracket. 180g. 7 PLACE LEATHER CHISEL ROLL Suits woodturning tools or other large chisels. Weight: 760g. Order no. Price JW-55NTL $129.00 Order no. Price CT-LED7 $43.00 Order no. Price CT-1021 $6.00 Order no. Price LP-1525 $55.00 Order no. Price 30C04-07 $59.00 Order no. Desc. Price JF-30LEB Lamp $139.00 JF-DOUBLER $33.00 Order no. Price CT-1065 $10.00 Order no. Price CA-203 $9.50 Order no. Price HL-700 $99.00 Order no. Price CT-MLL $16.00 Order no. Description Price J-M01 Magnetic Base $14.00 J-C02 Mounting Clamp $10.00 J-L02 R/Angle Bracket $7.00 Order no. Price AR-7 $31.00
  • 57. Safety & Workshop Accessories 55Want to see more? See our website for our full range of products. CANVAS CHISEL AND GOUGE ROLLS Specially designed for cabinet- makers’ chisels and larger goug- es. The flap folds down over the blades to protect them when the tools are rolled up. All are fully bound, made of heavy-duty can- vas with a sturdy cloth tie. Made in Canada. 16 POCKET PROFESSIONAL TOOL APRON Steel blue colour. Suits waste from 82 to 120cm. Set includes tool belt and leather hammer hangers. 11 POCKET PROFESSIONAL TOOL APRON Steel blue colour. Suits waist from 82 to 120cm. Set includes tool belt and metal hammer hangers. 50MM LEATHER TOOL BELT Made in saddle brown with two tangs. Suits waist from 82 to 120cm. CHISEL ROLLS Chisels not inc. Suits carpenters and carver’s chisels. BENCH DOG BENCH COOKIETM PLUS WORK GRIPPERS BY ROCKLER - 4 PK Turn Bench Cookie™ Plus Work Grippers into shop fixtures. Standard and XL Risers (35142 and 34671 sold separately) screw into Bench Cookie™ Plus discs to elevate them for work with saws and other shop tools that require extra height. Standard Risers achieve a three Bench Cookie™ height and XL Risers achieve both two and three Bench Cookie™ heights. (Each Bench Cookie is 3’’ dia. x 1’’ thick). All Risers fit 3/4” bench dog holes or 3/4” holes drilled into sawhorses or other fixtures for a secure base while you work. RISERS FOR BENCH COOKIES PLUS Standard risers double the height and XL risers allow you to double or triple the height of your Bench CookieTM . BENCH COOKIETM CONES Lift, Grip, Protect, and Finish your project with Bench Cook- ie™ Work Grippers and Bench Cookie™ Cones! AMBIDEXTROUS CARVING GLOVE This glove can be worn on the right or left hand to protect the wearer from sharp knives and chisels, whilst carving and whit- tling. The fabric of the glove is embedded with KEVLARTM . Greatly minimising the risk of penetration of sharp objects. CARBA-TEC® CANVAS APRON Designed with cross-back shoul- der straps to prevent neck strain, our new apron is made from 100% cotton canvas, a washable material that is lightweight yet strong. At 86cm long by 70cm wide, it provides ample side and front coverage. The adjustable shoulder straps secure with low- profile, unobtrusive clips, and the adjustable waistband has a quick-release buckle. The top pocket has three compartments for your convenience. A. LEATHER SHOP APRON A wonderful all-purpose leather apron. Great protection in the workshop. 900g. B. DELUXE LEATHER SHOP APRON Our best apron. Complete with split leg and 1 pocket. Note that pocket is worn on the inside. 1kg. 8 POCKET PROFESSIONAL NAIL BAG Steel blue colour. Set includes tool bag and metal hammer hangers. 10 POCKET PROFESSIONAL NAIL BAG Steel blue colour. Set includes tool bag and metal hammer hangers. A. B. Order no. Desc. Price 67E01-01 6 Pocket $15.00 67E01-02 9 Pocket $19.00 67E01-03 12 Pocket $23.00 Order no. Price AR-200 $86.00 Order no. Price AR-675 $31.00 Order no. Price AR-975 $44.00 Order no. Price AR-175 $72.00 Order no. Price AR-275 $13.00 Order no. Desc. Price AR-9 9 Place $33.00 AR-12 12 Place $37.00 AR-13 13 Place $44.00 Order no. Desc. Price ACGS Small $22.00 ACGM Medium $22.00 ACGL Large $22.00 Order no. Price RK-40607 $8.00 Order no. Desc. Price RK-35142 Risers 2pk $7.00 RK-34671 XL Risers 4pk $12.00 Order no. Price RK-38052 $16.00 Order no. Price 67K10-06 $51.00 Order no. Price A. AR-1783 $48.00 B. AR-2943 $58.00
  • 58. Safety & Workshop Accessories 56 For more information & to shop online go to www.carbatec.com.au A. CASUAL BRACES 2” x 48” long, Fully elasticised. Black heavy duty clips and genuine black leather cross patch. B. CONSTRUCTION BRACES 2” x 48” long, non-elastic fronts double elas- ticised backs with black heavy duty clips and genuine black leather cross patch. C. PADDED CONSTRUCTION BRACES 2” x 48” long, non-elastic fronts double elas- ticised backs with black heavy duty clips and genuine black leather cross patch, also with adjustable shoulder pads. CASUAL BELTS 1-1/4” x 48” long, polyester with black mili- tary style buckle. CONSTRUCTION BELTS 2” x 48” long, construction belt with side re- lease buckle. Painter Electrician Aussie Red Tape Red Black Garden Plumber Builder Fishing Yellow Tape Green Blue Yellow Belts & Braces SHELVING UNIT 1830mm high, 1015mm wide, 405mm deep with 5 moveable shelves. Maximum load per shelf is 150kg when evenly spread over the entire shelf. INDUSTRIAL STEEL SHELVING 1830mm high, 1955mm wide, 610mm deep. Maximum load on individual shelf is 360kg when evenly spread over entire shelf. STACKABLE UTILITY BOX Inside dimensions 330x240x95mm with removable and rearrangeable compartments. STACKABLE UTILITY BOX Outside dimensions 420x330x60mm with 20 removable bins. Lid inter- locks with bins. STACKABLE UTILITY BOX Inside dimensions 440x320x95mm with removable and rearrangea- ble compartments. ROUTER MAT Stops those tricky jobs from running away from you. Sand, carve, plane or rout on this slip resistant mat. Measures 610 x 910mm. Order no. Design Price MAX-BL-TMYE Yellow Tape $12.00 MAX-BL-TMRE Red Tape $12.00 MAX-BL-ELEC Electrician $12.00 MAX-BL-PAIN Painter $12.00 MAX-BL-BUIL Builder $12.00 MAX-BL-PLUM Plumber $12.00 MAX-BL-GRAS Garden $12.00 MAX-BL-FISH Fishing $12.00 MAX-BL-AUST Aussie Flag $12.00 MAX-BL-BLUE Blue $12.00 MAX-BL-BLAC Black $12.00 MAX-BL-RED Red $12.00 MAX-BL-YELL Yellow $12.00 MAX-BL-GREE Green $12.00 Order no. Design Price MAX-CBL-ELEC Electrician $12.00 MAX-CBL-PAIN Painter $12.00 MAX-CBL-BUIL Builder $12.00 MAX-CBL-PLUM Plumber $12.00 MAX-CBL-BLUE Blue $12.00 MAX-CBL-BLAC Black $12.00 MAX-CBL-RED Red $12.00 MAX-CBL-YELL Yellow $12.00 MAX-CBL-GREE Green $12.00 Order no. Design Price MAX-CBL-PAD Padded $19.00 Order no. Design Price MAX-BEL-ELEC Electrician $12.00 MAX-BEL-PAIN Painter $12.00 MAX-BEL-PLUM Plumber $12.00 MAX-BEL-BUIL Builder $12.00 Order no. Design Price MAX-CBEL-TMYE Electrician $12.00 MAX-CBEL-TMRE Painter $12.00 Order no. Price GR-4XHD $309.00 Order no. Price GR-5MD $79.00 Order no. Price CT-3086B $27.00 Order no. Price CT-3086C $17.00 Order no. Price CT-3086A $13.00 Order no. Price P-2436 $11.00
  • 59. 57Want to see more? See our website for our full range of products. Metalworking & Accessories CARBA-TEC® SIEG MICRO MILLING MACHINE X0 • Ideal for the model maker or electronics enthusiast. • Accuracy and compact design allow drilling of holes up to 6mm diameter. • The cast iron base provides stability, heft and dampens vibration. • Digital read-out of the quill travel with zeroing facility and choice of metric or imperial units. • Coarse or fine downfeed Note: Table shown supplied separately. CARBA-TEC® SIEG SMALL MILLING MACHINE X2 • Cast iron construction with finely ground table, hardened slide ways and a variable speed spindle drive. • The head and column tilt to 45° left or right which is a plus for complex jobs. • The headstock quill has a fine downfeed feature for milling and a rack and pinion downfeed system for drilling. • An excellent choice for the model engineer. CARBA-TEC® SIEG MINI MILLING MACHINE X1 • Constructed from cast iron • Perfect introduction mill to metal working. • The head tilts 45° left and right allowing for complex jobs. • The cross slide table is fitted with t-slots so that clamps or a vise can be used to secure work. CARBA-TEC® SIEG SMALL MILLING MACHINE X3 • Well constructed vertical mill drill with excellent specifications. • Compact size makes it the perfect size for just about any workshop. • Electronically variable spindle speed with a choice of two speed ranges, • Rectangular column with adjustable dovetail guides for the head • Vertical feed control wheel operates smoothly with scales graduated in steps of 0.02mm. Quick Vise SN-10035 Milling Table SN-10138 Most popular accessories to suit: Mill Collet Set SN-10139 12 Piece HSS End Mill Set EMS-12PCE Swivel Vise SN-10109 Slotting Arbor SN-10129 Collet Set SN-10078 Angle Vise SN-10133 HSS Mill Cutter Set - SN-10069 Rotary Table CT-110240 Clamping Kit SN-10105 Collet Set SN-10037 End Mill Set SN-10046 Clamping Kit SN-10047 Rotary Table SN-10094 Quick Vise SN-10036 Collet Set SN-10037 HSS Mill Cutters SN-10045 Most popular accessories to suit: Most popular accessories to suit:Most popular accessories to suit: Micro Drill Set MDS-10PCE 12 Piece Clamping Kit SN-10104 Specifications MILL-X0 MILL-X1 MILL-X2 MILL-X3 End Mill Capacity 6mm 10mm 16mm 16mm Face Mill Capacity 6mm 16mm 30mm 50mm Spindle Stroke 40mm 30mm 180mm 80mm Throat 165mm 140mm 165mm 230mm Max. Dist. Spindle to Table 190mm 230mm 280mm 380mm Spindle Taper - MT2 MT3 or R8 MT3 or R8 Spindle Speeds Approx. (RPM) High range: 100-5000 Low range: 100-3600 High range: 100-2000 Low range: 100-1000 High range: 100-2500 ±10% Low range: 100-1100 ±10% High range: 100-2000 Low range: 100-1000 Forward/Reverse - Yes Yes Yes Column Tilt - ±45° ±45° - Table Size - 240x145mm 390x92mm 550x160mm Table Cross Travel - 180mm 100mm 145mm Longitudinal Travel - 180mm 220mm 400mm Motor 1/5hp 1/5hp 1/2hp 3/4hp Overall Height 415mm 720mm 760mm 930mm Shipping/Net weight 17/14kg 56/40kg 68/50kg 198/165kg Price $419.00 $739.00 $869.00 $1,849.00
  • 60. 58 For more information & to shop online go to www.carbatec.com.au Metalworking & Accessories CARBA-TEC® SIEG LATHE C4 Standard accessories include: splash back, integral digital display, 100mm 3-jaw chuck, reverse jaws for chuck, MT2 dead centre, MT3 dead centre, gear change set, wrench set and oil bottle. CARBA-TEC® SIEG MINI LATHE C3 Standard accessories include: drip tray (not shown), splash back, 80mm 3-jaw chuck, MT2 dead centre, gear change set, wrench set and oil bottle. CARBA-TEC® SIEG LATHE C6 Standard accessories include: splash back, 125mm 3-jaw self centring chuck, MT2 dead centre, MT3 dead centre, gear change set, wrench set and oil bottle. An optional stand with drip tray is available for this machine as an optional extra. Most popular accessories to suit C1: Most popular accessories to suit C3/C4/C6: Most popular accessories to suit CO: Parting Tool CT-392450 13mm Tailstock Drill Chuck SN-10027 8mm Drill Chuck SN-10159 Slide Table SN-10154 Live Centre SN-10156 Parting Tool CT-392450 Boring Bar CT-393500 Drill Chuck SN-10091 Sliding Table SN-10083 Mill Attachment SN-10082 CARBA-TEC® SIEG MINIATURE LATHE - C0 A quality miniature metalworking lathe, with a cast iron, hardened and ground bed. Fitted with a 3 jaw self centring 50mm dia. chuck with reversible jaws, single tool post taking 8mm cutting tools, splash guard and interlocked chuck guard for safety. The spindle thread is 14 x 1.0mm. An optional compound slide is available. Standard accessories in- clude 50mm tommy bar style 3-jaw chuck, wrench set and oil bottle. CARBA-TEC® SIEG MICRO LATHE - C1 Featuring a cast iron bed this lathe is the perfect spot to begin! The construction is predominantly from cast iron and steel. Manual or powered leadscrew feed which can be used for thread cutting and an extensive range of optional accessories is available. Maximum cutting tool shank size is 8mm. An optional compound slide is available. Standard accessories include 80mm 3-jaw chuck, MT1 dead centre, wrench set and oil bottle. Live Centre GZ-11011 Handwheel Kit SN-10001 5pce Cutting Set SN-10004 4 jaw Self Centering Chuck SN-10181 5pce Cutting Set SN-10004 Specifications LATHE-C0 LATHE-C1 LATHE-C3 LATHE-C4 LATHE-C6 Swing over bed 110mm 140mm 180mm 210mm 250mm Distance between centres 125mm 250mm 350mm 410mm 500mm Compound/Cross Slide Travel /50mm - 70mm/76mm 70mm/100mm 75mm/110mm Spindle Bore 10mm 10mm 20mm 20mm 20mm Spindle High/Low Range Speeds Approx. 100-3800rpm 100-2000rpm 100-3000rpm/100-1200rpm 150-2000rpm 125-2000rpm Spindle Taper - MT2 MT3 MT3 MT3 Tailstock Taper - MT1 MT2 MT2 MT2 Thread Cutting Pitch - Metric: 0.5-1.25, 5 steps Imperial: 16-24 TPI, 5 steps Metric: 0.4-2.0mm, 5 steps Imperial: 12-52 TPI, 5 steps Metric: 0.25-3.0mm Imperial: 5-24 TPI Metric: 0.4-3.0mm, 12 steps Imperial: 10-44 TPI, 8 steps Dimensions 440x270x210mm 620x300x220mm 880x290x290mm 1000x550x400mm 1200x660x600mm Motor 1/5hp 1/5hp 1/2hp 1-1/3hp 3/4hp Shipping/Net weight 25/23kg 32/23kg 56/44kg 125/94kg 180/145kg Price $539.00 $769.00 $1,095.00 $1,895.00 $1,449.00
  • 61. 59Want to see more? See our website for our full range of products. Metalworking & Accessories 200MM MINIATURE BENDING & CUTTING SHEAR Just because its small don’t shy away. This unit is capable of working with mild steel up to 22 gauge in thickness. You can bend and shear mild steel, brass, copper, etc. with ease. 12.7kg. 3 IN 1 PRESS BRAKE (BENDER) GUILLOTINE AND ROLLER For light duty sheet metal working this ma- chine is a dream with a bending shearing and rolling capacity of 300mmx1mm. The 3 rollers can be accessed by lifting the top cover. The smallest rolled diameter achiev- able is 38mm. FIVE PIECE SET OF 2ND CUT 8” FILES A set of finer files, for smoother cuts. Five shapes - Flat, Square, Round, Triangle & Half Round/Flat. 865g. Made in Italy. FIVE PIECE 8” BASTARD FILE SET A set of coarse files, for faster cuts. Five shapes - Flat, Square, Round, Tri- angle & Half Round/ Flat. 865g. Made in Italy. VERITASTM METAL BENDER Made of high-strength malleable cast iron, capable of bending up to 1/8” mild steel. The main purpose of the metal bender is to make bends up to 90° for such things as angle brackets and sheet-metal parts. CORRADI NEEDLE FILE 12 PIECE SET A precision engineering quality 12 piece set of essential needle files. 160mm overall length, 80mm cut. 150g. Made in Italy. MINI TUBE, SHEET BENDER & ROLLER Invaluable to hobby engi- neers or any one else who needs to bend or roll tube and small sheet materials. Material width capacity 75mm. IRIDIUM 8” FILE CLEANING BRUSH This brush has fine metal ‘teeth’ that are essential to cleaning between the grooves of filing tools. 80g. CORRADI NEEDLE FILE HANDLE This solid hardwood handle makes for comfortable use of your Corradi needle files. Simply twist to release or lock any needle files with 1/8” round han- dles. 95mm long. 20g. Made in Italy. CARBA-TEC® SC3 METALWORKING LATHE Machine brass, aluminium, gun metal, cast iron, industrial nylon, plastics, silver, gold, platinum, nick- el-silver and even wood. This variation on our popular C3 model now has a brushless DC motor that decreases noise and improves the efficient delivery of power to the spindle. An excellent choice for the model engineer. CARBA-TEC® SMALL MILLING MACHINE SX2 Cast iron construction, a finely milled table, hardened slideways and a variable speed brushless DC spindle drive. An excellent choice for the model engineer. Specifications Swing over bed 180mm Distance between centres 350mm Compound/Cross Slide Travel 55/65mm Spindle Bore 20mm Spindle High/Low Range Speeds Ap- prox. 100-2500 ±10% rpm Spindle Taper MT3 Tailstock Taper MT2 Thread Cutting Pitch 12-52 TPI (18 thread pitches) Dimensions 800x290x290 mm Motor 500W Shipping/Net weight 50/55 kg Specifications End Mill Capacity 20mm Face Mill Capacity 35mm Spindle Stroke Throat 167mm Max. Dist. Spindle to Table 280 Spindle Taper MT3 or R8 Spindle Speeds Ap- prox. (RPM) 100-2500±10%rpm Forward/Reverse - Column Tilt - Table Size 400x145mm Table Cross Travel Longitudinal Travel 280mm Motor - Overall Dimension 520x580x760mm Shipping/Net weight 58/75kg Order no. Price CRD-2150005 $94.00 Order no. Price CRD-2150006 $94.00 Order no. Price CRD-125001 $178.00 Order no. Price CRD-1690000 $15.00 Order no. Price CRD-130001 $11.00 Order no. Price CT-SBR-300 $419.00 Order no. Price SN-20002 $315.00 Order no. Price 50K08-01 $32.00 Order no. Price SN-20013 $105.00 Order no. Price MILL-SX2 $1,095.00 Order no. Price LATHE-SC3 $1,095.00
  • 62. 60 For more information & to shop online go to www.carbatec.com.au Metalworking & Accessories 5 PIECE CUTTING TOOL SET Tungsten carbide tipped. In- cludes L & R facing tool, v-tool, general purpose facing tool & parting tool and parting tool. 8mm shanks. 200g. 11 PCE CUTTING TOOL SET Tungsten carbide tipped. In- cludes L & R facing tool, v-tool, two boring bars, general purpose facing tool & parting tool. 8mm shanks. 450g. 6 PCE CUTTING TOOL SET Tungsten carbide tipped. General purpose set. 8mm shanks. 280g. INDEXABLE 4 PCE CUTTING TOOL SET Replaceable tungsten carbide tips. 3 x 10mm square shanks and 1 x 10mm dia. boring bar. 570g. INDEXABLE 7 PCE CUTTING TOOL SET Replaceable tungsten carbide tips. 12mm square shanks, 10mm dia. boring bar. 8 PCE CUTTING TOOL SET 10mm square shanks. HSS with 5% Cobalt. 670g. CUTTING TOOL BLANKS IN M35 HSS WITH 5% COBALT. All blanks are square and 3” long. 6 PCE CUTTING TOOL SET Tungsten carbide tipped. 10mm shanks. Paint job is a bit rough. They are however, high quality tools. 630g. 6 PCE CUTTING TOOL SET Tungsten carbide tipped. 10mm shanks. Paint job is a bit rough. They are however, high quality tools. 690g. BORING AND THREAD CUTTING TOOLS SET 6mm round HSS cutters, 130mm long. 3/8” square holder to suit. CARBON STEEL CUT THREAD ME TAP & DIE SET 19 PIECE Made of high quality Carbon steel and heat treated. Contains 1/8” x 40, 5/32” x 40, 3/16” x 40, 7/32” x 40 tap set of 3pc each size round die 1/8” x 40, 5/32” x 40, 3/16” x 40, 7/32” x 40, Die stock handle 2nos, Straight tap wrench 1nos. BA TAP & DIE SET 38 PIECE Made of high quality carbon steel and heat treated. Plug II size 0BA, 1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 8BA, 9BA, 10BA. Bottom III size 0BA, 1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 8BA, 9BA, 10BA. Round Die 13/16 0BA, 1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 8BA, 9BA, 10BA. Die Handle 13/16. Mini Straight Tap Wrench BA thread gauge. Spindle tap wrench 1/16-1/4, Tap Guide 3/16. 32 PIECE MICRO HSS TAP & DIE SET Ideal for jewellers, modellers and hobby engineers. Set Includes: 9 tapered taps, 9 intermediate taps and 9 matching dies in the follow- ing sizes, 1mm, 1.1mm, 1.2mm, 1.4mm, 1.5mm, 1.6mm, 2mm, 2.2mm, 2.5mm. TAPERED REAMER For enlarging holes and removing burrs, etc. Tapers from 3 to 13mm. Overall length: 123mm. 100g. REPLACEMENT CUTTING TIPS REPLACEMENT CUTTING TIPS 60MM DIAL INDICATOR Dial diameter 60mm, graduated in 0.01mm with a range of 0-10mm. Fitted with rotating bezel with two moveable guides. Supplied in plastic storage case. 200g including the case. A. MINIATURE MAGNETIC BASE Features two machined magnet- ic faces. Height fully extended: 195mm, has universal ball and socket joints for positioning. Ac- cepts standard 8mm shank dial indicators, also accepts gauges with 6mm dovetail mounting. 400g. B. LEVEL TYPE DIAL INDICATOR Dial diameter: 32mm. 7 jew- els Graduated in 0.01mm with maximum deflection 1mm up or down. Changeable 6 and 8mm stem mounting fits most mag- netic bases. 125g. A. B. SHEET METAL BENDING PLIERS The 3-1/8” x 1-1/4” cast iron jaws grip well and are invalu- able in forming a variety of basic shapes as well as hemming them. Order no. Suits Price SN-10004 All lathes $34.00 Order no. Suits Price SN-10005 All lathes $65.00 Order no. Suits Price SN-10006 All lathes $38.00 Order no. Size/Suits Price CT-777200 8mm/C0/ C1/C3 $143.00 CT-777201 10mm/C4/ C6 $143.00 Order no. Size/Suits Price CT-777102 8mm/All lathes $240.00 CT-777103 10mm/C4/ C6 $250.00 Order no. Suits Price CT-130032 C4/C6 $130.00 Order no. Size Price CT-313910 1/8”, 6g $8.00 CT-313945 1/4”, 25g $8.00 CT-313960 5/16”, 40g $9.00 CT-313975 3/8”, 55g $11.00 Order no. Suits Price CT-131370 C4/C6 $48.00 Order no. Suits Price CT-131320 C4/C6 $48.00 Order no. Size/Suits Price CT-132710 6mm/All lathes $95.00 CT-132720 8mm/C1/ C3/C4/C6 $97.00 Order no. Price CT-140720 $77.00 Order no. Price CT-140710 $120.00 Order no. Price MTD-32PCE $65.00Order no. Price TR-127 $9.00 Order no. Price CT-777201-TIPS $14.00 Order no. Price CT-777104-TIPS $14.00 Order no. Price CG-60 $39.00 Order no. Price A. YW-195 $44.00 B. CG-32 $44.00 Order no. Price 09A03-60 $24.00
  • 63. 61Want to see more? See our website for our full range of products. Metalworking & Accessories DEBURRING TOOL Comes complete with 5 different cutting blades that are stored in the handle. 80g. BORING BAR 1/2” square holder with 110mm bar length. Holds 1/8” square cutters. 120g. PARTING TOOL 10mm shank. 120g. QUICK CHANGE TOOL POST Includes 4 tools rests. COMPOUND SLIDE TABLE COMPOUND SLIDE TABLE STEADY REST FOLLOW REST CARRIAGE STOP DRIVE DOG 10mm bore. 50g. FACEPLATES with t-slots 4 JAW INDEPENDENT CHUCK 4 JAW INDEPENDENT CHUCK WITH FLANGE (not shown) 4 JAW SELF CENTRING (not shown) WOODTURNING TOOL KIT MILL ATTACHMENT HAND FEED KNURLING TOOL KNURLING TOOL 300g KNURLING TOOL 450g MORSE TAPER REDUCER Enables you to use No. 1 Morse Taper chucks, live centres, etc. in lathes fitted with No. 2 Morse Taper spindles. 100g. GROZ ENGINEERING QUALITY EXTRA HEAVY DUTY LIVE CENTRES Replaceable and adjustable nee- dle roller bearings take up the radial load and heavy duty thrust bearings for axial loads. Centre points are 60°. DEAD CENTRE WITH MT3 DEAD CENTRE WITH MT2 QUALITY ENGINEERING DRILL CHUCKS LIVE CENTRE (not shown) LIVE CENTRE WITH MT1 LIVE CENTRE WITH MT2 Order no. Price CT-000 $38.00 Order no. Suits Price CT-393500 All lathes $15.00 Order no. Suits Price CT-392450 C1/C3/C4/C6 $18.00 SN-10145 C0/C1/C3/C6 $29.00 Order no. Suits Price SN-10144 C1, 1.1kg $115.00 Below include 3 tool holders SN-10011 C3, 1.2kg $95.00 SN-10026 C6, 2.9kg $122.00 SN-10168 C4, $121.00 Order no. Suits Price SN-10154 C0, 375g $65.00 Order no. Suits Price SN-10083 C1, 1.7kg $175.00 Order no. Suits Price SN-10080 C1, 890g $57.00 SN-10008 C3, 1.3kg $57.00 SN-10160 C4, $57.00 SN-10019 C6, 2.9kg $84.00 Order no. Suits Price SN-10081 C1, 605g $38.00 SN-10009 C3, 685g $48.00 SN-10161 C4, $44.00 SN-10020 C6, 1.5kg $65.00 Order no. Suits Price SN-10015 All lathes $10.00 Order no. Size/Suits Price SN-10079 112mm dia./C1 $44.00 Below do not have T-slots SN-10007 160mm dia./C3 $48.00 SN-10023 220mm dia./C6 $53.00 SN-10162 C4 $40.00 Order no. Size/Suits Price SN-10010 80mm dia./C1 $130.00 Order no. Size/Suits Price SN-10029A 100mm dia./C3 $143.00 SN-10025A 125mm dia./C6 $165.00 Order no. Size/Suits Price SN-10010B 80mm dia./C1/C3 $120.00 Order no. Suits Price SN-10157 C0, 320g $49.00 SN-10086 C1, 690g $57.00 SN-10064 C3 $65.00 SN-10063 C4/C6, 2kg $65.00 Order no. Suits Price SN-10060 C6, 5.9kg $240.00 SN-10061 C3, 5.4kg $240.00 SN-10082 C1, 4.9kg $154.00 Order no. Suits Price SN-10130 C1/C3/C4/C6, 660g $57.00 Order no. Suits Price CT-391110 C1/C3/C4/C6 $27.00 Order no. Suits Price CT-391000 C6 $65.00 Order no. Price 16002 $20.00 Order no. Description Price GZ-11010 No.1mt $65.00 GZ-11011 No.2mt $65.00 Order no. Weight Price SN-10013 320g $14.00 Order no. Price SN-10088 $17.00 Order no. Description Price SN-10091 1-10mm,with MT1 $38.00 SN-10012 1-13mm,with MT2 $58.00 Order no. Suits Price SN-10156 C0, 75g $28.00 Order no. Suits Price SN-10093 C1, 115g $29.00 Order no. Suits Price SN-10024 C3/C4/C6, 550g $54.00 Order no. Suits Price SN-10182 C3 $17.00
  • 64. Metalworking & Accessories 62 For more information & to shop online go to www.carbatec.com.au INDEXABLE TWO FLUTE MILLING CUTTER (MT3) INDEXABLE SINGLE FLUTE MILLING CUTTER (MT2) COLLET SET Includes: 3, 4, 5, 6, 8 and 10mm in MT2. 450g. COLLET SET (not shown) Includes: 4, 6, 8, 10, 12, 14 and 16mm in MT3. 1.27kg. LATHE COLLET SETS Includes seven collets: 4, 6, 8, 10, 12, 14 and 16mm. MILL COLLET & CHUCK SET Includes: 3, 4, 5, 6, 8 and 10mm in MT2. 1.3kg. MILL COLLET & CHUCK SET (Not shown) Includes: 4, 6, 8, 10, 12, 14 and 16mm in MT3. 1.5kg. MILL COLLET SET(not shown) SLOTTING ARBOR MT2 SLOTTING ARBOR MT3 12 PIECE CLAMPING KIT 24 PIECE CLAMPING KIT (Not shown) 42 PIECE CLAMPING KIT (Not shown) DRILL CHUCK 1 to 8mm chuck. Rear of chuck has internal thread to suit 14 x 1 threaded tailstock. 10 PCE CENTRE DRILL SET Includes sizes: 1.2mm, 1.6mm, 2.4mm, 3.2mm, 4.76mm and 6.35mm KEYLESS CHUCK WITH NO. 2 MORSE TAPER 13mm capacity chuck with no. 2 morse taper shank and B-16 connection to chuck. 800g. THREAD CUTTING GEARS Imperial set of 9 gears. A. 100MM DELUXE ROTARY TABLE Includes hold-down kit. 4kg. A. B. B. DIVIDING PLATE ATTACHMENT 50MM QUICK VISE 10MM QUICK VISE SWIVEL VISE WITH QUICK ACTION JAWS - 55mm jaw width. 3kg. 80mm jaw width. 6.1kg. ENGINEERS VISE - 130mm jaw width. 16kg. 100MM ROTARY TABLE Includes hold-down kit. 4kg. HSS END MILL SETS Cutter set includes: 3, 4, 5, 6, 8 & 10mm cutters in 2 flute HSS. 115g. Cutter set includes: 4, 6, 8, 10, 12, 14 & 16mm cutters in 2 flute HSS. 115g. HSS END MILL SETS Set includes: four flute cutters in 4, 5, 6, 8, 10 & 12mm and two flute cutters in 4, 5, 6, 8, 10 & 12mm. 530g. LIVE CENTRE SET WITH MT1 LIVE CENTRE SET WITH MT2 (Not shown) REPLACEMENT CUTTING TIPS REPLACEMENT CUTTING TIPS Order no. Suits Price SN-10046 X2/X3, $105.00 Order no. Suits Price SN-10071 X1 $65.00 Order no. Suits Price SN-10078 X1 $120.00 Order no. Suits Price SN-10126 X2/X3 $154.00 Order no. Suits Price SN-10148 C3 $240.00 SN-10167 C4 $240.00 SN-10149 C6 $240.00 Order no. Suits Price SN-10070 X1 $198.00 Order no. Suits Price SN-10037 X2/X3 $209.00 Order no. Suits Price SN-10139 X0 $219.00 Order no. Suits Price SN-10104 X1 $58.00 Order no. Suits Price SN-10105 X1 $77.00 Order no. Suits Price SN-10047 X2/X3 $122.00 Order no. Description Price SN-10069 X1 $38.00 Order no. Description Price SN-10045 X3 $65.00 Order no. Price EMS-12PCE $59.00 Order no. Price CT-201600 $143.00 Order no. Price CT-201610 $154.00 Order no. Suits Price SN-10046-CUTTER $13.00 Order no. Suits Price SN-10071-CUTTER $13.00 Order no. Suits Price SN-10118 X1 $55.00 Order no. Suits Price SN-10129 X2/X3 $55.00 Order no. Suits Price SN-10159 C0 $37.00 Order no. Price CT-133000 $63.00 Order no. Price HM-513 $41.00 Order no. Suits Price SN-10085 C1 $29.00 Order no. Price SN-10094 $365.00 Order no. Price SN-10094-1 $99.00 Order no. Suits Price SN-10035 X1 $77.00 Order no. Suits Price SN-10036 X2/X3 $99.00 Order no. Suits Price SN-10108 X1 $143.00 Order no. Suits Price SN-10109 X2/X3 $143.00 Order no. Price CT-110240 $176.00 Order no. Price CT-110203 $117.00
  • 65. Marking & Measuring 63Want to see more? See our website for our full range of products. SCRIBE & AUTO CENTRE PUNCH Fitted with tungsten carbide scribe tip and hardened steel punch tip. 135g. CARBA-TEC® EBONY CUTTING GAUGE 1 knife, for mark- ing and cutting lines, strips of wood or veneer and small rebate with or across grain, brass inlaid face. 310g. CARPENTER PENCILS AND SHARPENER SET This set of six carpenters pencils is perfect for cabinet makers and general woodwork- ers alike. The specially designed sharpener, shapes the rectangular pencils to a fine point. Much safer than using a utility knife as many do today! Great value set. 110g DOUBLE BEVEL MARK KNIFE Polished hardened steel, flat one side for accurate marking. Overall length: 165mm. Weight: 115g. THREE IN ONE MARKING GAUGE A wheel gauge, a pin gauge, and a cut- ting gauge. The unique swivelling pin/blade chuck takes either a pin or a blade that locks in place (after extension is set) using a set screw in the end of the 4-1/2” gauge stem. The opposite end of the stem is tapped to accept a 3/8” diameter wheel cutter. A doz- en spare blades, two hardened steel pins, a wheel cutter and a hex key are included. Made in Canada. 90g. VERITAS® BAR GAUGE HEADS Simple bar gauges are among the most use- ful tools in the shop. They have two primary purposes, comparing measurements and transferring measurements. Bar gauges not only shine in basic measurement transfer, but are unequalled for inside measurements, such as for sizing shelves or interior trim for windows. Simply rip 1/4” slices off standard 3/4” timber to make bars of the length you want. 10g. CARBA-TEC® WOODWORKER’S PENCIL Supplied with 5.7mm pencil lead. Overall length of pencil is 130mm. Pencil is fitted with in-built sharpener. This is a com- plete pencil, not a kit. Perfect for marking boards or general workshop use. 45g. JAPANESE MARKING KNIVES These knives are irreplaceable for use in ac- curate marking out of joinery or scoring the surface prior to machining to prevent break- ing out and chipping. Handcrafted, these tools are a welcome addition to any work- shop and a true pleasure to use. A. B. VERITAS® BEAM COMPASS HEADS The head clamps to any material between 16mm and 19mm thick, of any width or length. The heads are held solidly on the beam because each clamping knob also op- erates a trapped pin that prevents pivoting of the head when it is clamped in position. The pins withdraw as the clamping knob is backed off. Since one of the points has an eccentric tip, you only need to clamp the heads approximately; loosen the eccentric tip and you get up to 1/8” of fine adjustment by rotating the point. Comes with two hard- ened steel points, a pencil, plus the heads. TRAMMEL POINTS One point can be interchanged with a pen- cil. Add your own wooden beam to suit any diameter. Pencil not included. 120g. CARBA-TEC® MARKING GAUGE Metric and impe- rial scales to 6” and 150mm. Supplied with l e a d pencil points and steel scribing point. 130g. CARBA-TEC® EBONY MORTISE GAUGE 3 pin, 2 top/1 bottom, mi- cro adjustable slide, brass inlaid face. 320g. VERITAS® MICRO ADJUSTABLE MARKING GAUGE Our standard wheel mark- ing gauge is a great workhorse and excellent value. Its popularity led to the development of a second model that incorporates a micro- adjust feature. It is similar to our standard wheel marking gauge with an anodized alu- minium body, brass face, stainless-steel rod and internal O-ring to keep a constant light friction force on the rod. It differs in that the body is slightly longer and is fitted with a two- stage collet that allows micro-adjustment of the cutting wheel. The knurled thumbscrew then locks the setting. The hardened steel wheel cuts wood fibres rather than tears them, which leaves a clean mark, even on cross grain. The wheel’s single-sided bevel also forces the gauge face against the stock, maintaining accuracy. 170g. Order no. Price CT-180206 $17.00 Order no. Price MGE-1005 $51.00 Order no. Price MGSE-1005 $61.00 Order no. Price CT-CPS $8.00 Order no. Price PF-1228 $32.00 Order no. Price 05N65-01 $37.00 Order no. Price 05N31-01 $23.00 Order no. Price PW-101 $19.00Order no. Description Price WP-5009 Pencil with lead $26.00 WP-LEAD Spare leads 2 pack $6.00 Order no. Description Price A. N-0501 Marking knife & Sheath $32.00 B. JMK-23 Kiridashi Marking Knife $28.00 Order no. Price 05N50-01 $78.00 Order no. Price KU-40 $50.00 Order no. Description Price 05N35-10 Marking Gauge $57.00 15N01-01 Optional Mortise gauge heads $15.00
  • 66. Marking & Measuring 64 For more information & to shop online go to www.carbatec.com.au VERITAS® SLIDING BEVEL The obvious benefit of this design is that the locking mechanism is completely flush, al- lowing the bevel to be used on either side. But more important, it can be used in the most restricted places since the lever cam lock can be operated with a single finger. Since the locking mechanism operates by compression with no rotary movement, ac- curacy is perfect. This is the best sliding bev- el design on the market. Two sizes available. 550g/400g. VERITAS® BEAM COMPASS Ordinary compasses just don’t cut it in the shop; a beam compass (or trammel) is much more practical. Using a single beam section our compass deals with circles from 38mm to 600mm in diameter. Additional sec- tions take you up to 2032mm for circular tables, rockers, arches, etc. It has carbide- tipped pins that readily scribe metal as well as wood, although pencil head is usually used for scribing wood. A micro-adjust fea- ture quickly give accurate setting. 2kg. VERITAS® CARPENTER’S GAUGE Specifically designed to be carried in an apron or pocket, this is both a direct-reading compass and a marking gauge, two things that carpenters frequently need but find hard to carry. It has a rotatable head, which locks vertically for use and horizontally for stor- age and tip protection. It is direct reading, for both radius and diameter, in inches and centimetres. Made of brass, stainless steel and high-impact ABS, it is 7-1/2” long over- all, and will scribe circles up to 12” diameter. Patented. Made in Canada. VERITAS® TRANS- FER LOG SCRIBE This tool is used for transferring the con- tours of one shape onto another. This is what makes it an ideal log scribe. But this also makes it an excellent carpenter’s scribe. It can translate that not- so-straight, 100-year- old wall profile onto a cabinet panel, letting you get a perfect match. The rotatable dou- ble-level post can be adjusted and locked in any position on either axis. The pointed end of the steel pin is for compass work; the blunt curved end is non-marring for transfer scribing. Usable with any standard pencil, it comes with a purple indelible pencil that marks well with light pressure. 525g. VERITAS® BEVEL SETTER A sliding bevel is an excellent tool for transfer- ring angles but not for reading them. This bev- el setter lets you set specific angles (from 0° to 60° in 1/2° increments) on a sliding bevel or a workpiece as well as read angles al- ready set. Both functions are useful for dove- tailing, for machine set-up, for polygon work, or for accurately fitting a piece in a restricted location. The etched stainless-steel blade is 3” wide and 7” long. 300g. GARRETT WADE ODD JOB LAYOUT TOOL We understand that “old timers” used to say: “All you needed was a #1 Odd Job, a hammer and a saw, and you could build anything”. Made by Stanley from 1888 to the early 1930’s, it seems as useful to us today as it was then. Made of solid brass and steel, it is carefully machined on all sides. It’s an inside mitre and try square, a depth gauge, a scribing tool for arcs and circles. A T-square, a depth marking scribe (excellent for mark- ing out mortises), a plumb level, and the 6” Maple Brass-edged rule (also marked in mm on the reverse side). VERITAS® DUAL MARKING GAUGE With two independently adjustable rods, this gauge lets you set two measurements at once, so you can quickly alternate be- tween them when transferring or marking repetitive dimensions. The hardened steel wheel cutters scribe perfectly at any point of their circumference. Since they cut wood fibres rather than tear, marks are clean, even on cross grain. The cutting wheels are oriented with opposing bevels, ensur- ing that you can always set the bevel in the waste side of a cut. PRECISION DOUBLE SQUARES Available with a 100mm (4”) blade or a 150mm (6”) blade, it features a slimmer than normal stock and an accuracy guaranteed to be better than 0.001” per inch, exceed- ing our regular machinist’s squares. It dou- bles as a try square and a precision square, suitable for both layout work and machinery set-up and checking. The precision open- work casting not only provides the accuracy required but avoids the stock-heavy feel of most machinist’s squares. The blade locks securely in any position from full left to full right. Graduations in imperial. Made in USA. Sold separately VERITAS® TAPERED GAUGES This gauge gets its accura- cy by effectively stretching any scale for ac- curate reading. These stretch the standard scale by a factor of seven. When a thickness difference of 1/8” is stretched over 7/8” of the scale, small differences in thickness can easily be measured with fine accuracy. Used many ways - for setting fences, router bits and drill-press stops. 104g. Order no. Description Price 05N44-01 Large $72.00 05N44-02 Small $64.00 Order no. Price 05N30-01 $170.00 Order no. Desc. Price 23N02-01 Odd Job Tool $41.00 19S11-02 300mm Ruler $16.00 Order no. Price 05N36-01 $32.00 Order no. Price 05U05-01 $129.00 Order no. Description Price 05N66-01 Imperial $51.00 05N66-03 Metric $51.00 Order no. Description Price 24N08-01 4” (100mm) $33.00 24N08-02 6” (150mm) $37.00 Order no. Price 05N38-03 $48.00 Order no. Price 05N70-01 $72.00 Order no. Price 05N70-01 $72.00
  • 67. Marking & Measuring 65Want to see more? See our website for our full range of products. IRWIN MARPLES ADJUSTABLE BEVEL Blade length: 300mm. GROZ DEPTH & ANGLE GAUGE The ability to measure depth and angles is combined in this versatile tool. The head is made from selected steel and has an attrac- tive black finish. It is graduated both left and right to 15°, 30° & 45° and the rule can be set to any of these angles. Tool supplied with 150mm rule. 250g. FLEXIBLE CURVE WITH RULER This flexible plastic rule is great for making patterns or marking out curves. Ruler meas- ures 60cm in 1mm graduations. 145g. 9” ROSEWOOD SLIDING BEVEL Steel blade, used for marking and transfer- ring angles. 170g. MACHINISTS SCRIBE This scribe is for machinists, engravers, mechanics and craftsmen. A basic tool for scribing and marking, these can be used on metal, glass, plastics and ceramics. Scriber points are hardened to 55-60 HRC. IRWIN MARPLES STAINLESS SQUARES PRECISION ENGINEERING BOXED SQUARE SET Includes 150, 100 & 50mm squares. Hard- ened steel blades are fixed permanently to the stock by means of a tapered self locking rivet which ensures complete rigidity. 725g. EMPIRE PROFESSIONAL COMBINATION SQUARE Stainless steel blade, made in USA, 300mm blade length. Used for making accurate 45° & 90° markings, etc. 128g. COMBINATION SQUARE SET A nice quality combination square and rea- sonably priced too! Set has metric and im- perial scales with non-reflecting finish, centre finder, protractor and 90-45° stock. Rule is 300mm in length - in 0.5mm & 1/32” gradu- ations. Supplied in plastic storage case. 1.4kg. ANGLE FINDER For external and internal angles its the most efficient, innovative, versatile angle finder available. Made of solid aluminium. Main arm is 500mm long. 270g. NOBEX OCTO SQUARES A folding square with lock- ing positions at every 22.5° détente between 0° and 180°. Each position has a guaranteed tolerance of ±0.05°. DOVETAIL SADDLE MARKERS For quick, ac- curate marking of dovetails, a dovetail marker is the best tool for the job. These new dovetail sad- dle markers are precision ma- chined at 1:6 and 1:8 angles, the traditional angles for softwood and hardwood dovetails respectively. The new 14˚ angle is great for thin stock providing stronger interlock. The long legs ensure accurate registration. The inside corner is relieved to ensure flush seat- ing even on saw whiskers. Made from ano- dised aluminium. 100g. VERITAS® DOVETAIL MARKERS For quick, accurate marking of dovetails, a dovetail marker is the best tool available. With riding ledges on both sides, this 2” x 2” marker can be flipped over to mark both slopes of the dovetail. Made from anodised aluminium. Available in a set of the traditional ratios: 1:6 for softwood and 1:8 for hard- wood, or the new 14˚ model for thin material providing stronger interlock. 70g. Order no. Price IRW-10503547 $50.00 Order no. Price GZ-1214 $16.00 Order no. Price D-00503 $16.00 Order no. Price CT-260435 $21.00 Order no. Price GZ-03210 $11.00 Order no. Blade Length Price IRW-10503545 350mm $48.00 IRW-10503544 300mm $43.00 IRW-10503543 250mm $40.00 Order no. Description Price GZ-01012 Set of 3 $77.00 GZ-01000 50mm only $20.00 GZ-01002 100mm only $28.00 GZ-01003 150mm only $31.00 Order no. Price IRW-250M $49.00 Order no. Description Price CSQ-1625 Square Set $65.00 Order no. Price T-103C $24.00 Order no. Description Price NBX-OCTO200 200mm $47.00 NBX-OCTO300 300mm $50.00 NBX-OCTO400 400mm $58.00 Order no. Description Price 05N61-01 Saddle Square 05N61-04 1:6 Marker $20.00 05N61-05 1:8 Marker $20.00 05N61-08 14° Marker $20.00 Order no. Description Price 05N10-10 Set of 2 $17.00 05N10-12 14° single $10.00
  • 68. Marking & Measuring 66 For more information & to shop online go to www.carbatec.com.au VERITAS® SQUARE FENCE A carpenter’s square is frequently needed just because of its size. The key disadvan- tage of such a square (its lack of a support- ing fence ledge) can now be eliminated using a Veritas square fence. The 8” long anodised aluminium extrusion can be readily attached to either the stock or blade of your square (depending upon intended use) with the two integral brass screws. The face of the square fence aligns with the edge of the workpiece while the weight of the framing square rests on the material. 250g VERITAS® SLIDING SQUARE This cabinetmaker’s square is used to lay out or transfer measurements quickly and accurately-you always have an ample refer- ence face against your work without having to flop the square. This also simplifies work- ing in two axes at once (e.g., measuring in 50mm and over 38mm), substantially reduc- ing the chance of error when measuring and marking two dimensions. The stainless-steel blade is 77mm wide and 152mm long, ma- chine ground on all four edges. The diamond cut-out in the blade holds a pencil tip in posi- tion and makes it easy to draw lines parallel to an edge. Accurate and well made. 317g. TAPE TIP Used with any standard tape measure, this device helps you measure diagonals with confidence. An angled boss on the under- side hooks securely on a corner while a measurement is taken. For an inside meas- urement, you simply add 1” to the measure- ment indicated on the tape measure, while outside measurements are direct read. To turn a tape measure into a compass or a marking gauge, use the centre hole with a screw or nail for laying out an arc or circle, or use the V-notch end to locate a pencil for marking straight lines. MITRE SQUARE Steel blade, brass edges on both faces. 125mm blade. 95g. JAPANESE TRY SQUARE Made from stainless steel this instrument combines the best of both a 90° and 45° square. The base is 159mm long with a height of 100mm. 210g. VERITAS® RULER STOP The Veritas ruler stop increases the useful- ness of a metal ruler by providing a solid reference point. It is ideal for setting saw fences, repeat cuts, etc. To use, slide the stop over the ruler end and tighten it at the desired position. Repositioning is fast and easy. The stop’s anodised aluminium body is contoured to fit comfortably between thumb and forefinger, with raised ridges for a bet- ter grip. Accommodates rulers from 7/8” to 1-1/8” wide and up to 0.05” thick. 45g. STOP RULE - 30CM These are handy for layout and machine set-up, because the movable stop provides a reli- able reference point. You can use them to locate saw fences, plot the position of hardware mounting holes, set the height of a saw blade or router bit, and draw lines parallel to any flat surface. The stop face is 2” wide for solid registration, and the ruler tip is 7/32” thick to provide a broad land when using the tool as a height gauge. Graduated in Imperial/metric. Each scale has a vernier for adjustment to within 1/128” or 0.1mm without parallax error. Made from chromed steel with a non-glare matte finish, each rule has clear etched and black-filled markings and a knurled locking knob. 540g. VERITAS® MITRE SADDLE When work- ing on small items such as picture frames, a large combi- nation square or try square can often be cumber- some. Not so with our mitre saddle. The relatively small size makes it easy to use. Despite its size, it still has a large reference face (3-1/2” at the wide end) set at 45°. The leg measures 1” wide by 2-1/4” long. As with our saddle squares, the sides are machined so that a line can be easily and accurately transferred around workpiece corners. The inside cor- ner is relieved to ensure perfect registration, even on saw whiskers. Made from anodised aluminium. 40g. KINCROME SQUARE & RULES Rafter square is 600 x 400mm. Made from high-grade aluminium with high visibility per- manently etched graduations on both sides. Stainless steel rulers available in 1m and 600mm. Double-sided, with metric and im- perial etched graduations. There is a conver- sion table on the reverse side of both rulers. Order no. Price 05N54-01 $33.00 Order no. Price 05N32-05 $51.00 Order no. Price CT-260505 $11.00 $29.00 Order no. Price 49N0502 $30.00 Order no. Price 05N68-01 $22.00 Order no. Price 50K58-01 $9.00 Order no. Price 05N56-15 $22.00 Order no. Size Price KIN-K11075 Square $29.00 KIN-64005 1m rule $35.00 KIN-64004 600mm rule $14.00 Order no. Description Price 88N89-12 30cm Stop Rule $30.00
