• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
REMOTE POWER FAILURE INDICATOR WITH GSM(SMS MESSAGE)
 

REMOTE POWER FAILURE INDICATOR WITH GSM(SMS MESSAGE)

on

  • 562 views

INTRODUCTION ...

INTRODUCTION
MaasTech‘s “Remote power failure Indicator” is designed to provide reliable monitoring of power supply to an equipment and if power supply is not available to the equipment it alerts the user by sending SMS and CALL alerts.
NEED FOR RPFI
In most of the industries, colleges & hospitals we have some equipment which needs power 24X7 days. So it will be connected to a UPS system. In case if the Battery is about to dry and the power are lost then it becomes a problem.
In such cases our panel monitors the power to such equipment and alerts the user when the power supply fails or when the system is running on UPS. So that the corresponding person can know that the system is running on UPS and necessary actions can be taken.
Our unit has provision to give alert, when the power is regained. In addition to this it has a provision to alert on 8 fault conditions through “NC”, “NO” contacts.
EXAMPLES:
• Tank overflow condition
• Door open condition
• Gas Leakage condition
• Human detection condition
• HOSPITAL AUTOMATION
• LAB EQUIPEMENT(EDUCATION)
• ICE FACTORY
• IT INDUSTRIES-UPS STATUS MONITORING


thanks
R.ASHOK KUMAR
MAASTECH
89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK)
KODAMBAKKAM
CHENNAI-600024

PH:044-24844676
ASHOK KUMAR-098402 34766

Statistics

Views

Total Views
562
Views on SlideShare
562
Embed Views
0

Actions

Likes
0
Downloads
6
Comments
0

0 Embeds 0

No embeds

Accessibility

Upload Details

Uploaded via as Microsoft Word

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    REMOTE POWER FAILURE INDICATOR WITH GSM(SMS MESSAGE) REMOTE POWER FAILURE INDICATOR WITH GSM(SMS MESSAGE) Document Transcript

