COMBO SILLS

374 views
264 views

Published on

0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
374
On SlideShare
0
From Embeds
0
Number of Embeds
4
Actions
Shares
0
Downloads
2
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

COMBO SILLS

  1. 1. COMBO SILL PREPS PREP 101 – 3/4" END MILL FABRICATION. SILL TO BE APPLIED TO BOTTOM OF PREP-101 FRAME. SILL SUPPLIED WITH 3 END HOLES AND 1 CENTER HOLE TO 49-1/2” “3/4” MILLED LENGTH AND 2 CENTER HOLES OVER 49- ENDS, SILL IS 1/2” LENGTH. NET 1-1/2” OVER DOOR SIZE” PRICE FOR THIS PREP $1.30 LIST PREP 102 – NON-MILLED SILL ENDS. SILL APPLIED BETWEEN FRAME LEGS WHEN STOP HAS BEEN RABBETED. SILL PREP-102 SUPPLIED WITH 2 SCREW HOLES ON ENDS AND 1 CENTER HOLE TO 49-1/2” “NO MILLED LENGTH OR 2 CENTER HOLES OVER 49- ENDS, 1/2” LENGTH. SCREW HOLES ONLY” THERE IS NO CHARGE FOR THIS PREP. L-NOTCH PREP - PREP FOR L OR TRIM NOTCHES. THIS PREP REMOVES A PORTION OF THE FRONT OF A SILL OR THRESHOLD TO ALLOW DOOR TRIM TO L- NOTCH OR RUN ALL THE WAY TO THE BOTTOM OF TRIM NOTCH THE SILL OR THRESHOLD. PRICE FOR THIS PREP IS $2.40 LIST. U-NOTCH PREP- THIS PREP REMOVES A “U” SHAPED PORTION OF A SILL OR THRESHOLD TO ALLOW THE SILL OR U- NOTCH THRESHOLD TO FIT AROUND THE STOP PORTION OF THE FRAME. IT IS ALSO “TIMELY KNOWN AS A “TIMELY NOTCH”. NOTCH” PRICE FOR THIS PREP IS $3.50 LIST. TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -4-
  2. 2. COMBO SILL PREPS MULLION PREP- USED FOR SIDELITES UNITS. CUSTOMER TO PROVIDE A DETAILED DRAWING FOR MULL PREP FABRICATION. THE MILLED AREA IS 1- 1/2” WIDE TO ACCEPT BACK TO BACK “TYPICAL FRAMES. FOR SIDELITE UNITS” PRICE FOR THIS PREP IS $4.75 LIST WOOD BLOCK PREP- 2 WOOD BLOCKS ON THE ENDS OF A NET LENGTH SILL WOOD ALLOWS THE NAILING OF THE FRAME BLOCK TO THE SILL. THE BLOCKS ARE PREP PRESSURE TREATED AND GLUED IN PLACE. PRICE FOR THIS PREP IS $5.50 LIST. FLAT FLOOR RIP - REMOVES THE FLAT FRONT LEG OF A COMBO SILL SO THE FLOOR RIP SILL CAN BE USED ON AN INTERIOR WALL WHERE THE FLOOR IS THE “RIPS SAME HEIGHT ON BOTH SIDES OF THE FRONT LIP WALL. OFF SILL” PRICE FOR THIS PREP IS $2.20 LIST TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -5-
  3. 3. COMBO INSWING SILLS S-51 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 3-5/8”- 4-7/8” WIDE FRAMES *QUIKSHIP ITEM* BLUE TAPE AVAILABLE S-56 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 4-3/8”- 5-5/8” WIDE FRAMES *QUIKSHIP ITEM* BLUE TAPE AVAILABLE DRAWINGS NOT TO SCALE TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -6-
  4. 4. COMBO INSWING SILLS PER INCH LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-51 $0.40 $0.55 $0.57 $0.67 $1.30 S-56 $0.43 $0.57 $0.60 $0.72 $1.40 COMBO INSWING SILLS PER PIECE LIST PRICE 0.8 WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-51 30” $12.00 $16.50 $17.10 $20.10 $39.00 31-1/2” $13.40 $18.13 $18.76 $21.91 $41.75 32” $12.80 $17.60 $18.24 $21.44 $41.60 33-1/2” $14.20 *$19.23 $19.90 $23.25 $44.35 36” $14.40 $19.80 $20.52 $24.12 $46.80 37-1/2” $15.80 *$21.43 $22.18 $25.93 $49.55 BLUE TAPE = ADD $0.35 PER FOOT LIST S-56 30” $12.90 $17.10 $18.00 $21.60 $42.00 31-1/2” $14.35 $18.76 $19.70 $23.48 $44.90 32” $13.76 $18.24 $19.20 $23.04 $44.80 33-1/2” $15.21 *$19.90 $20.90 $24.92 $47.70 36” $15.48 $20.52 $21.60 $25.92 $50.40 37-1/2” $16.93 *$22.18 $23.30 $27.80 $53.30 BLUE TAPE = ADD $0.36 PER FOOT LIST *HIGHLITED PRICES ARE QUICKSHIP PRODUCTS TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -7-
  5. 5. COMBO INSWING SILLS S-67 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 5-1/2”- 6-1/2” WIDE FRAMES *QUIKSHIP ITEM* BLUE TAPE AVAILABLE S-76 FINISHES MILL, BRIGHT DIP GOLD, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ USE 6-3/8”- 7-5/8” WIDE FRAMES *QUIKSHIP ITEM* BLUE TAPE AVAILABLE DRAWINGS NOT TO SCALE TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -8-
