Painted Interior Finish Research indicated that 80% of the windows and doors that are painted are painted white What white? Not too bright Not too yellow Not too gray Mid-range color/gloss
Painted Interior Finish How does it compare to Integrity? Different paint suppliers Integrity Marvin Slightly different processes/equipment Different primer requirements Marvin meets or exceeds WDMA TM-14 Most people believe Marvin and Integrity can be mixed on a project with no noticeable difference in paint color Color similarity between the brands came through strongly during our research
Painted Interior Finish Technical InformationPaint Supplier Akzo Nobel Founded in 1646 Based in Amsterdam In over 80 countries
Painted Interior Finish Technical InformationTop Coat- Paint Semi-Gloss Water Based Acrylic Enamel Manufactured by Akzo Nobel Meets or exceed WDMA TM-14-09
Painted Interior Finish Product Aesthetics All products will be painted then assembled The benefit to this process is that primer and paint are applied evenly to the wood parts, giving consistent coverage Joinery seams should be expected The appearance of shadow lines normally associated with seams may be enhanced by the contrast with the white finish Natural features and characteristics of the wood, including wood grain, will be present, radiating the warmth and character of the real wood
Painted Interior Finish Product Aesthetics Painted areas Primary surfaces Secondary surfaces Plus Under UCA operator sill covers Under door hinges and under escutcheons
Painted Interior Finish Product Availability All current Pine products Windows and Doors Wood or Clad Note: When purchasing a wood exterior unit with a painted interior finish – a primed exterior is required due to potential light overspray to the exterior portion. All interior wood accessories i.e. SDL, Retractable screens, Removable grilles, etc.Note: *Series 50 removable grilles will be painted on all sides* 23
Painted Interior Finish Touch up/Repair For Minor Dings and Scratches Lightly sand with 220-400 grit sandpaper Feather edges Remove dust with tack cloth Apply paint Air dry 30-40 minutes or use hair dryer to accelerate Use caution with heat source as to not blister the surface Touch-up bottle of paint available .75 fl oz with applicator brush (part # 11401906)
Painted Interior Finish Touch up/Repair To remove dirt and scuff marks Begin with least aggressive procedure Soft damp cloth with plain water – wipe clean- dry area Soft damp cloth with plain water with 3 to 5 drops of detergent (such as Dawn Liquid) per pint of water – wipe clean- remove any detergent residue- dry area Soft cloth dampened with isopropyl alcohol – wipe clean- dry area Soft cloth dampened with 409 cleaner -wipe clean- remove any cleaner residue- dry area **Do not use abrasive cleaners on any painted surface**
Painted Interior Finish Repainting If there is ever a need or desire to paint the window or door another color the following procedure should be followed Abrade surface with 220-320 grit sand paper De-gloss surface Remove dust with tack cloth Apply a high quality paint per instructions 32
Painted Interior Finish Cleaning Treat it like a piece of furniture Furniture polish Spray on to soft cloth, not directly onto window Soft cloth dampened with water Avoid using any cleaners that are abrasive or contain a colored dye 33
Painted Interior Finish WarrantyFive (5) Year Warranty Free from finish defects: cracking, peeling, checking, delamination, blistering, flaking, excessive chalking, fading or change in color in excess of 5 Delta-E Hunter units under normal interior environmental conditions Raised grain or other natural variation is not a defect Paint is applied prior to assembly and is not intended to cover joinery seams Products with factory-applied primer only are not covered under this provision
Painted Interior Finish WarrantyFive (5) Year Warranty The appearance of raised grain or other natural variation in the wood grain may be enhanced by the interior factory finish and is not a defect. Features and characteristics of wood, including wood grain, will be present, reflecting the warmth and character of real wood.
Painted Interior Finish WarrantyFive (5) Year Warranty Painted Interior Finish is applied prior to assembly and is not intended to cover joinery seams. Marvin applies a coat of primer and a separate coat of paint to each wood piece before the window or door is assembled. The benefit to this process is that primer and paint are applied evenly to the wood parts giving consistent coverage. As a result of this process, seams will be visible and should be expected. The appearance of shadow lines normally associated with seams may be enhanced by the contrast with the white finish.
Painted Interior Finish WarrantyFive (5) Year Warranty Products with factory-applied primer only are not covered under this provision. Factory-applied primer must be painted in accordance with Marvin’s finishing instructions within 90 days of installation. Keep in mind that Integrity does not offer a prime only option, and therefore, this provision does not apply to Integrity product