La única empresa representante en el Perú de equipos médicos veterinarios Midmark

1. Anesthesia
Midmark Animal
Health Products

2. The first and still the best. High quality, all-metal
construction
The all-metal construction in
Safe, simple and controllable combination with high quality
inhalation anesthesia… rubber seals and hoses provide
Matrx anesthesia machines
TM a durable, pressurized system
that requires little maintenance.
are the number one choice
for veterinary professionals Dome-type inhalation/
exhalation valves
around the world. Easy-to-view inhalation/
exhalation valves allow easy
monitoring of respiration for
patient safety. Twist-off domes
allow for easy removal for
cleaning after each use.
Quick release lever
1500cc CO2 absorber with quick
release lever feature for easy
absorbent replacement (accepts
prepack canisters or 1350gm
loose absorbent).
Matrx VMS® Plus
Matrx Spartan VMC®
Matrx VMS®
Over fifty years of quality manufacturing experience go into every
Matrx™ Occlusion Valve Emergency Air Intake Valve
Matrx™ anesthesia machine. The Matrx VMS® and VMS® Plus small with Safety Relief opens automatically to
animal anesthesia machines have been a long-standing favorite easily attaches to Matrx™ provide room air to patient if
with veterinary professionals for quality, safety and ease of use, anesthesia machines, the oxygen supply is depleted.
and now they include our Occlusion Valve with Safety Relief. Give allowing you to simply
and quickly close the
your patients the best and enjoy the peace of mind that comes
breathing circuit to bag
from partnering with Midmark. (sigh) your patient.

3. Matrx anesthesia machines are carefully
TM
manufactured to provide you with years
of safe, simple and controllable VMS® and Swing Arm Mount
with Canis Major® Lift Table.
VME® Ventilator Shelf
Optional, add-on shelf for
anesthesia delivery. With wall, stand, Swing Arm Mount is also ventilator mounting.
available for the VME®
tabletop, and table-mounted
configurations, we are sure to have the
anesthesia delivery solution that fits
your clinical needs.
Have peace of mind knowing that over 50 years
of manufacturing experience goes into every
Matrx™ anesthesia machine.
Matrx™ VMR Low-flow
Non-rebreathing System
Provides rapid control of anesthesia
depth with little resistance to respiration;
designed for small rodents, exotics and
patients weighing less than five pounds.
Matrx VME2® Small Animal
Anesthesia System
Place all of your anesthesia
equipment on one sleek, compact
post. Optional, add-on components
allow for multiple configurations
Matrx VME® Tabletop/Wall
and unparalleled flexibility.
Mount System
Flexibility and performance at an
economical price. The convenient
carry handle with soft vinyl grip
allows for easy mobility.
Matrx VML® Large Animal Anesthesia System
Designed for use in equine, bovine and other large animal
anesthesia, this machine features a 2" (5cm) diameter breathing
circuit, 5200cc CO2 absorber and 30 Liter breathing bag.

4. Matrx™ vaporizers and ventilators...
The choice of veterinary
professionals for accurate, Accessories that fit your needs...
controlled anesthesia
delivery under all conditions.
Anesthesia Accessories Ventilator Accessories
Ayres Non-rebreathing System with Adapters
Scavenger Adapter
Bellows
Breathing Circuits
Demand Wye
Cardell® Monitor Mounts
Mounting Arms/Plates
Central Gas/Manifold Systems
Replacement Parts
Cylinder Mounting Blocks Small Animal Induction Chambers
Stands
Dual Gas Supply Tee
Supply Hose
Sevoflurane VIP 3000® Endotracheal Tubes
Hoses
Laryngoscope Blades and Handles
Maintenance Kits
Matrx VIP 3000® Vaporizer
Matrx™ Occlusion Valve with Safety Relief
The choice of veterinary professionals, the VIP 3000® uses proven design
principles to ensure output concentration is virtually unaffected by flow rate, Matrx™ Veterinary Rubber Goods
temperature variations, duration of use, liquid level or back pressure Small Animal Anesthesia Masks
fluctuation within its clinical range. Isoflurane VIP 3000® Mayo Tray Cart
Oxygen Flowmeters
Scavenger Systems
Small Animal Anesthesia Masks
Small Animal Induction Chambers
Cardell® Monitor Mount with VMS® Plus
Matrx™ Model 3000 Small Animal Anesthesia Ventilator
An electronic, time-cycled, pressure-limited ventilator that
Vaporizer Service and MatrxTM VXP Vaporizer Exchange Program
replaces the breathing bag to provide smooth, even delivery
To assure continued accuracy and reliability, every Matrx™ vaporizer should be serviced and calibrated annually. We offer
of anesthesia. The Model 3000 assures constant volume for
you the choice of sending your vaporizer to Midmark for service or allow you to exchange it for a replacement VXP Vaporizer.
