MIS 2014

1,425 views
1,067 views

Published on

Published in: Business, Health & Medicine
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
1,425
On SlideShare
0
From Embeds
0
Number of Embeds
16
Actions
Shares
0
Downloads
14
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

MIS 2014

  1. 1. MC-CIH06 REV.11 Internal Hexagon Product Catalog, 2014 Internal Hexagon Product Catalog, 2014 To learn more about M IS visit our website : www.mis-implants.com or scan the QR Code
  2. 2. MIS’ Quality System complies with international quality standards: ISO 13485:2003 - Quality Management System for Medical Devices, ISO 9001: 2008 – Quality Management System and CE Directive for Medical Devices 93/42/EEC. MIS’s products are cleared for marketing in the USA and CE approved. All rights reserved. No part of this publication may be reproduced, transcribed, stored in an electronic retrieval system, translated into any language or computer language, or be transmitted in any form whatsoever, without the prior written consent of the publisher. Warning: Only a licensed dentist should use these products.
  3. 3. MIS Implants Technologies Ltd. is a dynamic, rapidly growing, research, production and marketing company, specialized in MIS offers technicians a range of innovative the development and manufacturing of advanced solutions for tools that ease and simplify lab work, and dental implantology. The MIS mission in every case. help reach higher accuracy is to simplify dental implantology, by offering creative solutions, for a better quality of life. © MIS Corporation. All Rights Reserved.
  4. 4. 4. Table of Contents Implant System ImplantsSystems SEVEN 8 - 15 M4 16-23 24 Implant Insertion Tools UNO 25-28 LINK 29 Packaging 30 Implant Label Colors 31 Instruments Surgical Instruments Pilot Drills - External Irrigation - SEVEN 34 35 Twist Drills - External Irrigation- SEVEN 36 Pilot Drills - External Irrigation - M4 Twist Drills - External Irrigation- M4 37 38-39 Short Twist Drills - External Irrigation SEVEN & M4 Procedure 40-41 Twist Drills - Internal Irrigation SEVEN & M4 Procedure Marking Drills & Countersinks 42 43 Trephine Burs Ceramic Drills - External Irrigation 43 44 Surgical Tools - UNO Surgical Tools 45-46 47 Prosthetic hex. driver Surgical Instruments 48 Torque Ratchet Kit 49 Kits SEVEN Advanced Surgical Kit 52-53 M4 Advanced Surgical Kit 54-55 M4 Drilling Set 56 Yeung Bone Harvest Kit 57 SEVEN Standard Platform Stoppers Kit 58 59 SEVEN Drill Stoppers Kits - Depth-Based Abrahami Drill Guide Kit 60-61 Bone Compression Kit 62-63 UNO Implant Surgical Kit 64-65 66-67 Prosthetic Tools Kit Sinus Lift Osteotomes Set 68 Convex Osteotomes Set 69 MIS Manuals Kits 70-71 Accessories Prosthetic Options Narrow Platform Analog and Impression Copings NPK - Narrow Prosthetic Kits Direct, Screw Retained Restoration Options Cemented Restoration Options Ti Base Kit - Single Tooth Restoration Ti Base Kit - Multi Unit Restoration OT Equator KIts Zirconia Abutment Kits Ball Attachment System Locator Attachment System 6-31 32-49 50-71 Kits 72-130 73 74-75 76 77 78 79 80-81 82-83 84 85-86 Standard Platform Analogs and Impression Coping 87 CPK - Complete Prosthetic Kit 88-89 Direct, Screw Retained Restoration Options 90 91 Cemented Restoration Options Direct, Cemented Restoration Options 92-93
  5. 5. Ti Base Kit - Single Tooth Restoration Ti Base Kit - Multi-Unit Restoration OT Equator Kits Zirconia Abutment Kits Multi-Unit System Multi-Unit Angulated Ball Attachments Angulated Ball Attachments Locator Attachment System 94 95 96-97 98-101 102-103 104 105 106-107 108-109 Wide Platform Analog and Impression Copings 110-111 CPK - Complete Prosthetic Kit 112-113 Direct, Screw Retained Restoration Options 114 Cemented Restoration Options 115 Direct, Cemented Restoration Options 116-117 Ti Base Kit - Single Tooth Restoration 118 Ti Base Kit - Multi-Unit Restoration 119 OT Equator Kits 120-121 Zirconia Abutment Kits 122-123 Multi-Unit System 124-125 Ball Attachment System 126-127 Locator Attachment System 128-129 Bars - Reconstruction System Accessories 131-149 Bone Augmentation Materials 150-159 Appendix 160-167 Index 168-188 130 Prosthetic Instruments 132-134 135 Zircon Diamond Burr Set 136-137 Prosthetic Planning Kit MCU Control Unit 138-139 Crown Set 140 141 Abutment Holding System Kit Prosthetic ntroduction Case I 142-143 MGUIDE Surgical Kit 144-149 4BONE® XBM - Bovine Bone Matrix 4BONE® BCH - Synthetic Bone Substitute BONDBONE® - Bonding Graft Material RCB-Resorbable Conforming Barrier Membrane RSB-Resorbable Collagen Barrier Membrane RCM - Resorbable Collagen Membrane 4BONE® TAPE - Wound Dressings 4BONE® PLUG - Wound Dressings 152 153 154 155 156 157 158 159 Alloy Compositions Restorative Components Diameter and Platform Color Coding Label Description MIS Manuals - Symbol Index 162 163 164 165 166-167 Index 169-188
  6. 6. 6.
  7. 7. Implant Systems. MIS proudly offers a wide range of implant systems, providing simple solutions for all clinical scenarios, from the basic to the most complex. Each and every implant design is based on long history of research and development. All implants are made of biocompatible, medical grade, Titanium Alloy. The surface of all MIS implants is roughened by both sand blasting and acid-etching, promoting long lasting osseointegration. MIS adheres to the most stringent international quality standards, complying with ISO 13485: 2003 Quality Management System for Medical Devices. Products that appear in this catalog are CE approved and FDA cleared for marketing. MIS SEVEN self-tapping implants are designed for a wide range of bone types and bone augmentation procedures. Their unique geometric design features dual threads, three spiral channels stemming from the apex, micro-rings on the implant neck and a large pitch thread design. Following our commitment to Make It Simple, MIS was the first company to include a sterile, single-use final drill with each and every SEVEN implant, to ensure a safer and more accurate drilling procedure. MIS M4 implants combine a cylindrical and conical body shape with V-shaped threads. It is designed for either two-stage or single-stage surgical procedures. The cylindrical shape provides excellent primary stability. The self-tapping thread design, three spiral channels and flat cutting apex, make M4 implants the ideal choice for use in dense bone. UNO One Piece implants are mainly indicated for the restoration of narrow ridges and tight spaces, where augmentation is either contraindicated or not feasible. Specific indications may include single or multiple missing teeth in the anterior mandibular area and restoration of maxillary lateral incisors. Thanks to their advanced double-thread geometry and recognized surface technology, UNO implants allow for a quick and effortless placement and long lasting osseointegration.
  8. 8. 8. NARROW ® Screw type implants range Narrow Platform 6mm Length 8mm 10mm 11.50mm 13mm 16mm MF7-13330 MF7-16330 Type MF7-10330 MF7-11330 Ø3.30 mm Surgical tools (For more information please refer to page no. 45-46) MT-HLI10 Long insertion tool, int. hex. connection MT-HSI10 Short insertion tool, int. hex. connection MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP Implant cover screw healing caps Available for heights: 2,3,4,6,8mm Ø 4mm 2/3/4/6/8mm MC1-00330 MH-N2330 MH-N3330 MH-N4330 MH-N6330 MH-N8330  Ø 4.3mm 2/3/4/5/6 MH-52330 MH-53330 MH-54330 MH-55330 MH-56330
  9. 9. ® Ø3.30mm Narrow Platform Dimensions Catalog No. Ø 3.30mm length 10mm MF7-10330 SEVEN internal hex. implant Ø 3.30mm length 11.50mm MF7-11330 NARROW MF7-13330 Sand Blasted and Acid-Etched Ø 3.30mm length 13mm MF7-16330 Titanium Alloy Ti 6Al 4V ELI Ø 3.30mm length 16mm 2.10 Ø 3.30 Ø 3.20 L Final Drill Ø 2.20 Ø 2.40 A specially designed final drill for 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing a for an easier and safer drilling procedure. Ø3.30mm Implant Procedure Drilling Speed (RPM) 12001500 Diameter Ø1.90 Ø2.40 200400 9001200 Ø2.40 15-25 Ø2.20 Ø3.20 Ø3.30 Final drill For bone type 12 Do not use the final drill for bone types 34 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  10. 10. 10. STANDARD ® Screw type implants range Standard Platform 6mm 8mm 10mm MF7-08375 Length 11.50mm MF7-10375 13mm 16mm MF7-13375 MF7-16375 Surgical tools Type MF7-11375 (For more information please refer to page no. 45-46) Ø 3.75 mm MT-HLI10 Long insertion tool, int. hex. connection MF7-06420 MF7-08420 MF7-10420 MF7-11420 MF7-13420 MT-HSI10 MF7-16420 Short insertion tool, int. hex. connection Ø 4.20 mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Implant cover screw healing caps Available for heights: 3,4,5,6mm MC1-00375  Ø 4mm 3/4/5/6mm  Ø 5.5mm 3/4/5/6mm MH-03375 MH-04375 MH-05375 MH-06375 MH-53375 MH-54375 MH-55375 MH-56375
  11. 11. ® Catalog No. Ø3.75mm Standard Platform Dimensions MF7-08375 Ø 3.75mm length 8mm SEVEN internal hex. implant Ø 3.75mm length 10mm MF7-10375 MF7-11375 Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched Ø 3.75mm length 11.50mm MF7-13375 STANDARD Ø 3.75mm length 13mm 2.45 Ø 3.75mm length 16mm MF7-16375 Ø 3.60 Ø 3.75 L Final Drill Ø 2.80 A specially designed final drill for 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure. Ø 3.10 Ø3.75mm Implant Procedure Drilling Speed (RPM) 12001500 Diameter Ø1.90 Ø2.40 200400 500700 9001200 Ø2.40 Ø2.80 Ø2.80 200500 Ø2.80 Ø3.60 Ø3.75 15-25 Ø3.75 OR Final drill For bone type 12 MT-GDN33 Countersink For bone type 34 Do not use the final drill for bone type 34 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  12. 12. 12. ® STANDARD Ø4.20mm Standard Platform Catalog No. Dimensions MF7-06420 Ø 4.20mm length 6mm SEVEN internal hex. implant Ø 4.20mm length 8mm MF7-08420 MF7-10420 Ø 4.20mm length 10mm MF7-11420 Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched Ø 4.20mm length 11.50mm 2.45 Ø4.20 Ø4.10 MF7-13420 Ø 4.20mm length 13mm MF7-16420 Ø 3.75 Ø 4.20mm length 16mm 0.4mm L Final Drill Ø3.30 A specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure. Ø 3.70  Ø4.20mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 Diameter Ø1.90 Ø2.40 500700 Ø2.40 Ø2.80 Ø3.20 200400 400700 Ø3.20 200500 Ø3.30 Ø4.10 Ø3.30 Ø4.20 15-25 Ø4.20 OR Final drill For bone type 12 MT-GDN33 Countersink For bone type 34 Do not use the final drill for bone types 34 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  13. 13. WIDE ® Screw type implants range Wide Platform 6mm 8mm 10mm MF7-06500 Length MF7-08500 11.50mm MF7-10500 13mm 16mm MF7-13500 MF7-16500 Surgical tools Type MF7-11500 (For more information please refer to page no. 45-46) Ø5 mm MT-HLI10 Long insertion tool, int. hex. connection MF7-06600 MF7-08600 MF7-10600 MF7-11600 MT-HSI10 MF7-13600 Short insertion tool, int. hex. connection Ø6 mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Implant cover screw healing caps Available for heights: 3,4,5mm MC1-00470  Ø 5mm MH-W3500 MH-W4500 MH-W5500 3/4/5mm  Ø 6.5mm 3/4/5mm MH-W3630 MH-W4630 MH-W5630
