Embedded Systems,Embedded Systems Project,Winter training,


Published on

like our page for more updates:

With Best Regard's
Technogroovy Systems India Pvt. Ltd.
Call- +91-9582888121
Whatsapp- +91-8800718323

Published in: Education
  • Be the first to comment

No Downloads
Total views
On SlideShare
From Embeds
Number of Embeds
Embeds 0
No embeds

No notes for slide
  • Intel’s x86: 8086,8088,80386,80486, Pentium
    Motorola’s 680x0: 68000, 68010, 68020,68030,6040
  • Embedded Systems,Embedded Systems Project,Winter training,

    1. 1. Techogroovy Systems India Pvt Ltd , www.technogroovy.com, Cell- +917500347448 , +91-7533940322 Mail : technogroovy@gmail.com
    2. 2. • The embedded system is a combination of computer hardware, software additional electrical & mechanical parts • A computer is used in such devices primarily as a means to simplify the system design and to provide flexibility. • Embedded systems employ the use of a RTOS (Real-Time Operating System). www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    3. 3. Block Diagram of Embedded System www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    4. 4. Microcontroller • A smaller computer. • On-chip RAM, ROM, I/O ports... • Example:- Motorola’s 6811, Intel’s 8051 and PIC 16X CPU RAM ROM I/O Port Serial Timer COM Port Microcontroller A single chip www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    5. 5. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    6. 6. The 8051 Microcontroller : • The 8051 is the first microcontroller of the MCS-51 family introduced by Intel Corporation at the end of the 1970’s. • The 8051 family characteristics: ○ The 8051 family characteristics: ○ 4K Bytes ROM ○ 128 Bytes RAM ○ two timer/counters (16 bit) ○ A serial port ○ 32 input/output port ○ Interrupt controller www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    7. 7. 8051 Internal Architecture www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    8. 8. IC 8051 Pin Description Voltage Supply (+5V) Ground www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    9. 9. IC 8051 Pin Description Port 0 from Pin-39 to Pin-32 An 8-bit open drain bidirectional port. DUAL FUNCTION Used to access both data and address www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    10. 10. IC 8051 Pin Description Port 1 from Pin-1 to pin-8 8-bit bidirectional I/O port with internal pull-ups www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    11. 11. IC 8051 Pin Description Port 2 from Pin-21 to pin-28 Used to access address and I/O www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    12. 12. IC 8051 Pin Description P3.0 : RxD(serial input port) P3.1 :TxD (serial output port) P3.2 :INT0 (external interrupt 0) P3.3 :INT1 (external interrupt 1) P3.4 :T0 (timer 0 external input) P3.5 :T1 (timer 1 external input) P3.6 :WR (external data memory write strobe) P3.7 :RD (external data memory read strobe) Port 3 from Pin-10 to Pin-17 www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    13. 13. IC 8051 Pin Description External memory reset Add. Latch enable Program Store Enable crystal www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    14. 14. IC 8051 Daily Applications Moving message display 7 Digital clock www.technogroovy.com, Cell- +91-7500347448 , +917533940322 segment display Traffic Light
    15. 15. IC 8051 Addressing Modes •Immediate addressing modes ADD A, #23h (Add immediate data to Acc) •Register addressing modes ADD A, R2 (Add register to Accumulator) •Direct addressing modes ADD A, 40h (Add data at location 40h to Accumulator) •Register Indirect addressing modes ADD A,@R2 (Add indirect RAM to Acc) www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    16. 16. Interrupts in 8051  An interrupt is an external or internal event that interrupts the microcontroller to inform it that a device needs its service  The advantage of interrupts is that the microcontroller can serve many devices (not all at the same time) Program Program Interrupt service time www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    17. 17. Interrupts in 8051 EA - ET2 ES ET1 EX1 Internal Interrupts EX0 ET0 EX1 ET1 ES ET2 -EA Enables or disables external interrupt Enables or disables timer 0 overflow interrupt Enables or disables external interrupt 1 Enables or disables timer 1 overflow interrupt Enables or disables the serial port interrupt Enables or disables timer 2 overflow or capture interrupt Not implemented, reserved for future use Disables all interrupts External Interrupts P3.2 :INT0 (external interrupt 0) P3.3 :INT1www.technogroovy.com,1) (external interrupt Cell- +91-7500347448 , +917533940322 ET0 EX0
    18. 18. General Purpose Microprocessor • CPU for Computers • No RAM, ROM, I/O on CPU chip itself • Example--Intel’s x86: 8086,8088,80386,80486, Pentium CPU GeneralPurpose Microprocessor Data Bus RAM Many chips on mother board ROM I/O Port Timer Address Bus General-Purpose Microprocessor System www.technogroovy.com, Cell- +91-7500347448 , +917533940322 Serial COM Port