each delivered breath, regardless of patient compliance and
Either way, you know your vaporizer has been cleaned, calibrated, tested and is ready to use for another year.
airway resistance. Easy-to-use controls make operation
simple and convenient.

5. Specifications
W H AT D O YO U WA N T I N A S T E R I L I Z E R ? M9 M11 M 9 & M 1 1 U LT R A C L AV E ®
Overall length w/plug: 20.38" (51.8 cm) 23.8" (60.5 cm)
Overall width: 15.3" (38.9 cm) 17.8" (45.2 cm)
Overall height w/printer: 15.8" (40.1 cm) 17.8" (45.2 cm)
Minimum Countertop area: 15.3" x 17.88" (38.9 cm x 45.4 cm) 17.8" x 21.0" (45.2 x 53.3 cm)
Chamber: 9" diameter (22.9 cm), 15" depth (38.1 cm) 11" diameter (28 cm), 18" depth (45.7 cm)
3.5 gal. usable volume (13.4 liters) 6.5 gal. usable volume (24.6 liters)
Trays: Two large – 7.3" W x 12" L x 0.8" D Two large – 9" W x 15" L x 1.1" D
(18.6 cm x 30.5 cm x 2.2 cm) (22.9 cm x 38 cm x 2.9 cm)
Two small – 5.6" W x 12" L x 0.8" D Two small – 6.6" W x 15" L x 1.1" D
(14.3 cm x 30.5 cm x 2.2 cm) (16.8 cm x 38 cm x 2.9 cm)
Unit weight: 73 lbs. (33.1 kg) 99 lbs. (44.9 kg)
Shipping weight: 81 lbs. (36.7 kg) 131 lbs. (59.4 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters) 1.4 gal. (5.3 liters)
Electrical requirements: 115 VAC, 50/60 Hz, 15 amps single phase 115 VAC, 50/60 Hz, 15 amps single phase
115 VAC has 1425 watt tubular immersion heater 115 VAC has 1425 watt tubular immersion heater
230 VAC, 50/60 Hz, 10 amps single phase 230 VAC, 50/60 Hz, 10 amps single phase
230 VAC has 1500 watt tubular immersion heater 230 VAC has 1500 watt tubular immersion heater
UL61010A-1, UL61010A-2-041 UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010 CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96 CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and Meets the requirements of ASME Boiler and
Pressure Vessel Code Pressure Vessel Code
Canadian registration number available Canadian registration number available
A separate (dedicated) circuit is recommended A separate (dedicated) circuit is recommended
for this sterilizer for this sterilizer
Optional accessories: 9A259001 – Impact Dot Matrix Printer 9A259001 – Impact Dot Matrix Printer
9A224001 – Sterilizer Deep Tray 9A225001 – Sterilizer Deep Tray
9A226001 – Sterilizer Pouch Rack 9A226001 – Sterilizer Pouch Rack
9A307001 – Cool Hand Tool 9A307001 – Cool Hand Tool (Tray & Cassette Removal Tool)
(Tray & Cassette Removal Tool)
9A260001 – External Condensing Tank
9A260001 – External Condensing Tank
9A215001 – Horizontal Cassette Rack
9A215002 – Vertical Cassette Rack
9A306001 – Orthodontic Cassette Rack
Installation Installation
Use on laminate, stainless steel or stone surface. Allow 2.0" Use on laminate, stainless steel or stone surface. Allow 2.0"
(5.08 cm) on sides and rear and 5" (12.7 cm) above to allow (5.08 cm) on sides and rear and 5" (12.7 cm) above to allow
space to fill reservoir and change the printer paper roll. space to fill reservoir and change the printer paper roll.
