Prof hamada

701 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
701
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
0
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Prof hamada

  1. 1. ประวัติและผลงาน ของ Prof. Hiroyuki HAMADA เพื่อประกอบการพิจารณามอบปริญญากิตติมศักดิ์ วิศวกรรมศาสตรบัณฑิต ภาควิชาวิศวกรรมวัสดุและโลหการ1) ประวัติสวนตัว  ชื่อ - สกุล Hiroyuki HAMADA วัน เดือน ปเกิด พฤศจิกายน 2498 (November, 1955) อายุ 55 ป ที่อยูปจจุบัน  Matsugasaki, sakyo-ku, kyoto, 606-8585, JAPAN โทรศัพท +81-75-724-78442) ประวัตการศึกษา ิ • ปริญญาตรีวิศวกรรมศาสตรบัณฑิต (B.Eng), Doshisha University, 1978 • วิศวกรรมศาสตรมหาบัณฑิต (M.Eng), Doshisha University, 1980 • ดุษฏีวิศวกรรมศาสตรบัณฑิต (Dr.Eng), Doshisha University, 19853) ประวัตการทํางาน ิ • นักวิจัย (Research Associate), Osaka Municipal Technical Research Institute, April, 1986 • ตําแหนงรองศาสตราจารย (Associate Professor), Kyoto Institute of Technology, October, 1987 • ตําแหนงศาสตราจารย (Professor), Kyoto Institute of Technology, March, 1998 • Director of Venture Laboratory of the Graduate School and dean of the Division of Advanced Fibro Science, 2011 • Director of Future-Applied Conventional Technology Centre in Kyoto Institute of Technology (F-ATC), 2011
  2. 2. 4) ผลงานทางวิชาการ หนังสือ Title Author Publisher Month/Year Design and H. Hamada and S. V. Hoa Technomic Publishing 1997.01 Manufacturing of Company Composites Design and H. Hamada and S. V. Hoa Technomic Publishing 1998.08 Manufacturing of Company Composites 3-D texitile H. Hamada, S. Woodhead Publishing 1999.12 reinforcements in Ramakrishna, Z. M. Huang Limited composite materials Design and H.Hamada, S. V. Hoa, J. Technomic Publishing 2000.03 Manufacturing of Lo, A. Yokoyama Company Composites Natural Fibers, Amar K. Mohanty, Taylor & Francis 2005.01 Biopolymers, and Manjusri Misra, Lawrence Group Biocomposites T. Drzal, Hiroyuki Hamada, 66 บทความวิจัย และผลงานเผยแพร Subject, etc. Author Publisher Year / Month Effect of Silane Treatment on Fracture N. Ikuta, H. Hamada, E. 2003.04 Process of Glass Fiber in Single Nishio, I. Abe, and Z. Filament Coupon Test, Transactions of Maekawa, the Society of Fiber Science and Technology, Japan, 47, 4,178-183 The Mechanical Properties of M. Sakaguchi, A. Nakai, H. Elsevier 2000.04 Unidirectional Thermoplastic Hamada and N. Takeda Science Ltd Composites Manufactured by a Micro- Braiding Technique, Composites Science and Technology, 60, 5, 717-722 Energy Absorption Properties of H. Hamada, K. Kameo, M. 2000.05 Braided Composite Rods, Composite Sakaguchi, H. Saito and M. Science and Technology, 60, 5, 723-729 Iwamoto Degradation of Braided Composites in Asami Nakai, Shinya Elsevier 2000.02 Hot Water, Composites Science and Ikegaki, Hiroyuki Hamada, Science Ltd Technology, 60,3,325-331 Nobuo Takeda Mechanical Properties of Knitted Fabric H. Hamada, K. Sugimoto, 2000.05 Composites, Reinforced Plastics and A. Nakai, N. Takeda, S.
  3. 3. Composites, 19, 5, 364-376 Gotoh, T. IshidaMechanisms of Modeiinterlaminar M. Kotaki, T. Kuriyama, H. 2000.03Fracture of Glass Woven Fabric Hamada, Z. Maekawa andComposites, Advanced Composite NarisawaLetters, 9, 3, 217-221 Subject, etc. Author Publisher Year / MonthThe Influence of Sizing Conditions on H. Hamada, K. Fujihara, A. Elsevier 2000.09Bending Properties of Continuous Glass Harada Science LtdFiber Reinforced PolypropyleneComposites, Composites partA, 31, 9,979-990Mechanical Properties of Flat Braided Takeru Ohki, Shinya 2000.08Composites with a Circular Hole, Ikegaki, Ken Kurasiki,Journal of Engineering Materials and Hiroyuki Hamada andTechnology, 122, 4, 420-424 Masaru IwamotoEffect of Surface Treatment on Mode I J.K.Kim, M.L.Sham, Elsevier 2000.06Interlaminar Fracture Behaviour of H.Hamada, Y.Hirai, Science LtdPlain Glass Woven Fabric K.Fujihara, H.Saidpour,Composites:Part I. Report of the 2nd M.Sezen, Y.J.Dong,Round-Robin Test Results, Composite H.S.Yang, Y.L.Bai,Interfaces, 7, 3, 227-242 T.X.Mao, C.Bathias, S.V.Hoa, A.Boutella, A.D.Ngo, P.Krawczak, R.Bequignat, J.Pabiot, S.Pinter, G.Banhegyi, L.T.Drzal, H.Ho, C.Y.Yue, K.Padmanabhan, Y.Suzuki, T.Tanimoto, K.Schulte, J.K.Karger-Kocsis, W.J.Cantwell, R.Zulkitli, L.Ye, J.J.Lesko and K.GarciaRole of surface treatment in textile A. Nakai, T. Osada, H. Elsevier 2001.04composites, Composites partA, 32, , Hamada, N. Takeda Science Ltd487-498Mechanical Properties of Flat Braided Asami Nakai, Akio Ohtani, Elsevier 2001.05Composite with Flexible Interphase, Takeru Ohki, Toshiko Science LtdComposite Interfaces, 7,( 5,6), 399-410 Osada, Masaharu Iwamoto, Hiroyuki Hamada and Nobuo TakedaMechanical Properties and Micro- Asami Nakai, Takeru Ohki, Elsevier 2001.05Fracture Behaviors of Flat Braided Nobuo Takeda, Hiroyuki Science LtdComposites with a Circular Hole, HamadaComposite Structures, 52, , 315-322Micro/Macro Damage Evaluation of Takeru Ohki, Asami Nakai, 2000.02Flat Braided Composites with a Hiroyuki Hamada andCircular Hole, Science and Engineering Nobuo Takeda
