• Like

Loading…

Flash Player 9 (or above) is needed to view presentations.
We have detected that you do not have it on your computer. To install it, go here.

Κατάλογος της Apricus.

  • 96 views
Uploaded on

Ηλιακή θέρμανση και ψύξη, δοχεία αποθήκευσης Ζεστού Νερού Χρήσης, Συλλέκτες κενού και επιλεκτικοί.

Ηλιακή θέρμανση και ψύξη, δοχεία αποθήκευσης Ζεστού Νερού Χρήσης, Συλλέκτες κενού και επιλεκτικοί.

More in: Technology
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Be the first to comment
    Be the first to like this
No Downloads

Views

Total Views
96
On Slideshare
0
From Embeds
0
Number of Embeds
0

Actions

Shares
Downloads
0
Comments
0
Likes
0

Embeds 0

No embeds

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
    No notes for slide

Transcript

  • 1. ! Product Catalogue International Edition V5 - March 2013 Delivering Sustainable Hot Water Solutions
  • 2. Ordering Information AP Solar Collector FPC Flat Plate Collector Solar Ready Hot Water Tank MFC-1 Solar Controller Solar Pump Station Expansion Tanks Brassware Insulation & Flexible Piping Line-set Insulated Piping Sales Tools Other Items ! ! ! ! ! ! ! Copyright © 2013 - Apricus Solar Co., Ltd 1 A2-07.4.1-PB-V5 (March 2013) Contents
  • 3. Purchase Orders Purchase orders should be emailed through to your assigned Apricus sales manager with the following information: • Company Name • Company Address • Product code • Quantity • Shipment method (AIR, Express Post, LCL, FCL) • Purchase terms (Incoterms 2010) • Destination Port or Address • Any special requirements Pricing Validity • Product pricing may be updated from time to time given 60 days written notice. • Freight cost quotations are only valid for 7 days unless otherwise indicated. Terms & Conditions of Sales All purchase of products shall be in accordance with the most recent version of the “Apricus Terms and Conditions of Sale for Distributors” policy which may be updated from time to time and is viewable in the Apricus Tech Centre online here (login required). Apricus Online For more information about Apricus products and services please visit www.apricus.com. Login to the Apricus Tech Centre to gain access to more detailed product overview documents, installation manuals, certificates, technical guides, solar design calculation tools and more. Questions or Feedback? Email us directly at service@apricus.com ITW Universität Stuttgart 011-7S161 R Global-Mark.com.au® Quality M anagement .I SO 9001 AS 3688 C of C: 40107 Global-Mark.com.au ! Copyright © 2013 - Apricus Solar Co., Ltd 1 A2-07.4.1-PB-V5 (March 2013) Ordering Information
  • 4. Product Range AP collectors are available in 10, 20, 22 or 30 tube sizes and have a number of options depending on the local market requirements. Model AP-10 AP-20 AP-22 AP-30 Length 2005 mm2005 mm2005 mm2005 mm Height 136 mm (not including mounting frame)136 mm (not including mounting frame)136 mm (not including mounting frame)136 mm (not including mounting frame) Width 796 mm 1496 mm 1636 mm 2196 mm Peak Output* 648 Watts 1296 Watts 1425 Watts 1944 Watts Aperture Area 0.94 m2 1.88m2 2.07m2 2.83m2 Gross Area 1.59 m2 3 m2 3.28m2 4.4 m2 Gross Dry Weight 35 kg 63.5 kg 71.3kg 95 kg Fluid Capacity 310 ml 550 ml 600ml 790 ml * Data from ITW report 09COL805. Calculated at midday (trans IAM = 1), G=1000W/m2, ∆T (tm-ta)=0 Complete Collector Package A complete collector comprises the following main components: • Manifold (insulated box that contains the copper header pipe) • Standard mounting frame (suitable for flush mounting roof) • Evacuated tubes and heat pipes • Additional standard accessories (tube clips, connection fittings etc) Depending on the installation requirements additional components may be required: • Angled frame kits (raise installation angle of the collector) • Frame attachment components Solar Collector Naming Convention Naming Format: APSE - AAAA - BB - CCC APSE AP collector with anodized aluminium silver colour & end port header pipes. AAAA COMP = complete collector including manifold, standard frame and evacuated tubes KIT = manifold and standard frame (no evacuated tubes) BB Material of the frame: SS = Stainless Steel, AL = Aluminium CCC Number of evacuated tubes: 10T, 20T, 22T or 30T e.g. APSE-COMP-SS-30T = Complete 30 tube collector with stainless steel standard frame. APSE-KIT-AL-20T = 20 tube manifold and aluminium standard frame APSE-30T = 30 tube manifold only How To Order Manifold and standard frame are ordered together as a “kit”, then pallets or boxes of evacuated tubes and heat pipes are ordered separately to make up the complete package. Your Apricus sales manager will help guide you. ! Copyright © 2013 - Apricus Solar Co., Ltd 2 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 5. KITS: Manifold & Stainless Steel Standard Frame Kits do not include roof mounting hardware, for details see page 8. Parts Included: • Manifold • Stainless Steel Standard Frame • Heat transfer paste • Tube clips • Installation instructions • Brass fittings and other accessories (if ordered) Part #: APSE-KIT-SS-30T Package Contents: • 1 x 30 Tube Manifold (#APSE-30T) • 1 x 30 Tube Standard Frame Kit (#APFR-KIT-SS-STD-30T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Rubber Sensor Plug (#RSPLUG) • 30 x Tube Clips (#FR-TC[SS-BT]) LxWxH: 2300x250x160mm NW: 18.8kg GW: 20.1kg Part #: APSE-KIT-SS-22T Package Contents: • 1 x 22 Tube Manifold (#APSE-22T) • 1 x 22 Tube Standard Frame Kit (#APFR-KIT-SS-STD-22T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 22 x Tube Clips (#FR-TC[SS-BT]) LxWxH: 2030x250x160mm NW: 16.9kg GW: 18.1kg Part #: APSE-KIT-SS-20T Package Contents: • 1 x 20 Tube Manifold (#APSE-20T) • 1 x 20 Tube Standard Frame Kit (#APFR-KIT-SS-STD-20T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 20 x Tube Clips (#FR-TC[SS-BT]) LxWxH: 2030x250x160mm NW: 13.5kg GW: 14.6kg Part #: APSE-KIT-SS-10T(#1/2) Package Contents: • 1 x 10 tube manifold (#APSE-10T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 10 x Tube Clips (#FR-TC[SS-BT]) LxWxH: 900x250x160mm NW: 3.5kg GW: 4.8kg ---------------------------------------------------------------- Part #: APFR-KIT-SS-STD-10T(#2/2) Package Contents: • 1 x 10 Tube Bottom Track (#APFR-SS-BT-10T) • 1 x 10 Tube Horizontal Brace (#APFR-SS-HB-10T) • 2 x Front Track (#APFR-SS-FT) LxWxH: 2040x230x230mm NW: 4.8kg GW: 5.2kg ! Copyright © 2013 - Apricus Solar Co., Ltd 3 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 6. KITS: Manifold & Aluminium Standard Frame Kits do not include roof mounting hardware, for details see page 8. Parts Included: • Manifold • Aluminium Standard Frame • Heat transfer paste • Tube clips • Installation instructions • Brass fittings and other accessories (if ordered) Part #: APSE-KIT-AL-30T Package Contents: • 1 x 30 Tube Manifold (#APSE-30T) • 1 x 30 Tube Standard Frame Kit (#APFR-KIT-AL-STD-30T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Rubber Sensor Plug (#RSPLUG) • 30 x Tube Clips (#FR-TC[AL-BT]) LxWxH: 2300x250x160mm NW: 17.2kg GW: 18.5kg Part #: APSE-KIT-AL-22T Package Contents: • 1 x 22 Tube Manifold (#APSE-22T) • 1 x 22 Tube Standard Frame Kit (#APFR-KIT-AL-STD-22T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 22 x Tube Clips (#FR-TC[AL-BT]) LxWxH: 2030x250x160mm NW: 15.9kg GW: 17kg Part #: APSE-KIT-AL-20T Package Contents: • 1 x 20 Tube Manifold (#APSE-20T) • 1 x 20 Tube Standard Frame Kit (#APFR-KIT-AL-STD-20T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 20 x Tube Clips (#FR-TC[AL-BT]) LxWxH: 2030x250x160mm NW: 12.5kg GW: 13.6kg Part #: APSE-KIT-AL-10T(#1/2) Package Contents: • 1 x 10 tube manifold (#APSE-10T) • 1 x Heat Transfer Paste (#HTPASTE-25G) • 1 x Sensor Plug (#RSPLUG) • 10 x Tube Clips (#FR-TC[AL-BT]) LxWxH: 900x250x160mm NW: 3.5kg GW: 4.8kg ---------------------------------------------------------------- Part #: APFR-KIT-AL-STD-10T (#2/2) Package Contents: • 1 x 10 Tube Bottom Track (#APFR-AL-BT-10T) • 1 x 10 Tube Horizontal Brace (#APFR-AL-HB-10T) • 2 x Front Track (#APFR-AL-FT) LxWxH: 2040x230x230mm NW: 4.1kg GW: 4.5kg ! Copyright © 2013 - Apricus Solar Co., Ltd 4 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 7. • Evacuated Tube • Heat pipe • Heat transfer fins • Washer and heat pipe spring • Rubber tube cap • Spring plate Evacuated Tubes & Heat Pipes Evacuated tubes and heat pipes (ET/HP) are packed in boxes of 10 or 12. Boxes can be stacked lying flat, or packed upright on a reinforced wooden pallet faster container unloading and safe road freight. Each ET/HP assembly includes: Part #: ET/HP-10/10 LxWxH: 1940x380x190mm NW: 29.5kg GW: 31kg Packing: • Cardboard box. • Individual boxes loose in container, or packed on pallets (as requested). Part #: ET/HP-12/12 LxWxH: 1940x380x260mm NW: 35kg GW: 36.3kg Packing: • Cardboard box. • Individual boxes loose in container, or packed on pallets (as requested). Part #: ET-10 Notes: Tubes do NOT include heat pipe, spring plate, washer or spring. LxWxH: 1940x380x190mm NW: 26.5kg GW: 28kg Packing: • Cardboard box. • Individual boxes loose in container, or packed on pallets (as requested). Part #: 15*ET/HP-10/10 LxWxH: 980x980x2080mm NW: 442.5kg GW: 481kg Packing: Wooden pallet with steel reinforcing. (wood certified for export) Part #: 12*ET/HP-12/12 LxWxH: 1130x1040x2080mm NW: 427.2kg GW: 458.6kg Packing: Wooden pallet with steel reinforcing. (wood certified for export) ! Copyright © 2013 - Apricus Solar Co., Ltd 5 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 8. Mounting Frame Materials The mounting frame is available in either stainless steel (SS) or high tensile grade aluminium (AL). • SS is the most cost effective choice, suitable for most climates and installation methods. • AL frame provides much greater strength for areas that have significant wind loading requirements. The anodized finish also provides superior corrosion resistance in coastal applications. Both frames options have a similar overall design so are compatible with the range of mounting accessories offered by Apricus. Mounting Frame Naming Convention Naming Format: APFR - AAA - BB - CCC - DDD - EEE APFR AP collector frame AAA KIT = Indicates an angle frame assembly. No KIT indicates