n Fast and easy use for efficient instrument processing
n Reliability and effectiveness for infection control assurance
n Patented automatic opening door for efficient instrument drying
M3 UltraFast® Automatic Sterilizer M11D and M9D AutoClave® Sterilizers
n Maximum space utilization and a complementary design
The Midmark M3 UltraFast® Automatic The Midmark M9D and M11D AutoClave® Automatic Sterilizers offer easy,
Sterilizer allows you to rapidly process effective sterilization, but without the convenience of a door that opens
for your sterilization area your instruments. The M3 provides automatically. One button starts the cycle – but at the end of the automatic
reliable, fast sterilization and quickly sterilization process, you need to manually open the door within 30 minutes
dries your instruments. of completion to activate the dry cycle. This extra step is the only physical
Our full line of sterilizers addresses all of your important critical difference between the M9D and M11D and their automatic counterparts.
sterilization needs. In fact, we’re sure you’ll find a Midmark
sterilizer that’s just right for your practice. Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0640-00 Rev. D1 (4/12)

6. Specifications
W H AT D O YO U WA N T I N A S T E R I L I Z E R ? M9 M11 M 9 & M 1 1 U LT R A C L AV E ®
Overall length w/plug: 20.38" (51.8 cm) 23.8" (60.5 cm)
Overall width: 15.3" (38.9 cm) 17.8" (45.2 cm)
Overall height w/printer: 15.8" (40.1 cm) 17.8" (45.2 cm)
Minimum Countertop area: 15.3" x 17.88" (38.9 cm x 45.4 cm) 17.8" x 21.0" (45.2 x 53.3 cm)
Chamber: 9" diameter (22.9 cm), 15" depth (38.1 cm) 11" diameter (28 cm), 18" depth (45.7 cm)
3.5 gal. usable volume (13.4 liters) 6.5 gal. usable volume (24.6 liters)
Trays: Two large – 7.3" W x 12" L x 0.8" D Two large – 9" W x 15" L x 1.1" D
(18.6 cm x 30.5 cm x 2.2 cm) (22.9 cm x 38 cm x 2.9 cm)
Two small – 5.6" W x 12" L x 0.8" D Two small – 6.6" W x 15" L x 1.1" D
(14.3 cm x 30.5 cm x 2.2 cm) (16.8 cm x 38 cm x 2.9 cm)
Unit weight: 73 lbs. (33.1 kg) 99 lbs. (44.9 kg)
Shipping weight: 81 lbs. (36.7 kg) 131 lbs. (59.4 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters) 1.4 gal. (5.3 liters)
Electrical requirements: 115 VAC, 50/60 Hz, 15 amps single phase 115 VAC, 50/60 Hz, 15 amps single phase
115 VAC has 1425 watt tubular immersion heater 115 VAC has 1425 watt tubular immersion heater
230 VAC, 50/60 Hz, 10 amps single phase 230 VAC, 50/60 Hz, 10 amps single phase
230 VAC has 1500 watt tubular immersion heater 230 VAC has 1500 watt tubular immersion heater
UL61010A-1, UL61010A-2-041 UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010 CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96 CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and Meets the requirements of ASME Boiler and
Pressure Vessel Code Pressure Vessel Code
Canadian registration number available Canadian registration number available
A separate (dedicated) circuit is recommended A separate (dedicated) circuit is recommended
for this sterilizer for this sterilizer
Optional accessories: 9A259001 – Impact Dot Matrix Printer 9A259001 – Impact Dot Matrix Printer
9A224001 – Sterilizer Deep Tray 9A225001 – Sterilizer Deep Tray
9A226001 – Sterilizer Pouch Rack 9A226001 – Sterilizer Pouch Rack
9A307001 – Cool Hand Tool 9A307001 – Cool Hand Tool (Tray & Cassette Removal Tool)
(Tray & Cassette Removal Tool)
9A260001 – External Condensing Tank
9A260001 – External Condensing Tank
9A215001 – Horizontal Cassette Rack
9A215002 – Vertical Cassette Rack
9A306001 – Orthodontic Cassette Rack
Installation Installation
Use on laminate, stainless steel or stone surface. Allow 2.0" Use on laminate, stainless steel or stone surface. Allow 2.0"
(5.08 cm) on sides and rear and 5" (12.7 cm) above to allow (5.08 cm) on sides and rear and 5" (12.7 cm) above to allow
space to fill reservoir and change the printer paper roll. space to fill reservoir and change the printer paper roll.
