Fermit Brochure, salesATprojectsalescorp.com

436 views
294 views

Published on

Published in: Business, Technology
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
436
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Fermit Brochure, salesATprojectsalescorp.com

  1. 1. Productcatalogue 2011 Fermit GmbH
  2. 2. SANITARY EQUIPMENTTHREAD SEALS Clean and non-toxicNEO FERMIT UNIVERSAL Non-sticky Does not irritate skin For metal threaded connections in conjunction with hemp Suitable for gas and drinking water in domestic equipment installation. Solvent-free Non-shrinking Area of use: Non-hardening Water – for drinking water, hot and cold: Temperature range: 0°C to +95°C / Pressure: 16 bar Area of use: Heating: Temperature range: 0°C to +130°C / Pressure: 7 bar Does not dry up Area of use: Gas: Temperature range: -20°C to +70°C / Pressure: 5 bar Dismountable Use: for all types of gas including natural gas and liquefied petroleum gas in the gaseous phase 150g tube 325g tube 450g tin 800g tin 4kg bucket 01002 01003 01004 01005 01007 According to DIN EN 751-2 and DIN 30660 approved by DVGW (German Gas and Water Association) for domestic installation of gas and drinking water under: DVGW – Reg. No. NV-5142BM0052.HEMP Flax Use together with the sealing pastes Neo Fermit Universal, Fermit-Spezial and Hochdruck-Fermit. Improves the stability of the connection under pressure. Temperature resistance: +140°C 200g tress 80g bobbin 40g bobbin Dispenser 40g flax dispenser 80g flax dispenser 24002 24003 24007 24004 24005 24006 Easy to work withFERMIT SPEZIAL (service water) Seals immediately Can be dismounted at any time Light-coloured thread sealing paste, can be worked easily and quickly and does not harden. Does not dry up Application in conjunction with hemp. Reliable and safe Not for gas and drinking water units in domestic equipment installation. Temperature range: -25°C to +100°C 70g tube 650g tin 5kg bucket 02001 02003 02004 For all threads according to DIN 2999 up to a diameter of 2 inches. Gas, water, heating and compressed air units up to a maximum pressure of 10 bar. In the case of flange seals coat both sides with Fermit-Spezial. Productcatalogue 3
  3. 3. SANITARY EQUIPMENTTHREAD SEALS Easy to work withHOCHDRUCK-FERMIT Does not dry up Connections can be undone again Pressure-proof and heat-resistant putty, also in conjunction with hemp Non-toxic, pasty putty for sealing threads, Heat and high pressure-resistant flanges and faces on high-pressure equipment, Reliable/safe turbine casings, steam lines etc. Can be stressed immediately Temperature range: up to +160°C / Pressure: 16 bar 650g tin 5kg bucket 03001 03003 For all threads according to DIN 2999 up to 2 inches in diameter Coat flanges, faces and intermediate shims on both sides with Hochdruck-Fermit Easy to work withFERMITOL liquid Seals can be put into service immediately Versatile liquid synthetic resin sealant Integrated brush Universal sealing compound and glue, resistant to oil; liquefied Practical in use petroleum gas, petrol, benzene, paraffin/kerosene, greases, water, Instant sealing steam, acid, alkaline solution, brine, seawater etc. ..., once set also Reliable – safe resistant to spirit and all fuel mixtures Economical For the sealing of threads, flanges and faces on water, petrol, grease and oil lines, Can be used with and oil heating units, propane gas units, engines, engine casings, gearboxes, machines, without hemp process equipment and tanks. Fermitol is suitable for many purposes and numerous materials. Temperature range: -10°C to +130°C / Pressure: 4 bar 125g bottle 250g bottle 1kg refill bottle 04001 04002 04004 Use without hempFERMITAN service water Suitable for hot and cold water Can be subjected to Anaerobic sealant for cylindrical and conical metal threads pressure quickly for hot and cold water circuits . Enriched with PTFE Temperature range: -30°C to +90°C, briefly up to 110°C Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar Polymerisation time: 1 – 3 hours Max. thread diameter: 2 inches Max. thread play: 0,25mm 75ml bottle 05001 Use without hemp Heating Suitable for hot water, gas and oil circuits Anaerobic sealant for cylindrical and conical metal threads Can be subjected to for hot water circuits in the heating field as well as oil and fuel oil and for all pressure very quickly combustible gases such as butane, propane, natural gas and for compressed air. Enriched with PTFE Temperature range: -30°C to +90°C, briefly up to 120°C Pressure: After 15 min = 4 bar, after 2 hrs = 30 bar Max. thread diameter: 2 inches Polymerisation time: 1 – 3 hours Max. thread play: 0,25mm 75ml bottle 05002 According to DIN EN 751-1 class H, DVGW-Reg.-No. NG-5146 BU 0219. Productcatalogue 4
