3. 2010 Accomplishments Toyota was the #1 selling brand for the 3rd consecutive year Best ever Toyota share - 14.9% #1 retail manufacturer in America Camry has been the #1 selling car in America 12 of the last 13 years Corolla was 2nd best selling car in America
4. Special Guests Bob Carter Group Vice President and General Manager, Toyota Division Chris Hostetter Group Vice President, Strategic Resources Jeff Bracken Vice President-Sales, Toyota Division
5. Special Guests Mike Groff Group Vice-President, Sales, Product & Marketing Martin De Szily Corporate Manager, Central Region Mark Thompson Sales Manager, Central Region
12. TDA Board Phil Weber, President Anderson Weber Toyota Kevin Riley, Vice-President Riley Toyota Ray Adams, TreasurerAdams Toyota Tom Pappas, Secretary Tom Pappas Toyota Jess Hull Performance Toyota Kevin BottsQuality Toyota Cedric TheelCedric Theel Toyota
13. Toyota Dealer Council Jim Lewis, ChairmanLewis Toyota of Dodge City Steve Kurtz Performance Toyota of KC John Weiss Weiss Toyota of South County Tony Stubblefield Reliable Toyota Brandon Steven Eddy’s Toyota Tom Ballard Performance Toyota of Lincoln John McEleneyMcEleney Toyota Casey Johnson Fort Dodge Toyota Dan Porter Dan Porter Motors
15. Pillars of Success xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Toyota Care Camry Training Scion
16.
17. Kansas City Region – Toyota Motor Sales January 13, 2011 Dealer Meeting Automotive Digital Marketing andInternet Sales Opportunities Presented by Ralph Paglia National Digital Marketing Strategy Consultant to Toyota Motor Sales, Inc.
18.
19. Executed Digital Marketing and Sales Strategy that generated 144,000+ leads and over 7,000 vehicle sales at single-point dealer 2006-2007
21. Worked w/Ford in 2007-2010 to develop first fully integrated multi-publisher Tier 3 Digital Marketing Consulting and Online Advertising program
22. First retail automotive Behavioral Targeting Digital Advertising program while at Courtesy Chevrolet in 2005, 2006 and 2007
23. Internet Sales and Marketing Consultant to Toyota, Ford, Mercedes-Benz, GM, Honda, Hyundai, Kia and 250+ dealers
24. Started generating Internet leads in 1988 using CompuServe ISP access and vehicle listings on defense contractor BBS’s in Southern California 505.301.6369 rpaglia@gmail.com www.ADMPC.com
25. Toyota Kansas City Region Top Performing Digital Marketing Dealers Based on 4 Digital Marketing Performance Metrics reviewed, analyzed and assessed for objective results and subjective evaluations… Website Traffic GenerationTotal volume of dealership website visitors Web Conversion RatePercent of website visitors who complete/submit a form Phone Conversion RatePercent of website visitors who call dealership Total Lead VolumeTotal business opportunities generated from website
26. The Super Seven KC Region Dealers that stood out as “Best in Class” Dealer Website Total Traffic Marketers Toyota of Des Moines Molle Toyota Superior Toyota Cedar Rapids Toyota Pappas Toyota Eddy's Toyota of Wichita Olathe Toyota
27. The Super Seven KC Region Dealers that stood out as “Best in Class” Dealer Website Form Conversion Marketers Molle Toyota Wilson Toyota Coad Toyota Olathe Toyota Jay Wolfe Toyota Toyota of Iowa City Pappas Toyota
28. The Super Seven KC Region Dealers that stood out as “Best in Class” Dealer Website Phone Conversion Marketers Toyota of Iowa City MidWest Toyota Coad Toyota Frank Fletcher Toyota Riley Toyota Superior Toyota Crown Toyota
29. The Super Seven KC Region Dealers that stood out as “Best in Class” Dealer Website Total LeadGeneration Molle Toyota Superior Toyota Olathe Toyota Toyota of Iowa City Eddy's Toyota of Wichita Lou Fusz Toyota Adams Toyota
30. Word of Mouth MarketingReputation Management If we sell a thousand cars and do a great job with a 999 customers, but fail to satisfy one… Can you guess which customer is most likely to post an online review of our dealership?