  • 69. Marking & Measuring 67Want to see more? See our website for our full range of products. INCRA 6” PRECISION PROTRACTOR We’ve reinvented the protractor by putting extra long guide slots at every 45°, 30°, 22.5°, 5°, 1° and 0.5° interval to plot any angle with ease and absolute accuracy. INCRA GAUGE Designed for multiple needs. This tool should be in every woodworkers’ shop. Works as a precision marking gauge, a freestand- ing depth-of-cut gauge, a fence alignment gauge and a centre finder. MARKING RULES 10” DECIMAL/MM This is our 10” Decimal Inches and Millime- tres Marking Rule. The perfect combination of traditional English and modern Metric measuring. This rule offers marking holes and slots at every 1/20th of an inch and every 1/2 millimetre. INCRA CENTRING RULE 300MM Find the exact centre of any workpiece up to 300mm wide. In addition to top and bottom micro-fine marking holes at every 1/32” it also has a built-in protractor with guide slots at every 45°, 30°, 22.5°, and 5° interval. INCRA PROFES- SIONAL T-RULES This is the most ver- satile and precise rule we offer. These Professional T-Rules are also available in 12 inch/300mm lengths and both lengths offer Incra’s patented marking holes at every 1/16th, 32nd, 64th &1/100th inch. They have marking holes at every .5mm as well! INCRA PRECISION BEND RULES Make dual-surface layouts a snap using the corner slots shown above. The INCRA Bend Rule is precisely what you need for layout and measurement along the edge of a board or other workpiece. The 90° shape holds it snugly in place while the two scale surfaces let you mark and measure on the top, edge and corners simultaneously! There are even two vertical end scales for drawing preci- sion parallel lines relative to the edge of your work. MARKING RULES METRIC 150 & 300MM The Metric Marking Rules are precisely what’s needed for accuracy. These rules offer marking holes at every 1/4 millimetre! This is unmatched in the industry of marking rules. MECHANICAL PENCIL (0.5mm) To suit all Incra precision rules and layouts. The micro-fine guide holes on INCRA rules are designed for a perfect mark with the .5mm lead size in your mechanical pencil. This design elevates the inexpensive .5mm pencil into a precision marking and layout in- strument. All of the marking holes in INCRA rules require the .5mm size. INCRA 6” X 3” PRECISION X-Y MARKER Locate and mark the intersecting point of two perpendicular lines, all in one quick easy step. This 6 inch by 3 inch Rule with micro- fine marking holes at every 1/16” gives you 4,608 different exact positions instantly. KREG® MULTI-MARK This incredibly handy multi-purpose marking and measuring tool, perfect for a wide variety of household and jobsite applications. BLACK ANODISED ALUMINIUM ADHESIVE RULE Ideal for table saws, router tables, custom made jigs and a hundred other uses. Dual scale metric 760mm in 1mm increments and imperial scale 30” in 1/16” increments. STAINLESS STEEL RULES A. B. C. D. Order no. Price IN-IG32 $21.00 Order no. Price IN-PRO160M $40.00 Order no. Price IN-RULDM10 $23.00 Order no. Price IN-CENT300M $26.00 Order no. Size Price IN-TDPROT06 6”/150mm $34.00 IN-TDPROT12 12”/300mm $45.00 Order no. Size Price IN-BND150M 150mm $23.00 IN-BND300M 300mm $30.00 Order no. Size Price IN-RULE150M 150mm $14.00 IN-RULE300M 300mm $23.00 Order no. Price IN-IRPENCIL $3.00 Order no. Price IN-XY0603 $39.00 Order no. Price KR-KMA2900 $26.00 Order no. Price 76030 $11.00 Order no. Description Price RU-300 A. 300x25mm metric $9.00 RU-150W B. 150x18mm metric $8.00 RU-150 C. 150x13mm metric $8.00 CR-6 D. Metric & imperial, 150mm fitted with moveable pocket clip which doubles as a depth gauge stop $3.00
  • 70. Marking & Measuring 68 For more information & to shop online go to www.carbatec.com.au DIGITAL ANGLE RULE Overall length 400mm, 200mm when folded. Will measure from 0° to 360° in 0.1° incre- ments. Digital display can be zeroed at any location. A hold button to freeze your last reading is conveniently located near the readout. Their is also a mechanical lock to prevent further movement once the desired angle is reached. 3V CR2032 Lithium battery included. VERITAS® STRAIGHTEDGES A straightedge is extremely useful for setting up machines such as planers and jointers. We offer two types. Both are wide enough to stand on edge unsupported, so you have both hands free to make precise adjust- ments. Our anodised aluminium straightedg- es are 1-3/4” high and 7/16” wide, and will not rust. The reference edge is machined flat to within 0.003” over the entire length. Where extreme accuracy is needed, our solid steel bar has both edges precision ground flat to within 0.001” over the entire length. DIGITAL HEIGHT GAUGE Displays in met- ric, imperial and fractional impe- rial. The gener- ously over-sized magnetic base gives great sta- bility while the L- shaped contact provides reach over larger router bits. This tool can even be used to accurately set or re-calibrate the analogue scale on your saw, spindle moulder etc. Max height is 150mm. DIGITAL ANGLE FINDER Why bother measur- ing and estimating angles with a hand gauge when you can use this digital tool to provide quick, precise angle readings on your tablesaw or any other woodworking machine! This precision tool provides digital readings from zero to 180° to within 0.1° accuracy. Secures to tool being measured with integral rare earth magnets. 5 minute auto shut-off. Includes battery. 166g. HEAVY DUTY DIGITAL ANGLE FINDER Our latest angle finder that is the HD version of its predecessor with a couple of additional features. This unit is beautifully made of alloy with magnets fixed on both sides (instead of the bottom) of the screen allowing for easy fixture and reading in all situations. The extra large digital read- out also has arrows that indicate which direc- tion you are reading ie - left or right. Includes battery. 250g. DIGITAL THICKNESS GAUGE Capacity 0-150mm. Display can read in mil- limetres, inches and fractions of inches with a push of a button. This unit also features a very convenient hold function. 160g. VERNIER HEIGHT GAUGE Ideal for router and saw table setups, etc. Range is from 0 to 180mm. 460g. CARBA-TEC® 200MM DIGITAL CALIPER With extra large LCD readout. Reads in met- ric, imperial and fractional imperial from 0 to 200mm. Stainless steel construction sup- plied in plastic storage case. 420g. CARBA-TEC® 150MM DIGITAL CALIPER Made from durable carbon fibre with large digital display. Instantly converts from imperi- al to metric. Excellent value for money. 125g. GROZ 200MM CALIPER SET These are engineering quality precision instruments. The set includes one outside caliper, one in- side caliper and one divider. Set is supplied in vinyl wallet for safekeeping. 700g. VERITAS® PRECISION RULE Easily to become the most-used measur- ing tool in your shop. An ideal size for cab- inet-making, it has the accuracy of an engi- neer’s square (0.001” per inch of length). All four edges are ground, and both fac- es are graduated on the inside and outside edges. Graduations are in half millimetres on the 8cm leg and in millimetres on the 15cm leg. BMI 8 & 2M TAPES BMI are amongst Germany’s leading manu- facturers. 2m has special treatment of the refined steel tape enabling it to unroll on its own and has a handy locking mechanism. 8m tape has robust rubber case made to withstand the rigors of on-site work, easy to operate mechanism and has a belt clip that make this tape a joy to use. Made in Ger- many. Order no. Price DAR-200 $37.00 Order no. Price DHG-1 $73.00 Order no. Description Price 05N62-00 12” steel $51.00 05N62-01 24” steel $61.00 05N62-03 36” steel $92.00 05N63-03 38” aluminium $57.00 Order no. Price AFB-15 $59.00 Order no. Price AFB-LD220 $79.00 Order no. Price ODC-150 $48.00 Order no. Price HG-1 $31.00 Order no. Price CDK-200 $62.00 Order no. Price PDC-730 $20.00 Order no. Price GZ-1493 $55.00 Order no. Price 05N35-03 $30.00 Order no. Desc. Price BMI-METER 2m $16.00 BMI-472841 8m $20.00
  • 71. Handtools & Handplanes 69Want to see more? See our website for our full range of products. HSS CORNER CHISEL Ideal for cleaning of mortise corners, hinge rebates, lock recesses, etc. Blade is 10mm x 10mm. 160g. HAMLET MORTISE CHISELS Thicker and stronger than a normal chisel to take the punishment inherent with mortising. Leather washers absorb heavy blows. HAMLET BEVEL EDGE CHISEL SET These bevel edge chisels are beautifully balanced and are well suited for fine joinery and general cabinetmaking. Overall length: 270mm, blade widths: 6, 13, 19 and 25mm. Made in UK. 700g. PFEIL SWISS MADE BEVEL EDGE CHISEL SET This quality set is supplied with hornbeam handles and presented in a European beech case. All chisels are made to the same high standard as Pfeil carving tools. Chisels are sharp out of the box but may need final hon- ing depending on your preference. Kit in- cludes: 6, 10, 12, 16, 20 and 26mm chisels. IRWIN MARPLES HIGH IMPACT CHISEL SET OF 6 Hand forged and fitted with special handles, which are guaranteed split proof for life, this set has 6 chisels, 6mm, 10mm, 13mm, 19mm, 25mm and 32mm. They all come in a wooden presentation box. 2kg. JAPANESE BEVEL EDGE CHISELS JAPANESE 6 PIECE ECONOMY CHISEL SET Handles are turned from Japanese red oak. Each of the chisels is hollow ground on the back to facilitate maintenance of a flat sur- face when sharpening. All chisels are made of laminated steel. Sizes include 6, 9, 12, 18, 24 and 30mm. Overall length of each is approximately 220mm. IRWIN MARPLES HIGH IMPACT CHISELS INDIVIDUAL JAPANESE BUTT CHISELS Made in Japan, these West- ern Style butt chisels are ground and honed ready for use straight out of the packet. The ovoid shaped handles are extremely com- fortable and allow for a very firm hand grip. The handles are almost indestructable being made from a butyrate compound. The high-carbon alloy steel blades will keep a keen edge for longer. Highly recommended. Overall length 200mm. PFEIL CABINET MAKERS CHISELS Blades are forged from K 510 steel, hard- ened to 60 Rc. Handles made of strong, oiled elm wood from Switzerland. Set includes six carpenters chisels in a rugged canvas roll. Widths included: 6, 10, 12, 16, 20 and 26mm. ROBERT SORBY CHISEL SET Bevel edge chisels are the most versatile and universally used of all bench chisels and should form an integral part of any woodworkers toolkit. Side bevels reduce the risk of binding in the cut as well as allowing access to undercuts, like dovetails. Each chisel has a 20 º primary bevel and a 25º secondary bevel and each is honed ready for use. Order no. Price CC-01 $48.00 Order no. Description Price HCT-033 1/4” $49.00 HCT-035 3/8” $49.00 HCT-036 1/2” $49.00 HCT-038 3/4” $55.00 HCT-040 1” $65.00 Order no. Price HCT-011 $135.00 Order no. Price PF-BC-6 $239.00 Order no. Price IRW-10501697ANZ $171.00 Order no. Description Price MBE-6 6mm $24.00 MBE-9 9mm $26.00 MBE-12 12mm $26.00 MBE-15 15mm $27.00 MBE-19 19mm $29.00 MBE-22 22mm $30.00 MBE-25 25mm $30.00 MBE-32 32mm $32.00 MBE-38 38mm $34.00 MBE-SET Set of 9 $235.00 Order no. Price JCS-6 $339.00 Order no. Desc. Price IRW-10501671ANZ 3mm $26.00 IRW-10501673ANZ 6mm $29.00 IRW-10501675ANZ 10mm $30.00 IRW-10501677ANZ 13mm $32.00 IRW-10501682ANZ 19mm $33.00 IRW-10501685ANZ 25mm $34.00 IRW-10501689ANZ 32mm $41.00 IRW-10501691ANZ 38mm $45.00 IRW-10501693ANZ 50mm $61.00 Order no. Description Price MBC-14 1/4” $29.00 MBC-38 3/8” $29.00 MBC-12 1/2” $30.00 MBC-58 5/8” $30.00 MBC-34 3/4” $32.00 MBC-1 1” $32.00 MBC-114 1-1/4” $34.00 MBC-SET Set of 7 $185.00 Order no. Price PF-CM-SET-6 $235.00 Order no. Price RSB-5510 $259.00
  • 72. Handtools & Handplanes 70 For more information & to shop online go to www.carbatec.com.au JAPANESE NOMI (CHISELS) A. B. C. A. CHU-USU-NOMI BEVEL EDGE CHISEL/OAK B. OIRE NOMI BUTT CHISELS/OAK C. UMEKI-NOMI DOVETAIL CHISELS/ OAK PFEIL BUTT CHISEL SET A pleasure to use. They feature comfort- ably faceted and con- toured European Locust handles and blades made of Swiss alloy tool steel that is heat treated using the latest technology for excellent edge holding. Overall length of each chisel is 6”, blade length of each is 3-3/8”. SWIVEL HEAD NAIL PULLER Features adjustable foot, lockable at 5 angles (80°, 105°, 130°, 155° and 180°). The swivel head is easily adjusted by way of a spring- loaded thumb lever. An excellent addition to any toolbox. Specifications: 400mm long, 700g, rated to 150kg. Solid steel construction with polypropylene han- dle. TRADITIONAL JAPANESE KITCHEN KNIVES Made from high carbon steel which keeps a far better edge than stainless steel. These knives will rust - not dishwasher safe. Listed from left to right. ROBERT SORBY PARING CHISELS These paring chisels feature a 9-3/4” long, flat, thin blade that ta- pers towards the cut- ting edge to provide the finest of cuts. Used for hand paring with one hand on the han- dle and the other controlling blade. Bevels on the top face enable access to difficult cor- ners. Fitted with boxwood handle. JAPANESE SHEARS Designed for use with cloth or paper. Tradi- tional design that is ergonomic and enjoy- able to use. Cutting edges are laminated in the traditional way. VERITAS® BENCH CHISELS Precision made by Veritas in their own ma- chine shop. Turned and milled from solid bar stock, the blades are O1 tool steel, chosen for its ease of sharpening and its excellent edge-retention properties at low bevel an- gles. The 1/4” and 3/8” chisels have 30° primary bevel angles; the others are ground at 25°. All have 2° micro-bevels, and require only final honing before use. BATONING CHISEL- RH To baton something is to hit it with a club. This is what you do when using the side bevel of this chisel to split wedges from a section of 2x4, as one example. A sturdy tool, the chisel has a stainless-steel handle double-scarf welded to a manganese steel blade. 170mm long. Order no. Description Price JBC-03 3mm, 110g $84.00 JBC-06 6mm, 120g $84.00 JBC-09 9mm, 150g $86.00 JBC-12 12mm, 100g $89.00 JBC-18 18mm, 290g $98.00 JBC-24 24mm, 290g $108.00 JBC-30 30mm, 330g $114.00 JBC-36 36mm, 350g $133.00 Order no. Description Price C-5203 3mm, 90g $43.00 C-5206 6mm, 90g $43.00 C-5209 9mm, 90g $43.00 C-5212 12mm, 100g $46.00 C-5215 15mm, 120g $46.00 C-5218 18mm, 130g $46.00 C-5221 21mm, 140g $50.00 C-5224 24mm, 150g $52.00 C-5230 30mm, 170g $54.00 C-5236 36mm, 200g $72.00 C-5242 42mm, 220g $72.00 Order no. Description Price JDC-03 3mm, 120g $70.00 JDC-06 6mm, 130g $76.00 JDC-09 9mm, 150g $82.00 JDC-12 12mm, 170g $82.00 JDC-15 15mm, 200g $82.00 JDC-18 18mm, 210g $94.00 Order no. Price PF-SBC-4 $133.00 Order no. Price NP-55011 $28.00 Order no. Description Price 60343 Fruit & Small fish knife, 264mm $34.00 60014 Fish & Fish bone knife, 289mm $51.00 60252 Vegetable Knife, 300mm $41.00 60242 Heavy Vegetable Knife, 298mm $41.00 60022 Sushi & Meat Knife, 330mm $44.00 Order no. Size Price SN-258 100mm $37.00 SN-259 150mm $61.00 Order no. Size Price 05S20-04 1/4” $75.00 05S20-06 3/8” $75.00 05S20-08 1/2” $79.00 05S20-12 3/4” $85.00 05S20-16 1” $95.00 Order no. Price 09A02-45 $22.00 Order no. Description Price RSB-24114 1/4” Paring Chisel $61.00 RSB-24138 3/8” Paring Chisel $62.00 RSB-24112 1/2” Paring Chisel $62.00 RSB-24134 3/4” Paring Chisel $68.00 RSB-24110 1” Paring Chisel $70.00
  • 73. Handtools & Handplanes 71Want to see more? See our website for our full range of products. JAPANESE NAIL PULLERS Both feature a standard paw tip, the JNP-200 has a wafer-thin pry tip for easing apart cabi- nets in repair work without marring the wood, the JNP-270 miniature crowbar has a straight end. Until you have used these tools, it is dif- ficult to appreciate their versatility. Removing moulding, separating mitre joints in frames and easing off paint seized hardware are just a few applications. JNP-200 shown. A. B. C. D. E. F.G. H.I. J. K. L. M. KUNZ VENEERING HAMMER This traditional veneer ham- mer features a half round 3-5/8” wide edge. This perfectly smooth edge is important for squeegeeing the veneer down and for smoothing out any glue bumps. (L) 279mm, (W) 88.9m. 520g. Made in Ger- many by KUNZ. PFEIL ADZE, HATCHETS & AXES These tools are forged from high quality steel, then hardened and sharpened. A. B. C. D. E. F. VENEER ROLLER A heavy duty, high quality ve- neer roller. A cranked-neck sol- id steel shaft allows you t o apply heavy pressure while keep- i n g your hands free of the workpiece. Overall length: 350mm with a 100mm deep offset crank shaft. GROZ COPING SAW Throat depth: 120mm, sup- plied with one standard 6” pinned blade. CARBA-TEC® JEWELLERS SAW 8” & 12” SAWS 8”- tooth pitch 1.25mm, blade length 200mm, kerf 0.9mm. Max. depth of cut 55mm. 12” - tooth pitch 1.8mm, blade length 300mm, kerf 1mm. Max. depth of cut 77mm. PAX 8” GENTS SAW Beautifully made but inexpensive saw suit- able for dovetailing or trimming. Tooth pitch 1.25mm, blade length 200mm, kerf 0.9mm. Max depth of cut 45mm. Order no. Desc. Price JNP-200 200mm, $32.00 JNP-270 270mm, $30.00 Order no. Description Price A. CT-260420 Wooden Carpenter’s Mallet $29.00 B. JH-115 Hammers with 1 flat end & one round end $43.00 C. JH-225 $49.00 D. JHW-48 48mm Traditional Japanese Wooden Mallet $26.00 E. PF-HK70 HornBeam Carver’s Mallet L:280mm Dia:70mm $63.00 F. PF-HK80 HornBeam Carver’s Mallet L:280mm Dia:80mm $85.00 G. PF-HK90 Hornbeam Carver’s Mallet L:280mm Dia:90mm $95.00 H. PF-HK110 Hornbeam Carver’s Mallet L:280mm Dia:110mm $106.00 I. PF-BM-500 Pfeil Brass Mallet L:200mm, Dia: 47mm $95.00 J. PF-BM-800 Pfeil Brass Mallet L:220mm, Dia: 49mm $105.00 K. 05E15-01 Veritas Cabinetmakers Mallet $51.00 L. PU-038 Deadblow Hammers $19.00 M. PU-050 Deadblow Hammers $29.00 Order no. Price KU-104 $71.00 Order no. Description Length Blade Width Price A. PF-AXE Pfeil Axe 450mm long - $145.00 B. PF-HAT-S Pfeil Sculptor’s Hatchet 280mm 80mm $169.00 C. PF-ADZE-S Pfeil Curved Adze -Small 280mm 50mm $145.00 D. PF-ADZE-F Pfeil Flat Adze 450mm - $145.00 E. PF-ADZE-K Pfeil Straight Adze - Small 280mm 50mm $145.00 F. PF-ADZE-R Pfeil Round Adze 450mm 70mm $137.00 Order no. Price CT-ROLLER $25.00 Order no. Size Price PAX-D8 8” Dovetail (shown) $175.00 PAX-T12 12”Tenon (not shown) $175.00 Order no. Price PAX-G8 $51.00 Order no. Description Price GZ-30220 Saw $14.00 GZ-CSBLADE Repl. Blade, 14tpi, 10 pk. $9.00 Order no. Price CT-190022 $29.00
  • 74. Handtools & Handplanes 72 For more information & to shop online go to www.carbatec.com.au PAX GUITAR FRET SAW 17tpi, 250mm blade length. Kerf 0.53mm. D. C. A. DOZUKI FINE PRECISION SAW Blade length: 150mm, Blade thickness: 0.2mm, kerf: 0.28mm, Max. depth of cut: 41mm, 30tpi. B. DOZUKI FINE PRECISION SAW Blade length: 210mm, Blade thickness: 0.2mm, kerf: 0.28mm, Max. depth of cut: 45mm, 30tpi. C. DOZUKI FINE PRECISION SAW Blade length: 240mm, Blade thickness: 0.3mm, kerf: 0.45mm, Max. depth of cut: 70mm, 30tpi. D. KUGIHIKI FLUSH CUT SAW Blade length: 180mm, Blade thickness: 0.2mm, Kerf: 0.2mm. NAKAYA GOLD SERIES PROFESSIONAL NOKOGIRI SAWS C. FINE TOOTH JOINERY SAW Blade length 240mm, kerf 0.41mm, blade thickness 0.30mm, t.p.i. 25. Very fine cut saw for dovetailing and other extremely pre- cise accurate cuts. 210g. D. PLUNGE CUT PANEL SAW Blade length 240mm, kerf 0.53mm, blade thickness 0.30mm, t.p.i. 17. 210g. TRADESMAN QUALITY JAPANESE SAWS A. B. A. CROSSCUT FLEXIBLE CARPENTERS Blade length 300mm, kerf 1.15mm, blade thickness 0.7mm, t.p.i. 12. 250g. B. CROSSCUT FLEXIBLE CARPENTERS Blade length 250mm, kerf 0.65mm, blade thickness 0.50mm 18tpi. 190g. E. E. GENERAL PURPOSE SAW Blade length 150mm, kerf 0.51mm, blade thickness 0.30mm, t.p.i. 18. 120g. A. B. C. D. E. G.E. RYOBA SAW Blade length: 240mm, Blade thickness: 0.5mm, Kerf: 1mm. F. RYOBA CROSSCUT SAW Kerf: 1mm. 10tpi on one side, the other grad- uates from 4tpi to 8tpi. G. KATABA SAWS Blade length: 250mm, Blade thickness: 0.5mm, Kerf: 0.8mm, 18tpi. Blade length: 270mm, Blade thickness: 0.6mm, Kerf: 1.0mm, 13tpi. PAX RAZOR SAW Designed for the finest of precision joinery, this beautiful saw will give an excellent finish. 40tpi. 150mm blade length. Kerf 0.3mm. PAX VENEER SAW This beautifully crafted veneer saw features an offset handle for surface clearance. The blade is double-sided and the teeth are chamfered on the edge to avoid tearout. PAX GUITAR SAW DEPTH STOP GUIDE This guide is designed to fit to the saw above. Made of perspex with brass fittings, it allows for fast and accurate depth setting for your frets. Saw not inc. PAX INLAY SAW This saw is ideal for fine inlay work where del- icate centre cutting is required. 20tpi. 75mm blade length. PAX CARPENTER’S SAWS Handcrafted from the finest allow steel and steamed beech, this beautiful saw is ta- per ground to the back of the blade to re- duce binding in the workpiece. The blade is ‘breasted’ or slightly convex at the front to counteract the swinging action of handsaw- ing to allow more teeth to be in contact with the timber. F. Order no. Price PAX-GS1 $59.00 Order no. Description Price WDG-150 Complete Saw $51.00 WDGB-150 Repl. Blade $27.00 Order no. Description Price WDG-210 Complete Saw $62.00 WDGB-210 Repl. Blade $32.00 Order no. Description Price WDG-240 Complete Saw $83.00 WDGB-240 Repl. Blade $43.00 Order no. Description Price KDG-180 Complete Saw $52.00 KDGB-180 Repl. Blade $30.00 Order no. Description Price Z-15011 Complete Saw $54.00 Z-15012 Repl. Blade $28.00 Order no. Description Price Z-15006 Complete Saw $49.00 Z-15007 Repl. Blade $26.00 Order no. Description Price Z-7029 Complete Saw $59.00 Z-7030 Repl. Blade $31.00 Order no. Description Price Z-7026 Complete Saw $51.00 Z-7027 Repl. Blade $26.00 Order no. Description Price Z-7010 Complete Saw $38.00 Z-7011 Repl. Blade $20.00 Order no. Description Price WRG-240 Complete Saw $79.00 WRGB-240 Repl. Blade $39.00 Order no. Description Price WRG-270 Complete Saw $88.00 WRGB-270 Repl. Blade $43.00 Order no. Description Price WKG-250M Complete Saw $58.00 WKGB-250M Repl. Blade $30.00 Order no. Description Price WKG-270M Complete Saw $59.00 WKGB-270M Repl. Blade $30.00 Order no. Price PAX-PR6 $41.00 Order no. Price PAX-VS $37.00 Order no. Price PAX-GS1-STOP $27.00 Order no. Price PAX-IS3 $41.00 Order no. Description Price PAX-22 10tpi. $179.00 PAX-26 8tpi. $209.00
  • 75. Handtools & Handplanes 73Want to see more? See our website for our full range of products. FLUSH CUTTING FLEXIBLE PULL SAW Features include: two sided replaceable blade, zero set on teeth for fast clean flush trimming of plugs, dowels, etc without dam- age to surrounding surface. Specifications: Blade Length: 150mm, Thickness: 0.40mm, Kerf: 0.40mm, Pitch: 21 tpi & 17 tpi, Impulse hardened, tri-edged teeth. Nickel plated for rust inhibition. 80g. VERITAS® PREMIUM CROSSCUT SAWS Filed with alternating bevel angles that sever rather than tear wood fibres for clean cuts in cross-grain applications, our crosscut saw has 16 teeth per inch. The teeth have 15° rake and bevel angles. VERITAS® PREMIUM DOVETAIL SAWS Features rip-cut teeth that have a rake angle of 14° and an included angle of 60°. The 14 tpi dovetail is most efficient with stock thicker than 1/2”, while the 20 tpi version is best for stock under 1/2” thick. VERITAS® RIP & CROSSCUT CARCASS SAWS Typically used to cut joints in drawer runners, dividers, and stretch- ers. The 12 tpi rip saw has a 10° rake angle and an included angle of 60°. The 14 tpi crosscut saw has a rake angle of 15° and an included angle of 60°. VERITAS® GENT’S SAWS Intended for those who wanted good-quality tools for occasional work. Our Gent’s saws have a 200mm long high-carbon blade that is just 0.015” thick with 0.003” of teeth set per side. The 20 tpi rip saw has a 14° rake angle and a 60° included angle. The teeth on the 22tpi saw have 15° rake and bevel angles and an included angle of 60°. Both saws have a cut depth of 40mm. VERITAS® MAGNETIC SAW GUIDES These saw guides are manufactured using preci- sion-machined aluminium extrusion. Each reference surface has an embedded 3/4” rare-earth magnet and is covered with a low- friction UHMW pad. The magnets keep the saw aligned as you cut; the pads allow the saw to slide easily against the reference surface. The clamp can accommodate material from 1/4” to 1” thick. The guides can be used with any backless saw that has approximately 0.005” or less of tooth set. Our dovetail saw is a suit- able companion. With a 2” x 8-1/2”, 22 tpi blade, the dozuki tooth form is effec- tive in both crosscuts and rip cuts. MERLIN 2-IN-1 PIN TYPE POCKET MOISTURE METER Single range moisture meter 5% to 50% in wood products and 1.5% to 33% in building materials such as brick or plas- ter. Working on the electrical resistance principle this instrument is ideal for comparative moisture readings on most common wood species. 75g. Made in Austria. MOISTURE METER WITH LCD DISPLAY This meter works using the electrical re- sistance principle and is ideal for com- parative moisture readings on common timber species and building materials. Range of 6 to 44% to an accuracy of 2% in timber. Building materials such as wall board, drywall, plaster, mortar and con- crete can also be measured to 0.05% from 0.20% to 2.0%. 127mm long. 130g. MERLIN WS13HD MOISTURE METER Maximum scanning depth is 20mm, minimum board thickness is 1.3mm. Moisture measurement range: 4% to 20% with high accuracy, up to 40% with lesser accuracy. This instrument is made especially for harder denser tim- bers. 180g. Made in Austria. MERLIN ECO-10 MOISTURE METER Maximum scanning depth is 20mm, minimum board thickness is 10mm. Moisture measurement range: 6% to 30%. 170g. Made in Austria. VERITAS® FLUSH CUTTING SAW Can be used anywhere that you want to cut off a projection without damag- ing the adjoining face. Order no. Description Price Z-150D Pull Saw $31.00 Z-151D Repl. Blade $20.00 Order no. Price MER-MOISTEC $165.00 Order no. Price MER-WS13/HD $595.00 Order no. Price MER-ECO-10 $409.00 Order no. Price 05K34-01 $27.00 Order no. Description Price 05T02-01 1:6 Ratio $64.00 05T02-02 1:8 Ratio $64.00 05T02-05 14° Guide $64.00 05T04-01 90° Guide $61.00 05T02-03 Dovetail Saw $30.00 Order no. Description Price 05T06-01 Veritas Premium Crosscut Saw $79.00 05T05-05 Veritas Premium Dovetail Saw 20tpi $79.00 05T05-01 Veritas Premium Dovetail Saw 14tpi $79.00 05T07-05 Veritas Rip Carcass Saw 12 tpi $79.00 05T07-01 Veritas Crosscut Carcass Saw 14 tpi $79.00 05T10-01 Veritas Gent’s Saw (Rip) 20tpi $85.00 05T10-05 Veritas Gent’s Saw (Crosscut) 22tpi $85.00 Order no. Price CT-EM4807 $69.00
  • 76. Handtools & Handplanes 74 For more information & to shop online go to www.carbatec.com.au VERITAS® BEADING TOOL Hand beading, fluting or reeding in hard or soft woods is an easy matter with the new VERITAS® beading tool. Using standard cutters or one that you custom shape, you can put fine detail in furniture quickly and accurately. The fence has two mounting locations to provide up to a 1” (25.4mm) blade offset and is positional to expose one of three bearing surfaces: flat for straight and convex ap- plications, curved for slightly concave and waved edges, and bullnose for more complex profiles. The handles are African rosewood with brass fittings. Supplied with a 3/32” radius single-point cutter and five blank cutters. RIVER CITY TOOLS® MULTIFUNCTION TOOL Our Multi-Tool features the following: pliers, wire cutters, 5 flat various size screwdrivers, 4 Phillips screwdrivers, 5 Allen keys, 1 socket, small knife, large knife, file, fish-scaler, hook remover, bottle opener/can opener. 460g. GROZ LEATHER PUNCH Professional quality pliers, each punch lo- cates exactly in position locking in place with the prawl and ratchet mechanism. Spring loaded revolving head incorporates 6 punch- es of sizes; 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm & 4.5 mm. 280g. POCKETWRENCH IITM . This is the next best thing to a real wrench! Stain- less steel, 1/8” thick, 4” long, and 1” wide – perfect for a pocket or tool pouch.Itwilltightenorremovenutsfrom3/16” to 11/16” or 5mm to 17mm. Made in USA. VERITAS® CORNERING TOOL Cut a fixed radius curve on an edge. Our cor- nering tools have a different radius cutter at each end. One cuts a 1/16” and a 1/8” radius and the other cuts a 3/16” and 1/4” radius. Set comes with a sharpening system which includes four different cutting radii, silicon carbide paper, and a holding wedge. 150g. VERITAS® MAGNETIC CORNER CHISEL. Designed for squaring off the corners of routed hinge gains. The 3/8” square blade is precision ground made of long-wearing A2 tool steel, hardened to Rc60. Two embedded rare-earth magnets hold the chisel squarely in place. A tap on the chisel cuts the corner square and flush with the routed edges. 300g. BOX CUTTER UTILITY KNIFE Fitted with two blades, one a utility blade, the other is a box cutter with replace- able Stanley style blade. Also comes complete with a stainless steel belt hook. 230g. CLASSIC AUTOLOADER Sick and tired of never having the right screwdriver handy? The Autoloader can be loaded with any 6 bits YOU want. Once loaded, changing between bits is as simple as pulling the handle back, selecting the de- sired bit and pushing the handle forward. Made in Canada. 195g. CHINESE SCISSORS (SET OF 4) This style of scissors has been made for over 300 years in China. Hand forged, they have a hard steel layer, laminated to a softer iron backing that supports the more brittle hard- ened layer. They come razor sharp. Their blade strength and sharpness make them useful in the shop, the garden or the kitch- en, or for crafts. Overall lengths are 140 to 216mm. An excellent buy in traditional tools. PRO SEAM RIPPER KIT The Pro kit in- cludes two sharp- end stitch- picker blades for starting a seam, and four safe-tip rip- pers that complete the job without snagging the fabric. Suitable for anyone who does sewing or handy crafts. Made in Canada. CAMELLIA OIL Used for generations as an ef- fective rust inhibitor for all tools. Just apply a tiny amount with a rag. 240ml (100g). Order no. Price LMT-1 $28.00 Order no. Price GZ-31600 $21.00 Order no. Price 25K17-01 $17.00 Order no. Price 05K50-30 $48.00 Order no. Price 50S01-01 $51.00 Order no. Price UKB-2B $14.00 Order no. Price AL-CLASSIC $30.00 Order no. Price 45K10-10 $16.00 Order no. Price 09A01-20 $20.00 Order no. Price CAM-1 $25.00 Order no. Description Price 05P04-50 Beading Tool $98.00 Optional Cutters 05P04-02 Single Point Cutter $8.00 05P04-03 Bead Cutters (3) $16.00 05P04-04 Flute Cutters (3) $16.00 05P04-05 Reed Cutters (2) $15.00 05P04-06 Blank Cutter (1) $5.00
  • 77. Handtools & Handplanes 75Want to see more? See our website for our full range of products. A. VERITAS® LOW ANGLE JACK An exceptionally versatile plane. It excels at end-grain work, is great for shooting, and also works well for smoothing. 15” long, 2-1/4” wide blade. VERITAS® STANDARD AND LOW ANGLE BLOCK PLANES These block planes stand apart from the rest. The tall side wings are ideal for shoot- ing, and finger grips in the sides improve control. The combined blade advance and lateral adjust is the most sensitive, accurate adjustment mechanism available. Two guide screws prevent blade shifting. Both planes are machined to exacting standards, with milled sides and sole that are surface ground to a fine finish. 6” long x 1-5/8” wide blade. 12° bed angle VERITAS® SKEW BLOCK PLANE This plane excels at trimming rabbets, work- ing end grain, or making final jointing cuts on boards. The blade is skewed at a 15° an- gle, which makes cutting easier, either with or across the grain, and helps pull the fence tight against the work. Available in left and right hand models. 6-3/8” long, 1-1/2” wide blade. A. B. C. B. VERITAS® BEVEL-UP JOINTER The largest member of our bevel-up bench plane family. The bevel-up blade configura- tion results in a plane that is versatile and straightforward to use. 22” long, 2-1/4” wide blade. C. VERITAS® BEVEL-UP SMOOTHER We have combined the generous width and weight of a dedicated smoother with the ver- satile inner workings of a low-angle bevel-up plane. 10” sole length and a blade width of 3-1/8”. D. VERITAS® #4 SMOOTHER The most commonly used bench plane. It is the ideal size for general smoothing and fin- ish work. Sole is 9-1/2” long and has a 2” wide blade. E. VERITAS® #4-1/2 SMOOTHER An excellent plane for the final smoothing of a surface already worked by other planes or a thickness planer. 10” long, with 2-3/8” wide blade. F. VERITAS® #5-1/4 BENCH PLANE Our #5-1/4W differs from the original in many ways, mainly, ours has a wider blade and the mouth is 4-3/8” behind the nose. For better accuracy, an extra-long sole in front of the blade makes it easier to keep the sole flush to the wood, when starting a cut. 12” long, 2” wide blade. G. VERITAS® #6 FORE PLANE One of our largest bench planes, the #6 fore plane is ideal for smoothing and flattening large surfaces, such as panels, table tops and workbench tops. The long sole ensures accuracy. 18” long, 2-3/8” wide blade. A. B. C. D. E. F. G. VERITAS® APRON PLANE This small, low angle block plane is ideal for trim carpentry. It is half the weight of a stand- ard block plane, a big plus if you carry it in an apron all day. Comes with a lapped 25° bevel blade made of A2 tool steel. A split-leather holster with brass fittings is sold separately. It keeps your apron plane close at hand while working and protects it from damage. 5-1/2” long, 1-1/4” blade width. VERITAS® BLOCK PLANES Made to exacting standards and features newly refined stainless-steel hard- ware. 178mm x 44.5mm. 12° Bed angle. A. B. BEVEL-UP BLADES SUITS 05P37-01, 05P36-01 Order no. Description Price 05P22-30 Standard Plane $195.00 05P22-01 Low Angle Plane $195.00 05P22-02 Repl. blade for both $40.00 Order no. Description Price A. 05P76-01 RH Skew Block Plane $259.00 05P76-02 RH Repl. Blade $37.00 B. 05P77-01 LH Skew Block Plane $259.00 05P77-02 LH Repl. Blade $37.00 C. 05P76-62 Opt. Fence Rod $9.00 Order no. Description Price 05P27-02 Apron Plane A2 $133.00 05P27-04 Repl. Blade $33.00 05P27-06 Opt. toothed blade $46.00 67K73-16 Leather Holster $30.00 Order no. Description Price A. 05P70-01 DX60, Made from ductile iron $245.00 B. 05P70-11 NX60, Made from corrosion resistant ductile iron $410.00 05P70-03 Replacement A2 blade to suit both planes $50.00 Order no. Price 05P37-01 $389.00 Order no. Price 05P36-01 $309.00 Order no. Description Price 05P26-01 #4 Smoother Plane $309.00 05P24-02 #4 Repl. Blade $56.00 Order no. Description Price 05P23-01 #4-1/2 Smoother Plane $309.00 05P23-02 #4-1/2 Repl. Blade $60.00 Order no. Description Price 05P34-01 Low Angle Jack Plane $329.00 05P34-02 Repl. Blade $60.00 05P34-03 Opt. High Angle Blade $60.00 Order no. Description Price 05P34-02 2-1/4” 25° bevel $60.00 05P34-03 2-1/4” 38° bevel $60.00 05P34-04 2-1/4” 50° bevel $60.00 05P34-06 2-1/4” Toothed $82.00 Order no. Description Price 05P24-01 #5-1/4 Bench Plane $309.00 05P24-02 Repl. Blade $56.00 Order no. Description Price 05P28-01 #6 Fore Plane $329.00 05P23-02 #6 Repl. Blade $60.00
  • 78. Handtools & Handplanes 76 For more information & to shop online go to www.carbatec.com.au VERITAS® SMALL SHOULDER PLANE Designed to seat nicely in the hand, our small shoulder plane is easily controlled using a one-handed grip. A 1/2” wide x 6-1/4” long ductile cast iron body is accurately machined flat and square. VERITAS® MEDIUM SHOULDER PLANE A versatile tool, our medium shoulder plane can be used on end grain. The 11/16” wide x 7” long body makes it ideal for rebate and dado work. VERITAS® LARGE SHOULDER PLANE 1-1/4” wide x 8-1/2” long and mass that bring both authority and precision to larger work. VERITAS® BULLNOSE PLANE This tool is two planes in one, serving as either a bullnose or a chisel plane. An adjustable set screw in the toe acts as a stop to accurately set the mouth opening. 4-3/4” long by 1” wide. VERITAS® SMALL BEVEL-UP BENCH PLANE With a size comparable to a #3 bench plane, this low-angle smoother is 228mm long, 58mm wide and weighs only 1.25kg. The machined and surface ground ductile cast iron body has a 12° bed angle and a move- able toe fully enclosed by the body casting. The locking front knob controls the toe to set the mouth opening. VERITAS® LOW-ANGLE SMOOTHING PLANE A low-angle smoothing plane has three key uses. It is used to smooth large surfaces, preferably taking a diagonal cut, partly across and partly along the grain. With its generous side wings, it is ideal for shooting mitres. Finally, it is excellent for end grain work of any kind. 10-1/2” long, 2” wide blade. VERITAS® FLUSH PLANE This plane is ideal for flush trimming of pro- jections such as glue lines, laminate edges, plugs, etc. 2” wide blade. VERITAS® ROUTER PLANE With a ductile cast iron body accurately ma- chined and ground flat to our high stand- ards, the Veritas router plane is ideal for cut- ting dadoes and grooves, for inlay or intarsia work, or for cleaning out areas to a precise depth. Blade depth is set by a fine screw feed, and a positive locking depth stop sets depth of cut. A spring-loaded collar holds the blade, allowing easy blade adjustment and removal. 12.7mm long blades. A. B. VERITAS® SMALL ROUTER PLANE A versatile tool for fine work, particularly on narrow material or confined areas, this plane excels at work requiring small recesses, grooves or dados. The comfortable, accu- rately machined ductile cast iron body has a lapped sole for accuracy. 1/4” wide blade. VERITAS® SIDE RABBET PLANE Used for cleaning up or trimming sidewalls of rabbets, dadoes or grooves to yield a per- fect fit with its mate. 4-1/2” long. VERITAS® SKEW RABBET PLANE Also known as a moving fillister, this rabbet- ing plane cuts quickly and quietly, avoiding the set-up, noise and dust associated with power tools. Blade width of 1-5/8”. 9-3/4” long. Order no. Description Price 05P42-01 Bullnose Plane $205.00 05P42-02 Repl. A2 Blade $47.00 Order no. Description Price 05P47-01 Sm. Shoulder Plane $215.00 05P51-03 Repl. A2 blade suits 05P47-01 $41.00 05P41-01 Med. Shoulder Plane $225.00 05P41-02 Repl. A2 blade suits 05P41-01 $51.00 05P43-01 Lg. Shoulder Plane $265.00 05P43-02 Repl. A2 blade suits 05P43-01 $51.00 Order no. Description Price 05P25-01 Low Angle Smoothing Plane $289.00 05P25-02 Repl. A2 Blade $44.00 Order no. Price 05P39-01 $309.00 Order no. Description Price 05P20-01 Flush Plane $51.00 05P20-02 Repl. Blade $30.00 Order no. Price A. 05P38-01 $215.00 A & B 05P38-20 $235.00 Order no. Description Price 05P38-50 Small Router Plane $67.00 05P38-51 Repl. blade $13.00 Order no. Description Price 05P44-01 Side Rabbet Plane $165.00 05P44-02 Repl. Blade Left $17.00 05P44-03 Repl. Blade Right $17.00 Order no. Description Price 05P45-01 Skew Rabbet Plane RH $319.00 05P45-02 Skew Rabbet Plane LH $319.00 05P45-52 Repl. blade left $51.00 05P45-51 Repl. blade right $51.00
  • 79. Handtools & Handplanes 77Want to see more? See our website for our full range of products. VERITAS® PLANE SACKS Made from a silicone-treated knit cotton that resists moisture, these sacks are ideal for plane storage. Sacks are blade in colour with the VERITAS® logo printed on them. VERITAS® LEFT HAND PLOW PLANE Closest in size to the classic Record #044 plane, the preferred size of the old-style plow planes, the Veritas small plow plane is ideal for quickly cutting grooves and rab- bets, such as on drawer and box bottoms and cabinet backs, and in frame and panel construction. The 6-5/8” (168mm) long fence registers solidly against the workpiece and is through-drilled to accommodate the addi- tion of a wooden fence extension. VERITAS® SMALL PLOW PLANE Closest in size to the classic Record #044 plane, the preferred size of the old style plow plane, the Veritas® small plow plane is ideal for quickly cutting grooves and rabbets, such as on drawer and box bottoms and cabinet backs, and in frame and panel construction. The 168mm long fence registers solidly to the workpiece and is through drilled to ac- commodate the addition of a wooden fence extension. The asymmetric fence grip has been sculpted to comfortably fit the natural curvatures of the hand. Double guide rods and a special collet locking system prevent the fence from racking. The large brass knobs make adjustments fast and easy without the need for tools; the fence can be offset from flush to 38mm from the 6.35mm blade. Best used in the direction of the grain, the plane comes with a 6.35mm wide lapped A2 tool steel blade; other blade widths (3.2, 4.76, 8 and 9.5mm) are available separately. VERITAS® JOINTER FENCE Planing a square edge on a board requires a jointer fence, whether you are using an elec- tric jointer or a hand plane. The Veritas jointer fence allows you to shoot accurate and con- sistent square or bevelled edges with all iron or steel bench planes. The integral rare-earth magnets make it quick and easy to attach or remove the 279mm long anodised alu- minium fence from either side of all sizes of bench plane, from a smoothing plane (#4) to a jointer (#7 or #8). As supplied, the 50mm tall guiding face can be used to plane edges perfectly square to the face of your work- piece. It can also be used to shoot angles less than 90° when a bevelled wooden guide is attached to the inside face of the fence. Patented. 342g. PLANE SCREWDRIVER A regular screwdriver just doesn’t work well on cap iron screws. A narrow blade can mar the cap-screw slot, and there’s always the risk that the screwdriver tip will slip out of the slot altogether. We designed this screwdriver to make it both safe and easy to remove, replace or adjust cap irons. It has a turned brass collar surrounding the tip to capture the head of a cap iron screw up to 21/32” in diameter, and a generous bubinga knob for a comfortable, secure grip. Not only for Veritas® planes, it fits all standard cap iron screws on current and vintage Record and Stanley planes as well. A. B. C. VERTICAL TOTES FOR VERITAS® LOW-ANGLE BLOCK PLANE While investigating the development of a #3 smoothing plane, we realised that our ex- isting low-angle block plane had the same base size and 12° bed angle. So, rather than offer an entirely new plane, we designed a vertical tote that, when coupled with a tall front knob, lets the low-angle block plane function as a #3 bevel-up smoothing plane. By adding high-angle blades in 38° and 50° bevels, you can use the plane to work difficult wood grains. The vertical tote provides a comfortable, firm grip for greater leverage and, with the tall knob, you can bear down quite heavily. Now Available Colin Clenton Tools Go to www.carbatec.com.au Order no. Size Price 05P61-07 7-1/2” $14.00 05P61-12 12-1/2” $15.00 05P61-16 16” $16.00 05P61-25 25” $17.00 Order no. Price 05P52-01 $265.00 Order no. Description Price 05P51-01 Small Plow Plane $265.00 05P51-02 Opt. 3.2mm A2 blade $25.00 05P51-03 Opt. 4.76mm A2 blade $41.00 05P51-04 Repl. Std 6.35mm A2 blade $25.00 05P51-05 Opt. 8mm A2 blade $25.00 05P51-06 Opt. 9.5mm A2 blade $25.00 05P51-10 Set of 4 Opt. blades $98.00 Order no. Price 50K39-01 $21.00 Order no. Description Price 05P30-01 Jointer Fence $51.00 05P37-05 Bevel-Up Jointer Fence $57.00 Order no. Description Price 05P22-04 A. Tall front knob $11.00 05P22-17 B. Small Tote $30.00 05P22-15 C. Large Tote $30.00