    • 1 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 REMOTE POWER FAILURE INDICATOR WITH GSM SMS ALERT SYSTEM INTRODUCTION MaasTech„s “Remote power failure Indicator” is designed to provide reliable monitoring of power supply to an equipment and if power supply is not available to the equipment it alerts the user by sending SMS and CALL alerts. NEED FOR RPFI
    • 2 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 In most of the industries, colleges & hospitals we have some equipment which needs power 24X7 days. So it will be connected to a UPS system. In case if the Battery is about to dry and the power are lost then it becomes a problem. In such cases our panel monitors the power to such equipment and alerts the user when the power supply fails or when the system is running on UPS. So that the corresponding person can know that the system is running on UPS and necessary actions can be taken. Our unit has provision to give alert, when the power is regained. In addition to this it has a provision to alert on 8 fault conditions through “NC”, “NO” contacts. EXAMPLES: Tank overflow condition Door open condition Gas Leakage condition Human detection condition HOSPITAL AUTOMATION LAB EQUIPEMENT(EDUCATION)
    • 3 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 ICE FACTORY IT INDUSTRIES-UPS STATUS MONITORING 1.1 Operation: Once the unit is armed and configured, upon any input the unit it will send 5 SMS to each mobile Numbers stored in memory. Additionally it makes call to the mobile numbers stored in memory to indicate the event 2.1 Configuration: Insert the SIM Card into the GSM Board on the space provided. Connect the sensor Wirings and indicated on the panel wiring diagram. Connect the battery terminals to the circuit and switch on the Power supply. After power up, the unit waits for the NOS Command for storing the mobile numbers to memory. It wont accept any other command other than NOS. The unit is accessible to only those numbers which are programmed through NOS Command. After the successful completion of NOS Command other commands can be sent by the user to process. The unit always replies to the command sent by the user. If the reply is not received then the user must send the request again to accomplish the task. 3.1 Command and its Reply: All the commands must be typed and sent to the unit as SMS Message. 3.1.1 NOS Command: This Command is used to store the mobile numbers to the Unit’s Memory. A Maximum of 5 Numbers can be stored. For security reasons, the unit is accessible to only those mobile numbers which are programmed through NOS Command.
    • 4 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 The Same NOS Command is used to change the Mobile Nos later on, which requires a Login command.(Refer Section 3.1.17). The old mobile Numbers will be overwritten by the New Mobile Numbers and this action is conveyed to the Old Mobile Numbers. Format: Nos MobileNumber1 MobileNumber2 ……. MobileNumber5 Example: NOS +919999999999 +919999999999 +919999999999 +919999999999 +919999999999 Reply: After the successful completion of the command the unit will send the feedback SMS: NOS Stored to Memory. If reply is not received try resending the Message 3.1.2 MSG1 Command: This command is used to change the text message for Zone one. Default Messages is “Zone 1 Alert” Format: MSG1 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG1 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 1 Assigned. If reply is not received try resending the Message 3.1.3 MSG2 Command: This command is used to change the text message for Zone two. Default Messages is “Zone 2 Alert”
    • 5 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 Format: MSG2 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG2 Front Window Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 2 Assigned. If reply is not received try resending the Message 3.1.4 MSG3 Command: This command is used to change the text message for Zone three. Default Messages is “Zone 3 Alert” Format: MSG3 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG3 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 3 Assigned. If reply is not received try resending the Message 3.1.5 MSG4 Command: This command is used to change the text message for Zone four. Default Messages is “Zone 4 Alert” Format:
    • 6 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 MSG4 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG4 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 4 Assigned. If reply is not received try resending the Message 3.1.6 MSG5 Command: This command is used to change the text message for Zone five. Default Messages is “Zone 5 Alert” Format: MSG5 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG5 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 5 Assigned. If reply is not received try resending the Message 3.1.7 MSG6 Command: This command is used to change the text message for Zone six. Default Messages is “Zone 6 Alert” Format: MSG6 <Text Message>
    • 7 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 <Text Message> Maximum of 25 Characters Example: MSG6 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 6 Assigned. If reply is not received try resending the Message 3.1.8 MSG7 Command: This command is used to change the text message for Zone seven. Default Messages is “Zone 7 Alert” Format: MSG7 <Text Message> <Text Message> Maximum of 25 Characters Example: MSG7 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 7 Assigned. If reply is not received try resending the Message 3.1.9 MSG8 Command: This command is used to change the text message for Zone eight. Default Messages is “Zone 8 Alert” Format: MSG8 <Text Message>
    • 8 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 <Text Message> Maximum of 25 Characters Example: MSG8 Front Door Opened Reply: After the successful completion of the command the unit will send the feedback SMS: Message 8 Assigned. If reply is not received try resending the Message 3.1.10 EMSGHI Command: This command is used to change the text message for Emergency Alert input when the input is high. Default Messages is “AC Power Failure. UPS ON.” Format: EMSGHI <Text Message> <Text Message> Maximum of 25 Characters Example: EMSGHI Emergency Alert High Reply: After the successful completion of the command the unit will send the feedback SMS: Emergency Message Assigned. If reply is not received try resending the Message 3.1.11 EMSGLO Command: This command is used to change the text message for Emergency Alert input when the input is Low. Default Messages is “AC Power ON.” Format: EMSGLO <Text Message>
    • 9 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 <Text Message> Maximum of 25 Characters Example: EMSGLO Emergency Alert Low Reply: After the successful completion of the command the unit will send the feedback SMS: Emergency Message Assigned. If reply is not received try resending the Message 3.1.12 AlarmON Command: This command is used to Activate an hooter alarm for 5 minutes. Format: ALARMON Example: ALARMON Reply: After the successful completion of the command the unit will send the feedback SMS: Alarm ON If reply is not received try resending the Message 3.1.13 ON Command: This command puts the GSM Unit into ON mode. Note: Individual zones can be switched ON. Format: ON ALL (or) ON <individual zones nos separated by spaces> Example: ON ALL ON 1 3 7 ON 2 5 8 6
    • 10 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 Reply: After the successful completion of the command the unit will send the feedback SMS: Unit ON If reply is not received try resending the Message 3.1.14 SAT Command: This command sets activation time in seconds for the First Zone only. Format: SAT <secs> Example: SAT 300 Reply: After the successful completion of the command the unit will send the feedback SMS: SAT Updated If reply is not received try resending the Message 3.1.15 SDT Command: This command sets Delay time in seconds for the First Zone only. Format: SDT <secs> Example: SDT 300 Reply: After the successful completion of the command the unit will send the feedback SMS: SDT Updated If reply is not received try resending the Message 3.1.16 OFF Command: This command puts the GSM Unit into OFF mode. Note: Individual zones can the switched OFF.
    • 11 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 Format: OFF ALL (or) OFF <individual zones nos separated by spaces> Example: OFF ALL OFF 1 3 7 OFF 2 5 8 6 Reply: After the successful completion of the command the unit will send the feedback SMS: Unit OFF If reply is not received try resending the Message 3.1.17 GETBAL Command: This command is used to get the available balance amount in the SIM card (for Prepaid Cards) Format: GETBAL <query> Example: (GETBAL *123#) for airtel/bsnl sim card (GETBAL *141#) for vodafone sim card (GETBAL *111#) for aircel sim card Reply: After the successful completion of the command the unit will send the feedback SMS: Actual Balance and Validity If reply is not received try resending the Message 3.1.18 Login Command: This command is used to Login to the Unit for changing Mobile numbers and Password. The Logged in mobile number is sent to the other users stating that the particular user has logged in. Format: LOGIN <password>
    • 12 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 Default password is 1234. We can change it later using Setpass command (Refer section 3.1.18) Example: LOGIN 1234 Reply: After the successful completion of the command the unit will send the feedback SMS: You have Logged in (or) Wrong Password If reply is not received try resending the Message 3.1.19 Setpass Command: This command is used to set the new password for Logging into the system Format: SETPASS <password> Example: SETPASS 6759 Reply: After the successful completion of the command the unit will send the feedback SMS: Password Assigned If reply is not received try resending the Message 3.1.20 Logout Command: This command is used to Logout from the system Format: LOGOUT Example: LOGOUT Reply: After the successful completion of the command the unit will send the feedback SMS: You have been Logged OUT.
    • 13 MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 If reply is not received try resending the Message Note: 1) After logging in, if there is no activity for 20 minutes then you will be automatically logged out from the system. You will get a feedback SMS: No Activity. You have been Logged OUT Automatically. thanks R.ASHOK KUMAR MAASTECH 89. RANGARAJAPURAM MAIN ROAD(NEAR SBI BANK) KODAMBAKKAM CHENNAI-600024 PH:044-24844676 ASHOK KUMAR-098402 34766/098841 01622 *********** ********* ******* ***** *** *