a single component. BB Material of the frame: SS = Stainless Steel, AL = Aluminium CCC Frame Style: STD = Standard UF = U Foot RR = Roof Rail RF = Round Foot RT = Roof Track RS = Roof Strap DDD Angle of the frame: 10D, 30D, 45D or 30<60D (adjustable angle) EEE Number of evacuated tubes: 10T, 20T, 22T or 30T e.g. APFR-KIT-SS-UF-30D-20T = 20 tube stainless steel 30o angle frame with U feet attachment APFR-KIT-AL-RR-45D-30T = 30 tube aluminium 45o angle frame with roof rail attachment The table below provides the standard components quantities for each style of frame kit. Kit Name (Code) Component (product code) AP-10 AP-20 AP-22 AP-30 SS Standard Frame (#APFR-KIT-SS-STD-__T)* Front Track (#FR-SS-FT) 2 2 3 3 SS Standard Frame (#APFR-KIT-SS-STD-__T)* Bottom Track (#FR-SS-BT-__T) 1 1 1 1SS Standard Frame (#APFR-KIT-SS-STD-__T)* Horizontal Brace (#FR-SS-HB-__T) 2 2 2 2 SS Standard Frame (#APFR-KIT-SS-STD-__T)* Tube Clips (#FR-SS-TC[SS-BT] 10 20 22 30 AL Standard Frame (#APFR-KIT-AL-STD-__T) Front Track (#FR-AL-FT) 2 2* 3* 3* AL Standard Frame (#APFR-KIT-AL-STD-__T) Bottom Track (#FR-AL-BT-__T) 1 1 1 1 AL Standard Frame (#APFR-KIT-AL-STD-__T) Tube Clips (#FR-SS-TC[AL-BT] 10 20 22 30 SS 10o Angle Frame Kit (#APFR-KIT-SS-__-10D-__T) 10o Rear Leg (#FR-SS-RL-10D) 2 2 3 3SS 10o Angle Frame Kit (#APFR-KIT-SS-__-10D-__T) 10o X Brace (#FR-SS-XB-10D-__T) 1 1 1 1 SS 30o Angle Frame Kit (#APFR-KIT-SS-__-30D-__T) 30o Rear Leg (#FR-SS-RL-30D) 2 2 3 3SS 30o Angle Frame Kit (#APFR-KIT-SS-__-30D-__T) X Brace (#FR-SS-XB-__T) 1 1 1 1 SS 30-60o Angle Frame Kit (#APFR-KIT-SS-__-30<60D-__T) 30-60o Rear Legs (#FR-SS-RL-30<60D) 2 2 3* 3SS 30-60o Angle Frame Kit (#APFR-KIT-SS-__-30<60D-__T) X Brace (#FR-SS-XB-__T) 1 1 1 1 AL 30o Angle Frame Kit (#APFR-KIT-AL-__-30D-__T) 30o Rear Leg (#FR-AL-RL-30D) 2 2* 3* 3*AL 30o Angle Frame Kit (#APFR-KIT-AL-__-30D-__T) X Brace (FR-AL-XB-__T) 1 1 1 1 AL 45o Angle Frame Kit (#APFR-KIT-AL-__-45D-__T) 45o Rear Leg (#FR-AL-RL-45D) 2 2* 3* 3*AL 45o Angle Frame Kit (#APFR-KIT-AL-__-45D-__T) X Brace (FR-AL-XB-__T) 1 1 1 1 Attachment Option Components Quantities U Foot, Round Foot or Roof Strap 4 4 6 6 Attachment Option Components Quantities Roof Rail 2 2 2 2 Attachment Option Components Quantities Roof Track 2 2 3 3 * For high wind load regions the use of the AL frame is recommended and additional front tracks and rear legs may be purchased to increase the frame strength. AP-20 increase from 2 to 3 front track/rear legs; AP-22/30 increase from 3 to 5 front track/rear legs. ! Copyright © 2013 - Apricus Solar Co., Ltd 6 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 9. ! Copyright © 2013 - Apricus Solar Co., Ltd 7 A2-07.4.1-PB-V5 (March 2013) Round Foot (#FR-SS-RF) attachment option Roof Rail (#FR-SS-RR) attachment option Roof Track (#FR-SS-RT) attachment option U Foot (#FR-SS-UF) attachment option X Brace (#FR-SS-XB-30T) Rear Leg (#FR-SS-RL-__) (10D, 30D or 30<60D) SS Angle Frame (30 tube) SS Standard Frame (30 tube) Bottom Track (#FR-SS-BT-30T) Front Track (#FR-SS-FT) Tube Clips (#FR-SS-TC[SS-BT]) Roof Rail (#FR-SS-RR) attachment option Round Foot (#FR-SS-RF) attachment option Rubber Pad (#FR-SRPAD or FR-TRPAD) attachment option U Foot (#FR-SS-UF) attachment option Horizontal Brace (#FR-SS-HB) Roof Strap (#FR-SS-ST-__) attachment option AP Evacuated Tube Solar Collector
  • 10. ! Copyright © 2013 - Apricus Solar Co., Ltd 8 A2-07.4.1-PB-V5 (March 2013) AL Standard Frame (30 tube) Bottom Track (#FR-AL-BT-30T) Front Track (#FR-AL-FT) Roof Rail (#FR-AL-RR) attachment option U Foot (#FR-SS-UF) attachment option Tube Clips (#FR-SS-TC[AL-BT]) Rubber Pad (#FR-SRPAD or FR-TRPAD) attachment option Roof Strap (#FR-SS-ST-__) attachment option AL Angle Frame (30 tube) Roof Rail (#FR-AL-RR) attachment option U Foot (#FR-SS-UF) attachment option X Brace (#FR-AL-XB-30T) Rear Leg (#FR-AL-RL-__) (30D or 45D) AP Evacuated Tube Solar Collector
  • 11. Mounting Frame Components Name: SS Roof Rail Part #: FR-SS-RR-XX (XX = 10T, 20T or 30T) Notes: • Stainless steel horizontal roof rail complete with U Feet for use with stainless steel standard frame or angled frame kits. • Ideal when roof attachment points do not align with standard frame spacing. Packing: • Pre-assembled. • Loose packed in cardboard box, or as requested in order. • Can be ordered as standard part in angled frame kits. Name: AL Roof Rail Part #: FR-AL-RR-XX (XX = 10T, 20T or 30T) Notes: • Aluminium horizontal roof rail complete with L Brackets for use with aluminium standard frame or angled frame kits. • Ideal when roof attachment points do not align with standard frame spacing. Packing: Pre-assembled. Loose packed in cardboard box, or as requested in order. Can be ordered as standard part in angled frame kits. Name: Tube Clips Part #: a) FR-SS-TC[SS-BT] (For Stainless Steel frames) b) FR-SS-TC[AL-BT] (For Aluminium frames) Notes: • Clip that holds Tubes in place. • Supplied with Standard Frames. Packing: Packed loose in box depending on order quantity. a b Name: Tube Rubber Cap Part #: FR-TRCAP Notes: • Protective rubber cap on end of ETs. • Supplied