MAY 2010
MOX-LT HOME AUTOMATION SYSTEM
MOX Home Automation designs and manufactures an ever expanding range of intelligent
home and building automation products....
MOX Home Automation Overview
The home is now a place that demands a level of technology
previously only dreamt about.
More...
Customer Benefits
 Increase property value
 Deliver superior levels of sophistication and quality to users
High-quality
...
Features
 Stable Structure
 Modular Design
 Advanced Solution
 Integrated System
LT HOME AUTOMATION
CONVENIENCE
LUXURY...
System Overview
Comfort
Power
Lighting
Curtain
Air Conditioning
Audio
Video
Irrigation
Recycle
Pool
SecurityConvenience Lu...
System Overview
RF Interface
Auto-lighting
Monitoring
Access Control
Video Phone
Electronic Lock Climate Control
Display T...
System Overview
Curtain Controller
Door Module
Graphic User Controller
Infrared Controller
Industrial Switch
Single Gang
L...
System Function
 Individual operation of a light including
On/Off and dimming.
 Scene operation of a bank of lights
incl...
System Function
 Individual operation of a curtain
including Open/Closed and any
position in between.
 Scene operation o...
System Function
 System Run – turns the entire air-
conditioning system ON or OFF
 System Fan – selects fan speed: Low,
...
System Function
 Track selection
 Previous and next song
selection
 As easy and convenient to
use as a light switch
 A...
System Function
 Send SMS to predefined telephone
numbers
 Activate lighting and door locks
 Activate sirens and emerge...
System Function
 Pool and spa control
 Irrigation control
 Water reservoir control
Water Control
System Structure
Fully software management
Digital technology
Home facility control
Management
TCP/IP Ethernet communicati...
System Structure
The MOX LT Home Automation solution is
designed to provide a level of home
automation that matches the li...
System Structure
The MOX LT Enhanced Automation
solution is more sophisticated and is
designed to provide an elite level o...
LT Product Introduction
Graphic User Interface
Opal ComPlate
Switch Controller
MOX Home Automation Products
Dimmer Control...
LT Product Introduction
Palladium Graphic User Interface
Technical Data
• Voltage: 16VDC~26VDC
(Static)2W, (Max)5.5W
• Dig...
LT Product Introduction
Palladium Graphic User Interface
With Controller
Technical Data
• Power Supply
Voltage: 16VDC ~ 26...
LT Product Introduction
Opal ComPlate The two typical applications of scene control by the ComPlate via “IRIS
Config” are ...
LT Product Introduction
Switch Controller The 86 Switch Controller Plate can control the output port by use of either the
...
LT Product Introduction
Dimmer Controller The Dimmer Controller Plate can control the brightness of incandescent
lamps, en...
LT Product Introduction
Curtain Controller
Technical Data
• Voltage requirement: 220VAC – 240VAC
• Static power consumptio...
LT Product Introduction
Infrared Controller
Technical Data
• Voltage requirement: 220VAC – 240VAC
• Static power consumpti...
LT Product Introduction
Data Processor Devices
Ethernet/CAN
Gateway Module
Rack Base I/O
Power Module
Ethernet Switch
Tele...
LT Product Introduction
Data Processor Devices
Standalone I/O Module
Rack Base I/O Module
8 Channel DI 8 Channel DO 8 Chan...
LT Product Introduction
CAN BUS Gateway The CAN Bus Gateway is used to realize the connection between Ethernet
equipment a...
LT Product Introduction
Telephone Gateway
Technical Data
• Power Dissipation: 24VDC
• RJ11 port x 2: Line in x 1, Phone po...
LT Product Introduction
Industrial Switch
Technical Data
• Power Dissipation: 9~72VDC
• RJ45 port (10/100 Base T) x 8/15, ...
LT Product Introduction
IoNix Home Facility Controller
Technical Data
• Power supply (to MOX603-4001): External 24Vdc
supp...
LT Product Introduction
8 Channel DI
Technical Data
• Power Dissipation: 24VDC
• Input Specifications:
Number of channels:...
LT Product Introduction
8 Channel DO
Technical Data
• Power Dissipation: +24VDC
• Output Specifications:
Number of channel...
