Assignment #2Registration No. 1395/FET/BSEE/F10Name : Shehbaz AliSubmission date : 13-10-2011Teacher : Adeel JadoonSection...
Click file menu, choose file item or use the icon from theupper tool bar.Choose sketcher from the right tool bar.Select th...
of dimension from upper toolbar, select the axis aroundwhich you want to draw the same rib, set the angle andnumber of rib...
Upcoming SlideShare
Loading in...5
×

Use of rib tool in pro e

1,655

Published on

It will help to understand the use of rib tool.

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
1,655
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
3
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Use of rib tool in pro e

  1. 1. Assignment #2Registration No. 1395/FET/BSEE/F10Name : Shehbaz AliSubmission date : 13-10-2011Teacher : Adeel JadoonSection : “ D”
  2. 2. Click file menu, choose file item or use the icon from theupper tool bar.Choose sketcher from the right tool bar.Select the front plane, reference plane is right andorientation plane is right plane.Choose the circular tool.Bring your cursor to the sketch plane, press left buttonat the origin and draw a circle of diameter 300px.Select done from the right toolbar.Now make this 2-D sketch into 3-D, click extrude tooland set the depth of circle or thickness of circle(e .g 50px), then select done to get the shape.Select extrude tool, click on placement from the uppertoolbar ,define plane on which you want to draw anothersketch, select surface of circle as your plane.Select the circular tool, again draw a circle of lessdiameter than the first (e .g 200px).Click done to get the 3-D shape, now set the depth ofthis circle or thickness of circle.Select the rib tool from the right toolbar, press thereference from upper toolbar ,select the referencewhere you want to make the sketch for rib, now selectthe edge reference ,between these references you willdraw the sketch.Draw sketch (draw line from upper disc to lower disc),click done, set the thickness (e .g 5px).Select the pattern by click right click from your mousebutton on the rib tool in the tree, select the axis instead
  3. 3. of dimension from upper toolbar, select the axis aroundwhich you want to draw the same rib, set the angle andnumber of rib, click done, you will see the number of ribaround that axis.

×