n Fast and easy use for efficient instrument processing
n Reliability and effectiveness for infection control assurance
n Patented automatic opening door for efficient instrument drying
M3 UltraFast® Automatic Sterilizer M11D and M9D AutoClave® Sterilizers
n Maximum space utilization and a complementary design
The Midmark M3 UltraFast® Automatic The Midmark M9D and M11D AutoClave® Automatic Sterilizers offer easy,
Sterilizer allows you to rapidly process effective sterilization, but without the convenience of a door that opens
for your sterilization area your instruments. The M3 provides automatically. One button starts the cycle – but at the end of the automatic
reliable, fast sterilization and quickly sterilization process, you need to manually open the door within 30 minutes
dries your instruments. of completion to activate the dry cycle. This extra step is the only physical
Our full line of sterilizers addresses all of your important critical difference between the M9D and M11D and their automatic counterparts.
sterilization needs. In fact, we’re sure you’ll find a Midmark
sterilizer that’s just right for your practice. Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0640-00 Rev. D1 (4/12)

7. RELIABLE Pulse-air Removal Technology Safety Features
The Steam-Flush Pressure-Pulse Air Removal System is so If the door is not closed completely or the reservoir water level
efficient that it can pass the air removal tests required on more is low, the LCD display will provide the appropriate message.
complex vacuum steam sterilizer systems, ensuring good steam In either case, sterilization will not continue until you’ve
penetration for those challenging loads. Plus, less complexity attended to the unit.
means better reliability and a cost effective solution for your
Ease of Draining & Filling
sterilization needs.
The Midmark M9 and M11 UltraClave Automatic ®
For ease of draining and filling, both the M9 and M11’s
Sterilizers make sterilization reliable and efficient. Convenience at a Glance
reservoir fill port and drain tube are in the front of the unit,
The LCD display indicates cycle selected, cycle temperature and not on top or in back.
Today, more than ever, you need reliable and easy to use
exposure time. When the cycle enters sterilization mode, the
products from a trusted partner who understands your Optional Printer Accessory
temperature, pressure and the remaining cycle time is displayed.
sterilization needs. The Midmark M9 and M11 UltraClave® Remaining cycle time is also displayed in the dry mode. The M9 and M11 printer accessory provides a permanent
Automatic Sterilizers are specifically designed and Note: Temperature & pressure are not displayed during dry mode. record of cycle times, temperatures and pressures during
a cycle.
engineered to meet those needs. The intuitive display and No More Wet Instruments
simple prompts help you easily select the cycle you need Once sterilization is complete, the door opens automatically and
whether it is for unwrapped items, pouches, packs or quietly to dissipate steam and dry your instruments. You’ll have
dry, sterile instruments every time.
handpieces. Once the sterilization process is complete,
the door conveniently opens automatically and quietly to
dissipate steam and provide fast and efficient drying of
your instruments.
Create peace of mind by making the dental market’s leading
sterilizers – the Midmark M9 and M11 UltraClave® – your
preferred office choice.
Symbol Pre-programmed Sterilization Hot Cycle Time Sterilization Dry Time Total Hot Cycle Total Hot Cycle Self Program Controls Pre-Programed Controls LCD Display
Cycle Temperature Time Time w/o dry Time w/dry
(Fill, Heat-up & Vent) Programmable controls allow Four pre-programmed Indicates cycle selected,
M9 M11 M9 M11 M9 M11 M9 M11 M9 M11 M9 M11 for creation of different cycle sterilization cycle controls: temperature and exposure
Pouch Rack Vertical Cassette Rack Horizontal Cassette Rack
Unwrapped
132˚ C 132˚ C
11 min. 15 min. 3 min. 3 min. 30 min. 30 min. 14 min. 18 min. 44 min. 48 min.
parameters. Programmable Unwrapped (132º C or 270º F time. During the cycle,
M9 - 1 pouch rack (M11 only) (M11 only) 270˚ F 270˚ F buttons allow you to change for 3 minutes), Pouches (132º the display shows messages
M11 - 2 pouch racks Holds four 8" x 11" and four Holds four 8" x 11" and four 132˚ C 132˚ C the following: Exposure Time C or 270º F for 5 minutes), describing status of cycle.
Pouches 12 min. 17 min. 5 min. 5 min. 30 min. 30 min. 17 min. 22 min. 47 min. 52 min.