LT Product Introduction
8 Channel AI
Technical Data
• Power Dissipation: +24VDC
• Input Specifications:
Number of channels...
LT Product Introduction
8 Channel AO
Technical Data
• Power Dissipation: +24VDC
• Output Specifications:
Number of channel...
LT Product Introduction
16 Channel DI
Technical Data
• Voltage Requirement: +5VDC
• Input Specifications:
Number of channe...
LT Product Introduction
12 Channel DO
Technical Data
• Power Dissipation: +5VDC
• Output Specifications:
Number of channel...
LT Product Introduction
12 Channel AI
Technical Data
• Power Dissipation: +5VDC
• Input Specifications:
Number of channels...
LT Product Introduction
8 Channel AO
Technical Data
• Power Dissipation: +5VDC
• Output Specifications:
Number of channels...
LT Product Introduction
Vision Editor Vision Editor is an advanced home automation and remote
access software package that...
Project References
Project 88 Lake Golf Residential Complex Jade Residential Complex
Project 88
Ability for any display to control any
door lock
TCP/IP Ethernet operation
Interface to the IoNix controller
Do...
Lake Golf Residential Complex
Ability for any display to control any
door lock
CAN BUS communications
Interface to the IoN...
Jade Residential Complex
Ability for any display to control any
door lock
TCP/IP communications
Interface to the IoNix con...
System Structure
RS-485 & CAN-BUS Comparison
Technology RS-485 CAN-BUS
Cost Low High
Web Feature Single Master Web Multi M...
System Structure
Technology Comparison
Technology X-10 Power Carrier Wireless RF CAN-BUS
User Population Big Small Big
Nee...
System Structure
System Comparison
Item Traditional Building Intelligence System MOX Home Automation System
Functions
Secu...
LT Product Introduction
MOX Home Automation Products
MOX Home
Automation
Products
CAN BUS
Opal ComPlate
I/O Module
Gateway...
MOX LT Home Automation
Upcoming SlideShare
Loading in...5
×

MOX LT Home Automation

3,396

Published on

MOX Home Automation designs and manufactures an ever expanding range of intelligent home and building automation products.
For more information, please visit www.mox.com.au

Published in: Technology, Business
0 Comments
2 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
3,396
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
0
Comments
0
Likes
2
Embeds 0
No embeds

No notes for slide

Transcript of "MOX LT Home Automation"

  1. 1. MAY 2010 MOX-LT HOME AUTOMATION SYSTEM
  2. 2. MOX Home Automation designs and manufactures an ever expanding range of intelligent home and building automation products. Introduction
  3. 3. MOX Home Automation Overview The home is now a place that demands a level of technology previously only dreamt about. More and more people require their home security, visitor monitoring, access control, home automation and utilities management systems to be fully integrated. In community or apartment style living, this integration extends to centrally managed services. As these demands increase, so does the response by MOX Home Automation.
  4. 4. Customer Benefits  Increase property value  Deliver superior levels of sophistication and quality to users High-quality after-sales service Smart Home System Solutions Developers Owner Management High-quality products Services Smart homes Comfortable Safe Convenient
  5. 5. Features  Stable Structure  Modular Design  Advanced Solution  Integrated System LT HOME AUTOMATION CONVENIENCE LUXURY SECURITYCOMFORT
  6. 6. System Overview Comfort Power Lighting Curtain Air Conditioning Audio Video Irrigation Recycle Pool SecurityConvenience Luxury Monitoring Information Community Metering Message Video Phone Lift Control Remote Control Car Park Fire Burglary Gas Leaking Access Control Emergency Navigation Lighting Climate Water Control Media Scene Software User Information System Functions
  7. 7. System Overview RF Interface Auto-lighting Monitoring Access Control Video Phone Electronic Lock Climate Control Display Temperature and Humidity ; Cooling and Heating Control Telephone Control Home Facility Control through Telephone Presence Detector Security Alarm Lighting Control Internet Control Home Automation Control through Internet Lighting Control Switch Control Scenes Monitoring Water System Irrigation Scenes Monitoring Pool Control Temperature Recycle Media Control Audio Video Air Conditioning Control Temperature Timing
  8. 8. System Overview Curtain Controller Door Module Graphic User Controller Infrared Controller Industrial Switch Single Gang Lighting Controller Ethernet/CAN Gateway I/O Module Communication Controller Double Gang Lighting Controller Dimmer Controller
