ROUTER 3Router>Router>enRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int s0/0/0...
Router(config-dial-peer)#session target ipv4:99.99.99.97Router(config-dial-peer)#exitRouter(config)#dial-peer voice 2 voip...
Router(config-dial-peer)#session target ipv4:200.1.1.1Router(config-dial-peer)#exitRouter(config)#dial-peer voice 2 voipRo...
ROUTER 1Router(config)#Router(config)#int s 0/0/0Router(config-if)#ip add 99.99.99.97 255.255.255.0Router(config-if)#no sh...
Router(config-router)#%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 99.99.99.99 (Serial0/0/0) is up: new adjacencyRouter(config-...
Upcoming SlideShare
Loading in...5
×

Configuracion de los router clase 04 agosto.ppt

934

Published on

configuración de los router para voz ip

Published in: Technology, Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total Views
934
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
149
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Configuracion de los router clase 04 agosto.ppt

  1. 1. ROUTER 3Router>Router>enRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int s0/0/0Router(config-if)#ip add 200.1.1.1 255.255.255.0Router(config-if)#no shuRouter(config-if)#exitRouter(config)#int s0/0/0Router(config-if)#cloc rateRouter(config-if)#cloc rate 64000Router(config-if)#exitRouter(config)#router eiRouter(config)#router eigrp 1Router(config-router)#netRouter(config-router)#network 172.16.1.0Router(config-router)#network 172.16.2.0Router(config-router)#network 200.1.1.0Router(config-router)#exitRouter(config)#diaRouter(config)#dial-peer voiceRouter(config)#dial-peer voice 1 voipRouter(config-dial-peer)#desRouter(config-dial-peer)#destination-pattern 9...Router(config-dial-peer)#seRouter(config-dial-peer)#session tar
  2. 2. Router(config-dial-peer)#session target ipv4:99.99.99.97Router(config-dial-peer)#exitRouter(config)#dial-peer voice 2 voipRouter(config-dial-peer)#destination-pattern 1...Router(config-dial-peer)#session target ipv4:200.1.1.3Router(config-dial-peer)#exitRouter(config)#ROUTER 2Router>enRouter#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#int s0/0/0Router(config-if)#ip add 200.1.1.3 255.255.255.0Router(config-if)#no shRouter(config-if)#%LINK-5-CHANGED: Interface Serial0/0/0, changed state to upRouter(config-if)#int s0/0/1Router(config-if)#ip add 99.99.99.99 255.255.255.0Router(config-if)#cloRouter(config-if)#clock rate 64000Router(config-if)#no sh%LINK-5-CHANGED: Interface Serial0/0/1, changed state to downRouter(config-if)#exitRouter(config)#dialRouter(config)#dial-peer voice 1 voipRouter(config-dial-peer)#deRouter(config-dial-peer)#destination-pattern 2...
  3. 3. Router(config-dial-peer)#session target ipv4:200.1.1.1Router(config-dial-peer)#exitRouter(config)#dial-peer voice 2 voipRouter(config-dial-peer)#destination-pattern 9...Router(config-dial-peer)#session target ipv4:99.99.99.97Router(config-dial-peer)#exitRouter(config)#%LINK-5-CHANGED: Interface Serial0/0/1, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/1, changed state to upRouter(config)#router eiRouter(config)#router eigrp 1Router(config-router)#netRouter(config-router)#network 192.168.1.0Router(config-router)#network 192.168.2.0Router(config-router)#network 99.99.99.0Router(config-router)#exitRouter(config)#%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 99.99.99.97 (Serial0/0/1) is up: new adjacencyRouter(config)#router eiRouter(config)#router eigrp 1Router(config-router)#network 200.1.1.1Router(config-router)#%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 200.1.1.1 (Serial0/0/0) is up: new adjacencyRouter(config-router)#network 200.1.1.0Router(config-router)#
  4. 4. ROUTER 1Router(config)#Router(config)#int s 0/0/0Router(config-if)#ip add 99.99.99.97 255.255.255.0Router(config-if)#no shuRouter(config-if)#%LINK-5-CHANGED: Interface Serial0/0/0, changed state to upRouter(config-if)#exitRouter(config-dial-peer)#dial-peer voice 1 voipRouter(config-dial-peer)#deRouter(config-dial-peer)#destination-pattern 1...Router(config-dial-peer)#seRouter(config-dial-peer)#session tarRouter(config-dial-peer)#session target ipv4:99.99.99.99Router(config-dial-peer)#exitRouter(config)#dial-peer voice 2 voipRouter(config-dial-peer)#destination-pattern 2...Router(config-dial-peer)#session target ipv4:200.1.1.1Router(config-dial-peer)#exitRouter(config)#router eiRouter(config)#router eigrp 1Router(config-router)#netRouter(config-router)#network 10.1.1.0Router(config-router)#network 10.1.2.0Router(config-router)#network 99.99.99.0
  5. 5. Router(config-router)#%DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 99.99.99.99 (Serial0/0/0) is up: new adjacencyRouter(config-router)#network 99.99.99.99Router(config-router)#

×