Good Stuff Happens in 1:1 Meetings: Why you need them and how to do them well
Newt fencing aims to protect endangered species called great crested newt
1. Newt Fencing Aims To Protect Endangered Species Called Great Crested Newt
What is Newt Fencing?
Fencing as is known is done to protect both the sides of it. In the same way, Newt fencing also is
meant to prohibit the newt or Great Crested Newt as they are known from entering into the area
which is for reserved for human activities. The fencing is also known as drift fencing or temporary
amphibian fencing (TAF). Mostly, it is used where projects are being built up and there is a
possibility of harm to protected species. While doing this, low fence of plastic sheet is buried a bit
in the ground and it is being supported by light weight posts of wood or plastic so that plastic does
not fly away with the wind or suffers any type of damage.
It is used to keep animals out of working areas, to keep them inside safe areas of their habitat, to
intercept migration routes, or to control their movement to help their capture for trans location.
Why it is done?
Following are some of the reasons why environmental engineers advise to go for Newt fencing:
To keep the animals out of working areas
To keep them inside safe areas of their habitat
To intercept migration routes
To control their movement so that translocation can be easier
To make sure Great Crested Newts are not killed or injured at the cost of human development
activities
Hence, in order to fulfill these purposes, it is necessary that you hire a professional ecological
consultant or environmental engineers who have the license to set up the Newt fencing or capture
the animals as the Great Crested Newt is a European strictly protected fauna species.
How it is done?
The Natural England/English Nature Great Crested Newt Mitigation Guidelines have some exact
specifications for erecting Newt Fencing. Let us explore them all:
Great Crested Newt should be protected by a barrier fence which is based on on partially buried
polythene membrane. The exposed part of this fencing is supported by timber stakes.
The environmental engineers should select a UV stabilized material to extend its life. The
guidelines say that it should at least last for two years.
Timber stakes, usually 37x37 or 50x50mm and from 1000 to 1200mm in length are driven into
the ground along the inside line of the fence.
Now, the spacing of these stakes is almost 1500mm and it is done in such a way as to minimize
Great Crested Newt's desire to escape and go out.
Another thing to take into consideration for environmental engineers is that the polythene
membrane need to be attached only to the stakes using screws, nails or staples through a plastic
washer of approx. 20-25mm in diameter.
Such fixing should be minimum three per post.
While creating Newt fencing, the top edge of the membrane needs to be rolled over with the
plastic over two or three times to create a 'tube' along the top of the membrane. The top fixing
should be through this roll.
Hence, this type of Newt fencing undertaken with the help of environmental engineers to protect
Great Crest Newt is a very secure and safe type of fencing where the species are prevented from
climbing over the fence.