How Model Train Track Works And What Can Go Wrong
Model train track consists of two metal rails separated by plastic tie sections. Each rail carries one side
of the electrical circuit. To work properly, the two rails should not contact each other and no metal
object should contact both rails together. This would cause a short circuit, which could damage your
model train power pack if it happened too often.
With this in mind, assemble your model train track and connect the power pack... and you'll be ready to
start operating your model trains. It is as easy as plugging in the power pack, carefully placing the
locomotive on the train track, turning up the throttle...and enjoying!
More About Model Train Tracks
It's best to set up your train track on a sheet of plywood, a tabletop, or other hard surface. Carpet fuzz
and floor dirt can hamper smooth train operation.
Model train track comes in different types made of brass, zinc­coated steel, nickel silver and steel.
Regardless of what the train tracks are made of, most track sets come with a terminal section so that
you can hook into the transformer. Brass track and zinc­coated steel track are common in starter sets
and, when purchased separately, are usually cheaper in price than nickel silver tracks.
For more information on Model Train Track Works read the best­selling Model Train Help ebook.