► A Fortune 200 Company – (#182)
► A global maker of paints, coatings, optical
products, specialty
materials, chemicals, g...
► Approximately 39,000 employees
► In more than 70 countries PPG
Presence
► Composed of 12 businesses in 5 segments:
> Performance Coatings
– Aerospace
– Architectural Coatings – Americas & Asia P...
Performance Coatings:
Architectural Coatings Americas & Asia/Pacific
Performance Coatings:
Automotive Refinish
Industrial Coatings:
Packaging Coatings
Performance Coatings:
Protective & Marine Coatings
Industrial Coatings:
Automotive OEM Coatings
Industrial Coatings: Industrial Coatings
Architectural Coatings - EMEA:
Europe, Middle East, Africa
Optical & Specialty Materials:
Optical Products
Optical & Specialty Materials:
Silicas
Glass: Flat Glass
Glass: Fiber Glass
Commercial High
Performance Coatings
100% Acrylic Direct to Metal Industrial Enamel
Product Type
• 90-306/406 Safety Red
• 90-310/410 Safety Blue
• 90-311/411 ...
• Direct to metal application
• Available in Satin and Gloss
• Excellent color and gloss retention
• Primer/Finish availab...
100% Acrylic High Performance DTM Industrial Enamel
Product Type
• 90-1110 Satin
• 90-1210 Semi-Gloss
• 90-1310 Gloss
Prod...
• Excellent adhesion for true DTM performance
• Improved color, and gloss retention versus most
alkyds, water-base and two...
100% Acrylic High Performance Direct to Metal Exterior Dry Fog
Product Type
• 90-810 Neutral Base
• 90-811 White Base
• 90...
• Direct to Metal High Performance Semi-Gloss
• Exterior dry fog
• Dry fog at 10-15 feet (75°/ 50% RH)
• Low VOC - .71 lbs...
PPG Waterborne Epoxy
Two Component Waterborne Polyamide Epoxy
Product Type
• 98-1 Porcelain White
• 98-2 Black
• 98-3 Light Gray
• 98-4 ASA #49...
• Waterborne Polyamide Epoxy
• Gloss & Semi-Gloss Sheens
• VOC - 2.2 lbs/gal. (271 g/L)
• Spray, brush, roller application...
ANTI-SLIP SAFETY FLOORING PRODUCT LINE
Safety
Non-Skid coatings can help
improve the safety of the
work environment
Walkways, stairs, and
generally any public ac...
Did You Know Slips and Falls
in the Workplace…
• Cause 250,000 injuries &
800 fatalities each year
• Cost $30,000 per inci...
Coefficient of Friction (COF):
The ratio of the force that maintains contact
between an object and a surface and the
frict...
OSHA:
• Requires a value of 0.5 COF
in the workplace
ADA (Americans with
Disabilities Act):
• Recommends 0.6 COF
for walkw...
BACK TO BASICS
Coefficient of Friction (COF)
More Basics:
• Slips happen where there is
too little friction or traction
be...
#1 - Water
COMMON CAUSES OF SLIPS AND FALLS
#2 - Chemical or Oil spills
COMMON CAUSES OF SLIPS AND FALLS
#3 - Dirt and debris
COMMON CAUSES OF SLIPS AND FALLS
Because PPG Anti-Slip Safety
Coatings Were Developed to
Withstand:
•“Controlled crash” of 30 ton
F-14 Tomcats landing at
s...
PPG ANTI-SLIP TECHNOLOGY
The Technology:
Constant profile and aluminum oxide gives PPG safety coatings its extreme anti-
s...
Aluminum Oxide on the Moh’s Hardness Scale
• Single component, water-based
acrylic anti-slip.
• Low VOC and fast cure.
• Apply to: wood, asphalt, metal
and concrete....
• Two component, water-based
epoxy anti-slip.
• Low VOC
• Can be applied to dry or damp
surfaces.
• Suitable for barefoot ...
• Single component epoxy ester
• Excellent chemical resistance to:
- oils, gasoline, acids, and most
solvents
• Ideal for ...
• Two component epoxy
• Great for heavy rolling traffic and
heavy impacts
• Excellent chemical resistance to:
- oils, gaso...
• 100% solids two component epoxy
• Great where odor and solvents
are a concern
• Excellent chemical resistance to:
- oils...