3" x 8" cassettes. 3" x 8" cassettes. 270˚ F 270˚ F (3 to 90 minutes), Temperature Packs (121º C or 250º F for When the cycle enters
121˚ C 121˚ C (230 to 275º F), Dry Time (0 30 minutes), Handpieces sterilization mode, remaining
Packs 10 min. 14 min. 30 min. 30 min. 30 min. 30 min. 40 min. 44 min. 70 min. 74 min. to 60 minutes) and Vent (slow (unwrapped and pouched) time is displayed as well as
250˚ F 250˚ F
or fast). The #1 and #2 buttons (132º C or 270º F for temperature and pressure.
Handpieces 132˚ C 132˚ C
(Unwrapped & Pouches)
11 min. 16 min. 6 min. 6 min. 30 min. 30 min. 17 min. 22 min. 47 min. 52 min. allow you to store the change 6 minutes).
270˚ F 270˚ F
if desired. Cycle Start Button
Initiates selected cycle
NOTE: Cycle times are approximate and may vary depending on instrument loads.
Preset drying is 30 minutes but can be programmed from 0 to 60 minutes.
Manual Stop Button
Terminates selected cycle
or function

8. Specifications
W H AT D O YO U WA N T I N A S T E R I L I Z E R ? M9 M11 M 9 & M 1 1 U LT R A C L AV E ®
Overall length w/plug: 20.38" (51.8 cm) 23.8" (60.5 cm)
Overall width: 15.3" (38.9 cm) 17.8" (45.2 cm)
Overall height w/printer: 15.8" (40.1 cm) 17.8" (45.2 cm)
Minimum Countertop area: 15.3" x 17.88" (38.9 cm x 45.4 cm) 17.8" x 21.0" (45.2 x 53.3 cm)
Chamber: 9" diameter (22.9 cm), 15" depth (38.1 cm) 11" diameter (28 cm), 18" depth (45.7 cm)
3.5 gal. usable volume (13.4 liters) 6.5 gal. usable volume (24.6 liters)
Trays: Two large – 7.3" W x 12" L x 0.8" D Two large – 9" W x 15" L x 1.1" D
(18.6 cm x 30.5 cm x 2.2 cm) (22.9 cm x 38 cm x 2.9 cm)
Two small – 5.6" W x 12" L x 0.8" D Two small – 6.6" W x 15" L x 1.1" D
(14.3 cm x 30.5 cm x 2.2 cm) (16.8 cm x 38 cm x 2.9 cm)
Unit weight: 73 lbs. (33.1 kg) 99 lbs. (44.9 kg)
Shipping weight: 81 lbs. (36.7 kg) 131 lbs. (59.4 kg)
Water reservoir capacity: 1.1 gal. (4.1 liters) 1.4 gal. (5.3 liters)
Electrical requirements: 115 VAC, 50/60 Hz, 15 amps single phase 115 VAC, 50/60 Hz, 15 amps single phase
115 VAC has 1425 watt tubular immersion heater 115 VAC has 1425 watt tubular immersion heater
230 VAC, 50/60 Hz, 10 amps single phase 230 VAC, 50/60 Hz, 10 amps single phase
230 VAC has 1500 watt tubular immersion heater 230 VAC has 1500 watt tubular immersion heater
UL61010A-1, UL61010A-2-041 UL61010A-1, UL61010A-2-041
CAN/CSA C22.2 No. 1010 CAN/CSA C22.2 No. 1010
CAN/CSA C22.2 No. 1010.2-041 96 CAN/CSA C22.2 No. 1010.2-041-96
Meets the requirements of ASME Boiler and Meets the requirements of ASME Boiler and
Pressure Vessel Code Pressure Vessel Code
Canadian registration number available Canadian registration number available
A separate (dedicated) circuit is recommended A separate (dedicated) circuit is recommended
for this sterilizer for this sterilizer
Optional accessories: 9A259001 – Impact Dot Matrix Printer 9A259001 – Impact Dot Matrix Printer
9A224001 – Sterilizer Deep Tray 9A225001 – Sterilizer Deep Tray
9A226001 – Sterilizer Pouch Rack 9A226001 – Sterilizer Pouch Rack
9A307001 – Cool Hand Tool 9A307001 – Cool Hand Tool (Tray & Cassette Removal Tool)
(Tray & Cassette Removal Tool)
9A260001 – External Condensing Tank
9A260001 – External Condensing Tank
9A215001 – Horizontal Cassette Rack
9A215002 – Vertical Cassette Rack
9A306001 – Orthodontic Cassette Rack
Installation Installation
Use on laminate, stainless steel or stone surface. Allow 2.0" Use on laminate, stainless steel or stone surface. Allow 2.0"
(5.08 cm) on sides and rear and 5" (12.7 cm) above to allow (5.08 cm) on sides and rear and 5" (12.7 cm) above to allow
space to fill reservoir and change the printer paper roll. space to fill reservoir and change the printer paper roll.