  4. 4. of Composite Materials, 9, 2, 55-66Interfacial Properties of PP/PP Takeo Kitayama, Kentaro 2000.02Composites, Science and Engineering Ishikura, Tatsuro Fukui andof Composite Materials, 9, 2, 67-73 Hiroyuki Hamada Subject, etc. Author Publisher Year / MonthAnnealing Effect in Glass Woven M. Kotaki, T. Kuriyama, H. Elsevier 2001.05Fabric Composites, Part I. Mode I and Hamada, Z. Maekawa and Science LtdII Interlaminar Fracture Behavior, I. NarisawaComposite Interfaces, 7,(5,6), 363-383Influence of Aging and Surface C. Suri, H. Hamada and K. Elsevier 2001.02Treatment on the Mode II Fracture Hujihara Science LtdBehaviour in a Glass/VinylesterComposite, Composite Interfaces, 8, 2,135-149Flexural Properties of a Hybrid Polymer I. J. DAVIS and H. Hamada 2001.01Matrix Composite Containing Carbonand Silicon Carbide Fibres, Adv.Composite Mater, 10, 1, 77-96Crushing Properties of Pultruded Glass H. Saito, R. Inai, H. 2002.01Reinforced Square Tubes, IJCrash, 7, 1, Hamada21-33Energy Absorption of Braiding Hiroshi Saito, Elsevier 2002.03Pultrusion Process Composite Rods, E.C.Chirwa, Ryuji Inai, Science LtdComposite Structures, 55, , 407-417 Hiroyuki HamadaEffect of Hybrid Layers with Different Jang-kyo Kim, Man-Lung Elsevier 2001.08Silane Coupling Agents on Impact Sham, Min-Seok Sohn, Science LtdResponse of Glass Fabric Reinforced Hiroyuki HamadaVinylester Matrix Composites,Polymer, 42, ,7455 7460Effects of Surface Treatment and J. K. Kim, M. L. Sham, H. Elsevier 2002.02Weave Structure on Interlaminar Hamada, Y. Hirai, K. Science LtdFracture Behaviour of Plain Glass Fujihara, H. Saidpour, M.Woven Fabric Composites:Part Sezen, P. Krawczak, R.II.Report of the 2nd Round Robin Test Bequignat, J. Pabiot, S.Results, Composite Interfaces, 9, 2, Pinter, G. Banhegyl, C. Y.207-218 Yue, K. Padmanabhan, Y. Suzuki, K. Schulte, J. K. Karger-kocsis, L. Ye and J. J. LeskoStatic and Dynamic Properties of Tsuyoshi Nishiwaki, Akio Elsevier 2002.03Unidirectional CFRP Laminates with Tange, Kazuo Kitagawa Science LtdFlexible Interphase, Composite and Hiroyuki HamadaInterfaces, 9, 3, 247-258Fractography of Mode I Crack M. Mizoguchi, Y. Ma, K. 2002.01Propagation in Glass Cloth/Vinylester Inomata, K. Kitagawa, Y.Composite, Science and Engineering of Fujii, H. Hamada and M.Composite Materials, 10, 1, 29-34 Kotaki
  5. 5. Subject, etc. Author Publisher Year / MonthEffect of Fiber Surface Treatment on Yuji Higuchi, Tadayoshi 2002.08Mechanical Properties of Simizu, MachikoPolyethylene/Epoxy Composites, Mizoguchi, Tatsuro FukuiPolymer Composites, 10, 8, 589-597 and Hiroyuki HamadaDurability and Degradation on Y. Fujii, M. Mizoguchi and 2002.04Mechanism of E and ECR Glass H. HamadaReinforced Vinylester Resin underAcid and Alkali, Durability Analysis ofComposites Systems 2001, 137-140Fractography of Degraded Composites Y. Koyama, M. Mizoguchi, 2002under Acid Environments, Durability H. Hamada and Y. FujiiAnalysis of Composites Systems 2001,311-315Investigation of the Degraded GFRP M. Mizoguchi, H. Hamada 2002Stack, Durability Analysis of and Y. FujiiComposites Systems 2001, 341-344Effect of Surface Treatment Condition Miaki Shibaya, Machiko Elsevier 2002.04on Interfacial Degradation Behavior in Mizoguchi, Hiroyuki Science LtdGFRP under Acidic, Composite Hamada and YoshimichiInterface, 9, ,433-444 FujiiExperimental Investigation on the R. Inai, E C Chirwa, H. 2003.05Crushing Properties of Carbon Fibre Saito, T. Uozumi, A. NakaiBraided Composite Tubes, IJ Crash and H. Hamada2003, 8, 5, 513-521Initial Fracture Behavior of Satin Toshiko Osada, Asami Elsevier 2003.09Woven Fabric Composites, Nakai and Hiroyuki Science LtdCOMPOSITE STRUCTURES, 61, , Hamada333-339Performance Study of Braided K. Fujihara, Zheng-Ming Elsevier 2003Carbon/PEEK Composite Compression Huang, S. Ramakrishna, K. Science LtdBone Plates, Biomaterials, 24, ,2661- Satknanantham and H.2667 HamadaPrediction of Flow Patterns in the Tetsuo Mitani and Hiroyuki 2003.09Polyurethane Foaming Process by Numerical HamadaSimulation Considering Foam Expansion,POLYMER ENGINEERIING ANDSCIENCE, 43, 9, 1603-1611Flow Behavior of Sandwich Injection D. Watanabe, U. S. Ishiaku, T. 2003.02Molding in Sequential and Simultaneous Nagaoka, K. Tomari and H.