  14. 14. 14. WIDE ® Catalog No. MF7-06500 Ø5mm Wide Platform Dimensions Ø 5mm length 6mm SEVEN internal hex. implant Ø 5mm length 8mm MF7-08500 Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched MF7-10500 Ø 5mm length 10mm MF7-11500 Ø 5mm length 11.50mm 2.45 Ø 4.90 Ø5 Ø 5mm length 13mm MF7-13500 Ø 4.50 0.4mm L Final Drill Ø 5mm length 16mm MF7-16500 A specially designed final drill for 6, 8, 10, 11.5, 13 and 16mm implants is supplied with every implant, allowing for an easier and safer drilling procedure. Ø 4.50 Ø 4.10  Ø5mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 Diameter Ø1.90 Ø2.40 500700 Ø2.40 400700 Ø2.80 Ø3.20 Ø4 200400 300500 Ø4 200500 Ø4.10 Ø 4.90 Ø5 15-25 Ø5 OR Final drill For bone type 12 MT-GDN50 Countersink For bone type 34 Do not use the final drill for bone types 34 The drilling sequence is demonstrated with a 13mm implant. Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  15. 15. ® Catalog No. Ø6mm Wide Platform Dimensions MF7-06600 Ø 6mm length 6mm SEVEN internal hex. implant Ø 6mm length 8mm MF7-08600 WIDE Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched MF7-10600 Ø 6mm length 10mm MF7-11600 Ø 6mm length 11.50mm 2.45 Ø6 Ø 5.90 Ø 4.50 Ø 6mm length 13mm MF7-13600 0.4mm L Final Drill Ø 5.10 A specially designed final drill for 6, 8, 10, 11.50 and 13mm implants is supplied with every implant, allowing for an easier and safer drilling procedure. Ø 5.50  Ø6mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 Diameter Ø1.90 Ø2.40 500700 Ø2.40 400700 300500 300500 Ø2.80 Ø3.20 Ø4 Ø4.50 Ø5 200400 300500 Ø5 200500 Ø5.10 Ø 5.90 Ø6 OR Final drill For bone type 12 MT-GDN50 Countersink For bone type 34 15-25 Ø6
  16. 16. 16. NARROW Screw type implants range Narrow Platform 6mm Length 8mm 10mm 11.50mm 13mm 16mm MF4-13330 MF4-16330 Type MF4-10330 MF4-11330 Ø3.30 mm Surgical tools (For more information please refer to page no. 45-46) MT-HLI10 Long insertion tool, int. hex. connection MT-HSI10 Short insertion tool, int. hex. connection MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection MT-NRH20 Hex. ratchet long adapter for int. hex. connection, NP Implant cover screw healing caps Available for heights: 2,3,4,6,8mm Ø 4mm 2/3/4/6/8mm MC1-00330 MH-N2330 MH-N3330 MH-N4330 MH-N6330 MH-N8330  Ø 4.3mm 2/3/4/5/6 MH-52330 MH-53330 MH-54330 MH-55330 MH-56330
  17. 17. NARROW Ø3.30mm Narrow Platform Dimensions Catalog No. Ø 3.30mm length 10mm MF4-10330 M4 internal hex. implant Ø 3.30mm length 11.50mm MF4-11330 MF4-13330 Sand Blasted and Acid-Etched Ø 3.30mm length 13mm MF4-16330 Titanium Alloy Ti 6Al 4V ELI Ø 3.30mm length 16mm 2.10 Ø3.30 L Ø 2.65 Ø3.30mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 500700 200500 15-25 Diameter Ø1.90 Ø2.4 Ø2.80 Ø3.00 Ø3.30 Ø3.30 OR For bone type 12 MT-CSN33 Countersink For bone type 34 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  18. 18. 18. STANDARD Screw type implants range Standard Platform 6mm 8mm 10mm MF4-08375 Length 11.50mm MF4-10375 13mm 16mm MF4-13375 MF4-16375 Surgical tools Type MF4-11375 (For more information please refer to page no. 45-46) Ø 3.75 mm MT-HLI10 Long insertion tool, int. hex. connection MF4-06420 MF4-08420 MF4-10420 MF4-11420 MF4-13420 MT-HSI10 MF4-16420 Short insertion tool, int. hex. connection Ø 4.20 mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Implant cover screw healing caps Available for heights: 3,4,5,6mm MC1-00375 MC1-00375 MC1-00375 MC1-00375 3/4/5/6mm 3/4/5/6mm 3/4/5/6mm 3/4/5/6mm Ø 4mm Ø 4mm Ø 5.5mm Ø 5.5mm MH-03375 MH-04375 MH-03375 MH-05375 MH-04375 MH-06375 MH-05375 MH-06375 MH-53375 MH-53375 MH-54375 MH-54375 MH-55375 MH-55375 MH-56375 MH-56375
  19. 19. STANDARD Ø3.75mm Standard Platform Catalog No. Dimensions MF4-06375 Ø 3.75mm length 6mm MF4-08375 Ø 3.75mm length 8mm MF4-10375 Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched Ø 3.75mm length 10mm MF4-11375 M4 internal hex. implant Ø 3.75mm length 11.50mm 2.45 Ø 3.75 Ø 3.75mm length 13mm MF4-13375 L Ø 3.75mm length 16mm MF4-16375 Ø3 Ø3.75mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 500700 400700 200500 15-25 Diameter Ø1.90 Ø2.4 Ø2.80 Ø3.20 Ø3.20 Ø3.75 Ø3.75 OR For bone type 12 MT-GDN33 Countersink For bone type 34 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  20. 20. 20. STANDARD Ø4.20mm Standard Platform Catalog No. Dimensions MF4-06420 Ø 4.20mm length 6mm M4 internal hex. implant Ø 4.20mm length 8mm MF4-08420 MF4-10420 Sand Blasted and Acid-Etched Ø 4.20mm length 10mm MF4-11420 Titanium Alloy Ti 6Al 4V ELI Ø 4.20mm length 11.50mm 2.45 Ø 4.20 Ø 3.75 0.4mm Ø 4.20mm length 13mm MF4-13420 L Ø 4.20mm length 16mm MF4-16420 Ø 3.65 Ø4.20mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 500700 400700 400600 200500 15-25 Diameter Ø1.90 Ø2.4 Ø2.80 Ø3.20 Ø3.80 Ø3.20 Ø4.20 Ø4.20 OR For bone type 12 MT-GDN33 Countersink For bone type 34 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  21. 21. WIDE Screw type implants range Wide Platform 6mm 8mm 10mm 11.50mm 13mm 16mm MF4-06500 Length MF4-08500 MF4-10500 MF4-11500 MF4-13500 MF4-16500 Surgical tools Type (For more information please refer to page no. 45-46) Ø5 mm MT-HLI10 Long insertion tool, int. hex. connection MF4-06600 MF4-08600 MF4-10600 MF4-11600 MT-HSI10 MF4-13600 Short insertion tool, int. hex. connection Ø6 mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Implant cover screw healing caps Available for heights: 3,4,5mm MC1-00470 Ø 5mm 3/4/5mm MH-W3500 MH-W4500 MH-W5500 Ø 6.5mm 3/4/5mm MH-W3630 MH-W4630 MH-W5630
  22. 22. 22. WIDE Catalog No. MF4-06500 Ø5mm Wide Platform Dimensions Ø 5mm length 6mm M4 internal hex. implant Ø 5mm length 8mm MF4-08500 MF4-10500 Sand Blasted and Acid-Etched Ø 5mm length 10mm MF4-11500 Titanium Alloy Ti 6Al 4V ELI Ø 5mm length 11.50mm 2.45 Ø5 Ø4.50 Ø 5mm length 13mm MF4-13500 0.4mm L Ø 5mm length 16mm MF4-16500 Ø4.35 Ø5mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 500700 400700 400600 400600 200500 15-25 Diameter Ø1.90 Ø2.4 Ø2.80 Ø3.20 Ø3.80 Ø4.50 Ø4.50 Ø5.00 Ø5 OR For bone type 12 MT-GDN50 Countersink For bone type 34 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  23. 23. WIDE Catalog No. MF4-06600 Ø6mm Wide Platform Dimensions Ø 6mm length 6mm M4 internal hex. implant Ø 6mm length 8mm MF4-08600 MF4-10600 Ø 6mm length 10mm MF4-11600 Titanium Alloy Ti 6Al 4V ELI Sand Blasted and Acid-Etched Ø 6mm length 11.50mm 2.45 Ø6 Ø4.50 Ø 6mm length 13mm MF4-13600 0.4mm L Ø 5.35 Ø6mm Implant Procedure Drilling Speed (RPM) 12001500 9001200 500700 400700 400600 400600 300500 300500 200500 Diameter Ø1.90 Ø2.4 Ø2.80 Ø3.20 Ø3.80 Ø4.50 Ø5 Ø5.50 Ø4.50 Ø6.00 OR For bone type 12 MT-GDN50 Countersink For bone type 34 15-25 Ø6
  24. 24. 24. Implant Insertion Tools 2 1 3 Implant insertion tools are designed to facilitate quick and reliable implant placement procedures. The unique 3 in 1 key system, minimizes the number of tools required and maximizes flexibility. 1 Insertion tool for hand key adapter 2 Insertion tool for motor 3 Insertion tool for ratchet adapter Please note: In order to assure efficient operation, keys should be fully inserted into the implants. Complete insertion of the key optimizes the transfer of force during implant placement and enables simple release of the key from the hex. at the end of the procedure. Key will not hold the implant properly unless it is completely securely inserted into the hex. Implant insertion tools The improved insertion tool allows the delivery of a cover screw or a healing cap onto the implant after insertion. MT-HLI10 Long insertion tool, int. hex. connection MT-HSI10 Short insertion tool, int. hex. connection MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection
  25. 25. Screw type implants range One Piece 10mm 11.50mm 13mm 16mm MO1-10300 MO1-11300 MO1-13300 MO1-16300 MO1-10350 Length MO1-11350 MO1-13350 MO1-16350 Type Ø 3 mm Ø 3.50 mm Surgical Tools MT-HKS15 UNO One Piece implant short key MT-HKL21 UNO One Piece implant long key MT-HKO21 UNO One Piece implant insertion tool
  26. 26. 26. Ø3mm Catalog No. One Piece Dimensions Ø 3mm length 10mm MO1-10300 UNO One Piece Implant Ø 3mm length 11.50mm MO1-11300 MO1-13300 Thread section is Sand Blasted and Acid-Etched Ø 3mm length 13mm MO1-16300 Titanium Alloy Ti 6Al 4V ELI Ø 3mm length 16mm 6.3mm 2.7mm Ø3 L  Ø3mm  Implant Procedure   Drilling Speed (RPM) 12001500 Diameter Ø1.90 Ø2 15-25 700900 9001200 Ø2 Ø2.40 Ø2.4 Ø3 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  27. 27. Ø3.50mm Catalog No. One Piece Dimensions Ø 3.50mm length 10mm MO1-10350 UNO One Piece Implant Ø 3.50mm length 11.50mm MO1-11350 MO1-13350 Thread section is Sand Blasted and Acid-Etched Ø 3.50mm length 13mm MO1-16350 Titanium Alloy Ti 6Al 4V ELI Ø 3.50mm length 16mm 6.3mm 2.7mm Ø 3.50 L    Ø3.50mm  Implant Procedure Drilling Speed (RPM) 12001500 9001200 Diameter Ø1.90 Ø2 700900 Ø2 500700 Ø2.40 Ø3 15-25 Ø3 Ø3.50 Procedures recommended by MIS cannot replace the judgment and professional experience of the surgeon.
  28. 28. 28. UNO One Piece Restorative Components UNO restorative components include an analog and a multi-purpose plastic cap, that may be used as an accurate impression coping, a temporary healing cap or as a base for a temporary restoration. Impression coping. The impression coping combines the benefits of closed and open tray impression techniques, resulting in accurate working models and perfectly fitting restorations. Temporary restoration. The impression coping can be used as a base for a temporary restoration by cutting off the upper section and roughening the surface. The use of non-eugenol temporary cement is recommended. Healing cap. By cutting off the upper section, the plastic cap becomes a healing cap. MM-OUP01 UNO One Piece implant comfort plastic cap MO1-RSA10 UNO One Piece implant analog
  29. 29. Screw type range Orthodontic Anchor Screw 6mm 8mm 10mm 12mm MG2-06160 Length MG2-08160 MG2-10160 MG2-12160 Orthodontic Anchor Screw Type Titanium Alloy Ti 6Al 4V ELI Ø  .60 1 mm 2.5 2.75 Link Tools Link tools are specially engineered to allow simple, smooth and quick insertion or removal of Link orthodontic anchor screws. Insertion or removal may be safely and effectively accomplished by hand. MT-TDO01 Ortho anchor pilot drill 1mm MT-SCD20 Short cross driver for orthodontic screws MT-LCD20 Long cross driver for orthodontic screws MT-MSD20 Surgical adapter driver
  30. 30. 30. Packaging The innovative MIS packaging system is designed for simple and easy use. All of our implant boxes feature distinctive colors, large typeface, clear data labels and a pull tab for quick opening. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage. Boxes are a uniform shape and height, specifically designed to fit in clinic cabinets for easy accessibility and compact space-saving storage. Implant identification markings Quick identification markings signify: implant diameter (top), implant length (middle) and implant platform (bottom). Pull tab Convenient pull tab facilitates easy, quick opening of the box during surgery.
  31. 31. Implant Label Colors Light Gray Ø3 UNO One Piece Gray Ø3.50 UNO One Piece Yellow Ø3.30 Narrow (SEVEN, M4) Red Ø3.75 Standard (SEVEN, M4) Blue Ø4.20 Standard (SEVEN, M4) Green Ø5 Wide (SEVEN, M4) White Ø6 Wide (SEVEN, M4)
  32. 32. 32.
  33. 33. Surgical Instruments. MIS offers a full range of surgical kits and instruments, aiming to simplify surgical procedures to the benefit of both patients and clinicians.