  4. 4. SANITARY EQUIPMENTTHREAD SEALS dismantlablePTFE tape easy and quickly applicable not flammable and does not burn PTFE thread sealing tape for metal threads Application in all sanitary and heating circuits in the hot and cold no use-by date water areas. DVGW tested. DIN EN 751-3 resistant against fungal attacks Temperature range: -60°C to +260°C / Pressure: 20 bar does not swell up FRp; DN < 10 / GRp: 10 < DN < 50 PTFE Goldenband DVGW and BAM tested and approved, DIN EN 751-3, DIN 30660 KTW; for natural gas, oxygene, lye, chemicals, oil, water, gasoline, and so on Temperature range: -400°F to +500°F / -240°C to +260°C / Pressure: 30 bar for oxygen: up to 60°C and 40 bar . Liquid and gaseous FRp GRp GoldenBand 24010 24011 24012 dismantlablePTFE pipe sealing thread easy and quickly applicable not flammable and does not burn FERMIT PTFE pipe sealing thread • DIN-DVGW for gas and water installations according to EN751-3 FRp and GRp no use-by date and DIN 30660 (NV-5143BP0261), tested & approved up to 100 bar pressure in resistant against fungal attacks accordance with EN751-3 for gases of the 1st, 2nd and 3rd family and for hot water does not swell up • DIN DVGW tested & approved for pipe adjustments up to 45°, for hot & cold & drinking for all types of threads out of water in accordance with KTW recommendations of the German Health Ministry metal or plastic • WRAS listed product for U.K. Water Regulations Advisory Scheme for use for solar installation with hot and cold water (Ref. 0212515) with integrated cutter • ASTM F423 Steam & Cold Water Cycle Test - passed no drying • BAM tested & approved for use with gaseous oxygen at 30 bar and 100°C remains soft and pliable (for use with the installation aid, II-2742/2004E) • BAM tested & approved for use with liquid oxygen at 30 bar and 100°C (use without installation aid, II-2742/2004E) • UL Listed Seal Material 10BN File MH26734 according to Outline 1321 for use in assemblies handling gasoline, petroleum oils, naphta, propane, butane, benzene, kerosene and natural gas (<300 psig) • KIWA GASTEC Qa (NL): norm. 31, class "20" • Absolutely chemical resistant to most aggressive chemicals, solvents, fuels and acids, completely resistant to surface fouling, oxidation, embrittlement, fungal or bacterial growth, enzymatic or microbiological attack Installation: Beginning at the end of the thread, wrap in a overlapping haphazard fashion in the direction of the thread, apply 2 or 3 drops of the installation aid directly from the separate dispenser and smear over the PTFE with the finger, concentrate at the end of the pipe and cover only 10 to 15 mm of the thread The manufacturer`s guidelines on the number of wraps are: 1/2" pipe 12 (fine threads) to 18 (coarse threads) wraps 1 1/2" pipe 16 (fine threads) to 24 (coarse threads) wraps for other pipe diameters adjust the number of wraps Temperature range: -200°C to +240°C / Pressure: 30 bar up to 100°C for oxygen, up to 100 bar for hot water Thread sealing tape 175 m 24013 Productcatalogue 5
  5. 5. SANITARY EQUIPMENTINSTALLATION PUTTIES Permanently plasticPLASTIC FERMIT – white Ductile Economical a permanently plastic sealing compound Plastic-Fermit is a permanently plastic, kneadable sealant com- Can be worked quickly pound based on plastic which meets the highest demands made on Does not become brittle sanitary installation. Good adhesion power Is particularly suitable for the insertion of drain valves in, for exam- Storable indefinitely ple, washstands, baths and is suitable for hot and cold water. Temperature range: 0°C to 120°C. Do not use for marble or other natural stone! 