  9. 9. System Function  Individual operation of a light including On/Off and dimming.  Scene operation of a bank of lights including On/Off and dimming.  Controlling the light levels from individual and groups of lights based on time of day, system conditions or external stimulus.  Setting predetermined light operation and levels. Allows the lighting and curtain systems to work together to achieve constant light levels. Lighting Control
  10. 10. System Function  Individual operation of a curtain including Open/Closed and any position in between.  Scene operation of a bank of curtains including Open/Closed and any position in between.  Controlling the curtain position for individual and groups of lights based on time of day, system conditions or external stimulus.  Setting predetermined curtain position. Allows the lighting and curtain systems to work together to achieve constant light levels. Curtain Control
  11. 11. System Function  System Run – turns the entire air- conditioning system ON or OFF  System Fan – selects fan speed: Low, Medium, High  System Mode – selects the mode of: Cool, Heat, Vent, Auto  Location temperature – the set temperature within each location can be specified and modified.  The individual location temperatures can be viewed. Air Conditioning Control
  12. 12. System Function  Track selection  Previous and next song selection  As easy and convenient to use as a light switch  Accessing media throughout the house Media Control
  13. 13. System Function  Send SMS to predefined telephone numbers  Activate lighting and door locks  Activate sirens and emergency lighting  Bring security screen on to touch screens  Graphical representation of alarm location  Configurable operations upon alarm activation  Key fob activation and deactivation of the system  Senor monitoring supports three level security: Alarm activation, Broken wire, Tamper Security Control
  14. 14. System Function  Pool and spa control  Irrigation control  Water reservoir control Water Control
  15. 15. System Structure Fully software management Digital technology Home facility control Management TCP/IP Ethernet communications CAN BUS communications Framework Simple system structure Simple installation Anti-jamming system capability Functions
  16. 16. System Structure The MOX LT Home Automation solution is designed to provide a level of home automation that matches the lifestyle requirements of apartment living, small villas or town houses. MOX LT Home Automation
  17. 17. System Structure The MOX LT Enhanced Automation solution is more sophisticated and is designed to provide an elite level of home automation and building intelligence for prestige apartments and large villas. MOX LT Enhanced Automation
  18. 18. LT Product Introduction Graphic User Interface Opal ComPlate Switch Controller MOX Home Automation Products Dimmer Controller Curtain Controller Infrared Controller
  19. 19. LT Product Introduction Palladium Graphic User Interface Technical Data • Voltage: 16VDC~26VDC (Static)2W, (Max)5.5W • Digital Output Parameters Quantity: 2 Min Load: 0.01mA/10mV Output Type: Relay Output Capacity: 1A/30VDC • Digital Input Parameters Quantity: 2 Input Type: Dry Contact • Security Zone Parameters Quantity: 8 Input Type: Dry Contact • Size LxWxH: 220×145×21mm • LCD Size: 7 Inches, Color Resolution: 800 ×480 • Environmental Specifications Working Temperature: 0°C ~ 50°C Store Temperature: -20°C ~ 70°C Humidity: 5 ~ 95%, Non-condensing The HMI is designed with powerful CPU. It can be used for various control requirements in the home such as security alarm management and lighting scene control.
  20. 20. LT Product Introduction Palladium Graphic User Interface With Controller Technical Data • Power Supply Voltage: 16VDC ~ 26VDC Static Power Dissipation: 2W Max Power Dissipation: 5.5W • Communication Port Ethernet Interfaces: 2 (10/100Mbps) RS485 Interface: 1 • Digital Output Parameters Quantity: 2 Minimum Loads: 0.01mA/10mV Output: Relay Output Capacity: 1A/30VDC • Digital Input Parameters Quantity: 2 Input: Dry Contact • Security Zone Parameters Quantity: 8 Input: Dry Contact • Size WxHxD: 220×145×21mm, 290x195x21mm • LCD Size: 7 Inch, Color Resolution: 800 ×480 • Environmental Specifications Working Temperature: 0°C ~ 50°C Storage Temperature: -20°C ~ 70°C Humidity: 5 ~ 95%, Non-condensing The HMI with an inbuilt Controller is based on a high performance CPU. It features a touch panel that can control modern living requirements, such as security alarm, smart light control etc.