n Fast and easy use for efficient instrument processing
n Reliability and effectiveness for infection control assurance
n Patented automatic opening door for efficient instrument drying
M3 UltraFast® Automatic Sterilizer M11D and M9D AutoClave® Sterilizers
n Maximum space utilization and a complementary design
The Midmark M3 UltraFast® Automatic The Midmark M9D and M11D AutoClave® Automatic Sterilizers offer easy,
Sterilizer allows you to rapidly process effective sterilization, but without the convenience of a door that opens
for your sterilization area your instruments. The M3 provides automatically. One button starts the cycle – but at the end of the automatic
reliable, fast sterilization and quickly sterilization process, you need to manually open the door within 30 minutes
dries your instruments. of completion to activate the dry cycle. This extra step is the only physical
Our full line of sterilizers addresses all of your important critical difference between the M9D and M11D and their automatic counterparts.
sterilization needs. In fact, we’re sure you’ll find a Midmark
sterilizer that’s just right for your practice. Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0640-00 Rev. D1 (4/12)

9. Specifications
soniclean®
M150 M250 M550
Overall length: 12" (30.48 cm) 15.5" (39.37 cm) 18" (45.72 cm)
Overall width: 16" (40.64 cm) 16" (40.64 cm) 24" (60.96 cm)
Overall height: 14.5" (36.83 cm) 14.5" (36.83 cm) 14.5" (36.83 cm)
Tank Size: 11.5"W x 6"L x 6"D 11.5" W x 9.5"L x 6"D 19.5"W x 11.5" L x 6"D
(29.21 x 15.24 x 15.24 cm) (29.21 x 24.13 x 15.24 cm) (49.53 x 29.21 x 15.24 cm)
Water tank capacity: 1.5 gal. (5.7 liters) 2.5 gal. (9.5 liters) 5.5 gal. (20.8 liters)
Unit weight: 12 lbs. (5.4 kg) 14 lbs. (6.4 kg) 26 lbs. (11.7 kg)
Shipping weight: 17 lbs. (7.7 kg) 20 lbs. (9.1 kg) 40 lbs. (18.1 kg)
Electrical Requirements: M150-001 M250-001 M550-001
Input: 115 VAC +/-10%, 50/60 Hz, 130W, 1.1A Input: 115 VAC +/-10%, 50/60 Hz, 180W, 1.5A Input: 115 VAC +/-10%, 50/60 Hz, 320W, 2.7A
Output: 100 W, 42kHz +/-10% Output: 135 W, 42kHz +/-10% Output: 250 W, 42kHz +/-10%
CSA Listed CSA Listed CSA Listed
TUV and FCC Registered TUV and FCC Registered TUV and FCC Registered
M150-002 M250-002 M550-002
Input: 220 VAC +/-10%, 50/60 Hz, 130W, 0.6A Input: 220 VAC +/-10%, 50/60 Hz, 180W, 0.8A Input: 220 VAC +/-10%, 50/60 Hz, 320W, 1.5A
Output: 100 W, 42kHz +/-10% Output: 135 W, 42kHz +/-10% Output: 250 W, 42kHz +/-10%
CSA Listed CSA Listed CSA Listed
TUV and FCC Registered TUV and FCC Registered TUV and FCC Registered
Warranty: 2 year limited warranty 2 year limited warranty 2 year limited warranty
Optional Accessories: 9A290001 – Safety Basket
*Does not include required safety basket 9A292001 – Safety Basket basket
*Does not include required safety 9A294001 – Safety Basket basket
*Does not include required safety
Installation – Half Basket
9A291001 9A293001 – Half Basket
Installation 9A289001 – Accessory Kit
Installation
Use on laminate, stainless steel or stone surfaces.