  6. 6. Injection, International Polymer Processing, , Hamada2 , 199-203 Subject, etc. Author Publisher Year / MonthAnnealing Effect in Glass Woven Fabric M. Kotaki, T. Kuriyama, H. Elsevier 2001.05Composites, PartII. Bending Properties, Hamada, Z. Maekawa and I. Science LtdComposite Interfaces, 7, (5,6),385-387 NarisawaInterfacial Properties of PP/PP Composites, T. Kitayama, S. Utsumi, H. 2003.04Journal of Applied Polymer Science, Hamada, T. Nishino, T.88, ,2875-2883 Kikutani, H. ItoDevelopment of Braided Carbon/Peek K. Fujihara, Zheng-Ming 2001.04Composite Bone Plates, Advanced Huang, S. Ramakrishna, K.Composites Letters, 10, ,13-20 Satkunanantham and H. HamadaFeasibility of Knitted Carbon/PEEK K.Fujihara, Zheng-Ming Elsevier 2004Composites for Orthopedic Bone Plates, Huang, S.Ramakrishna, Science LtdBiomaterials, 25, , 3877-3885 K.Satknanantham ,H.HamadaFabrication and Mechanical Properties of Higuchi Yuji, Nakai Asami, 2004.04PE/PE Interface-less Composites using Hamada HiroyukiMicro-braiding, Polymers PolymerComposites, 12, 4, 321-332Mechanical Properties and Internal Structure Susumu Takashima, Machiko 2003.05of Injection Molded Glass Fiber Reinforced Mizoguchi, U. S. Ishiaku andPC/ABS, ANTEC 2003, 1530-1534 Hiroyuki HamadaRelationship Between Mechanical Properties Susumu Takashima, Machiko 2003.05and Internal Structure of PC/ABS Blend Mizoguchi, U.S. Ishiaku andInjection Moldings Through Thickness Hiroyuki HamadaDirection, ANTEC 2003, 1535-1539
  7. 7. The Effect Ambient Moisture and U. S. Ishiaku, H. Hamada, M. 2003.04Temperature Conditions on the Mechanical Mizoguchi, S. Takashima, W.Properties of Glass Fiber/Carbon Fiber/Nylon S. Chow and Z. A. Mohd Ishak6 Sandwich Hybrid Composites Consisting ofSkin-Core Morphologies, ANTEC 2003,2142-2146Microstructure of Injection Molded Glass Bin Yang, Shinya Otsuki and 2003.05Fiber Reinforced PC/ABS, Annual Technical Takashi Kuriyama,SusumuConference on Society of Plastic Engineers Takasima,Hiroyuki Hamada2003, 3570-3574Influence of Geometric Shape of Void on Akihiko Goto, Kazumi 2003.05Mechanical Properties of Polyurethane Foam, Yamaguchi and HiroyukiANTEC 2003, 3575-3578 Hamada Subject, etc. Author Publisher Year / MonthEffect of Interphase Condition on Mechanical Machiko Mizoguchi, Satoko 2003.05Properties in Polyamide Pre-Impregnated Baba, Hiroyuki Hamada andGlass Fiber Reinforced Polypropylene Weiliing WuComposite, ANTEC 2003, 3732-3733The properties of GF-Reinforced M. Nomura, J. Makita and H. 2003.07Thermoplastics in Beam Structure, Polymer Hamada& Polymer Composites, 11, 7, 581-589Structure and Mechanical Properties of Fumiaki Baba, Akihiro Fujita, 2004.03Injection Molded CF/LCP Thin Plates, Chimyon Gon, Asami NakaiPolymers Polymer Composites, 12, 3, and Hiroyuki Hamada207-220The Effect of Injection speed on the Weld U. S. Ishiaku, Y. W. Leong, O. 2004.05Line Properties of Jute FIBER/POLY A. Khondker, A. Nakai and H.(Butylene) Succinate Biodegradable HamadaComposites., ANTEC 2004, 1468
  8. 8. Mechanical Properties of Injection Molded Susumu Takashima, Satoko 2004.05Glass Fiber Reinforced PC/ABS with PC- Baba and Hiroyuki HamadaOligomer, ANTEC 2004, 1907Fabrication, Processing and Tensile Omar A Khondker, Tatsuro 2004.05Properties of Weft-Knitted Hybrid Fukui, Xinyu Yang, AsamiComposites Combining Microbraiding and Nakai and Hiroyuki HamadaCompression Molding Techniques, ANTEC2004, 2683Co-Injection Molding in Metal Injection Kenji Okubo, Shigeo Tanaka, 2004.05Molding, ANTEC 2004, 570 Hiroyuki HamadaFabrication and Mechanical Properties of Tatsuro Fukui, Miyako Inoda, 2004.05Textile Insert Injection Moldings, ANTEC Asami Nakai, Hiroyuki2004, 667 HamadaEffect of Deformational Behavior of Cell Akihiko Goto,Kazumi 2004.05Structure on Mechanical Properties of Yamaguchi,Hiroyuki HamadaPolyurethane foam under CompressiveLoading, ANTEC 2004, 2009Mechanical Properties of PC/ABS Ultra Satoko Baba, Susumu 2004.05High-Speed Injection Moldings, ANTEC Takashima, Yew Wei Leong2004, 1917 and Hiroyuki Hamada Machiko.Mizoguchi and Takashi Kuriyama Subject, etc. Author Publisher Year / MonthStructure and Mechanical Properties of Glass Machiko Mizoguchi and 2004.05Fiber Reinforced PC/ABS Fabricated by Takashi Kuriyama SusumuUltra High Speed Injection Molding, Annual Takashima, SatokoTechnical Conference on Society of Plastic Baba,Hiroyuki HamadaEngineers 2004, 2869-2873