  21. 21. LT Product Introduction Opal ComPlate The two typical applications of scene control by the ComPlate via “IRIS Config” are shown below: 1) Configured as a Two-Way controller plate: Working with a Switch Controller Plate or a Dimmer Controller Plate, the ComPlate can control ON/OFF lighting or dimming. Users can thus operate the same light from different points. 2) Configured as a Scene Controller Plate: The ComPlate can be configured to control any of the lights in the house. For example, by pressing only one button, the user can switch off all the lights in the house.Technical Data • Voltage requirement: 24VDC(120ComPlate) • Max power dissipation: 0.5W • Operating temperature: 0-50℃ • Storage temperature: -20-70℃ • Relative humidity: 5-95%, non condensable The Opal ComPlate is designed to send commands to other controller plates within the LT system (such as the Dimmer Controller Plate, the Curtain Controller Plate, the Switch Controller Plate and the Infrared Controller Plate).
  22. 22. LT Product Introduction Switch Controller The 86 Switch Controller Plate can control the output port by use of either the face plate button or from commands sent via the CAN Bus communication’s port. Upon receiving commands from CAN bus or button operation, the 86 Switch Controller Plate executes the commands, switching the load accordingly and then sends out the on/off status of the loads to other controllers on the CAN Bus. Technical Data • Voltage requirement: 220VAC – 240VAC • Maximum power consumption: 0.6W (single gang switch) / 1.2W (double gang switch) • LED indicator light: white colour; 1 lamp (single gang switch) / 2 lamps (double gang switch) • Load capacity: 604-2702-20 (single gang switch): 500W 604-2702-22 (single gang switch): 2000W 604-2702-21 (double gang switch): 500W/gang • Operating temperature: 0-50℃ • Storage temperature: -20-70℃ • Relative humidity: 5-95%, non condensable The 86 Switch Controller Plate is 86mm x 86mm and is available in two types - Single Gang Output and Double Gang Output. The single gang switch controller has two models supporting a maximum load capacity of 500w and 2000w. The double gang switch controller has a maximum of 500w for per gang.
  23. 23. LT Product Introduction Dimmer Controller The Dimmer Controller Plate can control the brightness of incandescent lamps, energy-saving lamps and halogen lamps etc. All these kinds of lamps should be compatible with phase-control dimmer technology. With commands from CAN bus or button operations by the ueser, the 86 Dimmer Controller Plate controls the brightness of the lights and then broadcasts the lights’ status to other controllers on the CAN bus. Dimming of light in the home automation hardware works in the following way; by changing the phase at which the silicon controlled rectifier (SCR) is triggered, at the touch of a button on the Dimmer Controller Plate, changes are made to the power duty cycle through the lights and therefore, the brightness of the lights changes accordingly. Technical Data • Voltage requirement: 220VAC – 240VAC • Static power dissipation: 1W • Max power dissipation: 5W (Single Gang Dimmer Controller Plate); 8W (Double Gang Dimmer Controller Plate) • LED indicator: white colour; 2 buttons (single channel dim switch) / 4 buttons (double channel dim switch) • Load Capacity: 400W (Single Gang Dimmer Controller Plate); each load <300W (Double Gang Dimmer Controller Plate) • Operating temperature: 0-50℃ • Storage temperature: -20-70℃
  24. 24. LT Product Introduction Curtain Controller Technical Data • Voltage requirement: 220VAC – 240VAC • Static power consumption: 1W • Storable infrared ray signal length: 250ms • Two buttons • Load capacity <80W • Operating temperature: 0-50℃ • Storage temperature: -40-85℃ • Relative humidity: 5-95%, non condensable Upon receiving the commands from CAN bus controller or local buttons, the Curtain Controller Plate controls (opens/closes) the electric curtain and then broadcast the curtain’s status to the other controllers on the CAN bus. The single Gang Curtain Controller Plate controls a single curtain motion.
