Ceramics
Upcoming SlideShare
Loading in...5
×
 

Like this? Share it with your network

Share

Ceramics

on

  • 2,665 views

 

Statistics

Views

Total Views
2,665
Views on SlideShare
2,665
Embed Views
0

Actions

Likes
1
Downloads
85
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Ceramics Document Transcript

  • 1. Ceramics & Composites
  • 2. Ceramics & Composites Orderline 01484 466700VITA® VMK 95 VITA VM® 13Metal ceramic 3D and classic Metal ceramicVITA VMK 95 is suitable for veneering high gold content, reduced precious metal VITA VM 13 was developed as a special, fine-structure veneering ceramic for allcontent, silver-free, silver-containing and non-precious ceramic bonding alloys. commercially available alloys in the CTE range of 13.8 - 15.2. Like all VITA VM porcelains, VITAVM13 is distinguished by its light reflection and The warm shades of the VITA SYSTEM 3D-MASTER TOOTH GUIDE resp. VITAPAN refraction properties which are very similar to those of natural tooth enamel.classical shade guide can be perfectly reproduced with the compact and clearly The use of additional fluorescent and opalescent porcelains enables highly individualarranged assortment of the VMK 95 materials. Fine results can already be achieved and aesthetic restorations to be achieved.with two layers (dentine and enamel) in the standard layering technique. Efficientlyusable additional materials (e.g. one opaque dentine material for each shade and VITA VM 13 offers the following additional advantages:translucent materials for specific use) are suitable to achieve individual design. s Optimum processing properties such as good stability and modelling characteristicsVita® VMK 95 Paste Opaque Vita® VMK 95 NeckAvailable in 3D and Classic shade Available in the following shades. s Easy to grind and polish with excellent resultssystems. NA - NB - NC and ND s Homogeneous, dense surfaces5g £20.91 12g £6.96 s High degree of plaque resistanceVita® VMK 95 Opaque Vita® VMK 95 Cervical s Exceedingly antagonist friendlyAvailable in 3D and Classic shade 12g £8.71systems. s Outstanding aesthetic results12g £6.96 ® Vita VMK 95 Window s Compact assortment of additional porcelains available for50g £21.31 12g £6.96 individualization 50g £21.31Vita® VMK 95 Opaque Dentine s Compatible with VITA Akzent und VITA Interno porcelainsAvailable in 3D and Classic shade Vita® VMK 95 Correctivesystems. Available in the following shades. EXCLUSIVE - AVAILABLE ONLY IN THE IN VITA SYSTEM 3D-MASTER SHADES!12g £6.96 COR 1 and COR 250g £21.31 12g £8.71Vita® VMK 95 Dentine Vita® VMK 95 Wash Paste Opaque Vita® VM 13 Opaque Vita® VM 13 NeutralAvailable in 3D and Classic shade 7g £30.74 Base material to cover the substructure. Universal translucent materialsystems. Available in the following shades. Shade NT12g £6.96 Vita® VMK 95 Wash Opaque OP1 - OP2 - OP3 - OP4 - OP5 and WO 12g £8.6550g £21.31 12g £6.96 12g £8.65 50g £29.44 50g £21.31 250g £136.52Vita® VMK 95 Enamel Vita® VM 13 Base DentineAvailable in 3D and Classic shade Vita® VMK 95 Margin Colour defining Base Dentine materials Vita® VM 13 Windowsystems. Available in the following margins. with excellent coverage. Transparent material12g £6.96 A1 (MAR2)- A2 (MAR3) - A3 (MAR3) Available in the following shades. Shade WIN50g £21.31 A3.5 (MAR4) - A4 (MAR5) - B1 (MAR1) OM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 12g £8.65 B2 (MAR2) - B3 (MAR3) - B4 (MAR4) 2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 - 50g £29.44Vita® VMK 95 Paste Opaque C1 (25%MAR6 + 75% MARN) 2R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - 250g £136.525g £20.91 C2 (50%MAR6 + 50% MARN) 3M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - C3 (MAR6) - C4 (MAR6) - D2 (MAR4) 4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 Vita® VM 13 Colour OpaqueVita® VMK 95 C/Opaque D3 (MAR4) and 5M3 Shade intensive opaque materials forAvailable in the following shades. D4 (50%MAR6 + 50% MARN) 12g £8.65 characterisation, especially in case ofCO3 - CO6 and CO7 12g £8.71 thin walls12g £6.96 Vita® VM 13 Dentine Available in the following shades. Translucent Dentine material. CO1 (Orange) - CO2 (Brown) andVita® VMK 95 Translucent Available in the following shades. CO3 (Purple)Available in the following shades. OM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 5g £21.74T1 - T2 - T4 and T5 2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 -12g £6.96 2R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - Vita® VM 13 Effect Liner50g £21.31 3M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - For minor corrections at the marginal 4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 area. To control the fluorescence in theVita® VMK 95 Dentine Modifier and 5M3 restoration. To support and intensify theAvailable in the following shades. 12g £8.65 basic shade. Applied in the gingivalDM2 - DM3 - DM4 - DM6 and DM7 50g £29.44 area, they support distribution of light.12g £8.71 Available in the following shades. Vita® VM 13 Enamel EL1 (white shade for O group)Vita® VMK 95 Gingiva Available in the following shades. EL2 (Beige) - EL3 (Brown)Available in the following shades. ENL (light) and END (dark) EL4 (Yellow) - EL5 (Orange)G1 and G2 12g £8.65 EL6 (Green/Yellow)12g £8.71 50g £29.44 12g £29.87 250g £136.5294