  9. 9. Evaluation of Weldline Strength of Injection Kohji Yamada, Kiyotaka 2004.04Molded Polystyrene by Surface Milling, Tomari, Toshihiko HaradaANTEC 2004, 708-712 Hiroyuki.HamadaCompounding order and Mechanical T. Okumura, H. Hamada 2004Propertiesin PP/PE/TALC Compound, Proceeding ofANTEC 2004, 2728-2732Effect of Heat-Sealing Temperature on Yasuo Hashimoto, Tsujii 2004.04 Tetsuya, Kitagawa Kazuo,Mechanical Properties at Heat-Sealed Parts inBiodegradable Plastic Film, Proceeding of Machiko Mizoguchi, YasuhiroANTEC 2004, 2447-2451 Fujita, Hiroyuki Hamada, Umaru.S.IshiakuInternal Structure of PC/ABS Injection- Hiroyuki Hamada, Kengo 2004.05Compression Moldings, ANTEC 2004, 732 Nodo, Susumu Takashima and Satoko Baba, Machiko.Mizoguchi and Takashi Kuriyama,Kiyotaka TomariMechanical and Morphological Properties of U.S. Ishiaku, Y. W. Leong, H. 2004Kevlar-Fiber Reinforced Polyamide 6,6 Hamada(PA66) Composites, Proceeding of ANTEC2004, 2971-2975Mechanical Properties of Weldline in Koji Yamada, Satoko Baba, 2004Injection Molded PC/ABS, Proceeding of Susumu Takashima, HiroyukiANTEC 2004, 718-722 Hamada, Machiko Mizoguchi, Takashi KuriyamaProcessing and Mechanical Properties of Asami Nakai, Tsutomu 2004Continuous Fiber Reinforced Thermoplastics, Narita,Eisuke Fukui, IwaoProceeding of ANTEC 2004, 1593-1596 Komiya, Hiroyuki HamadaInterfacial Properties of FILM-Insert Y. W. Leong, T. Fukui, M. 2004.03
  10. 10. Injection Molded Polyethylene- Mizoguchi, U. S. Ishiaku, H.FILM/Polyethylene Matrix, Proceeding of HamadaANTEC 2004, 1154-1157 Subject, etc. Author Publisher Year / MonthMechanical Properties of Carbonized H. Matsui, K. Kitagawa, T. 2004Bamboo Fiber Reinforced Biodegradable Semba, H. Okumura, U. S.Polymer Composite., Proceeding of ANTEC Ishiaku, H. Hamada2004, 1636-1640Prediction of Mechanical Properties of SMC Masahide Kawamura, Asami 2004.04Parts, Proceeding of ANTEC 2004, 1390- Nakai and Hiroyuki Hamada1394The Effect of Molding Condition on S. Yamaguchi,M. Mizoguchi, 2004.04Interfacial Mechanical and Morphological H. Hamada, Y. W. Leong,U. S.Properties of Film Insert Injection Molded Ishiaku, T. TsujiiPPFILM/PP Matrix, Proceeding of ANTEC2004, 1144-1148Surface Smoothness of Glass Mat Reinforced Susumu Yamaguchi, Etsuko 2004.04Polypropylene Stampable Sheet, Polymers Tanigaki and Hiroyuki Hamada Polymer Composites, 12, 4, 333-339Initial Fracture of the Welt Weft-Knitted O.A.Khondker, T.Fukui, Elsevier 2004Textile Composites, Composites partA, A.Nakai, H.Hamada Science Ltd35, ,1185-1194Fabrication and Mechanical Properties of O. A. Khondker, T. Fukui, M. Elsevier 2004.04Aramid/Nylon Plain Knitted Composites, Inoda, A. Nakai, H. Hamada Science LtdComposites partA, 35, ,1195-1205Measurements and Prediction of the O. A. Khondker, I.. Herszberg, Elsevier 2004.02Compression-After-Impact Strength of Glass H. Hamada Science LtdKnitted Textile Composites, CompositespartA, 35, 2, 145-157Influence of Processing Conditions on K. Fujihara, Zheng-Ming Elsevier 2004.04
  11. 11. Bending Property of Continuous Carbon Huang, S. Ramakrishna, H. Science LtdFiber Reinforced PEEK Composites, HamadaComposite Science and Technology,64, ,2525-2534The Effect of Molding Conditions on Y. W. Leong, S. Yamaguchi, 2004.12Mechanical and Morphological Properties at M. Mizoguchi, H. Hamada, U.the Interface of Film Insert Injection Molded S. Ishiaku and T. TsujiiPolypropylene-Film/Polypropylene Matrix,Polymer Engineering and Science, 44,12,2327-2334 Subject, etc. Author Publisher Year / MonthImpact and Compression-After-Impact O. A. Khondker, K. H. Leong, 2005.04Performance of Weft-Knitted Glass Textile I. Herszberg, H. HamadaComposites, Composites PartA:AppliedScience and Manufacturing, , 36 ,638-648Effect of the Braiding angle on the Energy M. Okano, K. Sugimoto, H 2005.02Absorption Properties of a Hybrid braided Saito, A. Nakai, and H.FRP Tube, Journal of Materials: Design and HamadaApplications, 219 1,59-66Tensile Strength and Fiber/Matrix Interfacial Hiroshi Hatta, Ken 2005.05Properties of 2D -and 3D-carbon/Carbon Goto,Shinya Ikegaki, ItaruComposites, Journal of the European Kawahara, Mohamed S.Aly-Ceramic Society, Vol.25,No.4,P535-542 Hassan, Hiroyuki HamadaMicrostructure and Fracture Behavior of S. Solomon, A. Abu Bakar, Z. 2005.08(Co)Injection-Molded Polyamide 6 A. Mohd Ishak, U. S. Ishiaku,Composites with Short Glass/Carbon Fiber Hiroyuki Hamada