  25. 25. LT Product Introduction Infrared Controller Technical Data • Voltage requirement: 220VAC – 240VAC • Static power consumption: 1.1W • Storable infrared ray signal length: 250ms • Storable infrared ray commands: >50 • Controllable distance: >5m • Carrier frequency: 25KHz~60KHz • Size : 86mm x 86mm • Operating temperature: 0-50℃ • Storage temperature: -40-85℃ • Relative humidity: 5-95%, non condensable The use of CAN BUS communications ensures a simple two wire daisy chained installation. The Infrared Ray Controller can control DVD, TV, air conditioning and other home facilities.
  26. 26. LT Product Introduction Data Processor Devices Ethernet/CAN Gateway Module Rack Base I/O Power Module Ethernet Switch Telephone Gateway Module IoNix Home Facility Controller Ethernet Switch
  27. 27. LT Product Introduction Data Processor Devices Standalone I/O Module Rack Base I/O Module 8 Channel DI 8 Channel DO 8 Channel AI 8 Channel AO Standalone I/O Base 16 Channel DI 12 Channel DO 12 Channel AI 8 Channel AI Standalone I/O Base
  28. 28. LT Product Introduction CAN BUS Gateway The CAN Bus Gateway is used to realize the connection between Ethernet equipment and CAN Bus equipment. It has two CAN ports and one Ethernet port. It broadcasts the data from the CAN Bus to the Ethernet equipment that is registered in the CAN Bus Gateway list, such as an HMI with controller. The CAN Bus Gateway can also bridge two CAN ports and exchange the data between the two CAN Bus networks. A picture of the CAN Bus Gateway is shown in the following figure. Technical Data • Power Dissipation: 16VDC ~ 26VDC • Static power consumption: <1W • Ethernet Interface: 10/100Mbps x 1, AUTO MDIX • CAN Bus Interface:125Kbps Baud Rate×2 buses, Maximum CAN nodes is 100 • Insulation: Ethernet to System: 1000Vrms CAN Bus to System: No • Protection: 24V Input Connection-Reverse Protection • Operating temperature: 0-50℃ • Storage temperature: -40-85℃ • Relative humidity: 5-95%, non condensable
  29. 29. LT Product Introduction Telephone Gateway Technical Data • Power Dissipation: 24VDC • RJ11 port x 2: Line in x 1, Phone port x 1 • Ethernet Interface: 10/100Mbps x 1 Function and Feature • Use home phone as a handset to unlock the door • Control home facilities through telephone • Remote set up security alarm and send alarm signal
  30. 30. LT Product Introduction Industrial Switch Technical Data • Power Dissipation: 9~72VDC • RJ45 port (10/100 Base T) x 8/15, Ethernet port x 1 • RJ11 port (10/100 Base T) x 8/16 • Ethernet port: SC single optical fibre port, communication distance: 0~20000m @ 0.5DB/km • Support port situation monitor • Support VLAN function • Ethernet Interface: 10/100Mbps x 1 Function and Feature The Industrial Switch gives a higher degree of reliability and flexibility to allow variation in solution design to suit any style of installation.
  31. 31. LT Product Introduction IoNix Home Facility Controller Technical Data • Power supply (to MOX603-4001): External 24Vdc supply • Operating temperature:-20-70’C • Serial communications: 2x serial RS232/485, software configurable, up to 115,200bps • Ethernet communications: 1x10/100 Ethernet, RJ45 connection • I/O support: IRIS LT rack I/O (up to 10 modules), modbus serial to Ethernet I/O Function and Feature • Powerful 32-bit 486 Processor • 32MB CPU RAM • Up to 32MByte disk on chip for program and data storage • Hot speed 10/100 Ethernet port • Two user-configurable RS232/RS485 serial ports • Modular design cascades directly with MOX603 I/O • Expand with remote I/O • Integrated and transportable IEC1131 software
  32. 32. LT Product Introduction 8 Channel DI Technical Data • Power Dissipation: 24VDC • Input Specifications: Number of channels: 8 OFF voltage: <5VDC ON voltage>10VDC Typical wetting current (@24VDC) :12mA Maximum voltage input: 30VDC Minimum pulse width detected: 6ms Maximum switching frequency (no-filtering): 80Hz • Isolation Specifications Channel to system: 5000Vrms Channel to channel: 1500Vrms Serial ports to system: 500Vrms Ethernet port to system: 1500Vrms • Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing Filter time (ms): User Definable •Response Time< 6ms • Power Supplies<2.7W
  33. 33. LT Product Introduction 8 Channel DO Technical Data • Power Dissipation: +24VDC • Output Specifications: Number of channels: 8 Maxi output AC voltage range: 250VDC Max output DC voltage range: 30VDC Output current rating: 1A per point Surge current per point: 10A for 10ms every 2s • Isolation Specifications Channel to system: 2000Vrms Channel to channel: 1500Vrms Serial ports to system: 500Vrms Ethernet port to system: 1500Vrms • Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing Filter time (ms): User Definable •Response Time< 10ms • Power Supplies<4.2W