  • 80. Handtools & Handplanes 78 For more information & to shop online go to www.carbatec.com.au VERITAS® CHAMFER GUIDE You can convert our block plane into a cham- fer plane in seconds with this cunning new guide. Easy to install, you first set the chamfer width on the guide, then install the guide by unscrewing the front knob of the plane, replacing the toe piece with the chamfer guide and tightening the knob again. It is ready to go. Adjustable for cham- fers up to 1/2” wide, the guide wings are fixed at 90 degrees angle to hold the plane body at a consistent 45 degrees to the work face. Made of anodised aluminium. Patented. VERITAS® CHISEL PLANE Rabbet planes used to be widely available, but are now being discontinued by manufac- turers. We developed this specialised plane to convert a chisel into a rabbet plane. The body is made of ductile cast iron and is con- figured to hold a 1” bevel-edge chisel at a 45° angle, the same pitch as used on bench planes. It becomes a small plane that works equally well as a shoulder plane or rabbet plane and can be used to clean up machine- cut rabbets and tenons. It works like a butt mortise plane for cutting hinge gains. It will also cut 1” dadoes and grooves up to a depth of 3/8”. Precisely machined. Overall size is 1-3/8” wide by 5-1/2” long by 2-1/2” high. The clamping screw is solid brass. While it excels as a job-site plane, it is equally handy in the shop. 615g. VERITAS® SCRUB PLANE The scrub plane is the tool of choice for major stock removal, the first step when flattening rough stock by hand. Much like a low-angle smooth plane, a scrub is not usu- ally used parallel to the grain, but at an angle of 30° or more. The blade edge is ground with a 3” radius, so that it takes an aggres- sive cut. This is the tool you use to get stock into a condition where you then can use a smooth plane. The 3” radius of the 1-1/2” wide by 3/16” thick blade gives a distinc- tive, hand-worked texture to the workpiece. This is a single-iron tool, meaning there is no cap iron or chip breaker. Set screws along the side prevent the blade from shifting side- ways when knots are encountered. VERITAS® DETAIL RABBET PLANES These slender pocket-size planes allow fine, controlled cuts in areas you could ordinar- ily trim only with a chisel. With very narrow soles, they are also useful for cleaning da- dos or grooves. Available in five widths: 1/4”, 5/16” (8mm), 3/8”, 6mm and 10mm. VERITAS® SCRAPING PLANE This is the ideal tool for final smoothing, es- pecially when you have to deal with highly figured wood or reversing grain. Tearout is virtually eliminated with the cutting action of the included scraping blade. Blades are 2-7/8” wide and are hardened to Rc48-51. The sole of the plane is surface ground for accuracy. VERITAS® DETAIL PALM PLANES With a height-adjustable palm rest for better in-hand registration, these miniature planes are easily manoeuvred and permit fine, con- trolled cuts. The investment-cast steel body has a 45° bed angle and a fixed mouth, and uses a brass retention screw to secure the included 30° bevel A2 blade (0.06” thick by 9.5mm wide). The soles are approximately 38mm long by 15mm wide. A. B. C. D. VERITAS® IRON EDGE TRIMMING PLANE Edge-trimming planes work end grain or give final trimming cuts on jointed boards, for smooth edges exactly 90° to the face. This plane is cast in durable ductile iron for everyday use, and is available in right and left-hand models. 1-1/4” wide blade. VERITAS® SMALL SCRAPING PLANE Designed for one handed use, this small scraping plane has an articulated arm rest for a comfortable grip. The 2” wide, 0.040” thick, high carbon steel blade occupies the full width of the plane body permitting clean, accurate cutting. Order no. Price 05P22-10 $30.00 Order no. Price 05P21-01 $67.00 Order no. Description Price 05P75-03 1/4” Imperial $82.00 05P75-06 5/16” Imperial $82.00 05P75-08 3/8” Imperial $82.00 05P75-01 6mm Metric $82.00 05P75-10 10mm Metric $82.00 Order no. Size Price 05P90-01 A. Flat $75.00 05P90-13 B. Concave $75.00 05P90-05 C. Double Convex $75.00 05P90-09 D. Convex $75.00 Order no. Description Price 05P29-01 Scraping Plane $245.00 05P29-02 Repl. Blade $19.00 05P29-03 Opt. A2 blade $46.00 Order no. Description Price 05P03-01 Iron Edge Plane $144.00 05P03-02 Repl. blade $33.00 Order no. Price 05P29-50 $164.00 Order no. Description Price 05P35-01 Scrub Plane $154.00 05P35-05 Repl. blade $54.00
  • 81. Handtools & Handplanes 79Want to see more? See our website for our full range of products. IRWIN BENCH PLANES Irwin Record bench planes are divided into 3 types: Smoothing plane, (04) for smoothing and final finishing. Jack plane, (05) four inches longer than smoothing planes, are used for initial prepa- ration of rough timber. The long base, bridges the undulations a shorter plane would tend to follow. Jointer plane (07) is an extended Jack plane, where very long rough timber has to be prepared. A. B. C. IRWIN BLOCK PLANES The 060-1/2 has a screw adjusted cutter, be- ing pitched at 12-1/2°, is ideal for plastic lam- inates or wood. This plane is also furnished with an adjustable mouth; wide for coarse shavings, and narrow for fine shavings from awkward grain. The 09-1/2 completes the range, being fitted with an adjustable mouth and screw adjusted cutter, which has a lever adjustment for lateral alignment. Both planes have blades widths of 42mm. A. B. KUNZ COMPASS PLANE A practical way of giving a smooth finish to curved surfaces on window and door frames, in furniture making or boat building. The sole adjusts to convex or concave set- tings. Width: 44mm. 1.7kg. GROZ BLOCK PLANES Cast Iron body and lever cap for durability. Both planes have lateral adjustment levers. Ground bases for accuracy in use. Planes require final tuning before use. The 220N has a 178mm overall length, 41mm cutter idth and 21° blade angle. The 605N has a 157mm overall length, 35mm cutter width and 13° blade angle. GROZ #4 & 5 SMOOTHING PLANES Fully ground soles and sides, hardwood handles, ductile cast iron construction and tool steel blades. Planes require final tuning before use. #4 has a 245mm overall length, 62mm sole width and 50mm blade width. The #5 has 355mm overall length, 62mm sole width and 50mm blade width. GROZ #7 JOINTING PLANE Fitted with hardwood handles and brass knobs. 75mm wide x 560mm long. 4.2kg. Plane requires final tuning be- fore use. WOODWORKERS STARTER SET IN WOODEN BOX Set includes No. 4 (250mm) smoothing plane, low angle (175mm) block plane, 160mm bevel, 210mm brass inlaid mortise gauge and 280mm brass edged try square. Perfect for every beginner. Presented in wooden storage case. 4.6kg. A. KUNZ CAST IRON POCKET PLANE B. KUNZ BEAVER TAIL POCKET PLANE Plane length 85mm and cutter width 24mm for both. A. B. LEE VALLEY PALM PLANES These little beauties are made in Canada and are expertly cast and ground. The ‘Squir- rel Tail’ planes (A and B) are similar to the old Stanley #100 and #100-1/2. ‘A’ is a flat plane while ‘B’ is curved with a 1-1/2” radius side to side and a 12” radius front to back. These two are 3-3/8” wide with a 1” blade - a true pocket plane! A. B. C. Order no. Description Price IRW-04 A. #4 Smoother $169.00 IRW-05 B. #5 Jack $192.00 IRW-07 C. #7 Jointer $235.00 Order no. Description Price IRW-09-1/2 A. Standard Angle $169.00 IRW-060-1/2 B. Low Angle $169.00 Order no. Price KU-113 $419.00 Order no. Price CT-290115 $165.00 Order no. Price GZ-220N $55.00 GZ-605N $55.00 Order no. Description Price GZ-39701 #4 Bench Plane $55.00 GZ-39702 #5 Bench Plane $77.00 Order no. Price GZ-39704 $139.00 Order no. Description Price A 15P10-10 Flat ‘Squirrel Tail’ Block Plane $59.00 15P01-02 Repl. Flat Blade $16.00 B 15P01-01 Flat ‘Little Victor’ Block Plane $55.00 15P01-02 Repl. ‘Little Victor’ Blade $16.00 C 15P10-20 Curved ‘Squirrel Tail’ Block Plane $65.00 15P10-21 Repl. Curved Blade $23.00 Order no. Price A KU-101 $32.00 B KU-100 $32.00
  • 82. Handtools & Handplanes 80 For more information & to shop online go to www.carbatec.com.au VERITAS® CARBIDE BURNISHER We made this carbide burnisher specifically for curved scrapers and fine detail scrap- ers. The 1/8” diameter polished carbide rod projects 3/4” from the hardwood handle, ideal for one-handed use. 100g. VERITAS® SCRAPER HOLDER Scraper bow is adjusted by the centre brass knob. Takes the fatigue out of using straight scrapers. Suitable for push or pull action. 6” Scraper included. 250g. VERITAS® TRI-BURNISHER Designed to perform the functions of round, triangular, and oval burnishers, this one has a mirror finish to guarantee smooth hooks on scrapers. The unique shape lets you apply the right amount of pressure at each stage of the process. Hardened to Rc 62 - 64, the burnisher is much harder than the scrapers it is used on. 120g. VERITAS® VARIABLE BURNISHER Woodworkers have difficulty putting the optimum hook on a scraper for the job at hand. Our Variable Burnisher solves the problem and makes burnishing easy. The unit has a carbide rod in a brass hub at an angle. A dial on the face of the body lets you set any angle from 0° to 15°. 220g. VERITAS® CABINET SCRAPER Used in place of a much heavier belt sander, it can clean a dirty workbench top, remove dried glue an smooth a panel or tricky grain table top efficiently, leaving be- hind a surface free of tear-out, digs or goug- es. The blade is 2-3/4” wide with both edges ground at 45° so that the tool has two cutting edges prepared at once. The sole is surface ground for accuracy. IBEX VIOLIN MAKER’S PLANES Featuring curved & flat bottoms, preci- sion cast in silicone bronze. Body lengths of 25mm, 30mm, 36, 46 and 60mm with blade widths of 8mm, 10mm, 12mm, 18 and 22.5mm respectively. VERITAS® CHAIRMAKER’S SCRAPER While this chairmaker’s scraper was de- signed primarily for chairmakers’ use, it can be used for any other scraping task in the shop. The appeal of this tool is that it can be used as is for scraping flat surfaces with the included straight blade. For scraping round pieces, additional blades are available: 1/2” (12.7mm) concave, 7/8” (22.2mm) concave, 1-1/4” (31.7mm) concave, 1-1/2” (38mm) ra- dius convex. PURFLING CUTTER Solid brass and wood. Adjustable purfling cutter for manual rabbeting of guitar edges and purfling of violins. KUNZ #80 SCRAPER Overall width: 290mm, Sole width: 85mm, Sole length: 68mm. Blade can be curved by tightening the central wing nut. This avoids dig-ins on the edges of the blade. VERITAS® BALL JOINT SCRAPER For any major scraping task, nothing beats a ball joint scraper. The handle can be set anywhere in a 70° cone, allowing a comfort- able grip and effective blade orientation. Available with a carbide or high carbon steel (HCS) blade. The carbide blade is preferred for paint scraping and the HCS is preferred for finishing bare wood surfaces where maintenance of a finely formed edge is more significant. Order no. Size Price 50501 25mm, round base $86.00 50502 30mm, round base $86.00 50503 36mm, round base $93.00 50553 36mm, flat base $97.00 50504 46mm, round base $103.00 50505 60mm, flat base $125.00 Order no. Price 05K20-30 $11.00 Order no. Price 05K33-01 $51.00 Order no. Price 05K32-01 $48.00 Order no. Price 05K37-01 $50.00 Order no. Description Price 05P32-05 Cabinet Scraper $88.00 05P32-06 Repl. blade $8.00 Order no. Description Price 05P33-80 Chairmaker’s Scraper $72.00 05P33-81 Repl. Blade $12.00 05P33-82 1/2” Concave blade $12.00 05P33-83 7/8” Concave blade $12.00 05P33-84 1-1/4” Concave blade $12.00 05P33-85 1-1/2” Concave blade $12.00 05P33-88 Set of 4 blades $41.00 Order no. Price 5067 $72.00 Order no. Price KU-80 $52.00 Order no. Size Price 05K21-01 HCS Scraper $61.00 05K21-02 HCS Repl. Blade $13.00 05K21-07 HCS Blade Assembly $18.00 05K21-04 Carbide Scraper $72.00 05K21-06 Carbide Repl. Blade $11.00 05K21-05 Carbide Blade Assembly $28.00
  • 83. Handtools & Handplanes 81Want to see more? See our website for our full range of products. VERITAS® SPOKESHAVES Designed for smooth, effective, chatter free shaping of chair spindles, panel edges, pad- dles, tool handles, and all other kinds of free- hand shaping. All three spokeshaves have a 1/8” (0.125”) thick A2 tool steel blade, seat- ed at 45° to the sole. Each tool is 260mm long overall. VERITAS® SUPER HARD SCRAPER SET Most scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder - Rc48-52 - and hold an edge longer. They are also fully milled to a square, sharp 90° ready for immediate use on fine work. Two are 2” x 6”, two are 2-3/8” x 6”. VERITAS® SUPER HARD CURVED THREE PIECE SCRAPER SETS The concave/convex ends are excellent for bowl or spindle work while the flat is for gen- eral purpose jobs. Two thicknesses are avail- able: 0.6mm for regular scraping, 0.4mm for finer work. PAX CONVEX SCRAPER SET Made in Sheffield, this two piece set has 10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1-1/8”, 1-1/4” & 1-1/2” dia. PAX CONCAVE SCRAPER SET Made in Sheffield, this two piece set has 10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1-1/8”, 1-1/4” & 1-1/2” dia. VERITAS® LARGE SPOKESHAVE This large spokeshave provides all the utility of regular spokeshaves - a tight mouth, sim- ple blade depth adjustment and very precise machining - but in a larger more robust pack- age for quick controlled work. The integrated thumbwheels allow quick and repeatable blade depth and skew adjustment, and two shims are supplied to enable mouth opening adjustment to suit your work requirement. A. B. MARPLES SCRAPERS Made from high carbon steel. Available in two different sizes / profiles. Listed from left to right. VERITAS® CHAIR DEVILS Chair devils are wonderful for final shaping and smoothing of round parts such as chair spindles and posts. The specially shaped scraper blade rounds the workpiece, re- moving any spokeshave marks. Three sizes available: 1/2” (12.75mm) for spindles, 7/8” (22.25mm) for rungs and the 1-1/4” for legs and posts, as well as canoe paddle shafts. VERITAS® LOW ANGLE SPOKESHAVE This spokeshave has the same low cutting angle as spokeshaves of old, but cutting depth has been improved substan- tially. Instead of adjusting blade projection, the blade is fixed, forming the sole of the tool. The toe piece is adjustable to control the depth of cut. Used in one orientation, the toe piece is suited to convex and flat work. Flipped 180° the tool can be used on concave work. The ease of cutting and the ergonomically shaped body make this tool capable of much more precise work than the standard spokeshaves of today. 300g. Flat Sole Curved Sole IRWIN RECORD 10” SPOKESHAVES KUNZ SPOKESHAVES Order no. Price 05K30-10 $23.00 Order no. Description Price 05K20-10 0.6 thick $20.00 05K20-20 0.4 thick $20.00 Order no. Description Price A. PAX-CC Concave $26.00 B. PAX-CV Convex $26.00 Order no. Price 05P33-90 $129.00 Order no. Description Price 05P33-01 Flat Spokeshave $123.00 05P33-03 Round Spokeshave $123.00 05P33-11 Concave Spokeshave $123.00 05P33-05 Blade to suit flat & round $28.00 05P33-12 Blade to suit concave $41.00 Order no. Size Price IRW-M2452 Gooseneck $22.00 IRW-M2453 Curved $22.00 Order no. Size Price 05P33-50 1/2” Chair Devil $82.00 05P33-55 Repl. blade for 05P33-50 $15.00 05P33-51 7/8” Chair Devil $82.00 05P33-56 Repl. blade for 05P33-51 $15.00 05P33-52 1-1/4” Chair Devil $82.00 05P33-57 Repl. Blade for 05P33-52 $15.00 05P33-70 Straight Scraper Shave $82.00 05P33-71 Repl. Blade for 05P33-70 $13.00 Order no. Description Price 05P32-01 Low Angle Spokeshave $92.00 05P32-02 Repl. Blade $20.00 Order no. Type/Blade width Price IRW-A151 Flat, 60mm $64.00 IRW-A151R Curved, 60mm $64.00 Order no. Desc. Blade Width Price KU-50 Convex 52mm $44.00 KU-55 Concave 54mm $44.00 KU-63 Curved 45mm $27.00 KU-64 Flat 45mm $31.00 KU-51A Flat Face 52mm $35.00
  • 84. Sharpening 82 For more information & to shop online go to www.carbatec.com.au VERITAS® MK II SHARPENING SYSTEM The key to consistent, fast honing is repeatability - and this guide delivers it in spades. It will set bevel angles from 15° to 54° and a range of back bevels from 10° to 20°. It can accommodate chis- els as narrow as 1/4” and blades as wide as 2-7/8” and up to 1/2” thick. The registration jig slides onto the guide body, centring and squaring the blade with an integral fence. stone not incl. Guide body► ◄Registration Jig DIAMOND BLADE HONE Holds 400 and 600 grit diamond stones for sharpening HSS or tungsten carbide jointer and planer blades. VERITAS® CAMBER ROLLER ASSEMBLY The Veritas MK II honing guide has been designed to produce accurate and repeatable square bevels on chisel and plane blades. However, when using smoothing planes on large, flat surfaces, it is desirable to hone a camber into the blade edge. This allows the cut to taper out on each side. Simply replace the standard roller assembly with the camber assembly and hone. VERITAS® SKEW REGISTRATION JIG This jig locks into the MK II hon- ing guide to make quick work of setting both skew and bevel an- gles (left or right hand) of chisel and plane blades. The skew an- gle graduations cover the range of 10° to 45° in 5° increments, and there are additional marks (18°, 22°, 28°) to cover the angles of popular skew plane blades. The base has four distinct tracks providing four bevel angle set- tings: 20°, 25°, 30° and 35°. Attach jig to honing guide to set bevel and skew angles. VERITAS® BEVEL GAUGE Half the secret of sharpening is the control of blade geometry. Nothing is handier than a bevel gauge for quickly checking the grind angle of chisels, plane blades, turning tools, etc. The pocket-sized disc is 2-1/2” in diameter with a centre hole for hanging it on a nail. Made of sol- id brass, which will not damage a honed edge. 20g. VERITAS® BLADE HONING COMPOUND This compound is the most ef- fective on the market. Chromium oxide admixed with other fine abrasives gives the best combi- nation of cutting speed and fine, mirror finish with a light wax film. It will adhere well to felt, leather, or wood. 180g. DIAMOND DISC SHARPENER 50mm x 1mm disc with 400grit diamond surface on one side. Ideal for sharpening or deburring router bits, chisels. Fit- ted with 6mm shaft. Max. speed: 3,000rpm. 40g. HONING GUIDE Holds your chisel or plane iron in a vice like grip at any normal sharpening angle. Rolls on a hardened steel wheel. Holds irons from 2mm to 65mm. 260g. PLANE & CHISEL SHARPENING GUIDE Similar to honing guide shown elsewhere but, with heavy duty brass roller. Brass roller assem- bly is removable which allows this unit to be used on bench grinders equipped with mitre slots. Holds blades from 9.5 to 65mm. 300g. DRILL DOCTOR Professionally sharpens stand- ard twist drills from 2.5 to 13mm. Suitable for tungsten carbide, cobalt, high speed steel and tin coated drills. Powerful 240v mo- tor makes sharpening a breeze! Free video included with every kit. 1.66kg. HONING GUIDE FOR KITCHEN KNIVES This clever but simple device rigidly holds your knife at the same repeatable angle ensuring perfect honing every time. Stone & knife not incl. CERAMIC SHARPENING STONES Ceramic stones are valued for their durability and the very keen edge they give in the finer grits. These two stones are ideal for carvers who do all their sharp- ening free hand and can quickly wear grooves in water stones. (A) is about 800 grit and used for edge shaping. (B) is about 8000 grit and is used for final hon- ing. Both are 4” x 2” x 1/2”. The manufacturer states that neither requires lubrication and that both clean up quickly with soap and water. Made in USA. A. B. PFEIL ARKANSAS SLIP STONES Complete set of four slip stones in various shapes, suitable for all carving chisels, gouges. Used with honing oil. 175g. PFEIL FLAT ARKANSAS STONE Approximate size: 125 x 50mm. Used with honing oil. PFEIL ARKANSAS LARGE SLIP STONE Large Pfeil Arkansas slip stone, suitable for most carving chisels, gouges, vee chisels, etc. Stone is approximately 100mm long. Use with honing oil. Order no. Price 05M09-01 $88.00 Order no. Price K-10-D $41.00 Order no. Price 05M09-05 $31.00 Order no. Price 05M09-03 $41.00 Order no. Price 50K09-01 $13.00 Order no. Price 05M08-01 $15.00 Order no. Price DWG-1 $31.00 Order no. Price MJ-817 $13.00 Order no. Price CSG-21 $19.00 Order no. Price DD360X $179.00 Order no. Price KS-36004 $20.00 Order no. Grit Price A 60M21-01 800 $51.00 B 60M21-02 8000 $51.00 Order no. Price PF-ARK-SET $91.00 Order no. Price PF-ARK-HOHL $50.00 Order no. Price PF-ARK $93.00
  • 85. Sharpening 83Want to see more? See our website for our full range of products. JAPANESE WATERSTONES A. FORMED WHETSTONES Concave forms. Ideal for honing carving chisels. Also included is one double sided convex slip stone for inside gouges, etc. TRADITIONAL WATER SLIP STONES These slip stones are made to our design and to a specified hard- ness to best combine cutting speed and durability. Widely used for sharpening firmer gouges, scribing gouges, carving tools and radi- used blades, these stones can be used on nearly any curved cutting edge of simple or compound shape. Available in 3 grit sizes A. A. B. C. D. DIAMOND FILE SET Set of 10 files, supplied in plastic sheath. Length: 160mm, 210g. DIAMOND DRESSER 1/2 carat industrial diamond, 150mm in length. Ideal for dressing grinding wheels so they run true. 175g. GRANITE SURFACE PLATE Measuring 300 x 230 x 50mm with 0.0001” accuracy. Perfect for lapping of tools or checking setups on small engineering projects. VERITAS® LAPPING KIT Silicon carbide is ideal for flat- tening oil, water stones, plane bottoms and blades.Sprinkle the grit on a piece of glass or a steel lapping plate, add oil or water (as required), and lap the item flat. This easy process lets you keep all of your stones dead flat. Kit includes five 2 oz containers of 90x, 180x, 280x, 400x and 600x and instructions. 365g. VERITAS® STONE POND The complete system to store, use, and maintain water stones up to 12” long. Stones can be stored, ready for use, in a stand that clamps them and provides a base for lap- ping. There is ample space for three stones. The lapping sys- tem is a glass plate, a sheet of PSA-backed plastic laminate, and 90x silicon carbide. 2.1kg. VERITAS® LAPPING PLATE Measuring 12” x 4-1/8” x 1-1/8” high and weighing ap- proximately 6kg, this is one substantial lapping plate! Made from an iron chosen for its dimensional stability and consistency the bottom and sides are machined, and the top is ground flat to with-in 0.001” over the surface. DELUXE WATERSTONE HOLDER Will hold waterstones up to 210mm long. Rubber blocks on each end hold the waterstone securely without risk of breakage. They also act as a non-skid surface on your workbench. Order no. Price GSP-1 $62.00 Order no. Description Price PWS-1000 1000 grit (set of 2) $39.00 PWS-4000 4000 grit (set of 2) $39.00 Order no. Description Price B. 60M90-01 Fastest cutting and is used for establishing a basic edge, 1000grit, 95g $19.00 C. 60M90-02 Most useful combination of cutting speed, hardness, and degree of finish obtained. It cuts quickly, but still leaves a tool with a near-mirror finish superior to that achieved with a hard Arkansas slip. 4000grit, 95g $21.00 D. 60M90-03 For final touch-up or occasional stropping while carving. 8000grit, 95g $37.00 Order no. Price DF-10 $20.00 Order no. Price CT-120110 $22.00 Order no. Grit Use Price WS-300 300 For fast material removal. Great for restoring old chisels. 207x66mm. $39.00 WS-800 800 Very useful for taking out nicks or changing bevels. 207x66mm $39.00 WS-1200 1200 Perfect for initial bevel grinding prior to finishing. 207x66mm. $39.00 WS-4000 4000 Gives a very sharp finish on all tools. 177x50mm $39.00 WS-6000 6000 For a razor sharp polished finish. 185x63mm. $43.00 WS-8000 8000 For a mirror finish edge, nagura stone incl.210x73mm. $129.00 WS-10000 10000 Used for mirror polishing, nagura stone incl. 205x76mm. $141.00 WS-16000 1000 /6000 1000 grit for grinding out imperfections, and 6000 grit for razor sharp finish. Double sided. $76.00 NGS-1 For cleaning ingrained surface scum from ws. 72x23x19mm. $14.00 WSF-150 For flattening waterstones that have become ’dished’ after prolonged use. Measures 150 x 50 x 27mm. $26.00 Order no. Price 05M01-01 $36.00 Order no. Price 05M20-06 $88.00 Order no. Description Price 05M20-20 Lapping Plate $113.00 05M20-07 90# Lapping Grit $7.00 05M01-04 180# Lapping Grit $7.00 05M01-05 280# Lapping Grit $7.00 05M01-06 400# Lapping Grit $7.00 05M01-07 600# Lapping Grit $9.00 Order no. Price 3854-100 $21.00
  • 86. Sharpening 84 For more information & to shop online go to www.carbatec.com.au DMT® DIA-SHARPTM Sharpening stones have a continuous diamond sur- face bonded to solid steel in a unique electro- plating process that quickly puts a razor edge on tools. DMT® HANDLED DIA-SHARPSTM With overall length of 180mm, these very sturdy sharpening stones have been moulded onto the plastic handle not glued like inferior competitors. Size: 63 x 19mm. MINI WHETSTONE 70 x 25mm, small and easy to carry. Excellent for router bits and turning tools. 20g each. FOLDING FLAT FILE Tapers from 6-19mm, 110mm long. TAPERED SHARPENER 100mm long cone tapering from 3-9mm. Ideal for carving and turning gouges, tool- making, etc. 600 grit. 110g. DOUBLE SIDED FOLDING WHETSTONE Diamond sharpener with two grits. 23 x 110mm. One on each side. SINGLE SIDED FOLDING WHETSTONE Size: 23 x 110mm DMT® 6” COUNTERTOP WHETSTONE Choice of four grits, 1200 extra fine, 600, fine, 325 coarse and 220 extra coarse. Size: 152 x 50mm. 300g. DMT® 10” DUOSHARP STONES Size: 203 x 67mm. Base not included. DMT® 8” DUOSHARP PLUS WITH BASE This 8” version of the Duosharp has the added advantage of a continuous diamond section at one end for sharp pointed tools. Also included at no cost is the DuoBase with non-slip feet. Size: 203 x 67mm. 8” DUOSHARP PLUS WITHOUT BASE DMT® 10” & 12” DIAMOND STEELS Restoring a cutting edge in minutes. This su- perb tool not only straightens but sharpens knives. DMT® DOUBLE SIDED DIA-SHARPTM Combines two grits in the same stone. Fast and easy way to sharpen any tool. Size: 150x50mm DMT® WAVE Combined convex and concave abrasive surfaces. Affords long sharpening strokes provid- ing 1.59mm radii tapering to 25mm radi accommodating all curved gouges. Order no. Grit Price Size: 83 x 51 x 1.2mm DMT-D3E Extra Fine $16.00 DMT-D3F Fine $16.00 DMT-D3C Coarse $16.00 Size: 101 x 22 x 5mm DMT-D4E Extra Fine $16.00 DMT-D4F Fine $16.00 DMT-D4C Coarse $16.00 Size: 151 x 51 x 6mm DMT-D6E Extra Fine $37.00 DMT-D6F Fine $37.00 DMT-D6C Coarse $37.00 DMT-D6X X-Coarse $37.00 Size: 203 x 76 x 9.5mm DMT-D8EE XX-Fine $102.00 DMT-D8E X-Fine $67.00 DMT-D8F Fine $67.00 DMT-D8C Coarse $67.00 DMT-D8X X-Coarse $67.00 DMT-D8XX X X-Coarse $102.00 Order no. Grit Price DMT-D2E Extra Fine $11.00 DMT-D2F Fine $11.00 DMT-D2C Coarse $11.00 Order no. Grit Price DMT-W7E Extra Fine $11.00 DMT-W7F Fine $11.00 DMT-W7C Coarse $11.00 Order no. Grit Price DMT-FFF Fine $34.00 DMT-FFC Coarse $34.00 Order no. Price DMT-DCSFH $33.00 Order no. Grit Price DMT-FWFC Fine/Coarse $47.00 DMT-FWEF X Fine/Fine $47.00 Order no. Grit Price DMT-FWE X-Fine $30.00 DMT-FWF Fine $30.00 DMT-FWC Coarse $30.00 DMT-FWX X-Coarse $30.00 Order no. Grit Price DMT-W6XP X-Coarse $51.00 DMT-W6CP Coarse $51.00 DMT-W6FP Fine $51.00 DMT-W6EP X-Fine $51.00 Order no. Grit Price DMT-W250CXNB Crse/Xcrse $165.00 DMT-W250FCNB Fine/Crse $165.00 DMT-W250EFNB Xfine/Fine $165.00 DMT-W250ECNB XFine/Crse $165.00 Order no. Grit Price DMT-WM8FC-WB Fine/Coarse $145.00 DMT-WM8EF-WB X-Fine/Fine $145.00 Order no. Grit Price DMT-WM8CX Coarse/X-Coarse $92.00 DMT-WM8FC Fine/Coarse $92.00 DMT-WM8EF X-Fine-Fine $92.00 Order no. Size/Grit Price DMT-DS0F 10”/Fine $41.00 DMT-DS2F 12”/X-Fine $44.00 Order no. Size/Grit Price DMT-D6CX X-Coarse/Coarse $61.00 DMT-D6FC Coarse/Fine $61.00 DMT-D6EF Fine/X-Fine $61.00 DMT-D6FX Fine/X-Coarse $61.00 Order no. Grit Price DMT-WAV-E X-Fine $67.00 DMT-WAV-F Fine $67.00
  • 87. Sharpening 85Want to see more? See our website for our full range of products. TORMEK SHARPENING SYSTEMS The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs-you remove only a minute fraction of the steel at each sharpening, which makes it fast. You can shape the tool exactly to your needs. Even such complicated shapes as fin- gernail turning gouges, spoon carving gouges and oval skew chis- els with a radiused edge are easily sharpened. The Tormek method is safe and sharpening at low speed means you are in total control. Since 1973 Tormek has introduced many new techniques and set the standard in water cooled sharpening. Tormek is dedicated to sharpening and are continuously working on new developments to satisfy all your sharpening needs. Buying a Tormek is a safe invest- ment in quality and performance. Specifications TOR-T3 TOR-T7 Housing ABS Plastic Welded Steel Grindstone 200 x 40mm 250 x 50mm Leather Honing Wheel 145 x 26mm 220 x 31mm Main Shaft in stainless steel Yes Yes Motor 615x620mm 200 W Duty Cycle 30 min/hour Continuous Running Speed 120rpm 90rpm Gross Weight 9.1kg 16.7kg Warranty 7 years 10 years TORMEK ACCESSORIES * Denotes items included in TOR-TNT-708 ^ Denotes items included in TOR-HTK-705 7 10 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 26. 27. TORMEK ACCESSORIES 21. 22. 23. 24. 25. 19. 20. Order no. Price TOR-T3 $599.00 TOR-T7 $899.00 Order no. Description Price 1. TOR-SVH-320 Planer Blade Jig $262.00 2. TOR-WM-200 Angle Master $27.00 3. TOR-SVX-150 Scissor Jig ^ $69.00 4. TOR-SVS-32 Short Tool Jig ^ $37.00 5. TOR-LA-120 Leather Profile Hone * $73.00 6. TOR-SVD-110 Tool Rest * $42.00 7. TOR-SVS-50 Multi Jig * $90.00 8. TOR-SVD-185 Thumbnail Jig * $115.00 9. TOR-SVM-140 Long Knife Jig ^ $73.00 10. TOR-SVM-45 Knife Jig ^ $50.00 11. TOR-SP-650 Stone Grader $37.00 12. TOR-TTS-100 Turning Tool Setter * $37.00 13. TOR-SVA-170 Axe Jig ^ $20.00 14. TOR-SE-76 Square Edge Jig $81.00 15. TOR-TT-50 Truing Tool $111.00 16. TOR-SVP-80 Spindle Moulder Knife Jig $262.00 17. TOR-BGM-100 Bench Grinder Jig $121.00 18. TOR-DBS-22 Drill Bit Att. $365.00 19. TOR-TNT-300 Turners’ Book * $73.00 20. TOR-MH-380 Machine Cover * $33.00 21. TOR-PA-70 Honing Paste $12.00 22. TOR-SB-250 Blackstone Silicone $310.00 23. TOR-SG-200 Supergrind Wheel $157.00 24 TOR-SG-250 Repl. wheel for T7 $283.00 25 TOR-SJ-250 Jap Waterstone -T7 $493.00 26. TOR-HTK-705 Handtool Kit ^Inc $225.00 27. TOR-TNT-708 Turner’s Kit * Inc $409.00
  • 88. Sharpening 86 For more information & to shop online go to www.carbatec.com.au CARBA-TEC® WIDE STONE GRINDER Excellent value for money. Great for clean- ing up an edge on most woodworking and general household tools, with a wheel wide enough for carving and turning tools. We’ve also included an LED light and two toolrests. 9kg. Specifications: 230v, 200w, 2800rpm approx. Grinding wheels both 6” in diameter, 1 x 20mm and 1 x 40mm wide aluminium ox- ide. CREUSEN POWERLINETM 8” HIGH SPEED DOUBLE GRINDER This sturdy bench grinder is suited for heavi- er work and fitted with a very powerful 600W motor and 200mm diameter by 25mm wide stones. PFEIL LEATHER STROP Premium fine calf leather mounted on a wooden block. FLEXCUTTM SLIPSTROP KIT This wooden form has been specially profiled to allow for pol- ishing and de- burring the hard to reach areas on the inside of V-tools and gouges. Kit quick- ly pol- ishes all hardened steels. 130g. FLEXCUTTM GOLDTM POLISHING COMPOUND Specially formulated to apply like a crayon. Its blend of aluminium and titanium oxide provide a balance between aggressive re- moval of hardened tool steel and offering a high-colour polish. 130g. Specifications Voltage 230v, 50-60Hz Power 600w Speed 2800rpm approx. Grinding Wheel 200 x 25 x 15mm Specifications Voltage 230v, 50-60Hz Power 350w Speed 2800rpm approx. Grinding Wheel 150 x 40 x 15mm CREUSEN POWERLINETM 6” HIGH SPEED DOUBLE GRINDER This is the most popular Creusen grinder and great for just about any workshop activ- ity. On one side is a generous 40mm wide aluminium oxide stone and on the other a 20mm coarse grey aluminium oxide stone for general grinding. B. A. FLAT FELT BUFFING WHEELS The finest edge you can get on any tool is with a hard felt wheel. When dressed with blade honing compound, the edge is notice- ably sharper than most razor blades. A me- dium felt wheel is still very firm, but is more suitable for carving tools. SHAPED FELT WHEEL FOR CARVING TOOLS A constant problem for carvers is honing the inside of gouges, parting, and vee tools. This felt wheel not only has the right shape for such work, but because it is extra hard, it will hold that shape. 150mm in diameter, 22mm thick, 5/8” hole with 1/2” bushing. 360g. VERITAS® GRINDER TOOL REST A weakness of most bench grinders is that the tool rests are virtually useless. It is near- ly impossible to find one that is solid and square. This tool rest can be used with 6” or 8” utility bench grinders and many belt sand- ers/grinders. It mounts directly to the bench in front of the grinder and can be readily fold- ed out of the way for freehand grinding. The 4” wide table straddles wheels up to 1” wide. It is grooved for sliding jigs and center drilled for rotating jigs. The slotted arms allow a wide range of angular and height adjust- ments. Included is an angle-setting gauge to set the table to the common bevel angles of 20°, 25°, 30° and 35°.510g. B. SKEW GRINDING JIG This jig allows you to grind a radius rather than a straight 20° skew. The radius is deter- mined by the amount the tool projects from the jig. 175g. C. STRAIGHT GRINDING JIG For straight grinding. Will fit directly to the grinder tool rest shown above or will fit on any grinders tool rest with an edge parallel to the grinding wheel surface. Used for straight or 30° bevels. CARBA-TEC® CHISEL GRINDING JIG For grinding a wide range of tools. Ideal for woodturning gouges, scrapers, parting tools, and chisels (the adjustable quadrant posi- tions the tool, eg skew chisel at the correct angle). Helps produce a hollow ground bevel which can be honed to a razor sharpness. B. C. Order no. Price CT-WSG $105.00 Order no. Description Price A. PF-ST-R1 120mm long $41.00 B. PF-ST-R2 Double Sided 150mm $72.00 Order no. Price FLX-PW-12 $20.00 Order no. Price FLX-PW-11 $12.00 Order no. Price CG-DS7200T $249.00 Order no. Price CG-DS7150TS $209.00 Order no. Description Price 08M40-01 6” x 1/2”, Medium $25.00 08M40-03 6” x 3/4”, Medium $39.00 08M40-05 6” x 1”, Medium $44.00 08M41-03 6” x 3/4”, Hard $44.00 08M41-05 6” x 1”, Hard $51.00 Order no. Price 08M42-03 $88.00 Order no. Price 05M23-01 $67.00 Order no. Price 05N13-01 $37.00 Order no. Price 05M06-01 $33.00 Order no. Price CJ-04 $39.00
  • 89. Clamping, Vices & Benches 87Want to see more? See our website for our full range of products. VERITAS® INSET VISE This low-profile vise is similar to a wagon vise in function, but in a compact, self-contained form for easy installation in a work surface, adding a permanent, adjustable dog right where it’s needed. Designed to hold work between its single jaw and an external stop such as a bench dog, it has a clamping ca- pacity that is limited only by the size and dog- hole spacing of your work surface. 101.6 (4”) range of travel. 1.17kg. Basic Workbench Optional Cabinet PROFESSIONAL WORKBENCH This European made workbench has all the classic features: tail vise, front vise, 40mm thick work surface and rear tool well. These all combine to give you a solid, sturdy work area for planing, paring and clamping. An- other excellent feature of this bench is that you can start with the basic bench shown above with drawer and add the cabinet at a later time as an upgrade. Sold separately. CARBA-TEC® HEIGHT ADJUSTABLE WORKBENCH The latest addition to our quality workbench range. This heavy duty laminated solid oak workbench features a solid 25mm thick work top, double thick front, back and sides, and heavy duty height adjustable steel legs. This great bench suits all woodworkers...short and tall. Quality vise hardware and powder coated shelf and leg assembly add to the quality and presentation of this fine bench. VERITAS® QUICK-RELEASE FRONT VISE Using the same quick release mechanism as our tail vise, our front vise has a simple on-off cam lever to engage or disengage the Acme threaded screw, allowing it to apply up to 180kg of force in either clamping or spread- ing applications. The screw mechanism pro- vides 310mm of overall travel (less the thick- ness of your wooden jaw and bench apron). The vise requires an unobstructed mounting area on the underside of the bench top at least 300mm wide by 405mm deep (with a 50mm thick bench apron and a 44mm thick jaw). Made in Canada. VERITAS® QUICK- RELEASE SLIDING TAIL VISE Quickly incorporated into a new bench con- struction or easily retrofitted to an existing bench without major surgery. The end plates are symmetrical, so you can install the T- handle and quick-release lever in a right- or left-handed orientation, allowing the vise to be mounted at either end of the bench. VERITAS® TWIN SCREW VISE The only non-racking full width end vise on the market. Clamp anything anywhere in the vise, the jaws stay parallel. The chain drive ensures parallelism and eliminates racking. A spring-loaded pin lets you disengage the chain for controlled skewing. Enough chain is included for benches up to 32” wide. In- stallation hardware & mounting instructions included. Wooden jaws not included. A. VERITAS® HOLD-DOWN Clamps workpiece to a bench or anywhere a 19mm hole can be drilled. The long, low profile arm is unobstructed at the clamping end, allowing good access to work from all sides. The 254mm hold-down post gives you 203mm of clamping capacity, matching the 203mm throat capacity. An accessory post of 139.7mm is also available as an option. 1.37kg. B & C. ROUND BENCH DOGS Good dogs make a bench far more func- tional. These bench dogs are made from solid-brass rod and can be installed in any bench by drilling a 19mm hole. The com- bined cross-hatching and 2° inward slope of the dog face hold wood very securely. A side spring holds the dog at any desired projec- tion. The 111mm Bench Dogs are standard length. The Bench Pups (at 60mm) are fine for benches with tops up to 38mm thick. Sold in pairs. D. BENCH DOG & PUP MUZZLES These slip resistant covers slide over bench dogs (or pups) to give you a non-marring surface that will hold firmly. Sold in pairs. A. B & C. D. E. F. E. WONDER DOG With a 19mm shank and 6” long, these dogs can be used anywhere you can drill a 3/4” hole. The swivel handle combined with the fine screw lets you apply ample clamping pressure in any position. 640g. F. WONDER PUP The same in all respects as the Wonder Dogs except that the post is shorter (70mm). The side spring is replaced with an O-ring. 400g. Order no. Price WB-6030 $799.00 Order no. Price 05G30-01 $350.00 Order no. Description Price 05G31-01 Inset Vise $102.00 05G31-03 Opt. Pivot Jaw $17.00 Order no. Description Price CTW-45 Workbench $1,359.00 CTW-CAB Opt. Cabinet $315.00 Order no. Price 05G34-01 $410.00 Order no. Price 05G12-26 $319.00 Order no. Description Price 05G14-01 A. Holddown $102.00 05G14-02 accsy post 139.7mm $13.00 05G04-02 B. Bench Dog $39.00 05G04-04 C. Bench Pups $30.00 05G04-10 D. Bench Dog Muzzle $7.00 05G04-06 D. Bench Pups Muzzle $6.00 05G10-01 E. Wonder Dog $51.00 05G10-02 F. Wonder Pup $47.00
  • 90. Clamping, Vices & Benches 88 For more information & to shop online go to www.carbatec.com.au GROZ HEAVY DUTY CLAMP HEADS A bar clamp of any length can be made by using a piece of timber 25mm thick. The timber is then drilled with holes, producing a light duty bar cramp as strong and as true as the timber chosen. These clamp heads also feature a fixed jaw that is slightly angled inward to promote even clamping. PIPE CLAMPS Make your own clamps with these handy but reliable fittings. All you need is a piece of 3/4” threaded pipe, cut to a desired length for the job. 1kg. DOUBLE PANEL CLAMP KIT Eliminates buckling during board jointing by applying pressure in both horizontal and vertical directions. Suitable for projects up to 85mm thick. Maximum width is determined by length of 50mm x 50mm wooden beams (not included). Double panel clamps are sold individually, two or more are usually required for most projects. 1.71kg. VERITAS® PANEL CLAMP SET Bowed panels, a thing of the past? Easy to use, tightens by hand, stackable for produc- tion work. Best of all, makes double clamp bars of any length to suit your own needs. The serrated posts grip the bars, keeping a panel flat under any pressure load without al- lowing the bars to lift. Bars can be made by drilling 3/4 ” diameter holes in 4 x 2’s allow- ing you to stack panels, since there is room for the top of one post and the bottom of another in the same hole. Clamp any thick- ness from 5/8” to 2” with the clamp pads dead centre on the stock. The screw has 5” of travel. Wood not included. 720g. VERITAS® SURFACE CLAMP This fast-acting clamp can be used anywhere you can drill a 19mm diameter hole. The post has a wedging mechanism that anchors it firmly in material as thin as 5/8” (15.9mm) - depending on the strength of material. This makes it ideal for use with jigs and fixtures such as sliding tables for saws. The clamp arm can grip anything from veneer to mate- rial up to 3-3/4” (95.2mm) thick. SURE-FOOT PLUSTM 3/4” PIPE CLAMP New and improved design features 2-1/4” high jaws — a half inch higher than stand- ard pipe clamps! Extra-wide 2-1/2” foot pro- vides exceptional stability and prevents tip- over during setup. It won’t rock on uneven bench surfaces! Higher base raises the pipe 1-1/2” above table to allow for greater han- dle clearance, so you won’t have to position clamp handle off the edge of a bench. GROZ T-BAR & SASH CLAMPS Quality clamps for any job. SURE FOOTTM 36” ALUMINIUM BAR CLAMP Extra wide 2-1/2” foot for exceptional stability. Higher base that raises the bar 1-1/2” above the table for excellent handle clearance. Built-in clamp hook locks onto a 3/4” board eliminating the need to “clamp the clamp” when hanging on a wall. ROCKLER DELUXE RATCHETING BAND CLAMP Stitched band eliminates fraying and is crimped to the clamp so it won’t come loose when you’re clamping tight. Permanently at- tached wrench will always be ready for use. Rugged 1”Wx10’L (25.4mmx3m) nylon band is rated for loads up to 453kg. Selflocking cam guarantees a positive hold and instant release. Box joint cauls not included. ROCKLER BOX JOINT CAULS COMPLETE SET OF 3 SIZES X 4. Uniformly spaced pressure points clamp individual box joint fingers at the corners to give you the tightest joints possible. Plastic cauls stand 6-1/4” (1/4” Cauls), 6-3/8” (3/8” Cauls) and 6-1/2” (1/2” Cauls) tall. Four Cauls only per pack. Patent pending. IRWIN SASH CLAMPS IRWIN T-BAR CLAMPS Order no. Price PIPE-19 $17.00 Order no. Price YF-00101 $44.00 Order no. Price 05G16-01 $61.00 Order no. Price GZ-2525 $34.00 Order no. Price 05G19-01 $90.00 Order no. Description Price RK-30921 Pipe Clamp $30.00 RK-39897 Clamp Pads 4pk $7.00 Order no. Description Price GZ-39100 T-Bar 900mm $59.00 GZ-39101 T-Bar 1200mm $62.00 GZ-39102 T-Bar 1500mm $67.00 GZ-39103 T-Bar 1800mm $75.00 Order no. Price RK-41815 $61.00 Order no. Price RK-41419 $20.00 Order no. Price RK-42784 $41.00 Order no. Capacity Price IRW-136-5 1070mm $134.00 IRW-136-6 1220mm $144.00 IRW-136-7 1370mm $145.00 IRW-136-9 1680mm $158.00 IRW-136-11 1980mm $174.00 Order no. Capacity Price IRW-135-2 610mm $64.00 IRW-135-3 760mm $64.00 IRW-135-4 916mm $66.00 IRW-135-5 1070mm $69.00 IRW-135-6 1220mm $70.00