9A285001 – Accessory Kit 9A287001 – Accessory Kitor stone surfaces.
Use on laminate, stainless steel 9A407001 – Dental Cassette stone surfaces.
Use on laminate, stainless steel or Rack
Allow 2.5" (6.4 cm) on sides and rear, and 12" Allow 2.5" (6.4 cm) on sides and rear, and 12" Allow 2.5" (6.4 cm) on sides and rear, and 12"
9A286001 – Accessory Kit with Half Basket
(30.5 cm) above, to allow space to fill the tank. 9A288001 – Accessory Kit with the tank.
(30.5 cm) above, to allow space to fill Half Basket (30.5 cm) above, to allow space to fill the tank.
9A295001 – Dental Cassette Rack
Cleaning Solutions Cassette Racks
Midmark Ultrasonic Cleaning Solutions The M250 Cassette Rack holds three
effectively clean blood, tissue and 8" x 11" cassettes.
mucus fast and effectively. General *The M250 Soniclean® will not accept the
standard 8" x 11" HuFriedy® cassette. A
Purpose Cleaner, Tartar and Stain
special HuFriedy® 8" x 10.5" cassette (Part#
Remover, and Enzymatic Cleaning IM416Q) is available for use in the M250
Solution do the work for you. Soniclean®.
The M550 Cassette Rack holds six
8" x 11" cassettes.
Accessory Kit Accessory Kit with Half Basket
Includes safety basket, beakers, beaker Includes safety basket, beakers, beaker
positioning cover with rings and beaker positioning cover with rings, beaker lids
lids. (M250 kit shown) and basket lid. (M250 kit shown)
Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0623-00 Rev. E1 (3/12)

10. Quiet
Midmark Soniclean® Ultrasonic Cleaners are some
of the quietest in the healthcare industry.
No one will argue that ultrasonic cleaning is the fastest, most
consistent and safest method of cleaning instruments and
components. But, because ultrasonic cleaners emit a high
pitched sound, no one ever accused them of being quiet…
until now.
The Midmark Soniclean® uses a high frequency transducer that
allows the unit to perform quietly. Tiny cavitation bubbles are
produced with the higher frequency, allowing the bubbles to
penetrate smaller crevices. This results in a powerfully quiet
ultrasonic cleaner.
The Midmark Soniclean® is also extremely easy to operate -
simply load your instruments and set the timer.
You’ll be impressed with how Every office has different ultrasonic
effectively the Soniclean® handles cleaning needs depending on the
your instrument cleaning needs. number of patients and the types of
Other ultrasonic cleaners use a procedures being performed. That’s
standard slim wafer transducer, why Midmark provides you with
limiting the maximum sound three size options that can be placed
The external drain is Recess unit for a lower profile Unique, stack transducer pressure that can be generated to on the countertop or recessed.
accessible and easy to use 2-3 watts per square inch.
The Soniclean® utilizes an An independent national laboratory Excellent Noise in Decibels Poor
industrial-type ultrasonic stack ranked the Soniclean® “the quietest
transducer, resulting in a cleaner ultrasonic cleaner” among all units
that is capable of reaching 12-15 tested. In addition, it was the only
watts per square inch. This unit ranked “excellent” for noise
58 59 63 65 71 75 82 84
superior acoustic pressure comfort. That’s important for your
generated by the stack transducer, staff and patients. Soniclean ® Soniclean ® Biosonic ® Sonix IV Health Sonics ® Ultrasonik™ Ultrasonik™ Sweepzone ®
M150 M250 UC100 SS117 T3.3C 28X 28B S140
coupled with the Soniclean’s
Overlapping Wave Frequency
(OWF) technology, produces Soniclean is ranked quietest among this group of ultrasonic cleaners by an independent national organization.
powerful cavitation. More power
in the tank translates to cleaning
your instruments more efficiently.