  34. 34. LT Product Introduction 8 Channel AI Technical Data • Power Dissipation: +24VDC • Input Specifications: Number of channels: 8 Nominal signal range (span): 4-20mA Line fault detection: <0.5mA Resolution of ADC chip: 16bits Input resistance @20mA: < 300Ω Accuracy (@): ±20μA Temperature stability (to+): ± 0.006% of span per °C • Isolation Specifications Channel to system: 1000Vrms Channel to channel: 1000Vrms Serial ports to system: 500Vrms Ethernet to system (MX603-0308-616): 1500Vrms •Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing Filter time (ms): User Definable •Response Time< 500ms • Power Supplies<2.5W
  35. 35. LT Product Introduction 8 Channel AO Technical Data • Power Dissipation: +24VDC • Output Specifications: Number of channels: 8 Nominal signal range (span): 4-20mA Load capability (@20mA): < 0~750Ω Resolution of DAC chip: 12bits Output resistance @20mA: < 300Ω Accuracy (@): ±20μA Temperature stability (to+): ± 0.006% of span per °C • Isolation Specifications Channel to system: 2000Vrms Channel to channel: 1500Vrms Serial ports to system: 500Vrms Ethernet to system: 1500Vrms • Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing Filter time (ms): User Definable •Response Time< 100ms • Power Supplies<2.5W
  36. 36. LT Product Introduction 16 Channel DI Technical Data • Voltage Requirement: +5VDC • Input Specifications: Number of channels: 16 Minimum pulse width detected: 6MS Maximum switching frequency (no-filtering): 80Hz • Isolation Specifications Group* to group isolation: 1000Vrms Channel to system: 2500Vrms •Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing • Power Supplies: 5VDC for the system: < 1.0W 24VDC for the input channels: < 3.0W Allowable 24VDC tolerance: ±10%
  37. 37. LT Product Introduction 12 Channel DO Technical Data • Power Dissipation: +5VDC • Output Specifications: Number of channels: 12 Maxi output AC voltage range: 250VDC Max output DC voltage range: 30VDC Output current rating: 1A per point Surge current per point: 10A for 10ms every 2s • Isolation Specifications Channel to system: 2000Vrms Channel to channel: 1000Vrms •Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing •Power Supplies<3.0W
  38. 38. LT Product Introduction 12 Channel AI Technical Data • Power Dissipation: +5VDC • Input Specifications: Number of channels: 12 Nominal signal range (span): 4-20mA Line fault detection: <0.5mA Resolution of ADC chip: 24bits Input resistance @20mA: < 250Ω Accuracy (@): ±20μA Temperature stability (to+): ± 0.006% of span per °C • Isolation Specifications Channel to system: 1000Vrms Permissible potential difference between channels < 400VDC • Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing •Power Supplies<1.6W
  39. 39. LT Product Introduction 8 Channel AO Technical Data • Power Dissipation: +5VDC • Output Specifications: Number of channels: 8 Nominal signal range (span): 4-20mA Load capability (@20mA): < 0~750Ω Resolution of DAC chip: 12bits Accuracy (@): ±20μA Temperature stability (to+): ± 0.006% of span per °C • Isolation Specifications Channel to system: 1000Vrms Channel to channel: 1000Vrms • Environmental Conditions Operating temperature: -20 to 70°C Storage temperature: -40 to 85°C Relative humidity: 5 to 95%, non-condensing • Power Supplies: 5VDC for the system<1.0W 24VDC for the output channels<<10.0W Allowable 24VDC tolerance: ±10%
  40. 40. LT Product Introduction Vision Editor Vision Editor is an advanced home automation and remote access software package that is designed to integrate the major systems of any home. With Vision Editor, you can control and monitor lighting, appliances, security, curtain and other home facilities all from one central point. •Project: The Vision Project Manager can display the project contents and structure •Feature: display and edit the feature of selected items in the Vision Project Manager •Editor: display and edit the equipment page •Tool Box: popular graphs and control modes
  41. 41. Project References Project 88 Lake Golf Residential Complex Jade Residential Complex
  42. 42. Project 88 Ability for any display to control any door lock TCP/IP Ethernet operation Interface to the IoNix controller Door bell operation to active room Integration with Graphical Interface Location identification Video access via web interface  Project 88 is the most technologically advanced charity initiative bringing together Australia’s leading corporation to show their support for the George Gregan & Adam Scott Foundation.  MOX’s highly reliable and flexible IRIS Lifestyle product range is respond by delivering high-tech systems for the luxury property, including visitor monitoring, access control, home automation and utility management.