standard with all boxes of Evacuated Tubes. Packing: Packed loose in box depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 9 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 12. Mounting Frame Components Name: AL Front Track Part #: FR-AL-FT Notes: • Included in standard frame. • Additional Front Tracks can be added to increase frame strength for high wind regions. AP-10 +1, AP-20 +1, AP-22 +0, AP-30 +2 Packing: • Pre-assembled. • Loose packed in cardboard box, or as requested in order. Name: AL Rear Leg (30 or 45o) Part #: FR-AL-RL-XX (XX = 30D or 45D) Notes: • Rear leg for aluminium angled frame kits, supplied with attachment plate and fasteners. • Additional Rear Legs can be added to increase frame strength for high wind regions. AP-10 +1, AP-20 +1, AP-22 +0, AP-30 +2 Packing: • Pre-assembled. • Loose packed in cardboard box, or as requested in order. Name: L Brackets (set of 2 or 4 pairs) Part #: FR-AL-LB-x2 or x4 Notes: • Set of 2 or 4 pairs of L Brackets for use when adding Front Tracks or Rear Legs to frame kits for high wind regions. • 2 pairs suitable for 20T frame to allow increase from 2 to 3 Tracks/Legs • 4 pairs suitable for 30T frame to allow increase from 3 to 5 Tracks/Legs N/G W: FR-AL-LB-x2 = 0.5kg FR-AL-LB-x4 = 1kg Packing: • Packed in plastic bag. • Bulk quantity packed in box depending on order quantity. Name: Roof Track Part #: FR-SS-RT Notes: Provides the same flush mounting method as the front track for stainless steel angled frames. Packing: • Pre-assembled. • Multiple packed in box depending on order quantity. • Can be ordered as part of angled frame kits. ! Copyright © 2013 - Apricus Solar Co., Ltd 10 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 13. Accessories Name: Heat Transfer Paste Part #: HTPASTE-25GM Notes: • Silicone oil zinc powder heat transfer paste for use on heat pipe tips. Packing: Packed loose in box depending on order quantity. Name: Heat Transfer Paste Part #: HTPASTE-2KG Notes: • Silicone oil zinc powder heat transfer paste for use on heat pipe tips. Net Weight: 2kg Packing: Packed loose in box depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 11 A2-07.4.1-PB-V5 (March 2013) AP Evacuated Tube Solar Collector
  • 14. Product Features FPC collector is a high efficiency, extra lightweight flat plate collector for use in residential and commercial solar thermal projects. • High efficiency Tinox energy AL solar absorber • Ultra lightweight melamine foam insulation • Low profile only 70mm / 2.75” tall • High tensile grade 6063-T5 black anodized aluminium collector sides • High transparency toughened solar glass • Harp style riser arrangement compatible with direct, closed and drain-back systems. • Suitable for portrait or landscape orientation Product Specifications Specification Model: FPC-A32 Length 2444 mm / 96” Width 1223 mm / 48” Height 75 mm / 3” Peak Output* 2097 W / 7,154 Btuh * Conversion Factor ƞ0 0.749 Heat Transfer Coefficient a1 2.770 W/(m2K) Heat Transfer Coefficient a2 0.023 W/(m2K2) Aperture Area 2.8 m2 / 30.14 ft2 Gross Area 2.98 m2 / 32 ft2 Gross Dry Weight 46 kg / 101.4 lbs Fluid Capacity 1.8 L / 0.47 US gallon Max Operation Pressure 8 bar / 116 psi Absorber Sheet 0.4 mm / 0.016” Aluminium Tinox Energy Insulation Melamine Foam Glass Cover 3.2 mm / 0.125” Hardened Glass Seals HTV Silicone Rubber Back Sheet 0.8 mm / 0.03” 5052 Aluminium Collector Sides 6063-T5 Anodized Aluminium * Data from TUV report 154010288. Calculated at midday (trans IAM = 1), G=1000W/m2, ∆T (tm-ta)=0 ! Copyright © 2013 - Apricus Solar Co., Ltd 12 A2-07.4.1-PB-V5 (March 2013) FPC Flat Plate Solar Collector
  • 15. Landscape Orientation Frame Components FR-AL-FT-A32L FR-AL-RL-A32L-YY FR-AL-TF (attachment option) Portrait Orientation Frame Components FR-AL-FT-A32P FR-AL-RL-A32P-YY FR-AL-XB-A32P FR-AL-TF (attachment option) ! Copyright © 2013 - Apricus Solar Co., Ltd 13 A2-07.4.1-PB-V5 (March 2013) FPC Flat Plate Solar Collector
  • 16. Mounting Frame Components Name: Front Track Part #: FR-AL-FT-XXXX XXXX = Collector model and Orientation. A32P = FPC-A32 Portrait; A32L = FPC-A32 Landscape Notes: Aluminium front track complete with attachment plates. Standard arrangement is 2 per FPC collector, but a 3rd front track may be required for high wind regions. Name: Rear Leg Part #: FR-AL-RL-XXXX-YY XXXX = Collector model and Orientation. A32P = FPC-A32 Portrait; A32L = FPC-A32 Landscape YY = Angle Range: 30<45D or 45<60D Notes: Rear leg supplied with attachment plate and fasteners as shown below. Name: Triangle Foot Part #: FR-AL-TF Notes: Universal mounting foot compatible with front track and rear legs. Comes with FR-BOLT-M8x50-SW-SPW Name: X Brace Part #: FR-AL-XB-A32P Notes: X Brace attached to rear legs of Portrait angled frame to provide frame rigidity. ! Copyright © 2013 - Apricus Solar Co., Ltd 14 A2-07.4.1-PB-V5 (March 2013) FPC Flat Plate Solar Collector