44
Premium
Formulated for patching larger
cracks, voids and openings on
masonry and stucco surfaces
Compatible with acryli...
45
High-build primer
Resists wind-driven rain as part
of a three-coat system
Can help earn LEED 2009
credits*
Alkali-resis...
46
Fast-drying, clear or pigmented
waterborne acrylic sealer
Penetrates and seals new, porous
surfaces and old, dusty or c...
47
Clear, penetrating,
non-film-forming sealer
Water repellant
Lengthens substrate life and
reduces maintenance costs
Main...
48
100% acrylic, high-build elastomeric
Smooth / lower sheen finish, bridges
cracks and masks surface
imperfections
Resist...
49
100% acrylic texture coating
Fine texture
Minimizes surface imperfections
Provides a decorative
appearance
100% acrylic...
50
High-build, solvent-borne
acrylic coating
Smooth texture
Can be applied down to 20° F
Self-priming, bridges hairline cr...
51
Quick-drying, opaque water-
repellant for vertical, above-grade
surfaces; recoat in 15 minutes
Can be applied down to 3...
52
Easy-to-apply to asphalt,
concrete, brick and masonry
by striper, brush or roller
Minimizes bleeding
Fast dry time enab...
Product Type
• 57500 Alkyd Clear (National formula)
• 56500 Acrylic/Oil Clear (OTC formula)
• 56400 Acrylic Clear (SouthCo...
Semi-Transparent
Stains
The PPG Promise:
Because Every Job Matters
As a global coatings leader with over 100
years of unmatched coatings
expertise...
PPG Commercial Overview Presentation
PPG Commercial Overview Presentation
PPG Commercial Overview Presentation
PPG Commercial Overview Presentation
PPG Commercial Overview Presentation
Upcoming SlideShare
Loading in...5
×

PPG Commercial Overview Presentation

832

Published on

Introduction to PPG for the Commercial Specifier and End User

Published in: Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
832
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
17
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide
  • Lets take a closer look at the Olympic Exterior Stain family.
  • You might ask, “How does my customer, internal or external, going to know that PPG is changing the way we position ourselves toward service?” It is agreed, this change must be very visible, and articulated clearly at all levels of the pyramid: Support, Stores, Sales Professionals, and ultimately THE CUSTOMER. Therefore, we are asking that every employee embrace a promise we can deliver, affirming that every job matters. “At PPG, our customers are the highest priority. That means we deliver on our promises. We are proud to stand by every customer we service and every product we sell. It is a commitment we have kept with our customers for over a century. As one of the world’s leading coatings and service companies, we understand the business. That means we have the expertise to anticipate your needs and the experience to resolve any issues. We don’t have a one-size-fits-all solution, but we will find the solution that fits. Our solutions are built on a foundation of global industry leadership, unmatched research and development, and coatings expertise, and they are delivered to every customer who chooses our products.”
  • PPG Commercial Overview Presentation

    1. 1. ► A Fortune 200 Company – (#182) ► A global maker of paints, coatings, optical products, specialty materials, chemicals, glass and fiber glass ► Founded in 1883 ► Headquartered in Pittsburgh, Pa. ► Owned by approximately 197,000 shareholders, including 15,500 employees and retirees ► Now the largest coatings manufacturer in the world
    2. 2. ► Approximately 39,000 employees ► In more than 70 countries PPG Presence
    3. 3. ► Composed of 12 businesses in 5 segments: > Performance Coatings – Aerospace – Architectural Coatings – Americas & Asia Pacific – Automotive Refinish – Protective & Marine Coatings > Industrial Coatings – Automotive OEM Coatings – Industrial Coatings – Packaging Coatings > Architectural Coatings – EMEA (Europe, Middle East, Africa) > Optical & Specialty Materials – Optical Products – Silicas > Glass – Fiber Glass – Flat Glass
    4. 4. Performance Coatings: Architectural Coatings Americas & Asia/Pacific
    5. 5. Performance Coatings: Automotive Refinish
    6. 6. Industrial Coatings: Packaging Coatings
    7. 7. Performance Coatings: Protective & Marine Coatings