  • 3. Technical Support 01484 466701 Ceramics & CompositesVita® VM 13 Corrective Vita® VM 13 Effect OpalWith reduced firing temperature To obtain the opal effect in the VITA® Omega 900(800oC) for corrections after glaze restorations young and highly Metal ceramic 3D and classicfiring. Corresponds to a transparant translucent teeth.enamel material in three nuances. Available in the following shades.Available in the following shades. EO1 neutral, universally suitable (Opal) Metal ceramic with a firing temperature of 900°C.COR1 (Neutral) - COR2 (Beige) EO2 with distinctive opal effect, for VITA OMEGA 900 is a metal ceramic which is particularly suitable for high goldCOR3 (Brown) whitish wedges and triangular content yellow ceramic bonding alloys. The reduced firing temperature ensures12g £11.92 protuberances in the occlusal area distortion-free firing of these alloys. Reduced precious metal content, silver-free and (Opal Whitish) silver-containing as well as non-precious ceramic bonding alloys can also beVita® VM 13 Chroma Plus EO3 Bluish (Opal Bluish) veneered with VITA OMEGA 900.Colour Intensive materials which are 12g £11.92preferably used in combination with The perfectly matched opaque, opaque dentine and dentine materials allow to obtainBase Dentine. In case of thin wall, they Vita® VM 13 Effect Enamel highly natural VITA SYSTEM 3-D-MASTER shades resp. VITAPAN classical shadessupport the shade in an efficient Can be used for all enamel areas of the already in the standard layering technique. Anomalies occurring in nature can bemanner. natural tooth. Universally suitable, reproduced with the materials of the PROFESSIONAL KIT.Available in the following shades. translucent enamel effect porcelains.CP1 (Ivory) - CP2 (Beige/Yellow) To achieve a natural effect of depth In addition to excellent esthetics, VITA OMEGA 900 offers the ceramist the advantageCP3 (Light Orange/Brown) Available in the following shades. of remarkable physical properties. VITA OMEGA 900 excels by its very low chemicalCP4 (Orange/Brown) EE1 for whitish incisal areas, marginal solubility, perfect thermal stability and excellent bending strength.CP5 (Green/Brown) ridges and triangular tubers (Mint12g £11.92 Cream) VITA OMEGA 900 Metal Ceramics are also available as bleached shade reproduction EE2 for ridges and wedges at the labial porcelains in shades 0M1, 0M2 and 0M3.Vita® VM 13 Margin surface (Pastel)Margin materials were developed to EE3 for pink-translucent discoloration in Vita® Omega 900 Paste Opaque Vita® Omega 900 Colour Pasteachieve perfect esthetic transition the cervical and/or enamel area (Misty Available in 3D and Classic shade Opaquebetween crown and die (stump) in case Rose) systems. Available in the following shades.of labially shortened metal coping in EE4 for ridges and wedges (Vanilla) 5g £23.89 CO1, CO2, CO3, CO4, CO5, CO6, CO7the area of the crown margin. EE5 yellowish-translucent to intensify and CO8Available in the following shades. the effect of depth in the approximal Vita® Omega 900 Opaque 12g £9.49M1 (White) - M4 (Yellow) area (Sun Light) Available in 3D and Classic shadeM5 (Bernstein) - M7 (Light Beige) EE6 for reddish-translucent systems. Vita® Omega 900 Wash PasteM8 (Pastel Brown) discoloration especially in older teeth 12g £9.49 OpaqueM9 (Light Orange) (Navajo) 50g £28.39 Available in the following shade. WO12g £11.92 EE7 orange-translucent to intensify the 7g £33.93 effect of depth (Golden Glow) Vita® Omega 900 Opaque DentineVita® VM 13 Effect Chroma EE8 red-translucent for cervicals areas Available in 3D and Classic shade Vita® Omega 900 CervicalColor-intensive modifier porcelains. and/or considerable discoloration systems. Available in the following shades.Taccentuate certain color areas of the (Coral) 12g £9.49 CE1, CE2 and CE3tooth. To increase the lightness value in EE9 for subcoating in the enamel area 50g £28.39 12g £9.49the neck, dentine and enamel areas. for bluish incisal areas (water drop)Available in the following shades. EE10 for bluish ridges and wedges Vita® Omega 900 Dentine Vita® Omega 900 CorrectiveEC1 (For White Effects) (Silver Lake Blue) Available in 3D and Classic shade Available in the following shades.EC2 (Sand-Beige) - EC3 (Light-Yellow) EE11 for greyish wedges to increase systems. COR1, COR2 and COR3EC4 (Tender Lemon Yellow) the effect of depth (Drizzle) 12g £9.49 12g £9.49EC5 (Light-Orange) - EC6 (Orange) 12g £11.92 50g £28.39EC7 (Pink) - EC8 (Beige-Brown) Vita® Omega 900 WindowEC9 (Brown) - EC10 (Green-Brown) Vita® VM 13 Gingiva ® Vita Omega 900 Enamel Available in the following shade. WINEC11 (Green-Grey) To restore the original gingival situation. Available in 3D and Classic shade 12g £9.4912g £11.92 Are applied and fired during the first systems. 