  • 17. Compatible with AP and FPC Collectors Name: XL Roof Rail Part #: FR-AL-XLRR Notes: • Aluminium heavy duty horizontal roof rail with both top and side slide channels for U foot (FR-SS-UF) attachment. • Ideal for commercial projects where multiple collector are installed in series. • Use FR-SS-XLRR-CON to connect rails end to end. LxWxH: 2440x43x32mm N/G Weight: 3.2kg Packing: • Thick paper wrap. • Packing based on order quantity. Name: XL Roof Rail Connector Part #: FR-SS-XLRR-CON Notes: • Connects XL Roof Rails end to end. Comes with 4 x FR-BOLT-M8x20-SPW-NL fasteners. • Use FR-SS-XLRR-CON to connect rails end to end. Packing: • Pre-assembled. • 1 piece per plastic bag or bulk quantity loose in box depending on order quantity. Name: Roof Strap Part #: FR-SS-RS-XX (XX = 60 or 100 indicating the length in cm) Notes: • Suitable for used on flush mounting of standard frame on tiled roofs. • Not suitable for high wind regions. Packing: • Pre-assembled. • Multiple packed in box depending on order quantity. Name: U Foot (with 3 fastener options) Part #: a) FR-SS-UF[M8x50] b) FR-SS-UF[M8x50&M8x20] c) FR-SS-UF[2xM8x20] Notes: • Can be used in many attachment formats as shown in the diagram. • Compatible with SS or AL frames. • Diagram shows examples of how the 3 U Foot options are used. All fasteners shown are included. Rails and tracks are not included. Packing: • Pre-assembled. • Packed loose in box depending on order quantity. • Can be ordered as part of angled frame kits. a b c ! Copyright © 2013 - Apricus Solar Co., Ltd 15 A2-07.4.1-PB-V5 (March 2013) Collector Mounting Components
  • 18. Compatible with AP and FPC Collectors Name: Round Foot Part #: FR-SS-RF[M8x50] Notes: • Large surface area with two holes for roof attachment. • Requires matching spacing of roof attachment points. • Comes with M8x50 Bolt for attachment to frame Tracks or Rails. Packing: • Pre-assembled. • Packed loose in box depending on order quantity. • Can be ordered as part of angled frame kits. Name: Round Foot Cover Part #: FR-RFC Notes: Used under Round Foot to protect roof from direct metal contact. Packing: Packed loose in box or assembled on Round Foot, as per order. Name: Roof Strap Part #: FR-SS-RS-XX (XX = 60 or 100 indicating the length in cm) Notes: • Suitable for used on flush mounting of standard frame on tiled roofs. • Not suitable for high wind regions. Packing: • Pre-assembled. • Multiple packed in box depending on order quantity. Name: M8x20 Nut Lock Assembly Part #: FR-BOLT-M8x20-SPW-NL Notes: • Assembly including M8x20 Bolt, M8 Nut, Spring Washer & Nut Lock • Used for attachment of various components Packing: • Pre-assembled. • Multiple packed in box or plastic bag depending on order quantity. Name: Standard Rubber Pad Part #: FR-SRPAD Notes: Provides the same flush mounting method as the front track for stainless steel angled frames. Packing: • Packed loose in box depending on order quantity. • Can be included in manifold box as standard component if requested. Name: Thick Rubber Pad Part #: FR-TRPAD Notes: High density silicone thick rubber pad with arrow head designed for use on asphalt shingle roofs to protect roof from the metal components. Packing: • Packed loose in box depending on order quantity. • Can be included in manifold box as standard component if requested. ! Copyright © 2013 - Apricus Solar Co., Ltd 16 A2-07.4.1-PB-V5 (March 2013) Collector Mounting Components
  • 19. Product Overview Apricus Solar Ready Tanks are specifically designed to work with thermal solar collectors in direct flow or closed loop configuration. With the option of a “mid” electrical element the tanks can also operate as stand alone electric water heaters. • High quality tank meets stringent Australian Standards • Enamel lining combined with large sized magnesium anode • 250, 315 and 400L hot water delivery models • 3.6kW heating element available in bottom or mid tank position • Durable casing suitable for outdoor use • Extremely low heat loss values • Dedicated solar flow and return ports • Dedicated temperature sensor ports • Supplied standard with PTRV (pressure and temp relief valve) • Can be used as a solar only tank for gas post boosted systems • Can be provided with coil heat exchanger for closed loop solar system Product Naming Convention SRT-GL __ -___ e.g. SRT-GLEM-250, SRT-GL-315, SRT-GLEB-400 Hot Water Delivery Capacity (L): 250, 315 or 400 Element Position: EM = Element Middle, EB = Element Bottom Packing Information Parts Included: • Solar Ready Tank • 850kPa Pressure & Temperature Relief Valve Packing: Individually packed in cardboard box. ! Copyright © 2013 - Apricus Solar Co., Ltd 17 A2-07.4.1-PB-V5 (March 2013) PTRVHW Outlet Top Sensor Solar Return Solar Flow Cold Inlet Bottom Sensor AS 3688 C of C: 40050 Global-Mark.com.au SIMPLE CONVERSION TO SOLAR Solar Ready Hot Water Tank