    19. 19. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    20. 20. The 8085 Microprocessor : • • • • • • • The features of INTEL 8085 are : It is an 8 bit processor. It is a single chip N-MOS device with 40 pins. It has multiplexed address and data bus.(AD0-AD7). It works on 5 Volt dc power supply. The maximum clock frequency is 3 MHz while minimum frequency is 500kHz. It provides 74 instructions with 5 different addressing modes. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    21. 21. IC 8085 Pin Description www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    22. 22. IC 8085 Pin Description •AD0-AD7: Multiplexed Address and data lines. •A8-A15: Tri-stated higher order address lines. •ALE: Address latch enable is an output signal.It goes high when operation is started by processor . •S0,S1: These are the status signals used to indicate type of operation. •RD¯: Read is active low input signal used to read data from I/O device or memory. •WR¯: Write is an active low output signal used write data on memory or an I/O device. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    23. 23. IC 8085 Pin Description • READY: This an output signal used to check the status of output device.If it is low, µP will WAIT until it is high. • TRAP: It is an Edge triggered highest priority , non mask able interrupt. After TRAP, restart occurs and execution starts from address 0024H. • RST 5.5,6.5,7.5: These are maskable interrupts and have low priority than TRAP. • INTR¯&INTA: INTR is a interrupt request signal after which µP generates INTA or interrupt acknowledge signal. •IO/M¯: This is output pin or signal used to indicate whether 8085 is working in I/O mode(IO/M¯=1) or Memory mode(IO/M¯=0 ). www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    24. 24. IC 8085 Pin Description •HOLD&HLDA: HOLD is an input signal .When µP receives HOLD signal it completes current machine cycle and stops executing next instruction. In response to HOLD µP generates HLDA that is HOLD Acknowledge signal. •RESET IN¯: This is input signal. When RESET IN¯ is low µp restarts and starts executing from location 0000H. •SID: Serial input data is input pin used to accept serial 1 bit data . •X1 & X2 : These are clock input signals and are connected to external LC,or RC circuit.These are divide by two so if 6 MHz is connected to X1X2, the operating frequency becomes 3 MHz. •VCC & VSS: Power supply VCC=+ -5Volt& VSS=-GND reference. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    25. 25. 8085 Internal Architecture www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    26. 26. Arithmetic and Logical Group Accumulator: It is 8 bit general purpose register. It is connected to ALU. So most of the operations are done in Acc. Temporary register: All the arithmetic and logical operations are done in the temporary register but user can’t access it. Flag: It is a group of 5 flip flops used to know status of various operations done. The Flag Register along with Accumulator is called PSW or Program Status Word. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    27. 27. Arithmetic and Logical Group Flag is given by : S Z - AC - P - S: Sign flag is set when result of an operation is negative. Z: Zero flag is set when result of an operation is 0. Ac: Auxiliary carry flag is set when there is a carry out of lower nibble or lower four bits of the operation. CY: Carry flag is set when there is carry generated by an operation. P: Parity flag is set when result contains even number of 1’s. Rest are www.technogroovy.com, Celldon’t care flip flops. +91-7500347448 , +917533940322 CY
    28. 28. Register Group Temporary registers (W,Z): These are not available for user. These are loaded only when there is an operation being performed. General purpose: There are six general purpose registers in 8085 namely B,C,D,E,H,L These are used for various data manipulations. Special purpose : There are two special purpose registers in 8085: SP : (Stack Pointer) This is a temporary storage memory 16 bit register. Since there are only 6 general purpose registers, there is a need to reuse them PC: (Program Counter) It is 16 bit register used to point the location from which the next instruction is to be fetched. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    29. 29. IC 8085 Addressing modes Immediate addressing: Immediate data is transferred to address or register. Example : MVI A,20H Register addressing: Data is transferred from one register to other. Example : MOV A, C Indirect addressing: Data is transferred from address pointed by the data in a register to other register or vice-versa. Example: MOV A, M Implied addressing: These doesn’t require any operand. The data is specified in Opcode itself. Example: RAL: Rotate left with carry. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    30. 30. Interrupts in 8085  An interrupt is considered to be an emergency signal that may be serviced. The Microprocessor may respond to it as soon as possible. Interrupts can also be classified into:   Maskable Interrupts (Can be delayed or Rejected) Non-Maskable Interrupts (Can not be delayed or Rejected) The 8085 has 5 interrupt inputs. The INTR input : INTR is mask-able using the EI/DI instruction pair. RST 5.5, RST 6.5, RST 7.5 : They are all mask-able. TRAP : is the only non-mask-able interrupt in the 8085 www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    31. 31. Interrupts in 8085 The 8085 recognizes 8 RESTART instructions: RST0 - RST7 . Each of these would send the execution to a predetermined hard-wired memory location: Restart Instruction Equivalent to RST0 CALL 0000H RST1 CALL 0008H RST2 CALL 0010H RST3 CALL 0018H RST4 CALL 0020H RST5 CALL 0028H RST6 CALL 0030H RST7 CALL 0038H www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    32. 32. Timing and State Diagram • • The µP operates with reference to clock signal. The rise and fall of the pulse of the clock gives one clock cycle. Each clock cycle is called a T state and a collection of several T states gives a machine cycle. Important machine cycles are : 1. 