50g £33.93 and/or second dentine firing. Colour 12g £9.49Vita® VM 13 Mamelon nuances range from orange-red and 50g £28.39 Vita® Omega 900 GingivaHighly fluorescent porcelain which is reddish to brown-red Available in the following shades.mainly used in the incisal area. For Available in the following shades. Vita® Omega 900 Lumanary G1 and G2shade characterization between dentine G1 (Rose) - G2 (Nectarine) Available in the following Shades: LM1, 12g £10.93and enamel. G3 (Pink Grapefruit) - G4 (Rosewood) LM2, LM3, LM4, LM5, LM6, LM7, LM8Available in the following shades. G5 (Cherry Brown) and LM9 Vita® Omega 900 Opal TranslucentMM1 (Beige) GOL (Light Flesh) - GOD (Dark Flesh) 12g £32.78 Available in the following shades.MM2 (Warm Yellow-Brown) 12g £11.92 OT1, OT2 and OT3MM3 (Tender orange) Vita® Omega 900 Nuance 12g £11.6012g £11.92 Shades: NU1, NU2, NU3, NU4, NU5, NU6, NU7, NU8, NU9, NU10 Vita® Omega 900 MarginVita® VM 13 Effect Pearl 9g £11.60 Available in the following shades.Only suitable for effects on the surface, MARn, MAR1, MAR2, MAR3, MAR4,not for layering in. Perfectly suitable for Vita® Omega 900 Translucent MAR5 and MAR6”bleached” restorations. To obtain Available in the following shades. 12g £11.60nuances of yellow and red. T1, T2, T3, T4, T5, T6, T8 and T9Available in the following shades. 12g £9.49EP1 (Pastel-Yellow) 50g £28.39EP2 (Pastel-Orange)EP3 (Pastel-Rosé)12g £11.92 95
  • 4. Ceramics & Composites Orderline 01484 466700VITA® VM 7Veneering materialVITA VM 7 was developed as a special Veneering Ceramic with a fine structure for all- Vita® VM 7 Window Vita® VM 7 Effect Pearlceramic framework materials in the CTE range of 7.2 - 7.9 (such as VITA In-Ceram Transparent material Only suitable for effects on the surface,Classic ALUMINA, SPINELL, ZIRCONIA as well as aluminium oxide blocs for high Shade WIN not for layering in. Perfectly suitable fortemperature sintering like VITA In-Ceram 2000 AL CUBES for inLab). 12g £9.40 ”bleached” restorations. To obtain 50g £27.94 nuances of yellow and red.Like all VITA VM materials, VITA VM 7 is distinguished by its light refraction and Available in the following shades.reflection properties resembling those of natural tooth enamel. The use of additional Vita® VM 13 Effect Liner EP1 (Pastel-Yellow)fluorescent and opalescent porcelains permits outstandingly individual, high quality For minor corrections at the marginal EP2 (Pastel-Orange)results. area. To control the fluorescence in the EP3 (Pastel-Rosé) restoration. To support and intensify the 12g £11.28In a study by Giordano at the Goldman School of Dental Medicine at the University of basic shade. Applied in the gingivalBoston, the abrasion behavior of various ceramic materials compared to natural tooth area, they support distribution of light. Vita® VM 7 Effect Opalenamel was researched. The best results were obtained with VITA VM 7, since their Available in the following shades. To obtain the opal effect in thefine structure resulted in virtually ideal, enamel-like behavior. VITA VM 7 therefore can EL1 (white shade for O group) restorations young and highlybe classed as antagonist friendly materials. EL2 (Beige) - EL3 (Brown) translucent teeth. EL4 (Yellow) - EL5 (Orange) Available in the following shades.In addition to this, VITA VM 7 offers the following advantages: EL6 (Green/Yellow) EO1 neutral, universally suitable (Opal) 12g £35.64 EO2 with distinctive opal effect, fors Optimum working properties such as stability characteristics whitish wedges and triangular and modeling characteristics Vita® VM 7 Corrective protuberances in the occlusal areas Excellent grinding and polishing properties, particularly in situ With reduced firing temperature (800oC) (Opal Whitish) for corrections after glaze firing. EO3 Bluish (Opal Bluish)s Homogeneous and dense surfaces Corresponds to a transparant enamel 12g £11.28s High degree of plaque resistance material in three nuances. Available in the following shades. Vita® VM 7 Effect Enamels Antagonist friendly to a high degree COR1 (Neutral) - COR2 (Beige) Can be used for all enamel areas of thes Excellent aesthetic results COR3 (Brown) natural tooth. Universally suitable, 12g £11.28 translucent enamel effect porcelains.s Compact selection of additional porcelains for individualization To achieve a natural effect of depth Vita® VM 7 Chroma Plus Available in the following shades.Available EXCLUSIVELY IN VITA SYSTEM 3D-MASTER Shades. Colour Intensive materials which are EE1 for whitish incisal areas, marginal preferably used in combination with ridges and triangular tubers (Mint Vita® VM 7 Base Dentine Base Dentine. In case of thin wall, they Cream) Colour defining Base Dentine materials support the shade in an efficient EE2 for ridges and wedges at the labial with excellent coverage. manner. surface (Pastel) Available in the following shades. Available in the following shades. EE3 for pink-translucent discoloration in OM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 CP2 (Beige/Yellow) the cervical and/or enamel area (Misty 2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 - CP3 (Light Orange/Brown) Rose) 2R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - CP4 (Orange/Brown) EE4 for ridges and wedges (Vanilla) 3M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - 12g £11.28 EE5 yellowish-translucent to intensify 4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 the effect of depth in the approximal and 5M3 Vita® VM 7 Effect Chroma area (Sun Light) 12g £9.40 Color-intensive modifier porcelains. EE6 for reddish-translucent 50g £27.94 Taccentuate certain color areas of the discoloration especially in older teeth tooth. To increase the lightness value in (Navajo) Vita® VM 7 Dentine the neck, dentine and enamel areas. EE7 orange-translucent to intensify the Translucent Dentine material. Available in the following shades. effect of depth (Golden