  • 91. Clamping, Vices & Benches 89Want to see more? See our website for our full range of products. THREE-WAY EDGING CLAMP Capacity 65mm, load 32kg. For gluing edge banding etc. Weight 950g. Sold as pair. GROZ QUALITY G CLAMPS GROZ QUICK RELEASE VISES Simply pressing the trig- ger initiates the quick action, with the front jaw slid- ing freely. Releasing the trigger returns the mechanism to normal for fine adjustment. A very useful feature in repetitive work situa- tions. Jaw opening capacity for 175mm vise is 200mm and 250mm for the 225mm vise. LARGE FRONT VISE 10-1/2” x 21” overall with a 1-1/8” diameter screw, and 13” clamping capacity less front jaw thickness. It can be added to an existing bench or built into an new one. BENCH STOP Mounts flush with bench surface. Simply turn a screw and the jaw raises and locks in posi- tion. Ideal for planing and sanding. 80g. GROZ PLAIN SCREW WOODWORKING VISE Manufactured from close-grained grey cast iron for long years of service. Accurately ma- chined housing assure smooth sliding move- ment. Solid steel guide rods reduce wear and tear giving the vises a smooth and true parallel action, free of side or cross deflec- tion. Jaw width is 175mm. 200mm capacity. GROZ 150MM CLAMP ON VISE A useful, lightweight vise for the young woodworker or home handyman. The design allows for two clamping options. Permanent clamping on the work- bench is available via bolt slots in the vise base or via the 55mm integrated clamp. Opening capacity: 120mm. 3.3kg. PARROT VISE Built like a machinist’s vise, the Parrot vise in- corporates a unique tightening cam that lets it pivot freely through 360° until you tighten the jaws firmly, locking the vise in place. This allows you to back off the clamp screw just enough to rotate the vise for access to any part of a work piece without releasing it from the jaws. 89mm wide cast iron jaws open to 120mm. There is a 44mm square machined anvil just behind the jaws. 4kg. TWO WAY CROSS SLIDE VISE Secures workpiece firmly and accurately on the drill press table. Positive positioning in two coordinates, lets you move the piece accurately. These controls provide precise adjustment for a myriad of drilling and cut- ting. Jaw width 103mm, Jaw opens 95mm. Weight: 10kg. KREG® KLAMP VISE The Klamp Vise™ can be connected to almost any workbench providing over 158kg of clamping power. Vertical clamping, side- ways clamping, vise-style clamping, routing, sanding, sawing, and a whole lot more. HANDSCREW CLAMPS Classic cabinet makers bench clamps with wooden jaws that won’t mark your work or slip. MACHINIST-STYLE CLAMPS Using the same principles as a woodwork- ing handscrew, these steel clamps are ideal for clamping small assemblies. The 1-1/2” long jaws have a 1” opening capacity. The clamps are most commonly used for finicky problems such as holding wire assemblies for soldering or for repairing a veneer chip in a table apron. Order no. Description Price GZ-39007 175mm $110.00 GZ-39009 225mm $176.00 Order no. Price GZ-39001 $88.00 Order no. Price GZ-39006 $51.00 Order no. Price PARROT-VISE $143.00 Order no. Price CSV-4 $88.00 Order no. Price MJ-815 $16.00 Order no. Price JEC-65 $18.00 Order no. Cap. Weight Price GZ-35802 150mm 1.25kg $18.00 GZ-35803 200mm 1.5kg $27.00 Order no. Price CTV-2038 $83.00 Order no. Price KR-KKS1060 $85.00 Order no. Description Price HSC-4 50mm Throat $11.00 HSC-6 75mm Throat $15.00 HSC-8 115mm Throat $19.00 HSC-10 135mm Throat $20.00 Order no. Price 09A01-94 $13.00
  • 92. Clamping, Vices & Benches 90 For more information & to shop online go to www.carbatec.com.au PROGRIPTM PANEL GUIDE The ideal solution for guiding routers, circu- lar saws, jigsaws, etc when machining large or small panels. The extruded aluminium rail is fitted with a 3-stage cam clamp fixed at one end and a moveable foot at the other. The extrusion incorporates the use of a T-bolt slot on both sides to allow the use of cus- tom made jigs, etc. Unit clamping capacity is 2.5m, perfect for trimming sheet material or plywood on site. Due to its length this prod- uct can only be shipped by road freight. 6kg. PROGRIPTM SYSTEM ProGrip™ is a comprehensive system for guiding power tools such as routers and cir- cular saws, etc. The extruded aluminium rail is fitted with a 3-stage cam clamp fixed at one end and a moveable foot at the other. The extrusion incorporates a T-bolt slot on both sides to allow the use of custom made jigs, etc. These slots also accept UHMW ny- lon router and saw bases. Also incorporated in the centre of the extrusion is a sliding met- ric and imperial scale. ProGrip’s™ secondary use is clamping jobs requiring low to medi- um clamping pressure. VERITAS® SPEED FRAME CLAMP The fastest adjusting frame clamp on the market. The four clamping nuts are designed to let you make fast adjustments. They are cross drilled to slide easily until they come up against a corner clamp; then their threads engage. To release, just back them off a turn and they slide again. The corners are accurate extrusions with a machinists inside corner and provide a glue gullet. Kit includes extensions as shown giving a maximum ca- pacity of 44” square or 65” x 23” rectangle. 1.24kg. EXTERNAL MITRE CLAMP A truly versatile clamp with a unique swivel head, enabling the woodworker to clamp wood of even or uneven thicknesses at 90° for T joints, L joints, mitre joints. 1.10kg. Sold individually. HEAVY DUTY PRO FRAMERS CLAMP Solid aluminium. Capacity min. 67mm square to max. 915mm square or equivalent in rectangular or round. Suitable for framing or furniture con- struction, etc. 1.2kg. INTERNAL MITRE CLAMP Similar to the TV-286, this clamp is heavy duty and designed for internal clamp- ing situations. This clamp is also suitable for mounting directly onto a workbench or jig. 1.20kg. Sold individually HEAVY DUTY PRO FRAMERS CLAMP Solid aluminium. Capacity min. 67mm square to max. 915mm square or equivalent in rectangular or round. Now fitted with pivot- ing jaws that allow virtually any angle to be securely clamped. Suitable for framing or furniture construction, etc. 1.2kg. BAND CLAMP Suitable for clamping case goods, picture frames, chairs, etc. Maximum circumference 3.8 metres. 520g. ProGrip™ System Baseplate mounting Cam-clamp mechanism CARBA-TEC® QUICK GEAR CLAMPS A fast action along with an all steel ratchet clamping mechanism make these clamps an indispensable addition to any workshop. The powerful clamping force (300kg) means that almost anything can be clamped quickly and securely, making them handy when fitting up projects by yourself. The lever mechanism in the handle also means that you can feel the pressure increasing so that you can apply the right amount of pressure. Pressing the release button on the ratchet handle relieves the pressure instantly. The clamping jaws are made from alloy material while the ratchet mechanism is steel. Sold in pairs. ROCKLER UNIVERSAL FENCE CLAMPS WITH CLAMP-IT® SQUARE Align it, clamp it, and fasten it to get perfect 90° angles every time! Included is a pair of Universal Fence Clamps in this all-in- one package! Order no. Price FM-105 $165.00 Order no. Description Price FM-14N 14” ProGrip $33.00 FM-24N 24” ProGrip $44.00 FM-36N 36” ProGrip $51.00 FM-50N 50” ProGrip $63.00 FM-14BD Universal Base $51.00 FM-08 Back to Back Adaptor Kit $23.00 Order no. Price 05F01-20 $51.00 Order no. Price TV-146 $44.00 Order no. Price TV-276 $44.00 Order no. Price TV-148 $49.00 Order no. Price 96601 $17.00 Order no. Price TV-286 $44.00 Order no. Price CQG-12 $65.00 Order no. Price RK-44117 $54.00
  • 93. Clamping, Vices & Benches 91Want to see more? See our website for our full range of products. BESSEY LM SERIES CLAMPS Originally intended for use where moderate clamping pressure was to be applied, Bes- sey’s LM Series quick action clamps have proven highly successful in DIY and industrial sectors alike. Particular applications this type of clamp suits include model and instrument making, light engineering and various home workshop tasks. LM series clamps have a throat of 50mm and are supplied with plastic caps. They are die cast and are intended for light duty work. BESSEY TG SERIES CLAMPS TG series clamps have an 80mm throat and are fitted with plastic caps. The thread of the grub screw. Threading in the sliding arm en- gages serrations in the rail when the sliding arm is inclined, ensuring maximum secu- rity and restricting slippage. These versatile clamps are a must when you require quick positioning with a rigid and secure hold on your workpiece. BESSEY MALLEABLE CAST IRON SCREW CLAMP • Clamping force up to 5,500 N • Ergonomically shaped wood handle • Stable profiled rail is resistant to torsion- al forces BESSEY TG KLIK CLAMPS Ultra light yet made of tough magnesium & cold-drawn, statically optimised, high-grade steel with glass-fibre reinforced plastic han- dles. All Klik clamps have 80mm throats. BESSEY CLIPPIX SPRING CLAMP • Lightweight, functional and easy to handle • Extremely sturdy BESSEY K-BODY CLAMPS Thanks to its special clamping mechanism that prevents any twisting or tilting move- ments as well as the precision guidance of the sliding arm (featuring hardened rollers), the K body clamp’s jaws stay parallel in every position. This ensures that clamped parts are continually secured at right angles with mini- mal marking. BESSEY ONE HANDED CLAMP • Clamping force up to 2,000N • Toolless conversion for spreading thanks to intelligent release mechanism in upper section • Ergonomically shaped 2-component plastic handle behind the rail BESSEY DUOKLAMP No chopping and changing with this one to convert it from a clamp to a spreader - all it takes is a flick of a switch! Turn the knob on the side of the DuoKlamp and you can switch from clamping to spreading in seconds. Flat parallel jaws ensure positive grip as clamp- ing pressure is applied in all directions. Bessey DuoKlamp Extender is an accessory for increasing the clamping and spreading capacity of DuoKlamps. Set up requires only a few movements of the accessory pieces. Opening is 50mm wide, throat depth is 70mm and spread width min. 200 to max. 1800mm ABOUT BESSEY Bessey, a German fami- ly-owned company, was founded in 1889. Inter- nationally recognized as a world-class steel maker, the company first introduced their line of malleable cast iron bar clamps in 1936 and heat-treated, all steel L clamps in 1952. BES- SEY has grown to be one of the largest hand tool clamp manufacturers in the world. Order no. Description Price BES-LM10 100mm $13.00 BES-LM15 150mm $13.00 BES-LM20 200mm $13.00 BES-LM25 250mm $14.00 BES-LM30 300mm $14.00 Order no. Desc. Price BES-TG16-2K 160mm $25.00 BES-TG20-2K 200mm $27.00 BES-TG25-2K 250mm $33.00 BES-TG30S12-2K 300mm $37.00 BES-TG40S12-2K 400mm $47.00 BES-TG50S12-2K 500mm $51.00 BES-TG60S12-2K 600mm $54.00 Order no. Desccription Price BES-TPN16 160mm $16.00 BES-TPN20 200mm $18.00 BES-TPN25 250mm $24.00 BES-TPN30 300mm $26.00 BES-TPN40 400mm $37.00 BES-TPN50 500mm $41.00 BES-TPN60 600mm $44.00 BES-TPN80 800mm $59.00 BES-TPN100 1000mm $64.00 Order no. Description Price BES-KLI12 120 x 80mm $29.00 BES-KLI16 160 x 80mm $30.00 BES-KLI20 200 x 80mm $31.00 BES-KLI25 250 x 80mm $32.00 Order no. Description Price BES-XC2 25 x 30mm $3.00 BES-XC5 50 x 50mm $6.00 BES-XC7 75 x 70mm $8.00 Order no. Desc. Price BES-KR30-2K 300mm $51.00 BES-KR60-2K 600mm $61.00 BES-KR80-2K 800mm $71.00 BES-KR100-2K 1000mm $80.00 BES-KR125-2K 1250mm $89.00 BES-KR150-2K 1500mm $96.00 BES-KR200-2K 2000mm $116.00 BES-KR250-2K 2500mm $134.00 Order no. Description Price BES-EZS15-8 150mm $29.00 BES-EZS30-8 300mm $31.00 BES-EZS45-8 450mm $31.00 BES-EZS60-8 600mm $37.00 BES-EZS90-8 900mm $42.00 Order no. Description Price BES-DUO16-8 160mm, 75 to 235mm spread $23.00 BES-DUO30-8 300mm, 75 to 380mm spread $24.00 BES-DUO45-8 450mm, 75 to 535mm spread $26.00 BES-DUO65-8 650mm, 75 to 685mm spread $29.00 BES-DKX Extender $37.00
  • 94. Power Tools 92 For more information & to shop online go to www.carbatec.com.au CARBA-TEC® BENCHTOP EDGEBANDER Features SWISS made 2000 watt Steinel heat gun with infinitely variable temperature con- trol and 2 speed blower. This machine will laminate pre-glued banding up to 56mm in width. Overall dimensions 680 x 680mm. ELECTRIC HAND DRILL POWERED LOCK MORTISER Simple, easy to use, self centring jig for cutting mortis- es for door locks. Drive shaft accepts 1/4” shank router bits or PC style mortise cutters. Mortise length and depth are controlled by the integrated stop-collars. Unit is powered by any electric power drill (not included) and is supplied in a great carry case. Maximum depth of cut: 150mm, 6.5kg. CARBA-TEC® END TRIMMER After edgebanding your board, the end trimmer is an essential accessory for perfectly trimming the excess length off your banding. PRO-GRIP HINGE MORTISE JIG Easy to set up, ad- just and use. This kit clamps on to your door, and uses the supplied mortise bit to recess your hinges accurately time and time again. Replacement bits to suit are Box Joint Bit (BJB-95), Mortising Bit (801-128- 11, if using bearing etc of old bit) or bearing (791-010-00 ) and stop collar (541-001-00). Optional Mortising Bits to suit EDGEBANDING EDGE TRIMMER Gives your workpiece a completely smooth finish. Simply hold up to the edge, squeeze the trimmer firmly and shave away any ex- cess edge banding material. When used in conjunction with our model ET-401 end trim- mer, use this tool after you have cut off ex- cess end material. Maximum material thick- ness 50mm. FEIN MULTIMASTER TOP KIT This kit includes; MultiMaster FMM 250Q. Maximum quality and stability thanks to metal gear hand, consistent use of ball/nee- dle roller bearings and a motor designed for continuous use. Convenient tool changes without a wrench with the QuickIN clamping system. Includes 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120 and 180, 1 perforated sanding plate with holes, 5 perfo- rated sanding sheets each grit 60, 80, 120 and 180, 1 perforated backing pad Ø115mm, perforated sanding sheets 2 x 60, 80, 180, 1 universal E-cut saw blade (44mm), 1 stand- ard E-cut saw blade (65mm), 1 x M-Cut saw blade (30mm), 1 x HSS segment saw blade, 1 x carbide rasp (triangular) perforated, 1 x fixed scraper, 1 x profile grinding set, 1 x dust extraction device and 1 x plastic carry case. CMT KITCHEN JIG Designed for joining kitchen bench tops at 90°. Made from stable phenolic resin. Makes rounding over or chamfering edges quick and easy. Also has facility for routing panel bolt recesses so that hardware can be fitted in minutes. FEIN MULTIMASTER START KIT This kit includes; MultiMaster FMM 250. Maximum quality and stability thanks to metal gear hand, consistent use of ball/nee- dle roller bearings and a motor designed for continuous use. Standard tool changed with a wrench. 8 star tool mounting with excellent torque transfer. Includes 1 sanding pad, 5 sanding sheets each grit size 60, 80, 120 and 180, 1 universal E-cut saw blade (44mm), 1 HSS segment saw blade, 1 fixed scraper and 1 limited edition carry bag. Order no. Price CTEB-401 $519.00 Order no. Price ET-401 $31.00 Order no. Price FM-78 $90.00 Order no. Width Price PC-43698 5/8”-16mm $59.00 PC-43703 3/4” - 19mm $59.00 PC-43700 13/16”-20mm $59.00 PC-43701 7/8”-22mm $59.00 PC-43702 15/16”-24mm $59.00 PC-43704 1”-25.4mm $59.00 PC-43745 1-1/4”-32mm $75.00 Order no. Price LM-2 $299.00 Order no. Price ET-1 $27.00 Order no. Price FEIN-TOPPLUS $659.00 Order no. Description Price FEIN-63502096023 63mm HSS Saw blade $40.00 FEIN-63502097027 80mm HSS Saw blade $44.00 FEIN-63502106015 80mm HSS Segment saw blade $48.00 FEIN-63502144014 85mm HSS Saw blade $70.00 FEIN-63502113019 84mm Segment Saw blade $28.00 FEIN-63502133017 35mm E-Cut Standard blade $28.00 FEIN-63502134015 65mm E-Cut Standard blade $30.00 FEIN-63502126013 35mm E-Cut Standard blade $37.00 FEIN-63502127017 65mm E-Cut Standard blade $41.00 FEIN-63502151018 29mm BiMetal E-Cut Universal blade $36.00 FEIN-63502152010 44mm BiMetal E-Cut Universal blade $38.00 FEIN-63502160010 35mm BiMetal E-Cut Longlife Blade $30.00 FEIN-63502161010 65mm BiMetal E-Cut Longlife Blade $32.00 FEIN-63502127040 E-Cut Saw Blade Multi-Pack $65.00 FEIN-63502154010 100mm HSS Saw Blade $76.00 FEIN-31810263000 Contact Guard $7.00 FEIN-63731001014 Triangle Carbide Rasp $45.00 FEIN-63731002017 Finger Carbide Rasp $46.00 FEIN-63502118016 63mm Carbide Segment Saw Blade $48.00 FEIN-63502105012 63mm Diamond Saw Blade $119.00 FEIN-63502114017 63mm Diamond Segment Saw Blade $97.00 FEIN-63903178017 Ridged Stopper Knife $21.00 FEIN-63903165013 Flexible Stopper Knife $21.00 Order no. Description Price CMT650 Kitchen Jig $235.00 CMT650-BUSH Guide Bush 30mm $9.00 812-620-11 Straight Bit $33.00 Order no. Price FEIN-STARTKIT $299.00
  • 95. Power Tools 93Want to see more? See our website for our full range of products. RANDOM ORBITAL SANDER Features; Compact, ergonomic d e s i g n with three softgrip surfaces for variable grip positions. Bosch Micro-filter system: perfect, efficient dust ex- traction. PALM ROUTER GMR1 Features; 550W motor - The most powerful palm router. Suitable for hinge mortis- ing, decorative working on edges, groove cutting, dovetail cutting, window cutouts, decorative inlays, flush trimming and more, power and precision in your hand. GWS 8-115 ANGLE GRINDER Features; 800 watts of power, good handling due to ergonomi- cally adapted housing and spin- dle lock for easy disc change. Invented for Life GOP 250CE MULTI CUTTER • Powerful 250W motor with constant electronics • Small grip circumference for convenient, comfortable work and precise results • Ball socket joint and Zn gear box, for flexibility, robustness and vibration reduction. GTA 2500 WORKBENCH • Robust steel construction and pneumatic tyres for high level of work safety GHO 15-82 PLANER The fastest and least expensive blade changes on the market due to durable Woodrazor blades and easiest possible adjustment. GHG 660 LCD HEAT GUN • Cold setting: heating element cools down within approx. 1 minute • Removable coarse dirt filter for cleaning GSB 16RE IMPACT DRILL • Robust and powerful 701 W motor for tough applications • Sturdy Metal Keyless chuck for easy and fast change of ac- cessories GCM 12 GDL SLIDING COMPOUND MITRE SAW • Axial-GlideTM System allows for expanded cutting capacity and smooth precision cuts. • Dual line precision Laser • Softstart for smooth ramp up of saw • Up to 110mm height and 341mm cutting width TABLE SAW GTS10XC • Motor brake, soft start, over load protection and constant speed electronics. • Integrated sliding table for workpieces up to 355mm STAND TO SUIT GTS10XC Folds flat for easy and light- weight transport and storage GLM 80 LASER RANGEFINDER + R60 MEASURING RAIL • Measurements up to 80m • New functionalit due to integrated 360° incline sensor • Up to 25,000 measurements per charge • Set includes rangefinder and rail GAM220MF ANGLE MEASURER • Automatic calculation of single and double mitre angles • Rapid calculation and transfer of angles by means of memory function GEX150 TURBO RANDOM ORBIT SANDER • Just one click: switch from fine sanding to coarse sanding or polishing • Five times more mate- rial removal in turbo operation (coarse sanding) GSR 18V-LI CORDLESS DRILL/DRIVER • Shortest head length in its class for easy handling • Longest runtime in its class - finish many applications in one charge Professional Pricing and product range may vary between store locations. Order no. Price BO-GWS8-115 $199.00 Order no. Price BO-GMR1 $309.00 Order no. Price BO-GEX125-1AE $159.00 Order no. Price BO-GTA2500 $499.00 Order no. Price BO-GOP250CE $229.00 Order no. Price BO-GHO1582 $219.00 Order no. Price BO-GHG660LCD $189.00 Order no. Price BO-GSB16REKLC $149.00 Order no. Price BO-GTS10XC $1,099.00 Order no. Price BO-GTA6000 $199.00 Order no. Price BO-GSR18V-LI2 $369.00 Order no. Price BO-GCM12GDL $1,199.00 Order no. Price BO-GEX150T $449.00 Order no. Price BO-GLM80SET $379.00 Order no. Price BO-GAM220MF $199.00
  • 96. Power Tools 94 For more information & to shop online go to www.carbatec.com.au Quality German Made Power Tools KAPEX KS 120 SLIDING COMPOUND MITRE SAW Strengths and benefits: • Twin-column design for accurate cuts • Compact, lightweight design for convenient transport • FastFix saw blade change for adaptation to the working material • Precision angle transfer via smart bevel and dual-line laser • Fine bevel adjustment from the front of the machine • Quick-action brake GEAR DRIVEN ECCENTRIC SANDER ROTEX RO 125 & RO 150 Strengths and benefits: • Three tools in one: coarse sanding, fine sanding and polishing • ROTEX rotary motion for efficient material removal • Eccentric motion for high-quality, scratch-free surfaces • FastFix sanding pad system, tool-less • Ideal ergonomic grip positions • Sanding up to the edge thanks to the Festool PROTECTOR ECCENTRIC 3 & 5MM SANDERS ETS 150/3 Strengths and benefits: • Choose the 3mm sanding stroke for an excellent surface finish. • Choose the 5 mm sanding stroke for efficient material removal. • Dual bearing for a long service life • Weighs only 1.8 kg for particularly effortless work. • Sanding pad brake for safe, faultless work - no rework. • Stepless speed preselection, constant speed even under load. CORDLESS DRILL CXS SET Strengths and benefits: • Impressive ergonomics and light weight (0,9 kg) for comfortable drilling and screwdriving. • The compact and handy shape facilitates work even in tight spaces. • FastFix interface and CENTROTEC rapid tool-change system. • 12-stage torque setting and switch-off for precise screwdriving. • Latest Lithium-ion battery technology for the longest sustained usage. • Angle attachment for accessing tight angles and hard to reach areas. Main applications; Furniture assembly and kitchen fitting, Carpentry/Joinery and interior fitting, Trade fair/Metal construction and shopfitting, Painting and interior decorating, Bodyshops and paintshops. THE CLEANTEX CT 26 & CT 36 MOBILE DUST EXTRACTORS Strengths and benefits: • 99.95 separation efficiency at .03 microns. • Antistatic function prevents static build-up during use. • Constantly high suction because of the compact high performance turbine. • Attachment of Systainers via Sys-Dock. • Hose garage and cable windup for greater tidiness and safety. • Economical because of the optimal use of the available volume with a SELFCLEAN filter bag in the container. Supplied in systainer Supplied in systainer Supplied in systainer ROUTER OF1400 Strengths and benefits: • Rocker and ratchet principle for convenient cutter changes • Tool-less copying ring changes • Torsionally rigid base plate due to guide columns on both sides • Up to 99 % dust extraction when rout- ing with chip deflector and dust extraction hood • Quick-acting brake and MMC Electronic • Routing depth adjustment to 1/10 mm Supplied in systainer Order no. Price FE-561288 $1,850.00 Order no. Diameter Price FE-571781 125mm $815.00 FE-571807 150mm $935.00 Order no. Description Price FE-571789 3mm $560.00 FE-571797 5mm $560.00 Order no. Price FE-564271 $349.00 Order no. Description Price FE-583494 26L $1,099.00 FE-583495 36L $1,199.00 Order no. Price FE-574346 $1,049.00
  • 97. Power Tools 95Want to see more? See our website for our full range of products. DOMINO JOINING SYSTEM DF 500 Strengths and benefits: • Versatile in application with DOMINO sizes 4x20 mm to 10x50mm. • Patented routing principle, unique among handheld tools, for smooth and accurate work. • Stops that are quick and easy to adjust, for accurate results. • Rotation-proof joint with DOMINOs providing maximum stability. • System accessories compatible with both DOMINO joiners. FESTOOL CORDLESS DRILL TI 15 IMPACT SET Strengths and benefits: • Impact driver, drill driver and angle driver all in one tool! • Perfect for decking or weatherboards - any tough, repetitive fastening task. • Built to last with a powerful 15V EC-TEC brushless motor DOMINO XL JOINING SYSTEM Strengths and benefits: • Versatile in application with DOMINO sizes 8x20mm to 14x140mm • Patented routing principle, unique among handheld tools, for smooth and accurate work. • Stops that are quick and easy to adjust. for accurate results. • Depth stops allow for routing from 15 to 70mm deep. • Innovative stop system - the DF700 is positioned quickly and accurately using integral stop pins. • Board joining, cabinet making or light framework joins - the DOMINO XL is perfect for large work pieces. Set version includes trim stop and cross stop accessories. Set VersionSkin versions from $309 PLUNGE SAW TS55R • Faster. Now with ultra flush housing, it is possible to cut 12mm away from the wall in seconds • Easier. Now cuts angles from -1° to 47° making negative angle cuts very easy to complete. • Better. Ensure a sharper, splinter free cut on both side thanks to new splinter guard system. ONE HANDED PLANER Strengths and benefits: • Low weight and perfectly balanced for fatigue-free work • Compact design, ergonomic handle, low operating noise • Spiral blade for a smooth planing pat- tern • Efficient dust extraction at the left/right side no clean-up needed • Plane up to 4mm in one pass ACCESSORIES Order no. Description Price Routing FE-491498 Guide Rail $195.00 FE-482107 Guide Rail Connector $30.00 FE-489570 Fastening Clamp $59.00 FE-492601 Guide Rail Adaptor $115.00 FE-466357 Guide Rail Bag $99.00 FE-494460 8mm Collet Suits OF1400 $99.00 FE-494465 1/2” Collet Suits OF1400 $99.00 Sawing FE-491498 Guide Rail 1.4m $195.00 FE-491501 Guide Rail 3m $630.00 FE-482107 Guide Rail Connector $30.00 FE-489570 Fastening Clamp $59.00 FE-492601 Guide Rail Adaptor $115.00 FE-466357 Guide Rail Bag $99.00 FE-491952 Saw Blade 160 x 48T $89.00 FE-495209 Splinter Guard 5m $55.00 FE-489022 Lead Deflector $29.00 FE-489660 Plug-It Lead 7.5m $59.00 FE-485724 Adhesive Cushion Strip 10m $35.00 Sanding FE-492127 125mm Sanding Pad Hard-Suits RO125 $69.00 FE-492125 125mm Sanding Pad Soft-Suits RO125 $69.00 FE-495991 125mm Abrasive Disc 80grit-10pk $14.00 FE-495992 125mm Abrasive Disc 120grit-10pk $13.00 FE-495993 125mm Abrasive Disc 180grit-10pk $13.00 FE-495994 125mm Abrasive Disc 320grit-10pk $13.00 FE-496993 150mm Mixed Abrasive Pack-25pce $41.00 FE-496148 150mm Sanding Pad-Soft suits RO150 $72.00 FE-496150 150mm Sanding Pad-Hard-suits RO150 $72.00 FE-496581 150mm Abrasive Disc 80grit-10pk $13.00 FE-496582 150mm Abrasive Disc 120grit-10pk $13.00 FE-496583 150mm Abrasive Disc 180grit-10pk $13.00 FE-496584 150mm Abrasive Disc 320grit-10pk $13.00 Dust Collection FE-487071 Reducing Sleeve 27mm $36.00 FE-452971 Filter Bag suits 33L models $99.00 FE-452970 Filter Bag suits 22L models $89.00 FE-496186 Self-Clean Bag suits CT36 $99.00 FE-498528 Reducing Sleeve 36-27mm $30.00 FE-496187 Self-Clean Bag suits CT26 $89.00 FE-452878 A/Static Hose 27mm x 3.5mm $225.00 FE-452898 Y-Piece Connector 50mm $83.00 Joining FE-494939 Domino 6 x 40mm 190pk $30.00 FE-494942 Domino 10 x 50mm 85pk $30.00 FE-494938 Domino 5 x 30mm 300pk $30.00 FE-494940 Domino 8 x 40mm 130pk $30.00 FE-494941 Domino 8 x 50mm 100pk $30.00 FE-493490 Domino Cutter 5mm $59.00 FE-493492 Domino Cutter 8mm $61.00 FE-493300 Domino 10 x 50mm 510pk $137.00 FE-493493 Domino Cutter 10mm $65.00 FE-493491 Domino Cutter 6mm $60.00 FE-493487 Domino Trim Stop $85.00 FE-498590 Domino Cross Stop $95.00 FE-498899 DF 500 Assortment Sys $399.00 FE-498204 XL Assort. Sys. 306 pcs D8/D10 $349.00 FE-498205 XL Assort. Sys. DS/XL D12 D14 128 pcs $299.00 Planing FE-488503 Spiral Planer Blade $27.00 Order no. Price FE-574257S $1,695.00 Order no. Description Price FE-564356 Set Version $799.00 Order no. Description Price FE-574423 Basic $1,975.00 FE-574423S Set Version $2,075.00 Order no. Price FE-561655 $999.00 Order no. Price FE-574544 $550.00
  • 98. Power Tools 96 For more information & to shop online go to www.carbatec.com.au SUPERJAWS - PORTABLE CLAMPING SYSTEM This is the workstation you take right to the job. It provides fast and easy hands free clamping action of material up to 956mm and features a massive force of up to 1000kg for all clamping or pressing applications. It holds anything; car parts, bicycles, timber and tubing. Standard jaws are made of Urethane, maximum load approximately 100kg. Folded size 275 x 775 x 295mm, standing size 980 x 1000 x 860mm. Weighs 16kg. UPGRADE YOUR SUPERJAWS LOG JAWS- For Powerful Clamping CAST IRON ENGINEERS JAWS TOOL TRAY WOODRACK - STORAGE SYSTEM Ideal for the woodworking workshop. Easy to install. Highly suitable for metal products in an engineering workshop. Also provides an excellent storage solution in domestic homes for storing a wide range or products neatly and safely. Height Winder Kit 3 Stage turret PRECISION ROUTERS MULTI-STAND - WORK SUPPORT Multi-purpose, adjustable support stand with extra- wide tripod base for excellent stability on level or uneven ground. Folds down in seconds for convenient transportation and storage. Maximum load is approximately 100kg. Height range is 835- 940mm, Vertical through horizontal tilt adjustment. 6.2kg. Mitre Cuts 45° Bevel Saw SERIES 2000 WORKCENTRE SYSTEM You don’t need to be a professional woodworker for craftsman-like results. With a Triton Workcentre and a circular saw you’ll be amazed at how easily and accurately you can make quality furniture, toys, craft items and household renovations. As a stand-alone unit the Workcentre offers amazing versatility, unparalleled by any other product. With the addition of Triton quality accessories, it becomes a complete woodworking system. Circular saw not included. Specifications Suits Most circular saws 184-235mm Cuts Rip up to 620mm, Mitre 0° to 45° left & right 45° bevel rip up to 400mm wide, Crosscut up to 500mm Bevel crosscut and compound mitre Capacity Rip: 0 to 620mm, Crosscut: Up to 500mm Workshop Footprint Standing: 900 x 600 x 1300mm, Folded: 350 x 440 x 1000mm, Table Top: 870 x 640mm Weight 35kg (without saw) Mitre Saw Specifications TRI-JOF001 TRI-TRA001B Input Power 1010W, 1-1/3hp 2400W, 3.2hp Speed 8000- 22,000rpm 8000- 21,000rpm Soft Start Yes Yes Speed Control Yes Yes Collet 1/2” with 1/4” reducer 1/2” with 1/4” reducer Depth Adjustment Micro Winder and Conventional “free” plunge Winder - Rack & Pinion, Micro Winder, Conventional “free” plunge Spindle Lock Auto Auto Plunge Range 0 to 59mm 0 to 68mm Micro Adjustment Infinite Infinite Bit Changes Through-base, single wrench action, auto shaft lock Through-base, single wrench Safety On/Off Yes Yes Weight 4.3kg 7.4kg Price $279.00 $399.00 Order no. Price TRI-MSA200 $59.00 Order no. Price TRI-SJA200 $169.00 Order no. Price TRI-SJA460 $39.00 Order no. Price TRI-SJA470 $59.00 Order no. Price TRI-SJA420 $35.00 Order no. Price TRI-WRA001 $59.00 Order no. Price TRI-WCA201C $699.00
  • 99. Routing, Saw Blades & Accessories 97CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM CMTTM 12 PIECE ROUTER BIT SET A multi-purpose set for any job. Set includes 2 straight bits, 1 mortising bit, 1 roundnose bit, 1 v-groove, 1 dovetail bit, 1 cove bit, 1 rabbeting bit, 1 roundover bit, 1 ogee bit, 1 chamfer bit and 1 flush trim bit. Made in Italy. Twelve bits, 1/4” shank only. 1.4kg. Box supplied may differ from that shown. CMTTM 13 PIECE ROUTER BIT SET A multi-purpose set for any job. Set includes 3 straight bits, 1 flush trim bit, 1 mortising bit, 1 roundnose bit, 1 v-groove bit, 1 dovetail bit, 1 cove bit, 1 rabbeting bit, 1 roundover bit, 1 ogee bit and 1 chamfer bit. 1/2” shank only. Made in Italy. Box supplied may differ from that shown. 1.98kg. CMTTM 3 PIECE KITCHEN SET Set includes one rail and stile matched set and one ogee style raised panel bit . Three bits, 1/2” shank only. Made in Italy. Box supplied may differ from that shown. 1.35kg. 6 PIECE PROFILE BIT SET A multi-purpose set for any job. Set includes: 1 chamfer bit, 1 ogee bit, 1 roundover bit, 1 rabbeting bit, 1 cove bit, 1 round nose bit. All bits have 1/2” shanks. CMTTM 3 PIECE KITCHEN SET WITH BACKCUTTER Set includes one rail and stile matched set and one ogee style raised panel bit with backcutter. A backcutter allows the milling of the front and back of the panel in the same pass. Three bits, 1/2” shank only. Made in Italy. Box supplied may differ from that shown. CMTTM ENTRY & INTERIOR DOOR ROUTER BIT SET Simplifies door construction, making it easy as 1, 2, 3! It is not the only advantage, in fact this is a multifunctional set for door and furniture makers building entry or passage doors and any furni- ture tenons. The included tenon cutter produces a beefy 27mm (1-1/16”) long tenon. Coupled with the cope cutter, you can produce long and strong tenons with minimum setup. As an extra bonus the tenon cutter can be used for furniture making requiring any tenon from 4,7mm (3/16”) to 16mm (5/8”) thick. CMTTM 13 PIECE ROUTER BIT SET A set suitable for use with the Leigh D4-24 dove- tailing system. Set includes 3 straight bits and 10 dovetail bits (7x8°, 1 x14°, 1 x 10° and 1 x 18°). Made in Italy. Thirteen bits, 1/2” & 1/4” shanks, mixed. Box supplied may differ from that shown. CMTTM GRAND RABBET SET The ultimate rabbeting set! Utilises different size collars to achieve rabbets from 1/16” to 3/4” depth. Made in Italy. Box supplied may differ from that shown. 1.22kg. CMTTM 5 PIECE KITCHEN SET Set includes one rail and stile matched set, one ogee style raised panel bit, reverse glue joint bit and drawer lock bit. Five bits, 1/2” shank only. Made in Italy. Box supplied may differ from that shown. CMTTM SMALL ARCH DOOR SET This set will produce beautiful raised panel doors, with a classic bevelled profile. Designed for use in fine furniture making, this set includes two matched rail & stile bits for producing frames in 16 to 22mm thick material. The panel bit is designed for 12.7mm material. Three bits, 1/2” shank only. Box supplied may differ from shown. Order no. Price 800-503-11 $259.00 Order no. Price 800-505-11 $309.00 Order no. Price 800-513-11 $205.00 Order no. Price 800-504-11 $185.00 Order no. Price 800-521-11 $249.00 Order no. Price 800-527-11 $339.00 Order no. Price 800-519-11 $259.00 Order no. Price 835-503-11 $145.00 Order no. Price 800-509-11 $309.00 Order no. Price 800-524-11 $155.00
  • 100. Routing, Saw Blades & Accessories 98 CMT ORANGE TOOLS - THE ART OF CUTTING X D CMTTM TWO FLUTE STRAIGHT BIT CMTTM PATTERN BITS X D CMTTM SOLID CARBIDE TWO FLUTE SPIRAL BIT L D X CMTTM SOLID CARBIDE TWO FLUTE DOUBLE BEARING SPIRAL BIT CMTTM MORTISE COMPRESSION UPCUT/ DOWNCUT 2 EDGE Provides an excellent finish when mortising laminates and melamine. Can also be used with hardwoods and other wood composites. Shank 9.53mm, total length 76.2mm. CMTTM SOLID CARBIDE 2 FLUTE UPCUT SPIRAL ROUTER BIT SET. Set contains the following; one 1/4” shank, 3/16” upcut bit, one 1/4” shank, 1/4” upcut bit, one 1/2” shank, 5/16” upcut bit, one 1/2” shank, 3/8” upcut bit, one 1/2” shank, 1/2” upcut bit, sup- plied in a plastic storage case. CMTTM STRAIGHT ROUTER BIT WITH INDEXABLE KNIFE Ideal for fast plunge cuts and other grooving ap- plications. Use these single edge bits in CNC or portable routers for work in laminated stock, soft and hardwood. 12mm dia, 50mm cutting length, 103mm total length, 12.7mm shank diameter. This bit suits the CMT650 Kitchen Jig. CMTTM 6 PIECE MORTISING SETS Super-strength high-speed steel mortising bits safely packaged in foam padded plastic cases to prevent them from damage. Ideal for heavy mortising jobs, these bits are the economical and perfect addition to your workshop. Bit diam- eter: 6 - 8 - 10 - 12 - 14 - 16mm. Order no. D X L Price 1/4” Shank - Long Series 812-032-11 3.2 12.7 50.8 $28.00 812-060-11 6.0 25.4 60.3 $30.00 812-064-11 6.35 25.4 60.3 $30.00 812-080-11 8.0 31.7 60.3 $31.00 812-095-11 9.5 31.7 63.5 $31.00 812-100-11 10.0 31.7 60.3 $31.00 812-120-11 12.0 31.7 60.3 $31.00 812-127-11 12.7 31.7 70.0 $31.00 812-140-11 14.0 31.7 60.3 $33.00 812-150-11 15.0 31.7 66.7 $33.00 812-158-11 15.8 31.7 70.0 $33.00 812-160-11 16.0 31.7 66.7 $34.00 1/2” Shank - Short Series 812-595-11 9.5 31.7 73.0 $31.00 812-600-11 10.0 31.7 70.0 $31.00 812-611-11 11.1 31.7 82.5 $33.00 812-620-11 12.0 31.7 70.0 $33.00 812-627-11 12.7 38.1 79.5 $34.00 812-628-11 12.7 50.8 89.0 $42.00 812-660-11 16.0 31.7 70.0 $31.00 812-690-11 19.0 38.1 82.5 $42.00 Order no. D X L Price 1/4” Shank - Short Series 811-020-11 2.0 4.0 38.0 $25.00 811-030-11 3.0 8.0 45.0 $25.00 811-032-11 3.2 9.5 45.0 $27.00 811-040-11 4.0 10.0 45.0 $27.00 811-047-11 4.75 12.7 50.8 $27.00 811-050-11 5.0 12.0 50.8 $27.00 811-060-11 6.0 16.0 50.8 $27.00 811-064-11 6.35 19.0 50.8 $27.00 811-065-11 6.35 19.0 57.2 $27.00 811-070-11 7.0 ­­­­­18.0 48.0 $27.00 811-080-11 8.0 20.0 50.8 $27.00 811-081-11 8.0 25.4 71.5 $30.00 811-095-11 9.5 19.0 50.8 $30.00 811-096-11 9.5 25.4 63.5 $30.00 811-100-11 10.0 20.0 48.0 $30.00 811-120-11 12.0 20.0 50.0 $30.00 811-123-11 12.3 25.4 57.2 $30.00 811-127-11 12.7 19.0 57.2 $30.00 811-140-11 14.0 20.0 50.0 $30.00 811-142-11 14.2 14.2 57.2 $30.00 811-150-11 15.0 20.0 57.2 $30.00 811-158-11 15.8 19.0 66.7 $30.00 811-160-11 16.0 20.0 57.2 $30.00 811-180-11 18.0 20.0 50.0 $30.00 811-182-11 18.2 25.4 57.2 $30.00 811-191-11 19.0 20.0 57.2 $30.00 811-200-11 20.0 20.0 50.0 $30.00 811-220-11 22.0 20.0 57.2 $30.00 811-254-11 25.4 19.0 50.8 $34.00 1/2” Shank - Short Series 811-560-11 6.0 19.0 60.3 $31.00 811-564-11 6.35 19.0 60.3 $31.00 811-595-11 9.5 25.4 66.7 $31.00 811-600-11 10.0 25.4 63.5 $31.00 811-620-11 12.0 25.4 63.5 $31.00 811-623-11 12.3 25.4 63.5 $31.00 811-627-11 12.7 25.4 66.7 $31.00 811-628-11 12.7 25.4 82.5 $32.00 811-660-11 15.8 25.4 63.5 $32.00 811-661-11 16.0 25.4 63.5 $32.00 811-682-11 18.2 25.4 63.5 $32.00 811-690-11 19.0 25.4 63.5 $32.00 811-754-11 25.4 31.7 76.2 $39.00 Order no. D X L Price 1/4” Shank 811-081-11B 8.0 25.4 71.5 $32.00 811-127-11B 12.7 19.0 57.2 $32.00 812-127-11B 12.7 31.7 70.0 $38.00 811-142-11B 14.2 14.2 57.2 $37.00 811-159-11B 15.8 12.7 58.0 $38.00 811-158-11B 15.8 19.0 66.7 $38.00 812-158-11B 15.8 31.7 70.0 $38.00 811-191-11B 19.0 20.0 57.2 $38.00 1/2” Shank 811-690-11B 19.0 25.4 63.5 $50.00 812-690-11B 19.0 38.1 82.5 $50.00 812-691-11B 19.0 50.8 92 $50.00 811-222-11B 22.2 25.4 66.7 $50.00 Spare Parts 791-010-00 12.7mm bearing $7.00 791-009-00 15.8mm bearing $9.00 791-004-00 19mm brg 1/4” bore $7.00 791-011-00 19mm brg 1/2” bore $19.00 791-021-00 22.2mm bearing $8.00 799-001-00 3/8” x 1/2” bushing $15.00 541-001-00 Stopcollar 1/4” shanks $6.00 541-002-00 Stopcollar 1/2” shanks $6.00 Order no. D X L Price 1/4” Shank Upcut Bit 191-001-11 3.2 12.7 50.8 $27.00 191-003-11 4.0 12.7 50.8 $27.00 191-005-11 4.75 19.0 50.8 $27.00 191-007-11 6.35 19.0 50.8 $27.00 191-008-11 6.35 25.4 63.5 $27.00 191-081-11 8.0 32.0 80.0 $41.00 1/4” Shank Downcut Bit 192-001-11 3.2 12.7 50.8 $27.00 192-003-11 4.0 12.7 50.8 $27.00 192-005-11 4.75 19.0 50.8 $27.00 192-007-11 6.35 19.0 50.8 $27.00 192-008-11 6.35 25.4 63.5 $27.00 Order no. D X L Price 1/2” Shank Upcut Bit 191-501-11 8.0 25.4 76.2 $79.00 191-503-11 9.5 31.7 76.2 $79.00 191-505-11 12.7 31.7 76.2 $79.00 191-506-11 12.7 38.1 89.0 $94.00 191-507-11 12.7 50.8 101.5 $104.00 1/2” Shank Downcut Bit 192-501-11 8.0 25.4 76.2 $79.00 192-503-11 9.5 31.7 76.2 $79.00 192-505-11 12.7 31.7 76.2 $79.00 192-506-11 12.7 38.1 89.0 $94.00 192-507-11 12.7 50.8 101.5 $115.00 Order no. D X L Price 1/2” Shank Upcut Bit 191-505-11B 12.7 31.7 89 $115.00 191-507-11B 12.7 50.8 114 $157.00 1/2” Shank Downcut Bit 192-505-11B 12.7 31.7 89 $115.00 192-507-11B 12.7 50.8 114 $157.00 Order no. Cut dia. Cut len. Cut len.2 Price 190-513-11 9.53mm 22.2mm 4.8mm $100.00 Order no. Price 191-000-02 $241.00 Order no. Description Price 652-621-11 Indexable Knife Router Bit $83.00 790-500-01 Replaceable Knife $12.00 Order no. Description Price 172-001-10 LH Rotation, 13mm Shank $157.00 102-001-10 LH Rotation, 16mm Shank $157.00