  34. 34. 34. 1 5 MT-TDN20 MT-P2411 Pilot Drills - External Irrigation 1.5:1 2 1:1 6 MT-P2406 1 MT-TDN20 5 Pilot drill 2mm external irrigation MT-P2413 Pilot drill with built-in stopper dia. 2.40 height 11.5mm Material: Stainless steel Dimensions: Length - Length 37.3 Diameter - 2mm 2 MT-P2406 Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm 6 Pilot drill with built-in stopper dia. 2.40 height 6mm 3 3 7 MT-P2408 Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm MT-P2408 7 Pilot drill with built-in stopper dia. 2.40 height 8mm 1:1 MT-P2416 Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm MT-P2410 Pilot drill with built-in stopper dia. 2.40 height 10mm Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm 1:1 1:1 MT-P2410 6mm Depth 8mm Depth 10mm Depth 11.5mm Depth Pilot Drills External Irrigation 13mm Depth 1:1 16mm Depth 4 MT-P2416 Pilot drill with built-in stopper dia. 2.40 height 16mm Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm 4 MT-P2413 Pilot drill with built-in stopper dia. 2.40 height 13mm Material: Stainless steel Dimensions: Length - 31.8mm Diameter - 2.40mm 1:1 MT-P2411
  35. 35. 1 4 MT-TDT28 MT-TDT45 SEVEN Twist Drills - External Irrigation 1:1 1:1 2 5 MT-TDT32 1 MT-TDT50 MT-TDT28 Twist drill 2.8mm external irrigation 4 Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.80mm 2 MT-TDT32 Twist drill 3.2mm external irrigation Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 3.20mm 1:1 3 MT-TDT40 1:1 3 MT-TDT40 Twist drill 4mm external irrigation Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 4mm 1:1 MT-TDT45 Twist drill 4.5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.50mm 5 MT-TDT50 Twist drill 5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5mm
  36. 36. 36. 1 3 MT-TDN28 MT-TDN38 M4 Twist Drills - External Irrigation 1:1 1:1 1 MT-TDN28 3 MT-TDN38 Twist drill 2.80mm external irrigation 2 Twist drill 3.80mm external irrigation Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.8mm Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 3.8mm MT-TDN32 Twist drill 3.20mm external irrigation Material: Stainless steel Dimensions: Length - 37.6mm Diameter - 3.2mm Twist Drills External Irrigation 6mm Depth 8mm Depth 10mm Depth 11.5mm Depth 13mm Depth 1:1 16mm Depth 2 MT-TDN32
  37. 37. 1 3 MT-TDN45 MT-TDN55 M4 Twist Drills - External Irrigation 1:1 2 1:1 1 MT-TDN45 Twist drill 4.50mm external irrigation MT-TDN50 Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.5mm 2 MT-TDN50 Twist drill 5mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5mm 1:1 3 MT-TDN55 Twist drill 5.50mm external irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.5mm
  38. 38. 38. 1 3 MT-TDI28 MT-TDI38 Short Twist Drills - External Irrigation SEVEN M4 Procedure 1:1 MT-TDI32 1 MT-TDI28 3 Twist short drill 2.80mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 2.80mm 2 MT-TDI32 Twist short drill 3.20mm 1:1 6mm Depth 8mm Depth Twist Drills External Irrigation 10mm Depth Material: Stainless steel Dimensions: Length - 30mm Diameter - 3.20mm 11.5mm Depth 2 1:1 MT-TDI38 Twist short drill 3.80mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 3.80mm
  39. 39. 1 3 MT-TDI40 MT-TDI50 Short Twist Drills - External Irrigation SEVEN M4 Procedure 1:1 1:1 2 4 MT-TDI45 MT-TDI55 1 MT-TDI40 4 Twist short drill 4mm Twist short drill 5mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 4.0mm 2 1:1 1:1 MT-TDI45 Twist short drill 4.5mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 4.50mm MT-TDI50 Material: Stainless steel Dimensions: Length - 30mm Diameter - 5.0mm 5 MT-TDI55 Twist short drill 5.5mm Material: Stainless steel Dimensions: Length - 30mm Diameter - 5.50mm
  40. 40. 40. 1 3 MT-TD280 MT-TD380 Twist Drills - Internal Irrigation SEVEN M4 Procedure 1:1 1:1 1 MT-TD280 3 Twist drill 2.80mm internal irrigation MT-TD320 Material: Stainless steel Dimensions: Length - 37.5mm Diameter - 2.8mm 2 MT-TD320 Twist drill 3.20mm internal irrigation Material: Stainless steel Dimensions: Length - 37.6mm Diameter - 3.2mm Twist Drills Internal Irrigation 6mm Depth 8mm Depth 10mm Depth 11.5mm Depth 13mm Depth 1:1 16mm Depth 2 MT-TD380 Twist drill 3.80mm internal irrigation Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 3.8mm
  41. 41. 1 3 MT-TD400 MT-TD500 Twist Drills - Internal Irrigation SEVEN M4 Procedure 1:1 1:1 2 4 MT-TD450 1 MT-TD400 3 Twist drill 4.0mm internal irrigation MT-TD550 Twist drill 5.0mm internal irrigation Material: Stainless steel Dimensions: Length - 37.8mm Diameter - 4.0mm 2 MT-TD450 MT-TD500 Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.0mm 4 MT-TD550 Twist drill 4.50mm internal irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 4.50mm 1:1 1:1 Twist drill 5.50mm internal irrigation Material: Stainless steel Dimensions: Length - 38.2mm Diameter - 5.5mm
  42. 42. 42. 1 4 MT-TDN19 MT-CSN33 Marking Drills Countersinks 1:1 1:1 2 5 MT-GDN33 MT-TD110 1 MT-TDN19 4 Marking drill 1.90mm external irrigation Countersink for Narrow platform Material: Stainless steel Dimensions: Length - 34mm Diameter - 1.90mm 1:1 6 2 MT-GDN50 Material: Stainless steel Dimensions: Length - 31mm Ø3.30mm 5 Marking drill 1.90mm internal irrigation 1:1 3 MT-TD110 3 MT-SMD10 MT-GDN33 Countersink for Standard platform Material: Stainless steel Dimensions: Length - 34mm Diameter - 1.90mm MT-SMD10 MT-CSN33 Material: Stainless steel Dimensions: Length - 26mm Ø3.75mm/ Ø4.20mm 6 MT-GDN50 Spade marking drill 1:1 Countersink for Wide platform Material: Stainless steel Dimensions: Length - 27.5mm Material: Stainless steel Dimensions: Length - 26.8mm Ø5mm / Ø6mm 1:1 MT-GDN50 Countersink for Wide platform
  43. 43. 1 3 MT-00400 MT-00600 Trephine Burs 1:1 2 1:1 MT-00500 1 MT-00400 3 4 Trephine bur 4mm Trephine bur 6mm Material: Stainless steel Dimensions: Length - 37mm Inner Ø4mm Outer Ø5mm 2 1:1 MT-00600 Material: Stainless steel Dimensions: Length - 37mm Inner Ø6mm Outer Ø7mm MT-00500 Trephine bur 5mm Material: Stainless steel Dimensions: Length - 37mm Inner Ø5mm Outer Ø6mm 1 3 MT-CRD21 MT-CRD28 Ceramic Drills External Irrigation 1:1 2 1:1 MT-CRD20 1:1 Ceramic Drill features include: reduced vibration, smooth operation, and continuous substance removal. MIS Ceramic Drills are made of a high performance mix of Zirconia (Zirconium oxide) and Alumina (Aluminum oxide) ceramics. Advantages: Free of metal ,biocompatible, corrosion free, wear resistant (usage between 50 to 100 drills), above average bending strength compared with other ceramic drills, requires approx. half the torque of steel drills. 1 MT-CRD21 Ceramic marking drill dia. 2.10mm Material: Ceramic Dimensions: Length - 28.5mm Diameter - 2.10mm 2 MT-CRD20 Ceramic pilot drill dia. 2mm Material: Ceramic Dimensions: Length - 33.5mm Diameter - 2mm 3 MT-CRD28 Ceramic twist drill dia. 2.80mm Material: Ceramic Dimensions: Length - 35mm Diameter - 2.80mm
  44. 44. 44. 1 4 MT-HKS15 MT-UMS21 Surgical Tools - UNO 1:1 2 MT-HKL21 1:1 5 MT-UML21 1:1 3 1 MT-HKO21 MT-HKS15 4 UNO One Piece implant short key MT-UMS21 UNO One Piece implant motor adapter, short Material: Stainless steel Dimensions: Length - 12mm Material: Stainless steel Dimensions: Length - 22mm 1:1 2 1:1 MT-HKL21 5 MT-UML21 UNO One Piece implant long key Material: Stainless steel Dimensions: Length - 17mm 3 UNO One Piece implant motor adapter, long Material: Stainless steel Dimensions: Length - 30mm MT-HKO21 UNO One Piece implant insertion tool Material: Stainless steel Dimensions: Length - 18.8mm MT-HKO21 UNO One Piece implant insertion tool
  45. 45. 1 6 MT-PP001 MT-SRA10 Surgical Tools 1:1 1:1 2 7 MT-NRH20 MT-HW001 1 MT-PP001 6 MT-SRA10 Parallel pin 1.5:1 3 MT-HSI10 Material: Stainless steel Dimensions: Length - 24mm Ø2mm / Ø3.20mm 1:1 8 MT-SHA10 2 Square connection to ratchet adapter Material: Stainless steel Dimensions: Length - 15.50mm MT-HW001 7 Hand wrench Hex. ratchet long adapter for int. hex. connection, NP Material: Stainless steel Dimensions: Length - 13mm 1:1 4 MT-HLI10 Material: Stainless steel Dimensions: Length - 25mm 1:1 9 3 MT-HSI10 8 Short insertion tool, int. hex. connection MT-MRH10 4 5 Material: Stainless steel Dimensions: Length - 15.6mm 9 Long insertion tool, int. hex. connection 1:1 10 MT-HLI10 MT-MRH10 Hex. ratchet short adapter for int. hex. connection Material: Stainless steel Dimensions: Length - 28.2mm MT-MRH20 MT-SHA10 Hand wrench square connection Material: Stainless steel Dimensions: Length - 24.4mm 1:1 MT-NRH20 Material: Stainless steel Dimensions: Length - 19mm MT-DE001 5 MT-DE001 Drill extender Material: Stainless steel Dimensions: Length - 28.85mm 1:1 1:1 MT-SHA10 Hand wrench, square connection 10 MT-MRH20 Hex. ratchet long adapter for int. hex. connection Material: Stainless steel Dimensions: Length - 25mm
  46. 46. 46. 1 5 MT-HDS30 MT-TP500 1:1 2 MT-HDL30 6 MT-DI001 1:1 1:1 3 Surgical Tools 1:2 7 1 MT-HDS30 5 Short hex. drive 0.05 Tissue punch MT-HMR05 Material: Stainless steel Dimensions: Length - 16mm MT-SM005 2 MT-HDL30 Material: Stainless steel Dimensions: Length - 28mm Inner - Ø4.5mm 6 Long hex. drive 0.05 1:1 8 Implant direction indicator Material: Stainless steel Dimensions: Length - 22mm 3 Material: Stainless steel Dimensions: Length - 17mm MT-SM005 7 Short motor adapter for 0.05 hex. MT-LM005 4 1:1 MT-LM005 Long motor adapter for 0.05 hex. Material: Stainless steel Dimensions: Length - 30mm MT-HMR05 Short direct hand and ratchet hex. key Material: Stainless steel Dimensions: Length - 24mm 1:1 MT-DI001 MT-HMR10 1:1 4 MT-TP500 Material: Stainless steel Dimensions: Length - 20.5mm 8 MT-HMR10 Long direct hand and ratchet hex. key Material: Stainless steel Dimensions: Length - 25mm
  47. 47. Prosthetic hex. driver 2 3 1 1 Prosthetic hex. driver for hand key adapter 2 Prosthetic hex. driver for ratchet adapter 3 Prosthetic hex. driver for motor
  48. 48. 48. 1 4 MT-MSD20 MT-MAL10 Surgical Instruments 1:4 2 MT-RI030 1 MT-MSD20 4 1:5 5 MT-MAL10 Mallet with solid plastic insert Surgical adapter driver Material: Stainless steel Material: Stainless steel + Aluminum Dimensions: Length - 140mm MT-BTI10 2 MT-RI030 5 MT-BTI10 Ratchet wrench Material: Stainless steel Dimensions: Length - 75mm 1:2 3 MT-RI040 3 Implant site depth probe 6/8/10/11.5/13/16mm Material: Stainless steel Dimensions: Length - 100mm Ø1.80mm / Ø2.70mm MT-RI040 Torque wrench 1:3 6 MT-TP420 1:2 1:1 MT-RI040 Torque wrench Material: Stainless steel Dimensions: Length - 108mm 6 MT-TP420 Tissue punch dia. 4.20mm Material: Stainless steel Dimensions: Length - 29.50mm Inner - Ø4.2mm
  49. 49. Torque Ratchet Kit MT-RI050 The new premium Torque Wrench fits all MIS insertion tools and adapters. It is designed for convenient grip, accurate torque transfer and simple assembly and disassembly; to facilitate effortless cleaning and maintenance. Ratchet mode option Wide torque range 15 - 70 Ncm Adjustment key Lubricant tube
  50. 50. 50.
  51. 51. Kits. MIS has dedicated years of collaboration with clinicians in order to develop our state-of-the-art surgical kits. Engineered with the aim of streamlining surgical procedures, MIS kits are designed to simplify standard procedures and provide creative solutions for all your clinical needs.