  43. 43. Lake Golf Residential Complex Ability for any display to control any door lock CAN BUS communications Interface to the IoNix controller Door bell operation to active room Integration with Graphical Interface Location identification Video access via web interface  The Lake Golf Residential Complex is an exclusive residential development comprising 161 luxury villas set around the Five Mountains National Park’s championship golf course, and offers a choice of townhouses and villas.  MOX applied its MOX LT home automation product range and home automation management solutions to the Lake Golf Residential Complex.
  44. 44. Jade Residential Complex Ability for any display to control any door lock TCP/IP communications Interface to the IoNix controller Door bell operation to active room Integration with Graphical Interface Location identification Video access via web interface  The Jade residential complex occupies a total site area 93 hectares with an aggregate of 15 million square meters of residential space.  In 2008, its property developer, GreenTown Group, adopted the MOX IRIS home automation solution to provide a secure, convenient and luxurious lifestyle to the 8,876 homes in the Jade residential complex.
  45. 45. System Structure RS-485 & CAN-BUS Comparison Technology RS-485 CAN-BUS Cost Low High Web Feature Single Master Web Multi Master Web Faulty Tolerance No Faulty Process & Faulty Detection Bus Usage Low High Faulty Affect Yes No Communication Distance <1.5Km <10Km Communication Speed Slow Fast
  46. 46. System Structure Technology Comparison Technology X-10 Power Carrier Wireless RF CAN-BUS User Population Big Small Big Need Re-wiring No No Yes Tech Mature 25 Years Last 5-6 Years Last 5-6 Years Standard Protocol Yes No Yes Wiring Mode Simple Simple Control Wiring Configuration Relative Easy Relative Easy System Combination Relative Good Wireless Signal Interfere Good Modular System Relative Good Very Good Very Good System Upgrade Relative Easy Relative Easy Easy Anti-Interfere Weak, Unstable Weak, Unhealthy Strong, Reliable Functions Many Few Many
  47. 47. System Structure System Comparison Item Traditional Building Intelligence System MOX Home Automation System Functions Security alarm, video phone, facility control, high speed communications through isolated sub-systems. Achieve all functions through a single integrated system Wiring Mode Complex and repeated wiring, each sub-system has isolated wiring system Simple and cheap, wiring through broadband System Reliability Hard to integrate different sub-systems, poor reliability Integrated system, consistent communication signals, high reliability User Interface Complex user interface, inconvenient Simple and friendly user interface, very easy to use, graphic touch screen interface, very convenient System Combination Non TCP/IP structure, isolated sub-systems Based on TCP/IP protocol, multi standard communication ports, very good system combination System Upgrade Isolated sub-systems, different platform , hard to expand Modular software and hardware, very easy to upgrade and expand
  48. 48. LT Product Introduction MOX Home Automation Products MOX Home Automation Products CAN BUS Opal ComPlate I/O Module Gateway Module Communication Panel Switch Controller Dimmer Controller Curtain Controller Infrared Controller Standalone I/O Rack Base/O Configuration Ethernet / CAN Gateway Telephone Gateway Switch Graphic Interface Graphic User Interface GUI with Controller 8 ports,16 ports, 24 ports Vision Editor Ethernet Software

×