Rfid based remote parent care (rfid & gsm)

  • 662 views
Uploaded on

For more projects visit @ www.nanocdac.com

For more projects visit @ www.nanocdac.com

More in: Technology , Business
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
No Downloads

Views

Total Views
662
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
0
Comments
0
Likes
1

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. RFID Based REMOTE PARENT CARE (RFID & GSM)ABSTRACT:The main objective of this project is to develop an embedded system, which isused to parent care, and verify and authenticate the authorized.This project is implemented 8051 based Atmel/AVR-Atmega16 developed boardinterfaced with RFID, Keypad, buzzer and LCD, GSM.RFID sensors continuously detects the RF Signals .When an RF signal (RFIDTag) is near to the RFID sensor it receives data from the RFID tag. In this tag we store,predefine program for Student name and details. When the card is matching at the RFIDsensors the student is enter into college and second time leave information can be send tothe particular parent by sms using GSM.Whenever the student enters into the college, he has to keep his RFID Tag tothe reader which is attached to our microcontroller based embedded System. At thatmoment the reader will checks weather the information of the student is correct or notand then it will decide whether he is entry or leave. If the information of the student iscorrect then he will be permitted inside otherwise he will not permit inside and switcheson the buzzer. The information of the student will be send to the parent through one wireprotocol GSM. And the information of the access system will be displayed on the LCDwhich we embedded to our board.This project uses regulated 5v, 750ma power supply. 7805 three terminal voltageregulator is used for voltage regulation. Bridge type full wave rectifier is used to rectifythe ac output of secondary of 230/18v step down transformer.WWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPUR
  • 2. Block diagram:WWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPURMicrocontrollerBuzzerLCD DisplayRFIDREADERRelayAccess led(Green)KeypadDeny led(Red)ResetBuzzerGSMMax232RFIDTAGMAX232
  • 3. Power supply:SOFTWARE: EMBEDDED ‘C’ RIDE TO WRITE CODE ISP TO BURN THE CHIP KEIL COMPILER. AVR STUDIO4HARDWARE: AT89S52/AVR, BASED OUR OWN DEVELOPED BOARD POWER SUPPLY RFID READER RFID TAG KEY PAD LCD DISPLAY RELAYWWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPURStepDownT/FBridge FilterVoltageRegulator
  • 4.  INDICATORS BUZZER MAX 232 GSM MODULE SERIAL COMMUNICATIONAdvantages: Low Cost Automated operation low power consumption very flexible Easy To Manufacture.Applications: Industrial management Office management Home applicationsWWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPUR
  • 5. WWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPUR
  • 6. WWW.NANOCDAC.COM WWW.NSRCNANO.COM BRANCHES: HYDERABAD NAGPUR