  12. 12. Hybrid Reinforcement, Journal of AppliedPolymer Science, vol.97,No.3,P957-967The Effect of Ambient Moisture and U. S. Ishiaku, H. Hamada, M. 2005.04Temperature Conditions on the Mechanical Mizoguchi, W. S. Chow, Z. A.Properties of Glass Fiber/Carbon Fiber/Nylon Mohd Ishak6 Sandwich Hybrid Composite Consisting ofSkin-Core Morphologies, PolymerComposites 2005, ,A New Evaluation Method of Adhesion Naoto Ikegawa, Hiroyuki Design and 2000.03between Glass/Epoxy Composite Substrate Hamada and Masahiro Manufacturinand Copper Foil for Multilayer Circuit Board Yamanouchi g ofApplications, Design and Manufacturing of CompositesComposites, 3, , 37-42Evaluation of Adhesion between Masahiro Yamanouchi, 2000.03Glass/Epoxy Composites and Copper Foils Hiroyuki Hamada, Naotoof Printed Circuit Board using a Fracture- Ikegawa, Mikio Masui,mechanics Approach, Design and Kimiaki Nakata and KeijiManufacturing of Composites, 3, ,43-48 HigashiEnergy Absorption Performances and Ryuji Inai, Hiroshi Saito, Koji 2000.03Fracture Mechanisms of Braided Kameo, Tadashi Uozumi,Pultruded Composite Rods, Design and Masaharu Iwamoto, HiroyukiManufacturing of Composites, 3, ,83-87 Hamada Subject, etc. Author Publisher Year / MonthLongitudinal Compressive Strengths in Pan- N. Oya, D. J. Johnson and H. 2000.03Based Carbon Fibers,, Design and HamadaManufacturing of Composites, 3, ,97-104Fractography of Mode I Crack Propagation in Machiko Maeda, Y.Ma, 2000.03Glass Cloth/Vinylester Composite, Design K.Inomata, Kazuo Kitagawa,and Manufacturing of Composites, 3, ,164- Yoshimichi Fujii, Hiroyuki
  13. 13. 168 HamadaEnergy Absorption Properties of Composite, Hiroshi Saito, Ryuji Inai, Koji 2000.03Design and Manufacturing of Composites, Kameo, Hiroyuki Hamada3, ,198-202Numerical Optimum Method for Injection A. Takafuji, T. Kubo, A. 2000.03Molding Considering Design Information, Yokoyama, H. HamadaDesign and Manufacturing of Composites,3, ,325-329Development of Textile Composites Yasutomo Uesuji, Hiroyuki 2000.03Impregnated with Dicyclopentadiene Resin, Hamada, Toshiko Osada,Design and Manufacturing of Composites, Kazuo Kitagawa, Asami Nakai,3, ,375-380 Nobuo TakedaMechanical Properties of in-situ Fiber Takeshi Semba, Kazuo 2000.03Reinforced Composites form Blends Kitagawa and HiroyukiContaining Polyethylene with Poly- Hamadacaprolactam, Design and Manufacturing ofComposites, 3, ,395-399Potentiality of Continuous Fiber Reinforced Koji Kameo, Georg Bechtold, 2000.03Thermoplastic Composites, Design and Hiroyuki Hamada and KlausManufacturing of Composites, 3, , 408-412 FriedrichStudy on in-situ Fiber Reinforced T. Semba and K. Kitagawa, H. 2002.04Composites: Polyolefin/Polycaprolactone HamadaBlend, Design and Manufacturing ofComposites, 4, ,176-183Study on in-situ Fiber Reinforced T. Semba and K. Kitagawa, H. 2002.04Composites: Polyolefin/Polycaprolactone HamadaBlend, Design and Manufacturing ofComposites, 4, ,176-183Void Evaluation of Polyurethane foam Akihiro Goto,Kazumi 2002.04Materials by Image Processing Technology, Yamaguchi and HiroyuiDesign and Manufacturing of Composites, Hamada
  14. 14. 4, ,192-196 Subject, etc. Author Publisher Year / MonthFiber Orientation and Mechanical Properties Akihiro Fujita and Fuiaki Baba, 2002.04of Injection Molded CF/LCP Thin Plates, Chmyon Gon, DaisukeDesign and Manufacturing of Composites, Watanabe, Asami Nakai,4, ,197-204 Hiroyuki HamadaMicroscopic Observation of Initial Fracture Toshiko Osada, Asami Nakai, 2002.09in Textile Composites, Design and Hiroyuki HamadaManufacturing of Composites, 4, ,205-212Fabrication and Mechanical Property of Long Asami Nakai, Hiroyuki 2002.09Fiber Reinforced Thermoplastic Composites Hamada, Dai Nakaamiusing Braiding Technique, Design andManufacturing of Composites, 4, ,221-228Fabrication and Mechanical Properties of Asami Nakai, Hiroyuki 2002.09Textile Reinforced SMC, Design and Hamada, Takeshi OhkawaManufacturing of Composites, 4, ,229-236Environmental Effects on E-Glass and C- Toru Morii, Hiroyuki Hamada, 2002.09Glass Fiber Reinforced Vinylester Machiko Mizoguchi.Composites, Design and Manufacturing of Yoshimichi FujiiComposites, 4, ,429-436The Effect of Heat Sealing Temperature on Tetsuya Tsujii, U. S. Ishiaku, 2005.12the Properties of OPP/CPP Heat Machiko Mizoguchi, HiroyukiSeal.I.Mechanical Properties, Journal of HamadaApplied Polymer Science, Vol.97,No.3,P753-760Axial Crushing Performance of Braided Masanori Okano, Asami Nakai, 2005.05Composite Tubes, International Journal of Hiroyuki Hamada
  15. 15. Crashworthiness, 10,3,287-293The Effect of Crosslinking on the Mechanical Takeshi Semba, Kazuo 2005.04Properties of PLA/PCL Blend, Proceeding of Kitagawa,Umaru Semo IshiakuAnnual Technical Conference on Society of and Hiroyuki HamadaPlastic Engineers 2005, 2423-2427Mechanical Properties of Textile-inserted Omar A. Khondker, Xinyu 2005.05PP/PP Knitted Composites., Annual Yang , Nobuhiro Usui, AsamiTechnical Conference on Society of Plastic Nakai1 and Hiroyuki HamadaEngineers 2005, 1554-1558Effect of Heat Sealing Temperature on the U. S. Ishiaku, Yasuo 2005.05Fracture Aspects of OPP/CPP Seal., Hashimoto, Tsujii Tetsuya,Proceeding of Annual Technical Conference Hiroyuki Hamadaon Society of Plastic Engineers 2005, 1075-1079 Subject, etc. Author Publisher Year / MonthProperties of Injection Molded