Eligibility Criteria for Passive OEM:. OEM should be in Interconnection business with converge solution offering withvarious Connectivity platforms like Structure cabling, Telecom Network, GPONnetwork etc.. OEM should have been market leader at least once in Indian Structured CablingMarket. (Supporting Media Reports required).. OEM should have at least 30% market share in SCS Market.. OEM should have presence Indian market with manufacturing and productDevelopment center in India.. OEM should have technology development program partnership with any one ofthe top 3 Active networking (Switches and Routers) OEM’s globally.(Referencerequired). OEM should have at least One RCDD certified person sitting in India. All material should be from one OEM make only.. OEM should have an experience in supply and execution of at least 3 similartype of Network in India. (Customer Certificate required alteast for one project).. OEM should have done 1 Institution Campus Network on same type oftechnology and products. ( Reference Required). OEM should have at least 4 training centers in India
FOR TECHNICAL BID AND COMPLIANCE STATEMENT FOR UTP CABLING SYSTEM UTP CABLING SYSTEM Sr Compliance No. Details Specification Deviation 1 Type Unshielded twisted pair cabling system, Certificate by Yes / No Intertek (ETL) for the 4-Connectors channel testing to the Cat 6 Cabling system as per the ANSI/TIA 568 C.2 & as well as the ISO 11801 standards up to 600 MHz. 2 Networks 10 / 100/1000 Ethernet, 155 Mbps ATM, 1000 Mbps Yes / No Supported IEEE 802.3ab Ethernet, and proposed Cat 6 Gigabit Ethernet 3 TIA / EIA 568 C.2 ETL Verified / UL Listed Yes / No 4 Warranty 25 year systems warranty; Warranty to cover Yes / No Bandwidth of the specified and installed cabling system, and the installation costs 5 Performance Yes / No characteristics to (a) Attenuation, Pair-to-pair and PS NEXT, ELFEXT be provided along and PSELFEXT, Return Loss, ACR and PS ACR for 4- with bid connector channel (b) Should perform to CAT6 with short channel Yes / No (c) 4-Connectors channel testing to the Cat 6 Cabling Yes / No system as per the ANSI/TIA 568 C.2 & as well as the ISO 11801 standards up to 600 MHz. (d)Should have a PSNEXT margin of 7.5 dB over Yes / No CAT6 (e) CAT6 cabling system should be tested and verified by the Independent third party laboratories for Zero BER (Bit Error Rate) testing at the data transmission speed of 1 Gbit/s.
UTP CABLESr ComplianceNo. Details Specification Deviation Type Unshielded Twisted Pair, Category 6, TIA / EIA 568- Yes / No1 C.2 & ISO/IEC 118012 Conductors 23 AWG solid bare copper Yes / No3 Insulation Polyethylene Yes / No4 Jacket Flame Retardant PVC Yes / No Pair Separator Cross-member (+) fluted Spline.5 Approvals (a) UL Listed / UL Verified Yes / No (b) ETL verified to TIA / EIA Cat 6 Yes / No Operating Yes / No6 temperature -20 Deg. C to +60 Deg. C Storage Temperature -20 Deg. C to +80 Deg. C Frequency tested Yes / No7 up to Minimum 600 MHz8 Packing Box of 305 meters Yes / No Cable Outer Yes / No9 Diameter .23 inches Delay Skew 45ns MAX. Yes / No1011 Bend Radius 4 * Cable Diameter Yes / No12 Impedance 100 Ohms + / - 15 ohms, 1 to 600 MHz. Yes / No UL/NEC Ratings CMR Rated Yes / No13 Mutual 5.6 NF MAX /100 Mtr. Yes / No14 Capacitance Conductor 66.58 Ohms Max / KM Yes / No15 Resistance Propagation Delay 536 ns/100 Mtrs. MAX @ 250 Mhz Yes / No16 Performance Yes / No characteristics to be provided along Attenuation, Pair-to-pair and PS NEXT, ELFEXT and17 with bid PSELFEXT, Return Loss, ACR and PS ACR Yes / No18 ROHS Compliant ROHS/ELV Compliant