  52. 52. 52. SEVEN Advanced Surgical Kit The innovative SEVEN Surgical Kit contains all the required tools for SEVEN implant placement procedures. The kit is designed to enhance simplicity and safety; featuring a novel ergonomic design that follows the surgical drilling sequence for a more efficient procedure. A set of length-based pilot drills include color coded visual indicators for both implant diameters and restorative platforms. MK-EI48 Advanced Surgical Kit for the SEVEN implant system with external irrigation drills
  53. 53. Kit Contents Surgical kit for the SEVEN implant system with external irrigation drills MK-EI48 Kit content: Pcs: Pcs: Pcs: Pcs: 1 1 1 1 MT-SMD10 MT-TDT32 Spade marking drill Twist drill 3.2mm external irrigation 1 MT-TDN19 MT-GDN33 MT-TDT40 Marking drill 1.90mm external irrigation Long insertion tool, int. hex. connection Body try-in 5mm 1 1 MT-HLI10 MT-BTT50 1 MT-HSI10 Countersink for standard platform Twist drill 4mm external irrigation Short insertion tool, int. hex. connection 1 1 1 MT-P2406 MT-GDN50 MT-TDT45 Pilot drill with built-in stopper dia. 2.40 height 6mm Countersink for wide platform Twist drill 4.5mm external irrigation 1 MT-SHA10 1 1 1 Hand wrench square connection MT-NRH20 MT-P2408 Pilot drill with built-in stopper dia. 2.40 height 8mm Hex. ratchet long adapter for int. hex. connection, NP MT-TDT50 Twist drill 5mm external irrigation 1 MT-DE001 Drill extender 1 1 1 MT-P2410 MT-BTT24 Pilot drill with built-in stopper dia. 2.40 height 10mm MT-MRH20 Hex. ratchet long adapter for int. hex. connection Body try-in 2.4mm 1 MT-SM005 Short motor adapter for 0.05 hex. 1 1 1 Long direct hand and ratchet hex. key Body try-in 2.8mm Pilot drill with built-in stopper dia. 2.40 height 11.5mm Long motor adapter for 0.05 hex. Parallel pin dia. 2.40/3mm for tapered impl. procedure Body try-in 3.20mm Pilot drill with built-in stopper dia. 2.40 height 13mm MT-LM005 MT-PP240 MT-BTT32 MT-P2413 1 1 1 1 MT-HMR10 MT-BTT28 MT-P2411 1 MT-RI030 Ratchet wrench 1 1 1 MT-BTT40 MT-P2416 Implant direction indicator 1 1 1 MT-DI001 Body try-in 4mm Pilot drill with built-in stopper dia. 2.40 height 16mm MT-TDT28 MT-BTT45 Twist drill 2.8mm external irrigation Body try-in 4.50mm MT-SRA10 Square connection to ratchet adapter
  54. 54. 54. M4 Advanced Surgical Kit MIS M4 implants combine the benefits of cylindrical and conical implant designs, with the aim of achieving excellent primary stability for every clinical scenario. Two main features of M4 implants include the self-tapping, V-shaped thread design with three spiral channels – allowing for smooth insertion even in type 1 bone conditions, and a flat, cutting, tapered apex – enabling instantaneous grip into bone for immediate placement procedures. MK-0016 M4 Advanced Surgical Kit
  55. 55. Kit Contents M4 Advanced Surgical Kit Kit Contents: Pcs: Pcs: Pcs: 1 1 1 MT-SMD10 MT-DE001 Spade marking drill MT-MRH25 Drill extender Hex. ratchet long adapter for int. hex. connection 1 1 MT-TDN19 MT-SRA10 1 Square connection to ratchet adapter Marking drill 1.90mm external irrigation MT-SHA10 Hand wrench square connection 1 1 MT-SM005 MT-P2416 Pilot drill with built-in stopper dia. 2.40 height 16mm Short motor adapter for 0.05 hex. MT-RI030 1 MT-LM005 1 Long motor adapter for 0.05 hex. MT-TDN28 Twist drill 2.8mm external irrigation 1 MT-HSI10 Short insertion tool, int. hex. connection 1 MT-TDN32 Twist drill 3.2mm external irrigation 1 MT-HLI10 Long insertion tool, int. hex. connection 1 MT-TDN38 Twist drill 3.8mm external irrigation 1 MT-CSN33 Countersink for narrow platform 1 MT-TDN45 1 Twist drill 4.5mm external irrigation MT-GDN33 Countersink for standard platform 1 1 MT-TDN50 MT-GDN50 Twist drill 5mm external irrigation Countersink for wide platform 1 1 MT-TDN55 Twist drill 5.5mm external irrigation 1 MT-PP240 Parallel pin dia. 2.40/3mm for tapered impl. procedure Ratchet wrench MK-0016
  56. 56. 56. M4 Drilling Set MK-0014 In order to Make It Simple, the innovative M4 implants Drilling Set was designed as an add-on to the SEVEN Surgical Kit. When the two sets are combined, the doctor has a full range of drills and tools necessary to complete both M4 and SEVEN implant placement procedures. MK-0014 M4 Drilling Set Kit Contents: MT-CSN33 MT-TDN28 MT-TDN45 Twist drill 2.8mm external irrigation Twist drill 4.5mm external irrigation Countersink for narrow platform MT-TDN32 MT-TDN50 MT-GDN33 Twist drill 3.2mm external irrigation Twist drill 5mm external irrigation Countersink for standard platform MT-TDN38 MT-TDN55 MT-GDN50 Twist drill 3.8mm external irrigation Twist drill 5.5mm external irrigation Countersink for wide platform
  57. 57. Yeung Bone Harvest Kit MK-BH26 The Bone Harvest Kit enables, simple and easy bone harvesting during surgery. It provides a revolutionary dual-action bone harvesting system while drilling; the harvested bone can be used elsewhere as needed. the drills can also be used as final drills. Drill Color-coded drill matches sleeve color. Simple. The bone accumulates inside the drill slots during drilling. Easy. The Bone Harvest drills can be used as final drills while harvesting bone. Kit Contents The Bone Harvest Kit includes: Recommended speed is between 20-50 RPM without irrigation. Drill with a slight continuous pressure. While removing the drill, continue rotation to keep the bone inside the drill slots. Drills should not be used more than 30 times. Ø2.80mm MT-BC320 Ø3.20mm MT-BC380 Ø3.80mm MT-BC450 Safe. The Bone Harvest Kit can be used with MIS drill stoppers, to assure a safe drilling procedure. MT-BC280 Ø4.50mm
  58. 58. 58. SEVEN Standard Platform Stoppers Kit MK-BS001 Following the use of MIS length-based pilot drills, the SEVEN Standard Platform Stoppers Kit ensures drilling to the exact desired depth. The kit includes the most commonly used lengths: 8, 10, 11.5 and 13mm. Stoppers Four sleeves for each diameter in 8, 10, 11.5 and 13mm lengths, color-coded according to drills Box Tray can be removed from the box for ease of use Scale Teflon IN Insert Teflon OUT Insert Simple. Quick, easy assembly Easy. Color-coding for quick identification of the sleeve diameter Safe. Safe drilling to desired depth Clear. Clearly arranged depth sleeves for 8 to13mm for two diameters: Ø2.8 and Ø3.2mm Kit Contents Ø2.80 stoppers (for Ø3.75mm implants) Ø3.20 stoppers (for Ø4.20mm implants)
  59. 59. SEVEN Drill Stoppers Kits - Depth-Based MK-SDS** Following the use of the MIS length-based pilot drills, the SEVEN Drill Stoppers Length Kits enable safe and easy drilling to the exact desired depth. 5 different Stoppers Kits are available in lengths: 6, 8, 10, 11.5 and 13mm. Stoppers Five sleeves 2.8, 3.2, 4, 4.5 and 5mm diameters, color-coded according to drills Box Tray can be removed from the box for ease of use 13mm 11.5mm 10mm 8mm Desired drilling depth Scale Teflon IN Insert Teflon OUT Insert Simple. Quick, easy assembly Kit Contents For 6mm implants MK-SDS06 Easy. Color-coding for a quick identification of sleeve diameter Safe. Safe drilling to desired depth Clear. Clearly arranged depth sleeves for Ø2.8mm to Ø5mm diameter drills For 10mm implants MK-SDS10 For 11.5mm implants MK-SDS11 For 8mm implants MK-SDS08 For 13mm implants MK-SDS13
  60. 60. 60. Abrahami Drill Guide Kit MK-0011 The Abrahami Drill Guide Kit has been designed to enable the dental surgeon to accurately locate and drill the osteotomies of two or more consecutive implants with optimal spacing, angulation and parallelism. In standard cases, the Abrahami Kit may be used as a simple alternative to a surgical guide. Although designed as a surgical tool, the Abrahami Drill Guide Kit can also be used as a planning tool. MK-0011 Abrahami Drill Guide Kit
  61. 61. Simple and logical Stabilization Optimal parallelism Ideal distance measurement from adjacent teeth Variable distance options Location Pins Ø2mm Short 10mm Long 16mm Location Pins Ø2.80mm Screw Short 10mm Long 16mm Spring Extension Arms Ball 6, 7, 8mm 9, 10, 11mm Location pin 12, 13, 14mm Paralleling Pin 20mm Before cleaning, the Location Pins must be separated as follows: screws, springs, balls and pins. Cleaning and drying the parts is essential in order to avoid erosion of the parts and to maintain efficient functioning of the system.
  62. 62. 62. Bone Compression Kit MK-0020 The MIS Bone Compression Kit is designed to enhance primary stability and increase immediate bone-to-implant contact in mainly type 3 and type 4 bone conditions. MK-0020 Bone Compression Kit kit is not designed for ridge widening.
  63. 63. Kit Contents Bone Compression Kit Kit Contents: Pcs: Pcs: 1 1 1 MT-SMD10 MO-CO160 Spade marking drill MO-SO300 Convex compression screw Ø1.80-Ø2.90mm 1 MT-HSI10 Pcs: Convex compression screw Ø3mm 1 1 Short insertion tool, int. hex. connection MO-CO200 MO-SO350 Convex compression screw Ø2.30-Ø3.30mm 1 Convex compression screw Ø3.50mm MT-HLI10 Long insertion tool, int. hex. connection 1 1 MO-CO240 Convex compression screw Ø2.70-Ø3.70mm 1 MT-SHA10 Hand wrench square connection 1 MO-CO280 Convex compression screw Ø3.1-Ø4.50mm 1 MT-SRA10 Square connection to ratchet adapter 1 MT-RI030 Ratchet wrench MO-SO400 Convex compression screw Ø4mm MK-0020
  64. 64. 64. UNO Implant Surgical Kit UNO One Piece implants are placed using specially designed tools that fit the implant prosthetic part. The kit includes surgical drills, placement keys and a ratchet wrench. MK-0036 UNO Implant Surgical Kit
  65. 65. Kit Contents UNO Implant Surgical Kit Kit Contents: Pcs: Pcs: Pcs: 1 1 1 MT-SMD10 MT-UML21 Spade marking drill UNO One Piece implant motor adapter, long 1 MT-TDN20 MT-HKO21 UNO One Piece implant insertion tool 1 MT-PP001 Pilot drill 2mm external irrigation Parallel pin 1 MT-RI030 1 MT-P2416 Pilot drill with built-in stopper dia. 2.40 height 16mm 1 MT-TDT30 Twist drill 3mm external irrigation 1 MT-BTT20 Body try-in 2.0mm 1 MT-BTT24 Body try-in 2.4mm 1 MT-BTT30 Body try-in 3.0mm Ratchet wrench 1 MT-HKL21 UNO One Piece implant long key MK-0036
  66. 66. 66. Prosthetic Tools Kit MK-0039 The MIS Prosthetic Tools Kit consists of tools required for standard restorative procedures. The kit includes a torque wrench, a locator placing tool and MIS hex. drivers and implant indicators. In addition, the kit includes an abutment holder system for improved handling and easier abutment adjustments. MK-0039 Prosthetic Tools Kit
  67. 67. Kit Contents Kit Contents: Pcs: Pcs: Pcs: 1 1 1 MM-LSD15 MT-HDS30 Locator torque wrench driver short MT-HDL30 MM-LSD21 MT-DI001 MT-BK235 1 1 MT-IE172 Internal connection abutment extractor MT-SMK13 MT-MUK02 Short motor key adapter 0.05 Multi-Unit key 1 MT-IT100 1 1 MT-HHR07 Short hand screwdriver for 0.05 hex. 1 MT-HHR13 Long hand screwdriver for 0.05 hex. MT-LMK13 Long motor key adapter 0.05 Locator core tool Wide int. hex. Implant analog for universal hand driver 1 1 MM-LCT10 MT-UW002 implant direction Indicator Ball attachment anchor key Torque wrench 1 1 4 1 MT-RI040 Standard Int. hex. Implant analog for universal hand driver Long hex. drive 0.05 Locator torque wrench driver long 1 MT-US002 Short hex. drive 0.05 1 1 Pcs: Closed tray impression coping key MT-MSD20 Surgical adapter driver
  68. 68. 68. Sinus Lift Osteotomes Set MK-0023 The MIS Sinus Lift Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet concave tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety. Concave 6mm 11mm 15mm MK-0023 Sinus Lift Osteotomes Set
  69. 69. Convex Osteotomes Set MK-0024 The MIS Convex Osteotomes Set is used for closed sinus augmentation procedures. The set includes four straight and four bayonet convex tools. All tools are laser marked for depths of 6, 11 and 15mm, and are equipped with stoppers for convenience and safety. Convex 6mm 11mm 15mm MK-0024 Convex Osteotomes Set
  70. 70. 70. MIS offers a comprehensive line of kits for every clinical scenario and matched to every MIS implant system and procedure. The kits are expertly designed to enhance convenience, safety and simplicity. SURGERY KITS M4 SEVEN 13 9 7 Bone Compression Kit Abrahami Drill Guide Kit Zircon Diamond Burr Set 14 8 7 5 5 UNO Surgical Kit 10 PROSTHETIC KITS 5 PROSTHETIC COMPONENT MGUIDE Surgical Kit Prosthetic Kit CPK 2 4 6 9 TI-BASE Kits 6 6 4
  71. 71. Drills Keys Accessories MIS Manual Kits 5 25 Yeung Bone Harvest Kit 4 Stoppers Kit 24 Prosthetic Planning Kit OT Equator Kits MGUIDE Tools Kit 8 Zirconia Prosthetic Abutments 10 Osteotomes Set 5 Abutment Holding System Kit 3 8 3
  72. 72. 72. Prosthetic Options. MIS superstructures are designed to meet all prosthetic needs and fit all accepted working methods. Abutments are available in a wide range of heights, gingival collar heights, angles and margin types. MIS offers solutions for both screw retained and cement retained restorations. The MIS temporary plastic abutments are made of PEEK (polyetheretherketone), a synthetic biocompatible polymer, characterized by high mechanical strength and inert chemical properties. PEEK abutments allow for sustainable temporary restorations that last up to 6 months. In an effort to continuously develop our range of superstructures, MIS offers new Titanium Base abutments, compatible with most CAD/CAM systems software. The new abutments meet the specific requirements of all MIS Internal hex. implant systems. Allowing for a large variety of prosthetic options, the Titanium Base abutments are available for all platform sizes, ensuring superior strength, reliability and aesthetic implant supported restorations.