Amorphous Takayuki Inuzuka, Akihiro 2005.04Polymer for Punching., Proceeding of Annual Fujita, Asami Nakai, HiroyukiTechnical Conference on Society of Plastic HamadaEngineers 2005, 1871-1875Cellular Anisotropy in Mechanical Properties Akihiko Goto, Kazumi 2005.05of Polyurethane Foam., Proceeding of Yamaguchi, Umaru S. IshiakuAnnual Technical Conference on Society of & Hiroyuki HamadaPlastic Engineers 2005, 1780-1783Analysis of Interface of Two Layer Molded Shingo Asai, Shinichi 2005.05Product by Simultaneous Composite Hadehara and HiroyukiInjection Molding., Proceeding of Annual HamadaTechnical Conference on Society of PlasticEngineers 2005, 2208-2212Evaluation of Adjacent Flow Weldline in Koji Yamada, Kiyotaka 2005.05
  16. 16. PC/ABS., Proceeding of Annual Technical Tomari, Satoko Baba, UmaruConference on Society of Plastic Engineers Semo Ishiaku, Hiroyuki2005, 791-795 HamadaHygrothermal Aging of Recycled-PET Y. W. Leong, X. Yang, S. 2005.05Sandwich Injection Moldings., Proceeding of Nagata, N. Kunimune, H.Annual Technical Conference on Society of HamadaPlastic Engineers 2005, 3200-3203Hygrothermal Aging of Glass and Carbon Y. W. Leong, U. S. Ishiaku, H. 2005.05Fiber Reinforced Nylon 6 Sandwich Injection HamadaMoldings., Annual Technical Conference onSociety of Plastic Engineers 2005, 1509-1513Mechanical Properties of Square Braided Takahisa Ueda, Akio Ohtani, 2002.11Fabric, Proceedings of ASME International Asami Nakai, HiroyukiMechanical Engineering Congress & HamadaExposition, 1-5Fabrication and Mechanical Properties Omar A. Khondker, Umaru S. 2005.04of Unidirectional Jute/PP Composites Using Ishiaku, Asami Nakai andJute Yarns by Film Stacking Method, Journal Hiroyuki Hamadaof Polymers and the Environment, 13,2,115-126Fracture Toughness Evaluation of Adjacent Koji Yamada,Kiyotaka Tomari, 2005.04Flow Weld Line in Polystyrene by the SENB Umaru Semo Ishiaku,HiroyukiMethod, Polymer Engineering Science, Hamada45,8,1059-1066 Subject, etc. Author Publisher Year / MonthCharacterization of Knitted Fabric Xinyu Yang, Nobuhiro Usui, 2006.05Reinforced PP/PP and GF/PP Composites, Takeo Kitayama, Shigeyoshi,Proceeding of Annual Technical Conference Matubara, Asami Nakai andon Society of Plastic Engineers 2006, 5-9 Hiroyuki Hamada
  17. 17. Effect of Molecular Weight on the Interfacial H. Okumura, R. Yoshida, U. S. 2006.05Properties of GF/PP Injection Molded Ishiaku, A. Nakai, H. HamadaComposites, Annual Technical Conferenceon Society of Plastic Engineers 2006, 173-177Mechanical Properties of PP/PA/GF Naoyuki Kawai, Asami Nakai, 2006.05Blend Thermoplastics, Proceeding of Annual Hiroyuki Hamada, HiroshiTechnical Conference on Society of Plastic YasudaEngineers 2006, 182-185Fracture Characteristics of CF and GF S. Solomon,Y. W. Leong, Z. A. 2006.05Reinforced PA6 Sandwich Moldings, Mohd, U. S. Ishiaku, H.Proceeding of Annual Technical Conference Hamadaon Society of Plastic Engineers 2006, 680-684Interfacial Characteristics in Film Insert Y. W. Leong, S. Yamaguchi, 2006.05Molded PC/ABS and PC Film, Proceeding of U. S. Ishiaku, H. HamadaAnnual Technical Conference on Society ofPlastic Engineers 2006, 741-745Evaluation of Weldline in Polycarbonate by Koji Yamada, Kiyotaka 2006.05Laser Raman Spectroscopy, Annual Tomari, Umaru Semo Ishiaku,Technical Conference on Society of Plastic Hiroyuki HamadaEngineers 2006, 1108-1112Effect of Specimen Thickness on PC/ABS N. O-Charone, S. Pivsa-Art, Y. 2006.05Spiral Flow Injection Mo dings, W. Leong, K. Umemura, M.Annual Technical Conference on Society of Kotaki, H. Hamada, ShigeyoshiPlastic Engineers 2006, 1123-1127 Matubara, Asami Nakai and Hiroyuki HamadaIn Mold Punching -Processing and Takayuki Inuzuka, Akihiro 2006.05Mechanical Properties, Annual Technical Fujita, Asami Nakai, HiroyukiConference on Society of Plastic Engineers Hamada2006, 1205-1209
  18. 18. Numerical Simulation and Experimental Shigeo Tanaka, Kensuke Taira, 2006.05Study on Metal Injection Molding, Annual Kenji Okubo, Hiroshi Ito,Technical Conference on Society of Plastic Hiroyuki HamadaEngineers 2006, 1220-1224 Subject, etc. Author Publisher Year / MonthInterfacial Characteristics in Film Insert Y. W. Leong, S. Yamaguchi, 2006.05Molded PC/ABS and PC Film, Proceeding of U. S. Ishiaku, H. HamadaAnnual Technical Conference on Society ofPlastic Engineers 2006, 741-745Influence of Compounding Conditions on Noriaki Kunimune, Hiroyuki 2006.05Mechanical Properties of Recycled Inoya, Shigeyuki Nagata,Poly(Ethylene Terephthalate , Annual Kazushi Yamada, MasayaTechnical Conference on Society of Plastic Kotaki and Hiroyuki HamadaEngineers 2006, 1455-1458Impact Properties of Recycled PET Prepared Noriaki Kunimune, Hiroyuki 2006.05by