11. Specifications
soniclean®
M150 M250 M550
Overall length: 12" (30.48 cm) 15.5" (39.37 cm) 18" (45.72 cm)
Overall width: 16" (40.64 cm) 16" (40.64 cm) 24" (60.96 cm)
Overall height: 14.5" (36.83 cm) 14.5" (36.83 cm) 14.5" (36.83 cm)
Tank Size: 11.5"W x 6"L x 6"D 11.5" W x 9.5"L x 6"D 19.5"W x 11.5" L x 6"D
(29.21 x 15.24 x 15.24 cm) (29.21 x 24.13 x 15.24 cm) (49.53 x 29.21 x 15.24 cm)
Water tank capacity: 1.5 gal. (5.7 liters) 2.5 gal. (9.5 liters) 5.5 gal. (20.8 liters)
Unit weight: 12 lbs. (5.4 kg) 14 lbs. (6.4 kg) 26 lbs. (11.7 kg)
Shipping weight: 17 lbs. (7.7 kg) 20 lbs. (9.1 kg) 40 lbs. (18.1 kg)
Electrical Requirements: M150-001 M250-001 M550-001
Input: 115 VAC +/-10%, 50/60 Hz, 130W, 1.1A Input: 115 VAC +/-10%, 50/60 Hz, 180W, 1.5A Input: 115 VAC +/-10%, 50/60 Hz, 320W, 2.7A
Output: 100 W, 42kHz +/-10% Output: 135 W, 42kHz +/-10% Output: 250 W, 42kHz +/-10%
CSA Listed CSA Listed CSA Listed
TUV and FCC Registered TUV and FCC Registered TUV and FCC Registered
M150-002 M250-002 M550-002
Input: 220 VAC +/-10%, 50/60 Hz, 130W, 0.6A Input: 220 VAC +/-10%, 50/60 Hz, 180W, 0.8A Input: 220 VAC +/-10%, 50/60 Hz, 320W, 1.5A
Output: 100 W, 42kHz +/-10% Output: 135 W, 42kHz +/-10% Output: 250 W, 42kHz +/-10%
CSA Listed CSA Listed CSA Listed
TUV and FCC Registered TUV and FCC Registered TUV and FCC Registered
Warranty: 2 year limited warranty 2 year limited warranty 2 year limited warranty
Optional Accessories: 9A290001 – Safety Basket
*Does not include required safety basket 9A292001 – Safety Basket basket
*Does not include required safety 9A294001 – Safety Basket basket
*Does not include required safety
Installation – Half Basket
9A291001 9A293001 – Half Basket
Installation 9A289001 – Accessory Kit
Installation
Use on laminate, stainless steel or stone surfaces.
9A285001 – Accessory Kit 9A287001 – Accessory Kitor stone surfaces.
Use on laminate, stainless steel 9A407001 – Dental Cassette stone surfaces.
Use on laminate, stainless steel or Rack
Allow 2.5" (6.4 cm) on sides and rear, and 12" Allow 2.5" (6.4 cm) on sides and rear, and 12" Allow 2.5" (6.4 cm) on sides and rear, and 12"
9A286001 – Accessory Kit with Half Basket
(30.5 cm) above, to allow space to fill the tank. 9A288001 – Accessory Kit with the tank.
(30.5 cm) above, to allow space to fill Half Basket (30.5 cm) above, to allow space to fill the tank.
9A295001 – Dental Cassette Rack
Cleaning Solutions Cassette Racks
Midmark Ultrasonic Cleaning Solutions The M250 Cassette Rack holds three
effectively clean blood, tissue and 8" x 11" cassettes.
mucus fast and effectively. General *The M250 Soniclean® will not accept the
standard 8" x 11" HuFriedy® cassette. A
Purpose Cleaner, Tartar and Stain
special HuFriedy® 8" x 10.5" cassette (Part#
Remover, and Enzymatic Cleaning IM416Q) is available for use in the M250
Solution do the work for you. Soniclean®.
The M550 Cassette Rack holds six
8" x 11" cassettes.
Accessory Kit Accessory Kit with Half Basket
Includes safety basket, beakers, beaker Includes safety basket, beakers, beaker
positioning cover with rings and beaker positioning cover with rings, beaker lids
lids. (M250 kit shown) and basket lid. (M250 kit shown)
Midmark is an ISO 13485 and ISO 9001 Certified Company.
For more information or a demonstration, contact your Midmark
dealer or call: 1-800-MIDMARK Fax: 1-877-725-6495
Outside the U.S.A. call: 1-937-526-3662 Fax: 1-937-526-8214
or visit our website at midmark.com
© 2007 Midmark Corporation
60 Vista Drive P.O. Box 286 Versailles, Ohio 45380-0286
Products subject to improvement changes without notice
Litho in U.S.A. 007-0623-00 Rev. E1 (3/12)