  6. 6. COMBO INSWING SILLS PER INCH LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-67 $0.54 $0.71 $0.75 $0.88 $1.55 S-76 $0.56 $0.75 $0.80 $0.93 $1.75 COMBO INSWING SILLS PER PIECE LIST PRICE 0.8 WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-67 30” $16.20 $21.30 $22.50 $26.40 $46.50 31-1/2” $17.81 $23.17 $24.43 $28.52 $49.63 32” $17.28 $22.72 $24.00 $28.16 $49.60 33-1/2” $18.89 *$24.59 $25.93 $30.28 $52.73 36” $19.44 $25.56 $27.00 $31.68 $55.80 37-1/2” $21.05 *$27.43 $28.93 $33.80 $58.93 BLUE TAPE = ADD $0.41 PER FOOT LIST S-76 30” $16.80 $22.50 $24.00 $27.90 $52.50 31-1/2” $18.44 $13.83 $26.00 $30.10 $55.93 32” $17.92 $24.00 $25.60 $29.76 $56.00 33-1/2” $19.56 *$25.93 $27.60 $31.96 $59.43 36” $20.16 $27.00 $28.80 $33.48 $63.00 37-1/2” $21.80 *$28.93 $30.80 $35.68 $66.43 BLUE TAPE = ADD $0.44 PER FOOT LIST *HIGHLITED PRICES ARE QUICKSHIP PRODUCTS TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com -9-
  7. 7. COMBO INSWING SILLS S-87 FINISHES MILL, BRONZE, WHITE STOCK LENGTH = 16’ USE 7-1/4”- 8-5/8” WIDE FRAMES BLUE TAPE AVAILABLE T-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 3-5/8”- 4-7/8” WIDE FRAMES BLUE TAPE AVAILABLE DRAWINGS NOT TO SCALE TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 10 -
  8. 8. COMBO INSWING SILLS PER INCH LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-87 $1.25 $1.40 $1.65 N/A N/A T-51 $0.69 $0.89 N/A N/A N/A COMBO INSWING SILLS PER PIECE LIST PRICE 1.3 WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL S-87 30” $37.50 $42.00 $49.50 N/A N/A 31-1/2” $40.68 $45.40 $53.28 N/A N/A 32” $40.00 $44.80 $52.80 N/A N/A 33-1/2” $43.18 $48.20 $56.58 N/A N/A 36” $45.00 $50.40 $59.40 N/A N/A 37-1/2” $48.18 $53.80 $63.18 N/A N/A BLUE TAPE = ADD $0.85 PER FOOT LIST T-51 30” $20.70 $26.70 N/A N/A N/A 32” $22.08 $28.48 N/A N/A N/A 36” $24.84 $32.04 N/A N/A N/A 48” $33.12 $42.72 N/A N/A N/A BLUE TAPE = ADD $0.45 PER FOOT LIST TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 11 -
  9. 9. COMBO INSWING SILL RISER SR-1 FINISHES MILL, BRONZE, SATIN NICKEL, WHITE STOCK LENGTH = 16’ 9/16” SILL RISER FOR COMBO SILL OVERALL HEIGHT 1- 11/16” DRAWINGS NOT TO SCALE TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 12 -
  10. 10. COMBO INSWING SILL RISER PER INCH LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL SR-1 $0.19 $0.26 $0.27 $0.30 $0.44 COMBO INSWING SILL RISER PER PIECE LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL SR-1 30” $5.70 $7.80 $8.10 $9.00 $13.20 32” $6.08 $8.32 $8.64 $9.60 $14.08 36” $6.84 $9.36 $9.72 $10.80 $15.84 42” $7.98 $10.92 $11.34 $12.60 $18.48 48” $9.12 $12.48 $12.96 $14.40 $21.12 60” $11.40 $15.60 $16.20 $18.00 $26.40 72” $13.68 $18.72 $19.44 $21.60 $31.68 TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 13 -
  11. 11. WATER RETURN INSWING SILLS W-51 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 4-3/8”- 5-1/2” WIDE FRAMES BLUE TAPE AVAILABLE W-67 FINISHES MILL, BRONZE STOCK LENGTH = 16’ USE 5”- 6-1/4” WIDE FRAMES BLUE TAPE AVAILABLE WATER RETURN SILL PAN 30 GA. GALVANIZED “STANDARD SILL PAN IS 6” LONGER THAN SILL.” DRAWINGS NOT TO SCALE TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 14 -
  12. 12. WATER RETURN INSWING SILLS PER INCH LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL W-51 $0.49 $0.67 N/A N/A N/A W-67 $0.56 $0.78 N/A N/A N/A SILL PAN $0.046 N/A N/A N/A N/A WATER RETURN INSWING SILLS PER PIECE LIST PRICE WHITE MILL BRONZE POWDER BRIGHT SATIN PROFILE FINISH ANODIZED COAT DIP GOLD NICKEL W-51 30” $14.70 $20.10 N/A N/A N/A 32” $15.68 $21.44 N/A N/A N/A 36” $17.64 $24.12 N/A N/A N/A 73” $35.77 $48.91 N/A N/A N/A W-67 30” $16.80 $23.40 N/A N/A N/A 32” $17.92 $24.96 N/A N/A N/A 36” $20.16 $28.08 N/A N/A N/A 73” $40.88 $56.94 N/A N/A N/A TOLL FREE (888) 237-7455 FAX (831) 674-3949 sales@centralcoastbuildingsupply.com - 15 -

×