  • 101. TM Routing, Saw Blades & Accessories 99CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM Didn’t find the router bit you wanted? Search online at www.carbatec.com.au for the full range. CMTTM MORTISE & PLANER BITS DD X X CMTTM SUPER DUTY FLUSH TRIM BITS X D X D CMTTM ROUND NOSE BIT X DR CMTTM 90° V GROOVE BIT X D X D CMTTM FLUSH TRIM BIT X D A° CMTTM FLUSH TRIM BIT D X CMTTM 60° LASER POINT BIT D X CMTTM 60° LETTERING BIT H X r=3.2mm CMTTM 60° LETTERING BIT WITH BEARING X H r=3.2mm 90° 90° 60° 90° 60° CMTTM 3 IN 1 FLUSH TRIM BIT CMTTM SOLID CARBIDE TRIMMER BIT An economic version of our combination trimmer bits, these solid carbide bits give you back clean straight or bevel edges. With radial relief cutting edges, you can make flush or 7˚ bevel cuts. For more versatility, choose the combination flush 10˚ bit. Popular for their long life, they are particularly good for laminate work. CMTTM 90° V GROOVE BIT WITH BEARING D D Order no. D X Price 1/4” Shank without bearing 801-128-11 12.7 7.9 $24.00 801-127-11 12.7 19.0 $24.00 801-158-11 15.8 19.0 $27.00 801-190-11 19.0 19.0 $27.00 801-317-11 31.7 12.7 $32.00 1/2” Shank without bearing 801-627-11 12.7 19.0 $24.00 801-690-11 19.0 19.0 $27.00 801-818-11 31.7 5.7 $32.00 801-817-11 31.7 12.7 $32.00 1/4” Shank with bearing 801-127-11B 12.7 19.0 $30.00 801-128-11B 12.7 8.0 $30.00 801-158-11B 15.8 19.0 $33.00 801-190-11B 19.0 19.0 $34.00 1/2” Shank with bearing 801-818-11B 31.7 5.7 $38.00 801-817-11B 31.7 12.7 $42.00 Spare Parts 791-010-00 12.7mm bearing $7.00 791-009-00 15.8mm bearing $9.00 791-004-00 19mm brg 1/4” bore $7.00 791-015-00 31.7mm bearing $15.00 541-001-00 Stopcollar 1/4” shank $6.00 541-002-00 Stopcollar 1/2” shank $6.00 Order no. D X Price 1/4” Shank 806-096-11 9.5 12.7 $29.00 806-095-11 9.5 25.4 $29.00 806-127-11 12.7 25.4 $31.00 806-128-11 12.7 12.7 $31.00 806-064-11 6.35 25.4 $36.00 1/2” Shank 806-627-11 12.7 25.4 $31.00 806-628-11 12.7 12.7 $31.00 806-629-11 12.7 38.1 $41.00 806-630-11 12.7 50.8 $45.00 Spare Parts 791-002-00 9.5mm bearing $8.00 791-003-00 12.7mm bearing $7.00 990-058-00 Bearing Screw $3.00 Order no. D X Price 1/4” Shank 806-191-11 19.0 25.4 $41.00 1/2” Shank 806-691-11 19.0 25.4 $41.00 806-690-11 19.0 50.8 $52.00 Spare Parts 791-004-00 19mm bearing $7.00 990-058-00 Bearing Screw $3.00 Order no. D X Price 1/4” Shank 807-128-11 12.7 12.7 $32.00 807-190-11 19 15.87 $46.00 1/2” Shank 807-690-11 19 15.87 $46.00 Spare Parts 791-042-00 12.7mm Tri-bearing $17.00 791-043-00 19mm Tri-bearing $17.00 990-058-00 Screw 1/8” W $3.00 Order no. R D X Price 1/4” Shank 814-032-11 1.6 3.2 9.5 $28.00 814-064-11 3.2 6.4 12.7 $29.00 814-095-11 4.75 9.5 6.4 $29.00 814-127-11 6.35 12.7 9.5 $29.00 814-160-11 7.9 15.8 9.5 $30.00 814-190-11 9.5 19.0 11.5 $32.00 1/2” Shank 814-564-11 3.2 6.4 15.9 $39.00 814-627-11 6.35 12.7 31.7 $40.00 814-660-11 7.9 15.8 31.7 $48.00 814-690-11 9.5 19.0 31.7 $48.00 814-754-11 12.7 25.4 31.7 $61.00 Order no. D X Price 1/4” Shank 815-064-11 6.35 8.0 $27.00 815-095-11 9.5 12.7 $28.00 815-127-11 12.7 12.7 $28.00 1/2” Shank 815-660-11 15.8 12.7 $35.00 815-690-11 19.0 15.8 $37.00 Order no. D X Price 1/4” Shank 815-127-11B 12.7 12.7 $34.00 1/2” Shank 815-690-11B 19.0 15.8 $50.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 791-011-00 19mm Bearing $19.00 541-001-00 Stop Collar 1/4” Shank $6.00 541-002-00 Stop Collar 1/2” Shank $6.00 Order no. D X A° Price 1/4” Shank 821-022-11 12.0 12.7 0-22° $25.00 821-030-11 12.0 12.7 0.30° $25.00 821-045-11 12.0 12.7 0-45° $25.00 Order no. D X Price 1/4” Shank 858-001-11 12.7 11.0 $34.00 Order no. D H X Price 1/4” Shank 849-001-11 25.4 6.0 19.0 $40.00 1/2” Shank 849-501-11 28.5 9.0 19.0 $40.00 Order no. D H X Price 1/2” Shank 849-501-11B 28.5 9.0 19.0 $48.00 Spare Parts 791-027-00 28.5mm Bearing $9.00 541-002-00 Stop Collar 1/2” Shank $6.00 Order no. D X A Price 1/4” SHANK 842-095-11 6.35 9.5 0˚ $16.00 843-063-11 6.35 6.35 7˚ $19.00 843-064-11 6.35 9.5 0-10˚ $19.00
  • 102. Routing, Saw Blades & Accessories 100 CMT ORANGE TOOLS - THE ART OF CUTTING CMTTM THREE WING SLOT CUTTER SET CMTTM SLOT CUTTERS WITH ARBOR & BEARING X D H CMTTM SLOT CUTTER BLADES WITHOUT ARBOR CMTTM SLOT CUTTER ARBORS CMTTM SLOT CUTTER SET Creates slots, grooves and rabbets in all materi- als. Ideal for biscuit joints and milling perfect tongue and groove joints. The set includes 4 different bearings which allow cutting depth of 7.95, 9.55, 12.8 and 14.3mm. * long series CMTTM BOWL & TRAY BIT X D R CMTTM BOWL & TRAY BIT WITH BEARING X D R CMTTM ROUND NOSE BIT WITH BEARING X R D Order no. D X H Price 800-506-11 47.6 3.2-18 12.7 $104.00 Spare Parts 824-128-00 12.7mm bearing $20.00 791-005-00 22mm bearing $7.00 990-020-00 Bearing Nut $3.00 Order no. D X H Price 1/4” Shank 822-316-11A 47.6 1.6 12.7 $41.00 822-320-11A 47.6 2.0 12.7 $41.00 822-324-11A 47.6 2.4 12.7 $41.00 822-332-11A 47.6 3.2 12.7 $41.00 822-340-11A 47.6 4.0 12.7 $41.00 822-348-11A 47.6 4.8 12.7 $41.00 822-360-11A 47.6 6.0 12.7 $41.00 822-364-11A 47.6 6.4 12.7 $41.00 1/2” Shank 822-316-11B 47.6 1.6 12.7 $41.00 822-320-11B 47.6 2.0 12.7 $41.00 822-324-11B 47.6 2.4 12.7 $41.00 822-332-11B 47.6 3.2 12.7 $41.00 822-340-11B 47.6 4.0 12.7 $41.00 822-348-11B 47.6 4.8 12.7 $41.00 822-360-11B 47.6 6.0 12.7 $41.00 822-364-11B 47.6 6.4 12.7 $41.00 Order no. D X Bore Price 822-315-11 47.6 1.5 8.0 $21.00 822-316-11 47.6 1.6 8.0 $21.00 822-318-11 47.6 1.8 8.0 $21.00 822-320-11 47.6 2.0 8.0 $21.00 822-322-11 47.6 2.2 8.0 $21.00 822-324-11 47.6 2.4 8.0 $21.00 822-325-11 47.6 2.5 8.0 $21.00 822-328-11 47.6 2.8 8.0 $21.00 822-330-11 47.6 3.0 8.0 $21.00 822-332-11 47.6 3.2 8.0 $21.00 822-335-11 47.6 3.5 8.0 $21.00 822-340-11 47.6 4.0 8.0 $21.00 822-348-11 47.6 4.8 8.0 $21.00 822-350-11 47.6 5.0 8.0 $21.00 822-360-11 47.6 6.0 8.0 $21.00 822-364-11 47.6 6.4 8.0 $21.00 Order no. Price 1/4” Shank 824-064-00 Slot Cutter Arbor w/o bearing $16.00 824-064-10 Slot Cutter Arbor with bearing $20.00 1/2” Shank 824-127-00 Slot Cutter Arbor w/o bearing $16.00 824-127-10 Slot Cutter Arbor with bearing $20.00 Spare Parts 791-005-00 22mm Bearing $7.00 541-501-00 4mm Spacer $4.00 541-500-00 3mm Spacer $4.00 990-020-00 Nut for arbor $3.00 Order no. Description Price 823-001-11 Slot cutter set $209.00 Order no. Set Contains Qty 822-316-11 1.6mm (1/16”) 1 823-332-11 3.2mm (1/8”) with 45° bore 1 823-340-11 4mm with 45° bore 1 822-348-11 4.8mm (3/16”) 1 823-364-11 6.4mm (1/4”) with 45° bore 3 824-127-10 Slot cutter Ø22mm bearing 1 824-121-10 Slot cutter Ø22mm bearing 1 824-122-10 Slot cutter Ø22mm bearing 1 824-128-10* Slot cutter Ø22mm bearing 1 791-033-00 Ø31.7mm bearing 1 791-030-00 Ø28.5mm bearing 1 791-034-00 Ø19mm bearing 1 991-067-00 Hex key 3mm 1 Order no. R D X Price 1/4” Shank 851-001-11 3.2 11.1 12.7 $36.00 851-002-11 6.35 19.0 15.8 $45.00 1/2” Shank 851-501-11 6.35 19.0 15.8 $41.00 851-502-11 6.35 31.7 15.8 $50.00 Order no. R D X Price 1/4” Shank 851-002-11B 6.35 19.0 15.8 $52.00 1/2” Shank 851-501-11B 6.35 19.0 15.8 $58.00 851-502-11B 6.35 31.7 15.8 $61.00 Order no. R D X Price 1/4” Shank 814-127-11B 6.35 12.7 9.5 $35.00 814-160-11B 7.9 15.8 9.5 $39.00 814-190-11B 9.5 19.0 11.5 $44.00 1/2” Shank 814-690-11B 9.5 19.0 31.7 $62.00 Spare Parts 791-010-00 12.7mm Bearing 1/4” $7.00 791-009-00 15.8mm Bearing 1/4” $9.00 791-004-00 19.0mm Bearing 1/4” $7.00 791-011-00 19.0mm Bearing 1/2” $19.00 541-001-00 Stop Collar 1/4” $6.00 541-002-00 Stop Collar 1/2” $6.00
  • 103. TM Routing, Saw Blades & Accessories 101CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM DCMTTM BOX JOINT BIT Profili in scala 1:1 Dimensioni in mm 16-12 mm 24-20 32-28 40-36 16-12 9,5 4 CMTTM PROFESSIONAL FINGER JOINT BIT D CMTTM RABBETING SETS D H These rabbeting bits are fast and accurate - you can quickly produce inset doors and drawer fronts, make strong rabbet joints or mill perfect tongue and groove joints. Each set comes complete with one rabbeting bit and six interchangeable ball bearing guides. CMTTM DRAWER LOCK BIT D X CMTTM EDGE BANDING BIT SET D A° CMTTM RABBETING BITS WITH BALL BEARING GUIDE X D H CMTTM KEYHOLE & SLATWALL BIT D1 X D2 CMTTM DOVETAIL BITS X D A° CMTTM REVERSE GLUE JOINT BIT D CMTTM 45° LOCK MITRE JOINT BIT Order no. D Max. Thickness Price 800-616-11 47.6 40 $125.00 Spare Parts 822-340-11 4mm slot cutter $21.00 791-027-00 28.5mm Bearing $9.00 Order no. D Max. Thickness Price 800-606-11 47.6 36.0 $136.00 Spare Parts 822-005-11 2mm slot cutter $26.00 822-006-11 6mm slot cutter $28.00 791-028-00 37mm Bearing $10.00 Order no. D1 D2 X Price 1/4” Shank 850-001-11 9.5 4.8 11 $29.00 1/2” Shank 850-501-11 9.5 4.8 11 $33.00 850-601-11 30 9.5 17.5 $54.00 850-602-11 34.9 12.7 17.5 $71.00 Order no. D X Price 1/4” Shank 855-002-11 31.7 12.7 $52.00 1/2” Shank 855-502-11 50..8 12.7 $69.00 Order no. D I A Price 1/2” Shank 855-510-11 40 25.4 30° $115.00 Spare Parts 990-423-00 Shield Ø12.7mm $3.00 791-018-00 Bearing Ø15.8mm $11.00 990-058-00 Screw TCEI 1/8W $3.00 991-057-00 Hex Key 3/32” $7.00 Order no. D X H Price 1/4” Shank 835-317-11 31.7 12.7 9.5 $35.00 835-350-11 34.9 12.7 12.7 $39.00 1/2” Shank 835-817-11 31.7 12.7 9.5 $35.00 835-850-11 34.9 12.7 12.7 $39.00 835-851-11 34.9 19.0 9.5 $42.00 Spare Parts 791-002-00 9.5mm Bearing $8.00 791-003-00 12.7mm Bearing $7.00 990-058-00 Bearing Screw $3.00 Order no. D X H Price 1/4” Shank 835-001-11 34.9 12.7 3.2-12.7 $73.00 1/2” Shank 835-501-11 34.9 12.7 3.2-12.7 $73.00 835-502-11 34.9 19.0 3.2-12.7 $73.00 Spare Parts 791-703-00 Set of 6 Bearings $52.00 Order no. D X A° Price 1/4” Shank 818-065-11 6.35 6.35 8° $25.00 818-064-11 6.35 8.3 7.5° $31.00 818-079-11 7.9 6.0 18° $30.00 818-081-11 8.0 9.5 8° $31.00 818-080-11 8.0 9.5 9° $31.00 818-096-11 9.5 9.5 9° $31.00 818-098-11 9.5 9.5 14° $31.00 818-097-11 9.5 12.7 8° $31.00 818-111-11 11.1 15.8 8° $31.00 818-132-11 12.7 10.3 18° $27.00 818-128-11 12.7 12.7 14° $31.00 818-130-11 12.7 12.7 14° $27.00 818-133-11 12.7 16.0 10° $27.00 818-129-11 12.7 20.6 8° $27.00 818-142-11 14.2 9.5 14° $31.00 818-158-11 15.8 22.2 7° $36.00 818-190-11 19.0 22.2 7° $36.00 818-191-11 19.0 22.2 14° $36.00 DOVETAIL BITS WITH BEARING GUIDE 818-142-11B 14.2 9.5 14° $37.00 Spare Parts 791-010-00 12.7mm Bearing $7.00 541-001-00 Stop Collar 1/4” shank $6.00 1/2” Shank 818-564-11 6.35 8.3 7.5° $31.00 818-580-11 8.0 9.5 9° $38.00 818-596-11 9.5 9.5 9° $38.00 818-628-11 12.7 12.7 14° $31.00 818-658-11 15.8 22.2 7° $38.00 818-674-11 17.4 25.4 8° $38.00 818-691-11 19.0 19.0 14° $38.00 818-690-11 19.0 22.2 7° $38.00 818-706-11 20.6 31.7 8° $40.00 Order no. D Mid Joint Max Joint Price 1/2” Shank 855-501-11 44.4 15.0 30.0 $73.00 Order no. D X A Price 1/2” Shank 855-503-11 69.8 31.7 45° $115.00 855-504-11 50.8 22.2 45° $94.00
  • 104. Routing, Saw Blades & Accessories 102 CMT ORANGE TOOLS - THE ART OF CUTTING R CMTTM OVOLO BITS X D CMTTM ROMAN OGEE BIT WITH BALL BEARING GUIDE X D R CMTTM OGEE WITH FILLET BIT & BALL BEARING GUIDE D X r1 r2 CMTTM ROUNDING OVER BIT WITH BALL BEARING GUIDE X D H R CMTTM BEADING BIT WITH BALL BEARING GUIDE X D 9.5mm R R 1,6 R 3,2 R 4,75 R 6,35 R8 R 9,5 R 12,7 R 16 R 19 R 22,2 R 31,75 R 28,6R 25,4 Drawings are 1:1 scale 3,2 R 6,35 R 8 R 9,5 R 4,75 R 19 R 22,2 R 16 1,6 D X R CMTTM CLASSICAL BIT WITH BALL BEARING GUIDE CMTTM OGEE WITH FILLET BIT & BALL BEARING GUIDE D X r2 r1 CMTTM CHAMFER BIT WITH BALL BEARING GUIDE X D A° D X A° CMTTM V-TONGUE & GROOVE SET 7/8” Max 5/16” 7/8” 45 855.506.11 Min. 1/4” Order no. R D X Price 1/4” Shank 827-050-11 5.0 21.0 12.0 $34.00 827-060-11 6.0 23.0 12.0 $35.00 827-095-11 9.5 31.7 13.8 $38.00 827-127-11 12.7 38.1 18.5 $45.00 1/2” Shank 827-560-11 6.0 23.0 12.0 $34.00 827-595-11 9.5 31.7 13.8 $39.00 827-627-11 12.7 38.1 18.5 $44.00 827-660-11 15.9 44.5 22.2 $53.00 827-690-11 19.0 50.7 24.5 $62.00 827-722-11 22.2 57.1 28.5 $77.00 827-754-11 25.4 63.5 33.3 $94.00 Order no. R D X Price 1/4” Shank 840-270-11 4.0 28.7 11.5 $41.00 840-350-11 6.35 38.1 17.3 $47.00 1/2” Shank 840-770-11 4.0 28.7 11.5 $41.00 840-850-11 6.35 38.1 17.3 $47.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 990-058-00 Screw for Bearing 1/8W $3.00 Order no. r1 r2 D X Price 1/4” Shank 847-325-11 4.8 3.6 34.2 13 $52.00 1/2” Shank 847-825-11 4.8 3.6 34.2 13 $52.00 Spare Parts 791-002-00 9.5mm bearing $8.00 990-058-00 Screw for Bearing 1/8w $3.00 Order no. R D X H Price 1/4” Shank 838-160-11 1.6 15.9 12.7 12.7 $34.00 838-190-11 3.2 19.1 12.7 12.7 $35.00 838-222-11 4.75 22.2 12.7 12.7 $37.00 838-254-11 6.35 25.4 12.7 12.7 $39.00 838-285-11 7.95 28.6 12.7 12.7 $39.00 838-317-11 9.5 31.7 14.0 12.7 $45.00 838-380-11 12.7 38.1 19.0 12.7 $51.00 838-445-11 15.9 44.5 22.2 12.7 $61.00 1/2” Shank 838-754-11 6.35 25.4 12.7 12.7 $40.00 838-817-11 9.5 31.7 14.0 12.7 $46.00 838-880-11 12.7 38.1 19.0 12.7 $53.00 838-945-11 15.9 44.5 22.2 12.7 $62.00 838-990-11 19.0 50.7 25.4 12.7 $66.00 838-991-11 22.2 57.1 28.5 12.7 $88.00 838-992-11 25.4 63.5 33.3 12.7 $108.00 838-993-11 28.6 76.2 38.1 19.0 $150.00 838-994-11 31.75 82.5 44.4 19.0 $152.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 791-004-00 19mm bearing $7.00 990-058-00 Screw 1/8”W suit 3/4” $3.00 Order no. R D X Price 1/4” Shank 839-160-11 1.6 15.9 12.7 $37.00 839-190-11 3.2 19.1 12.7 $36.00 839-222-11 4.75 22.2 12.7 $39.00 839-254-11 6.35 25.4 12.7 $41.00 839-285-11 7.95 28.6 12.7 $44.00 839-317-11 9.5 31.7 14.0 $48.00 839-380-11 12.7 38.1 19.0 $52.00 839-445-11 15.9 44.5 22.2 $67.00 1/2” Shank 839-754-11 6.35 25.4 12.7 $40.00 839-817-11 9.5 31.7 14.0 $48.00 839-880-11 12.7 38.1 19.0 $55.00 839-945-11 15.9 44.5 22.2 $66.00 839-990-11 19.0 50.7 25.4 $66.00 839-991-11 22.2 57.1 28.5 $94.00 839-992-11 25.4 63.5 33.3 $101.00 Spare Parts 791-002-00 9.5mm Bearing $8.00 990-058-00 Screw 1/8”W $3.00 Order no. r D X Price 1/4” SHANK 841-285-11 4.0 33.4 13.0 $45.00 841-380-11 6.35 42.8 18.5 $53.00 1/2” SHANK 841-785-11 4.0 33.4 13.0 $45.00 841-880-11 6.35 42.8 18.5 $53.00 SPARE PARTS: 791-003-00 12.7mm Bearing $6.00 990-058-00 Screw for Bearing 1/8w $2.00 Order no. r1 r2 D X Price 1/4” Shank 846-325-11 4.8 3.6 34.2 13 $49.00 1/2” Shank 846-825-11 4.8 3.6 34.2 13 $49.00 Spare Parts 791-002-00 9.5mm bearing $7.00 990-058-00 Screw for Bearing 1/8w $3.00 Order no. A D X Price 1/4” Shank 836-130-11 15.0 19.0 12.7 $31.00 836-190-11 25.0 22.2 12.7 $32.00 836-280-11 45.0 31.7 11.5 $34.00 836-420-11 45.0 45.0 18.0 $44.00 1/2” Shank 857-502-11 22.5 31.0 22.2 $46.00 857-501-11 30.0 31.0 22.2 $51.00 836-920-11 45.0 45.0 18.0 $51.00 836-950-11 45.0 65.0 26.0 $73.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 990-058-00 Screw for Bearing 1/8W $3.00 Order no. D X A Price 1/2” Shank 855-506-11 44.4 22 45° $188.00
  • 105. TM Routing, Saw Blades & Accessories 103CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM CMTTM COVE BIT WITH BALL BEARING GUIDE X D 12.7mm R CMTTM MOULDING BITS WITH BALL BEARING GUIDE X D A. B. X D X D C. CMTTM BULL NOSE BIT D X r CMTTM DRAWER FRONT BIT WITH BALL BEARING GUIDE D Didn’t find the router bit you wanted? Search online at www.carbatec.com.au for the full range. Ideal for making edge moulds with a traditional profile. Cut a standard cove with a subtle top fillet or adjust the height to get just a cove. CMTTM CAVETTO EDGE MOULD BIT WITHBALL BEARING GUIDE X D R CMTTM CAVETTO EDGE MOULD BIT WITH BALL BEARING GUIDE CMTTM MOULDING SYSTEM BIT A. B. CMTTM MULTI-PROFILE BIT Cut an endless number of classic profiles with the CMT multi-profile bit. Vary the position of the fence and the number of passes and you can obtain almost any moulding or decorative edge. A. B. Mill beautiful tradi- tional beads and edge beads or turn old beads into new molding with the CMT corner beading bits with bearings. With ball bearing guide. Series 864 bits can be converted to series 863 bits by changing he 9.5mm bearing to 12.7mm bearing (and vice versa). D D X X D D X X X D R CMTTM CORNER BEADING BIT WITH BALL BEARING GUIDE. X D R Order no. R D X Price 1/4” Shank 837-190-11 4.75 22.2 12.7 $33.00 837-222-11 6.35 25.4 12.7 $37.00 837-254-11 7.95 28.6 12.7 $37.00 837-286-11 9.5 31.7 12.7 $44.00 837-350-11 12.7 38.1 15.5 $48.00 1/2” Shank 837-690-11 4.75 22.2 12.7 $35.00 837-722-11 6.35 25.4 12.7 $38.00 837-754-11 7.95 28.6 12.7 $41.00 837-786-11 9.5 31.7 12.7 $42.00 837-850-11 12.7 38.1 15.5 $48.00 837-950-11 15.9 44.5 18.5 $57.00 837-951-11 19.0 50.7 22.2 $69.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 990-058-00 Screw for Bearing 1/8W $3.00 Order no. D X Price 1/2” Shank A. 855-901-11 23.8 35.0 $62.00 B. 855-902-11 27.0 41.0 $62.00 C. 856-501-11 47.5 28.5 $73.00 Spare Parts 791-003-00 12.7mm bearing $7.00 990-058-00 Screw 1/8”W $3.00 Order no. R D X Price 1/4” Shank 854-002-11 3.2 22.2 19.0 $37.00 854-003-11 4.75 25.4 22.2 $41.00 854-004-11 6.35 28.6 25.4 $44.00 1/2” Shank 854-502-11 3.2 22.2 19.0 $37.00 854-503-11 4.75 25.4 22.2 $41.00 854-504-11 6.35 28.6 25.4 $48.00 854-507-11 9.5 34.9 34.9 $62.00 854-509-11 12.7 44.5 41.2 $73.00 Order no. D X Price 1/2” Shank 837-955-11 50.8 12.7 $59.00 SPARE PARTS: 791-003-00 12.7mm Bearing $6.00 990-058-00 Screw 1/8w $2.00 Order no. r D X Price 1/4” SHANK 863-048-11 4.8 25.4 11.5 $39.00 863-080-11 8.0 31.7 14.3 $44.00 1/2” SHANK 863-548-11 4.8 25.4 11.5 $42.00 863-580-11 8.0 31.7 14.3 $47.00 SPARE PARTS: 791-003-00 12.7mm Bearing $6.00 990-058-00 Screw for Bearing 1/8w $2.00 Order no. r D X Price 1/4” SHANK 864-048-11 4.8 25.4 11.5 $39.00 864-080-11 8.0 31.7 14.3 $44.00 1/2” SHANK 864-548-11 4.8 25.4 11.5 $42.00 864-580-11 8.0 31.7 14.3 $47.00 SPARE PARTS: 791-002-00 9.5mm Bearing $7.00 990-058-00 Screw for Bearing 1/8w $2.00 Order no. X D Price A. 856-852-11 31.7 23.0 $52.00 B. 856-851-11 31.7 19.0 $52.00 Order no. D X Price A 856-802-11 55.6 47.0 $89.00 B 856-801-11 38.1 28 $69.00 SPARE PARTS: 791-003-00 12.7mm Bearing $6.00 990-058-00 Screw 1/8w $2.00 Order no. R D X Price 1/4” SHANK 861-032-11 3.2 22.2 15.0 $39.00 861-048-11 4.75 25.4 18.6 $45.00 861-064-11 6.35 28.6 22.2 $45.00 1/2” SHANK 861-532-11 3.2 22.2 15.0 $39.00 861-548-11 4.75 25.4 18.6 $45.00 861-564-11 6.35 28.6 22.2 $45.00 SPARE PARTS: 791-003-00 12.7mm Bearing $6.00 990-058-00 Screw for Bearing 1/8w $2.00
  • 106. Routing, Saw Blades & Accessories 104 CMT ORANGE TOOLS - THE ART OF CUTTING CMTTM RAISED PANEL BIT WITH BALL BEARING GUIDE Min Max D Y CMTTM VERTICAL RAISED PANEL BIT Min Max X A B C A. A2. B2. B. C2. C. D. CMTTM RAIL & STILE SET WITH BALL BEARING GUIDE Min Max D A B C D CMTTM FINGER PULL BIT D1 D2 X CMTTM MDF RAISED PANEL BIT A. B. C. CMTTM ONE PIECE RAIL & STILE SET D Min Max CMTTM WINDOW SASH SET D2 Min Max D1 CMTTM FLUTE & BEAD SET An ideal way to make canoe slats and hot tubs. Durable carbide facing stays sharp even after cutting great quantities of stock and the anti kick- back design feature ensures your safety when working. For fluting and beading 6.35mm slats. CMTTM TABLE EDGE & HAND RAIL BIT D r D X Your investment will be well repaid with the variety of decorative profiles you can achieve with these CMT bits. Our table edge bits give perfectly smooth well-proportioned curves to dining and coffee table edges. The rail bits with a 30° bevel edge and a 1/8” bead let you make beautiful and functional hand rails that add an understated touch of class to any architectural setting. CMTTM 3 PIECE ROUTER BIT SET This three bit set includes carefully matched bits that cut a 1/4” x 1/4” tongue. Unlike other tongue and groove sets, these bits offset the tongue to one side of the joint. No other tongue and groove set offers this advantage. 1/2” shank only. CMTTM TONGUE AND GROOVE SET Order no. D Min Max Y Price 1/2” Shank A. 890-501-11 82.5 15 18 7.9 $104.00 B. 890-502-11 82.5 15 18 7.9 $104.00 C. 890-503-11 82.5 15 18 7.0 $104.00 A2. 890-504-11 89.0 18 20 9.5 $115.00 B2. 890-505-11 89.0 18 20 9.5 $115.00 C2. 890-506-11 89.0 18 20 9.5 $115.00 D. 890-507-11 89.0 15 20 9.5 $115.00 Spare Parts 791-003-00 12.7mm Bearing $7.00 990-058-00 Screw for Bearing 1/8W $3.00 Order no. D Min Max Price 1/2” Shank A. 891-501-11 44.4 18.0 22.0 $136.00 B. 891-502-11 44.4 18.0 22.0 $136.00 C. 891-503-11 44.4 18.0 22.0 $136.00 Spare Parts 822-003-11 Slot Cutter $27.00 791-005-00 Bearing 22.0mm $7.00 541-510-00 0.3mm Spacer $3.00 541-517-00 0.5mm Spacer $3.00 Order no. D Min Max X Price 1/2” Shank A. 890-601-11 38 15 18 38 $83.00 B. 890-602-11 38 15 18 38 $83.00 C. 890-603-11 38 15 18 38 $83.00 Order no. D1 D2 X Price 1/2” Shank 855-601-11 47.6 24 28.5 $73.00 Order no. D I r A° Price 1/2” Shank A. 870-501-11 50 14 12 $69.00 B. 870-502-11 50 17 10 $69.00 C. 870-503-11 45 6.4 13.5 3 $73.00 Order no. Style D Min Max Price 1/2” Shank 891-521-11 Ogee 50.8 18 22 $115.00 Spare Parts 791-027-00 28.6mm bearing $9.00 541-002-00 Stop Collar 1/2” $6.00 990-010-00 Screw M5 $3.00 541-551-00 Shield suit M5 Screw $3.00 Order no. D I L S Price 855-801-11 35.0 38.0 28.0 35.0 $136.00 Order no. r D Price 855-701-11 3.2 38.1 $100.00 Order no. Description D X Price 856-601-11 Table Edge 63.5 19.0 $90.00 856-701-11 Hand Rail 35.0 38.0 $79.00 Order no. Price 800-526-11 $146.00 Order no. D H X Price 800-626-11 47.6 19.0 12.7 $83.00 Spare parts 822-364-11 3 Flute Slot Cutter $21.00 791-005-00 22mm bearing $7.00 990-020-00 Bearing Screw $3.00
  • 107. TM Routing, Saw Blades & Accessories 105CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM CMTTM SPINDLE MOULDER REBATE CUTTER HEAD Designed for rebating from both top or bottom, and for all jointing and grooving requirements. Perfect in all materials, but better results are achieved in chipboard, MDF, composites, plas- tics and laminates. Features 4 scoring knives and 2 universal straight knives. CMTTM DOOR MAKING SPINDLE MOULDING SET WITH SAFETY LIMITERS OD ID Max. 690.000 691.000 690.100 691.100 690.099 691.099 690.098 691.098 690.097 691.097 690.096 691.096 690.019 691.019 690.015 691.015 690.014 691.014 690.001 691.001 690.089 691.089 690.017 691.017 690.016 691.016 690.000 691.000 CMTTM GENERAL PURPOSE SPINDLE MOULDING SET WITH SAFETY LIMITERS OD ID Max. Supplied with 40mm cutters and limiters. Supplied with 40mm cutters and limiters. CMTTM SPINDLE MOULDER CUTTER HEAD WITH SAFETY LIMITERS CMT cutter heads giv eyou a perfect execution of all moulding projects, on all types of spindle moulding machines. Fitted with 2 universal straight blades and limiters, and able to accept 40mm or 50mm knives from CMT’s extensive range. CMT FLEXIBLE TEMPLATE FOR CURVED AND ARCHED ROUTING Easy to use on any kind of wooden panels, MDF or chipboard for creating forms, arcs and curved elements easily and rapidly. CMTTM ROUTER COLLET EXTENSION Fit any 1/2” collet router and then extends all 1/2” shank or 1/4” shank router bits. The extension adds 2-1/2” (63mm) to your router bits length. Recommended for router bits with diameters of 40mm or less. Should only be used with variable speed routers. CMTTM COLLET REDUCERS OD ID CMTTM 5 PIECE BORING BIT SET FOR HINGES Used for drilling blind holes on solid wood, wood composites and plastic laminated materials. CARBA-TEC® UNIVERSAL ROUTER BASE PLATE Adapts to most router base plates to allow use of USA style template followers, shown fitted but not included. Template following gives greater accuracy and repeatability. Brass bush not inc. 220g. CMTTM T.C.T. DOWEL DRILLS 10MM SHANK FOR BLIND HOLES 70 30 35 Ø10 Ø10 CMTTM T.C.T. HINGE BORING BITS 57.5 Ø10 26 56.5 D Ø10 69 70 D 26 CMTTM T.C.T. DOWEL DRILLS 10MM SHANK FOR BLIND HOLES 57.5 20 30 D 70 20 43 Ø10 D CMTTM T.C.T. DOWEL DRILLS 10MM SHANK FOR BLIND HOLES Order no. OD ID Max. Price 694-100-30 100 30 50 $230.00 694-100-35 100 35 50 $230.00 Order no. OD ID Max. Price 693-013-01 100 30 50 $399.00 693-013-02 100 35 50 $399.00 Order no. OD ID Max. Price 693-013-04 100 30 50 $399.00 693-013-05 100 35 50 $399.00 Order no. OD ID Max. Price 693-100-30 100 30 50 $220.00 693-100-35 100 35 50 $220.00 Order no. Price CMT1200 $92.00 Order no. Description Price 796-001-00 Suits 1/2” shank bits $41.00 796-001-01 Suits 1/4” shank bits $41.00 Order no. OD ID Price 799-264-00 1/2” 1/4” $10.00 Order no. Price 512-001-01 $163.00 Order no. Price BPA-1 $31.00 Order no.R/H 311-050-11 311-060-11 311-080-11 311-100-11 Order no. L/H D Price 311-050-12 5.0 $20.00 311-060-12 6.0 $20.00 311-080-12 8.0 $20.00 311-100-12 10.0 $24.00 Order no.R/H 317-150-11 317-200-11 317-250-11 317-300-11 317-350-11 Order no. L/H D Price 317-150-12 15.0 $31.00 317-200-12 20.0 $34.00 317-250-12 25.0 $35.00 317-300-12 30.0 $36.00 317-350-12 35.0 $42.00 Order no.R/H 369-150-11 369-200-11 369-250-11 369-300-11 369-350-11 Order no. L/H D Price 369-150-12 15.0 $31.00 369-200-12 20.0 $38.00 369-250-12 25.0 $42.00 369-300-12 30.0 $42.00 369-350-12 35.0 $46.00 Order no.R/H 308-050-11 308-060-11 308-080-11 308-100-11 Order no. L/H D Price 308-050-12 5.0 $19.00 308-060-12 6.0 $19.00 308-080-12 8.0 $20.00 308-100-12 10.0 $21.00 Order no.R/H 309-050-11 309-060-11 309-080-11 309-100-11 Order no. L/H D Price 309-050-12 5.0 $15.00 309-060-12 6.0 $16.00 309-080-12 8.0 $21.00 309-100-12 10.0 $21.00
  • 108. Routing, Saw Blades & Accessories 106 CMT ORANGE TOOLS - THE ART OF CUTTING CMTTM BALL BEARINGS ID OD EXCELLENT Soft wood with nails, screws, concrete etc. EXCELLENT Rip Wood Rip Plywood Cross Plywood Crosscut Wood EXCELLENT Rip Wood FAIR 2-Sided Melamine EXCELLENT Cross Wood Rip Plywood 2-Sided Melamine EXCELLENT 2-Sided Melamine EXCELLENT 2-Sided Melamine Rip Plywood Cross Plywood GOOD Rip Wood Cross Wood EXCELLENT 2-Sided Melamine Cross Wood Cross Plywood GOOD Rip Wood Rip Plywood EXCELLENT 2-Sided Melamine Cross Plywood GOOD Cross Wood EXCELLENT 2-Sided Melamine Cross Wood Cross Plywood D d CMTTM BALL BEARINGS WITH NYLON COVER Order no. OD ID Price 791-002-00 9.5 4.76 $8.00 791-003-00 12.7 4.76 $7.00 791-010-00 12.7 6.35 $7.00 791-018-00 15.8 4.76 $11.00 791-009-00 15.8 6.35 $9.00 791-025-00 15.8 8.00 $8.00 791-019-00 19.0 4.76 $10.00 791-004-00 19.0 6.35 $7.00 791-034-00 19.0 8.00 $18.00 791-011-00 19.0 12.70 $19.00 791-018-00 21.0 5.0 $11.00 791-005-00 22.0 8.00 $7.00 791-017-00 22.2 4.76 $15.00 791-021-00 22.2 9.52 $8.00 791-014-00 28.5 4.76 $15.00 791-030-00 28.5 8.00 $15.00 791-027-00 28.5 12.70 $9.00 791-033-00 31.7 8.00 $15.00 791-015-00 31.7 12.70 $15.00 791-016-00 34.9 4.76 $19.00 791-028-00 37.0 12.00 $10.00 791-020-00 38.1 12.70 $16.00 791-041-00 19.0 4.76 $18.00 Order no. Dia. Z β α Bore K Price CONSTRUCTION BLADE 286-020-12M 300 20 5° 15° 30 2.8 $48.00 Order no. Dia. Z β α Bore K Price RIPPING BLADES 290-250-24M 250 24 10° 20° 30 2.8 $45.00 293-024-12M 300 24 10° 20° 30 2.8 $62.00 Order no. Dia. Z β α Bore K Price COMBINATION BLADES 291-180-24H 180 24 10° 20° 20 2.6 $35.00 292-180-40H 180 40 15° 15° 20 2.6 $41.00 291-235-36L 235 36 15° 15° 25 2.8 $48.00 292-235-48L 235 48 15° 15° 25 2.8 $57.00 285-040-10M 250 40 10° 15° 30 3.2 $55.00 285-048-10M 250 48 10° 15° 30 3.2 $62.00 285-060-10M 250 60 15° 10° 30 3.2 $69.00 285-048-12M 300 48 10° 15° 30 3.2 $79.00 294-054-12M 315 54 15° 15° 30 2.8 $90.00 Order no. Dia. Z β α Bore K Price INDUSTRIAL FINE CUT OFF BLADES TEFLON COATED 210-080-10M 250 80 40° 5° 30 3.2 $104.00 210-096-12M 300 96 40° 5° 30 3.2 $125.00 281-580-10M 250 80 TCG 10° 30 3.2 $104.00 281-696-12M 300 96 TCG 10° 30 3.2 $125.00 Order no. Dia. Z β α Bore K Price FINE CUT OFF BLADES 285-064-08M 200 64 15° 5° 30 3.2 $79.00 285-080-10M 250 80 15° 5° 30 3.2 $90.00 285-580-10M 250 80 15° 10° 30 2.5 $104.00 285-072-12M 300 72 15° 5° 30 3.2 $94.00 285-096-12M 300 96 15° 5° 30 3.2 $115.00 285-596-12M 300 96 15° 10° 30 2.5 $115.00 Order no. Dia. Z β α Bore K Price INDUSTRIAL FINE CUT OFF FOR TWO SIDED MELAMINE 287-042-09M 220 42 H/G 10° 30 3.2 $94.00 Order no. Dia. Z β α Bore K Price MELAMINE & FINISHING BLADES 283-080-10M 250 80 40° -2° 30 3.2 $104.00 283-096-12M 300 96 40° 2° 30 3.2 $121.00 Order no. Dia. Z β α Bore K Price MELAMINE & FINISHING BLADES TRAPEZOIDAL TOOTH 281-080-10M 250 80 T/T 10° 30 3.2 $94.00 281-096-12M 300 96 T/T 10° 30 3.2 $115.00 Order no. OD ID Thick Price SAW BLADE REDUCING WASHERS (BUSHES) 299-221-00 20 12.7 1.2 $5.00 299-222-00 20 16.0 1.2 $5.00 299-211-00 30 15.87 1.4 $5.00 299-223-00 30 16.0 1.4 $5.00 299-226-00 30 16.0 2.0 $5.00 299-224-00 30 20.0 1.4 $5.00 299-227-00 30 20.0 2.0 $5.00 299-225-00 30 25.0 1.4 $5.00 299-228-00 30 25.0 2.0 $5.00 299-212-00 30 25.4 2.0 $5.00 299-229-00 32 30.0 2.0 $5.00 BU-30-58 30 5/8” 2.0 $6.00 Order no. OD ID Price 791-044-00 12.7 5 $15.00 791-045-00 15.87 7.2 $15.00 791-046-00 19.05 6.8 $15.00
  • 109. TM Routing, Saw Blades & Accessories 107CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! TM EXCELLENT Rip Wood Cross Wood GOOD EXCELLENT Cross Wood Rip/Cross Plywood EXCELLENT Rip/Cross Plywood 2-Sided Melamine Cross Wood EXCELLENT Non-ferrous Metals & PVC 2-Sided Melamine ARCHERTM HSS ROUTER BIT SET 10pce HSS router bits. 3.2mm shanks. Suitable for use in Dremel style tools. ROSETTE CUTTER 70MM DIAMETER. Milled from a solid steel blank, this carbide tipped 1/2” shank rosette cutter makes crisp rosettes in most hardwoods and softwoods. Note: Not for use in router. Designed for use in a drill press only. CARBA-TEC® 12 PIECE ROUTER BIT SET A selection of commonly utilised router bits. Some of these include straight, chamfer, roundover, and slot cutting bits all with 1/2” shanks. SPIRAL UPCUT STARTER SET Set includes three solid micrograin carbide bits that cut quickly and smoothly with a long-life cutting edge. These upcut spiral bits produce a clean and accurate cut with minimal chat- ter. Includes 1/4”, 3/8” and 1/2” diameters. INLAY KIT Make the pattern and route around the template. Then fit the larger collar over the bush and trace the template. This will leave a recess for the in- lay . If you’ve done it correctly the inlay or repair piece will fit perfectly. Supplied with router bit. 90g. SOLID BRASS ROUTER BUSHING SET Set includes 8 bushes to suit router bases with 30mm hole. Outside diameters include: 5/16” 3/8”, 7/16”, 1/2”, 39/64”, 13/16”, 1” and 1-3/8”.480g. PLANING BIT High quality two flute cutter. Ideal for planing op- erations. Tung- sten tipped. B C A LASER POINT BIT Used by sign makers for carving fine details. Its also used by furniture makers when wanting to add fine detail. Extreme care needs to be taken with this fine tipped bit as tungsten carbide is fragile and the tip can be easily damaged. Order no. Dia. Z β α Bore K Price ULTRA ITK COMBINATION BLADES THIN KERF - TRIPLE CUT 271-250-24M 250 24 15° 20° 30 1.7 $58.00 271-250-42M 250 42 15° 20° 30 1.7 $69.00 271-300-45M 300 45 15° 20° 30 2.4 $83.00 ULTRA ITK FINE CUT OFF BLADES THIN KERF - TRIPLE CUT 272-250-60M 250 60 15° 20° 30 1.7 $83.00 272-300-72M 300 72 15° 20° 30 2.4 $100.00 ULTRA ITK MELAMINE & FINISHING BLADES - THIN KERF 273-250-80M 250 80 40° 15° 30 1.7 $102.00 273-300-96M 300 96 40° 15° 30 2.4 $125.00 Order no. Dia. Z β α Bore K Price NON-FERROUS METAL CUTTING BLADE 296-180-40H 180 40 -6° 20 2.8 $44.00 296-235-48M 235 48 -6° 30 2.8 $58.00 297-080-10M 250 80 45° -6° 30 2.8 $80.00 297-096-12M 300 96 45° -6° 30 2.8 $100.00 Order no. Dia. Z Grind Kerf Bore Price PRECISION DADO BLADE 230-520-06 150 20 - 6.35-23.0 - $205.00 230-524-08 200 24 -5° 6.35-23.0 5/8” $230.00 230-524-08M 200 24 -5° 6.35-23.0 30mm $230.00 Order no. Dia. Z Grind Kerf Bore Price LOW NOISE CHROME COATED 281-680-10M 250 80 TCG 3.2 30mm $104.00 281-672-12M 300 72 TCG 3.2 30mm $104.00 285-640-10M 250 40 10” ATB 3.2 30mm $62.00 285-648-12M 300 54 10” ATB 3.2 30mm $87.00 Order no. Dia. Z β α Bore K Price SCRIBING BLADES 289-100-20H 100 10+10 Flat - 20 2.8- 3.6 $115.00 289-120-24H 120 12+12 Flat - 20 2.8- 3.6 $115.00 289-120-24K 120 12+12 Flat - 22 2.8- 3.6 $115.00 Order no. Price DR-10 $41.00 Order no. Price 731505 $117.00 Order no. Price CT-1212PCE $55.00 Order no. Price SRB-200 $121.00 Order no. Price BIK-30 $47.00 Order no. Price RM-9 $42.00 Order no. A (mm) B (mm) C (mm) Price 7942 38.1 50.00 12.7 $36.00 Order no. D A° Shank Price CT-0422 6.35 22° 6.35mm $13.00
  • 110. Routing, Saw Blades & Accessories 108 CMT ORANGE TOOLS - THE ART OF CUTTING X Denotes extra long cutting length - are not guaranteed against breakage. FLUSH TRIM & PATTERN FOLLOWING BITS With bearing guide, tung- sten tipped, two flutes. B C A C BRASS PILOTED ROUNDOVER BITS B ROUNDOVER BITS With bearing guide. Tungsten tipped, two flute. B R C R 12.7MM SHANK. STRAIGHT BITS Tungsten tipped, two flute. 6.35MM SHANK. STRAIGHT BITS. Tungsten tipped, two flute. X Denotes extra long cutting length - are not guaranteed against breakage. DOWN SHEAR FLUSH TRIM BITS Downward shear cutting action virtually elim- inates any chipping or splintering on the top surface of the workpiece even when the job requires fast cuts in delicate materials. GROOVING, MOULDING AND BEADING BITS Ideal for rope or barley sugar carving on turned legs. All measurements in mm. BARLEY TWIST BITS These bits are the perfect way to create features on turned posts or to create that highlight feature on a furniture leg. Varying the depth will give heaps of variety to any piece. The cutting tip comes to a sharp point so finer details are easy to achieve. DOUBLE OGEE BIT With bearing guide. Tungsten tipped. Two flute. CLASSICAL OGEE BIT With bearing guide. Tungsten tipped. Two flute. 12.7mm shank. PANEL RAISING BITS With bearing guide. Tungsten tipped. Two flute. Note: Extra care and lower rpm should be used with these blades due to large di- ameter. THREE WING PANEL RAISING CUTTERS Traditional panel raising bits only have 2 cut- ting edges. The added cutting edge and body mass behind the cutter on these bits make for smoother cutting and less tear out. Think of them as miniature spindle moulder cutters. These cutters MUST be used in a variable speed router and run at LESS THAN 12,000rpm. They are designed for router ta- ble use ONLY. PATTERN FOLLOWING BIT Order no. A (mm) B (mm) C (mm) Price CT-151007 6.35 25.4 6.35 $13.00 CT-8012B 9.5 25.4 6.35 $18.00 CT-8016B 12.7 25.4 6.35 $18.00 CT-8016B-1/2 12.7 25.4 12.7 $18.00 CT-X8016B-1/2 12.7 38.0 12.7 $19.00 CT-X8035B-1/2 22.0. 35.0 12.7 $30.00 Order no. A (mm) B (mm) R (mm) Price 331011 8.0 9.5 1.6 $23.00 331021 11.0 9.5 3.2 $23.00 Order no. B (mm) C (mm) R (mm) Price CT-504B 12.7 6.35 3.2 $22.00 CT-506B 12.7 6.35 5.0 $23.00 CT-508B 12.7 6.35 6.35 $25.00 CT-510B 12.7 6.35 8.0 $27.00 CT-512B 16.0 6.35 9.5 $32.00 CT-516B 19.0 6.35 12.7 $39.00 CT-512B-1/2 16.0 12.7 9.5 $32.00 CT-516B-1/2 19.0 12.7 12.7 $39.00 CT-520B-1/2 22.2 12.7 16.0 $42.00 CT-524B-1/2 25.4 12.7 19.0 $49.00 CT-532B-1/2 31.8 12.7 25.4 $68.00 Order no. Cutting Dia. Cutting Length Shank Dia. Price CT-1406M 6.0 16.0 12.7 $13.00 CT-1408 6.35 16.0 12.7 $13.00 CT-1410 7.9 19.0 12.7 $13.00 CT-1412 9.5 25.4 12.7 $13.00 CT-1410M 10.0 25.4 12.7 $15.00 CT-1414 11.1 31.8 12.7 $15.00 CT-1412M 12.0 31.8 12.7 $15.00 CT-1416 12.7 31.8 12.7 $15.00 CT-X1416 12.7 50.8 12.7 $19.00 CT-X1413M 13.0 50.8 12.7 $21.00 CT-1416M 16.0 38.1 12.7 $21.00 CT-X1416M 16.0 50.8 12.7 $21.00 CT-1417M 17.0 38.1 12.7 $25.00 CT-X1418M 18.0 50.8 12.7 $25.00 CT-X1419M 19.0 50.8 12.7 $25.00 CT-1424 19.0 38.1 12.7 $25.00 CT-1432 25.4 38.1 12.7 $27.00 Order no. Cutting Dia.(mm) Cutting Length (mm) Shank Dia.(mm) Price 107011 2.4 12.7 6.35 $19.00 107021 3.2 12.7 6.35 $20.00 107031 4.0 12.7 6.35 $21.00 107039 4.8 12.7 6.35 $22.00 CT-208 6.35 16.0 6.35 $13.00 CT-X208 6.35 25.4 6.35 $13.00 CT-210 7.9 19.0 6.35 $13.00 CT-210M 10.0 19.0 6.35 $13.00 CT-X212 9.5 25.4 6.35 $13.00 CT-X216 12.7 25.4 6.35 $15.00 CT-224 19.0 19.0 6.35 $19.00 Order no. A (mm) B (mm) Shank Price 151411A 12.7 12.7 12.7 $17.00 151421A 12.7 25.4 12.7 $17.00 151441A 12.7 32.0 12.7 $17.00 151487A 19.0 38.0 12.7 $32.00 151489A 19.0 50.8 12.7 $38.00 Order no. A (mm) C D R1 Price PR-4 10 6.35 2 4 $18.00 Order no. Dia. Rad Shank Price CT-0402 6.35 3.2 6.35 $15.00 CT-0602 9.5 4.75 6.35 $17.00 CT-0715 12.7 6.35 12.7 $20.00 CT-1205 19.0 9.5 12.7 $25.00 CT-1605 25.4 12.7 12.7 $29.00 Order no. A B C R Price 314411 32.0 14.3 12.7 3.2 $40.00 Order no. Price CFPC-04 $40.00 Order no. Dia. Shank Price CTOG-57B-1/2 57.0 12.7 $74.00 CTOG-90B-1/2 90.0 12.7 $74.00 Order no. Dia. Shank Price CT-5825 85.7 12.7 $107.00 CT-5875 85.7 12.7 $107.00 Order no. Price 152007 $17.00
  • 111. Routing, Saw Blades & Accessories 109Want to see more? See our website for our full range of products. BISCUIT JOINING SET Set includes bearings (22mm, 26mm, 30mm) to vary the depth of cut to suit popular size biscuits SOLID EDGE SET This set allows you to put solid wood edging on plywood or MDF quickly and easily. 1/2” Shank. 2 PIECE MATCHING OGEE RAIL & STILE SET C B D A LOCK MITRE BITS Shank diameter 12.7mm. TONGUE AND GROOVE BITS Tungsten tipped. Two flute. One router bit cuts both sides of the board without having to adjust the bit height. Just turn board over. CTGB-50 and CTGB-100 can also be used as drawer joint bits. CTGB-50 CTGB-100 CTGB-143 FACE MOULDING BIT Tungsten tipped, two flutes, 1/2” shank. Includes bearing guide. FACE MOULDING BIT Tungsten tipped, two flutes, 1/2” shank. Includes bearing guide. FACE MOULDING BIT Tungsten tipped, two flutes, 1/2” shank. Includes bearing guide. FACE MOULDING BIT Tungsten tipped, two flutes, 1/2” shank. Includes bearing guide. PICTURE FRAMING BITS Use these classic bits to produce profes- sional looking picture frames. All bits have 1.2” shank. TONGUE & GROOVE “V” JOINT CUTTER This single cutter set makes the grooved edge. Simply replace the middle cutter with the bush- ing supplied to make the tongue edge. Great for panelling. Suitable for 12.7mm to 19mm timber. Comes with 12.7mm shank. TABLE EDGE BIT With bearing guide. Tungsten tipped. Two flute. 12.7mm shank. Note: Changing bearing to smaller diameter (optional B9B bearing) will leave small step at bottom of profile. 2 PIECE MATCHING CLASSICAL DOOR MAKING SET This two piece set is one of the most versatile router tools available. The large heavy duty bearing on the stile cutter allows you to fabricate raised panel doors of limitless shapes, from 13-27mm in thickness. A must for the serious woodworker or cabinetmaker. Order no. Description Price 705921 Set with 1/4” Shank $55.00 705941 Set with 1/2” Shank $55.00 Order no. Price CT-7733 $118.00 Order no. A (mm) B (mm) C (mm) D (mm) Price CT-0201 41.0 25.4 12.7 38.0 $79.00 Order no. Board Thick. Dia. Price CTML-38-1/2 9.5-16mm 38mm $59.00 CTML-70-1/2 12-28mm 70mm $71.00 Order no. Board Thickness Shank Price CTGB-50 12mm to 25mm 6.35mm $38.00 CTGB-100 12mm to 25mm 12.7mm $42.00 CTGB-143 14mm to 43mm 12.7mm $45.00 Order no. Price CFMC-07 $64.00 Order no. Price CFMC-03 $40.00 Order no. Price CFMC-16 $78.00 Order no. Price CFMC-05 $45.00 Order no. A B Shank Price CT-0105 30.2 66.7 12.7 $42.00 CT-0205 19.0 57.1 12.7 $32.00 CT-0305 36.5 75.2 12.7 $49.00 CT-0405 25.4 63.5 12.7 $42.00 CT-0505 30.2 68.3 12.7 $42.00 Order no. Price CTGV-04 $71.00 Order no. Price CTN-01 $61.00 Order no. Amm Bmm Cmm Dmm Rmm Price CTPD-SET 53 28 12.7 50 7 $113.00
  • 112. Drilling & Boring 110 For more information & to shop online go to www.carbatec.com.au CMTTM BRAD POINT WOOD DRILL SET Hardened carbon steel, made in Ger- many. These bits have the finest cut- ting edges you will ever use, and range from 3mm to 10mm. 280g. CMTTM BRAD POINT DRILLS HIGH SPEED STEEL 2 FLUTES COLT TWINLAND BRAD POINT DRILLS Available in two sets, these bits are made from quality HSS and are designed for value. Double flute design cuts faster and cleaner reducing blow out. Five piece set includes 4, 5, 6, 8 & 10mm drills. Eight piece set includes 3, 4, 5, 6, 7, 8, 9 & 10mm drills. 170 PIECE TITANIUM NITRIDE DRILL BIT CASSETTE Titanium nitride is a very hard coating that extends the length of time between sharpen- ings. Set contains 170 quality hss titanium nitride coated drill bits in the following sizes; 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm 7.0mm, 7.5mm, 8.0mm, 8.5mm 9.0mm, 9.5mm, 10mm. 4.1kg. HIGH SPEED STEEL DRILL SET Highest qual- ity set contains drills from 1 to 10mm in 1/2mm steps. 710g. COLT PRO BRAD POINT DRILLS Available in two sets, these bits are made from hiqh quality HSS and are designed to cut. Double flute design cuts faster and cleaner reducing blow out. Five piece drill set includes; 4, 5, 6, 8 & 10mm drills. Seven piece drill set includes; 3, 4, 5, 6, 7, 8, 9 & 10mm drills. VIX STYLE BITS Speedy, accurate drilling tool with self-cen- tring abilities. Saves time drilling holes for hinges and striker plates. Outer casing re- tracts when VIX BIT is inserted into counter- sunk hole, drill bit is then located in the cen- tre of the countersunk hole. These bits make precise positioning of all hardware a breeze. COLT BORING TOOLS Made in Germany, Colt drills are made for professional results everytime. We know that you can buy drills cheaper but Mie- bach delivers quality and value that is un- paralleled. Try a set and you will agree. 21 PIECE METRIC BRAD POINT BIT SET Made from HSS and titanium nitride coated. Set includes 21 brad point drills from 3 to 13mm in 0.5mm steps. 1.3kg. PLASTIC DRILL STOPS This pair of stops fits all drill bits from 3mm -13mm. The smaller one takes bits from 3mm-6mm, and the larger takes 6mm-13mm bits. De- signed with double-ended collets inside threaded sleeves. Made in USA. 30g. 13 PIECE BRAD POINT DRILL SET Tungsten carbide tipped with centre point and spurs, these high quality bits give a clean cut in wood. Ideal for doweling or any drilling that requires fast, clean cutting. This 13 piece deluxe set comes in a handy wooden storage case, and unlike other sets selling for about $30, this one contains all of the popular sizes, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 13/32”, 7/16”, 15/32” and 1/2”. 550g. SPIRAL PUSH DRILL Accepts drill bits from 0.3 to 1.6mm. Unlike every other one of these that we have tested this one runs straight and is a delight to use. Can be oper- ated with one or two hands. Overall length: 195mm. 65g. Order no. Price 517-002-00 $20.00 Order no. Dia. Length Shank Price 516-020-51 2mm 49mm 2mm $9.00 516-025-51 2.5mm 57mm 2.5mm $9.00 516-030-51 3mm 61mm 3mm $9.00 516-035-51 3.5mm 70mm 3.5mm $10.00 516-040-51 4mm 75mm 4mm $11.00 516-045-51 4.5mm 80mm 4.5mm $12.00 516-050-51 5mm 86mm 5mm $13.00 516-055-51 5.5mm 93mm 5.5mm $13.00 516-060-51 6mm 93mm 6mm $15.00 516-070-51 7mm 109mm 7mm $16.00 516-080-51 8mm 117mm 8mm $17.00 516-090-51 9mm 125mm 9mm $23.00 516-100-51 10mm 133mm 10mm $27.00 Order no. Description Price COLT-10700410 5 Piece Set $12.00 COLT-10700310 8 Piece Set $19.00 Order no. Price BDK-170T $88.00 Order no. Price SCT-009 $55.00 Order no. Description Price COLT-10600410 5 Piece set $35.00 COLT-10600412 7 Piece set $75.00 Order no. Description Price VB-3 For #3 & #4 screws $17.00 VB-5 For #5 & #6 screws $17.00 VB-9 For #8 #9 & #10 screws $17.00 Order no. Price BPD-21PCE $88.00 Order no. Price 86K65-01 $8.00 Order no. Price BPD-13 $44.00 Order no. Price CT-191440 $16.00
  • 113. Drilling & Boring 111Want to see more? See our website for our full range of products. EXPANDING BIT Easy, positive adjustment for hole diameter (22 - 76mm). Fully heat treated for longer life. For use in drill presses only. 210g. Made in Japan. VERITAS® SET OF 7 AUGER GIMLETS Ideal for starting screws, auger gimlets have a tapered screw tip and an auger body. The seven sizes in the set range from 5/64” to just over 3/16” (2mm to 5mm), which will handle the pre-drill for screw sizes #2 to #9. They are particularly useful for short screws or screws in awkward places, both of which present problems for power pre-drilling. In tempered steel, ferro-blacked in the tradi- tional manner. 6 PIECE SPADE SET IN NYLON ROLL This handy set of 6 spade bits have hex shanks. Presented in a nylon roll for con- venient storage. Set includes 10, 12, 16, 18, 20 and 25mm spade bits. Excellent value. 275g. MAXICUT FORSTNER BITS The one of a kind Rota Stop system give a firm and positive lock in your chuck or exten- sion as well as a quick release. This rock solid holding feature equals more accurate work. Designed to cut instead of grind these bits are well worth the price difference. Coupled with the MAXICUT extension, shown below, these bits can also be used in lathes when drilling on end grain. Set includes: 15, 20, 25, 30 and 35mm. Made in Germany. 750g. 10 PIECE MICRO DRILL SET All with 2.3mm shanks. Sizes include: 0.5, 0.6, 0.8, 1.0, 1.2, 1.3, 1.5, 1.6, 2.0 and 2.2mm. 30g. 20 PIECE MICRO DRILL SET Set includes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.2, 1.3, 1.4, 1.5 and 1.6mm. 40g. 5 PIECE TILE DRILL SET This fantastic set give you all of the sizes needed to drill tile or ceramic mate- rial. Save by purchasing as a set. Spade shaped drills work quickly and ef- fectively. Set includes: 4, 5, 6, 8 and 10mm bits. 145g. SMALL & LARGE REAMERS The small r e a m e r (3/16” to 3/4”) is use- ful to rus- tic furniture makers for back-tapering holes for through- tenon wedging (see diagram), as well as for general tenon tapering, being complemen- tary to our pro taper reamer (05J61-01) be- cause of the overlapping size range. First- time Windsor chairmakers will find the large reamer (3/16” to 1-3/16”) indispensable for tapering leg sockets. The bits are 3-3/8” and 5-1/2” overall respectively with a 5/16” hex shank. The included angle of 12.8° on both reamer bodies matches the tenons made with the Veritas® Tapered Tenon Cutters. De- signed for use in an electric drill, these tools may also be used in a traditional brace with an adapter. CHUCK EXTENDER Hand drills are convenient but often are lim- ited in use because the bulk of the drill body interferes with their utility. This 14” chuck extender with 3/8” capacity keyed chuck makes it possible to do many more things with a hand drill. With it you can drill (or drive screws) in areas that would normally be un- reachable. It also allows you to use a number of accessories that would be unmanageable if chucked directly in a drill. KREG SHELF PIN JIG If you’re adding shelf pin holes to an exist- ing piece of furniture or building shelves from scratch, this Jig is the perfect tool for the job. Unlike other shelf pin guides, the Kreg Shelf Pin Jig features hardened steel drill guides which ensure precise and straight drilling, so you get solid 4-corner secure shelving. Order no. Price Z-2052 $55.00 Order no. Price 33J20-01 $20.00 Order no. Price SPADE-6NR $17.00 Order no. Price COLT-10801535 5 Set $169.00 COLT-10800100 1MT Rota Stop Ext. $59.00 COLT-10800200 2MT Rota Stop Ext. $59.00 Order no. Price MDS-10PCE $14.00 Order no. Price MDS-20PCE $14.00 Order no. Price GTD-5PCE $31.00 Order no. Description Price 05J62-05 Small $21.00 05J62-01 Large $25.00 Order no. Price 09A01-60 $26.00 Order no. Price KR-KMA3200 $47.00