UTP JACKSSr ComplianceNo. Details Specification Deviation 1 Type PCB based, Unshielded Twisted Pair, Category 6, Yes / No TIA /EIA 568-C.2 and ISO/IEC 118012 Modular Jack 750 mating cycles Yes / No3 Wire terminal 200 termination cycles Yes / No4 Integrated bend-limiting strain-relief unit for cable entry Accessories Integrated hinged dust cover Yes / No Support cable pair termination process on the jacks at Yes / No 90 degree angle. Bidder should have a mechanism to maintain the Yes / No quality of the termination ir-respective of the skill level of the termination staff.5 Housing Polyphenylene oxide, 94V-0 rated. Yes / No6 110 Blocks polycarbonate, 94V-0 rated Yes / No7 Jack contacts Beryllium copper, plated with 1.27 mm [.000050] thick Yes / No gold in localized area and 3.81 mm [.000150] minimum thick tin-lead in solder area over 1.27 mm [.000050] minimum thick nickel under plate8 Wiring blocks Polycarbonate, 94V-0 rated Yes / No9 Approvals (a) UL Listed / CSA Approved Yes / No (b) ETL verified to TIA / EIA Cat 6 Yes / No10 Performance Attenuation, NEXT, PS NEXT, FEXT and Return Loss Yes / No Characteristics to be provided with bid11 Yes / No ROHS Compliant ROHS/ELV Compliant
UTP JACK PANELS 24 PORTSr ComplianceNo. Details Specification Deviation Type 24-port, Modular, PCB based, Unshielded Twisted Yes / No Pair, Category 6, TIA / EIA 568-C.2 and ISO/IEC1 118012 Ports 24 Yes / No Port arrangement Configured as 6 Port Module with individually3 replaceable CAT-6 Jacks Circuit Front of each module shall be capable of accepting 9 Yes / No4 Identification mm to 12 mm labels Port Identification 9mm or 12mm Labels on each of 24-ports (to be Yes / No5 included in supply6 Modular Jack 750 mating cycles7 Wire terminal 200 termination cycles Yes / No8 Accessories Integrated bend-limiting strain-relief unit for cable entry Yes / No Yes / No9 Materials Housing Polyphenylene oxide, 94V-0 rated Yes / No Wiring blocks Polycarbonate, 94V-0 rated Yes / No Jack contacts Beryllium copper, plated with 1.27 mm [.000050] thick Yes / No gold in localized area and 3.81 mm [.000150] minimum thick tin-lead in solder area over 1.27 mm [.000050] minimum thick nickel under plate Panel Black, powder coated steel Yes / No10 Approvals UL listed / ETL Verified Yes / No Termination Yes / No11 Pattern TIA / EIA 568 A and B; Yes / No12 ROHS Compliant ROHS/ELV Compliant UTP JACK PANELS 48 PORT
Type 1U Patch panelPorts 48 Should be available in both Angled & straightPort arrangement 4 Modules of 12-ports each, with individually replaceable RJ-45 Jacks with Strain relief and bend-limiting boot for cableCategory Category 6 exceeding TIA / EIA 568-C.2 & ISO/IEC 11801 exceeding component performanceWiring Compatible either T568A or T568BPort Identification Capable of accepting an icon to indicate its functionTermination All four pairs of a four pair cable to be terminated at one timetechniqueHeight 1 U (1.75 inches)ElectricalCharacteristicsModular Jack 750 mating cyclesWire terminal 200 termination cyclesPull Force 89NVoltage 150VAC maxOperating Temp -40 to 70 deg CMaterialsModular Jack Polyphenylene oxide, 94V-0 ratedHousingIDC Connecting Polycarbonate, 94V-0 ratedBlockPanel Black powder coated steelContacts Beryllium copper, plated with 1.27um thick gold in localized area & 3.8 um minimum thick matte tin in solder area over 1.27 um minimum thick nickel underplateInsulation Phosphorous bronze, plated with 3.81 um minimum thick matte tin overDisplacement 1.27 um minimum thick nickel underplatecontactWarranty 25 YearsROHS ROHS ComplianceApprovals UL ListedPerformance Insertion Loss, Return Loss, NEXT & FEXTCharacteristics tobe provided withbidInsertion Loss At 100 MHz – Max 0.06 dB & at 250 MHz – Max 0.10dBReturn Loss At 100 MHz – Min 33.2 dB & at 250 MHz – Min 17.4 dBNEXT At 100 MHz – Min 57.7 dB & at 250 MHz – Min 47.9 dBFEXT At 100 MHz – Min 48.7 dB & at 250 MHz – Min 40.1 dB
WORKSTATION / EQUIPMENT PATCH CORDSSr ComplianceNo. Details Specification Deviation 1 Type Unshielded Twisted Pair, Category 6, TIA / EIA 568- Yes / No C.2 & ISO/IEC 118012 Conductor 24 AWG 7 / 32, stranded copper conductors 100 Ohm Yes / No3 Length 4 feet, 7 feet, 10 feet Yes / No4 Plug Protection Yes / No Transparent Slim boot5 Warranty 25-year component Yes / No6 Insulation Flame Retardant Polyethylene Yes / No7 Yes / No ROHS Compliant ROHS/ELV Compliant FACE PLATESr ComplianceNo. Details Specification Deviation 1 Type Single Gang Yes / No 2 Material ABS / UL 94 V-0 Yes / No 3 No. of ports One/Two Yes / No Yes / No4 ROHS Compliant ROHS/ELV Compliant