Reactive Compounding, Annual Technical Inoya, Shigeyuki Nagata,Conference on Society of Plastic Engineers Kazushi Yamada, Masaya2006, 1459-1462 Kotaki and Hiroyuki HamadaInfluence of PC-oligomer Content in Sungeon Kim, Kazutoshi 2006.05PC/ABS Blend Injection Moldings, Annual Umemura, Toshihiro Yoshida,Technical Conference on Society of Plastic Masaya Kotaki and HiroyukiEngineers 2006, 2150-2153 HamadaEffect of Compounding Procedure on Takeshi Senba, Kazuo 2006.05Mechanical Properties of PLA/PCL Blends, Kitagawa, Umaru SemoAnnual Technical Conference on Society of Ishiaku and Hiroyuki HamadaPlastic Engineers 2006, 2159-2163Effect of Heat-Sealing Temperature and Yasuo Hashimoto, Tsujii 2006.05Holding Time on Mechanical Properties of Tetsuya, Kitagawa Kazuo,Heat-Sealed Poly(Lactic Acid)Films, Annual Machiko Mizoguchi, YasuhiroTechnical Conference on Society of Plastic Fujita, Hiroyuki Hamada,
  19. 19. Engineers 2006, 2221-2225 Umaru.S.IshiakuFracture Behavior of Heat-Sealed Reiichi Konishi, Yasuo 2006.05Poly(Lactic Acid) Films, Annual Technical Hashimoto, Yumi Hashimoto,Conference on Society of Plastic Engineers Masanori Anan, Tetsuya Tsujii,2006, 2231-2235 Mitsuhiko Morimoto, Kazuo Kitagawa, Umaru S. Ishiaku, Masaya Kotaki and Hiroyuki HamadaFabrication of Composite Pipe with Recycled Masanori Anan Takahiro 2006.05Polycarbonate and Crushed FRP Products, Okamoto, Hiroaki Okumura,Annual Technical Conference on Society of Asami Nakai and HiroyukiPlastic Engineers 2006, 2501-2505 Hamada Subject, etc. Author Publisher Year / MonthReplication of Injection Molded Parts with Osamu Murakami, Kazushi 2006.05Micro-Scale Features, Annual Technical Yamada, Masaya Kotaki andConference on Society of Plastic Engineers Hiroyuki Hamada,2006, 2526-2530Mechanical Properties of Foamed PP Sheet, Yasuhiro Nishikawa, Xinyu 2006.05Annual Technical Conference on Society of Yang Seiichiro Hisaka, AsamiPlastic Engineers 2006, 2765-2769 Nakai, Hiroyuki HamadaPrediction of Modulus by Considering Kazumi Yamaguchi, Akihiro 2006.05Distribution of Cell Shape, Annual Technical Goto, Umaru Semo Ishiaku,Conference on Society of Plastic Engineers Hiroyuki Hamada2006, 2795-2798Hygrothermal Ageing of GF/PP Injection T. Yoshida, H. Okumura, A. 2006.05Molded Composites, Annual Technical Nakai, U. S. Ishiaku, H.Conference on Society of Plastic Engineers Hamada2006, 178-181Fracture Behavior of Heat-Sealed PP Films Yasuhiro Nishikawa,Yasuhiro 2006.05
  20. 20. under Static and Creep Loadings, Annual Fujita, Sommai Pivsa-ArtTechnical Conference on Society of Plastic Asami Nakai,MasayaEngineers 2006, 2226-2230 Kotaki,Hiroyuki HamadaEffect of Surface Treatment on Mechanical Yasuhiro Nishikawa, Asami 2006.05Properties of GF/Phenol Composite, Annual Nakai, Hiroyuki Hamada,Technical Conference on Society of Plastic Takeshi Okayama, Naoki Uota,Engineers 2006, 2811-2815 Yasunari KurataniThe Effect of Crosslinking on the Mechanical Takeshi Semba, Kazuo 2006.05Properties of Polylactic Acid/ Kitagawa, Umaru SemoPolycaprolactone Blends, Journal of Applied Ishiaku, Hiroyuki HamadaPolymer Science, 101, ,1816-1825The Effect of Molecular Weight on the T. Yoshida, U. S. Ishiaku, H. 2006.05Interfacial Properties of GF/PP Injection Okumura, S. Baba, H. HamadaMolded Composites, Composites Part A,37, , 2300-2306Jute-Polyester and Jute-Epoxy Composites-A S. Sahoo, U. S. Ishiaku, A. 2006.08Comparative Analysis, Design, Nakai, H. HamadaManufacturing and Applications ofComposites, 22-30Mechanical Properties of CF/GF Fiber Tomohiko Sugie, Asami Nakai, 2006.08Hybrid Multi-axial Warp Knitted Fabric Hiroyuki Hamada, AkiraEpoxy Composite Materials, Design, KasuyaManufacturing and Applications ofComposites, 160-167 Subject, etc. Author Publisher Year / MonthEffect of Resins on Crack Propagation of Y. Takai, N. Kawai, A. Nakai, 2006.08Long-Fiber Reinforced Thermoplastic H. HamadaComposites, Design, Manufacturing andApplications of Composites, 196-201
  21. 21. Mechanical Performance of Composite with Hisashi Mizuno, Kenichi 2006.08L-Joint, Design, Manufacturing and Sugimoto, Asami Nakai,Applications of Composites, 286-294 Hiroyuki HamadaFuture-applied Conventional Technology, H. Hamada, A. Nakai, Naokazu 2006.08Engineering and Science, Design, MiyamotoManufacturing and Applications ofComposites, 297-299Degradation Behavior of Natural Fiber Filled S. Toyoyama, S. Sahoo, M. 2006.08Composites, Design, Manufacturing and Kotaki, A. Nakai, U. S. IshiakuApplications of Composites, 300-304 H. HamadaProposal of Design Method for GFRP Pipe E. Kitagawa, A. Nakai, H. 2006.08using SMC, Design, Manufacturing and HamadaApplications of Composites, 336-342Nondestructive Inspection Using Ultrasonic K. Sugimoto, Y. Fujii, A. 