  73. 73. 1 5 MN-RSM10 MN-IT300 NARROW 2 6 MN-IT100 Analog and Impression Copings 1.5:1 1.5:1 MN-I0330 1 MN-RSM10 5 Implant analog internal hex. NP 1.5:1 3 7 MN-G0160 Direct impression coping Set for closed tray NP Material: Stainless steel Dimensions: Length - 12mm 1.5:1 MN-GP100 2 MN-IT100 Material: Titanium Dimensions: Height - 7.8mm 6 Direct impression coping for closed tray NP 4 3 MN-GP100 Direct impression coping guide pin Internal hex. NP MN-PF330 1.5:1 Material: Titanium Dimensions: Length - 16.5mm 4 MN-PF330 Direct press fit for closed tray NP 1.5:1 MN-IT300 Direct impression coping set for closed tray, NP Material: Titanium Dimensions: Length - 11mm MN-I0330 Direct impression coping for open tray Internal hex. NP Material: Stainless steel Dimensions: Height - 9mm 1.5:1 MN-IT300 Material: Stainless steel Dimensions: Height - 11mm 7 MN-G0160 Direct impression coping guide pin internal hex. Material: Titanium Dimensions: Length - 21mm
  74. 74. 74. 1 MN-CPK61 2 MN-RSM60 3 MN-CHC60 NARROW NPK - Narrow Prosthetic Kits MK-NPK61 5 4 MN-IC600 5 MN-IC040 6 MN-ICH40 1 MN-CPK61 2 MN-RSM60 3 MN-CHC60 4 MN-IC600 5 MN-IC040 6 MN-ICH40 Anatomic 1mm transgingival abutment, crown height 6mm, NP Abutment analog crown height 6mm, NP Plastic healing cap crown height 6mm, NP Direct Impression coping plastic cap, NP Burnout plastic cap, NP Burnout anti-rotation plastic cap, NP MK-NPK61 1mm Narrow prosthetic kit, crown height 6mm, NP
  75. 75. NARROW NPK - Narrow Prosthetic Kits } } Kit Options: 1 6 6 MK-NPK43 MK-NPK44 6 MK-NPK61 6 MK-NPK62 6 MK-NPK63 6 C=6mm H=1,2,3,4mm MK-NPK42 6 C=4mm H=1,2,3,4mm MK-NPK41 MK-NPK64 1mm Narrow prosthetic kit, crown height 4mm, NP 2mm Narrow prosthetic kit, crown height 4mm, NP 3mm Narrow prosthetic kit, crown height 4mm, NP 4mm Narrow prosthetic kit crown height 4mm, NP 1mm Narrow prosthetic kit crown height 6mm, NP 2mm Narrow prosthetic kit, crown height 6mm, NP 3mm Narrow prosthetic kit, crown height 6mm, NP 4mm Narrow prosthetic kit, crown height 6mm, NP C=Crown Height H=Gingival Height Transgingival Abutment, NP C H All CPK abutments can be purchased separately. They are provided with with a burnout anti-rotation plastic cap (MN-ICH40). MN-CPK41* MN-CPK42* MN-CPK43* MN-CPK44* MN-CPK61* MN-CPK62* MN-CPK63* MN-CPK64* C=4mm H=1,2,3,4mm C=6mm H=1,2,3,4mm
  76. 76. 76. 1 4 MN-CP013 MN-S0160 NARROW Direct, Screw Retained Restoration Options 1.5:1 5 MN-GP010 1.5:1 2 MN-CPH13 1 3 6 MN-TPA12 4 MN-S0160 Direct plastic cylinder Internal hex. without hex. NP MN-GPC10 2 Direct prosthetic screw internal hex. NP Material: Burnout plastic Dimensions: Height - 11mm Diameter - 3.50mm 1.5:1 1.5:1 MN-CP013 Material: Titanium Dimensions: Length - 7.6mm 30 Ncm MN-CPH13 5 MN-GP010 Direct plastic cylinder internal hex. with hex. NP Material: Burnout plastic Dimensions: Height - 11mm Diameter - 3.50mm 1.5:1 Direct gold plastic cylinder without hex. internal hex. NP Material: Burnout Plastic + gold -a Dimensions: Height - 15.5mm Diameter - 4.50mm 1.5:1 3 MN-TPA12 Narrow profile temporary plastic abutment, NP Material: Peek Dimensions: Height - 11mm Diameter - 3.50mm The ”functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection. Please note: PEEK abutments are radiolucent! 6 MN-GPC10 Direct gold plastic cylinder with hex. internal hex. SP Material: Dimensions: Height - 15.5mm Diameter - 4.50mm
  77. 77. 1 3 MN-MAC10 MN-S0160 NARROW 1.3:1 1.5:1 2 4 Cemented Restoration Options MN-TPA10 MN-AN020 1.5:1 1 MN-MAC10 3 Cementing post, NP Direct prosthetic screw internal hex. NP 1.5:1 Material: Titanium Dimensions: Height - 11mm 2 MN-AN020 20 degree angulated abutment Internal hex. NP Material: Titanium Dimensions: Height - 8mm MN-TPA10 Temporary plastic abutment, NP MN-S0160 Material: Titanium Dimensions: Length - 7.6mm 30 Ncm 4 MN-TPA10 Temporary plastic abutment, NP Material: Peek Dimensions: Height - 11mm Diameter - 4mm
  78. 78. 78. 1 MN-S0160 2 3 MN-TB001 MN-RSM10 NARROW CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4 Hexagon Connection (with anti-rotation mechanism) GI-SCH11 1 MN-S0160 2 MN-TB001 3 MN-RSM10 4 GI-SCH11 Direct prosthetic screw internal hex. Narrow platform Ti Base internal hex. connection for CAD/CAM, Narrow platform Implant analog internal hex. Narrow platform Burnout anti-rotation plastic cap for Ti Base, Standard platform Hex. MK-TBN4 Ti Base kit h. 4mm for internal hex. connection, NP For Laboratory Use Only! Scan abutment MN-SP001 Scanning abutment internal hex. connection, Narrow platform MN-S0160 MK-TBN4 Direct prosthetic screw internal hex. Narrow platform
  79. 79. 1 MN-S0160 2 MN-TB002 3 MN-RSM10 NARROW CAD/CAM Ti Base Kit Multi-Unit Restoration Non-Hexagon Connection 4 MK-MUN4 (without anti-rotational mechanism) GI-SCH11 1 MN-S0160 2 MN-TB002 3 MN-RSM10 4 GI-SCH11 Direct prosthetic screw internal hex. Narrow platform Multi Unit Ti-Base internal hex. connection, Narrow platform Implant analog internal hex. Narrow platform Burnout anti-rotation plastic cap for Ti-Base, Standard platform Non-Hex. MK-MUN4 Multi Unit Ti Base kit h. 4mm internal hex. connection, NP For Laboratory Use Only! Scan abutment MN-SP001 Scanning abutment internal hex. connection, Narrow platform MN-S0160 Direct prosthetic screw internal hex. Narrow platform
  80. 80. 80.80. NARROW OT Equator kit Kits Laboratory Use: Metal housing OT Equator laboratory cap (black) } H=1,2,3,4,5mm Clinical Use: Metal housing Kit Options: MK-NOE1 OT Equator internal hex. kit, gingival height 1mm, NP MK-NOE2 OT Equator internal hex. kit, gingival height 2mm, NP MK-NOE3 OT Equator Internal hex. kit, gingival height 3mm, NP MK-NOE4 OT Equator internal hex. kit, gingival height 4mm, NP MK-NOE5 OT Equator internal hex. kit, gingival height 5mm, NP Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01 Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01 Standard retention (white) OT Equator cap (1.8kg) OE-RCW01 High retention (violet) OT Equator cap (2.7kg) OE-RCV01 2.6mm 1.7mm OT Equator retention caps may be purchased separately. Equator Ball Attachment
  81. 81. OT Equator Tools MT-LM005 Long motor adapter for 0.05 hex. MT-SM005 Short motor adapter for 0.05 hex. OT Equator Abutments Ø2.5mm Ø2.5mm 1.7mm 1.7mm 2mm 1mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Ø2.5mm Ø2.5mm 1.7mm 1.7mm OE-RSM60 3mm OT Equator analog OE-IC001 OT Equator tear off impression transfer cap Ø2.5mm OE-IC002 OT Equator impression coping cap 1.7mm 5mm ET-IT001 OT Equator handling tools 4mm
  82. 82. 82. 1 MN-S0160 2 MN-IN060 3 MM-SIZW6 NARROW Non-Cemented Zircon Prosthetic Abutments 5 Zircon incisor 15º abutment set int. hex., NP 1 MN-S0160 2 MN-IN060 3 1 MN-S0160 2 MK-NIZ6 MM-SIZW6 Direct prosthetic screw internal hex. Incisor esthetic Ti abutment internal hex., NP Incisor white Zircon crown, SP / NP MN-CIZ60 NARROW Pre-Cemented Zircon Prosthetic Abutments 5 Zircon cemented incisor 15º abutment set int. hex., NP 1 MN-S0160 2 MN-CIZ60 Direct prosthetic screw internal hex. Incisor TiZi abutment internal hex., NP MK-NIC6
  83. 83. NARROW Zircon Abutment Kits Kit Options: } MK-NIZ6 Zircon incisor 15º abutment set internal hex., NP MK-NIC6 Zircon cemented incisor 15º abutment set internal hex., NP Zircon cemented incisor 15º abutment set int. hex., NP Zircon incisor 15º abutment set int. hex., NP 8.5mm 2mm Zircon abutments cannot be purchased separately. They are provided with direct prosthetic screw internal hex. (MN-S0160). 1mm
  84. 84. 84. 1 9 MB-N2330 MB-PR010 NARROW 3:1 1.5:1 2 10 Ball Attachment System MB-TBS10 MB-N3330 3:1 11 MB-TBS20 3:1 1.5:1 3 12 MT-TSD10 1 MB-N2330 9 Ball attachment anchor internal hex. 2mm, NP MB-N4330 Plastic mounting sleeve Material: Titanium Dimensions: Height - 2mm 2 1.5:1 4 13 MB-DMH10 10 3 MB-N4330 Material: Steel Dimensions: Diameter - 2.5mm 11 Ball attachment anchor Internal hex. 4mm, NP MB-RS375 14 MB-TBS20 Titanium ball cap spring soft Material: Titanium Dimensions: Height - 4mm 1:1 MB-TBS10 Titanium ball cap spring standard Material: Titanium Dimensions: Height - 3mm 1:1.5 5 Material: Plastic Dimensions: Length - 2mm Diameter - 3.8mm Ball attachment anchor internal hex. 3mm, NP 1:2 MT-NB225 MB-N3330 MB-PR010 Material: Steel Dimensions: Diameter - 2.6mm MB-PPC10 4 MT-NB225 12 MT-TSD10 6 2:1 15 MB-SF200 MB-DB235 5 MB-RS375 13 MB-DMH10 Double metal housing Ball attachment analog Internal hex. 1.5:1 8 Material: Stainless steel Dimensions: Length - 60mm 2:1 16 MB-GPS10 Screw driver for titanium ball cap MB-PPR10 1.5:1 7 Ball attachment anchor key Material: Stainless steel Dimensions: Length - 22mm 1:1 Material: Stainless steel Dimensions: Length - 15.1mm MB-TTP10 1:1 1.5:1 6 MB-SF200 14 Material: Plastic Dimensions: Length - 2.6mm Retention 1200-1300g Material: Plastic Dimensions: Length - 3.5mm Ø2.25mm 7 MB-GPS10 15 Gold ball cap 8 MB-TTP10 Titanium ball cap MB-PPR10 Soft plastic cap for metal housing Material: Gold-e Dimensions: Length - 2.4mm 2.6mm MB-PPC10 Standard plastic cap for metal housing Plastic ball cap Material: Plastic Dimensions: Length - 2.6mm Retention 800-950g 16 MB-DB235 Plastic disc for ball attachment 0.55mm Material: Titanium Dimensions: Length - 3.1mm Gingival leight 2,3,4mm Material: Plastic Dimensions: Diameter - 15mm MB-N2330 Ball attachment anchor internal hex. 2mm, NP Although the visual features a SEVEN implant, the abutment fits all MIS narrow internal hex. implants.
  85. 85. 1 8 MB-NZL00 MM-LCT10 NARROW 1:1 2 Locator Attachment System MB-NZL01 1:1 3 MB-NZL02 1:1.5 9 MM-LMP02 1 1:1 4 MB-NZL03 10 2 MB-NZL01 Material: Steel / Titanium Nitride coated Ti 9 Locator abutment 1.0mm hgt, NP MM-LFA40 6 MB-NZL05 1:1.5 3 MB-NZL02 Material: Steel/ Nylon Dimensions: Length - 1.80mm 10 Locator abutment 2.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 2mm MB-NZL06 4 MB-NZL03 Locator abutment 3.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 3mm 1:1 5 MM-LIC10 Locator impression coping (4 Pack) Material: Aluminum polyethylene Dimensions: Length - 4.50mm Diameter - 4.70mm 1:1 7 MM-LMP02 Locator male processing package (2 Pack) Material: Titanium Nitride coated Ti Dimensions: Height - 1mm 1:1 MM-LCT10 Locator core tool Material: Titanium Nitride coated Ti Dimensions: Height - 0mm 1:1.5 11 MB-NZL04 8 MM-LIC10 1:1 5 MB-NZL00 Locator abutment 0mm hgt., NP 1:1.5 11 MM-LFA40 Locator female analog 4mm dia. (4 Pack) Material: Aluminum Dimensions: Length - 10.40mm Diameter - 4mm MB-NZL04 Locator abutment 4.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 4 mm 6 MB-NZL05 Locator abutment 5.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 5mm 7 1.78mm Gingival height 0-6mm MB-NZL06 Locator abutment 6.0mm hgt, NP Material: Titanium Nitride coated Ti Dimensions: Height - 6mm Note: Locator selection should be based on gingival height MB-NZL03 Locator Narrow abutment 3.0mm Although the visual features a SEVEN implant, the abutment fits all Narrow internal hex. implants.
