Batjump.Pcfm

327 views

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
327
On SlideShare
0
From Embeds
0
Number of Embeds
35
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Batjump.Pcfm

  1. 1. LADIES & GENTLEMEN START YOUR ENGINES!!! (PROPER JUMP STARTING PROCEDURES)
  2. 2. VEHICLE BATTERIES COME IN MANY SHAPES AND SIZES…. WHAT THEY TYPICALLY HAVE IN COMMON IS A POSTIVE (+) AND NEGATIVE (-) TERMINAL. NOTE THE POSTIVE (+) ICON NEXT TO THE TERMINAL ON THE BATTERY
  3. 4. JUMPER CABLES COME IN DIFFERENT CONFIGURATIONS AND CABLE WEIGHT. A LARGER CABLE DIAMETER REDUCES RESISTANCE …HENCE… LESS HEATING OF THE COATED JUMPER CABLE WIRE
  4. 7. STEP ONE: CONNECT ONE OF THE JUMPER CABLE CLAMPS (POSTIVE/RED/ORANGE) TO THE “DEAD” BATTERY’S POSITIVE (+) POST
  5. 9. STEP TWO: CONNECT THE REMAINING CLAMP OF THE SAME CABLE (POSTIVE/RED/ORANGE) TO THE “ LIVE ” BATTERY’S POSITIVE (+) POST
  6. 11. STEP THREE: CONNECT THE CLAMP OF THE REMAINING JUMPER CABLE (NEGATIVE/BLACK/GRAY) TO THE “LIVE” BATTERY’S NEGATIVE (-) POST
  7. 13. STEP FOUR: CONNECT THE OTHER END CLAMP OF THE SAME CABLE (NEGATIVE/BLACK/GRAY) TO A CLEAN METAL PART OF THE DISABLED VEHICLE
  8. 14. WARNING NEVER CONNECT TO THE NEGATIVE (-) BATTERY TERMINAL OF THE DISABLED VEHICLE
  9. 16. STEP FIVE: ATTEMPT TO START THE DISABLED VEHICLE FROM THE “LIVE” BATTERY ONLY . THE LIVE VEHICLE SHOULD NOT BE RUNNING.
  10. 17. STEP SIX: WHEN THE DISABLED VEHICLE STARTS, REMOVE THE CABLES IN THE REVERSE ORDER THEY WERE PLACED INTO POSTION.

×