Glow) Available in the following shades. EC1 (For White Effects) EE8 red-translucent for cervicals areas OM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 EC2 (Sand-Beige) - EC3 (Light-Yellow) and/or considerable discoloration 2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 - EC4 (Tender Lemon Yellow) (Coral) 2R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - EC5 (Light-Orange) - EC6 (Orange) EE9 for subcoating in the enamel area 3M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - EC7 (Pink) - EC8 (Beige-Brown) for bluish incisal areas (water drop) 4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 EC9 (Brown) - EC10 (Green-Brown) EE10 for bluish ridges and wedges and 5M3 EC11 (Green-Grey) (Silver Lake Blue) 12g £9.40 12g £11.28 EE11 for greyish wedges to increase 50g £27.9 the effect of depth (Drizzle) Vita® VM 7 Mamelon 12g £11.28 Vita® VM 7 Enamel Highly fluorescent porcelain which is Available in the following shades. mainly used in the incisal area. For Vita® VM 7 Gingiva ENL (light) and END (dark) shade characterization between dentine To restore the original gingival situation. 12g £9.40 and enamel. Are applied and fired during the first 50g £27.9 Available in the following shades. and/or second dentine firing. Colour MM1 (Beige) nuances range from orange-red and Vita® VM 7 Neutral MM2 (Warm Yellow-Brown) reddish to brown-red Universal translucent material MM3 (Tender orange) Available in the following shades. Shade NT 12g £11.28 G1 (Rose) - G2 (Nectarine) 12g £9.40 G3 (Pink Grapefruit) - G4 (Rosewood) 50g £27.9 G5 (Cherry Brown) 12g £11.2898
  • 5. Technical Support 01484 466701 Ceramics & CompositesVITA® VM 9Veneering MaterialVITA VM 9 for veneering all-ceramic substructure materials in the CTE range of Vita® VM 9 Chroma Plus Vita® VM 9 Effect Enamelapprox. 10.5, (e.g. VITA In-Ceram 2000 YZ CUBES). Colour Intensive materials which are Can be used for all enamel areas of the preferably used in combination with natural tooth. Universally suitable,The new material is perfectly suitable for individualizing VITABLOCS for CEREC, Base Dentine. In case of thin wall, they translucent enamel effect porcelains.VITABLOCS Mark II for CEREC and VITABLOCS TriLuxe for CEREC. support the shade in an efficient To achieve a natural effect of depth manner. Available in the following shades.The VITA VM 9 fine-particle ceramic excels by its refraction and reflection similar to Available in the following shades. EE1 for whitish incisal areas, marginalnatural enamel. Ad additional benefit is the perfect protection of antagonist teeth. CP2 (Beige/Yellow) ridges and triangular tubers (Mint CP3 (Light Orange/Brown) Cream)Additionaly, brilliant additional materials are available which provide fluorescent and CP4 (Orange/Brown) EE2 for ridges and wedges at the labialopalsescent effects to meet highly demanding aesthetic requirements. 12g £12.26 surface (Pastel) EE3 for pink-translucent discoloration inIn addition to this, VITA VM 9 offers the following advantages: Vita® VM 9 Effect Chroma the cervical and/or enamel area (Misty Color-intensive modifier porcelains. Rose)s Optimum working properties such as stability characteristics Taccentuate certain color areas of the EE4 for ridges and wedges (Vanilla) and modeling characteristics tooth. To increase the lightness value in EE5 yellowish-translucent to intensifys Excellent grinding and polishing properties, particularly in situ the neck, dentine and enamel areas. the effect of depth in the approximal Available in the following shades. area (Sun Light)s Homogeneous and dense surfaces EC1 (For White Effects) EE6 for reddish-translucents High degree of plaque resistance EC2 (Sand-Beige) - EC3 (Light-Yellow) discoloration especially in older teeth EC4 (Tender Lemon Yellow) (Navajo)s Antagonist friendly to a high degree EC5 (Light-Orange) - EC6 (Orange) EE7 orange-translucent to intensify thes Excellent aesthetic results EC7 (Pink) - EC8 (Beige-Brown) effect of depth (Golden Glow) EC9 (Brown) - EC10 (Green-Brown) EE8 red-translucent for cervicals areass Compact selection of additional porcelains for individualization EC11 (Green-Grey) and/or considerable discoloration 12g £12.26 (Coral)Available EXCLUSIVELY IN VITA SYSTEM 3D-MASTER Shades. EE9 for subcoating in the enamel area Vita® VM 9 Mamelon for bluish incisal areas (water drop) Highly fluorescent porcelain which is EE10 for bluish ridges and wedges mainly used in the incisal area. For (Silver Lake Blue) shade characterization between dentine EE11 for greyish wedges to increaseVita® VM 9 Base Dentine Vita® VM 9 Window and enamel. the effect of depth (Drizzle)Colour defining Base Dentine materials Transparent material Available in the following shades. 12g £12.26with excellent coverage. Shade WIN MM1 (Beige)Available in the following shades. 