  86. 86. 86. 1 6 MM-LRM10 MM-LPP10 NARROW 1:1 2 7 MM-LLR10 2 1:1 8 Locator Attachment System MM-LBP10 MM-LSD15 MM-LRM10 1:1 1:1 3 MM-LEL10 3 1:1 MM-LLR10 1 1:1 4 MM-LER10 4 1:1 MM-LEL10 5 MM-LELE1 5 9 MM-LSD21 2 1:1 MM-LER10 MM-LLR10 Material: Polyethylene Black Dimensions: Length - 15mm Diameter - 4.60mm 7 Material: Polyethylene Black Dimensions: Length - 1.80mm Diameter - 4.60mm Material: Nylon Pink Dimensions: Length - 1.80mm Diameter - 4.70mm 3 MM-LELE1 MM-LEL10 MM-LBP10 Locator black processing replacement male (4 Pack) (4 Pack) 0°-10°*, 3 lbs**, 1.36 kg** 1:1 MM-LPP10 Locator parallel post (4 Pack) Locator light retention 1:1 6 6 Material: Nylon Material: Aluminum Dimensions: Length - 10.40mm Dimensions: Length - 1.80mm Diameter - 4.70mm Diameter - 4mm 1.5:1 1:1 MM-LFA40 MM-LRM10 Locator female analog 4mm Locator replacement male clear (4 Pack) Pack) 5 lbs**, 2.27 kg** dia. (4 0°-10°*, 8 MM-LSD15 Locator extra-light retention Locator torque wrench driver short Material: Nylon Blue Dimensions: Length - 1.80mm Diameter - 4.70mm Material: Stainless steel Dimensions: Length - 15mm (4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg** 1.5:1 1:1 4 MM-LER10 9 MM-LSD21 Locator extended range (4 Pack) Locator torque wrench driver long Material: Nylon Green Dimensions: Length - 1.80mm Diameter - 4.70mm Material: Stainless steel Dimensions: Length - 21mm 10°-20°*, 3-4 lbs**, 1.36-1.82 kg** 5 MM-LELE1 Locator extra light-extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg** Material: Nylon Red Dimensions: Length - 1.80mm Diameter - 4.70mm * For the correction of axes divergences for one implant ** Retention strength
  87. 87. 1 5 MD-IT100 MD-IT300 STANDARD Analog and Impression Copings 1.5:1 1.5:1 2 6 MD-PF375 MD-GP100 1 1.5:1 1.5:1 3 7 Direct impression coping for closed tray internal hex. SP 5 2 MD-GP100 Material: Titanium Dimensions: Height - 8mm 6 Direct impression coping guide pin Internal hex. 3 MD-I0375 Direct impression coping for open tray internal hex. SP Material: Stainless steel Dimensions: Height - 11mm 1.5:1 4 MD-G0213 4 MD-G0213 Direct impression coping guide pin Internal hex. Material: Titanium Dimensions: Length - 21.3mm 1.5:1 MD-IT100 Direct impression coping for closed tray internal hex. SP MD-PF375 Press fit impression coping for closed tray, SP Material: Titanium Dimensions: Length - 16.5mm 1.5:1 MD-IT300 Direct impression coping for closed tray internal hex. Material: Stainless steel Dimensions: height - 9mm MD-RSM10 MD-I0375 MD-IT100 Material: Titanium Dimensions: Height - 11mm 7 MD-RSM10 Implant analog internal hex. SP Material: Stainless steel Dimensions: Length - 12mm
  88. 88. 88. 1 MD-CPK61 2 MD-RSM60 3 MM-CHC60 STANDARD CPK - Complete Prosthetic Kit MK-CPK61 5 4 MD-IC800 5 MD-IC040 6 MD-ICH40 1 MD-CPK61 2 MD-RSM60 3 MM-CHC60 4 MD-IC800 5 MD-IC040 6 MD-ICH40 Anatomic 1mm transgingival abutment, crown height 6mm, SP Abutment analog crown height 6mm, SP Plastic healing cap crown h. 6mm, SP Direct Impression coping, h. 8mm, SP Burnout plastic cap, SP Burnout anti-rotation plastic cap, SP MK-CPK61 1mm Complete Prosthetic kit, h. 6mm, SP
  89. 89. STANDARD CPK - Complete Prosthetic Kit } } } Options: 1 6 MK-CPK43 MK-CPK44 MK-CPK61 6 MK-CPK62 6 MK-CPK63 6 MK-CPK64 6 MK-CPK81 6 MK-CPK82 6 MK-CPK83 6 C=8mm H=1,2,3,4mm 6 6 C=6mm H=1,2,3,4mm MK-CPK42 6 C=4mm H=1,2,3,4mm MK-CPK41 MK-CPK84 1mm complete prosthetic kit, crown height 4mm, SP 2mm complete prosthetic kit, crown height 4mm, SP 3mm complete prosthetic kit, crown height 4mm, SP 4mm complete prosthetic kit, crown height 4mm, SP 1mm complete prosthetic kit, crown height 6mm, SP 2mm complete prosthetic kit, crown height 6mm, SP 3mm complete prosthetic kit, crown height 6mm, SP 4mm complete prosthetic kit, crown height 6mm, SP 1mm complete prosthetic kit, crown height 8mm, SP 2mm complete prosthetic kit, crown height 8mm, SP 3mm complete prosthetic kit, crown height 8mm, SP 4mm complete prosthetic kit, crown height 8mm, SP C=Crown Height H=Gingival Height Anatomic transgingival abutment, SP C H All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MD-ICH40). MD-CPK41* C=4mm, MD-CPK42* H=1,2,3,4mm MD-CPK43* MD-CPK44* MD-CPK61* C=6mm, MD-CPK62* H=1,2,3,4mm MD-CPK63* MD-CPK64* MD-CPK81* C=8mm, MD-CPK82* H=1,2,3,4mm MD-CPK83* MD-CPK84*
  90. 90. 90. 1 8 MD-TCH13 MD-GPC10 STANDARD Direct, Screw Retained Restoration Options 1.5:1 2 MD-TPH50 1.5:1 9 MD-TPA12 1 10 3 MD-CPH13 4 Narrow profile temporary plastic abutment, SP Material: Peek Dimensions: Height - 11mm Diameter - 3.75mm MD-CP013 10 MD-G0220 Direct gold prosthetic screw internal hex. Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm MD-CP050 11 MD-S0200 Wide profile direct plastic cylinder without hex. SP 13 Mini prosthetic screw internal hex. Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 5mm 1.5:1 Material: Titanium Dimensions: Length - 6.90mm 30 Ncm MD-S0222 1.5:1 5 MD-CPH50 MD-CPH13 12 MD-S0220 Direct plastic cylinder with hex. internal hex. SP 14 MD-S0224 1.5:1 6 Direct prosthetic screw internal hex. Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 3.75mm 1.5:1 7 MD-TPA12 Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 3.75mm MD-S0220 1.5:1 6 9 Direct plastic cylinder without hex. internal hex. SP 1.5:1 5 MD-TPH50 Material: Peek Dimensions: Height - 12mm Diameter - 5mm MD-S0200 MD-CP050 12 Material: Burnout Plastic + gold -a Dimensions: Height - 15mm Diameter - 5.0mm Direct temporary plastic cylinder internal hex. SP 1.5:1 11 Direct gold plastic cylinder with hex. internal hex. SP MD-G0220 2 4 MD-GPC10 Material: Titanium Dimensions: Height - 11mm 1.5:1 MD-CP013 1.5:1 8 Direct temporary cylinder with hex. internal hex. SP 1.5:1 3 MD-TCH13 Material: Titanium Dimensions: Length - 7.60mm 30 Ncm MD-CPH50 13 MD-S0222 Wide profile direct plastic cylinder with hex. SP 1.5:1 7 Medium prosthetic screw internal hex. Material: Burnout Plastic Dimensions: Height - 11mm Diameter - 5mm MD-GP010 Material: Titanium Dimensions: Length - 12mm 30 Ncm MD-GP010 Direct gold plastic cylinder without hex. internal hex. SP 1.5:1 The ”functional height“ of all abutments is measured from the platform connection and does not include the internal hex. connection. Please note: PEEK abutments are radiolucent! Material: Burnout Plastic + gold -a Dimensions: Height - 15mm Diameter - 5mm 14 MD-S0224 Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 14mm 30 Ncm
  91. 91. 1 6 MD-A0010 MD-MACF1 STANDARD Cemented Restoration Options 1.5:1 2 1.5:1 MD-P0030 7 MD-MAC10 1 1.5:1 3 8 MD-CTP10 6 MD-MACF1 Friction fit cementing post platform switching, SP Material: Titanium Dimensions: Height - 9mm MD-WMAC1 2 Material: Titanium Dimensions: Height - 11mm Diameter - 4.80mm MD-P0030 7 MD-MAC10 Esthetic abutment internal hex. 3mm, SP 1.5:1 MD-TPA10 3 Standard cementing post, SP Material: Titanium Dimensions: Height - 11mm 1.5:1 4 MD-A0010 Esthetic abutment internal hex. 1mm, SP 1.5:1 Material: Titanium Dimensions: Height - 11mm Diameter - 4.75mm MD-CTP10 8 MD-WMAC1 Narrow profile cementing post, SP Material: Titanium Dimensions: Height - 8.5mm Diameter - 3.75mm 1.5:1 4 Wide profile cementing post, SP Material: Titanium Dimensions: Height - 11mm Diameter - 5.50mm MD-TPA10 Temporary plastic abutment, SP Material: Peek Dimensions: Height - 11mm Diameter - 4.75mm MD-TPA10 Temporary plastic abutment, SP
  92. 92. 92. 1 7 MD-A1510 MD-G0220 STANDARD Direct, Cemented Restoration Options 1.5:1 1.5:1 2 8 MD-S0200 MD-A2510 1.5:1 9 MD-S0220 1 1.5:1 3 1.5:1 2 MD-AN251 11 8 Material: Titanium Dimensions: Length - 6.90mm 30 Ncm MD-S0224 MD-AN151 9 15º angulated abutment internal hex. SP 1.5:1 MD-P1530 1.5:1 4 MD-AN251 25º angulated abutment internal hex. SP Material: Titanium Dimensions: Length - 7.60mm 30 Ncm 10 Material: Titanium Dimensions: Length - 12mm 30 Ncm MD-P2530 5 MD-P1530 Esthetic 15º angulated abutment internal hex. 3mm, SP Material: Titanium Dimensions: Height - 11mm 1.5:1 6 MD-P2530 Esthetic 25º angulated abutment internal hex. 3mm Material: Titanium Dimensions: Height - 11mm MD-S0222 Medium prosthetic screw internal hex. Material: Titanium Dimensions: Height - 8.5mm 1.5:1 MD-S0220 Direct prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm The ” functional height “ of all abutments is measured from the platform connection and does not include the internal hex. connection. MD-S0200 Mini prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm 3 6 Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm Esthetic 25º angulated abutment internal hex. 1mm, SP 1.5:1 5 MD-A2510 MD-G0220 Direct gold prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm MD-S0222 1.5:1 4 7 Esthetic 15º angulated abutment internal hex. 1mm, SP MD-AN151 10 MD-A1510 11 MD-S0224 Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 14mm 30 Ncm
  93. 93. Ø5.60mm Esthetic abutments 0º Ø5.60mm Ø3.40mm Ø3.40mm 7mm 7mm 8mm 8mm 3mm 1mm MD-A0010 MD-P0030 Esthetic angulated abutments 15º Angulated abutments 15º Ø5.20mm Ø5.20mm Ø5.20mm Ø2.80mm 7mm 8mm 3.50 2.80 7mm 8mm 2.40 6.6mm 7.5mm 2.40 3mm 1.5mm 1mm MD-A1510 MD-P1530 MD-AN151 Esthetic angulated abutments 25º Angulated abutments 25º Ø5.60mm Ø5.60mm Ø5.60mm Ø3.30mm 3.50 7mm 8mm 2.40 7mm 8mm 3.30 3.30 3mm 1mm MD-A2510 6.1mm 6.9mm 1.6mm MD-P2530 MD-AN251 Standard abutments MD-MAC10 Ø4.75mm 11mm 11mm 8.5mm MD-CTP10 Ø5.50mm Ø4.75mm Ø3.75mm MD-WMAC1 11mm MD-MACF1
  94. 94. 94. 1 MD-S0220 2 MD-TB001 3 MD-RSM10 STANDARD CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4 Hexagon Connection (with anti-rotational mechanism) GI-SCH11 1 MD-S0220 2 MD-TB001 3 MD-RSM10 4 GI-SCH11 Direct prosthetic screw internal hex. Ti Base Internal hex. connection for CAD/CAM, Standard platform Implant analog Internal hex. Standard platform Burnout anti-rotation plastic cap for Ti Base, Standard platform Hex. MK-TBS4 Ti base Kit h. 4mm for internal hex. connection, SP For Laboratory Use Only! Scan abutment MD-SP001 Scanning abutment internal hex. connection, Standard platform MD-S0220 Direct prosthetic screw internal hex. MK-TBS4
  95. 95. 1 2 MD-S0220 MD-TB002 3 MD-RSM10 STANDARD CAD/CAM Ti Base Kit Multi Unit Restoration 5 4 Non-Hexagon Connection (without anti-rotational mechanism) GI-SCH11 1 MD-S0220 2 MD-TB002 3 MD-RSM10 4 GI-SCH11 Direct prosthetic screw internal hex. Multi Unit Ti Base Internal hex. connection, Standard platform Implant analog Internal hex. Standard platform Burnout anti-rotation plastic cap for Ti Base, Standard platform Non-Hex. MK-MUS4 Multi Unit Ti Base Kit h. 4mm internal hex. connection, SP For Laboratory Use Only! Scan abutment MD-SP001 Scanning abutment internal hex. connection, Standard platform MD-S0220 Direct prosthetic screw internal hex. MK-MUS4