    8. 8. Industrial Coatings: Automotive OEM Coatings
    9. 9. Industrial Coatings: Industrial Coatings
    10. 10. Architectural Coatings - EMEA: Europe, Middle East, Africa
    11. 11. Optical & Specialty Materials: Optical Products
    12. 12. Optical & Specialty Materials: Silicas
    13. 13. Glass: Flat Glass
    14. 14. Glass: Fiber Glass
    15. 15. Commercial High Performance Coatings
    16. 16. 100% Acrylic Direct to Metal Industrial Enamel Product Type • 90-306/406 Safety Red • 90-310/410 Safety Blue • 90-311/411 Safety Green Products Recommended uses • Aluminum • Ferrous Metal • Galvanized Steel • Concrete, Masonry • Drywall, Stucco, Plaster • CMU • 90-313/413 Safety Orange • 90-330/430 Safety Yellow • 90-353/453 Black
    17. 17. • Direct to metal application • Available in Satin and Gloss • Excellent color and gloss retention • Primer/Finish available in three colors, red, white, gray • VOC – 1.5 lbs./gal. (191 g/L) Key Information • Improved color and gloss retention versus most alkyds and two component coatings • High hiding • Flash rust resistant • Easy to apply, low odor • Performance Offset to Federal Standard TT-E-2784 • Meets MPI Category #154, Interior W.B. Light Industrial Coating, Gloss, MPI Gloss Level 6 • Can earn LEED 2009 Credits Features Pitt-Tech Acrylic DTM
    18. 18. 100% Acrylic High Performance DTM Industrial Enamel Product Type • 90-1110 Satin • 90-1210 Semi-Gloss • 90-1310 Gloss Products Recommended uses • Aluminum • Ferrous Metal • Galvanized Steel • Concrete, Masonry • Drywall, Stucco, Plaster • CMU • 90-1306 Gloss Safety Red • 90-1313 Gloss Safety Orange • 90-1333 Gloss Safety Yellow • 90-1353 Gloss Black
    19. 19. • Excellent adhesion for true DTM performance • Improved color, and gloss retention versus most alkyds, water-base and two-component systems • High hiding • Flash rust resistant • Easy to apply, low odor Key Information (vs. Pitt-Tech DTM) • Performance Offset to Federal Standard TT-E-2784 and MIL-P-28578 • Meets MPI Category #153, Light Industrial Coating Interior W.B. Satin, Semi Gloss or Gloss • Meets MPI Category #163, Light Industrial Coating Interior W.B., Gloss, MPI Gloss Level 5 • Can earn LEED 2009 Credits Features Pitt-Tech Plus Acrylic DTM
    20. 20. 100% Acrylic High Performance Direct to Metal Exterior Dry Fog Product Type • 90-810 Neutral Base • 90-811 White Base • 90-812 Porcelain White Products Recommended uses • Ferrous Metal • Previously Painted Metal • Galvanized Metal • Concrete • Tanks • Towers • Canopies
    21. 21. • Direct to Metal High Performance Semi-Gloss • Exterior dry fog • Dry fog at 10-15 feet (75°/ 50% RH) • Low VOC - .71 lbs./gal. (85 g/L) Key Information • Self Priming • Excellent Dry Fall and Transfer Efficiency • Protects from the effects of corrosion and weathering • Exceptional Color and Gloss Retention • Rust Inhibitive • Easy to apply via spray, brush or roll • VOC compliant • Flash Rust Resistance Features Pitt-Tech Exterior Dry Fall
    22. 22. PPG Waterborne Epoxy
    23. 23. Two Component Waterborne Polyamide Epoxy Product Type • 98-1 Porcelain White • 98-2 Black • 98-3 Light Gray • 98-4 ASA #49 Gray • 98-98 Gloss Component B • 98-100 S/G Component B Products Recommended uses • Aluminum • Ferrous Metal • Wood • Concrete • Galvanized Steel • Drywall • Plaster • 98-9 Tile Red • 98-10 Safety Red • 98-11 Safety Blue • 98-12 Safety Orange • 98-13 Safety Yellow • 98-101 Low VOC Gloss Comp. B
    24. 24. • Waterborne Polyamide Epoxy • Gloss & Semi-Gloss Sheens • VOC - 2.2 lbs/gal. (271 g/L) • Spray, brush, roller application • Excellent floor coating for walk-ways / light traffic • Packaged Colors including Safety Colors • Pastel & Mid-tone Tint Base Key Information • Water-borne formula meets all national VOC regulations • Chemical and solvent resistance equal to solvent epoxy coatings • Superior abrasion resistance • Suitable for both floors and vertical surfaces. • Water borne formula for low odor and reduced yellowing Features
    25. 25. ANTI-SLIP SAFETY FLOORING PRODUCT LINE
    26. 26. Safety Non-Skid coatings can help improve the safety of the work environment Walkways, stairs, and generally any public access spaces need to have slip and fall protection