2006.08of Degraded GFRP, Design, Manufacturing Nakai, H. Hamadaand Applications of Composites, 423-431Sandwich Injection Molding of Yuji Fujita, Toshihiro Yosida, 2007.05Polypropylene and Biodegradable Polymer, Hironari Sano, Masaya Kotaki,Proceeding of Annual Technical Conference Hiroyuki Hamadaon Society of Plastic Engineers 2007, 2375-2377Distribution of Minor Phase Components and Y. W. Leong, H. Hamada 2007.05Its Influence on the Film-Substrate Interfacein Film Insert Moldings, Proceeding ofAnnual Technical Conference on Society ofPlastic Engineers 2007, 752-759Evaluation of Oriented Polypropylene/Cast Yumi Hashimoto, Yasuo 2007.05Polypropylene Film at the Heat-Sealing Part Hashimoto, Yew Wei Leong,and the Edge, Proceeding of Annual Kazushi Yamada, HiroyukiTechnical Conference on Society of Plastic HamadaEngineers 2007, 1010-1013
  22. 22. Subject, etc. Author Publisher Year / MonthEffect of Cell Shape on Mechanical Kazumi Yamaguchi, Akihiro 2007.05Properties of Polyurethane Foams Molded Goto, Asami Nakai, Hiroyukiunder Several Conditions, Proceeding of HamadaAnnual Technical Conference on Society ofPlastic Engineers 2007, 1483-1487Mechanical Properties and Morphology of Yuka Kobayashi,Yew Wei 2007.05PMMA Grafted Silica/PMMA Injection Leong, Makoto Sarata,Molded Composites, Proceeding of Annual Hiroyuki Hamada, KazushiTechnical Conference on Society of Plastic Yamada, Masaya Kotaki, KohjiEngineers 2007, 2000-2004 Yoshinaga, Hiroyuki Karakawa, Hiroshi Ito, Kunihiko Kazama, Takeshi KikutaniEffect of Molding Conditions on Morphology T. Ohta, Y. W. Leong, K. 2007.05and Structure of Recycled-Pet, Proceeding of Yamada, H. HamadaAnnual Technical Conference on Society ofPlastic Engineers 2007, 2272-2275Hierarchical Structure Developed in PC/ABS N. O-Charoen, Y. W. Leong, 2007.05Closed Spiral Flow Injection Molding, M. Kotaki, H. HamadaProceeding of Annual Technical Conferenceon Society of Plastic Engineers 2007, 2375-2377Dynamic Mechanical, Thermal and Fracture T. Uemura, S. Kim, Y. W. 2007.05Toughness Properties of PC/ABS Blend Leong, O. B. Ogazi, K.System with Incorporation of PC-Oligomer, Yamada, H. HamadaAnnual Technical Conference on Society of
  23. 23. Plastic Engineers 2007, 2370-2374 Effect of Fiber Content and Alkali treatment U. S. Ishiaku, X. Y. Yang, Y. 2007.04 on the Mechanical and Morphological W. Leong, H. Hamada, T. Properties of Poly(lactic Semba, K. Kitagawa acid)/Poly(caprolactone)Blend jute Fiber- Filled Biodegradable Composites, Journal of Biobased Materials and Bioenergy, 1,1,78-865) ผลงานทางสังคม 2000 : Chairman 3rd joint Canada-Japan Workshop on Composites 1998 : Chairman 4th International Symposium of TEXCOMP 1998 : Organizing Committee 14th Polmer Processing Society(PPS) 1997 : Best Paper Award (two Papers) of the Composite Institute USA 1966 : Best Paper Award of Japan Reinforced Plastic Society 1995 : Best Paper Award of the Society of Fiber Science and Technology Japan 1993 : Best Paper Award of Japan Society of Polymer processing 1992 : Hayashi Award of The Japan society for Composite Materials 1991 : Best Paper Award of Japan Reinforced Plastic Society 1988 : Technical Award of Textile Machinery Society of Japan 1986 : Best Paper Award of The Society of Materials Science Japan.
  24. 24. 6) ความรวมมือกับมหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี - ทําหนาที่อาจารยที่ปรึกษาระดับปริญญาเอกใหกับ ดร.ณรงคชย โอเจริญ ภาควิชาวิศวกรรมวัสดุและโลหการ ั คณะวิศวกรรมศาสตร มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรี, 2005. - ทําหนาที่อาจารยที่ปรึกษาใหกบ ดร.สุภาพร ทุมสอน, ภาควิชาวิศวกรรมสิ่งทอ คณะวิศวกรรมศาสตร ั มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรีจบการศึกษาป 2008. - อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 8-9 ตุลาคม 2009 (รูปภาพประกอบที่ 1) - Chairman 2nd Rajamangala University of Technology International Conference, “Science and Technology Development in Creative Economy”, Convention Center, Chulaborn Research Institute, Bangkok, Thailand : 24-26 November 2010. (รูปภาพประกอบที่ 2) - อาจารยพิเศษสอนหัวขอเรื่อง ”Polymer Composites” ระหวางวันที่ 15-17 ตุลาคม 2010 (รูปภาพประกอบ 3) - ทําหนาที่อาจารยที่ปรึกษาใหกับ นายอนินท มีมนต, ภาควิชาวิศวกรรมอุตสาหการ คณะวิศวกรรมศาสตร มหาวิทยาลัยเทคโนโลยีราชมงคลธัญบุรีจบการศึกษาป 2011.
  25. 25. รูปที่ 1 Prof. Hiroyuki HAMADA สอนหัวขอ “Polymer composites”, 2009
  26. 26. รูปที่ 2 Prof. Hiroyuki HAMADA เขารวมงาน Rajamangala University of Technology International Conference,“Science and Technology Development in Creative Economy”, Convention Center, Chulaborn Research Institute,
  27. 27. Bangkok, Thailand : 24-26 November 2010
  28. 28. รูปที่ 3 Prof. Hiroyuki HAMADA สอนหัวขอ “Polymer composites”, 2010

×