  • 20. Tank Specifications Solar ready tanks are available in 250, 315 & 400L hot water delivery capacities with option of no heating element, or mid or bottom positioned heating element. Flow & return ports and sensor locations are optimized for solar efficiency and hot water delivery. Specification ModelsModelsModelsModelsModelsModelsModelsModels Specification 250L 250L BOT 250L MID 315L 315L BOT 315L MID 400L 400L BOT 400L MID Tank Diameter (mm) 648 648 648 648 648 648 731 731 731 Tank Height (mm) 1405 1405 1405 1710 1710 1710 1730 1730 1730 Net Weight (kg) 84 86 86 97 98 98 129 130 130 Box Height (mm) 1450 1450 1450 1740 1740 1740 1755 1755 1755 Box Width/Depth (mm) 695 695 695 695 695 695 775 775 Gross Weight (kg) 91 93 93 111 112 112 149 150 150 Port heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground levelPort heights from ground level Hot Water Outlet (mm) 1167 1167 1167 1470 1470 1470 1464 1464 1464 PRTV Outlet (mm) 1167 1167 1167 1470 1470 1470 1474 1474 1474 Top Sensor (mm) 953 759 759 1096 791 841 1207 841 841 Solar Return Port (mm) 740 564 432 822 564 509 950 564 564 Bottom Sensor (mm) 457 369 303 448 369 342 562 369 369 Solar Flow Port (mm) 174 174 174 174 174 174 174 174 174 Cold Water Inlet (mm) 74 74 74 74 74 74 174 74 74 Hot Water Delivery (L) 1 250 250 250 315 315 315 400 400 400 Actual Volume (L) 270 270 270 340 340 340 450 450 450 Rated Pressure (Mpa) 2 0.80.80.80.80.80.80.80.80.8 Heating Element n/a 3600 Watts3600 Watts n/a 3600 Watts3600 Watts n/a 3600 Watts3600 Watts Tank Material Mild SteelMild SteelMild SteelMild SteelMild SteelMild SteelMild SteelMild SteelMild Steel Steel Thickness (mm) 2.52.52.5 3.03.03.03.03.03.0 Tank Lining Vitreous EnamelVitreous EnamelVitreous EnamelVitreous EnamelVitreous EnamelVitreous EnamelVitreous EnamelVitreous EnamelVitreous Enamel Tank Casing Power Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised SteelPower Coated Zinc Galvanised Steel Tank Ports ¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread¾” (DN20) BSP Female Thread Insulation PolyurethanePolyurethanePolyurethanePolyurethanePolyurethanePolyurethanePolyurethanePolyurethanePolyurethane Heat Loss (kWh/day) 3 2.022.022.02 2.632.632.63 2.982.982.98 1. In accordance with AS/NZ4692.1 App D. 2. Supplied with 0.8MPa PRTV (pressure and temperature relief valve). 3. Over 24hours @ 75oC ! Copyright © 2013 - Apricus Solar Co., Ltd 18 A2-07.4.1-PB-V5 (March 2013) Solar Ready Hot Water Tank
  • 21. Product Overview The Apricus MFC-1 multi-function controller can manage a wide range of solar thermal and HVAC systems for both domestic and commercial applications. A variety of software packs allow the controller to be programmed to meet a wide range of applications. Key Features • Backlit LCD display with clear plain text • Direct display of key system data (temperatures, energy, relay activity) • PT1000 temperature sensors • Calibration feature for long extension of sensor cables • Variable speed and standard relay outputs • Up to 4 dry contact signal inputs • Data-logging (SD card) • Rear and bottom punch-outs for conduit or cable glands • Quick hang wall mounting bracket • Software packs to suit various applications • Manual, Auto or Off mode for easy relay management • End User mode limits access to only basic functions Specifications Housing ABS Plastic Dimensions 199 x 100 x 54mm; 7.83” x 3.93” x 2.12” Ambient Temperature 0oC~40oC / 32oF~104oF Power Supply AC 110-240V 50/60Hz (Max 8 Amp) Standby Power Consumption 4 W Inputs 1 x PT1000 sensor (-40oC~220oC / -40oF~428oF)* 4 x PT1000 sensor (-20oC~105oC / -4oF~221oF) 3 x dry contact signal inputs 1 x Grundfos VFS flow & temp sensor input Outputs 1 x 4 Amp variable speed semiconductor relay 3 x 5 Amp standard relay Expansion RS232 plug (for future expansion hardware) Data Logging SD card (4BG provided as standard) Protection Class I Protection Type IP 20 Certifications ETL: UL 873, CSA C22.2 No. 23-93 CE: EMC 2004/108/EC, LVD 2006/95/EC * High temp sensor reading accuracy up to 220oC but can withstand 240oC / 464oF. ! Copyright © 2013 - Apricus Solar Co., Ltd 19 A2-07.4.1-PB-V5 (March 2013) Solar Controller
  • 22. Name: MFC-1 Model Solar Controller Part #: MFC-1 Package Contents: • 1 x MFC-1 Controller • 1 x Mounting Bracket • 7 x Screws • 3 x Plastic Wall Plugs • 2 x Wire clamps Dimensions (LxWxH): 245x155x125mm Net Weight: 0.46kg Gross Weight: 0.64kg Packing: Single cardboard Box Name: MFC-1 Model Solar Controller 3 Sensor Kit Part #: MFC-1-KIT[3S&SD] Package Contents: • 1 x MFC-1 Controller • 1 x Mounting Bracket • 7 x Screws • 3 x Plastic Wall Plugs • 2 x Wire Clamps • 1 x 4GB SD Card • 2 x PT-1000-1.5M-LOW • 1 x PT1000-1.5M-HIGH Dimensions (LxWxH): 245x155x125mm Net Weight: 0.65kg Gross Weight: 0.83kg Packing: Single cardboard Box Name: MFC-1 Model Solar Controller 5 Sensor Kit Part #: MFC-1-KIT[5S&SD] Package Contents: • 1 x MFC-1 Controller • 1 x Mounting Bracket • 7 x Screws • 3 x Plastic Wall Plugs • 2 x Wire clamps • 1 x 4GB SD Card • 4 x PT1000-1.5M-LOW • 1 x PT-1000-1.5M-HIGH Dimensions (LxWxH): 245x155x125mm Net Weight: 0.7kg Gross Weight: 0.875kg Packing: Single cardboard Box Name: 1.5m long low temperature PT1000 sensor (max 105oC) Part #: PT1000-1.5M-LOW Notes: • Compatible with MFC-1 Controller. Packing: Packed loose in box depending on order quantity. Name: 1.5m long high temperature PT1000 sensor (max 220oC) Part #: PT1000-1.5M-HIGH Notes: • Compatible with MFC-1 Controller. Packing: Packed loose in box depending on order quantity. Note: Power cable not supplied due to wide variety of international standards. For bulk orders power cables can be supplied upon request. ! Copyright © 2013 - Apricus Solar Co., Ltd 20 A2-07.4.1-PB-V5 (March 2013) Solar Controller