TECHNICAL SPECIFICATION FOR FIBER COMPONENTS6 Core Single Mode Outdoor Fiber
SrNo. Specifications Requirement Compliance Deviation 1 6 - core Single Mode, Armoured, Loose-tube, Gel Yes / No Cable Type filled2 Fibre Type Single Mode, 9/125 micron primary coated buffers Yes / No3 No. of cores 6 Yes / No4 Armour Corrugated Steel Tape Armour Yes / No5 Cable Construction Yes / No Type BELLCORE GR 20 / IEC 794-16 Attenuation @ 1310nm<= 0.40 db/KM Typical <=0.50 MAX Yes / No @1550nm <= 0.30 dB/KM Typical <=0.40 MAX Yes / No7 Cut Off Wave length <1260 Yes / No8 @ 1310nm 9.3 + - 0.5 Yes / No Mode Field Diameter @1550nm 10.5 + - 1.09 Yes / No Clad Diameter (um) 125 + - 110 Yes / No Concentricity (um) <=0.611 Yes / No NON-Circularity (%) <=112 Yes / No Coat Diameter 245 + - 1013 Zero Dispersion Yes / No Wavelength (um) 1310 + - 1014 Yes / No Tensile Strength 1500 Newtons15 Yes / No Crush Resistance 440 N/cm16 Bend Radius Yes / No (Installation/Unloaded) 10 D / 20 D17 Yes / No Cable Diameter 9.0 + - 0.5 mm18 Yes / No Lose Tube Diameter 3.0 + - 0.15 mm19 Operating Yes / No Temperature -40 Degree C to +70 Degree C
Fiber Optic LIU with Pigtails, Splice Trays& Splice Protectors (Fully Loaded)Sr No. Specifications Requirement Compliance Deviation1 Connector Type SC-Style, Simplex Yes / No2 Operating temperature -40 Degree C to +85 Degree C Yes / No3 Durability & color Yes / No3 MM connectors 500 cycles, Beige Yes / No4 SM connectors 220 cycles, Blue Yes / No5 Ferrules Pre-radiused Ceramic Ferrules Yes / No6 Attenuation Not more than 0.75 dB per mated pair Yes / No7 Fiber Optic Patch panels9 FMS- Front Patching / 1U • 19” / ETSI versions available Yes / No Splicing Shelf The FMS fiber management shelf series is Yes / No ideal for high density front patching applications. Its compact design and high density capacity Yes / No allows it to deliver carrier class fiber management to central offices,POPs, FTTx, mobile systems and LANs. • High Density: Yes / No 1U: 12/24 Fiber terminations Yes / No • Should be supplied loaded with secondary Yes / No coated SC pigtails • Mounting brackets can be placed in different Yes / No positions10 • Drawer concept allows for o Easy access to splicing tray Yes / No o Easy access to back side of connector Yes / No • Trays with hinges(book type) which allows Yes / No facilitates easy fiber management and greater access during installation and rework • Fiber guides, radius controls & secure tie Yes / No downs provided11 Dimensions Width- 450 mm & Depth - 280 mm , Height – Yes / No 44 mm12 Color RAL 7035 / Black Yes / No
SC to SC Patch Cord Sr No. Specifications Requirement Compliance Deviation 1 Make and Type SC to SC Duplex Fiber Optic Patch Cord 3 Mtr,9/125 Yes / No Micron 2 Cable Sheath LSZH Yes / No 3 Cable Diameter Yes / No 2.5 mm twin zip 4 Ferrule Yes / No Ceramic 5 Buffer Yes / No .9 mm easy strip 6 Insertion Loss MAX .3 db Typical .15 db Yes / No 7 Return Loss > 45 db Yes / No 8 Temperature Range -25 Deg. C +70 Deg. C Yes / No 9 Yes / No ROHS ROHS/ELV CompliantSC to LC Patch Cord Sr No. Specifications Requirement Compliance Deviation 1 SC to LC Duplex Fiber Optic Patch Cords 3m 9/ 125 Yes / No Make and Type– micron 2 Cable Sheath LSZH Yes / No 3 Yes / No Cable Diameter 1.8 mm mini twin zip 4 Ferrule Ceramic Yes / No 5 Buffer .6 mm Yes / No 6 Return Loss > 45 db Yes / No 7 Insertion Loss .1 db Typical Max .3 db Yes / No 8 Yes / No ROHS ROHS/ELV Compliant23 Warranty Owner seeks warranty for the installed cable plant from the OEM equipment supplier. Bidder shall ensure that the OEM norms for supply, installation, testing and documentation as specified by the OEM supplier shall be adhered to, provided those are in line with TIA / EIA standards and Owner requirement specifications. The warranty shall be provided by the OEM vendor to Owner and shall be administered in India. The duration of the warranty shall be for a minimum of 25 years and shall cover the system performance, application assurance and the costs of the supply of components and installation.