12g £10.11 MM2 (Warm Yellow-Brown) Vita® VM 9 GingivaOM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 50g £30.18 MM3 (Tender orange) To restore the original gingival situation.2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 - 12g £12.26 Are applied and fired during the first2R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - Vita® VM 9 Effect Liner Vita® VM 9 Effect Pearl and/or second dentine firing. Colour3M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - For minor corrections at the marginal Only suitable for effects on the surface, nuances range from orange-red and4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 area. To control the fluorescence in the not for layering in. Perfectly suitable for reddish to brown-redand 5M3 restoration. To support and intensify the ”bleached” restorations. To obtain Available in the following shades.12g £10.11 basic shade. Applied in the gingival nuances of yellow and red. G1 (Rose) - G2 (Nectarine)50g £30.18 area, they support distribution of light. Available in the following shades. G3 (Pink Grapefruit) - G4 (Rosewood) Available in the following shades. EP1 (Pastel-Yellow) G5 (Cherry Brown)Vita® VM 9 Dentine EL1 (white shade for O group) EP2 (Pastel-Orange) 12g £12.26Translucent Dentine material. EL2 (Beige) - EL3 (Brown) EP3 (Pastel-Rosé)Available in the following shades. EL4 (Yellow) - EL5 (Orange) 12g £12.26 Vita® VM 9 Bonder PasteOM1 - OM2 - OM3 - 1M1 - 1M2 - 2L1.5 EL6 (Green/Yellow) Available in the following shades.2L2.5 - 2M1 - 2M2 - 2M3 - 2R1.5 - 12g £34.50 Vita® VM 9 Effect Opal EBO - EB1 - EB2 - EB3 - EB4 - EB52R2.5 - 3L1.5 - 3L2.5 - 3M1 - 3M2 - To obtain the opal effect in the 12g £25.723M3 - 3R1.5 - 3R2.5 - 4L2.5 - 4M1 - Vita® VM 9 Corrective restorations young and highly4M2 - 4M3 - 4R1.5 4R2.5 - 5M1 - 5M2 With reduced firing temperature (800oC) translucent teeth. Vita® VM 9 Effect Bonderand 5M3 for corrections after glaze firing. Available in the following shades. Available in the following shades.12g £10.11 Corresponds to a transparant enamel EO1 neutral, universally suitable (Opal) EBO - EB1 - EB2 - EB3 - EB4 - EB550g £30.18 material in three nuances. EO2 with distinctive opal effect, for 12g £25.72 Available in the following shades. whitish wedges and triangularVita® VM 9 Enamel COR1 (Neutral) - COR2 (Beige) protuberances in the occlusal areaAvailable in the following shades. COR3 (Brown) (Opal Whitish)ENL (light) and END (dark) 12g £12.26 EO3 Bluish (Opal Bluish)12g £10.11 12g £12.2650g £30.18Vita® VM 9 NeutralUniversal translucent materialShade NT12g £10.1150g £30.18 101
  • 6. Ceramics & Composites Orderline 01484 466700VITADUR® Alpha VITA® AkzentFor In-Ceram Surface StainsThe VITADUR ALPHA all ceramic materials are used to veneer slip-coated and ground VITA Akzent is an assortment of stains for creating natural effects at the surface of theVITA In-Ceram SPINELL, ALUMINA and ZIRCONIA substructures. Additionally, tooth. VITA Akzent stains are designed for surface characterization - for example inVITADUR ALPHA is used for individualizing VITA LUMIN VACUUM PREFORMS as well the gingival area - as well as for reproducing natural discoloration effects such asas for individual layering of machine-ground substructures. decalcification marks and cracks in the enamel. The VITADUR ALPHA all ceramic materials can be processed in a simple and reliable VITA Akzent Stains are suitable for use with all VITA Veneering Ceramics.way. The final result that is achieved with these materials exhibits utmost esthetic,excellent shade adaptation and natural brilliance. They have been perfectly matched The stains are also ideal for adding colour characterizations to VITABLOCS.with the COE of In-Ceram substructures. The ceramic materials are available in VITASYSTEM 3D-MASTER and VITAPAN classical shades. Furthermore, VITA Akzent stains can be used for creating shade effects on acrylic teeth and acrylic veneers made of VITA VM LCThe VITADUR ALPHA all ceramic materials are also available as Bleached shadereproduction porcelains in shades OM1, OM2 and OM3.VITADUR® ALPHA ARTIST LINE SET I & ARTIST LINE SET II Akzent StainsAdditional materials for esthetic perfectioning of the VITADUR ALPHA technique. Available in the following Shades Birch (white) AKZ01 - Mellow yellow AKZ02 - Sun kiss AKZ03 Inca gold AKZ04 - Gold earth AKZ05 - Curry AKZ06 - Adobe (dark orange) AKZ07Vitadur® Alpha Opaque Dentine Vitadur® Alpha Translucent Almond AKZ08 - Burnt clay AKZ09 - Muted Clay AKZ10 - Tabac AKZ11Available in the following shades. Available in the following shades. Redwood AKZ12 - Shak AKZ13 - Jet Black AKZ14 - Brown stone AKZ15A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 T1 (Milky), T2 (Opal), T3 (Pearl), Seal brown AKZ16 - Niagra AKZ17B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 T4 (Clear), T5 (Polar), T6 (Blue), Fumo 1* AKZ18 - Fumo 2* AKZ19 - Fumo 3* AKZ20 * Discolouration and smoking12g £9.73 T7 (Smoke), T8 (Shell), T9 (Navajo) and 3g £7.1850g £30.07 WIN (Transparent) 12g £9.73 Glaze powderVitadur® Alpha Dentine 50g £30.07 7.5gm £12.65Available in the following shades. 36gm £61.61A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 Vitadur® Alpha Corrective WindowB4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 Available in the following shades. Finishing agent12g £9.73 COR and WIN 5gm £10.0450g £30.07 12g £9.73 Glaze liquidVitadur® Alpha Enamel Vitadur® Alpha Colour Core 20ml £5.12Available in the following shades. Available in the following shades.A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 CC1 - CC2 - CC3 - CC4 - CC5 - CC6B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 CC7 and CC812g £9.73 12g £9.7350g £30.07 Vitadur® Alpha CervicalVitadur® Alpha Dentine Modifier Available in the following shades. VITA® In-Ceram Classic AluminaAvailable in the following shades. CE1 - CE2 - CE3 and CE4 In the slip-casting techniqueDM1(Lemon Drop), DM2 (Golden 12g £9.73Glow), DM3 (Saffron), DM4 (Sunflower),DM5 (Golden Cream), DM6 ( Dusty Vitadur® Alpha Gingiva VITA In-Ceram Classic ALUMINA is a system for producing high-strength, oxide-Coral) and DM7(Salmon) Available in the following shades. ceramic substructures for single anterior and posterior crowns as well as three-unit12g £12.26 G1 - G2 - G3 - G4 - G5 and G6 anterior bridges. 