  • 114. Drilling & Boring 112 For more information & to shop online go to www.carbatec.com.au 5 PIECE BIT SET (METRIC) Set includes 15mm, 20mm, 25mm, 30mm, and 35mm bits. 630g. 16 PIECE SAW TOOTH BIT SET (IMPERIAL) This 16 piece set of saw tooth and bits comes in a blow moulded case and contains 1/4” to 7/8” bits in 1/8” increments. Also in the set are 1” to 21/8” saw tooth bits in 1/8” increments. 2.56kg. 16 PIECE SAW TOOTH BIT SET (METRIC) This 16 piece set of forstner style bits comes in a blow moulded case and contains 6, 10, 13, 16, 19, 22, 25, 28, 32, 35, 38, 41, 44, 48, 51, and 54mm forstner style bits. 2.56kg. INDIVIDUAL FORSTNER STYLE BITS Sawtooth rim bits are more suitable for end grain work but produce more tearout. Smooth rimmed bits are more suitable for cross grain work and produce minimal tearout. 24 PIECE COMBINATION SET This set is every woodworkers dream. It con- tains 6 Forstner style bits ranging from 1/4” to 7/8” in 1/8” increments. It also has 18 saw tooth bits ranging from 1” to 31/8” in 1/8” in- crements. 7.7kg. 16 PIECE FORSTNER BIT SET (IMPERIAL) This 16 piece set of forstner style bits comes in a blow moulded case and contains 1/4” to 21/8” in 1/8” increments. 2.56kg. 16 PIECE FORSTNER BIT SET (METRIC) This 16 piece set of forstner style bits comes in a blow moulded case and contains 6, 10, 13, 16, 19, 22, 25, 28, 32, 35, 38, 41, 44, 48, 51, and 54mm forstner style bits. 2.56kg. CMTTM TCT FORSTNER STYLE BITS Precision balanced centre point, shank 10 x 60mm, L=90mm, *Shank =10 x 50mm. TRADITIONAL CARBON STEEL FORSTNER STYLE BITS Forstner style bits are more suited to drilling cross grain and give far less entry damage and exit damage at the edge of the hole. TRADITIONAL CARBON STEEL METRIC FORSTNER STYLE BITS TRADITIONAL CARBON STEEL FORSTNER STYLE BITS Saw tooth bits are suited to drilling holes on end grain as in lathe work. Their serrated edge bites more aggressively than forstner bits, giving slightly more entry and exit dam- age than forstner bits. CARBA-TEC® FORSTNER BIT EXTENSION Extends bits by 160mm. Suits forstner style bits with 8mm, 5/16”, 3/8” and 10mm shanks. 360g. Example of bit attached Order no. Price FSB-5PCE-M $21.00 Order no. Price STB-16PCE $57.00 Order no. Price STB-16PCE-M $57.00 Order no. Price STB-24PCE $110.00 Order no. Price FSB-16PCE $57.00 Order no. Price FSB-16PCE-M $57.00 Order no. Diameter (mm) Price 512-150-11 15 $33.00 512-160-11 16 $33.00 512-180-11 18 $33.00 512-200-11 20 $33.00 512-220-11 22 $37.00 512-240-11 24 $37.00 512-250-11 25 $37.00 512-260-11 26 $38.00 512-280-11 28 $40.00 512-300-11 30 $40.00 512-320-11 32 $40.00 512-340-11 34 $40.00 512-350-11 35 $40.00 512-380-11 38 $45.00 512-400-11 40 $47.00 512-450-11 45* $57.00 512-480-11 48* $67.00 512-500-11 50* $67.00 Order no. Size Weight Price FSB-38 3/8” 40g $10.00 FSB-12 1/2” 40g $11.00 FSB-58 5/8” 40g $11.00 FSB-34 3/4” 60g $11.00 FSB-1 1” 80g $12.00 FSB-112 1-1/2” 160g $14.00 Order no. Size Weight Price FSB-6MM 6mm 40g $8.00 FSB-8MM 8mm 40g $8.00 FSB-10MM 10mm 40g $10.00 FSB-12MM 12mm 40g $10.00 FSB-13MM 13mm 40g $11.00 FSB-15MM 15mm 60g $11.00 FSB-16MM 16mm 60g $11.00 FSB-18MM 18mm 60g $11.00 FSB-19MM 19mm 60g $11.00 FSB-20MM 20mm 70g $11.00 FSB-22MM 22mm 70g $12.00 FSB-24MM 24mm 80g $13.00 FSB-25MM 25mm 90g $13.00 FSB-26MM 26mm 70g $13.00 FSB-32MM 32mm 135g $14.00 FSB-35MM 35mm 140g $14.00 FSB-40MM 40mm 180g $16.00 FSB-45MM 45mm 190g $16.00 FSB-50MM 50mm 210g $23.00 Order no. Size Weight Price STB-178 1-7/8” 170g $16.00 STB-2 2” 190g $17.00 STB-218 2-1/8” 180g $17.00 STB-214 2-1/4” 370g $18.00 STB-238 2-3/8” 405g $18.00 STB-212 2-1/2” 440g $21.00 STB-3 3” 590g $32.00 STB-318 3-1/8” 650g $33.00 Order no. Price EXTN-1 $20.00
  • 115. Drilling & Boring 113Want to see more? See our website for our full range of products. 6 PIECE PLUG CUTTER SET Set includes the following sizes: 3/8”, 1/2”, 5/8” 3/4”, 7/8” and 1” plug cutters. Cuts plugs up to 50mm in length. 920g. DRILL & BARREL PLUG CUTTER SETS Cuts perfect plugs up to 50mm in length and bores the matching plug holes. Set A includes the following sizes: 15, 20, 25 & 30mm. Set B includes the following sizes: 8, 10, 12 & 15mm. When using barrel plug cutters the swarf should be cleared regularly by rais- ing the drill press handle. This avoids overstressing and potentially breaking the plug cutter. Only for use in drill presses. 8 PIECE PLUG CUTTER SET Set includes two types of plug cutters, i.e., plug counterbores used for screws, etc. Sizes in- clude: 1/4”, 3/8”, 1/2” and 5/8”. Plug lengths vary between 9 and 18mm 275g. A. B. HIGH SPEED TAPER POINT DRILLS FOR USE WITH TYPE C COUNTERSINKS To cut wood and plastics in one operation for the thread and shank of wood screws. Will fit all types of countersinks and counterbores. W.L. FULLER TYPE ‘C’ COUNTERSINKS GENERAL PURPOSE PLUG CUTTERS Designed for clean cutting and hardened for long life. These four- bladed Plug Cutters do not eject the plugs, the plug remains in the board and can be broken out with a chisel or the board can be sawed to free the plug. The tool cuts fast and makes a smooth chamfered plug for easy starting in the counterbored hole. Blades can be opened for larger, or closed for slightly smaller diameter plugs. HARDWOOD PLUG CUTTERS STOP COLLARS. TO SUIT TYPE ‘C’ COUNTERSINKS W.F. FULLER COUNTERSINK SET The finest quality set of counter sink bits you will ever use. Made in the U.S.A., this set is present- ed in a handsome, hard- wood case, and includes 1 x 3/8” and 1 x 1/2” plug cutter, 2 stop collars and 5 counter- sink bits to suit wood screw sizes 6, 8, 10, 12 and 14. Drill bits are tapered to facilitate screw gripping. 700g. CMT UNIVERSAL BORING JIG Designed for drilling precise 32mm Euro-style spacing in fur- niture elements or carcasses. Suitable for shelf supports with a diameter of 3mm or 5mm and for boring and marking holes for the most popular hinge brands. View our full range of drilling and boring . accessories and shop online at www.carbatec.com.au Order no. Price A. PSG-8PCE-L $73.00 B. PSG-8PCE-S $62.00 Order no. Drill Dia. Screw Number Price WF-20100125 1/8” 5 $9.00 WF-20100140 9/64” 6 $9.00 WF-20100171 11/64” 8 $9.00 WF-20100187 3/16” 9 $9.00 WF-20100250 1/4” 14 $11.00 Order no. Cut Dia. Drill Size Length Price WF-C4 5/16” 7/64” 7/8” $12.00 WF-C5 3/8” 1/8” 7/8” $12.00 WF-C8 3/8” 11/64” 7/8” $12.00 WF-C9 3/8” 3/16” 7/8” $12.00 WF-C14 1/2” 1/4” 7/8” $13.00 WF-C143 5/8” 3/16” 1-1/16” $16.00 WF-C16 5/8” 1/4” 1-1/16” $16.00 Order no. Plug Dia. Length Shank Price WF-11660375 3/8” 3/8” 3/8” $21.00 WF-11660500 1/2” 3/8” 3/8” $28.00 WF-11660625 5/8” 3/8” 3/8” $31.00 WF-11680750 3/4” 1/2” 1/2” $41.00 Order no. Plug Dia. Length Shank Price WF-11700375 3/8” 1/2” 3/8” $29.00 WF-11700500 1/2” 1/2” 3/8” $36.00 WF-11700625 5/8” 5/8” 3/8” $42.00 WF-11700750 3/4” 3/4” 1/2” $57.00 Order no. Inside Diameter Price WF-11900375 3/8” $6.00 WF-11900625 5/8” $7.00 Order no. Price WF-10393008 $146.00 Order no. Price PLUG-6 $62.00 Order no. Price PCS-8PCE $20.00 Order no. Price CMT900 $267.00
  • 116. Drilling & Boring 114 For more information & to shop online go to www.carbatec.com.au PORTABLE DRILL GUIDE JIG This handy device allows you to drill holes almost anywhere. Used in conjunction with your powered or cordless drill you can take your tools to the work and perform drill press type functions on the move. Connect the drill to the attachment via the 3/8” shaft, insert the bit you need in the separate 3/8” drill chuck and begin to work. A depth stop is included for drilling blind holes. 1.1kg. TOY WHEEL CUTTERS These are popular with hobbyists and toy makers alike. Cut crisp, clean toy wheels with 6mm axle hole for all sorts of toys and projects. Tipped with tungsten carbide these cutter cut cleaner than HSS and stay sharper longer too. WARNING - not to be used with router. CMT EXPANDING 45° COUNTERSINK (CARBIDE TIPPED) Suitable for drill bits from 3 - 7mm. Outside diameter expands from 11 to 15mm. 50g. MIEBACH ZERO MARK COUNTERSINKS These handy countersinks have adjustable depth stop, adjustable centre drill and a ro- tation stop to protect the top surface or your workpiece. Perfect for accurate pre-drilling and countersinking of holes in a variety of materials. Quick change shank. 90° CROSS HOLE COUNTERSINK SET Used primarily in wood and plastic these countersinks can also be used in softer metals to remove burrs after machining. Each bit has a specific di- ameter range. Set includes: 2-5, 5-10, 10-15 and 15-20mm bits in a metal case. 545g. 7 PIECE COUNTERSINK SET Adjustable stops and tapered drills in the following sizes 3.1, 3.5, 3.9, 4.3, 4.7, 5, and 5.6mm. There are also two countersink siz- es: 9.8 & 12.8mm. 400g. 5 PIECE SCREW EXTRACTOR SET Screw heads that are damaged or stripped are very difficult to get out. This HSS set en- gages the damaged head and bites into the material easily extracting the screw. Sold as a set of 5 to extract 6 to 12mm screws. ANGLE CHUCK with 1/4” hex male drive shaft, to 1/4” hex female drive socket. This cast metal chuck is slight- ly less than 90° which makes it adapt- able for more purposes. The handle can be moved to any position around the chuck body. Suitable for driving screwdriver bits and drill bits.165g. VERITAS® SNUG PLUG CUTTERS The only plug cutters that have a cylindrical portion for good penetration, then taper for a tight fit. Screws can be hidden almost invis- ibly. Set of 3 inc. 1/4”, 3/8”, 1/2”. 100g. METRIC PLUG CUTTER SET Set of 3 includes 6, 8 and 10mm plug cut- ters. 100g. TUNGSTEN CARBIDE TIPPED CIRCLE CUTTING TOOL Cut clean crisp circles from 40mm to 200mm. Max. depth: 25mm. Made in Japan. For use in drill presses only. Ideal for plas- tics, fibreglass, hardwoods, etc. Order no. Price 91G01-05 $47.00 Order no. Size Price CT-TWCH40-1/2 40mm dia. $74.00 CT-TWCH50-1/2 50mm dia. $85.00 CT-TWCH60-1/2 60mm dia. $106.00 Order no. Price 521-001-11 $31.00 Order no. Description Price COLT-10850018 3.2mm, #5 screw $29.00 COLT-10850532 4mm, #6, #7 Screw $29.00 COLT-10850316 4.8mm, #8&9 Screw $29.00 COLT-10850732 5.6mm, #10 #12 $35.00 COLT-10850014 6.4mm, #14 screw $35.00 Order no. Price CS-4PCE $62.00 Order no. Price CS-7PCE $27.00 Order no. Price SRS-5PCE $20.00 Order no. Price D-013A $13.00 Order no. Price 05J05-10 $57.00 Order no. Description Price 05J05-50 Set of 3 $57.00 Metric sizes also sold separately 05J05-31 6mm $23.00 05J05-33 8mm $23.00 05J05-35 10mm $23.00 Order no. Price F-107 $144.00
  • 117. Dovetail Jigs & Joinery 115Want to see more? See our website for our full range of products. SUPER FRAME MORTISE & TENON JIG With the Super FMT and a plunge router, every woodworker can easily produce this incredible joint with unmatched accuracy and speed. The Super FMT’s design is based on the original and incomparable FMT. The same great features produce the same great joints. The Super FMT uses just one bit, one guide and one setup for every standard joint. It’s that easy. Super FMT guides and bits allow you to create any size mortise & tenon from a tiny 1/16” x 1/8” to a massive 1/2” x 5”. FMT Features • Over 70 sizes of mortises and tenons • Standard joint guides available in 1/4”, 5/16” (included), 3/8” and 1/2” • Easily recorded, repeatable joint tightness adjustment • Angled and compound angled joints • Works with virtually any plunge router • Clamp boards up to 3”x5” • Easy and precise joint sighting Standard equipment • Universal sub-base that attaches to virtually any plunge router • Six 8mm joint guides (15, 20, 25, 30, 35 & 40mm) • 8mm (5/16”) HSS spiral upcut bit w/1/2” shank (LGH-170-500) • Two Leigh F Clamps • Adjustable side stop fence for tenoning • Fully illustrated user guide PRO FRAME MORTISE & TENON JIG The outstanding Leigh FMT Jig is appearing more and more in workshops around the world. After all, it is mortise & tenon joinery that holds most of the world’s fine furniture and cabinetry togeth- er. Only the FMT uses a single guide and bit to cut both mortises and tenons, with speed and precision that you have to see to believe. The FMT is so easy to use and so efficient that it brings professional quality joinery within reach of any shop. Standard equipment - Imperial Version • Universal sub-base that attaches to virtually any plunge router • Five 5/16” joint guides (5/16” by 1/2”, 3/4”, 1”, 1-1/4” and 1-1/2”), which can make over 21 sizes of mortises and tenons • Joint guide stand, two Leigh cam action clamps • 5/16” HSS spiral upcut bit w/1/2” shank (LGH-170-500) • Adjustable side stop fence for tenoning • Fully illustrated user guide Standard equipment - Metric Version • Universal sub-base that attaches to virtually any plunge router • Six 8mm joint guides (15, 20, 25, 30, 35 & 40mm) • Joint guide stand, two Leigh cam action clamps • 8mm (5/16”) HSS spiral upcut bit w/1/2” shank (LGH-170-500) • Adjustable side stop fence for tenoning • Fully illustrated user guide CARBA-TEC® SPIRAL BITS. Used in conjunction with the FMT jigs, these quality spiral bits produce quality joinery. These super sharp solid tungsten cutters are among the best we have ever seen. Available as a set or individually. Create metric mortise and tenon joints at will. Order no. Description Shank (inch) Price LGH-7PCE Metric Spiral Bit Set $463.00 LGH-3MM 3mm Ind. Spiral Bit 1/4 $30.00 LGH-4MM 4mm Ind. Spiral Bit 1/4 $51.00 LGH-5MM 5mm Ind. Spiral Bit 1/4 $51.00 LGH-6MM 6mm Ind. Spiral Bit 1/4 $72.00 LGH-8MM 8mm Ind. Spiral Bit 1/2 $82.00 LGH-10MM 10mm Ind. Spiral Bit 1/2 $92.00 LGH-12MM 12mm Ind. Spiral Bit 1/2 $102.00 Order no. Description Price LGH-FMT Pro FMT - Imperial $1,205.00 LGH-FMT-M Pro FMT - Metric $1,205.00 Order no. Description Price LGH-SFMT Super FMT - Metric $587.00 LGH-ACSMTVC Accessory kit with carbide bits $308.00
  • 118. Dovetail Jigs & Joinery 116 For more information & to shop online go to www.carbatec.com.au LEIGH SUPERJIGS Leigh Super Jigs produce an extraordinary array of precision join- ery—right out of the box! Like all Leigh jigs, with Super Jigs, you can easily rout many sizes of variably spaced Through and Half- blind dovetails as well as sliding dovetails. If fast production is what you need, for the first time on a Leigh jig, you can now rout the pins and tails of fixed spaced half-blind dovetails at the same time. And that’s not all. With the included Leigh e-Bush and the standard finger assembly, you can rout 5/16” and 5/8” box joints with precise adjustment for fit. Available in 12”, 18” and 24” models, there is a Leigh Super Jig that’s just right for your shop and your budget. Features • Infinitely adjustable guide fingers • Variably spaced through dovetails • Variably spaced half-blind dovetails • Sliding dovetails • “Single pass” half-blind dovetails • 5/16” and 5/8” box joints with precise fit adjustment • VRS ready • Non-slip clamping surface • Cam action clamps • Under-cut side stops • Easy to read scales LEIGH 24” D4R DOVETAIL JIG There are imitations, but no equals! No other dovetail jig on the market today, or tomorrow, can match the incredible joint making capability of the Leigh D4R dovetail jig system. From the first ever fully adjustable dovetail jig in 1981 to today’s award winning D4R, Leigh has led the way in dovetail jig innovation. Variably spaced Through and Half-blind dovetails and Sliding dovetails are standard on all Leigh jigs. The split finger design of the D4R allows complete control of pin and tail sizing and spac- ing and the 1-1/2” board thickness allows that extra flexibility for larger projects. Add the F2 Finger Joint template and you can rout 9 sizes of perfectly fitted box joints. Multiple Mortise and Tenon joints are simple with the M2 attachment but there is more. Use the M2 to create massive half-blind joints in boards up to 1-1/2” thick and unique variably spaced jumbo box joints also in boards up to 1-1/2”. And don’t forget Leigh’s unique Isoloc templates. Isoloc Templates produce some of the most extraordinary joinery avail- able. Only the Leigh D4R does it all. See website for more details. LEIGH VRS VACUUM & ROUTER SUPPORT Dust Free Leigh Jig routing is here! The revolutionary Leigh VRS Vacuum & Router Support (patent pending) provides almost 100% dust and chip collection as well as amazing full width router support. The VRS is a must for all Leigh dovetail jig owners. The VRS is a full width router sup- port. When the work piece has been routed on one side of the jig, the router can be effortlessly moved to the other side of the jig and parked while the work piece is being changed. There is no need to remove the router from the jig. D4R Includes: • Bits • Instructional DVD • User Guide • Template Guidebush Uses a precision CNC machined template along with new template positioning technology (patent pending) for fast and accurate routing of Through Dovetails and Box Joints. The PLUS? The R9 Plus makes 3 sizes of Box Joints and 3 sizes of Through Dovetails, all on boards of any width. Perfect joint fit is guaranteed, and repeatable, with the patent pending Leigh e10 guide bush. LEIGH R9 PLUS ROUTER TABLE & BENCH JOINERY SYSTEM Accessory Kit Order no. Description Price LGH-R9 R9 Plus Joinery System $205.00 LGH-ACR9 R9 Plus Accessory Kit $119.00 Order no. Price LGH-D4R $710.00 Order no. Description Price LGH-SJ12M 12” Leigh Dovetail Jig (metric) $360.00 LGH-SJ18M 18” Leigh Dovetail Jig (metric) $463.00 LGH-SJ24M 24” Leigh Dovetail Jig (metric) $545.00 Order no. Description Price LGH-VRS12 VRS Super 12 $102.00 LGH-VRS18 VRS Super 18 $102.00 LGH-VRS24 VRS Super 24 $113.00 LGH-VRSD24 VRS D4R $133.00 Accessory Kits - Combine a VRS with a Bit Set & Save LGH-AC12 VRS & 1607-8 Bit Set for SJ12M $205.00 LGH-AC18 VRS & 1607-8 Bit Set for SJ18M $226.00 LGH-AC24 VRS & 1607-8 Bit Set for SJ24M $226.00 LGH-ACD24 VRS & 2411-8 Bit Set for D4R $308.00
  • 119. Dovetail Jigs & Joinery 117Want to see more? See our website for our full range of products. FINGER JOINT TEMPLATES • Precision CNC machined aluminium alloy template • Precisely adjustable joint fit • F2: Nine sizes of finger joints (1/16”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”. • Four sizes of unique rounded finger joints, square half-blind corners and round/square through corner joints. • F18 & F24: Six sizes of finger joints (3/32”, 3/16,”3/8”, 1/8”, 1/4”, 1/2”). Four sizes of square half-blind joints. TEMPLATES & ATTACHMENTS ISOLOC JOINT TEMPLATES • Precision CNC machined aluminium alloy template • Scales include inch and metric measurement • Fully adjustable joint tightness with the VGS • I1 Templates attach directly to the D4R and all 24” D-series jigs • I18, I24 Templates attach directly to Super Jigs Isoloc A Key & Mirror Key Isoloc B Clover & Bears Ears Isoloc C Ellipse & Wave Key Mirror Key Inlaid Key Inlaid Mirror Key Clover Bears Ears Inlaid Clover Inlaid Bears Ears Ellipse Wave Inlaid Ellipse Inlaid Wave M2 MULTIPLE MORTISE & TENON ATTACHMENT • Mortises & tenons in sizes from 5/16” x 5/8” to 1-1/2” x 2-1/2” • Choice of three corner radii:5/32”, 1/4”, plus square (with chiselling) • Jumbo half-blind joints up to 1-1/2” • Jumbo variably spaced finger joints up to 1-1/2” Create endless variations & even half-blind jumbo joints. I S O L O C B I T S E L E C T I O NI S O L O C B I T S E L E C T I O N A Bit Diameter 1/4" 5/16" 3/8" B Cutting Depth up to 1" up to 1" up to 1" C Shank Diameter 1/4" 5/16" 3/8" D Shank Length 1-7/8" 1-7/8" 1-7/8" E Overall Length 3" 3" 3" F Joint Length 5/8" 5/8" 5/8" LEIGH BIT ITEM NO. HSS LGH-168 LGH-170 LGH-173 Solid Carbide LGH-168C LGH-170C LGH-173C LGH-1617IC 3-piece Bit Set (includes all three Solid Carbide bits listed) M U L T I P L E M O R T I S E A N D T E N O N B I T S E L E C T I O N *Bit 180 is included with the mortise and tenon attachment. A Bit Diameter 1/2" 5/16" B Cutting Depth 1-1/2" 1" C Shank Diameter 1/2" 5/16" D Shank Length 2" 2" E Overall Length 3-1/2" 3" Required Template Guidebush 5/8" 7/16" LEIGH BIT ITEM NO. HSS LGH-180 LGH-170 Solid Carbide LGH-180C LGH-170C * ** ** ** ** ** 8mm 1/4"Cutting Diameter 5/16" 3/8" 7/16" 1/2" 13/16" 5/16" 1/2" 2"Overall Length 2-1/8" 2-1/4" 2-3/8" 2-9/16" 3" 2-3/4" 3" Shank Diameter 8mm 1/2" 1/2" Guidebush Size 7/16"OD 5/8"OD 7/16"OD 5/8"OD Straight Bits Req’d. Use Leigh No.140-8 Straight Bit Use Leigh No.150 – – Shank Length All Shank Lengths are 1-3/4" All Shank Lengths are 1-3/4" 11/16" 2-3/4" 1/2" 5/8"OD Use Leigh No.160 7/16" 1/8"-1/4"Depth of Cut Range 1/8"-3/8" 1/4"-1/2" 3/8"- 5/8" 1/2"-13/16" 1"- 1-1/4" up to 1" up to 1-1/4"5/8"- 1" up to 1-1/4" 3" 1/2" 5/8"OD – 1/4" 1/2" 3/4" All through dovetail bits have 8˚ angles. All carbide bit heights are slightly greater than maximum depth of cut listed. 1" 1-1/4" DepthofCut Item No. (8mm Shank) 1/8" 3/8" 5/8" 7/8" 1-1/8" Denotes Depth of Cut Range All bits may be used on the D4R. Bits 90, 100, 150 and 160 cannot be used on Super Jigs. * One 1/2" 8˚ dovetail bit (No. 80-8), one 5/16" straight bit (No. 140-8) and one 1/2" 14˚ dovetail bit (No. 120-8) are included with the D4R and Super Jigs. Price (8mm Shank) LGH-50-8 LGH-60-8 LGH-70-8 LGH-75-8 LGH-80-8* LGH-90 LGH-100 LGH-140-8* LGH-150 LGH-160 T H R O U G H D O V E T A I L B I T S E L E C T I O N Bit Diameter 1/2" Shank Diameter 8mm Overall Length 2-1/8" Guidebush Size 7/16" Cutting Depth 3/8" 1/2" 8mm 2-1/4" 7/16" 7/16" 1/2" 8mm 2-5/16" 7/16" 1/2" 1/2" 8mm 2-3/8" 7/16" 5/8" 1/2" 8mm 2-9/16" 7/16" 3/4" 1/2" 3/4" All carbide bit heights are slightly greater than maximum depth of cut listed. DepthofCut Item No.(8mm Shank) 3/8"7/16" 5/8" **One 1/2" 8˚ dovetail bit (No.80-8), one 5/16" straight bit (No.140-8) and one 1/2" 14˚ dovetail bit (No.120-8) are included with the D4R and Super Jigs. * Depth of cut will vary for Single Pass Half-blind dovetails routed on Super Jigs. See leighjigs.com for details. 18º 14º 12º 10º 8º H A L F - B L I N D D O V E T A I L B I T S E L E C T I O N * Price (8mm Shank) LGH-128-8 LGH-120-8** LGH-112-8 LGH-101-8 LGH-80-8** ** ** – – 1/4" 1/2" 3/4" 1" 1-1/4" 1/8" 3/8" 5/8" 7/8" 1-1/8" DepthofCut Item No. (HSS) Item No. (Solid Carbide) Price (HSS) Price (Solid Carbide) 1/16"Bit Diameter 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 3/16"Max Depth of Cut 3/8" 3/8" 5/8" 5/8" 3/4" 7/8" 1" 1-1/4" 1/4"Shank Diameter 1/4" 1/4" 1/4" 1/4" 1/4" 8mm (5/16") 3/8" 1/2" 2"Overall Length 2" 2" 2" 2-1/2" 3" 2-3/4" 3" 3-1/2" 8-7/16"Max Board Width 12-9/16" 8-7/16"* 10-1/2" 12-9/16" 8-7/16"* 10-1/2"** 12-9/16"** 14-21/32"** LGH-162 LGH-163 LGH-164 LGH-166 LGH-168 LGH-170 LGH-173 LGH-180 LGH-166C LGH-168C LGH-170C LGH-173C LGH-180CLGH-164C LGH-165C F I N G E R J O I N T B I T S E L E C T I O N All bits may be used with the F2. Bits 165 and 170 cannot be used with the F18 and F24. * 1/4" and 1/8" box joints may be routed up to 14" widths on the 1/2" comb. ** A simple two-step procedure allows 5/16" square finger joints to be routed to 20" width, and 3/8" and 1/2" square finger joints to be routed to 24" width. NOTE: 162, 163, and 165 are single fluted bits. F I N G E R J O I N T B I T S E T S Item No. (High Speed Steel) LGH-1806F For Super Jigs F18, F24 LGH-1618F For F2 Item No. (Solid Carbide) LGH-1806C For Super Jigs F18, F24 LGH-1618C For F2 LGH-162 • • • LGH-163 • • • LGH-164 • • LGH-164C • • LGH-165C • LGH-166 • • LGH-166C • • LGH-168 • • LGH-168C • • LGH-170 • LGH-170C • LGH-173 • • LGH-173C • • LGH-180 • • LGH-180C • • LGH-172-8 • LGH-172-8 • LGH-172-375 • • LGH-172/LGH-375 • • Price D O V E T A I L B I T S E T S LGH-50-8 • • • LGH-60-8 • • • LGH-70-8 • • • LGH-75-8 • • • LGH-80-8* • LGH-90* • • LGH-100 • • LGH-101-8 • • • LGH-112-8 • • • LGH-120-8 • LGH-128-8 • • • LGH-140-8 • LGH-172-8 • 2 LGH-150 • • LGH-160 • • * Comes standard with Super Jigs and D4R. NOTE: Bits with 1/2" shanks cannot be used on Super Jigs. * * LGH-16078 (Super Jigs) Item No. LGH-24118 (D4R) LGH-51168 (D4R) Price $25.00 $25.00 $25.00 $25.00 $25.00 $30.00 $30.00 $25.00 $25.00 $25.00 $25.00 $25.00 $25.00 $25.00 $25.00 $28.00 $25.00 $25.00 $26.00 $27.00 $39.00 $41.00 $78.00 $39.00 $41.00 $45.00 $45.00 $67.00 $70.00 $133.00 $195.00 $278.00 $288.00 $510.00 $175.00 $247.00 $319.00 Order no. Description Price LGH-I1A A for D4R $329.00 LGH-I1B B for D4R $329.00 LGH-I1C C for D4R $329.00 LGH-I13 A/B/C for D4R $720.00 LGH-I18B B for Super18 $288.00 LGH-I24A A for Super24 $339.00 LGH-I24B B for Super24 $339.00 Order no. Suits Price LGH-F18 Super18 $247.00 LGH-F24 Super24 $288.00 LGH-F3 (Imperial) D4R $339.00 LGH-F3M (metric) D4R $339.00 Order no. Suits Price LGH-M2M24 Super24 $391.00
  • 120. Dovetail Jigs & Joinery 118 For more information & to shop online go to www.carbatec.com.au UNIVERSAL TEMPLATE GUIDES 12” BLIND DOVETAIL JIG Made in Taiwan, This unit is almost identical to the mainland Chinese copies. However the finish and attention to detail is superior. Jig will dovetail material up to 12” (300mm) wide and from 12mm to 32mm thick. 10kg. Optional Router Bits to Suit WDV-1NK Dovetail Jig CARBA-TEC® METRIC DOWEL FORMER & RE-SIZER Ideal for resizing pre-existing dowels to a smaller size or for converting imperial dowels to metric dowels. This solid steel dowel plate is also ideal for forming new dowels from square stock. SELF-CENTRING DOWELING JIG This design has removable bushings that allow you to drill two holes the same size without moving the jig. The holes are on 3/4” centre, the bushings and centre section are hardened drill steel and plated for rust protec- tion. Comes with two 6, 8, 10mm bushings. Weight 1.25kg. ROCKLER POCKET HOLE JOINERY CLAMP Clamp and surface align your pocket hole joints easily. Works with 3/8’’ pocket holes on 3/4’’ thick face frames and casework. Clearance in clamp body allows for clamping and fastening of double joints in one step. Light- weight aluminium construction. Patent pending. HARON JOINERY BISCUITS Joinery biscuts in standard siz- es of 0, 10 and 20. Available in small or bulk packs. CMTTM BISCUIT BLADE This 100mm blade with its in- dustrial Teflon® coating will make swift and accurate cuts for your biscuits. Eight carbide teeth and 22mm bore. Will fit Lamello, Porter-Cable, Bosch, Freud and Archer biscuit jointers. 190g. INTERLOCK SIGNMAKER’S TEMPLATES Templates interlock to form a stable pattern as you rout signs with appropriate carbide router bits and bushings. Secure patterns to your work surface with Painters Tape, masking tape or double sided tape. Requires the use of a plunge router that accepts standard 1-3/16” template guides. Requires router bit 814-095-11. You also have the option to upgrade to a brass bush (RK-BUSH12). The Letters Kit includes a total of 40 letters with duplicates of com- mon letters and three spacers. Numbers and Symbols Kit includes: 1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 0, 0, !, @, #, $, ‘, ?, ., / and &. Order no. Suits Price WDV-1NK Dovetail Jig $135.00 DTJFDS Accessory Mini Dovetail Comb, Router Bit & Template Guide $79.00 Order no. Desc. Shank Size Cutting Length Cutting Dia. Angle Weight Price CT-0758BC Dovetail Bit 1/4” 16mm 5/8” 7° 60g $21.00 CT-0758B 1/4” 16mm 5/8” 7° 60g $27.00 818-142-11B 1/4” 9.5mm 9/16” 14° 60g $37.00 BJB-95 Box Joint Bit 1/4” 9.5mm 1/2” 0° 60g $32.00 Order no. Price 240-008-04 $31.00 Order no. Price DPM-1 $59.00 Order no. Price DJ-1M $49.00 DJ-1M-BUSH $10.00 Order no. Price RK-38518 $25.00 Order no. Desc, Price HA-H5465 50pk,#0 $9.00 HA-H5470 1000PK #0 $79.00 HA-H5462 50pk #10 $9.00 HA-H5460 150pk,#10 $21.00 HA-H5472 1000pk#10 $79.00 HA-H5464 50pk##20 $9.00 HA-H5463 150pk#20 $21.00 HA-H5474 1000pk,#20 $79.00 Order no. Description Price RK-30610 2-1/4” Letter Kit $25.00 RK-30599 2-1/4” Number & Symbols Kit $25.00 Order no. Description Price LGH-702 Guidebush adaptor to suit some Bosch, DeWalt, Elu, Ryobi $21.00 LGH-702R Guidebush adaptor to suit some DeWalt, Elu $29.00 LGH-703 Guidebush adaptor to suit some Hitachi, Makita, Ryobi $21.00 LGH-704R Guidebush adaptor to suit Triton TRA001, some Metabo,Festool $29.00 LGH-705R Guidebush adaptor to suit Festool OF2000 $29.00 LGH-706R Guidebush adaptor to suit some DeWalt, Elu, Makita, Ryobi $29.00 LGH-710 Guidebush adaptor to suit Archer/Axminster AW635/AW127 $26.00 LGH-721 Guidebush adaptor to suit some Makita $29.00 LGH-RA1100 Guidebush adaptor to suit some Bosch $37.00 FE-493566 Guidebush adaptor to suit Festool OF1400 N/A LGH-711TP Guidebush 7/16” OD $17.00 LGH-716TP Guidebush 5/8” OD $17.00 LGH-E7 Elliptical Guidebush 7/16” OD $17.00 LGH-E8 Elliptical Guidebush 1/2” OD $17.00 LGH-E10 Elliptical Guidebush 5/8” OD $17.00
  • 121. Dovetail Jigs & Joinery 119Want to see more? See our website for our full range of products. PICTURE FRAMING KIT A kit containing all the equip- ment needed to make your own frames. Kit includes mitre clamp, magnetic saw guide with tenon saw, v-nailing tool and a selec- tion of v-nails, flexi-nails and push applicator, hanging wire and a selection of brass hooks and hangers.2kg. COMPACT MITRE BOX Saw carriage swings right and left 45° for simple mitre cuts. Wood cutting capacity at 90°: 119mm wide x 110mm high, at 45° either left or right cuts: 71 wide x 110mm high. Blade length: 350mm. Comes with the standard 14tpi blade. 1.6kg. MITRE BOX Saw carriage swings right and left 45° for simple mitre cuts. Wood cutting capacity at 90°: 137mm wide x 110mm high, at 45° ei- ther left or right cuts: 85 wide x 110mm high. Blade length: 550mm. Comes with the stand- ard 14tpi blade. 2.6kg. MITRE BOX Saw carriage swings right and left 45° for simple mitre cuts. Blade also tilts left and right 45° for compound mitre cuts. Max. wood cutting capacity at 90°: 175mm wide x 155mm high, at 45° either left or right cuts: 111 wide x 155mm high. Blade length: 600mm. Comes with the standard 14tpi blade. 4.6kg. PRECISION MITRE TRIMMER Set at 90° or 45° for near perfect joints. Fitted with razor sharp HSS blades for clean trimming of wood & picture frame mould- ings. 13.6kg. WOOD THREAD BOX & TAP SET Prices include tap. Sizes as fol- lows. CARBA-TEC® MITRE CLAMP Jaws grip close to the joint avoid- ing bowing problems while under pressure. This unit can be used bench mounted or free standing. Accepts material up to 120mm wide and up to 40mm thick. This clamp is ideal for joining 45° mi- tred material at 90° such as pic- ture framing and carcasses, etc. 730g. CARBA-TEC® V-NAIL TOOL Install v-nails with ease, either by hand or by way of striking the handle of the tool with a mallet or hammer. Kit includes v-nail tool with magnetic positioner, 100 7mm v-nails and 100 10mm v-nails. 245g. REPLACEMENT V-NAILS for hardwood. Pack of 400. A. BEADLOCK 3/8” BASIC STARTER KIT & B. PRO JOINERY KIT Get incredibly strong, totally con- cealed joints with just your hand drill and a Beadlock kit. This patented system creates overlapped drill bit holes precisely to accept a special Beadlock loose tenon. This ribbed tenon approach prevents racking and increases the amount of face grain glue surface area. Beadlock Basic (A) includes four .060” shims, two .030” shims, 3/8” HSS drill bit and a moulded plastic case for stor- age. Beadlock Pro (B) includes the Pro jig, 3/8” HSS drill bit, 3/8” stop collar, 3/8” Bead- lock guide block, 3/” mortise paring guide block and a moulded plastic storage case. A. B. ROCKLER PICTURE- HANGING KEYHOLE TEMPLATE Hang pictures and other items easily and precisely with this slot cutting template. No measuring is required, just line up the tem- plate with the corners of your frame and rout - your slots will always be level. The two short slots are perfectly symmetrical so you can switch easily from left to right. The long slot increases your horizontal adjustability. NOBEX CHAMPION COMPOUND MITRE SAW 180mm cutting height, 630mm blade length. NOBEX BASIC COMPOUND MITRE SAW 110mm cutting height, 565mm blade length. Order no. Price VNT-320 $24.00 Order no. Price CPT-350 $51.00 Optional Blades CPT-350-14T 14tpi $12.00 CPT-350-18T 18tpi $12.00 Order no. Price CPT-550 $61.00 Optional Blades CPT-550-18T 18tpi $16.00 CPT-550-24T 24tpi $18.00 Order no. Price CPTC-600 $83.00 Optional Blades CPTC-600-14T 14tpi $20.00 CPTC-600-18T 18tpi $20.00 CPTC-600-24T 24tpi $23.00 Order no. Price TRT-320 $66.00 Order no. Price CT-MT $314.00 Order no. Desc. Price WTB-12 1/2”, 8 tpi $67.00 WTB-34 3/4”, 6 tpi $69.00 WTB-1 1”, 6 tpi $74.00 WTB-114 1-1/4”, 6tpi $77.00 WTB-112 1-1/2”, 6 tpi $79.00 Order no. Price CT-7901 $25.00 Order no. Size Price PUSH-10410 7mm $15.00 PUSH-10412 10mm $15.00 PUSH-10414 12mm $15.00 PUSH-10417 15mm $15.00 Order no. Description Price RK-34802 A. Basic Started Kit $47.00 RK-37801 B. Pro Joinery Kit $185.00 BL-12 1/2” Tenon Stick $6.00 BL-38 3/8” Tenon Stick $6.00 RK-34985 1/2” Guide Block (Basic) $37.00 RK-36546 1/2” Guide Block (Pro) $72.00 Order no. Size Price RK-32884 Template $17.00 RK-38756 Brass Bush $15.00 Order no. Price NBX-80804 $319.00 Order no. Price NBX-PRM-110B $179.00
  • 122. Dovetail Jigs & Joinery 120 For more information & to shop online go to www.carbatec.com.au THE MINI KREG JIG® Kreg’s most positionable pock- et hole tool. The jig is designed without an alignment fence which al- lows it to be clamped at virtually any angle or orientation to the edge of the workpiece • Compact, single-drill guide design allows placement of pocket holes in tightest areas. • Unlimited material thickness and width positioning thanks to fenceless design. • Hardened steel drill guide with lifetime warranty holds up in the most demanding applications. KREG R3 POCKET HOLE JIG If you’re ready to start your next woodwork- ing or home improvement project, the R3 Kreg Jig® is the tool for you. We’ve loaded this jig with a ton of features that allow you to put projects together more quickly than ever before. • 9 Position Settings • Wood Chip Relief Holes • Clamp Adaptor • Organised Carrying Case • Hardened steel drill guides KREG K4 JIG The perfect choice for DIY’ers and anyone new to Pocket-Screw Joinery. Whether you’re building your first set of ga- rage storage shelves or making simple re- pairs around the house, the Kreg Jig® can help you finish the job in less time, and with far less effort than you ever thought possible. • Removable Drill Guide for benchtop and mobile use. • 1/8” incremental settings for materials from 1/2” to 1-1/2” thick. • Patented three drill guide fixed spacing on the Drill Guide. THE KREG JIG® K4 MASTER SYSTEM The ultimate Pocket-Hole Jig on the market, and a great choice for any woodworking en- thusiast. Between its front-side clamping ca- pabilities, Dust-Collection Attachment, Ma- terial Support Stop, removable 3-Hole Drill Guide, and seemingly endless adjustability, this jig truly has it all! • Removable Drill Guide for use with bench top and portable bases. • 1/8” incremental settings for materials from 1/2” to 1-1/2” thick. THE MICRO POCKETTM DRILL GUIDE With a 25% smaller hole diameter than the Mini Kreg Jig® , the Micro PocketTM Drill Guide lets you create more compact, low-profile Pocket- Holes in the same joinery applications, but also tackle smaller projects, thinner stock, and tighter repair applications. Kit Includes: • Micro PocketTM Drill Guide • Micro PocketTM Drill Bit • Micro PocketTM Depth Collar • Starter Screw Set KREG® HD POCKET HOLE JIG Guarantee the strongest joint possible for all your building projects. Optimised for working with 90 x 45mm and larger stock. It utilises larger, heavy-duty, hardened-steel, screws which provide incredible shear resistance as well as 3 anti-corrosion layers for long- term moisture resistance. It works great as a stand-alone jig; simply connect it to your Kreg Face Clamp™, lock it into place, and take it where you need to go. Can also con- nect directly to your model K3 or K4 Kreg Jig® benchtop base for upright drilling. A B C D E KREG CLAMPS KREG® DECK JIG Easy-grip handle gives you a secure hold and complete control over each and every joint. Works exclusively with 4/4 to 5/4 (3/4” to 1-1/8”) stock. Hardened Steel Drill Guides keep your specialized stepped bit and driver bit at the precise, optimal angle Lifetime war- ranty on Deck Jig. Order no. Description Price KR-MKJ Mini Kreg Jig $13.00 KR-MKJKIT Mini Kreg Jig Kit $26.00 Order no. Price KR-R3 $61.00 Order no. Price KR-K4 $123.00 Order no. Price KR-K4MS $185.00 Order no. Price KR-KJMICRODGB $57.00 Order no. Description Price A KR-KHC-RAC Right Angle Clamp $41.00 B KR-KHC-PREMIUM Face Clamp 3” reach $30.00 C KR-KHC-LARGE Face Clamp 6” reach $41.00 D KR-KHC-XLARGE Face Clamp 10” reach $54.00 E KR-KHC-90DCC 90° Corner Clamp $47.00 Order no. Price KR-KJHD $69.00 Order no. Price KR-KJDECKSYS $139.00 KR-SDK-C2SS-700 $175.00 KR-SDK-C2SS-100 $29.00
  • 123. Dovetail Jigs & Joinery 121Want to see more? See our website for our full range of products. KREG TIMBER & PLASTIC PLUGS KREG SQUARE DRIVERS & DRILL BITS Our one-piece design elimi- nates clogging and provides a much smoother and faster drill- ing stroke than the drill bits with replaceable centre drills. KREG QUICK CHANGE KIT This one simple kit provides everything you need to switch from drilling Pocket- Holes to driving Pocket-Screws, in just seconds. Components include an in- novative Quick Change Chuck, a 6” #2 Square Driver, and the all new 3/8” Hex- Shank Pocket-Hole Drill Bit – including al- len wrench and depth collar. KREG SCREW KITS KR-SK03 kit includes: SPS- F1 x150, SPS-C1 x150, SML-F125 x 150, SML-C125 x 150 & SML-C250B x 75. KR-SK03B kit includes: SML-125B x 100, SML-150B x 100, SML-C2B x 100, SML-C250B x 150. KREG SELF TAPPING SCREWS Order no. Description Price KR-P-CDR 50 USA Cedar plugs, 50g $13.00 KR-P-CDR-200 200 USA Cedar plugs, 50g $46.00 KR-P-CHE 50 Cherry plugs, 70g $13.00 KR-P-CHE-200 200 Cherry plugs, 70g $46.00 KR-P-MAP 50 USA Maple plugs, 80g $13.00 KR-P-MAP-200 200 USA Maple plugs, 340g $46.00 KR-P-OAK 50 USA Oak plugs, 80g $13.00 KR-P-OAK-200 200 USA Oak plugs, 80g $46.00 KR-P-PIN 50 Pine plugs, 55g $13.00 KR-P-PIN-200 200 Pine plugs, 55g $46.00 KR-P-WAL 50 USA Walnut plugs, 70g $13.00 KR-P-WAL-200 200 USA Walnut plugs, 70g $46.00 KR-CAP-WHT-50 50 White plastic plugs, 23g $13.00 KR-CAP-WHT-200 200 White plastic plugs, 23g $46.00 KR-CAP-ALM-50 50 Almond plastic plugs, 110g $13.00 KR-CAP-ALM-200 200 Almond plastic plugs, 340g $46.00 KR-CAP-BLK-50 50 Black plastic plugs, 110g $13.00 KR-CAP-BLK-200 200 Black plastic plugs, 340g $46.00 KR-CAP-BRN-50 50 Brown plastic plugs, 110g $13.00 KR-CAP-BRN-200 200 Brown plastic plugs, 340g $46.00 KR-CAP-LTB-50 50 Light Brown plastic plugs, 110g $13.00 KR-CAP-LTB-200 200 Light Brown plastic plugs, 340g $46.00 Order no. Description Qty. g/kg Price MAXI-LOCTM FINE KR-SML-F125-100 #7 Fine/Washer-Head 1-1/4” 100 340g $7.00 KR-SML-F125-500 500 1.36kg $26.00 KR-SML-F125-1000 1000 2.49kg $44.00 KR-SML-F150-100 #7 Fine-Washer-Head 1-1/2” 100 340g $8.00 KR-SML-F150-500 500 1.47kg $29.00 KR-SML-F150-1000 1000 2.72kg $49.00 MAXI-LOCTM COARSE THREAD KR-SML-C1-100 #8 Coarse/Washer- Head 1” 100 230g $7.00 KR-SML-C1-500 500 1.13kg $25.00 KR-SML-C1-1000 1000 2.04kg $44.00 KR-SML-C125-100 #8 Coarse/Washer- Head 1-1/4” 100 340g $7.00 KR-SML-C125-500 500 1.3kg $25.00 KR-SML-C125-1000 1000 2.38kg $44.00 KR-SML-C150-100 #8 Coarse/Washer- Head 1-1/2” 100 340g $8.00 KR-SML-C150-500 500 1.59kg $30.00 KR-SML-C150-1000 1000 2.95kg $51.00 KR-SML-C2-50 #8 Coarse/Washer- Head 2” 50 230g $6.00 KR-SML-C2-250 250 1.02kg $20.00 KR-SML-C250-50 #8 Coarse/Washer- Head 2-1/2” 50 260g $8.00 KR-SML-C250-250 250 1.1kg $26.00 MAXI-LOCTM HI-LO KR-SML-HL125-100 #7 Hi-Lo/Washer- Head 1-1/4” 100 340g $7.00 KR-SML-HL125-500 500 1.25kg $26.00 KR-SMLHL125-1000 1000 2.49kg $44.00 PAN HEAD FINE KR-SPS-F075-100 #6 Fine/Pan-Head 3/4” 100 230g $7.00 KR-SPS-F075-500 500 1.3kg $23.00 KR-SPS-F075-1000 1000 1.7kg $41.00 KR-SPS-F1-100 #6 Fine/Pan-Head 1” 100 340g $7.00 KR-SPS-F1-500 500 1kg $25.00 KR-SPS-F1-1000 1000 1.93kg $44.00 KR-SPS-F125-100 #7 Fine/Pan-Head 1-1/4” 100 340g $7.00 KR-SPS-F125-500 500 1.2kg $26.00 KR-SPS-F125-1000 1000 2.3kg $44.00 KR-SPS-F150-100 #6 Fine/Pan-Head 1-1/2” 100 340g $8.00 KR-SPS-F150-500 500 1.25kg $29.00 KR-SPS-F150-1000 1000 2.5kg $49.00 PAN HEAD COARSE KR-SPS-C1-100 #7 Coarse/Pan- Head 1” 100 340g $7.00 KR-SPS-C1-500 500 1kg $25.00 KR-SPS-C1-1000 1000 2kg $44.00 BLUE-KOTE KR-SML-C125B-100 #8 Coarse/Washer- Head 1-1/4” 100 340g $9.00 KR-SML-C150B-100 #8 Coarse/Washer- Head 1-1/2” 100 450g $10.00 KR-SMLC150B-1000 1000 2kg $67.00 KR-SML-C2B-50 #8 Coarse/Washer- Head 2” 50 230g $7.00 KR-SML-C2B-250 250 910g $22.00 KR-SML-C250B-50 #8 Coarse/Washer- Head 2-1/2” 50 340g $9.00 KR-SML-C250B-250 250 1.13kg $30.00 STAINLESS SCREWS KR-SMLC125S5-100 #8 Coarse/Washer- Head 1-1/4” 100 340g $25.00 KR-SMLC125S51000 1000 2.5kg $195.00 KR-SMLF125S5-100 #8 Fine/Washer-Head 1-1/4” 100 340g $39.00 KR-SMLF125S51000 1000 2.5kg $308.00 KR-SMLC150S5-100 #8 Coarse/Washer- Head 1-1/2” 100 340g $30.00 KR-SMLC150S51000 1000 2.83kg $205.00 KR-SMLC250S5-100 #8 Coarse/Washer- Head 2-1/2” 100 340g $51.00 KR-SMLC250S5-250 2­50 1.7kg $144.00 Order no. Description Price KR-KJD 3/8” High Speed Steel Drill Bit, 70g $19.00 KR-KJSC-D Depth collar/allen Wrench (not shown) $4.00 KR-KJD-MICROBIT Micro pocket depth collar/allen wrench $19.00 KR-DDS 3” & 6” Square Driver Set $7.00 Order no. Price KR-QUIK-KIT $30.00 Order no. Description Price KR-SK03 Standard Screw Pack $41.00 KR-SK03B BlueKote Screw Pack $51.00