250g tin 500g tin 1kg tin 5kg bucket 06001 06002 06003 06004 ViscoplasticAQUA FERMIT - red Easily kneadable Strong adhesion power Sealant and sleeve putty without hardening Putty with strong adhesion power for washstands and water closet Reliable - Safe bowls as well as sewerage units or sleeves on buried lines. Temperature range: 0°C to 100 °C 250g tin 500g tin 5kg bucket 07001 07002 07004LUBRICANTS Food-safeGLISSA VALVE AND FITTING GREASE Non-dripping Ductile Non-dripping lubricating grease for hot and cold water valves and fittings. Ductile, smooth, non-dripping lubricating grease for valves and fit- Reliable tings, that with regard to food law is beyond reproach and is there- fore also suitable for drinking water pipes. Can also be used for machines and equipment where Glissa valve and fitting grease comes into contact with food or drinking water. Temperature range: -20°C to + 140°C. 60g tube 30g tube 14g tube 15001 15002 15003 In conformity with the KTW recommendations of the German Federal Health Office, is approved according to NSF-H 1 and to DIN 51502. SyntheticGLISSA ALLGAS VALVE GREASE Non-dripping Ductile High-grade lubricant for gas valves and fittings and actuators in accordance with DIN EN 377. Suitable for gas valves and fittings Glissa all gas valve grease is resistant to all gases and gas mixtures mentioned in DVGW worksheet G 260. It is also used for greasing cock plugs or sealing elements such as membranes, packings or elastomer seals etc. Temperature range: up to 150°C 20g tube 15010 Corresponds to DIN DVGW 96.01e 1055 Productcatalogue 7
  6. 6. HEATING EQUIPMENTREFRACTORY PRODUCTS Easy to work withFROSCHMARKE REFRACTORY BOILER PUTTY Asbestos-free Non-shrinking Sealing putty on potassium water glass basis. Non-shrinking refractory boiler putty e.g. for sealing off from flue Seals well gases during the use of boiler equipment, ovens and stoves. Adheres well to metal and other materials Temperature-resistance: more than +1000°C Non-crumbling 250g tin 500g tin 1kg tin 6kg bucket 20kg bucket 310ml cartridge 11001 11002 11003 11005 11006 11007 very good adhesivenessREFRACTORY GLUE HT 1100 very high temperature resistance no smoke development Adhesive for fireproof construction units Refractory glue HT 1100 is for sticking together fireproof construction easy to apply units and for fastening of glass fibre or ceramic fibre sealing cords, fireclay materials to metal parts, gluing of jacket tubes, sleeves and other fireclay parts, setting fireclay bricks in stoves and heating units, designed to adhere insulating board, ... Temperature resistance: 1100°C Colour: beige Storage time: 24 months cool and dry in a closed packing 310ml cartridge 17ml tube 11301 11302SEALANTS Highly refractoryFERMITOPP HN 300 Odourless Hot air-resistant Highly refractory, neutral cross-linked elastic single-package silicon sealant Reliable - Safe Fermitopp SE 300 is used for sealing expansion joints on heating UV resistant flues, ovens, reactors, chimneys, stacks, etc., also applicable in the colourfast automotive sector. Temperature range: -50°C to +250°C / Processing temperature: +5°C to +40°C Skin formation: approx 10 min. / Time to complete cure: approx. 2 mm per day Storage time: 12 months cool and dry 310ml cartridge red 310 ml cartridge black 16004 16005 Highly refractoryFERMITOPP HE 300 Hot air-resistant Reliable - Safe Highly refractory, acetic crosslinked sealant elastic single-package silicon sealant UV resistant Fermitopp SE 300 is used for sealing expansion joints on heating colourfast flues, ovens, reactors, chimneys, stacks, etc., also applicable in the automotive sector. Temperature range: -50°C to +250°C (in spikes up to 300° C) Processing temperature: +5°C to +40°C / Skin formation: approx 10 min. Time to complete cure: approx. 2 mm per day / Storage time: 18 months cool and dry 310ml cartridge red 16013 Productcatalogue 10
  7. 7. HEATING EQUIPMENTMAINTENANCE Protection from rustNIVO GRAPHITE PASTE – Flexoperm Highly refractory Versatile Highly refractory sealing paste for threaded and flanged joints Prevents the sticking of gaskets, bolts, screws etc. which are expo- Reliable - Safe. sed to intense heat. In the case of flange gaskets and surface seals, coat both sides with the paste. In the case of use as sealants for threads (DIN 2999) at over 160 degrees C, the use of aluminium hemp with Nivo Graphite Paste is recommended as normal hemp becomes scaly at these temperatures and then leaks can occur. Temperature range: 0°C to +300°C 500g tin 13001 Low cost3-D-SEALANT Versatile Easy to use Liquid sealant for small leaks. 3-D-SEALANT closes pores, cracks or damage to gaskets and seals on heating boilers, radiators, pumps, cylinder blocks and car radiators from the inside so that they are absolutely water and steam pressure-tight. 3-D-SEALANT is not suitable for the sealing of particularly narrow pas- sages such as, for example, in the case of thermostat valves. Input quantity: 1kg of 3-D-Sealant for 150 l of heating water Preparation: thoroughly mix 1 kg of 3-D-Sealant with approx. 10 l of hot water 1kg bottle 14001 Productcatalogue 11

×