12g £11.50Vitadur® Alpha Intensive The substructures are distinguished by a high degree of biocompatibility and haveAvailable in the following shades. Vitadur® Alpha Opal Translucent been clinically proven millions of times since 1989.IN1 (Linen), IN2 (Flesh), IN3 (Corn Silk), Available in the following shades.IN4 (Pastel Yellow), IN5 (Ochre), IN6 OT1 - OT2 and OT3 The substructures are veneered with the fine-particle Ceramic VITA VM 7.(Golden Earth), IN7 (Flame Orange), 12g £13.23IN8 (Rrush), IN9 (Cloud) and IN10 s Restorations can be non-adhesively cemented(Snow) Vitadur® Alpha Lumanaries12g £12.26 Available in the following shades. Vita® In-Ceram Classic Alumina Vita® In-Ceram Interspace Varnish LM1 - LM2 - LM3 - LM4 - LM5 and LM6 Glass Powder 30ml £18.28 ®Vitadur Alpha Margin 12g £35.71 AL1 - AL2 - AL3 - AL4Available in the following shades. 25g £108.41 Vita® In-Ceram Interspace VarnishMA1, MA2, MA3, MA4, MA5, MA6, Vitadur® Alpha Opacious Dentine ThinnerMARN (Translucent) Available in the following shades. Vita® In-Ceram Classic Alumina 30ml £15.1412g £12.26 OM1 - OM2 and OM3 PowderMargin Kit £77.53 12g £9.73 200g £197.11 Vita® In-Ceram Testing Liquid 6ml £8.02 Vita® In-Ceram Special plaster for crown and bridges Vita® In-Ceram Alumina Additive 20 x 20g £70.63 5ml £10.92 Vita® In-Ceram Classic Alumina/Zirconia Mixing Liquid 20 x 5ml £53.92104
  • 7. Technical Support 01484 466701 Ceramics & CompositesVITA® In-Ceram Classic Spinell VITA® In-Ceram Classic SprintIn the slip-casting technique Crown SubstructuresVITA In-Ceram Classic SPINELL is a system for the production of high-strength, oxide- VITA In-Ceram Classic sprint provides for rapid production of VITA In-Ceram ALUMINAceramic, translucent substructures for anterior crowns as well as Inlay- and Onlay and ZIRCONIA crown copings. The furnace firing time has been reduced dramaticallysubstructures. compared with the conventional firing method.The substructures are distinguished by a high degree of biocompatibility and satisfy From now on it is also possible to produce VITA In-Ceram ZIRCONIA anterior andthe highest aesthetic demands due to their high degree of translucency. This makes posterior crown copings using the efficient sprint method without any compromisesVITA In-Ceram Classic SPINELL particularly suitable for anterior restorations. with regard to the stability.The substructures are veneered with the fine-particle Ceramic VITA VM 7. The substructures are manufactured with the fine-particle Ceramic VITA VM 7.Advantages s Excellent aesthetics and biocompatibilitys Highest light conductivity of all oxide-ceramic systems s Cementation with conventional or adhesive cementss Restorations can be non-adhesively cemented The following additional materials are required for the production of Vita® In-Ceram®Vita® In-Ceram Classic Slip Vita® In-Ceram Classic Plaster for crowns using the sprint method:Glass Powder crown and bridgesS11 - S12 - S13 - S14 20 sachets of Vita® In-Ceram Sprint update kit25g £105.25 20g £54.33 Vita® In-Ceram Sprint Special Plaster 20 bags of 20g, Vita® In-Ceram Insulation Gel 5g £81.16Vita® In-Ceram Classic Slip Vita® In-Ceram Classic SlipPowder Powder Liquid Vita® In-Ceram Sprint for crowns assortment200g £197.11 16 ampoules of For the preparation of Vita® In-Ceram Alumina crowns in modular box, complete. 2.85 ml £41.19 £431.48Vita® In-Ceram Classic Die Materialfor inlays/onlays Vita® In-Ceram Classic Insulation20 sachets of Gel15g £54.33 5g £9.93VITA® In-Ceram Classic ZirconiaIn the slip-casting techniqueAn Aluminium oxide strengthened with Zircon oxide. VITA In-Ceram ClassicZIRCONIA is a system for manufacturing high-strength, oxide-ceramic single crowncopings and three-unit posterior bridge substructures.The substractures are manufactured with the fine-particle Ceramic VITA VM 7.s High marginal accuracys Biocompatibilitys High tear tenacitys Restorations ca be non-adhesively cementedVita® In-Ceram Classic Zirconia Vita® In-Ceram ClassicGlass Powder Alumina/Zirconia Mixing LiquidZ21N - Z22N - Z23N - Z24N 20 Ampoules of25g £105.25 5ml £53.92Vita® In-Ceram Classic Zirconia Vita® In-Ceram Zirconia AdditivePowder 5ml £13.23300g £200.46 105