31. Why should Toyota dealers pay attention to Online Reviews and Ratings? Reputation Management for Toyota Dealers Charts
40. Why should Toyota dealers pay attention to Social Media? Social Media Marketing Value to Car Dealers Generate moretraffic to the dealer’s eCommerce websites Customer“Top Of Mind” awareness in dealer’s market area Improved Search Engine Results Page (SERP) Rankings Effective Reputation Management strategy that alerts dealers to what is being published, rewards and guides satisfied customers towards posting positive reviews Dealer establishes Thought Leadership in local community with a customer segment that is difficult to reach Employee engagement with Social Media that is guided, advantageous to the dealership, controlled and monitored Increased sales of Vehicles, Service and Parts
SmartArt custom animation effects: basic radial(Intermediate)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Relationship. In the Relationship pane, click Basic Radial (sixth row, second option from the left), and then click OK to insert the graphic into the slide. On the slide, select the SmartArt graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, in the top level bullet, enter the text for the center circle of the graphic. In the second-level bullets, enter the text for all the other shapes in the SmartArt graphic. With the SmartArt graphic still selected, on the Design tab, in the Themes group, click Colors, and then select Median. Under SmartArtTools, on the Format tab, in the Size group, do the following:In the ShapeHeight box, enter 5”. In the ShapeWidth box, enter 7.5”.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click SmartArtStyles, and then under Best Match for Document select IntenseEffect (fifth option from the left).On the Home tab, in the Font group, click the button next to FontColor, and then under ThemeColors select Black, Text 1 (first row, second option from the left). On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, under Surface, do the following:In the Material list, under SpecialEffect, select SoftEdge (first row, second option from the left).In the Lighting list, under Neutral, select Harsh (first row, fourth option from the left).In the Angle box, enter 30°.Press and hold CTRL, and select all five shapes in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Shadow in the left pane. In the Shadow pane, in the Presets list, under Outer select OffsetBottom (first row, second option from the left), and then do the following:In the Transparency box, enter 65%.In the Size box, enter 103%.In the Blur box, enter 9 pt.In the Angle box, enter 90°.In the Distance box, enter 3 pt.To reproduce the SmartArt effects on this slide, do the following:On the slide, select the center circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.On the slide, select the top circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 20 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 15 pt.Press and hold SHIFT, and then on the top circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 20.Drag the top circle approximately 0.5” to the right.Select the right circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Gold, Accent 4 (first row, eighth option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 12 pt.Press and hold SHIFT, and then on the right circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 28 pt.Drag the right circle slightly toward the right corner of the slide.One the slide, select the bottom circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors click Green, Accent 5 (first row, ninth option from the left)Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box enter 24 pt. Also under Bevel, to the right of the Top list, in the Height box enter 12 pt.Press and hold SHIFT, and then on the bottom circle, drag a corner adjustment handle away from the center to increase the size.On the Home tab, in the Font group, in the Font Size box, enter 28.On the slide, select the left circle in the SmartArt graphic, and then on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.In the Color list, under ThemeColors select Olive Green, Accent 3 (first row, seventh option from the left).Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left).Also under Bevel, to the right of the Top list, in the Width box, enter 30 pt. Also under Bevel, to the right of the Top list, in the Height box, enter 30 pt.Press and hold SHIFT, and then on the left circle, drag a corner adjustment handle toward the center to decrease the size.On the Home tab, in the Font group, in the Font Size box, enter 40, and then click Bold.Drag the top circle slightly toward the bottom of the slide.To reproduce the line effects on this slide, do the following:Press and hold CTRL, and then select each of the four lines connecting the circles in the SmartArt graphic. On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Line Color in the left pane, select Gradient line in the Line Color pane, and then do the following:In the Type list, select Linear.In the Direction list, select Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left). In the Transparency box, enter 100%.Also in the FormatShape dialog box, click LineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.5 pt.In the Dashtype list, select RoundDot (second option from the top).To reproduce the animation effects on this slide, do the following:On the Animation tab, in the Animations group, click CustomAnimation. On the slide, select the SmartArt graphic, and then in the CustomAnimation task pane, to the following:Click AddEffect, point to Entrance, and select MoreEffects. In the AddEntranceEffect dialog box, under Moderate, select Zoom.Click the arrow to the right of the zoom entrance effect, and then select EffectOptions. In the Zoom dialog box, do the following:On the Effect tab, in the Zoom list, select In from ScreenCenter.On the Timing tab, in the Speed list, select 1 seconds (Fast). On the SmartArtAnimation tab, in the Group graphic list, select From center one by one. In the CustomAnimation task pane, expand the contents of the list by clicking the double arrow under the zoom entrance effect, and then do the following:Select the first effect (zoom entrance effect), and under Modify: Zoom, in the Start list, select WithPrevious.Select the second effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the second effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box dothe following:On the Effect tab, in the Direction list, select FromBottom.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the fourth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the fourth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the sixth effect (zoom entrance effect), click Change, point to Entrance, and select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the sixth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromLeft.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).Select the eighth effect (zoom entrance effect), click Change, point to Entrance, and then select MoreEffects. In the ChangeEntranceEffect dialog box, under Basic, select Wipe.Click the arrow to the right of the eighth effect (now wipe effect) and select Effect Options, and then in the Wipe dialog box, dothe following:On the Effect tab, in the Direction list, select FromRight.On the Timing tab, in the Delay box, enter 0.5.On the Timing tab, in the Speed list, select 0.5 seconds (VeryFast).To reproduce the background on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.In the Direction, list click From Center (third option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row, second option from the left). Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).
