Swimming pool pump motors

114 views
83 views

Published on

Swimming pool pump motors are the important components in running a swimming pool. They make a big factor in ascertaining that it is properly filtered and take on the job of removing debris from the water. This is a continuous work done by chemical distribution. It works closely to ascertain the pool water is safe, clean and inviting.

Published in: Self Improvement
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
114
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Swimming pool pump motors

  1. 1. Easy Way To Keep Your Pool CleanSwimming pool pump motors are the important components in running a swimming pool. Theymake a big factor in ascertaining that it is properly filtered and take on the job of removingdebris from the water. This is a continuous work done by chemical distribution. It works closelyto ascertain the pool water is safe, clean and inviting.Pool pumps play a vital role in maintaining swimming pools. Hence, it is essential to install poolpump motors of good quality. Pool pumps and motors should be the best and requires a carefulpurchase. The pumps in and above grounds have respective sets of requirements.These pumps come in different sizes and qualities. This may seem confusing while walking intoa pool supply store as you see different products and chemicals. However, owning a pool impliesone need to know easy ways of keeping the pool clean.The basic thing to concentrate is pH and alkalinity to ensure proper water maintenance. pH is forhydrogen potential and power of hydrogen. The lower the pH, higher is the acidic in water andhigher the pH, more is the alkalinity. The pH levels need to be between 7.2 to 7.6 and this can bealtered owing to decomposing leaves, acidic rain, neglecting and grass.Alkalinity describes balance and buffering capacity. This is not identical to pH as it regulates themetal contents and pH levels. Water having low alkalinity level is susceptible to pH changes andthe water with high alkalinity levels easily resists pH level changes. The alkalinity ideal readingmust be between 80 to 150ppm.The chemicals required to keep the pool clean includes: Chlorine Shock pH increase(Sodium Carbonate) pH decrease( Sodium bisulfate) Algaecide Filter should be clean with Psi reading as 10-12psi. If the reading lacks, you need to clean the filter and check the filter hoses for leaks as these impede the filters. Know the number of gallons your pool holds. This is essential to treat it. Buy a start up kit of chemicals and follow the directions. However, wear eye protection and rubber gloves. Circulate chemicals for 16-24 hours and test water with test kit. Ensure the chlorine test levels are within 3.0 ppm. Add chlorine 3-4 times to the pool. After rains, add chlorine. Keep the pool covered, if not in use. Use leaf guard or skim net to clean grass, bugs and leaves from the surface. In case the water is milky, drain the pool and the fill it. Vacuum thrice a week.

×