2. 3. 4. 5. Op-code fetch. Memory read. Memory write. I/Op-read. I/O write. • www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    33. 33. Timing and State Diagram Op-code fetch cycle : www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    34. 34. Seven Segment Display Seven segments are electronic components that can be used to displaying alphanumeric characters, 7 LED are used (as shown in figure) and is designed from a dot-point with the size. pin configuration of seven segment www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    35. 35. Seven Segment Display 7 pins of the microcontroller are used to shape the character of your LED display Port Relations Microcontroller with pin 7 Segment www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    36. 36. Seven Segment Display Table 1. Configuring the Character 7 Segment Data www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    37. 37. 8051 Microcontroller Design Softwares www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    38. 38. Software’s Used Keil µVision Top View Simulator www.technogroovy.com, Cell- +91-7500347448 , +917533940322 Express PCB
    39. 39. Keil µVision IDE  The µVision IDE from Keil combines project management, make facilities, source code editing, program debugging, and complete simulation in one powerful environment. The µVision development platform is easy-to-use and helping you quickly create embedded programs that work. The µVision editor and debugger are integrated in a single application that provides a seamless embedded project development environment. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    40. 40. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    41. 41. Top View Simulator • Topview Simulator gives an excellent simulation environment for MCS 51 Microcontroller.  A beginner can learn about 8051 based embedded solutions without any hardware. An experienced designer, you may find most of the required facilities built in the simulator that enabling  you to complete your next project without waiting for the target hardware.  www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    42. 42. Top View Simulator A Top View Simulator Program www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    43. 43. Express PCB Express PCB allows you to design schematics and PCB's. It is ideal for those that are looking to design anywhere from a two to four layer circuit board. A drop and drag design allows users to pick the components of the circuit board and drop it onto the circuit board in the software program. The designer can then place various pins in the circuit board to show where things need to be connected. It also has the ability of the program to show the designer where there are flaws in their design. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    44. 44. Express PCB This way we can include resistors This way we can include different kind of IC’s www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    45. 45. DC Motor interfacing with Microcontrollers DC motors are always preffered over stepper motors. There are many things which we can do with our DC motor when interfaced with microcontroller. For example: we can control the speed of motor, we can control the direction of rotation, we can also do encoding of the rotation made by DC motor i.e. keeping track of how many turns are made by our motors etc. Usually H-bridge is preffered way of interfacing a DC motor. L293D is most used H-Bridge driver IC. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    46. 46. Working of H-Bridge The name "H-Bridge" is derived from the actual shape of the switching circuit which control the motion of the motor. It is also known as "Full Bridge". Basically there are four switching elements in the H-Bridge as shown www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    47. 47. Truth Table For H-Bridge Truth Table High Left High Right Low Left Low Right Description On Off Off On Motor runs clockwise Off Motor runs anticlockwise Off Motor stops or decelerates On Motor stops or decelerates Off On Off On On Off On Off On www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    48. 48. Stepper Motor Of all motors, step motor is the easiest to control. It's handling simplicity is really hard to deny - all there is to do is to bring the sequence of rectangle impulses to one input of step controller and direction information to another input. Direction information is very simple and comes down to "left" for logical one on that pin and "right" for logical zero. Motor control  is also very simple - every impulse makes the motor operating for one step and if there is no impulse the motor won't start. Pause between impulses can be shorter or longer and it defines revolution rate. This rate cannot be infinite because the motor won't be able to "catch up" with all the impulses (documentation on specific motor should contain such information).. www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    49. 49. Interfacing of Stepper motor with 8051 www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    50. 50. Clock-wise Rotation of the Coils Truth table 1 2 3 4 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 www.technogroovy.com, Cell- +91-7500347448 , +917533940322
    51. 51. Techogroov y Systems India Pvt Ltd , www.technogroovy.com, Cell- +91-7500347448 , +917533940322 Mail : technogroovy@gmail.com