    27. 27. Did You Know Slips and Falls in the Workplace… • Cause 250,000 injuries & 800 fatalities each year • Cost $30,000 per incident or $1 million when a fatality results • One of the leading causes of workers’ compensation & liability claims ACCIDENT STATISTICS
    28. 28. Coefficient of Friction (COF): The ratio of the force that maintains contact between an object and a surface and the frictional force that resists the motion of the object Simply: “measurement of slip resistance” BACK TO BASICS
    29. 29. OSHA: • Requires a value of 0.5 COF in the workplace ADA (Americans with Disabilities Act): • Recommends 0.6 COF for walkways • Recommends 0.8 COF for ramps Coefficient of Friction (COF)
    30. 30. BACK TO BASICS Coefficient of Friction (COF) More Basics: • Slips happen where there is too little friction or traction between the footwear and the walking surface • Hydroplaning
    31. 31. #1 - Water COMMON CAUSES OF SLIPS AND FALLS
    32. 32. #2 - Chemical or Oil spills COMMON CAUSES OF SLIPS AND FALLS
    33. 33. #3 - Dirt and debris COMMON CAUSES OF SLIPS AND FALLS
    34. 34. Because PPG Anti-Slip Safety Coatings Were Developed to Withstand: •“Controlled crash” of 30 ton F-14 Tomcats landing at speeds over 150 mph • Contamination exposure from jet fuel, hydraulic fluids, and sea water while maintaining a 0.85 COF • Service life of 12 months in time of war WHY ON AIRCRAFT CARRIER FLIGHT DECKS?
    35. 35. PPG ANTI-SLIP TECHNOLOGY The Technology: Constant profile and aluminum oxide gives PPG safety coatings its extreme anti- slip and durability characteristics as well as being easy to apply Spilled Liquid Anti-Slip Coatings
    36. 36. Aluminum Oxide on the Moh’s Hardness Scale
    37. 37. • Single component, water-based acrylic anti-slip. • Low VOC and fast cure. • Apply to: wood, asphalt, metal and concrete. • Great for pedestrian traffic areas like: -platforms -ramps and walkways SFT 600 – PEDESTRIAN GRADE (#99-600X Series)
    38. 38. • Two component, water-based epoxy anti-slip. • Low VOC • Can be applied to dry or damp surfaces. • Suitable for barefoot traffic. • Ideal for: - locker rooms or shower areas - hospitals and laundry areas - swimming pool decks - marinas and boat decks SFT 610 – BAREFOOT/RECREATIONAL GRADE (#99-610X Series)
    39. 39. • Single component epoxy ester • Excellent chemical resistance to: - oils, gasoline, acids, and most solvents • Ideal for high pedestrian traffic and/or light vehicular areas like: - decks, ramps, and walkways - garages and loading areas including car ramps - office, stores, and school entrances • Unused product can be resealed and applied later SFT 625 –HEAVY PEDESTRIAN AND LIGHT ROLLING GRADE (#99-625X Series)
    40. 40. • Two component epoxy • Great for heavy rolling traffic and heavy impacts • Excellent chemical resistance to: - oils, gasoline, acids, and most solvents • Ideal for industrial areas like: -manufacturing, chemical or food plants including loading areas - machine shops and warehouses - stadiums and transit systems SFT 650 – HEAVY DUTY GRADE (#99-650X Series)
    41. 41. • 100% solids two component epoxy • Great where odor and solvents are a concern • Excellent chemical resistance to: - oils, gasoline, acids, and most solvents • Ideal for industrial areas like: - manufacturing and chemical processing plants - kitchens, cafeterias, and wineries - meat packing and food processing plants SFT 675 – ZERO VOC HEAVY DUTY GRADE (#99-675X Series)
    42. 42. 44 Premium Formulated for patching larger cracks, voids and openings on masonry and stucco surfaces Compatible with acrylic coatings Premium, lightweight acrylic latex block filler and surfacer Smoothes, fills and levels surfaces Can help earn LEED 2009 credits* Premium alkali-resistant primer Excellent sealing and stain- blocking performance Can help earn LEED 2009 credits* Interior/ExteriorInterior/ExteriorInterior/Exterior For more information, visit: ppgpro.com * See product TDS for more detail. Product Offering > Primers: PPG Paints
    43. 43. 45 High-build primer Resists wind-driven rain as part of a three-coat system Can help earn LEED 2009 credits* Alkali-resistant primer Minimizes white-crust salt deposits Protects and prepares the surface for topcoating Minimizes peeling and cracking ExteriorInterior/Exterior For more information, visit: ppgpro.com * See product TDS for more detail. Product Offering > Primers: PPG Paints