  96. 96. 96.96. STANDARD OT Equator kit Kits Laboratory Use: Metal housing OT Equator laboratory cap (black) H=1,2,3,4,5mm Clinical Use: Metal housing } Options: MK-SOE1 OT Equator internal hex. kit, gingival height 1mm, SP MK-SOE2 OT Equator internal hex. kit, gingival height 2mm, SP MK-SOE3 OT Equator internal hex. kit, gingival height 3mm, SP MK-SOE4 OT Equator internal hex. kit, gingival height 4mm, SP MK-SOE5 OT Equator internal hex. kit, gingival height 5mm, SP Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01 Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01 Standard retention (white) OT Equator cap (1.8kg) OE-RCW01 High retention (violet) OT Equator cap (2.7kg) OE-RCV01 2.6mm 1.7mm OT Equator retention caps may be purchased separately. Equator Ball Attachment
  97. 97. OT Equator Tools MT-LM005 Long motor adapter for 0.05 hex. OT Equator Abutments Ø2.5mm MT-SM005 Short motor adapter for 0.05 hex. Ø2.5mm 1.7mm 1.7mm 2mm 1mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Ø2.5mm Ø2.5mm 1.7mm 1.7mm 4mm OE-RSM60 3mm OT Equator analog OE-IC001 OT Equator tear off impression transfer cap Ø2.5mm OE-IC002 OT Equator impression coping cap 1.7mm 5mm ET-IT001 OT Equator handling tools
  98. 98. 98. 1 MD-S0220 2 MD-IN060 3 MM-SIZW6 STANDARD Non-Cemented Zircon Prosthetic Abutments 5 Zircon incisor 15º abutment set int. hex., SP 1 MD-S0220 2 MD-IN060 3 1 MD-S0220 2 MK-SIZ6 MM-SIZW6 Direct prosthetic screw internal hex. Incisor esthetic Ti abutment internal hex., SP Incisor white zircon crown, SP/NP MD-CIZ60 STANDARD Pre-Cemented Zirconia Prosthetic Abutments 5 Zircon cemented incisor 15º abutment set int. hex., SP 1 MD-S0220 2 MD-CIZ60 Direct prosthetic screw internal hex. Incisor TiZi abutment int. hex., SP MK-SIC6
  99. 99. STANDARD Zircon Abutment Kits Kit Options: } MK-SIC6 Zircon cemented incisor 15º abutment set int. hex., SP MK-SIZ6 Zircon incisor 15º abutment set int. hex., SP Zircon cemented incisor 15º abutment set int. hex., SP Zircon incisor 15º abutment set int. hex., SP 8.5mm 2mm Zirconia abutments cannot be purchased separately. They are provided a direct prosthetic screw internal hex. (MN-S0160). 1mm
  100. 100. 100. 1 MD-S0220 2 MD-PM040 3 MM-SPZW4 STANDARD STANDARD Non-Cemented Zircon Prosthetic Abutments 5 Custom premolar abutment set int. hex. connection, SP 1 MD-S0220 2 MD-PM040 3 1 MD-S0220 2 MK-SPZ4 MM-SPZW4 Direct prosthetic screw internal hex. Premolar esthetic Ti abutment internal hex. connection, SP Premolar white zirconia crown, SP MD-CPZ40 STANDARD Pre-Cemented Zircon Prosthetic Abutments Zirconia cemented premolar abutment set int. hex., SP 1 MD-S0220 2 MD-CPZ40 MK-SPC4 Direct prosthetic screw internal hex. Premolar TiZi abutment int. hex., SP
  101. 101. STANDARD Zircon Abutment Kits Kit Options: } MK-SPZ4 Custom premolar abutment set internal hex. connection, SP MK-SPC4 Zircon cemented premolar. abutment set internal hex., SP Zircon cemented premolar abutment set internal hex., SP 8.4mm Custom premolar abutment set internal hex. connection, SP 2.7mm Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220). 1.8mm
  102. 102. 102. 1 3 MM-IT450 MA-RSM10 STANDARD Multi-Unit System 1.5:1 2 MM-IO450 1.5:1 4 MT-MUK02 1 1.5:1 MM-IT450 3 Multi-Unit impression coping for closed tray 1:1 Multi-Unit abutment analog Material: Stainless steel Dimensions: Length - 8mm 2 MA-RSM10 Material: Stainless steel Dimensions: Length - 12mm MM-IO450 4 MT-MUK02 Multi-Unit impression coping for open tray Multi-Unit key Material: Stainless steel Dimensions: Length - 10mm Material: Stainless steel Dimensions: Length - 22mm MT-MUK02 Multi-Unit key
  103. 103. 1 8 MA-S1375 MM-CP045 STANDARD 1.5:1 2 MA-S2375 Multi-Unit System 1.5:1 9 MM-T0450 10 MM-MG450 1.5:1 3 1.5:1 MA-S3375 1 1:1 11 2 MM-BGC45 12 MM-S0330 Material: Burnout plastic Dimensions: Length - 10mm MA-S2375 9 MA-S3375 MM-T0450 Multi-Unit Titanium temporary cylinder Material: Titanium Dimensions: Height -2mm 30-35 Ncm 3 MA-ANH17 Material: Titanium Dimensions: Length - 10mm 10 MM-MG450 Multi-Unit abutment 3mm, SP MM-G0330 Multi-Unit direct gold Material: Titanium Dimensions: Height -3mm 30-35 Ncm 1.5:1 13 Multi-Unit plastic cylinder Multi-Unit abutment 2mm, SP 1.5:1 5 MM-CP045 Material: Titanium Dimensions: Height -1mm 30-35 Ncm MA-S4375 1.5:1 8 Multi-Unit abutment 1mm, SP 1.5:1 4 MA-S1375 Material: Burnout plastic+ gold -a Dimensions: Length - 14.5mm 1.5:1 6 1.5:1 MA-ANH30 4 MA-S4375 11 Multi-Unit abutment 4mm, SP MM-BGC45 Multi-Unit bar gold coping Material: Titanium Dimensions: Height -4mm 30-35 Ncm Material: Gold-e Dimensions: Length - 3.3 mm 1.5:1 7 5 MH-00450 MA-ANH17 12 Material: Titanium Dimensions: Length - 3.8mm 25 Ncm Material: Titanium 1.5:1 6 MA-ANH30 Multi-Unit 30deg. angulated abutment with hex. Material: Titanium 7 MH-00450 Multi-Unit healing cap Material: Titanium Dimensions: Length - 3.3mm MA-ANH30 Multi-Unit 30deg. angulated abutment with hex. MM-S0330 Multi-Unit direct prosthetic screw Multi-Unit 17deg. angulated abutment with hex. 13 MM-G0330 Multi-Unit direct prosthetic gold screw Material: Gold Dimensions: Length - 3.8mm 20 Ncm
  104. 104. 104. 17° 30° 15° 1.2mm 15° Multi-Unit Angulated 2.6mm 1.2mm 3.2mm 1.3mm 1mm MA-ANH17 MA-ANH30 Solutions for extreme situations 64° ^ ^ 30° ^ ^ Straight Multi-Unit abutments can be used with implants with divergence of up to 30º. 17º Multi-Unit abutments can be used with implants with divergence of up to 64º. Clinical summary Place Multi Unit angulated abutment (17°/30°) on the implant with the assistance of the gripping bar. To screw the abutment to the implant, position the Multi-Unit key (MTMUK02) through the gripping bar’s opening. Recommended tightening moment is 30 Ncm. ^ ^ 90° 30º multi unit abutments can be used with implants with divergence of up to 90º.
  105. 105. 1 6 MB-N1375 MB-AN152 STANDARD Ball Attachments 1.5:1 2 1.5:1 MB-N2375 7 MB-AN252 1.5:1 3 MB-N3375 1.5:1 8 1 MB-N1375 6 MB-RS375 MB-AN152 Ball anchor 15 deg. angulated abutment Ball attachment anchor internal hex. 1mm, SP Material: Titanium Material: Titanium Dimensions: Height - 1mm 1.5:1 4 MB-N4375 1:1 9 2 MB-N2375 7 Ball attachment anchor internal hex. 2mm, SP MT-NB225 Ball anchor 25 deg. angulated abutment Material: Titanium Dimensions: Height - 2mm 1.5:1 5 3 MB-N3375 Material: Titanium 8 Ball attachment anchor internal hex. 3mm, SP MB-N5375 1:1 MB-N4375 Ball attachment anchor internal hex. 4mm, SP Material: Titanium Dimensions: Height - 4mm 5 MB-RS375 Ball attachment analog internal hex. Material: Titanium Dimensions: Height - 3mm 4 1.5:1 MB-AN252 Material: Stainless steel Dimensions: Length - 15.1mm 9 MT-NB225 Ball attachment anchor key Material: Stainless steel Dimensions: Length - 22mm MB-N5375 Ball attachment anchor internal hex. 5mm, SP Material: Titanium Dimensions: Height - 5mm Ø2.25mm 2.6mm Gingival height 1,2,3,4,5mm MB-N3375 Ball attachment anchor internal hex. 3mm Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
  106. 106. 106. 1 1 7 MB-SF200 MT-TSD10 STANDARD MB-PPR10 1.5:1 2 2 MB-GPS10 2:1 Angulated Ball Attachments MB-DB235 1.5:1 3 1:2 MB-TTP10 1:1 3 MB-PPC10 4 MB-DMH10 MB-PR010 4 8 MB-TTP10 1.5:1 1 MB-TBS10 5 MB-PR010 2:1 6 9 MB-TBS20 2 10 Screw driver for titanium ball cap Material: Stainless steel Dimensions: Length - 60mm MB-GPS10 8 MB-DMH10 Double metal housing Gold ball cap MB-PPR10 3:1 1.5:1 MT-TSD10 MB-PPC10 2:1 1.5:1 7 Material: Plastic Dimensions: Length - 3.5mm 1:1 1.5:1 5 MB-SF200 Plastic ball cap 2:1 Material: Gold-e Dimensions: Length - 2.4mm 2:1 11 3 MB-DB235 MB-TTP10 9 MB-PPC10 Titanium ball cap Standard plastic cap for metal housing Material: Titanium Dimensions: Length - 3.1mm Material: Plastic Dimensions: Length - 2.6mm Retention 1200-1300g 1:1 4 MB-PR010 10 MB-PPR10 Plastic mounting sleeve Material: Plastic Dimensions: Length - 2mm Diameter - 3.8mm 5 Soft plastic cap for metal housing Material: Plastic Dimensions: Length - 2.6mm Retention 800-950g MB-TBS10 Titanium ball cap spring standard Material: Steel Dimensions: Diameter - 2.50mm 6 11 MB-DB235 Plastic disc for ball attachment Material: Plastic Dimensions: Diameter - 15mm MB-TBS20 Titanium ball cap spring soft Material: Steel Dimensions: Diameter - 2.60mm MB-DB235 Plastic disc for ball attachment
  107. 107. Angulated Ball Attachments 15° Ø4 Ø4.6 Ball Ø2.25 25° 3mm 3.5mm 1.7mm 1.7mm MB-AN152 MB-AN252 50° ^ ^ ^ ^ Place the ball anchor angulated abutment (15°/25°) on the implant by the gripping bar. To screw the abutment to the implant, position the hand hex. driver (MT-HHR13) through the gripping bar opening. Recommended tightening moment is 30 Ncm. ^ Clinical summary 25° 25° ^ ^ ^ 15º ball attachments can be used with implants with divergence of up to 30º. ^ ^ 15° 15° ^ 30° ^ Solutions for extreme situations .6 Ball Ø2.25 25º ball attachments can be used with implants with divergence of up to 50º.
  108. 108. 108. 1 8 MB-SZL00 MM-LCT10 STANDARD 1:1 2 Locator Attachment System MB-SZL01 1:1 3 MB-SZL02 1:1.5 9 MM-LMP02 1 1:1 4 MB-SZL03 10 2 MB-SZL01 Material: Steel Titanium Nitride coated Ti 9 Locator abutment 1mm hgt., Standard platform MM-LFA40 6 MB-SZL05 1:1.5 3 MB-SZL02 Material: Steel/ Nylon Dimensions: Length - 1.80mm Titanium Nitride coated Ti 10 Locator abutment 2mm hgt., Standard platform Material: Aluminum polyethylene Dimensions: Length - 4.50mm Diameter - 4.70mm Material: Titanium Nitride coated Ti Dimensions: Height - 2mm MB-SZL06 4 MB-SZL03 Locator abutment 3mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 3mm 1:1 5 MM-LIC10 Locator impression coping (4 Pack) 1:1 7 MM-LMP02 Locator male processing package (2 Pack) Material: Titanium Nitride coated Ti Dimensions: Height - 1mm 1:1 MM-LCT10 Locator core tool Material: Titanium Nitride coated Ti Dimensions: Height - 0mm 1:1.5 11 MB-SZL04 8 MM-LIC10 1:1 5 MB-SZL00 Locator abutment 0mm hgt., standard platform 1:1.5 11 MM-LFA40 Locator female analog 4mm dia. (4 Pack) Material: Aluminum polyethylene Dimensions: Length - 10.40mm Diameter - 4mm MB-SZL04 Locator abutment 4mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 4mm 6 MB-SZL05 Locator abutment 5mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 5mm 7 1.78mm Gingival height 0-6mm MB-SZL06 Locator abutment 6mm hgt., Standard platform Material: Titanium Nitride coated Ti Dimensions: Height - 6mm *Note: Locator selection should be based on gingival height MB-SZL03 3mm Locator Standard abutment Although the visual features a SEVEN implant, the abutment fits all Standard MIS internal hex. implants.