  • 8. Ceramics & Composites Orderline 01484 466700VITA® VM LCLight-curing microparticle compositeLight-curing microparticle composite to be used for fixed and removable restorations Vita® VM LC Opaque Vita® VM 13 Gingiva Base material to cover the sub To restore the original gingival situation.Just like all VITA VM materials VITA VM LC excels by its refraction and reflection structure. Are applied and fired during the firstbehavior, which is similar to enamel. The fine-particle inorganic filler material with a Available in the following shades. and/or second dentine firing. Colourprimary particle size of just a few nanometers exhibits particularly homogeneous 1M1 - 1M2 - 2L1.5 - 2L2.5 - 2M1 - 2M2 nuances range from orange-red anddistribution in VITA VM LC. Accordingly, natural scattering of light is achieved which 2M3 - 2R1.5 - 2R2.5 - 3L1.5 - 3L2.5 reddish to brown-redprovides the desired translucency. 3M1 - 3M2 - 3M3 - 3R1.5 - 3R2.5 Available in the following shades. 4L2.5 - 4M1 - 4M2 - 4M3 - 4R1.5 G1 (Rose) - G2 (Nectarine)Additionally, VITA VM LC offers the following benefits: 4R2.5 - 5M1 - 5M2 and 5M3 G4 (Rosewood) 10g £14.75 G5 (Cherry Brown)s Perfect processing properties such as mouldability GOL (Light Flesh)s Excellent grindability and polishability Vita® VM 13 Base Dentine 4g £20.81 Colour defining Base Dentine materialss Homogeneous surfaces with excellent coverage. Vita® VM LC Gingiva Opaques Considerable reduction of secondary discoloration and plaque Available in the following shades. To cover the sub structure before the 1M1 - 1M2 - 2L1.5 - 2L2.5 - 2M1 - 2M2 application of Gingiva porcelains. accumulation - 2M3 - 2R1.5 - 2R2.5 - 3L1.5 - 3L2.5 Available in the following shade.s Perfect harmonization of mechanical properties 3M1 - 3M2 - 3M3 - 3R1.5 - 3R2.5 GOL (Light Flesh)s Outstanding esthetic results 4L2.5 - 4M1 - 4M2 - 4M3 - 4R1.5 10g £14.75 4R2.5 - 5M1 - 5M2 and 5M3s Compact range of additional materials for individualizing 4g £20.81 Vita® VM LC Effect Liner For minor corrections at the marginalVITA VM LC is exclusively available in the VITA SYSTEM 3D-MASTER shades. Vita® VM LC Enamel area. To control the flurorescence in the Available in the following shades. restoration. To support and intensify theThe VITA VM BOND bonding system which is a component of VITA VM LC ENL (light) and END (dark) basic shade. Applied in the gingivalguarantees reliable bonding between metal and composite. 4g £20.81 area, they support distribution of light. Available in the following shades. EL2 (Beige) - EL3 (Brown) Vita® VM 13 Neutral EL4 (Yellow) - EL5 (Orange) Universal translucent material EL6 (Green/Yellow) Shade NT 4g £20.81 4g £20.81 Vita® VM LC Bond Vita® VM 13 Window The neutral-colored bonding system Transparent material VITA VM BOND allows reliable and Shade WIN permanent bonding between dental 2g £11.16 alloy and VITA VM LC. The elastic bonding layer acts like a buffer between Vita® VM LC Colour Opaque alloy and composite and absorbs any Shade intensive opaque materials for masticatory forces. characterisation, especially in case of Available in the following shade. thin walls BON Available in the following shades. 12g £71.20 CO1 (Orange) - CO2 (Brown) and Liquid CO3 (Purple) 5ml £39.19 10g £14.75 Vita® VM LC Paint Vita® VM LC Effect Enamel Available in the following shade. Can be used for all enamel areas of the PT1 - PT3 - PT5 - PT8 - PT9 - PT12 natural tooth. Universally suitable, PT13 - PT15 - PT17 and PT19 translucent enamel effect porcelains. 2g £13.24 To achieve a natural effect of depth Available in the following shades. EE3 for pink-translucent discoloration in the cervical and/or enamel area (Misty Rose) EE6 for reddish-translucent discoloration especially in older teeth (Navajo) EE9 for subcoating in the enamel area for bluish incisal areas (water drop) 4g £20.81106
  • 9. Technical Support 01484 466701 Ceramics & CompositesVITA® Zeta HC Composite VITA® Zeta LC CompositeVeneering composite Veneering compositeVITA ZETA HC COMPOSITE is a homogeneous, methyl methacrylate-free, heat curing VITA ZETA HC COMPOSITE is a light-curing C&B paste material which has aveneering composite. multiphase feldspar frit as a filling material. By means of the balanced grain size distribution of the multiphase feldspar frit, a high degree of abrasion resistance and anAdvantages: increased impact resistance is achieved without brittleness.s Methyl methacrylate-free Indications:s High abrasion resistance s Veneering crowns, bridges, telescopic crowns and acrylics High resistance to solvents substructuress Excellent elasticity and impact strength values, and therefore s Manufacture of metal-free crowns and 3-unit anterior bridges particularly to be recommended for veneers on secondary s Inlays/veneers crowns s Building up and individualizing VITA acrylic teeths Ready-to-use paste material VITA ZETA LC COMPOSITE is available in the VITAPAN® classical shades.VITA ZETA HC COMPOSITE is available in the VITA SYSTEM 3D-MASTER® andVITAPAN® classical shades. Vita® Zeta LC Composite Dentine Vita® Zeta LC Composite GINGIVA Available in the following shades. Available in the following shade.Indications: A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 G4s Veneering crowns, bridges and telescopic crowns B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 4g £19.14s Manufacture of metal-free crowns and full veneers in the 4g £19.14 Vita® Zeta LC INTENSIVE anterior area Vita® Zeta LC Composite Neck Available in the following shades.s Redesigning and modelling veneers made from VITA acrylic Available in the following shades. IN11 - IN12 - IN13 - IN14 - IN15 - IN16 teeth NE11 - NE12 - NE13 - NE14 IN17 - IN18 - IN19 - IN20 4g £19.14 3ml £18.82Vita® Zeta HC Composite Dentine Vita® Zeta HC Composite GINGIVAAvailable in the following shades. Vita® Zeta LC Composite Enamel Vita® Zeta LC Modelling Liquid Available in the following shade.A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 Available in the following shades. 