    44. 44. 46 Fast-drying, clear or pigmented waterborne acrylic sealer Penetrates and seals new, porous surfaces and old, dusty or chalky paint films and substrates Improves primer/topcoat bond Deep-penetrating, tintable, pigmented epoxy-ester primer Primes, seals and solidifies chalky masonry surfaces Recommended for tilt-ups; alkali- and efflorescence-resistant ExteriorInterior/Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    45. 45. 47 Clear, penetrating, non-film-forming sealer Water repellant Lengthens substrate life and reduces maintenance costs Maintains natural appearance Clear, film-forming sealer Water repellant Minimizes staining and discoloration on traffic surface Prevents peeling/cracking Interior/ExteriorInterior/Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    46. 46. 48 100% acrylic, high-build elastomeric Smooth / lower sheen finish, bridges cracks and masks surface imperfections Resists wind-driven rain with three coats at standard coverage Exterior 100% acrylic, high-build elastomeric Smooth finish, bridges cracks and masks surface imperfections Resists wind-driven rain with two coats at 6.5 mils each Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    47. 47. 49 100% acrylic texture coating Fine texture Minimizes surface imperfections Provides a decorative appearance 100% acrylic texture coating Medium texture Minimizes surface imperfections Provides a decorative appearance 100% acrylic texture coating Medium texture vermiculite Minimizes surface imperfections Provides a decorative appearance Interior/ExteriorInterior/ExteriorInterior/Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    48. 48. 50 High-build, solvent-borne acrylic coating Smooth texture Can be applied down to 20° F Self-priming, bridges hairline cracks Exterior 100% acrylic texture coating Coarse texture Minimizes surface imperfections Provides a decorative appearance Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    49. 49. 51 Quick-drying, opaque water- repellant for vertical, above-grade surfaces; recoat in 15 minutes Can be applied down to 35° F Available in 3 bases Film- forming, tintable, waterborne, acryl ic concrete stain for vertical and horizontal above-grade surfaces Water- and chemical- resistant, minimizes stains and discoloration Available in 3 bases High-build acrylic topcoat for vertical, above-grade surfaces Resists wind-driven rain with two coats at 5 mils each; provides extra protection in fewer coats Available in 2 bases Interior/ExteriorExteriorInterior/Exterior For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    50. 50. 52 Easy-to-apply to asphalt, concrete, brick and masonry by striper, brush or roller Minimizes bleeding Fast dry time enables traffic to resume quickly Latex: White, Yellow, Handicap Blue, Red Alkyd: White and Yellow Tintable White, Bright White and Neutral Base Bright whites create vivid lines Wide tinting range Water reducible Compatible with most sprayers and stripers For more information, visit: ppgpro.com Product Offering > Commercial: PPG Paints
    51. 51. Product Type • 57500 Alkyd Clear (National formula) • 56500 Acrylic/Oil Clear (OTC formula) • 56400 Acrylic Clear (SouthCoast formula) Products Color Olympic Maximum Clear • Clear Recommended uses • Outdoor Furniture • Exterior Wood Surfaces • Decks, Fences, Siding • Playsets It’s unique formula penetrates deep, enhancing the natural look of wood while it strengthens, protects, and conditions wood fibers. May be used on new wood, pressure-treated wood, weathered wood, and wood previously coated with a solvent-based clear or semi- transparent stains.
    52. 52. Semi-Transparent Stains
    53. 53. The PPG Promise: Because Every Job Matters As a global coatings leader with over 100 years of unmatched coatings expertise, research and manufacturing excellence, our customers are always our highest priority. We promise to: • Understand the needs of our customers • Find the right solution for every job • Stand behind every product • Be responsive and proudly deliver • Meet our commitments
    1. A particular slide catching your eye?

      Clipping is a handy way to collect important slides you want to go back to later.

    ×