Marvin Commercial Doors

888 views

Published on

Marvin Wood and Clad Commercial Doors

Published in: Design, Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
888
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
0
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Marvin Commercial Doors

  1. 1. MarvinCommercial Doors
  2. 2. Standard Raised and Flat Panels Standard Option for Marvin French Doors and Commercial Doors
  3. 3. Standard Option Available Wood or Clad Standard panel configuration is one wide, one high Consistent placement of intermediate rail Consistent visible panel height Panels use exterior grade MDF substrate with wood laminated surfaces
  4. 4. Standard Panel Placement Commercial Doors offer two standard panel heights Option #1: 6” intermediate rail placed 39 13/16” on center from the bottom of the door (sill) Visible panel height: 24 9/16” Option #2: 6” intermediate rail placed 23 11/16” on center from the bottom of the door (sill) Visible panel height: 10 ¾”
  5. 5. Handing Industry standards One wide –LHR, or RHR Two wides –RHRA Basics
  6. 6. Handing Single Operators LHR RHR = SECURE (KEYED)
  7. 7. Handing Pairs of Doors RHRA = SECURE (KEYED)
  8. 8. Standard Features 4 ½” x 4 ½” ball bearing hinges No lock / no bore Low profile sill – thermally broken Insulated glass Beveled meeting stiles
  9. 9. Hardware Hinge Finish Options Satin Chrome – standard default (US26D) Bronze (US10A) Brass (US3) Stainless Steel (US32D)
  10. 10. Hardware Standard door is no lock / no bore Commercial hardware package (CHP) Closer Removable MullionRim or mortise lock Kick plate
  11. 11. Hardware Rim Device Finishes Satin Chrome Bronze Brass
  12. 12. Hardware Mortise lock with lever Finishes Satin Chrome 06 (D Rhodes) Bronze N Escutcheon Brass
  13. 13. Hardware Closer Finishes Aluminum Dark Bronze Brass
  14. 14. Hardware Protection (Kick) Plate Finishes Stainless Steel Bronze Brass
  15. 15. Hardware FINISH MATRIX If Locking Device Finish Is: US26D US10B US3 Panic Rim Satin Chrome Bronze Brass 626 613 603 Mortise Lock/Lever Satin Chrome Bronze Brass Hardware Finish Defaults are: US26D US10A US3 Hinges* Satin Chrome Bronze Brass BHMA 689 BHMA 695 BHMA 696 Closer Aluminum Dark Bronze Brass US32D US10B US4 Protection (kick) Plate Stainless Steel Bronze Brass SP28 SP313 SP313 Removable Mullion Sprayed Aluminum Bronze Bronze -Sill finish does not default and must be selected independently of hardware. *Stainless Steel also available but not as a default.
  16. 16. FINISH CHART BASE MATERIAL DESIGNATION FOR BHMA FINISHES A = Steel Base Material B = Brass & Bronze Base Material C = Stainless Steel Base Material BHMA FinishUS Finish Description A B C 1B Black 601 601 N/A 2C Zinc Plated, Commercial 603 N/A N/A 3 Bright Brass 632 605 N/A 4 Satin Brass 633 606 N/A 5 Satin Brass, Oxidized 638 609 N/A 7 Bright Brass, Nickel Oxidized & Highlighted 636 610 N/A 9 Bright Bronze 637 611 N/A 10 Satin Bronze 639 612 N/A 10A Antique Bronze Lacquered 641 614 N/A 10B Antique Bronze Oiled 640 613 N/A 14 Bright Nickel 645 618 N/A 15 Satin Nickel 646 619 N/A 15A Satin Nickel, Nickel Oxidized & Highlighted 647 620 N/A 17A Black Nickel, Dull 648 621 N/A 20 Statuary Bronze, Light 649 623 N/A 20A Statuary Bronze, Dark 650 624 N/A 26 Bright Chromium Plated 651 625 N/A 26D Satin Chromium Plated 652 626 N/A 32 Stainless Steel Metal, Bright N/A N/A 629 32D Stainless Steel Metal, Satin N/A N/A 630 P Prime Coat, Beige 600 600 N/A
  17. 17. Sills Low Profile Sill Options Finishes Mill Standard Bronze ¼” Saddle Gold Offset Saddle

×