30ml £32.50 G4B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 EN11 - EN12 - EN13 - EN14 4g £13.004g £13.00 4g £19.14 Vita® Zeta LC Insulating Liquid ® Vita Zeta HC INTENSIVE 30ml £10.75Vita® Zeta HC Composite Neck Vita® Zeta LC Composite Available in the following shades.Available in the following shades. Translucent IN11 - IN12 - IN13 - IN14 - IN15 - IN16NE11 - NE12 - NE13 - NE14 Available in the following shades. IN17 - IN18 - IN19 - IN204g £13.00 T11 - T12 - T13 - T14 3ml £13.00 4g £19.14Vita® Zeta HC Composite Enamel Vita® Zeta HC Modelling LiquidAvailable in the following shades.EN11 - EN12 - EN13 - EN14 30ml £17.78 VITA® Zeta HLC Bond4g £13.00 Vita® Zeta HC Insulating Liquid Veneering system 30ml £10.34Vita® Zeta HC Composite VITA ZETA HLC BOND serves as an opaque bonding system for the secure,Translucent hydrolysis-resistant bonding of VITA ZETA Veneering Acrylics with metal.Available in the following shades.T11 - T12 - T13 - T144g £13.00 s Acts as a bonding system and at the same time has opaque shading, thereby saving one working step s Optimum bond strength by means of a chemical/physical effect VITA ZETA HLC BOND is available in the VITA SYSTEM 3D-MASTER® and VITAPAN® classical shades.VITA® Zeta LC Composite Optimizer Vita® Zeta HLC Bond OpaqueVeneering composite Available in the following shades. A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4VITA ZETA LC OPTIMIZER simplifies the stratification of thin-walled veneers. 4g £26.79The special creamy consistency permits the application of thin layers and the smallest Vita® Zeta HLC Bond Colour Opaquecorrections, even in the case of already completed veneers. Available in the following shades. CO11 - CO12 - CO13 - CO14Vita® Zeta LC Composite Optimzer 4g £26.79Available in the following shades.A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 Vita® Zeta HLC Bond Opaque Liquid Vita® Zeta HLC Bond ConditionerB4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 5ml £39.20 10ml £6.873g £15.39 109
  • 10. Ceramics & Composites Orderline 01484 466700 Vita® VM Paste FluidVITA® Zeta CC Polymer To modify the consistency of the VITAVeneering composite VM 9 EFFECT BONDER PASTER as well as the VITA VM 13 opaque paste 15 ml £7.63VITA ZETA CC POLYMER is a filler-free, cold-curing/autopolymerizing acrylic for themanufacture of provisional restorations and extra-oral repairs. Vita® Paste Opaque Liquid For changing the consistency of the VMK 95, OMEGA 900 and RESPONSEs Excellent material properties paste opaque, color paste opaques Increased resistance to chemical and physical stresses in the materials and the TITANIUM CERAMIC oral cavity paste bonder. 15 ml £6.89s Excellent modelling characteristicss High lustre of surface after polishing; inhibits plaque Vita® Omega 900 Opaque Liquid For mixing the VITA OMEGA 900 opaque accumulation to a considerable degree porcelains. 50 ml £4.54VITA CC POLYMER is available in the VITA SYSTEM 3D-MASTER® and VITAPAN® 250 ml £17.45classical shades. Vita® Opaque LiquidIndications: For mixing the VITA OMEGA, VMK 95,s Manufacture of provisional crowns and bridges RESPONSE and TITANIUM CERAMIC opaque and color opaque porcelains.s Cementation of teeth and veneers made from VITA acrylic 50 ml £4.69 teeth, e.g. cast model work 250 ml £17.81s Covering attachments in the field of combined prostheses Vita® Modelling Fluid For mxing the VITA OMEGA 900, VMK9, TITANIUM CERAMIC and VITADURVita® Zeta CC Polymer Dentine Vita® Zeta CC Polymer Enamel ALPHA porcelains.Available in the following shades. Available in the following shades. 50 ml £4.69A1 - A2 - A3 - A3.5 - A4 - B1 - B2 - B3 EN11 - EN12 - EN13 - EN14 250 ml £17.81B4 - C1 - C2 - C3 - C4 - D2 - D3 - D4 10g £4.3919g £7.41 Vita® Response Modelling Liquid Vita® Zeta CC Polymer Transparent For mixing the VITA RESPONSEVita® Zeta CC Polymer Neck 10g £4.39 porcelains.Available in the following shades. 50 ml £5.62NE11 - NE12 - NE13 - NE14 Vita® Zeta CC Polymer Liquid 250 ml £21.9210g £4.39 30ml £14.48 100ml £42.42 Vita® Response Modelling Liquid High Silver Liquid for high silver content alloys with a silver content of more than 30°.VITA® Liquids 50 ml £4.99For all Vita Products Vita® Modelling Liquid Extra For mixing the VITA OMEGA, VITAVita® VM Modelling Liquid OMEGA 900, VITA TITANIUM CERAMIC,Modelling liquid for mixing VITA VM VITADUR ALPHA, VITA VMK 95 and VITABASE DENTINE, DENTINE, ENAMEL RESPONSE porcelains. The liquidand additional porcelains. reduces the effects of undesiredNot suitable for opaque porcelains. underfiring. A smoother and more50 ml £4.69 homogeneous surface is achieved.250 ml £19.02 50 ml £4.28 250 ml £18.74Vita® VM 9 Effect Bonder FluidFor mixing the VITA VM 9 EFFECT Vita® SeparatorBONDER porcelains. Separating liquid (ceramic against50 ml £4.69 ceramic) for the VITA ceramic systems 16 ml £9.51Vita® VM Opaque FluidFor mixing all VITA VM 13 powder Vita® Toluolopaque porcelains. It gives the powder a Cleaning solutioncreamy consistency, which allows 16 ml £3.81accurate application; prevents loss ofporcelain during application. Vita® Die Seperating Liquid50 ml £4.69 Separating liquid (ceramic against250 ml £18.34 plaster) for the VITA ceramic techniques (except of TITANIUM CERAMIC) 16 ml £9.51110