  • 124. Adhesives & Finishing Products 122 For more information & to shop online go to www.carbatec.com.au GLUE SYRINGES For accurately applying glue in awkward spots, nothing beats a needle-tipped sy- ringe. This set of five syringes with 10 blunt- end needles (five #18 gauge and five #20 gauge). Ideal for putting glue deep into cracks. Made in USA. 70g. GLUING KIT An excellent value glue applicator in- corporating a glue roller and other various nozzles. The nozzles come in different sizes and configura- tions including a brush applicator, dowel hole nozzles and a specific nozzle purely for biscuit joints. Sup- plied with two empty glue bottles. 425g. GLUE BOTTLE SET All purpose glue bottle set. Includes glue bottle and 3 interchangeable (roller, point and Napoleon style) heads in- cluded. 145g. PAINTER’S PYRAMIDS - 10PK These simple supports are quick to set up, non-marking, and compact to store. Mould- ed from a solvent-resistant polymer, they will not react with finishes or wood. Each support is 50mm high and has a load rating of 90kg. ORGANOIL DANISH TYPE OIL A medium sheen finish comprising of tung- nut, linseed, pinewood & citrus oils, made in the tradition of the heavy oil formulation that Danish oil is famous. Perfect for interior furni- ture, joinery and timber feature work. ORGANOIL ECOWOOD OIL A blend of nut and citrus oils, specially for- mulated to create a drying oil that will main- tain wooden items that often come into con- tact with food or water. A simple wipe on/ wipe off application is all that is required to keep wooden surfaces and utensils looking good. 300g. ORGANOIL GARDEN FURNITURE OIL A matt sheen, marine grade clear oil that penetrates and nourishes. (Not shown) ORGANOIL HARD BURNISHING OIL Based on Tung Oil, it has very efficient drying and curing capabilities. 560g. NATURAL WAX & POLISH A formulation of filtered bees wax and pure, light plant oils. (Not shown) EARLEX HVLP PRO Designed for trades- men and serious DIY enthusiasts. Fitted with a 625w efficient taper fan motor supplying the gun with a con- stant flow. The Earlex Pro always allows for a professional result with no brush marks, at the same time as being ex- tremely time efficient. 5.5kg. HUT WOODTURN- ER’S WAX With Money Back Guarantee. If this is not the best and easi- est finish you’ve ever tried, return it at the end of seven days for a full refund of the pur- chase price. Gives a hard, full bodied finish to your work without lines or blotches. 120g. PROFESSIONAL PEN POLISH WAXES For a long wearing semi-gloss finish use brown. 70g. For a long wearing full gloss fin- ish use white. 70g. The ultimate gloss finish, use brown first, then finish with white. POLYPROPYLENE SHIMS Accurately made in a range of thicknesses, these polypropylene shims can be used indi- vidually or stacked in combinations for a pre- cise fit, saving time and eliminating guess- work when spacing, plumbing or levelling. Assortment includes 1/32”, 1/16”, 1/8” and 1/4” thick shims (10 of each) NATURAL WOODSHEEN Formulated from highly refined Natural Plant Oils and waxes. Provides a soft, satin result. WASH-A-WAY A safe effective alkaline salt based cleaner and soaker, with an oxidizing, mild bleach action. An ideal cleaner for external grimy, mouldy and weathered timbers. Items can be sent by mail. ROCKLER NEEDLE POINT GLUE INJECTOR The 1-1/4’’ long needle reaches where other glue applicators will never go. Ideal for getting glue into grooves, crevices and other hard-to-reach spots. Holds 14ml. ROCKLER SILICONE GLUE BRUSH This brush features silicone bristles that are easy to wash with water, and quickly shed dried glue for long- lasting service. Order no. Price 25K07-31 $18.00 Order no. Price GB-55 $20.00 Order no. Price GS-114 $9.00 Order no. Price 88K58-70 $9.00 Order no. Description Price ORG-DO-500ML 500ml, 550g $26.00 ORG-DO-1LTR 1L, 1kg $41.00 Order no. Price ORG-WOODWIPE $15.00 Order no. Description Price ORG-GF-500ML 500ml, 500g $25.00 ORG-GF-1LTR 1L, 1kg $37.00 Order no. Description Price ORG-HB 500ml, 560g $25.00 ORG-HB-1LTR 1L, 1kg $37.00 Order no. Description Price ORG-WP-500 500ml, 600g $24.00 Order no. Price EARLEX-PRO $499.00 Order no. Description Price HUT-L Light $16.00 Order no. Description Price HUT-107 Brown $9.00 HUT-108 White $9.00 Order no. Price 27K07-45 $10.00 Order no. Description Price ORG-W-1LTR 1L, 1kg $37.00 Order no. Description Price ORG-WASH 1L $22.00 Order no. Price RK-63297 $7.00 Order no. Quantity Price RK-45624 Single $8.00 RK-45624-3PK 3 pack $19.00
  • 125. Adhesives & Finishing Products 123Want to see more? See our website for our full range of products. HOT STUFF CYANOACRYLATE GLUE REFERRED BY LABEL COLOUR. ALL GLUES CLEAR. RED LABEL HOT STUFF Used for assembled joints such as chair stretchers and legs that are loose and won’t come apart easily, tight cracks, and any place a thin viscosity fast dry glue is called for. 80g YELLOW LABEL SUPER T HOT STUFF The general purpose glue, its medium vis- cosity and drying time allows some align- ment and assembly time. 80g. GREEN LABEL SPECIAL T HOT STUFF A heavy bodied, thick viscosity glue allowing the most assembly time and is excellent on very porous surfaces or where complex as- sembly requires the most time to work. 80g. SPARE TIPS Extra tips and over caps are available 2 sets to a box. 10g. PRO TIPS Precision control extension applicators, 12 per box. 10g. HOT SHOT ACCELERATOR An excellent degreaser and preparation. 90g. ‘U BEAUT 500ML WHITE SHELLAC (DEWAXED) Used the same way as you would use any of the other varieties of shellac. The ma- jor difference is that it is a bit harder, shines a bit brighter, is free from wax and will not change the natural, wet colour of wood. Flammable - Road Transport only. ‘U BEAUT SHELLAWAX GLOW Shellawax Glow is identical to Shellawax, except for its colour. The Glow product is a deeper colour than regular Shellawax making it suitable for darker, more highly figured timbers. It will add depth and richness to your project, enhancing the natural figure. 500ml. Shipping weight: 485g. Flammable - Road Transport only. ‘U BEAUT TRADITIONAL WAX A general purpose wax paste made from a unique blend of miner- als and natural waxes (including Ceresin & Car- nauba), with a clean fresh fragrance. This special blend of waxes make Traditional Wax very easy to work with and leaves you with a non-sticky surface that will not attract dust or finger marks. ‘U BEAUT 250ML EEE ULTRA SHINE A cut and polish paste wax containing Tripoli powder, an ultra fine abrasive. The polish is designed to be used in conjunction with Shellawax and Shellawax Cream or as a finish in its own right on plastics and some stone. ‘U BEAUT SHELLAWAX The new formula Shellawax is a foolproof, one application, fric- tion polish, made for use on the wood lathe. It is (to our knowl- edge) the fastest and easiest to use polish of its kind on the market today, giving an instant shine to all timbers. Flammable - Road Transport only. TITEBOND® ORIGINAL WOODGLUE Provides a strong initial tack and fast speed of set to reduce clamp time. TITEBOND® II PREMIUM WOODGLUE Is the only one-part wood glue that passes the ANSI Type II water resistance specifica- tion. It is FDA approved for indirect food con- tact and is ideal for radio frequency gluing systems. TITEBOND® III ULTIMATE WOODGLUE Titebond III Ultimate Wood Glue is the first one-part, water cleanup wood glue ever of- fered that is proven waterproof. Titebond III is non-toxic, solvent free and cleans up with water. TITEBOND® POLYURETHANE GLUE Ready-to-use, offers excellent sandability and is unaffected by finishes. 355ml bottle. TITEBOND® LIQUID HIDE GLUE Is the first hide glue to be offered in a liq- uid, ready-to-use form. It requires no mixing, heating or stirring. 237ml. ‘U BEAUT 500ML HARD SHELLAC A finish with all the beauty and ease of shellac, yet creates a film that will withstand heat, water and alcohol. Order no. Price HS-4 $16.00 Order no. Price HST-4 $16.00 Order no. Price HST-4T $18.00 Order no. Price HT-600 $6.00 Order no. Price PT-100 $5.00 Order no. Price NCF-5M $18.00 Order no. Price UB-DWS $29.00 Order no. Price UB-SGW $41.00 Order no. Description Price UB-TNEUT Neutral, 250ml $15.40 UB-TBALT Baltic Pine, 250ml $17.00 UB-TWNUT Walnut, 250ml $17.00 UB-TCED Cedar, 250ml $17.00 Order no. Price UB-EEE $23.10 Order no. Description Price UB-SW250 250ml $29.00 UB-SW500 500ml $41.00 Order no. Price UB-HDW $33.00 Order no. Description Price TBD-1-237ML 237ml $5.00 TBD-1-473ML 473ml $7.00 TBD-1-946ML 946ml $11.00 TBD-1-3785ML 3.785ml $30.00 Order no. Description Price TBD-2-237ML 237ml $6.00 TBD-2-473ML 473ml $10.00 TBD-2-946ML 946ml $15.00 TBD-2-3785ML 3.785ml $33.00 Order no. Description Price TBD-3-237ML 237ml $8.00 TBD-3-473ML 473ml $11.00 TBD-3-946ML 946ml $18.00 TBD-3-3785ML 3785ml $38.00 Order no. Price TBD-POL-355ML $17.00 Order no. Price TBD-LH-237ML $11.00
  • 126. Adhesives & Finishing Products 124 For more information & to shop online go to www.carbatec.com.au LIBERON PURE TUNG OIL Provides a hard wearing finish it is ideal for sur- faces such as kitchen worktops, tables and all high quality interior wood. Pure Tung Oil is a natural, non-toxic (EN71 approved) product which can be used on toys and objects in contact with food such. LIBERON SUPERIOR DANISH OIL WITH UV FILTER A blend of pure tung oil and natural oils which protect hard and soft woods. It is a penetrating oil, which brings out the natural grain of the tim- ber and provides a satin to gloss sheen. Superior Danish Oil may darken some timbers and blackening may occur on some external timbers. LIBERON EASY FRENCH POLISH A shellac and resin blended polish for use on small surfaces that is ideal for use on furniture, carved woodwork etc. Easy to use it is ideal for beginners and will beauti- fully enhance the wood’s natural finish. Always test product first on a spare surface. One litre covers approximately 8 to 10m2. Interior usage only. LIBERON BLACK BISON PASTE WAX Ideal for nourishing and protecting all types of wood, in- cluding lacquers and French polishes. Black Bison is well known for its quality and dis- tinctive, pleasant smell. It is traditionally used on antiques but is also suitable for use on modern furniture and will enhance the natu- ral beauty of wood whilst protecting it against dryness. LIBERON 0000 STEEL WOOL Produced using a high quality steel to create crumble and dust resistant wool that is virtually oil free. This high qual- ity steel wool is used for cleaning, preparing and maintaining wood and metal finishes. Specifically 0000 grade is used to cut back between coats of French polish, varnish and oil finishes. Used to clean and polish metals such as bronze, copper, chrome, stainless steel and aluminium. LIBERON DUST GRAB (TACK CLOTHS) Ideal for removing heavy dust from surfaces in the home, car or work- shop. Impregnated with a unique blend of res- ins dust readily adheres to the tacky face of the cloth. Pack of 10. LIBERON BUT- TON SHELLAC FLAKES These shellac flakes produce a golden brown coloured French Polish which is often used in an- tique restoration or bespoke production of furniture. 250g. WEST SYSTEM BRAND EPOXY A. B. C. D. E. F. G. 403 MICROFIBRE BLEND GAP FILLER A mix of cotton microfibre and colloidal silica used as a thickening agent for WEST SYS- TEM resin and hardener when used as an adhesive. VERITAS® CHAIR DOCTOR GLUE If a chair has a loose rung, an injection of Chair Doctor glue will first swell the rung and then bond it in position. LIBERON RETOUCH CRAYONS Used to fill scratches, nail holes, worm holes etc. in furniture and other wood- work. Rub the crayon across the scratch until it is filled, allow to harden then buff off the excess with a cotton cloth. TWO PACK TECHNIGLUE SYSTEM A thixotropic pre- filled epoxy gel, TECHNIGLUE Con- struction Adhesive cures at room tem- perature to form high strength, structural and waterproof bonds. TECHNIGLUE has a unique consist- ency perfect for filling any surface voids with- in the bonded joint and minimising run-out. TECHNIGLUE is a 2:1 product and must be mixed accordingly. Order no. Description Price LBN-014616 500ml $45.00 LBN-014617 1L $83.00 Order no. Description Price LBN-014642 500ml $38.00 LBN-014643 1L $59.00 Order no. Description Price LBN-014667 250ml $34.00 LBN-014668 500ml $62.00 Order no. Description Price LBN-070743 150ml, Clear $25.00 LBN-069970 500ml, Clear $39.00 LBN-070738 150ml, Neutral $25.00 LBN-069963 500ml, Neutral $39.00 LBN-070745 150ml, Medium Oak $25.00 LBN-069971 500ml, Medium Oak $39.00 Order no. Description Price LBN-015063 100g $12.00 LBN-015066 250g $20.00 Order no. Price LBN-015052 $35.00 Order no. Price LBN-014690 $48.00 Order no. Desc. Price A. WES-PS-51-1.2L 1.2L Pump Set $39.00 B. WES-105R-1L Epoxy Resin, 1L $44.00 C. WES-SH-200ML Hardener, 200ml $16.00 D. WES-105R-500ML Epoxy Resin, 500ml $30.00 E. WES-SH-100ML Hardener, 100ml $12.00 F. WES-MSY Mini Syringe Set $4.00 G. WES-105R-4L Epoxy Resin, 4L $125.00 H. WES-SH-800ML Hardener, 800ml $45.00 Order no. Size Price WES-MF-1L 1L Bag $12.00 WES-MF-4L 4L bag $38.00 WES-MF-12L 12L Bag $95.00 Order no. Size Price TGL-TGR-500ML 500ml resin $35.00 TGL-TGFH-250ML 250ml hardener $21.00 TGL-TGR-1L 1L resin $57.00 TGL-TGFH-500ML 500ml hardener $33.00 TGL-TGR-4L 4L resin $157.00 TGL-TGFH-2L 2L hardener $94.00 Order no. Description Price 05K99-01 2fl oz, 70g $13.00 05K99-04 4fl oz, 170g $16.00 Order no. Price LBN-014222 $20.00
  • 127. Woodcarving 125Want to see more? See our website for our full range of products. 6 PIECE ‘D SIZE’ TOOL SET Includes: D 1-8, D 1S-8, D 5-8, D 8-7, D 11-1 and D 12-2. 280g. 25 PIECE CARVING SET Set includes 80mm wooden mallet, 2 genu- ine Arkansas sharpening stones, honing oil, Brienz carving knife and 20 carving chisels. Carving tools included are: 1-16, 1S-16, 2-20, 3-3, 3-12, 3-25, 5-35, 7-20, 8-7, 8-18, 8-25, 9-7, 8A-18, 9-15, 7L-25, 11-2, 11-10, 15-3, 12-10 and 14-8. 3.1kg. 12 PIECE STARTER SET This set is ideal for the serious beginner. Set in- cludes: 1-8, 1S-8, 5-8, 5-20, 7-6, 7-14, 7L-20, 8-4, 8A-10, 9-10, 11-3, 12-6 and sewn reinforced canvas roll-up. 1.1kg. 8 PIECE STARTER SET This set is ideal for the serious beginner. Set includes: 1-12, 1S-12, 4-20, 5-12, 7-10, 9-4, 12-8, KNIFE-12 and sewn reinforced heavy canvas roll-up. 750g. PFEIL 4 PIECE ‘D SIZE’ BEGINNERS SET Starter set of D Series (smaller handles) chis- els and includes the following profiles: D 1-8, D 8-7, D 12-6 and Pfeil carving knife. 160g. A. PFEIL VIOLIN MAKER’S GOUGES B. PFEIL VIOLIN MAKER’S PURFLING PICK A. B. PFEIL LARGE HEAVY DUTY STRAIGHT DRAWSHAVE Overall length of 440mm, cutting edge 250mm. As above except thicker heavy duty blade steel with an average weight of 670g. PFEIL STRAIGHT DRAWSHAVE Overall length 310mm, 120mm cutting edge length, cherry handles, 120g. PFEIL CURVE HANDLED STRAIGHT DRAWSHAVE Overall length: 290mm, 110mm cutting edge length, cherry handles, 120g. PFEIL SCORP For hollowing out bowls, chairs etc. 80g. PFEIL LARGE CURVED DRAWSHAVE Overall length of 430mm, cutting edge 240mm. Cherry handles, supplied in a Goat- skin case. Avg. Weight: 450g. PFEIL 12 PIECE CARVING SET Set includes the following Pfeil chisels:D 1-8 D 1S-8, D 5-8, D 8-7, D 11-1, D 12-2, D 5-3, D 8A-7, D 9-5, D 9-10, D 11-3, D 12-8. PFEIL 18 PIECE ‘D SERIES’ WOODCARVING SET Great selection of the smaller ‘D Series’ Chisels. Set includes: D 1-8, D1s-8, D2-12, D 5-3, D 5-8, D 5-12, D 7-4, D 7L-10, D 7-14, D 8-7, D 8a-7, D 8-10, D 9-5, D 9-10, D 11-1, D 11-3, D 12-2, D 12-8. Approximate blade length: 85mm, Approximate overall length: 200mm. The manufacture of pfeil tools combines state-of-the-art technology with time- tested methods. pfeil is continuing to develop, produce and expand its assortment of Swiss quality tools. pfeil is today and in the future your leading manufacturer of carving tools. Order no. Price PF-SET-6N $175.00 Order no. Price PF-RLSET-25 $895.00 Order no. Price PF-RLSET-12 $445.00 Order no. Price PF-RLSET-8 $295.00 Order no. Price PF-SET-4 $102.00 Order no. Description Price PF-GL-1 270x30mm, 110g $102.00 PF-GL-2 235x15mm, 80g $98.00 PF-GL-3 205x12mm, 60g $92.00 Order no. Description Price PF-PURF 2mm cutting width $72.00 Order no. Price PF-DS-C $123.00 Order no. Price PF-DS-S $181.00 Order no. Price PF-DK-S $61.00 Order no. Price PF-DK-C $72.00 Order no. Description Price PF-SCORP 33mm $47.00 PF-SCORP65 65mm $85.00 Order no. Price PF-SET-12N $349.00 Order no. Price PF-SET-D18 $615.00
  • 128. Woodcarving 126 For more information & to shop online go to www.carbatec.com.au PFEIL VIOLIN MAKER’S KNIVES All knives are 160mm long. PFEIL HEAVY DUTY DRAYER GOUGES Slightly skewed edges, used for rough cut- ting. Double bevel for right or left use. Overall Length Approx: 300mm. PFEIL DRAKE TOOLS Designed at the woodcarving school in Dovre, Norway. Used to clean up carved let- tering and ornamental work. Blade length: 110mm, width: 5mm. Average weight: 45g. INDIVIDUAL REPLACEMENT PFEIL HANDLES PFEIL 6 PIECE LINO PALM SETS Palm chisel sets with Pear handles, ideal for small and detailed wood carving or lino print work. Tools are of the same high quality as all Pfeil carving tools, precisely ground and pol- ished. Overall length: 125mm. Blade length: 70mm. Approx. weight of kits for shipping purposes only: 220g. PFEIL 8 PIECE PALM CARVING TOOL SET This eight piece set is ideal for carving small- er pieces or for the beginner. Chisels have pear handles and are supplied in a Linden wood box. Blade length: 80mm. Set in- cludes: B 1-12, B 1S-12, B 3-12, B 5-12, B 8A-10, B 9-10, B12-8 and B 7-14. 850g. PFEIL 8 PIECE PALM CARVING TOOL SET This eight piece set is ideal for carving small- er pieces or for the beginner. Chisels have pear handles and are supplied in a Linden wood box. Blade length: 80mm. Set in- cludes: B 2-12, B 4-12, B 7L-12, B 8-10, B 9-7, B 11-7, B15-6 and B 25-10. 850g. PFEIL DELUXE 12 PIECE LINO PALM CARVING TOOL SET This is the largest set of Lino Palm Tools made by Pfeil. A deluxe carving set for fine detail work or those who prefer the feel of smaller handled chisels. These chisels have pear handles and are supplied in a Linden wood box, precisely ground polished and ready for use. Blade length: 70mm, Overall length: 125mm. Set includes: L 1-8, L 1s-8, L 1a-8, L 5-3, L 5-8, L 7-6, L 7-10, L 9-5, L 11-1, L 11-3, L 12-1, L-12a-4. Weight of Kit is approx. 1050g. PFEIL SCHALLER CARVING KNIVES Schaller knives have a crowned blade and rounded back so that they do not contact the work. Hence these knives can be used to carve concave curves and flat surfaces. Average weight for shipping 30g. A. B. PFEIL CANARD CARVING KNIVES For especially fine chip carving. Blades have straight cutting edges and are ground thin. Plum handles, Avg. wgt 30g. A. B. SET OF 4 KNIVES Supplied in canvas chisel roll. Contains, PF-SCHG, PF-SCHK, PF-CAG & PF- CAK. 220g. Order no. Blade Width/Weight Price PF-GM1 3.5mm/15g $19.00 PF-GM2 6mm/20g $19.00 PF-GM3 9mm/25g $19.00 PF-GM4 12mm/30g $19.00 PF-GM5 15mm/35g $19.00 PF-GM6 19mm/40g $19.00 Order no. Blade Width/Weight Price PF-D-50 50mm/310g $101.00 PF-D-60 60mm/350g $113.00 PF-D-70 70mm/390g $117.00 PF-D-80 80mm/430g $127.00 Order no. Description Price PF-DRAKE Straight Blade $43.00 PF-DRAKE-L Left Skew Blade $43.00 PF-DRAKE-R Right Skew Blade $43.00 Order no. Description Price PF-H1 135 x 21mm, 33g $12.00 PF-H2 135 x 22mm, 35g $10.00 PF-H3 135 x 24mm, 38g $10.00 PF-H4 135 x 26mm, 44g $10.00 PF-H5 135 x 28mm, 52g $10.00 PF-H6 135 x 30mm, 60g $10.00 Order no. Description Price PF-HB 160 x 36mm, 90g $19.00 Order no. Description Price PF-HD 115 x 20mm, 25g $10.00 Order no. Description Price PF-HL 54 x 36mm, 15g $12.00 Order no. Description Price PF-PALM-6-B L5-3, L7-6, L7-10, L9-5, L11-1 & L12-1 $137.00 Order no. Description Price PF-PALM-6-C L8-3, L8-7, L9-2, L11- 0.5, L12-4 & L15-2 $137.00 Order no. Price PF-SET-8A $233.00 Order no. Price PF-SET-8B $233.00 Order no. Price PF-PALM-12 $307.00 Order no. Average length Price A. PF-SCHG 175mm $29.00 B. PF-SCHK 160mm $29.00 Order no. Average length Price A. PF-CAG 175mm $29.00 B. PF-CAK 160mm $29.00 Order no. Price PF-RO-4 $159.00 Order no. Description Price PF-PALM-6-A L1-8, L1S-8, L1A-8, L5-8, L11-3, L12A-4 $137.00
  • 129. Woodcarving 127Want to see more? See our website for our full range of products. 1. STRAIGHT SHAFT CHISELS INDIVIDUAL CARVING CHISELS 1S. STRAIGHT SHAFT CHISELS 2. STRAIGHT SHAFT CHISELS 3. STRAIGHT SHAFT CHISELS 5. STRAIGHT SHAFT CHISELS 6. STRAIGHT SHAFT CHISELS 7. STRAIGHT SHAFT CHISELS W See full range of chisels online at www.carbatec.com.au Order no. Size/g Price PF-1-2 2mm/40g $31.00 PF-1-3 3mm/50g $31.00 PF-1-5 5mm/50g $31.00 PF-1-8 8mm/60g $31.00 PF-1-10 10mm/80g $33.00 PF-1-12 12mm/90g $33.00 PF-1-14 14mm/110g $33.00 PF-1-16 16mm/110g $33.00 PF-1-18 18mm/120g $39.00 PF-1-20 20mm/120g $39.00 PF-1-22 22mm/140g $39.00 PF-1-25 25mm/160g $48.00 PF-1-30 30mm/190g $56.00 PF-1-35 35mm/200g $58.00 PF-1-40 40mm/230g $63.00 Order no. Size/g Price PF-1S-2 2mm/40g $31.00 PF-1S-3 3mm/50g $31.00 PF-1S-5 5mm/50g $31.00 PF-1S-8 8mm/60g $31.00 PF-1S-10 10mm/80g $33.00 PF-1S-12 12mm/90g $33.00 PF-1S-14 14mm/105g $33.00 PF-1S-16 16mm/100g $33.00 PF-1S-18 18mm/120g $39.00 PF-1S-20 20mm/120g $39.00 PF-1S-22 22mm/140g $48.00 PF-1S-25 25mm/140g $48.00 PF-1S-30 30mm/170g $56.00 PF-1S-35 35mm/190g $58.00 PF-1S-40 40mm/220g $63.00 Order no. Size/g Price PF-2-2 2mm/50g $31.00 PF-2-3 3mm/50g $31.00 PF-2-5 5mm/50g $31.00 PF-2-8 8mm/70g $31.00 PF-2-10 10mm/80g $33.00 PF-2-12 12mm/70g $33.00 PF-2-14 14mm/100g $33.00 PF-2-16 16mm/100g $33.00 PF-2-18 18mm/120g $39.00 PF-2-20 20mm/120g $39.00 PF-2-22 22mm/140g $48.00 PF-2-25 25mm/140g $48.00 PF-2-30 30mm/170g $56.00 PF-2-35 35mm/190g $58.00 PF-2-40 40mm/240g $63.00 Order no. Size/g Price PF-3-2 2mm/40g $31.00 PF-3-3 3mm/40g $31.00 PF-3-5 5mm/50g $31.00 PF-3-8 8mm/60g $31.00 PF-3-10 10mm/70g $33.00 PF-3-12 12mm/80g $33.00 PF-3-14 14mm/100g $33.00 PF-3-16 16mm/100g $33.00 PF-3-18 18mm/115g $39.00 PF-3-20 20mm/120g $39.00 PF-3-22 22mm/140g $48.00 PF-3-25 25mm/150g $48.00 PF-3-30 30mm/170g $56.00 PF-3-35 35mm/170g $58.00 PF-3-40 40mm/215g $63.00 Order no. Size/g Price PF-5-2 2mm/50g $31.00 PF-5-3 3mm/50g $31.00 PF-5-5 5mm/50g $31.00 PF-5-8 8mm/60g $31.00 PF-5-10 10mm/80g $33.00 PF-5-12 12mm/90g $33.00 PF-5-14 14mm/90g $33.00 PF-5-16 16mm/100g $33.00 PF-5-18 18mm/105g $39.00 PF-5-20 20mm/110g $39.00 PF-5-22 22mm/130g $56.00 PF-5-25 25mm/140g $56.00 PF-5-30 30mm/170g $56.00 PF-5-35 35mm/180g $58.00 PF-5-40 40mm/215g $63.00 Order no. Size/g Price PF-6-20 20mm/120g $39.00 Order no. Size/g Price PF-7-2 2mm/50g $32.00 PF-7-4 4mm/50g $32.00 PF-7-6 6mm/60g $32.00 PF-7-8 8mm/80g $32.00 PF-7-10 10mm/70g $33.00 PF-7-12 12mm/90g $33.00 PF-7-14 14mm/90g $33.00 PF-7-16 16mm/115g $39.00 PF-7-18 18mm/120g $39.00 PF-7-20 20mm/120g $48.00 PF-7-22 22mm/130g $48.00 PF-7-25 25mm/140g $48.00 PF-7-30 30mm/170g $58.00 PF-7-35 35mm/210g $63.00 PF-7-40 40mm/235g $71.00
  • 130. Woodcarving 128 For more information & to shop online go to www.carbatec.com.au 8. STRAIGHT SHAFT CHISELS 9. STRAIGHT SHAFT CHISELS 11. STRAIGHT SHAFT CHISELS 12. 60° V STRAIGHT SHAFT CHISEL 13. 90° V STRAIGHT SHAFT CHISEL 7L. LONG BENT SHAFT CHISEL W See full range of chisels online at www.carbatec.com.au Order no. Size/g Price PF-8-2 2mm/50g $32.00 PF-8-3 3mm/50g $32.00 PF-8-4 4mm/50g $32.00 PF-8-7 7mm/60g $32.00 PF-8-10 10mm/60g $33.00 PF-8-13 13mm/100g $33.00 PF-8-16 16mm/110g $39.00 PF-8-18 18mm/120g $39.00 PF-8-20 20mm/135g $48.00 PF-8-22 22mm/140g $48.00 PF-8-25 25mm/150g $48.00 PF-8-30 30mm/180g $58.00 PF-8-35 35mm/230g $63.00 PF-8-40 40mm/245g $71.00 Order no. Size/g Price PF-9-1 1mm/50g $32.00 PF-9-2 2mm/50g $32.00 PF-9-3 3mm/50g $32.00 PF-9-4 4mm/55g $32.00 PF-9-5 5mm/50g $32.00 PF-9-7 7mm/60g $32.00 PF-9-10 10mm/80g $33.00 PF-9-13 13mm/110g $33.00 PF-9-15 15mm/110g $39.00 PF-9-18 18mm/140g $39.00 PF-9-20 20mm/160g $48.00 PF-9-22 22mm/170g $48.00 PF-9-25 25mm/180g $48.00 PF-9-30 30mm/210g $58.00 PF-9-35 35mm/250g $63.00 PF-9-40 40mm/265g $71.00 Order no. Size/g Price PF-11-0.5 0.5mm/40g $33.00 PF-11-1 1mm/40g $33.00 PF-11-1.5 1.5mm/40g $33.00 PF-11-2 2mm/40g $33.00 PF-11-3 3mm/50g $33.00 PF-11-4 4mm/50g $33.00 PF-11-5 5mm/50g $33.00 PF-11-7 7mm/70g $33.00 PF-11-10 10mm/80g $38.00 PF-11-12 12mm/120g $43.00 PF-11-15 15mm/130g $43.00 PF-11-18 18mm/150g $49.00 PF-11-20 20mm/180g $56.00 PF-11-25 25mm/200g $58.00 PF-11-30 30mm/220g $64.00 Order no. Size/g Price PF-12-1 1mm/50g $36.00 PF-12-2 2mm/50g $36.00 PF-12-3 3mm/50g $36.00 PF-12-4 4mm/50g $36.00 PF-12-6 6mm/60g $36.00 PF-12-8 8mm/70g $41.00 PF-12-10 10mm/100g $41.00 PF-12-12 12mm/110g $49.00 PF-12-14 14mm/110g $49.00 PF-12-20 20mm/190g $81.00 Order no. Size/g Price PF-13-1 1mm/50g $36.00 PF-13-2 2mm/50g $36.00 PF-13-3 3mm/50g $36.00 PF-13-4 4mm/50g $36.00 PF-13-6 6mm/60g $36.00 PF-13-8 8mm/70g $41.00 PF-13-10 10mm/100g $41.00 PF-13-12 12mm/110g $49.00 PF-13-14 14mm/110g $49.00 PF-13-20 20mm/190g $81.00 PF-13-30 30mm/210g $81.00 Order no. Size/g Price PF-7L-4 4mm/50g $38.00 PF-7L-6 6mm/55g $40.00 PF-7L-10 10mm/70g $40.00 PF-7L-14 14mm/90g $40.00 PF-7L-18 18mm/110g $45.00 PF-7L-20 20mm/110g $48.00 PF-7L-25 25mm/140g $53.00 PF-7L-30 30mm/170g $63.00 PF-7L-35 35mm/220g $63.00
  • 131. Woodcarving 129Want to see more? See our website for our full range of products. CHIP CARVING KNIVES Finest quality steel, ground and polished, ready for use. Cherry wood handles. Aver- age overall length 160mm. Average weight for shipping purpose: 30g. A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. BRIENZ CARVING KNIFE LARGE Overall length 185mm. 30g. BRIENZ CARVING KNIFE LARGE Overall length 175mm. 30g. FLEXCUT MICRO PALM SET Designed for extreme detail used in netsu- ke or caricature carving. These tools have their edges forged down even thinner than our other palm tools. The 45° V-tool offers a deep, dark, visible cut while keeping an ultra narrow width. 360g. FLEXCUTTM CARVING KNIFE SET Our four most pop- ular carving knives together in one set, complete with tool roll. 230g. FLEXCUTTM DELUXE PALM SET This set is a combination. The regular palm for detail and the wide format for roughing- out makes this a great collection in one con- venient box. 725g. FLEXCUTTM PORTABLE CARVING SET Excellent for the trav- elling carver. The set consists of a palm handle & ten inter- changeable blades. 725g. FLEXCUTTM STARTER CARVING SET The most c o m p l e t e carving set all in one box. It has everything you need, whether it be for mallet, palm, or knife carving. The 16 gouge profiles featured in this kit are not included in any other SK carving set. 950g. FLEXCUTTM 4 PIECE SCORP SET Our new Scorp set puts all of our profiles into one handy tool roll. As an added bonus each set includes a spe- cially shaped strop (compound not included) to help maintain the edge. 230g. FLEXCUT PALM SET has three curved gouges, a v-tool and a skew chisel. Perfect for the beginning carver or an ideal choice for the seasoned carver who needs smaller tools for more detailed, controlled work. FLEXCUT MINI PALM SET As the name implies, this set was made for miniature carving. Model makers and those who enjoy carving fine details will find these tools quite handy. FLEXCUT CHIP CARV- ING SET Features our Chip Carving Knife, Mini-Chip Knife and Skew Knife. Everything you need to create the intricate geometric or freestyle patterns that are the hallmark of the craft. Lettering is also very much part of the art form. FLEXCUT BEGINNER PALM AND KNIFE SET Our Begin- ner Palm & Knife Set is a great way to get started carving today. We have packaged our most popular palm tools and knives from our product line. Each set includes: KN12 Cut- ting Knife, KN13 Detail Knife, FR307 V-Tool and FR306 Gouge. FLEXCUT DETAIL KNIFE SET An excellent start to any knife kit. Razor sharp and comfortable to use, these will be favourites from the start. Includes a mini chip knife, mini detail knife and the ex- tremely popular pelican knife as well as a block of Flexcut Gold honing compound. Order no. Price A. PF-KNIFE-1 $21.00 B. PF-KNIFE-2 $21.00 C. PF-KNIFE-3 $21.00 D. PF-KNIFE-4 $21.00 E. PF-KNIFE-5 $21.00 F. PF-KNIFE-6 $21.00 G. PF-KNIFE-7 $21.00 H. PF-KNIFE-8 $21.00 I. PF-KNIFE-9 $21.00 J. PF-KNIFE-10 $21.00 K. PF-KNIFE-11 $21.00 L. PF-KNIFE-12 $21.00 M. PF-KNIFE-13 $21.00 N. PF-KNIFE-14 $23.00 O. PF-KNIFE-15 $23.00 Order no. Price PF-BRIE-G $25.00 Order no. Price PF-BRIE-K $25.00 Order no. Price FLX-FR-804 $83.00 Order no. Price FLX-KN-100 $104.00 Order no. Price FLX-FR-405 $146.00 Order no. Price FLX-SK-107 $115.00 Order no. Price FLX-SK-108 $220.00 Order no. Price FLX-KN-150 $94.00 Order no. Price FLX-FR-310 $94.00 Order no. Price FLX-FR-604 $83.00 Order no. Price FLX-KN-115 $69.00 Order no. Price FLX-KN-600 $83.00 Order no. Price FLX-KN-400 $79.00
  • 132. Woodcarving 130 For more information & to shop online go to www.carbatec.com.au ECONOMY RIFFLER FILE SET Normally a similar 10 piece set would cost 3 to 4 times our price. These wood files are high carbon, hardened steel. Length 180mm. 300g. 200MM WOOD RASP SET These rasps are double- sided, very sharp and cut aggressively. Use with caution! 620g. CARBA-TEC® CARVING DISCS FINE DISC With tungsten carbide flakes, the coarse disc (24 grit) is more aggressive than the fine disc. Suits most 4” grinders. Arbor size 22mm. 120g. PFEIL ARKANSAS SLIP STONES Complete set of four slip stones in various shapes, suitable for all carving chisels, goug- es. Used with honing oil. 175g. ARCHERTM 30 PIECE DIAMOND BURR SET Burrs have 2.4mm shanks and are ideal for a myriad of jobs. CARVER’S VISE MEDIUM DUTY Ideal for small to me- dium carvings. Carvings are easily mounted to the pre-drilled face plate with wood screws. The face plate can be raised, lowered, tilted and ro- tated to allow full access to your work. Can be mounted to a benchtop up to 100mm thick. CARBA-TEC® HEAVY DUTY BENCH MOUNTED CARVERS VISE For heavy duty carving use. Features tilt & swivel head lock, removable faceplate and lock- ing swivel mechanism. 7 PIECE JAPANESE CARVING CHISEL SET Set contains: 4 x goug- es, 1 x skew, 1 straight and 1 x v-chisel. 240g. FLEXCUT WHITTLERS KIT Grab your rocking chair and whistle a tune while enjoying the use of these whittling knives. Made specifically for hand carving, these knives are razor sharp and are very comfortable to hold. Set includes sharpen- ing compound. FLEXCUT 14 PIECE RECIPROCATING GOUGE SET Flexcut quality attachments that plug directly into most reciprocating power carvers. Set includes 9 gouges, 3 v-tools and 2 veiners. JAPANESE 5 PIECE ECONOMY SET Supplied in an attractive gift box, this set contains five useful profiles suitable for relief carving. Made from quality high carbon steel with rubberised grips. Includes formed stone for blade hon- ing. FLEXCUTTM SLIP- STROP KIT This wooden form has been spe- cially profiled to allow for pol- ishing and deburr- ing the hard to reach areas on the inside of V-tools and gouges. Kit quickly polishes all hardened steels. 130g. FLEXCUTTM GOLDTM POLISHING COMPOUND Specially formulated to apply like a crayon. Its blend of aluminium and titanium oxide provide a balance between aggressive re- moval of hardened tool steel and offering a high-colour polish. 130g. FLEXCUTTM WHITTLIN’ JACK CARVING KNIFE Features a Detail Knife and Roughing Knife yet weighs in at only 85g. It’s just over 10cm long when closed, so it neatly fits in your pocket. FLEXCUT DRAWKNIFE This draw knife has 5 inches of workable edge, designed to flex around contours where large amounts of stock need to be removed quickly. The curved edge gives a skew-like cutting action for a low resistance cut. 125g. FLEXCUT DELUXE PALM & KNIFE SET Includes four razor-sharp carving knives, a cutting knife, pelican knife, detail knife, and mini-detail knife. There are five palm tools including a skew, V-tool, and three gouges in 1/8, 5/16, and 3/8-inch sizes. FLEXCUT BEGINNER CARVER KIT Two carving blades plus an interchangeable ABS handle. A basswood blank for the leaf carving project and a second blank for practicing cuts are included. Order no. Price 7508 $22.00 Order no. Price WRS-3PCE $17.00 Order no. Description Price CD-4 Fine $12.00 Order no. Price PF-ARK-SET $91.00 Order no. Price DP-30 $10.00 Order no. Price CV-01 $115.00 Order no. Price CV-236 $115.00 Order no. Price PGC-7 $67.00 Order no. Price FLX-KN-300 $52.00 Order no. Price FLX-RG-100 $157.00 Order no. Price Z-1380 $31.00 Order no. Price FLX-PW-12 $20.00 Order no. Price FLX-PW-11 $12.00 Order no. Price FLX-JKN-88 $66.00 Order no. Price FLX-KN-16 $52.00 Order no. Price FLX-KN-700 $209.00 Order no. Price FLX-SK-111 $55.00
  • 133. Woodcarving 131Want to see more? See our website for our full range of products. SQUARE MICROPLANE® Designed for general shaping and smoothing where larger blades will not fit. It is also excellent for cutting flat bottomed notches and triangular grooves. ROUND MICROPLANE® Used to enlarge holes and shape inside curves, but cuts much faster and leave a smoother finish than any similar tools. 8” & 3” SNAP-IN MICROPLANE® WITH REPL. BLADE The 3“ Microplane® Snap-In Tools allow for delicate detail work with- out having to worry about applying too much pressure and breaking the tool. Features the replaceable, reversible blade insert design. Blades made from high quality hardened stainless steel for long last- ing use. ROTARY SHAPERS Prepare to enjoy shaping with more control and precision. Each drum has been designed to in- clude replaceable blade with a new improved tooth pattern to prevent, not minimize clogging. For use in drill presses only at speeds up to 2500rpm. Not for use in routers. MP-32018 3” Coarse Round MP-32019 3” Coarse Angle MP-32020 3” Fine Flat MP-32021 3” Fine Round MP-32022 3” Fine Angle MP-32001 8” Coarse Round MP-32002 8” Coarse Angle MP-32003 8” Fine Flat MP-32004 8” Fine Round MP-32005 8” Fine Angle 8” & 3” BLADES TO SUIT SNAP-IN MICROPLANE FLEXIBLE RASP FOR 12” HACKSAW FRAME The Microplane® Flexible Hacksaw Blade is best for smoothing convex surfaces and rounding sharp edges. If it is stretched tight in a hacksaw frame, it is flat and fast cutting. If the frame tension is de- creased, the blade will bend slightly around a convex surface for a smooth blended cutting action. Dimensions: 12” x 1 5/16” x 1/16”. HALF ROUND RASP FOR 12” HACKSAW FRAME The Microplane® Half Round Hacksaw Blade is the best tool for smoothing and shaping large inside curves. It also works remarkably well as a general purpose blade. The half round blade is nearly as stiff and fast cutting as the Microplane® Rigid Blade. Dimen- sions: 12” x 1 3/16” x 1/4” TWO-IN-ONE SAW FOR 12” HACKSAW FRAME The Microplane® Two-in-One Saw Blade cuts wood, plastics, composites and other nonmetallic materials. The patented process creates extremely sharp teeth that cut swiftly and accurately. Dimensions: 12” x 1 5/8”. REPLACEMENT SURFORM BLADE Razor sharp, stainless Microplanes are perfect for shaping wood, plastics, rubber, auto body fillers, vinyl or asphalt tile, composites and other non-metallic materials. Used with a ’draw-filing’ technique that provides a smooth shaving action. VERITASTM CARVER’S VISE A good carver’s vise should be adjustable in all three axes. This one has full rotation in two axes and 3” of height adjust- ment in the third axis. More importantantly, it has controlled re- lease; when the clamping pressure is relieved, a combination of internal springs and o-rings provides residual resistance so that your work does not suddenly fall or rotate. For quick inter- change of workpieces, spare 3-1/2” dia. mounting plates are available. Order no. Description Price MP-30019 Small-3-7/8”x7/32”, 30g $14.00 MP-30012 Large-8”x1/2”, 100g $20.00 Order no. Description Price MP-30018 Small- 3-3/8”x11/32”dia. 30g $15.00 MP-30011 Large-8”x5/8”dia. 100g $20.00 Order no. Description Price MP-32000 8” $20.00 MP-32016 3” $14.00 Order no. Description Price MP-30043 1” Rotary Shaper $20.00 MP-30042 1” Repl. Blade $13.00 MP-30041 2” Rotary Shaper $20.00 MP-30040 2” Repl. Blade $14.00 Order no. Description Size Price MP-32003 Fine-cut, flat blade 8” $15.00 MP-32004 Fine-cut, half round 8” $15.00 MP-32005 Fine-cut, right angle 8” $15.00 MP-32006 Coarse, flat 8” $15.00 MP-32001 Coarse, half round 8” $15.00 MP-32002 Coarse, right angle 8” $15.00 MP-32018 Coarse, round 3” $11.00 MP-32019 Coarse, angle 3” $11.00 MP-32020 Fine, flat 3” $11.00 MP-32021 Fine, round 3” $11.00 MP-32022 Fine, angle 3” $11.00 MP-32026 Coarse, flat 3” $11.00 Order no. Price MP-30002 $20.00 Order no. Price MP-30010 $20.00 Order no. Price MP-30003 $23.00 Order no. Price MP-30004 $20.00 Order no. Description Price 05G20-01 Carver’s Vice $133.00 05G20-02 Dog Hole Mount $16.00 05G20-03 3-1/2” Plate with Rod $33.00 05G20-04 2” Mounting Plate $20.00
  • 134. Woodcarving 132 For more information & to shop online go to www.carbatec.com.au ARCHERTM POWER CARVING KIT 1/4hp variable speed motor with precision foot controller, adjusts motor speed from 0 - 20,000 rpm. Includes rotary handpiece with 3 jaw preci- sion chuck, capacity of 0 - 4mm. Ideal for rotary carving, polishing, grinding and buff- ing, etc. 4.7kg. PROFESSIONAL CARVERS KIT As shown, kit includes: 1/8hp, 18,000rpm motor with reversing switch, variable speed foot con- trol, #44T handpiece with 3/32” (2.35mm), 1/8” (3.2mm) and 1/4” (6.35mm) collets, plus a 12 piece selection of carving and grinding bits. PFEIL LEATHER STROP Premium fine calf leather mounted on a wooden block. B. A. 600MM MAGNETIC BAR (600mm) in length. One of the most useful workshop accessories we’ve ever found. MINI GRINDER Has been designed to compliment the Ar- bortech 100mm (4”) range of woodworking blades. The tool utilises small 50mm (2”) accessories, which when fitted to the Mini- Grinder allow incredible access and control. Kit includes four sanding discs and one spare cutting blade. 1.83kg. 1. INDUSTRIAL SHAPER Similar to Woodcarver Pro but with replacea- ble tungsten carbide teeth, making it suitable for use on a wider range of materials. 240g. 2. INDUSTRIAL TEETH & SCREWS Replacement for ARB-IND100. 3. WOODCARVER PRO-4 A universal tool for trades people, crafts peo- ple & sculptors. Ideal for sculpting, carving & cutting. 4. MINI TCT BLADE Resharpenable 50mm blade. 55g. 5. MINI GRINDER DIAMOND BLADE 50mm blade for cutting or grinding tiles, stone and most masonry products. 45g. 6. MINI GRINDER BLADES Mini versions of the Woodcarver Pro 4. 50mm diameter. Pack of two. 45g. 7. TUFF-CUT BLADE 115mm diameter blade with re-sharpenable tungsten teeth. Perfect for heavy duty work. INDUSTRIAL SHAPER KIT Kit includes one industrial cutter blade (replaceable tungsten carbide teeth) plus one Pro Guard. POWER CHISEL Combines power and control to give you the smoothest and quick- est chisel action for any sized project, bring- ing the field of pow- er reciprocating carvers to a whole new level! A versatile tool for wood carvers, sculptors, tradesmen and DIY, the Power Chisel will create precision joints, easy recesses, and precise corners in minutes. PRO KIT Kit includes one Woodcarver Pro 4 cutter blade and 1 Pro Guard. This blade may be sharpened with a chainsaw file - available seperatley. ARBORTECH® 5 PIECE CHISEL ACCESSORY STARTER SET Good basic selection suitable for most projects. The Starter Kit is designed to al- low a wide a range of carving and chiselling tasks as possible. Use the large gouges for rapid and exact wood removal over large surfaces. The “V” tool and small gouge are ideal for detailed projects. Set Includes; 8mm 60 degree V gouge, 3 x 20mm gouge, 9 x 13mm gouge, 11 x 7mm gouge, 5 x 12mm gouge. 1. 2. 3. 4. 5. 6. 7. Order no. Desc. Price ARB-MIN300 Grinder $275.00 ARB-MIN003 Repl. Belt $29.00 Order no. Price ARB-IND100 $157.00 Order no. Price ARB-IND012 $60.00 Order no. Price ARB-WCB400 $51.50 Order no. Price ARB-MIN012 $33.00 Order no. Price ARB-MIN016 $26.00 Order no. Price ARB-MIN001 $21.00 Order no. Price ARB-IND115 $79.00 Order no. Price ARB-IND200 $173.00 Order no. Price ARB-WCB500 $69.00 Order no. Price ARB-PCH030 $129.50 Order no. Desc. Price ARB-PCH300 Power Chisel $275.00 ARB-PCH100 Extension $179.00 Order no. Description Price CT-33 Kit $295.00 CT-24901 Stand $39.00 Order no. Price FOR-5240 $525.00 Order no. Description Price A. PF-ST-R1 120mm long $41.00 B. PF-ST-R2 Double Sided 150mm $72.00 PF-POLC Polishing Cream $31.00 Order no. Price ES-10024 $31.00 8. TURBO PLANE Universal wood shaping blade. Excellent control and balance. (Not shown). Order no. Price ARB-IND400 $159.00
  • 135. Pens, Clocks & Craft 133Want to see more? See our website for our full range of products. A. SILVER PLATE SALT & PEPPER INSERTS B. STAINLESS STEEL SHAKER TOPS Simply drill a 32mm diameter hole and clip the spring sided tops in. D. CERAMIC SALT/PEPPER MILL MECHANISM The latest and greatest innovation in spice grinding is ceramic mill components. Ceramic mills have the advantage of handling both salt, and pepper with the one mechanism. They are rustproof, with stainless steel components and an aluminium rod, and are available in a variety of popular sizes. Full instructions are provided. C. EASIGRIND EASY FIT SALT/PEPPER MILL MECHANISM Carba-Tec® introduces the Easigrind easy fit ceramic mill mecha- nism. Featuring a preassembled top quality mill and hidden top screw. Salt / Pepper / Spice mills can be produced with only a few tools by drill the blank with Forstner style bits, and turning to the desired external shape. Quick and easy construction and assembly. Supplied as a universal (Salt, Pepper or Spice) mill, with one length that can be shortened by simple cutting the drive rod. Adjustable grind and rust/corrosion proof construction. PEWTER COLOURED POTPOURRI LIDS A. B. C. D. E. F. G. RARE EARTH MAGNETS Used in boxmaking as a con- cealed lid catch and many other purposes. Available by road freight only. HOT WIRE PROFESSIONAL PYROGRAPHY SET Made in Germany. Stepless electronic with constant temperature control, infinitely variable between approx. 350°C and 800°C. 230v- 30watts. Powerful enough for shading. Suitable for use on wood, cork and leather. PYROGRAPHY PEN SETS German made hot poker units, 230v, 26 watts. A. The pen by itself plus one combination brass drawing/calligraphy tip. B. This deluxe kit comes in a wooden box, incl. extras: 4 brass tips, screwdriver, tweezers, wire brush, pattern book and a metal tray for storing hot tips. IRONCORE® VARIABLE TEMPERATURE PYROGRAPHY SET Australian made heavy duty woodburning unit. Features an infinitely variable heat. Set includes two wire nibs, heavy duty handpiece with separate transformer with a handpiece rest on top of the unit. Suit- able for any level of woodburning. A. B. C. D. PEWTER POTPOURRI LIDS A. B. D. C. Order no. Description Price SP-7050 Tube Approximately 25 x 55mm. 60g. $14.00 Order no. Description Price ST-35 Overall dia. 35mm. Pack of 6. 30g. $13.00 Order no. Description Price GRIND-7 7”/178mm $9.00 GRIND-10 10”/254mm $9.00 GRIND-12 12”/305mm $9.00 GRIND-17 17”/432mm $9.00 Order no. Price EASIGRIND-17 $19.00 Order no. Description Diameter Price A. PL-3 Hummingbird 80mm $5.00 B. PL-1 Roses 80mm $5.00 C. PL-6 Butterfly 80mm $5.00 D. PL-5 Basket 80mm $5.00 Order no. Description Price REM-3310 3mm dia. x 3mm thick, pk 10. $7.00 REM-5310 5mm dia. x 3mm thick, pk 10. $8.00 REM-8310 8mm dia. x 3mm thick, pk 10. $13.00 REM-8510 8mm dia. x 5mm thick, pk 10 $14.00 REM-10310 10mm dia. x 3mm thick, pk 10 $15.00 REM-10510 10mm dia. x 5mm thick, pk 10. $17.00 REM-1936 19mm dia. x 3mm thick, pk 6 $18.00 Order no. Price C. LT-5216-45-02 $249.00 Order no. Description Price A. LT-5026-45-01 Pen with one tip $62.00 B. LT-5027-45-08 Pen in wooden box with extras $83.00 Order no. Price D. IC-1 $259.00 Order no. Description Diameter Price E. PL-7 Brolga 85mm $12.00 F. PL-8 Iris 85mm $12.00 G. PL-9 Kookaburra 85mm $12.00