  • 23. Product Overview Apricus pump station kits provide a compact, reliable solution for domestic closed loop solar hot water systems. Four models are available ranging a single line basic model to complete twin line full featured kit. Features All pump station models feature: • Grundfos 3 speed solar pump • Flow gauge & setter • Integrated check valve • Factory pressure tested • EPP foam insulation casing ! Copyright © 2013 - Apricus Solar Co., Ltd 21 A2-07.4.1-PB-V5 (March 2013) Solar Pump Station Grundfos Pump Performance Flow Q (m 3 /h) HeadH(m) 0 1 2 3 4 5 6 7 0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 SOLAR 25-65 Performance H (Q) Solar Collector
  • 24. Name: Single Line Pump Station Part #: PSA-SL-01 Notes: • Grundfos or Wilo 3 Speed Pump • Temperature Gauge • Flow Gauge & Setter • EPP foam casing Dimensions (LxWxH): 430x350x170mm Net Weight: 3.7kg Gross Weight: 4.7kg Packing: Single cardboard Box Name: Single Line Pump Station Part #: PSA-SL-02 Notes: • Grundfos or Wilo 3 Speed Pump • Temperature Gauge • Pressure Relief Valve & connection for Expansion Tank • Flow Gauge & Setter with Fill & Drain connections • EPP Foam Casing Dimensions (LxWxH): 430x350x170mm Net Weight: 4.2kg Gross Weight: 5.2kg Packing: Single cardboard Box Name: Twin Line Pump Station Part #: PSA-TL-01 Notes: • Grundfos or Wilo 3 Speed Pump • Flow & Return Temperature Gauges • Pressure Relief Valve & connection for Expansion Tank • Flow Gauge & Setter with Fill & Drain connections • EPP foam casing Dimensions (LxWxH): 430x350x170mm Net Weight: 5kg Gross Weight: 6kg Packing: Single cardboard Box Name: Twin Line Pump Station Part #: PSA-TL-02 Notes: • Grundfos or Wilo 3 Speed Pump • Flow & Return Temperature Gauges • Pressure Relief Valve & connection for Expansion Tank • Flow Gauge & Setter with Fill & Drain connections • Air Separator with Manual Vent • EPP foam casing Dimensions (LxWxH): 430x350x170mm Net Weight: 5.4kg Gross Weight: 6.4kg Packing: Single cardboard Box ! Copyright © 2013 - Apricus Solar Co., Ltd 22 A2-07.4.1-PB-V5 (March 2013) Solar Pump Station
  • 25. Product Overview Expansion tanks are required in any closed loop hydronic system to accept the increased water volume when the water heats up. For solar hot water systems the expansion tank must be designed to withstand suitable temperatures. Apricus offers high quality expansion tanks in both a 99oC rated hot water model and 130oC rated solar model. Hot Water Expansion Tank • High grade butyl diaphragm • Leak free o-ring sealed air valve cap • Two part polyurethane, epoxy primed paint finish • Comprehensive testing • 90oC max temperature • 6 bar max pressure • Pre-charge: 8-24L = 0.7 bar; 32 = 1 bar; 60-150L = 1.5 bar Solar Expansion Tank (recommended) • High temperature butyl diaphragm • High expansion volume factor • Leak free o-ring sealed air valve cap • Patented stainless steel connection • Two part polyurethane, epoxy primed paint finish • 130oC max temperature • 10 bar max pressure • 1.9 bar pre-charge Product Selection Name: Expansion Tanks Part #: EXPT- AA - BB • AA = Tank Type; • HW = Hot water model • SW = Solar model • BB = Tank capacity in L; 8, 12, 18, 24, 35, 60, 80, 100, 150 Notes: • Lead time of 2 weeks for stock Packing: Packed loose in cardboard boxed depending on order quantity. Name: Auto-closing valve for top of expansions tank (3/4” only) Part #: EXPT-VALVE-3/4” Notes: • Lead time of 2 weeks for stock Packing: Packed loose in cardboard boxed depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 23 A2-07.4.1-PB-V5 (March 2013) Expansion Tanks
  • 26. Name: Brass Flared Nut (DRZ brass) Part #: BF-NUT-FL19 Notes: • Nut provided on copper header pipes to make “flared union” style header ports. Flaring and nut assembly completed in factory. • Must be ordered as separate item to solar collector manifold Name: Brass Flared Union Straight Connector (DRZ brass) Part #: BF-ST-FL19xFL19 Notes: • Non-flexible straight connector for joining two collectors together. • Only compatible with “flared union” style header ports. Packing: Packed loose in box depending on order quantity. Name: Brass Flared Union Elbow Connector (DRZ brass) Part #: BF-L-FL19x1/2”MBSP Notes: • Elbow connector providing ½” Male BSP thread. • Only compatible with “flared union” style header ports. Packing: Packed loose in box depending on order quantity. Name: Brass Flared Union Straight Connector (DRZ brass) Part #: BF-ST-FL19x3/4”MBSP Notes: • Straight connector providing 3/4” Male BSP thread. • Only compatible with “flared union” style header ports. Packing: Packed loose in box depending on order quantity. Name: Brass 22mm Compression Straight Connector Part #: BF-ST-CO22xCO22 Notes: • Straight compression connector x ¾” Male BSP thread • Only compatible with smooth 22mm OD copper header ports. Packing: Packed loose in box depending on order quantity. Name: Brass 22mm Compression Straight Connector Part #: BF-ST-CO22x AA MBSP • AA = Thread size: 1/2”, 3/4” Notes: • Straight olive compression connector x Male BSP thread • Only compatible with smooth 22mm OD copper header ports. Packing: Packed loose in box depending on order quantity. Name: Brass 22mm Compression Elbow Connector Part #: BF-L-CO22x AA MBSP • AA = Thread size: 1/2”, 3/4” Notes: • Elbow olive compression connector x ¾” Male BSP thread • Only compatible with smooth 22mm OD copper header ports. Packing: Packed loose in box depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 24 A2-07.4.1-PB-V5 (March 2013) Brassware
