Take-up roller                Customer manual




Take-up roller

                        Customer manual




            ...
Take-up roller                                                    Customer manual




Instructions for brand and copyright...
Take-up roller                                        Customer manual




                              Introduction
     ...
Take-up roller                                                         Customer manual



                                ...
Take-up roller                                          Customer manual



            Chapter 1      Brief introduction o...
Take-up roller                                        Customer manual



           Chapter 2          General information...
Take-up roller                                         Customer manual




3.3 Setting up




                            ...
Take-up roller                                                     Customer manual




                    Take-up roller ...
Take-up roller                                                    Customer manual




                        Back-view of...
Take-up roller                                             Customer manual


                              Handle tight bo...
Take-up roller                                       Customer manual




Attention: All the parts (configuration, color) i...
Take-up roller                                           Customer manual




                          Chapter 4: Instruct...
Upcoming SlideShare
Loading in...5
×

Large format printer take up roller customer manual

716

Published on

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
716
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
1
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Large format printer take up roller customer manual

  1. 1. Take-up roller Customer manual Take-up roller Customer manual 1
  2. 2. Take-up roller Customer manual Instructions for brand and copyright All copyrights and brands are reserved by Hangzhou Maxunion Digital Device Corp. Ltd All copyrights of the parts of this product, including all the fittings and software are possessed by Hangzhou Maxunion Digital Device Corp. Ltd. It is illegal to copy、 transform or put to other uses of this product without permission of the company. All the specification and information of the products mentioned in the manual are just for reference and subject to upgrading without extra informing. (All rights are reserved by Hangzhou Maxunion Digital Device Corp. Ltd) All copyrights are reserved, no copy is allowed 2
  3. 3. Take-up roller Customer manual Introduction Thank you for buying the Take-up roller produced by Hangzhou Maxunion Digital Device Corp. Ltd. Before you use this product, please read this manual carefully in advance and keep it appropriately afterwards so as to make best use of the product. If you have any problem with the performances of the products or accidents occur, please refer to the manual. Hangzhou Maxunion Digital Device Corp. Ltd will offer one year warranty by feed back your products. If you have any problem, please contact the maintenance shops designated by the company or call the company directly. 3
  4. 4. Take-up roller Customer manual Catalogue Chapter 1 Brief introduction of the manual ................................5 1.1 Usage ........................................................................5 1.2 Direction ....................................................................5 1.3 Outline ...................................................................... 5 Chapter 2 General information of the product.............................6 2.1 Brief introduction of the product ..................................6 2.2 Instruction for specialty and specification .....................6 2.2.1 Main characters.........................................................6 2.2.2 Specification ............................................................6 Chapter 3 Hardware installation................................................ 7 3.1 Choosing working environment.................................... 7 3.2 Checking................................................................... 7 3.3 Setting up ................................................................ 8 Chapter 4 Instruction .............................................................. 13 4.1 Instruction .................................................................... 13 4
  5. 5. Take-up roller Customer manual Chapter 1 Brief introduction of the manual Thank you for buying the Take-up roller produced by Hangzhou Maxunion Digital Device Corp. Ltd. This manual shows how to setup and use this product correctly in detail. Please read this manual carefully before you begin to setup and use this product for a comprehensive understanding so as to avoid unnecessary damage. 1.1 Usage This book is to help you familiarize and correctly use Maxunion Digital take-up roller! 1.2 Direction The Take-up roller mentioned in this book, if not point out, refers to the very Take-up roller produced by Hangzhou Maxunion Digital Device Corp. Ltd. 1.3 Outline Chapter 1: Brief introduction of the manual. Chapter 2: General information of the product:Concisely show the main characters and specification of the dyer machine. Chapter 3: Hardware installation:Help you install dryer machine. Chapter 4: Instruction:Help you correctly use this product. 5
  6. 6. Take-up roller Customer manual Chapter 2 General information of the product 2.1 Brief introduction of the product This new take-up roller is especially designed for users who require high efficiency and convenient performance. It is quite practical and easy to operate. With good bearing and flexible width adjustment, it offer you flexible and swift printing! Besides, it is easy to setup and use. People without any special skills can handle it freely, meeting various demands of any user. 2.2 Instruction for specialty and specification 2.2.1 Applicable Machine It is applicable for all Series of Roland Pro II III IV. 2.2.2 Main characters It has unique design with Roland ledge of stand as its sliding track and strong bearing. It can adjust media width flexibly with slide roller. It is easy to handle. It is suitable for media of 2”/3” inner diameter It can be inductive take-up by rolls with sensor or handled by hands 2.2.3 Specification It is applicable to all machines of all sizes Chapter 3 Hardware installation 3.1 Choosing working environment In order to keep the take-up roller operating stably, a suitable working environment should be chosen, which should have requirements as follows: Avoid too moist and too much dust Avoid using the same power supply with other wiring so as to keep stable power supply Ensure the using voltage meet demands as required 3.2 Checking Open the carton carefully, and check if all parts in the carton are in accordance with those of the following table Part name Part model Part number Take-up roller(left part) (1) Take-up roller(right part) (1) Power cable (1) Infrared ray sensor (1) Customer manual (1) 6
  7. 7. Take-up roller Customer manual 3.3 Setting up Take-up roller(right) Power cable plug Take-up roller(left) Infrared ray sensor This picture is the fixed configuration sketch map of the take-up roller. Following is the detailed steps of setting up the take-up roller: Step1: disassemble the bottom plate of left part and the right part of the take-up roller. 7
  8. 8. Take-up roller Customer manual Take-up roller (left) Dismantle solution process Take-up roller(right) Dismantle solution process Step2: fix the disassembled roller part on the middle ledge ( Arrowhead in diagram for install the direction of bolt,The bolt of usage dismantles the bolt of solution for the square one) As follows diagram: 8
  9. 9. Take-up roller Customer manual Back-view of take-up roller (fixed on printer) Step3: make sure the both part of roller are fixed in the right place on the ledge: first fix the right part roller: you can insert the small limiting-plate (metal sheet) in right of the ledge, then move the right-part of roller to the right side and have the handle-screws fixed. (If media is far away of zero limits line, you can moving the right-part roller directly to an appropriate place and having the handle-screws fixed); Then, after fixing one side of the media scroll on the right side, move the left part of roller and fix the side of the media scroll and have the screws fixed. Is shown as diagram below: 9
  10. 10. Take-up roller Customer manual Handle tight bolt Step4: fix the Infrared ray sensor: plug the tie -in of the Infrared ray sensor into the control box (right-part of roller), with the head of the Infrared ray sensor facing the paper (The arrow in the picture shows the direction). The Infrared ray sensor should be placed within the scope of the scroll of the media. (Otherwise the location of the media will not be detected) Infrared ray sensor Follow picture refer to completed assemble of the take-up roller, within work appearance: 10
  11. 11. Take-up roller Customer manual Attention: All the parts (configuration, color) in the setting up sketch map do not totally represent actual product, please refer to the actual products as standard. 11
  12. 12. Take-up roller Customer manual Chapter 4: Instruction 4.1 Instruction First adjust the right part of take-up roller to an appropriate place and have the screws fixed. Please refer to the following picture. Pull out the left part of take-up roller and insert the paper scroll in the right take-up roller. Then adjust the left take-up roller and have he screws fixed. Turn on the power button and get the power supply. Please press the bottom of “up and down” to adjust the placement of the media. 12

×