  • 136. Pens, Clocks & Craft 134 For more information & to shop online go to www.carbatec.com.au PEN MILL Trims and squares wood and brass tubes for pen making. Suitable for Pen - 1, Pencil - 1, Pen-1- AUS. NOTE: Sold without handle. 40g. QUICK ACTION SELF-CENTRING PEN BLANK DRILLING JIG This improved version of our pen blank vise drills in the exact centre of your pen blanks. The vise jaws move in and out to- gether ensuring a precisely drilled hold in the centre of your pen blank. 1.84kg. MORSE TAPER 1/4” PEN MANDREL SET Either mandrel can be unscrewed from the MT and used in a drill chuck if preferred. MICRO-MESHTM Micro-MeshTM is a long lasting cloth backed sanding product that is applied to a foam cushion layer. The paper itself is much like wet and dry but the addition of the cushion layer allows more control of the cutting ac- tion. While all sandpaper creates a scratch pattern the Micro-MeshTM pattern is very fine promoting consistent sanding and extraor- dinary levels of gloss in acrylics and wood alike. WOODEN PEN BLANK PACKS Nominal size: 126mm x 15mm x 15mm. All blanks are pre-drilled to 7mm. PEN PRESS The perfect helper when wanting to press those tight fitting pen components together. The unit adjusts easily to fit any pen kit. Ap- plies up to 130kg of pressure. Clamps easily to a bench. DELUXE PEN MANDREL 2MT The advantages of this pen mandrel design are that spacers are no longer neces- sary to make up the difference between the length of the pen blanks and the mandrel. This also helps to eliminate any vibration en- countered when turning blanks on a longer than necessary mandrel shaft. COLTTM PEN DRILLS Top quality M2 steel is used to produce these bits that drill quickly and accurately in pen materials like acrylic and timber. Cuts 6 times faster & clears chips better. CMT HIGH CARBON & HSS BRAD POINT DRILLs Bits have fine cutting edges and brad pointed tips to minimise tearout. Made in Germany. ACRYLIC PEN BLANKS Nominal size: 152mm x 16mm x 16mm. 3.2.1. 4. 15.14.13 16. 7. 6.5. 8. 19. 18.17. 20. 11.10. 9. 12. 23.22. 21. 24. Order no. Price PEN-MILL $25.00 Order no. Price CT-PV4 $79.00 Order no. Description Price MAND-91 No. 1 MT $16.00 MAND-92 No. 2 MT $16.00 SLEEVE-6 Brass repl. bush $12.00 Order no. Price SP-MMESH-SET $25.00 Order no. Description Price WPP-1 Curly Jarrah, Goldfields Burl, Flame Sheoak, Woody Pear Lace Sheoak $11.00 WPP-2 Western Rosewood, Banksia, Black Palm, Lace Sheoak, Birdseye Sheoak $11.00 WPP-3 Sandalwood, Macassar Ebony, Black Palm, Western Rosewood, Huon Pine $12.00 WPP-4 Cocobolo, Imbuia (Brazil- ian Walnut) Purple Heart, Marfin and Brazilwood $14.00 WPP-5 Padouk, Wenge, African Ash, Bubinga, Sapele (African Mahogany) $12.00 Order no. Price CT-PAP1 $59.00 Order no. Price AXM-211323 $83.00 Order no. Price COLT-10150700 $15.00 Order no. Desc. Price 517-070-31 Carbon Steel $10.00 516-070-51 HSS $16.00 Order no. Price 1. APB-F1069 $4.00 2. APB-AS35 $4.00 3. APB-AS56 $4.00 4. APB-AS116 $4.00 5. APB-AS93 $4.00 6. APB-AS37 $4.00 7. APB-AS72 $4.00 8. APB-AS73 $4.00 9. APB-AS74 $4.00 10. APB-S83 $4.00 11. APB-AS128 $4.00 12. APB-S42 $4.00 13. APB-AS70 $4.00 14. APB-S26 $4.00 15. APB-S27 $4.00 16. APB-S28 $4.00 17. APB-S29 $4.00 18. APB-S41 $4.00 19. APB-S01 $4.00 20. APB-S09 $4.00 21. APB-AS188 $4.00 22. APB-AS190 $4.00 23. APB-AS191 $4.00 24. APB-AS192 $4.00
  • 137. Pens, Clocks & Craft 135Want to see more? See our website for our full range of products. PEN HOLDERS/BOXES Pens shown not included. A. B. C. D. WOODEN PEN BOXES Pens shown not included. A. B. C. D. VELVET SLEEVES Economical alternative to more expensive box presentation cases. Pens not included. Pack of 10. Weight: 30g. B. A. BALL POINT PEN PARTS Gold plated, not epoxy coated, 100g pack. 1/4” mandrel required. Pack of 5. BALL POINT PEN PARTS 100g pack. 1/4” mandrel required. Pack of 5. BALL POINT PEN PARTS (AUSTRALIA CLIP) 100g pack. 1/4” mandrel required. Pack of 5. BALL POINT PEN PARTS 100g pack. 1/4” mandrel required. Pack of 5. BALL POINT PEN PARTS (CLICK MECHANISM) 100g pack. 1/4” mandrel required plus BUSH-9. Pack of 5. BALL POINT PEN PARTS 140g pack. 1/4” mandrel required plus BUSH-BT. Pack of 5. BALL POINT PEN PARTS 140g pack. 1/4” mandrel required plus BUSH-BT. Pack of 5. COMFORT STYLE BALL POINT PEN PARTS 100g pack. 1/4” mandrel required plus BUSH-8. Pack of 5. COMFORT STYLE PENCIL PARTS 100g pack. 1/4” mandrel required plus BUSH-8. Pack of 5. ROLLER BALL PEN PARTS - CLIP ON CAP 100g pack. 1/4” mandrel required plus BUSH-2-3. Pack of 5. DELUXE PEN PARTS 40g pack. 1/4” mandrel required plus BUSH- JR. Platinum coated. Sold individually. WOODEN PEN BOXES Bubinga/Maple pen/pencil boxes, useful for presentation or storage. Two styles available. A. B. ROLLERBALL PEN PARTS 170g pack. 1/4” mandrel required. Pack of 5. PENCIL PARTS 100g pack. Sold in pack of 5. 1/4” mandrel required (MAND-91 or MAND-92). TYCOON STYLE ROLLERBALL PEN PARTS - GOLD Requires 1/4” mandrel and BUSH-6. Sold individually. Picture shows rhodium finish. SLIMLINE BALL POINT PEN PARTS Requires 1/4” mandrel and BUSH-8. Sold in packs of five. 48 PLACE DELUXE PEN BOX Pens not included. 560g. Order no. Description Price A. C-04 1 place case $1.00 B. C-05 1 or 2 place case $2.00 C. C-06 1, 2 or 3 place case $6.00 D. C-07 1 or 2 place case $4.00 Order no. Description Price A. PB-01M Single Maple $6.00 B. PB-02M Double Maple $6.00 C. PB-01R Single Rosewood $6.00 D. PB-02R Double Rosewood $6.00 Order no. Description Price A. VS-BLUE Blue $4.00 B. VS-BLACK Black $4.00 Order no. Price PEN-1N $12.00 Order no. Price PEN-1 $17.00 Order no. Price PEN-1-AUS $17.00 Order no. Price PEN-1V $23.00 Order no. Description Price PEN-9 Pen Parts $32.00 BUSH-9 Bush $9.00 Order no. Description Price BT-401 Gold Finish $29.00 BUSH-BT Bush $14.00 Order no. Description Price RL-101 Pen Parts $43.00 BUSH-2-3 Bush $10.00 Order no. Description Price BT-401P Platinum $39.00 BT-401BT Black TiN $45.00 BUSH-BT Bush $14.00 Order no. Description Price PEN-8RH Rhodium Finish $33.00 BUSH-8 Bush $8.00 Order no. Description Price PENCIL-8RH Rhodium Finish $47.00 BUSH-8 Bush $8.00 Order no. Description Price PEN-JR-R Roller Ball $29.00 PEN-JR-F Fountain $33.00 BUSH-JR Bush $11.00 Order no. Price PEN-2 $22.00 Order no. Price PENCIL-1 $35.00 Order no. Price PEN-6GR $12.00 Order no. Description Price PEN-7RH Rhodium finish $30.00 PEN-7BT Black TiN finish $27.00 Order no. Price C-08 $42.00 Order no. Description Price A. BOX-7 Flip Top Lid $10.00 B. BOX-15 Sliding Lid $12.00
  • 138. Pens, Clocks & Craft 136 For more information & to shop online go to www.carbatec.com.au CLOCK INSERTS A. B. C. D. PLASTIC CLOCK INSERT HYGROMETERS A. B. C. D. THERMOMETERS A. B. C. BAROMETERS A. B. A. B. C. COMBINATION THERMOMETERS/HYGROMETERS/ BAROMETERS/CLOCKS SOLID BRASS 40 YEAR CALENDAR Shows dates from 1996 to 2035. Solid brass, 63mm diameter. 18 PLACE PEN ROLL This pen roll is beautifully finished in black velvet, designed to enhance the features of your individually handmade pens. Dimensions: 540mm long, pen pocket is 140mm high. 75g. PROFILE MASTER Allows accurate out lining of various shapes and forms. Great for copying dif- ficult moulding profiles, or creating your own templates. Comes in two sizes, 125mm and 250mm. Order no. Description Diameter Weight Price A. SC-90C Clock insert 90mm 76g $33.00 B. IS-7-GA Clock insert Fit up 100mm 180g $18.00 C. IS-7-GR Clock insert Fit up 100mm 170g $18.00 D. S-90C Clock insert - AA battery not included 98mm 75g $26.00 Order no. Description Diameter Weight Price S-50C Plastic Roman Clock insert SR626SW battery included 50mm 10g $19.00 Order no. Description Diameter Weight Price A. TE-1073 Hygrometer-Brushed Gold 70mm 50g $30.00 B. H-085 Hygrometer - Solid Pol- ished Brass Bezel, white face and glass cover. Sur- face mount type - Made in Germany 85mm 150g $88.00 C. S-36H Hygrometer - Plastic - Bat- tery required 36mm 10g $14.00 D. S-106H Hygrometer - AA battery not required 106mm 55g $29.00 Order no. Description Diameter Weight Price A. S-36T Thermometer - Plastic - Battery not required 36mm 10g $11.00 B. TE-1072 Thermometer - Brushed Gold 70mm 80g $28.00 C. T-085 Thermometer - Solid Pol- ished Brass Bezel, white face and glass cover. Sur- face mount type - Made in Germany 85mm 190g $77.00 Order no. Description Diameter Weight Price A. TE-1071 Barometer - Brushed Gold 70mm 70g $44.00 Order no. Description Diameter Weight Price A. TH-070 Thermometer/Hygrometer 70mm 110g $73.00 A. TH-085 Thermometer/Hygrometer 85mm 150g $80.00 B. C-070 Clock with Quartz Move- ment 70mm 130g $80.00 B. C-085 Clock with Quartz Move- ment 85mm 170g $84.00 C. B-070 Barometer 70mm 110g $84.00 C. B-085 Barometer 85mm 170g $97.00 Order no. Price CB-63 $7.00 Order no. Price PR-7029 $16.00 Order no. Description Price PCG-908 Contour Gauge 125mm $13.00 PCG-908A Contour Gauge 250mm $20.00
  • 139. Pens, Clocks & Craft 137Want to see more? See our website for our full range of products. MINI SIZE QUARTZ CLOCK Made in the U.S.A. Dimensions: 2-1/8”x21/8”x5/8”, Shaft diameter 5/16”, On/Off switch, front loading hanger, step second hand, re- quires “AA” battery, (Not included) Accurate to within 10 seconds per month. A. B. C. D. E. F. G. H. I. J. Step 1. Choose our Quartz Clock Movement Price includes: • Face Numbers (choose from next page) • Hour, minute and second hand (choose from step 2) • Hanger • Nuts • Washer Step 2. Choose your Hour & Minute Hands Step 3. Choose your Sweep Second Hands A. B. C. D. E. F. Step 4. Choose your Clockface Numbers All numbers come with adhesive backs, and are available in either black or gold. Please specify your preference when ordering (replace the B at the end of the code with G if wanting gold). West German Long Case & Regular Clock Movements Go to www.carbatec.com.au to see our full range Numbers are available separately from CLK kits at Order no. Height Roman 542B 9.5mm 546B 12.7mm 550B 16mm 558B 25mm 562B 32mm Order no. Height Arabic 502B 9.5mm 506B 12.7mm 510B 16mm 514B 19mm 518B 25mm 522B 32mm Order no. Minute Hand Length Hour Hand Length Colour A. 1211-B 39mm 25mm Black A. 1211-G 39mm 25mm Gold B. 1194-B 49mm 36mm Black B. 1194-G 49mm 36mm Gold C. 1093-B 35mm 29mm Black C. 1093-G 35mm 29mm Gold C. 1210-B 74mm 64mm Black C. 1210-G 74mm 64mm Gold D. 1075-B 80mm 60mm Black D. 1075-G 80mm 60mm Gold D. 1032-B 111mm 80mm Black D. 1032-G 111mm 80mm Gold E. 1201-B 53mm 37mm Black E. 1201-G 53mm 37mm Gold F. 1206-B 45mm 35mm Black F. 1206-G 45mm 35mm Gold G. 1079-B 87mm 64mm Black G. 1079-G 87mm 64mm Gold G. 1077-B 120mm 101mm Black G. 1077-G 120mm 101mm Gold H. 1065-B 88mm 65mm Black H. 1065-G 88mm 65mm Gold I. 1063-B 77mm 60mm Black I. 1063-G 77mm 60mm Gold J. 1340-B 64mm 45mm Black J. 1340-G 64mm 45mm Gold Order no. Sweep Hand Colour A. A-40B 129mm Black A. A-40G 129mm Gold B. 1171-RU 60mm Red B. 1171-BU 60mm Black B. 1171-GU 60mm Gold C. 1191-RU 71mm Red C. 1191-BU 71mm Black C. 1191-GU 71mm Gold D. 1151-RU 46mm Red D. 1151-BU 46mm Black D. 1151-GU 46mm Gold E. 1285-RU 77mm Red E. 1285-BU 77mm Black E. 1285-GU 77mm Gold F. A-35B 71mm Black F. A-35G 71mm Gold Order no. For dials up to Threaded Shaft Overall Shaft Weight Price CLK-7160 6mm thick 8mm 16mm - $12.00 CLK-7190 10mm thick 11mm 19mm - $12.00 CLK-7260 16mm thick 17mm 25mm - $12.00 CLK-7290 19mm thick 24mm 32mm - $12.00 Hands are available separately from CLK kits at $2.00 per set. $2.00 per set. Hands are available separately from CLK kits at $2.00 per set.
  • 140. Pens, Clocks & Craft 138 For more information & to shop online go to www.carbatec.com.au KEY RING - 5 PACK 35mm internal tube. Perfect for offcuts. Gold plated. 60g. BOTTLE OPENER PARTS Cast in solid brass, this is a functional and easy project for all woodturners. A turned handle is all that is required to finish this useful kitchen utensil. Sold individually. 45g. PEN TRUMPET Solid brass, 24k gold plated. In- side diameter 10mm. 20g. CORKSCREW 3-1/2” long. Nickel plated, top quality. Sold in packs of 5. Weight: 100g. Wooden handle is not included. WALKING STICK HEADS A quality set of brass parts to turn your own 3 section walking stick. Parts include the head, two connectors and rubber tip. Both weigh 260g. PERFUME APPLICATOR After assembly, the tip is soaked into a favourite perfume and can be applied anytime. Pen-1 tubes make an excellent sleeve to take up slack on 1/4” mandrels. 60g. PERFUME ATOMISER KIT Suitable for purse sprays, holds up to 3ml. Made with a qual- ity French mechanism and very easy to assemble. Gold plated. Requires a 1/4” mandrel (MAND- 91/92) and bush set (BUSH-AK). CANDLE CUPS Solid brass. Approximately 25mm drill hole required. Pack of 10. 100g. SHIP’S WHEEL NUTCRACKER Solid brass with fixing bolt. Wood not included. 650g. DELUXE LETTER OPENER PARTS 100mm long blade. Make your own handle to suit 85mm long parts with threaded end cap. Sold individually. LETTER OPENER PARTS 80mm long blade. Handle length can be made to your own speci- fications. Pack of 5. 90g. A. 90° SOLID BRASS BUTT HINGE Comes as a pair. B. BRASS DOUBLE BALL CATCHES Comes as a pair. SOLID BRASS BUTT HINGES WITH SCREWS Comes as a pair. BH01 shown. ADHESIVE-BACKED FELT Made of a strong 10 oz wool/rayon blend, this adhesive-backed felt is suit- able for soft bases or for lining projects. Pieces are 431x610mm. Available indi- vidually in green, dark brown or red. Made in Canada. FLOCKING KITS A flocking kit enables you to quickly and easily apply a felt-like finish to any sur- face. Kit includes 85g of coloured rayon fibres and 220ml of like-coloured ad- hesive, enough to cover ap- prox. 1.4m2. Available in four popular colours. Applicator gun also available. LAZY SUSAN BALL BEARINGS Used to make rotat- ing dinner table cen- tre pieces. Rotates on heavy duty steel balls with just a gentle push. Can also be used for many other applica- tions. A. B. C. D. E. Products shown at finished stage. Products shown at finished stage. A. B. Order no. Price KEY-1 $18.00 Order no. Price BO-7007 $16.00 Order no. Price TR-1 $4.00 Order no. Price IN-122 $19.00 Order no. Desc. Price WS-1 Branch $18.00 WS-2 Eagle $18.00 Order no. Price PA-1 $32.00 Order no. Price AK-1 $12.00 BUSH-AK $15.00 Order no. Price CC-10PCE $14.00 Order no. Price IN-127 $43.00 Order no. Price LO-A2 $15.00 Order no. Price LO-A1 $39.00 Order no. Desc. Price BMH-90-01 1” x 1” $18.00 Order no. Desc. Price BMH-ADBC01 35mm $5.00 BMH-ADBC03 43mm $6.00 Order no. Desc. Price BMH-BH01 3/4”x5/8” $8.00 BMH-BH06 1”x3/4” $7.00 BMH-BH09 1-1/2”x7/8” $11.40 BMH-BH04 2-1/2”x5/8” $13.20 Order no. Description Colour Price 76K04-01 Adhesive Backed Felt Green $17.00 76K04-03 Adhesive Backed Felt Brown $17.00 76K04-05 Adhesive Backed Felt Red $17.00 Order no. Description Price FLOCK-BLUE Flocking kit Blue $29.00 FLOCK-BURGUNDY Flocking kit Burgundy $29.00 FLOCK-GREEN Flocking kit Green $29.00 FLOCK-RED Flocking kit Red $29.00 FLOCK-GUN Applicator gun $20.00 Order no. Description Max.(kg) Price A. L-33 3” Dia. 280 $3.00 B. L-44 4” Dia. 300 $4.00 C. L-66 6” Dia. 680 $5.00 D. L-88 8” Dia. 780 $9.00 L-99 9” Dia. 340 $10.00 E. L-120 12” Dia. 810 $11.00
  • 141. For more information & to shop online go to www.carbatec.com.au 139 CARBA-TEC® 635MM WIDE DRUM SANDER - TWIN DRUM • Features 3hp / 230v single phase motor (must be hard-wired). • Variable speed rubberised feed belt • Spirally wound abrasives • Quick setup • Different grits may be used at the same time. • A 2hp dust collector is required for efficient operation CARBA-TEC 650CFM ROOM AIR FILTER • CTF-1000 1/6hp room air filter features remote control and variable extraction capacities of 450, 550 and 650cfm. • Electrostatically charged filter to facilitate greater attraction of particles. • Filter can be washed or blown out with air. It filters almost 100% of particles 5 microns or larger and around 85% of particles up to 1 micron. CARBA-TEC® 13” SEGMENTED SPIRAL HEAD THICKNESSER An excellent addition to your workshop and does not take up the space that a full-size machine does. Plus you can take it with you if you do jobs away from the shed. The segmented sprial head provides a smooth finish. 2.4hp, 230v, 10A motor. CARBA-TEC® 12” ECONOMY DISC SANDER Cast iron body construction with an alloy table. Unlike most sanders that run at twice the speed this machine makes it almost impossible to burn the wood and greatly prolongs the life of the paper. Mitre gauge included. 1hp, 230v motor, 1440rpm CARBA-TEC® 6”X9” BELT/DISC SANDER WITH STAND Belt can be used vertically or horizontally. Disc table tilts to 45°. Standard equipment includes graphite slip cloth underneath the belt. Also fitted with quick change hook and loop 9” disc. Stand and mitre gauge included. UNIVERSAL MOBILE BASE - 320KG CAPACITY Featuring a 320kg capacity, this base extends from 355mm square or up to 558 x 1370mm in rectangular configuration. Slotted rails adjust to an exact fit on your machine. 9kg. ROCKLER SURE-FOOT™ 36” ALUMINIUM BAR CLAMP Extra wide 2-1/2” foot for exceptional stability. Higher base that raises the bar 1-1/2” above the table for excellent handle clearance. Built-in clamp hook locks onto a 3/4” board eliminating the need to “clamp the clamp” when hanging on a wall. SPIRAL HEAD 8” LONG BED INDUSTRIAL JOINTER • Offering reduced noise cutting, less chatter and tear-out in curly or highly figured wood. • 40 x four-sided cutter knives are made of fine grain tungsten carbide and are held in place by a Torx style screw • Lasts three to five times longer than good quality HSS knives. • The size of the knife and the spiral cutting action reduce the amount of horsepower needed to drive the machine, translating into more effective power transmission on each revolution. MS-25B..........................RRP $2,495.00 SALE $2,195.00 CTF-1000.......................... RRP $419.00 SALE $359.00 CT-330X..............................RRP $729.00 SALE $659.00 DSB-12B............................RRP $199.00 SALE $179.00 SB-609..............................RRP $359.00 SALE $309.00 CMB-700........................... RRP $109.00 SALE $98.00 RK-41815..............................RRP $61.00 SALE $52.00 CTJ-350X................................. RRP $1,899.00 SALE $1,649.00 CTJ-350X................................. RRP $1,899.00 SALE $1,649.00
  • 142. SPECIALS - Instore & Online Specials valid until 1st June 2013140 CARBA-TEC® CANVAS APRON Cross-back shoulder straps.Tan- colored 100% cotton canvas - washable, lightweight yet strong. 860mm long by 710mm wide, providing ample side and front coverage. Includes adjustable shoulder straps. Adjustable waistband with quick-release buckle. Plenty of pockets for easy storage. JET OSCILLATING DRUM SANDER 22-44 • Exclusive SandSmart controlled infinitely • variable feed rate from 0 to 3m/min, giving the ultimate sanded finish • conveyor bed • Drum height and downward pressure is adjustable, eliminating snipe • Oscillating head prolongs the life of your sandpaper JET DUST COLLECTOR DC-1200 VORTEX Benefits behind the Vortex technology: • Minimises filter clogging and • subsequent health concerns from manual cleaning • Eliminates rapid performance drop due to premature filter clogging • Dramatically improves chip separation efficiency of single stage dust collectors. JET 18” BANDSAW • Dual-function quick blade tensioning lever to release the blade tension when not in use and for easy blade changing • Built-in cutting height scale to read the exact depth of cut • Large, cast iron hand wheels make upper blade guide adjustments smooth and easy. • Guides and support bearings adjust independently with micrometer accuracy. • The trunnions are cradled by a heavy-duty zinc alloy saddle, so the table tilts smoothly • Convenient, single tracking adjustment knob that tilts the top wheel in or out. JET VARIABLE SPEED FLOOR MOUNT DRILL PRESS • Precisely machined cast iron table with extension wings • Cross laser for easy operation standard • Down feed handles can be mounted on either side of the drill press • Extension wing provides additional support for longer work pieces • Telescopic fence with work stop and dust collection port 50 mm • Digital speed display for quick reading of speed JET BELT/DISC SANDER WITH STAND • The belt sander plate features a graphite sheet which helps the unit run cooler giving the machine and sanding belt much longer life. • Operate horizontally or vertically or anywhere in between. • The rubber coated drive drum gives it a better grip on the sanding belt for less slippage. • Quick lock dust cover for faster disc changes. CLOTH BACKED SANDING KIT This kit contains four rolls of 25mm x 6 metre sanding lengths with the following grits: 150, 240, 320 and 400. Individual rolls are not available - sold only in kit form. CARBA-TEC® DRILL PRESS TABLE This accessory effectively expands the work area for your drill press allowing you to work with larger projects on small tables. Drill press not included. Mobile Base & Abrasive Pack Incl. 170 Piece Drill Bit Set Incl. Mobile Base Incl. 20 Plastic Collection Bags Incl. Mobile Base & Abrasive Pack Incl. JET-2244OSC-PK..RRP $2,660.00 SALE $2,499.00 JET-DC1200VX-PK...RRP $649.00 SALE $599.00 JET-JWBS18Q-PK.........RRP $2,082.00 SALE $1,999.00 JET-JDP2800VS-PK...RRP $1,432.00 SALE $1,349.00 67K10-06................. RRP $51.00 SALE $43.00 DPT-1.RRP $105.00 SALE $95.00 JET-JSG96OS-PK..RRP $806.00 SALE $699.00 SPS95-01.............. RRP $24.00 SALE $19.00
  • 143. For more information & to shop online go to www.carbatec.com.au SPECIALS - Instore & Online 141 Changing the way things are done VERITAS® SUPER HARD SCRAPER SET Most scrapers are sheared from spring steel, hardened to Rc38-42. These scrapers are harder - Rc48-52 - and hold an edge longer. They are also fully milled to a square, sharp 90° ready for immediate use on fine work. Two are 2” x 6”, two are 2-3/8” x 6”. VERITAS® CABINET SCRAPER Used to clean a dirty workbench top, remove dried glue, smooth a panel or a tabletop with a difficult grain and leaves behind a surface free of tear-out, digs or gouges. Improvements over the traditional #80 cabinet scraper include a 2-3/4” (70mm) width blade, with both edges ground at 45° so that the tool may have two cutting edges prepared at once. VERITAS® BEVEL GAUGE Features seven individual slots to measure the most commonly used angles from 15° to 45° in 5° increments. 19mm deep slots for good registration. The pocket-sized disc is 63.5mm in diameter and has a center hole for hanging it on a nail. Made of solid brass that will not damage a honed edge. Made in USA. ARCHER™ LEATHER CHISEL ROLL - 12 PLACE A quality leather roll that protects and stores our chisels for later use. Suits carpenters and carvers chisels. Weight: 520g. DIGITAL ANGLE FINDER Why bother measuring and estimating angles with a handgauge when you can use this digital tool to provide quick, precise angle readings on your tablesaw. PAINTER’S PYRAMIDS These simple supports are quick to set up, non-marking, and compact to store. Moulded from a solvent-resistant polymer, they will not react with finishes or wood. Each support is 50mm high and has a load rating of 90kg. ROCKLER SILICONE GLUE BRUSH This brush features silicone bristles that are easy to wash with water, and quickly shed dried glue for longlasting service. ROUTER MAT Stops those tricky jobs from running away from you. Sand, carve, plane or rout on this slip resistant mat. Also suitable for a multitude of domestic uses. Measures 610 x 910mm. TEKNATOOL® SHARPENING SYSTEM • Transforms your standard bench grinder into a precision grinding and sharpening machine, without the cost. • Combines the slideway grinding jig and the powerful finger grind jig (solid separately) into one versatile sharpening tool. • Utilises a sturdy platform and a unique sliding base to achieve the ultimate in sharpening. • Slideway is also used to precision dress the grinding wheel essential for perfect grinding results. TEKNATOOL® FINGERNAIL JIG The NOVA Finger Jig Unit uses an extruded aluminium base with quick cam lock release via a comfortable rubber handle. The same finger jig as on the Nova Sharpening Centre is used, with the same tru-track ball, lightweight but strong design. POLYPROPYLENE SHIMS Accurately made in a range of thicknesses, these polypropylene shims can be used individually or stacked in combinations for a precise fit, saving time and eliminating guesswork when spacing, plumbing or levelling. Assortment includes 1/32”, 1/16”, 1/8” and 1/4” thick shims (10 of each). 05K30-10............................. RRP $23.00 SALE $19.00 05P32-05............................ RRP $88.00 SALE $79.00 50K09-01............................. RRP $13.00 SALE $10.00 AR-12.................................. RRP $37.00 SALE $29.00 AFB-15................................ RRP $59.00 SALE $49.00 88K58-70............................... RRP $9.00 SALE $7.00 RK-45624...............................RRP $8.00 SALE $6.00 P-2436................................. RRP $11.00 SALE $9.00 TK-35018........................... RRP $179.00 SALE $159.00 27K07-45..............................RRP $10.00 SALE $9.00 TK-35053........................... RRP $129.00 SALE $115.00
  • 144. SPECIALS - Instore & Online Specials valid until 1st June 2013142 CREUSEN POWERLINE™ 8” HIGH SPEED DOUBLE GRINDER This sturdy bench grinder is suited for heavi- er work and fitted with a very powerful 600W motor and 200mm diameter by 25mm wide stones. CREUSEN POWERLINE™ 6” HIGH SPEED DOUBLE GRINDER This is the most popular Creusen grinder and great for just about any workshop activ- ity. On one side is a generous 40mm wide aluminium oxide stone and on the other a 20mm coarse grey aluminium oxide stone for general grinding. CARBA-TEC® HEIGHT ADJUSTABLE WORKBENCH Heavy duty laminated solid oak workbench features a solid 25mm thick work top, double thick front, back and sides, and heavy duty height adjustable steel legs. Supplied with both a front and end vice, four bench dogs and a solid wood stopper bar, this versatile and sturdy unit would be a great asset in any classroom or home workshop. This great bench suits all woodworkers...short and tall. Adjustable height: 812.8mm - 990.6mm TITEBOND III ULTI- MATE WOOD GLUE The first single-part, water-cleanup wood glue ever offered that is proven waterproof. • Superior bond strength, longer open assembly time and lower application temperature. • Non-toxic, solvent-free and cleans up with water • Idealforinteriorandexteriorapplications. CMT FLEXIBLE TEMPLATE FOR CURVED & ARCHED ROUTING Easy to screw on any kind of wooden panels, MDF or chipboard for creating forms, arcs and curved elements easily and rapidly. Made of a highly-resistant flexible plastic, can be tied in knots without any risk of ruining or reducing flexibility. ROCKLER MAGNETIC JOINTER JIG Magnetic bars hold jointer knives in place flush with the outfeed table on any 6” to 8” jointer bed. Allows quick shifting of knives to avoid damage and extend blade life. Solid steel construction. KREG® KLAMP VISE This vise is smaller and simpler to use than the common vice and can be connected to almost any workbench providing over 158kg of clamping power. Vertical clamping, sideways clamping, vise-style clamping, routing, sanding, sawing, and a whole lot more. PFEIL CABINET MAKERS CHISELS Blades are forged from K510 steel, hardened to 60 Rc. Handles made of strong, oiled elm wood from Switzerland. Set includes six carpenters chisels in a rugged canvas roll. Widths included: 6, 10, 12, 16, 20 and 26mm. MOISTURE METER WITH LCD DISPLAY This meter works using the electrical resist- ance principle and is ideal for comparative moisture readings on common timber spe- cies and building materials. Range of 6 to 44% to an accuracy of 2% in timber. Building materials such as wall board, drywall, plaster, mortar and concrete can also be measured to 0.05% from 0.20% to 2.0%. 127mm long. 130g. PROFESSIONAL FACE SHIELD • Provides excellent protection • Developed for comfortable and easily adjusted shield angle. • Contoured frame for chin and forehead protection. • Cushioned headband with a washable brow pad. • Rear-knob double-ratcheting system. • Tough polycarbonate shield has a scratch-resistant anti-static and anti-fog coating. Measures about 9-1/2” wide by 13” tall and weighs 12 oz. Made in the USA. CG-DS7200T..................... RRP $249.00 SALE $225.00 CG-DS7150TS................... RRP $209.00 SALE $179.00 WB-6030 .............................................RRP $799.00 SALE $679.00  TBD-3-946ML .....................RRP $18.00 SALE $15.00 CMT1200 .............................RRP $92.00 SALE $79.00 RK-34099 .............................RRP $49.00 SALE $44.00 KR-KKS1060....................... RRP $85.00 SALE $72.00 PF-CM-SET-6......................RRP $235.00 SALE $209.00 CT-EM4807.......................... RRP $69.00 SALE $59.00 22R72-60............................. RRP $62.00 SALE $55.00
  • 145. For more information & to shop online go to www.carbatec.com.au SPECIALS - Instore & Online 143 CHINESE SCISSORS This style of scissors has been made for over 300 years in China. Razor sharp, blade strength and sharpness make them useful in the shop, garden or kitchen, or for crafts. Overall lengths are 140 to 216mm. ROCKLER DELUXE RATCHETING BAND CLAMP Stitched band eliminates fraying and is crimped to the clamp so it won’t come loose when you’re clamping tight. Permanently attached wrench will always be ready for use. Rugged 1”Wx10’L (25.4mmx3m) nylon band is rated for loads up to 453kg. Selflocking cam guarantees a positive hold and instant release. Cauls shown are sold separately. 170 PIECE DRILL BIT CASSETTE - TIN DRILLS Titanium Nitride (TiN) is a very hard coating that helps prolong the cutting edge of these drill bits. Includes the following sizes: 1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 6.5mm, 7.0mm, 7.5mm, 8.0mm, 8.5mm, 9.0mm, 9.5 and 10.0mm. Weight: 4.1kg. KUNZ SPOKESHAVES Cast iron spokeshaves made in Germany. HARDWARE FITTING KITS Buy in bulk and save! Get all the components you need in this master kit of jig and fixture fit- tings. Each kit contains: 20 x 1” T-Bolts, 10 x 2-1/2” T-Bolts, 20 x 1-1/2” T-Bolts, 10 x 3-1/2” T-Bolts, 16 x T-Nuts, 10 x 1” Round Insert Knobs, 6 x 2” T-Insert Knobs, 6 x Four Wing Bolt Knobs, 4 x Five Wing Bolt Knobs, 6 x Four Wing Insert Knobs, 4 x Five Wing Insert Knobs, 16 x Threaded Inserts, 20 x Washers. Kit comes in a tough polypropylene case that has 50mm deep compartments with moveable dividers. Bought separately, the components in this kit would add up to more than $200, so it’s a great way to get your collection started and then supplement it as required. Available in 1/4” and 5/16” thread configurations. CARBA-TEC® DUST DEPUTY • Injection molded from translucent, static dis- sipating plastic. • Added to your exist- ing shop vacuum, it uses centrifugal force to literally spin the material being expelled right out of the airstream and into the bucket. • 99% of the material NEVER reaches your shop vacuum! • Tapered inlet and outlet accomodates different sized hoses and couplings Made in USA. PFEIL CHISELS AND DVD STARTER KIT You’ll have everything you need to get start- ed as a carver, and you save over 10% off the full retail value of items included in this kit! Kit includes: DVD, PF-15-10, PF-2-14, PF-5-12, PF-5-20, PF-9-4, PF-8-7 and PF-12-10. HEADBAND LOUPE WITH INTER- CHANGEABLE LENSES • Designed for close work, It allows you to keep both hands free at all times. • Fitted with three powerful LED lamps (requiring 3 x AAA batteries - not included). Includes interchangeable lenses with magnification factors of 1.0, 1.5, 2.0 and 2.5. • Lens assembly pivots upward when not required. • Can be used with or without spectacles. • Front of the headband is padded for user comfort. Unit weight is 195g, shipping weight is 560g. CERAMIC SALT/PEPPER MECHANISM Ceramic Mills can grind Coarse Salt, Sea Salt, Peppercorns, Flax Seeds, Mustard Seeds, Cumin, Sesame Seeds and Celery Seeds, without transferring taste on the mill. They are rustproof, with stainless steel components and an aluminium rod, and are available in a variety of popular sizes. Full instructions are provided. Note: Image shows finished product. 45K10-10............................. RRP $16.00 SALE $14.00 RK-41419 .............................RRP $20.00 SALE $17.00 BDK-170T.............................RRP $88.00 SALE $65.00 KU-50 Convex....................... RRP $44.00 SALE $35.00 KU-55 Concave.................... RRP $44.00 SALE $35.00 KU-63 Curved....................... RRP $27.00 SALE $22.00 KU-51A Flat Face.................. RRP $35.00 SALE $29.00 KU-4PK Buy All 4.....SALE $109.00 00H21-49 1/4” Thread............RRP $69.00 SALE $49.00 00H31-49 5/16” Thread..........RRP $69.00 SALE $49.00 DDAUS.............................. RRP $195.00 SALE $169.00 PF-BE6SET........................ RRP $259.00 SALE $229.00 LP-1525................................RRP $55.00 SALE $45.00 GRIND-7 7”........................... RRP $9.00 SALE $7.00 GRIND-10 10”........................ RRP $9.00 SALE $7.00 GRIND-12 12”........................ RRP $9.00 SALE $7.00 GRIND-17 17”........................ RRP $9.00 SALE $7.00
  • 146. SPECIALS - Instore & Online Specials valid until 1st June 2013144 CMT FORMULA 2050 Most blade and bit cleaning products work with a dissolving action, using some powerful chemicals to dissolve wood residues and adhesives. Safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces. The resin releases its grip and you simply wipe it off. • Completely non-toxic, non-flammable and certified biodegradable. Formula 2050 is a safe, earth-friendly product; • Do not rinse after cleaning. Formula 2050 provides protection from rust and corrosion. Keeps your table saw top rust resistant too. CMT KITCHEN JIG • Designed for joining kitchen bench tops at 90°. Made from stable phenolic resin. Makes rounding over or chamfering edges quick and easy. Also has facility for routing panel bolt recesses so that hardware can be fitted in minutes. KREG® PRECISION MITRE GAUGE SYSTEM • Suits machines with standard 3/4” (19mm) mitre track slots. • Easy to read Vernier scale allows precise angle adjustments to within 1/10th of a degree. • Five patented bar adjusters take up the play in standard 3/4” table slots for a perfect fit. • 24” Heavy Duty Trak section with patented Flipstop and self-adhesive measuring tape. • Positive stops at 1, 10, 22.5, 30 and 45 degrees. • Made in the USA. Quality German Made Power Tools BONUS DRILL BIT SET ROBERT SORBY® TURNMASTER SET First in the world to combine three cutting edge technologies in one flexible tool. Cutters are available in tungsten carbide, titanium nitride (TiN) and high speed steel (HSS) providing unsurpassed range to woodturners at every level. The standard offering includes a complete tool holder with handle (525mm total length) and 3 HSS re-sharpenable cutters. Additional cutters and cutter sets make it the most versatile single tool concept. TurnMaster incorporates a patented interchangeable cutter head that locks into three positions allowing for simple scraping and shear scraping options. Benefits: • All cutters interchangeable with one tool • Indexable, patented cutting head for shear scraping • Interchangeable cutter head – no need to buy whole new tool • Flat underside for stability • High tensile torx screw/ key for quick cutter release CORDLESS DRILL CXS SET • Impressive ergonomics and light weight (0.9 kg) for comfortable drilling and screwdriving. • 12-stage torque setting and switch-off for precise screwdriving. • Angle attachment for accessing tight angles and hard to reach areas. • Extensive range of uses and applications. INCLUDES BONUS ABRASIVE SYSTAINER + 200 ABRASIVE SHEETS ETS 150 RANDOM ORBITAL SANDER • 3mm sanding stroke for an excellent surface finish • 5mm sanding stroke for efficient material removal. • Dual bearing for a long service life • Weighs only 1.8 kg for particularly effortless work. • Sanding pad brake for safe, faultless work - no rework. • Constant speed even under load. • Pair with dust extraction for cooler surface temperature, longer lasting pads and abrasives, less pigtails and a better finish. • 37-piece tool and accessories set. • Ratchet and CENTROTEC handle plus various adapters and extensions. • Complete range of CENTROTEC tools can be used with the CENTROTEC tool chuck. • Components are compatible with all Festool cordless drills as well as the ratchet and handle. • 19 different bit inserts and 2 bit extensions • ¼” socket set from 4 to 13 mm • LIMITED OFFER - NO BACK ORDERS CENTROTEC RATCHET SET NEW NEW CMT650.................................RRP $235.00 SALE $199.00 CMT650-BUSH..........................RRP $9.00 SALE $7.00 652-621-11Router Bit................RRP $83.00 SALE $75.00 KR-KMS7102.................RRP $205.00 SALE $185.00CMT2050.......................NEW $16.00 RSB-HCT123 Turnmaster.........NEW $129.00 RSB-CTSET Repl Carbide Set... NEW $45.00 RSB-HSSET Repl HSS Set........ NEW $33.00 FE-571789-PK 3mm Stroke Package Value RRP $868.00 SALE $560.00 FE-564271-PK .....Pkg Value RRP $414.00 SALE $349.00 FE-571797-PK 5mm Stroke Package Value RRP $868.00 SALE $560.00 FE-497881............................. RRP $189.00 SALE $99.00
  • 147. SPECIALS For more information & to shop online go to www.carbatec.com.au NEW PRODUCTS 16 PIECE FORSTNER BIT SET (METRIC) This 16 piece set of forstner style bits comes in a blow moulded case and contains 6, 10, 13, 16, 19, 22, 25, 28, 32, 35, 38, 41, 44, 48, 51, and 54mm forstner style bits. 2.56kg. CARBA-TEC® METAL DETECTOR The sensor head has a diameter of 135mmand will detect most metal objects that will be a danger to your planer or thicknesser blades. Overall length is 395mm. ROCKLER 1.2M UNIVERSAL T-TRACK KIT Outfit your workbenches, jigs, or machine tables with the ultimate accessory track! Universal TTrack boasts a unique stacked slot design that allows you to attach any accessory with 1/4” T-bolts, 5/16” T-bolts, or 1/4” Hex-bolts. Overall length is 395mm. DUST RIGHT 4” QUICK RELEASE STARTER KIT Dust Right™ 4’’ Quick Release Starter Kit Move dust collection from one tool to the next like never before! One end of the 4’’ Dust Right™ Tool Port connects tightly to any tool with a 4’’ dust port, while the other end fits perfectly into the Dust Right™ Handle. Kit Includes: • Two 4” Dust RightTM Tool Ports with Two Metal Hose Clamps. • Dust RightTM Handle 2-1/2” HOLD TITE HOSE KIT Includes: 2-1/2” Hose, extends 260 x 1000mm, 2 x couplers, tapered, wide nozzle. WIRE BENDER Anyone who has tried to shape wire with pliers will appreciate the usefulness of this jig. With the wire bending jig held in a vise (or mounted), you can bend mild steel wire up to 3/16” or 5mm diameter to any shape. Perfect for making custom tool holders or pegboard hooks from coat-hanger wire. Made in Japan. DRILL GRINDING GUIDE This bench-mounted drill grinding guide is used with an electric bench grinder. Twist drills ( 1/8” to 3/4” dia.) can be sharpened on the side of the grinding stone. It will grind all angles, providing edge relief as it grinds on an arc. Complete instructions are included. SWIVEL HEAD NAIL PULLER Features adjustable foot, lockable at 5 angles (80°, 105°, 130°, 155° and 180°). The swivel head is easily adjusted by way of a springloaded thumb lever. An excellent addition to any toolbox. Specifications: 400mm long, 700g, rated to 150kg. Solid steel construction with poly- propylene handle. CARBA-TEC® HANDSCREW CLAMPS Classic cabinetmakers’ bench clamps with wooden jaws that won’t mark your work or slip. NEW NEW FSB-16PCE-M......................... RRP $57.00 SALE $48.00 MMD-80A.......................RRP $59.00 SALE $49.00 RK-24063.....................RRP $47.00 SALE $39.00 RK-42354............................... RRP $41.00 SALE $35.00 HTH-970..................................RRP $16.00 SALE $14.00 92W67-01...........................NEW $12.00 93K70-01 ............................. NEW $25.00 NP-55011..................................RRP $28.00 SALE $25.00 HSC-4 4” Clamp................RRP $11.00 SALE $9.00 HSC-6 6” Clamp................RRP $15.00 SALE $12.00 HSC-8 8” Clamp................RRP $19.00 SALE $16.00 HSC-10 10” Clamp............RRP $20.00 SALE $17.00
  • 148. The perfect solution. Purchase instore or online. Thinking of a gift? View our large range of product & ‘how to’ videos at www.youtube.com/CarbaTecToolsForWood WALKSTOOLS There are thousands of reasons for owning a stool that is portable. What makes this stool unique is the telescoping legs that allow for two seating positions. With the legs extended, the stool has a regular three-legged stance. With the legs retracted, the base has a single broad foot that allows pivoting while crouched, reducing pressure on one’s back and knees. The Basic (50cm) version caters for those on a budget whilst the Comfort (65cm) offers more robust construction and is made in Sweden. Prices do not include shipping and handling charges. Content Team: Editor-Carol Russell, Graphic Designer-Holly Shires, Rachel O’Dell, Photographer-Donovan Knowles 9 333827 218954 Shop online at www.carbatec.com.au Order toll free within QLD/NSW/VIC/SA/NT 1800 658 111 BRISBANE 128 Ingleston Road, Wakerley, Qld, 4154 t: 07 3390 5888 f: 07 3890 5280 orders@carbatec.com.au Hours: Mon-Fri: 8am-5pm, Sat: 8am-12pm SYDNEY 113 Station Road, Auburn, NSW, 2144 t: 02 9648 6446 f: 02 9648 6443 sydney@carbatec.com.au Hours: Mon-Fri: 8.30am-5pm, Sat: 8am-12pm MELBOURNE 80 - 82 Osborne Avenue Springvale, Vic, 3171 t: 03 8549 9999 f: 03 8549 9998 melbourne@carbatec.com.au Hours: Mon-Fri: 8.30am-5pm, Sat: 9am-1pm ADELAIDE 27 Magill Road, Stepney, SA, 5069 t: 08 8362 9111 f: 08 8363 0271 adelaide@carbatec.com.au Hours: Mon-Fri: 8.30am-5pm, Sat: 8am-12pm PERTH CARBA-TEC (WA) ACN 144 521 855 151 Balcatta Road, Balcatta, WA, 6021 t: 08 6143 5788 f: 08 6143 5789 sales@carbatecwa.com.au Hours: Mon-Fri: 8.30am-5pm, Sat: 8am-1pm Pricing in WA may vary due to freight considerations. Order toll free within WA 1300 735 905 LAUNCESTON CARBA-TEC (TAS) Pty. Ltd. ACN 122 150 029 242 Hobart Road, Kings Meadows, TAS, 7249 t: 03 6344 9899 f: 03 6343 1845 launceston@carbatec.com.au Hours: Mon-Fri: 8am-5pm, Sat: 9am-1pm Order by phone 03 6344 9899 NEW ZEALAND Visit: 110 Harris Road, East Tamaki, Auckland Post to: PO Box 259 126 Botany, Manukau, 2163 t: 09 274 9454 f: 09 274 9455 orders@carbatec.co.nz Hours: Mon-Fri: 8.30am-5pm, Sat: 9am-12pm Some items may be unavailable or different specifications to that shown. www.carbatec.co.nz Order toll free within New Zealand 0800 444 329 TEKNATOOL CHUCK PACK Don’t miss out on this special buy on a TEKNATOOL chuck and jaw package. This added value isn’t available very often so get in on this chance to save! The package includes the SuperNova SN2 chuck, insert of your choice, mini spigot jaws and 100mm jaws. There are a limited number of these packs available so don’t miss out on this superb value. NO BACKORDERS. TEKNATOOL JAW PACK If you already own a TEKNATOOL chuck this offer is for you! Add a set of Cole Jaws to your turning kit and get the added value of a jaw buffer kit included in the special price. This is a limited offer so don’t miss out. NO BACKORDERS. WS-BASIC50 Walkstool 50cm.............................................. RRP $59.00 SALE $45.00 WS-COMFORT65 Walkstool 65cm.......................................RRP $99.00 SALE $85.00 TK-CHKPK.............. RRP $327.00 SALE $239.00 TK-JWPK................RRP $114.00 SALE $85.00

×