  • 27. Name: Brass Male Threaded Nipple Part #: BF-ST- AA MBSP x AA MBSP • AA = Thread size: 1/2”, 3/4” or 1” Notes: • Straight connector with Male BSP thread both ends. • Compatible with Lineset & Flexible Pipe unions. Packing: Packed loose in box depending on order quantity. Name: Solar Conversion Valve Part #: BF-SCV-BSP Notes: • Allows conversion of drain port on standard hot water storage tank into solar flow and return port. Packing: Packed loose in box depending on order quantity. Name: 2-8L/min Flow Setter Part #: BF-FLSET-2-8L-3/4"FBSPx3/4"FBSP Notes: • Float style flow gauge and restrictor valve Packing: Packed loose in box depending on order quantity. Name: Pump Union Connector Part #: BF-ST-¾”MBSPx1”FBSP-UNION Notes: • For use with G1” threaded circulation pumps • Provides ¾” MBSP thread. • Supplied with 1” Klinger fibre washer (potable water suitable) Packing: Packed in plastic bag or box as per order request. ! Copyright © 2013 - Apricus Solar Co., Ltd 25 A2-07.4.1-PB-V5 (March 2013) Brassware
  • 28. Name: Aeroflex EPDM Insulation pipe Part #: INP-EPDM- AA ID x BB • AA = Internal Diameter in mm; BB = Wall Thickness in mm Notes: • Available Sizes: 19IDx13, 19IDx20, 22IDx20, 28IDx20 • 2m lengths • Lead time of 2 weeks for stock Packing: Packed in bundles of 10 and wrapped in plastic sheet. Name: Aeroflex EPDM Insulation pipe with AL foil wrap Part #: INP-EPDM-AL - BB ID x CC • BB = Internal Diameter in mm • CC = Wall Thickness in mm Notes: • Available Sizes: 19IDx20, 22IDx20, 28IDx20, 2m lengths • Lead time of 2 weeks for stock Packing: Packed in bundles of 10 and wrapped in plastic sheet or packed in boxes of 10. Name: Flexible 304SS Pipe Part #: FLEX-304 AAAA x BBB • AAAA = Pipe ID and OD in mm; 1216 or 1620 • BBB = Length in mm; 250, 500 or 1500 Notes: • Provided with 2 x fibre washers Packing: Packed loose in cardboard box depending on order quantity. Name: Fibre Aluminium Foil tape Part #: ALFIBFOIL-5CMx50M Notes: • Fibre reinforced aluminium foil with adhesive backing. Packing: Packed loose in cardboard box depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 26 A2-07.4.1-PB-V5 (March 2013) Insulation & Flexible Piping
  • 29. Name: Insulated Lineset Piping Part #: LINESET- AAA - BBB CCCC -EPDM20-PE • AAA = Line style; • SL = Single Line • TL = Twin Line • Add S on end for sensor cable. eg. SLS, TLS • BBB = Grade of SS for flexible pipe: 304 or 316 • CCCC = Pipe ID and OD in mm: 1216, 1620 or 2025 Notes: • Aeroflex EPDM closed cell insulation, max 150oC • UV stabilised polyethylene (PE) wrap • Lead time of 2 weeks for stock • Quality silicone sensor cable (SLS or TLS option selected) Packing: Packed in 10, 15, 20 or 25m rolls in cardboard box (as requested). Name: SS Flexible Pipe Compression Tool Part #: TOOL-LINESET- AAAA • AAAA = SS pipe ID and OD in mm: 1216, 1620 or 2025 Notes: • Lead time of 2 weeks for stock Packing: Packed loose in cardboard boxed depending on order quantity. Name: SS Flexible Pipe Cutting Tool Part #: SSPIPE-CUT Notes: • Suitable for pipe up to 25mm in outside diameter Packing: Packed loose in cardboard boxed depending on order quantity. Name: Flexible SS Lineset Brass Union, Ring & Washer Set Part #: BF-LINE-UNION- AAAA x BB CCCC • AAAA = SS flexible pipe size: 1216, 1620 or 2025 • BB = Thread size: 1/2”, 3/4” or 1” Notes: • Includes split ring and high temperature fibre washer Packing: Packed in plastic bag or box as per order request. ! Copyright © 2013 - Apricus Solar Co., Ltd 27 A2-07.4.1-PB-V5 (March 2013) Line-set Insulated Piping
  • 30. Name: APSE Demo Collector Part #: APSE-DEMO-SS Package Contents: • 1 x APSE-4T Manifold • 1 x Angled Frame with Round Feet & Rubber Covers • 4 x ET-DEMO • 1 x ET-DEMO-C • 5 x HP-DEMO Dimensions (LxWxH): 770x460x300mm Net Weight: 12.3kg Gross Weight: 13kg Packing: Cardboard box Name: Demo Tube Box Part #: ET/HP-DEMO-BOX Package Contents: • 1 x Plastic Carry Case • 1 x ET-DEMO • 1 x HP-DEMO Dimensions (LxWxH): 560x160x100mm Net Weight: 2kg Packing: Multiple in cardboard box depending on order quantity. ! Copyright © 2013 - Apricus Solar Co., Ltd 28 A2-07.4.1-PB-V5 (March 2013) Sales Tools
  • 31. Name: HD-25 Heat Dissipator Part #: HD-25 Notes: • Heat dissipation unit for solar thermal systems. Dimensions (LxWxH): 570x460x270mm Net Weight: 7.5kg Gross Weight: 8kg Packing: Cardboard Box ! Copyright © 2013 - Apricus Solar Co., Ltd 29 A2-07.4.1-PB-V5 (March 2013) Other Items