  109. 109. 1 6 MM-LRM10 MM-LPP10 STANDARD 1:1 2 7 MM-LLR10 2 1:1 8 Locator Attachment System MM-LBP10 MM-LSD15 MM-LRM10 1:1 1:1 3 MM-LEL10 3 1:1 MM-LLR10 1 1:1 4 MM-LER10 4 1:1 MM-LEL10 5 MM-LELE1 5 9 MM-LSD21 2 1:1 MM-LER10 MM-LLR10 Material: Polyethylene black Dimensions: Length - 15mm Diameter - 4.60mm 7 Material: Nylon pink Dimensions: Length - 1.80mm Diameter - 4.70mm 3 MM-LELE1 MM-LEL10 MM-LBP10 Locator black processing replacement male (4 Pack) (4 Pack) 0°-10°*, 3 lbs**, 1.36 kg 1:1 MM-LPP10 Locator parallel post (4 Pack) Locator light retention 1:1 6 6 Material: Nylon Material: Aluminum Dimensions: Length - 1.80mm Dimensions: Length - 10.40mm Diameter - 4.70mm Diameter - 4mm 1.5:1 1:1 MM-LRM10 MM-LFA40 Locator female analog 4mm Locator replacement male clear (4 Pack) Pack) 5 lbs**, 2.27 kg dia. (4 0°-10°*, Material: Polyethylene black Dimensions: Length - 1.80mm Diameter - 4.60mm 8 MM-LSD15 Locator extra light retention Locator torque wrench driver short Material: Nylon blue Dimensions: Length - 1.80mm Diameter - 4.70mm Material: Stainless steel Dimensions: Length - 15mm (4 Pack) 0°-10°*, 1.5 lbs**, 0.68 kg 1.5:1 1:1 4 MM-LER10 9 MM-LSD21 Locator extended range (4 Pack) Locator torque wrench driver long Material: Nylon green Dimensions: Length - 1.80mm Diameter - 4.70mm Material: Stainless steel Dimensions: Length - 21mm 10°-20°*, 3-4 lbs**, 1.36-1.82 kg 5 MM-LELE1 Locator extra-light extended (4 Pack)10°-20°*, 1.5 lbs**, 0.68 kg Material: Nylon red Dimensions: Length - 1.80mm Diameter - 4.70mm * For the correction of the axes divergences for one implant ** Retention strength
  110. 110. 110. MW-IT300 Direct impression coping for closed tray internal hex., WP
  111. 111. 1 5 MW-I0470 MW-IT300 WIDE Analog and Impression Copings 1.5:1 6 MW-PF550 1.5:1 2 MD-G0213 1 MW-I0470 5 Impression coping for open tray internal hex. WP 2:1 7 Direct impression coping for closed tray internal hex. WP Material: Stainless steel Dimensions: Height - 11mm MW-RSM10 2 MD-G0213 MW-IT300 Material: Titanium Dimensions: Height - 8mm 6 Direct impression coping guide pin internal hex. MW-PF550 Direct press fit for closed tray WP 1.5:1 3 Material: Titanium Dimensions: Length - 21.3mm 1.5:1 MW-IT100 3 MW-IT100 Impression coping for closed tray internal hex. WP Material: Stainless steel Dimensions: Height - 9mm 1.5:1 4 4 MD-GP100 Direct impression coping guide pin internal hex. MD-GP100 Material: Titanium Dimensions: Length - 16.5mm 1.5:1 MW-I0470 Impression coping for open tray internal hex., WP Material: Titanium Dimensions: Height - 11mm 7 MW-RSM10 Wide. implant analog internal hex. WP Material: Stainless steel Dimensions: Length - 12mm
  112. 112. 112. 1 MW-CPK61 2 MW-RSM60 3 MW-CHC60 WIDE CPK - Complete Prosthetic Kit MK-WPK61 5 4 MW-IC800 5 MW-IC040 6 MW-ICH40 1 MW-CPK61 2 MW-RSM60 3 MW-CHC60 4 MW-IC800 5 MW-IC040 6 MW-ICH40 Anatomic 1mm transgingival abutment, crown height 6mm, WP Wide abutment analog crown height 6mm, WP Wide plastic healing cap h. 6mm, WP Direct impression coping h. 8mm, WP Burnout plastic cap, WP Burnout anti-rotation plastic cap, WP MK-WPK61 1mm complete prosthetic kit, crown height 6mm, WP
  113. 113. WIDE CPK - Complete Prosthetic Kit } } } Kit Options: 1 6 MK-WPK43 MK-WPK44 MK-WPK61 6 MK-WPK62 6 MK-WPK63 6 MK-WPK64 6 MK-WPK81 6 MK-WPK82 6 MK-WPK83 6 C=8mm, H=1,2,3,4mm 6 6 C=6mm, H=1,2,3,4mm MK-WPK42 6 C=4mm, H=1,2,3,4mm MK-WPK41 MK-WPK84 1mm complete prosthetic kit, crown height 4mm, WP 2mm complete prosthetic kit, crown height 4mm, WP 3mm complete prosthetic kit, crown height 4mm, WP 4mm complete prosthetic kit, crown height 4mm, WP 1mm complete prosthetic kit, crown height 6mm, WP 2mm complete prosthetic kit, crown height 6mm, WP 3mm complete prosthetic kit, crown height 6mm, WP 4mm complete prosthetic kit, crown height 6mm, WP 1mm complete prosthetic kit, crown height 8mm, WP 2mm complete prosthetic kit, crown height 8mm, WP 3mm complete prosthetic kit, crown height 8mm, WP 4mm complete prosthetic kit, crown height 8mm, WP C=Crown Height H=Gingival Height Anatomic transgingival abutment, WP C H All CPK abutments can be purchased separately. They are provided with a burnout anti-rotation plastic cap (MW-ICH40). MW-CPK41* C=4mm, MW-CPK42* H=1,2,3,4mm MW-CPK43* MW-CPK44* MW-CPK61* C=6mm, MW-CPK62* H=1,2,3,4mm MW-CPK63* MW-CPK64* MW-CPK81* C=8mm, MW-CPK82* H=1,2,3,4mm MW-CPK83* MW-CPK84*
  114. 114. 114. 1 8 MW-CPH13 MW-TPA12 WIDE Direct, Screw Retained Restoration Options 1.5:1 2 MW-CP013 1.5:1 9 MD-G0220 10 MD-S0200 1.5:1 1.5:1 3 1 2 MD-S0220 Material: Peek Dimensions: Height - 11mm Diameter - 4.50mm MW-CP013 1.5:1 MD-S0222 9 3 MW-CPH60 Material: Gold-s Dimensions: Length - 7.7mm 20 Ncm 10 Direct plastic cylinder with hex. dia.6mm WP 1.5:1 5 1.5:1 13 4 MW-CP060 Direct plastic cylinder without hex. dia. 6mm, WP MD-S0224 Material: Titanium Dimensions: Length - 6.9mm 30 Ncm 11 5 MW-TPH50 MD-S0220 Direct prosthetic screw internal hex. Material: Burnout plastic Dimensions: Height - 11mm Diameter - 6.50mm 1.5:1 MD-S0200 Mini prosthetic screw internal hex. Material: Burnout plastic Dimensions: Height - 11mm Diameter - 6.50mm MW-TPH50 MD-G0220 Direct gold prosthetic screw internal hex. Material: Burnout plastic Dimensions: Height - 11mm Diameter - 4.50mm 1.5:1 12 Narrow profile temporary plastic abutment, WP Wide dia. plastic cylinder without hex. internal hex. MW-CP060 MW-TPA12 Material: Burnout plastic Dimensions: Height - 11mm Diameter - 4.50mm 1.5:1 4 8 Wide dia. plastic cylinder with hex. internal hex. MW-CPH60 11 MW-CPH13 Material: Titanium Dimensions: Length - 7.6mm 30 Ncm 12 MD-S0222 MW-GPC10 6 Medium prosthetic screw internal hex. Material: Peek Dimensions: Height - 12mm Diameter - 5.50mm 6 Wide direct temporary plastic cylinder internal hex. 1.5:1 Material: Titanium Dimensions: Length - 11.7mm 30 Ncm MW-GPC10 Wide gold plastic cylinder with hex. internal hex. Material: Burnout plastic + Gold-a Dimensions: Height - 15mm Diameter - 5.50mm 1.5:1 7 MW-GP010 7 MW-GP010 Direct gold abutment without hex. WP Material: Burnout plastic + Gold-a Dimensions: Height - 15mm Diameter - 5.50mm 1.5:1 The ”functional height“ of all abutments is measured from the platform connection and does not include the Internal hex. connection. Please note: PEEK abutments are radiolucent! 13 MD-S0224 Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 13.8mm 30 Ncm
  115. 115. 1 3 MW-MAC10 MW-WMAC1 WIDE Cemented Restoration Options 1.5:1 2 1.5:1 4 MW-CTP10 1.5:1 MW-TPA10 1.5:1 1 MW-MAC10 3 Wide platform cementing post Wide profile cementing post for WP Material: Titanium Dimensions: Height - 11mm Diameter - 5.5mm 2 MW-CTP10 Direct conical titanium post for WP Material: Titanium Dimensions: Height - 8.5mm Diameter - 5.5mm MW-MAC10 Wide platform cementing post MW-WMAC1 Material: Titanium Dimensions: Height - 11mm Diameter - 6.5mm 4 MW-TPA10 Temporary plastic abutment, WP Material: Peek Dimensions: Height - 11mm Diameter - 5.5mm
  116. 116. 116. 1 5 MW-AN151 MD-S0200 WIDE Direct, Cemented Restoration Options 1.5:1 MD-S0220 7 1.5:1 2 6 MD-S0222 MW-P0010 1.5:1 1 1.5:1 MW-AN151 5 MD-S0200 Mini prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm 3 Wide 15º angulated abutment internal hex. MW-P1510 Material: Titanium Dimensions: Length - 6.90mm 30 Ncm 1.5:1 8 MD-S0224 2 1.5:1 4 MW-P0010 6 Wide esthetic abutment internal hex. 1mm MD-G0220 Direct prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm 1.5:1 1.5:1 3 MW-P1510 Material: Titanium Dimensions: Length - 7.60mm 30 Ncm 7 Wide esthetic 15º angulated abutment internal hex. 1mm MD-G0220 Direct gold prosthetic screw internal hex. Material: Gold-s Dimensions: Length - 7.70mm 20 Ncm MW-P1510 Wide esthetic 15 angulated abutment internal hex. 1mm MD-S0222 Medium prosthetic screw internal hex. Material: Titanium Dimensions: Height - 9mm 4 MD-S0220 Material: Titanium Dimensions: Length - 11.7mm 30 Ncm 8 MD-S0224 Long prosthetic screw internal hex. Material: Titanium Dimensions: Length - 13.8mm 30 Ncm
  117. 117. Esthetic abutments 0º Ø4.30mm 8mm 1mm Ø6.30mm MW-P0010 Esthetic angulated abutments 15º Angulated abutments 15º Ø4mm 9mm 9mm 4.50 4.50 1mm 2.90 2.90 Ø4.50mm Ø4.50mm MW-AN151 MW-P1510 Standard abutments 11mm 11mm 8.5mm Ø4.50mm MW-CTP10 Ø4.50mm Ø5.50mm Ø4.50mm Ø6.50mm MW-MAC10 MW-WMAC1
  118. 118. 118. 1 MD-S0220 2 MW-TB001 3 MW-RSM10 WIDE CAD/CAM Ti Base Kit - Single Tooth Restoration 5 4 Hexagon Connection MK-TBW4 (with anti-rotational mechanism) GI-WCH11 1 MD-S0220 2 MW-TB001 3 MW-RSM10 4 GI-WCH11 Direct prosthetic screw internal hex. Ti Base internal hex. connection for CAD/CAM, Wide platform Implant analog internal hex. Wide platform Burnout anti-rotation plastic cap for Ti Base, Wide platform Hex. MK-TBW4 Ti Base Kit h. 4mm for internal hex. connection, WP For Laboratory Use Only! Scan abutment MW-SP001 Scanning abutment internal hex. connection, Wide platform MD-S0220 Direct prosthetic screw internal hex.
  119. 119. 1 2 MD-S0220 MW-TB002 3 MW-RSM10 WIDE CAD/CAM Ti Base Kit Multi-Unit Restoration 5 4 Non Hexagon Connection MK-MUW4 (without anti-rotational mechanism) GI-WCH11 1 MD-S0220 2 MW-TB002 3 MW-RSM10 4 GI-WCH11 Direct prosthetic screw internal hex. Multi-Unit Ti Base internal hex. connection, Wide platform Implant analog internal hex. Wide platform Burnout anti-rotation plastic cap for Ti Base, Wide platform Non-Hex. MK-MUW4 Multi-Unit Ti Base kit h. 4mm internal hex. connection, WP For Laboratory Use Only! Scan abutment MW-SP001 Scanning abutment internal hex. connection, Wide platform MD-S0220 Direct prosthetic screw internal hex.
  120. 120. 120. 120. WIDE OT Equator kit Kits Laboratory Use: Metal housing H=1,3,5mm OT Equator laboratory cap (black) } Options: MK-WOE1 OT Equator internal hex. kit, gingival height 1mm, WP MK-WOE3 OT Equator internal hex. kit, gingival height 3mm, WP MK-WOE5 OT Equator internal hex. kit, gingival height 5mm, WP Clinical Use: Metal housing Extra soft retention (yellow) OT Equator cap (0.6kg) OE-RCY01 Soft retention (pink) OT Equator cap (1.2kg) OE-RCP01 Standard retention (white) OT Equator cap (1.8kg) OE-RCW01 High retention (violet) OT Equator cap (2.7kg) OE-RCV01 2.6mm 1.9mm OT Equator retention caps may be purchased separately. Equator Ball Attachment
  121. 121. OT Equator Tools MT-LM005 Long motor adapter for 0.05 hex. MT-SM005 OT Equator Abutments Ø2.5mm Short motor adapter for 0.05 hex. 1.9mm 1mm MT-SRA10 Square connection to ratchet adapter MT-SHA10 Hand wrench square connection Ø2.5mm 1.9mm 3mm OE-RSM60 OT Equator analog OE-IC001 OT Equator tear off impression transfer cap Ø2.5mm OE-IC002 OT Equator impression coping cap 1.9mm 5mm ET-IT001 OT Equator handling tools
  122. 122. 122. 1 MD-S0220 2 MW-PM040 3 MM-WPZW4 WIDE Pre-Cemented Zircon Prosthetic Abutments 5 Custom premolar abutment set internal hex. connection, WP 1 MD-S0220 2 MW-PM040 3 1 MD-S0220 2 MK-WPZ4 MM-WPZW4 Direct prosthetic screw internal hex. Premolar esthetic Ti abutment internal hex. connection, WP Premolar white zirconia crown, WP MW-CPZ40 WIDE Pre-Cemented Zircon Prosthetic Abutments Zirconia cemented premolar abutment set int. hex., WP 1 MD-S0220 2 MW-CPZ40 MK-WPC4 Direct prosthetic screw internal hex. Premolar TiZi abutment int. hex., WP
  123. 123. WIDE Zirconia Abutment Kits Kit Options: } MK-WPZ4 Custom premolar abutment set internal hex. connection, WP MK-WPC4 Zircon cemented premolar. abutment set internal hex., WP Zirconia cemented incisor abutment set internal hex., WP 8.4mm Custom premolar abutment set int. hex. connection, WP 2.7mm Zirconia abutments cannot be purchased separately. They are provided with a direct prosthetic screw internal hex. (MD-S0220). 1.8mm
  124. 124. 124. 1 5 MM-IT450 MA-W2500 WIDE Multi-Unit System 1.5:1 1.5:1 MA-W3500 7 2 6 MA-W4500 MM-IO450 1.5:1 1 MA-W2500 1.5:1 2 Wide platform Multi-Unit abutment 2mm Material: Stainless steel Dimensions: Length - 8mm MA-RSM10 8 Material: Titanium Dimensions: Height-2mm 30-35 Ncm MM-IO450 6 MA-W3500 Multi-Unit impression coping for open tray Wide platform Multi-Unit abutment 3mm Material: Stainless steel Dimensions: Length - 10mm MM-T0450 1.5:1 4 5 Multi-Unit impression coping for closed tray 1.5:1 3 MM-IT450 Material: Titanium Dimensions: Height - 3mm 30-35 Ncm MA-W1500 1.5:1 3 MA-RSM10 7 MA-W4500 Multi-Unit abutment analog Material: Stainless steel Dimensions: Length - 12mm 1.5:1 4 Wide platform Multi-Unit abutment 4mm Material: Titanium Dimensions: Height - 4mm 30-35 Ncm MA-W1500 8 MM-T0450 Wide platform Multi-Unit abutment 1mm Material: Titanium Dimensions: Height- 1mm 30-35 Ncm MM-T0450 Multi-Unit temporary cylinder Multi-Unit temporary cylinder Material: Titanium Dimensions: Length - 10mm

×