Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1 1 suppliers, manufacturers
Upcoming SlideShare
Loading in...5
×
 

Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1 1 suppliers, manufacturers

on

  • 290 views

Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1:1 Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to ...

Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1:1 Input power from 0.1 Kw to 335 Kw. Transmission torque from 10 Nm to 5713 Nm. 1:1 ratio, 1.5:1, 2:1, 2.5:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:2.5, 1:3, 1:4, 1:5 gear increasing ratio. Input and output speed from 10 rpm to 1500 rpm, custom higher speed 2000 rpm, 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 15 mm to 85 mm. 42 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features. Application in printing press, rollforming machines, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane, agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage conveyor etc.

Statistics

Views

Total Views
290
Views on SlideShare
290
Embed Views
0

Actions

Likes
0
Downloads
2
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1 1 suppliers, manufacturers Right angle bevel gearbox,micro bevel gear box,spiral bevel gear reducer,gearbox 90 degree aluminium, 4 way bevel gearbox ratio 1 1 suppliers, manufacturers Document Transcript

  • JT Series Miter Gearbox Jacton Electromechanical Co.,Ltd 1 http://www.screw-jack.com
  • Contents General information ---------------------------------------------------------------------------- 3 Configurations ----------------------------------------------------------------------------------- 4 X-Shaft & Y-Shaft, Factors * Direction of Rotation -------------------------------------------------------------------------------- 5 * Speed Reducer and Increaser --------------------------------------------------------------------- 5 * Driven Machine Factor------------------------------------------------------------------------------ 5 Specifications * JT15, JT19, JT25, JT32 ---------------------------------------------------------------------------- 6 * JT40, JT45, JT50, JT60 ---------------------------------------------------------------------------- 7 * JT72, JT85------------------------------------------------------------------------------------------- 8 Selection Guide 1. Gearbox Series ------------------------------------------------------------------------------------ 9 2. Model ----------------------------------------------------------------------------------------------- 9 3. Gear Ratio ------------------------------------------------------------------------------------------ 9 4. Input & Output RPM ------------------------------------------------------------------------------- 9 5. Shaft Arrangements And Direction Of Shaft Rotating ------------------------------------------- 10-11 6. Mounting Position -----------------------------------------------------------------------------------11 Selection Examples ----------------------------------------------------------------------------- 12 Dimensions * Model JT15 ------------------------------------------------------------------------------------------ 13 * Model JT19 ------------------------------------------------------------------------------------------ 14 * Model JT25 ------------------------------------------------------------------------------------------ 15 * Model JT32 ------------------------------------------------------------------------------------------ 16 * Model JT40 ------------------------------------------------------------------------------------------ 17 * Model JT45 ------------------------------------------------------------------------------------------ 18 * Model JT50 ------------------------------------------------------------------------------------------ 19 * Model JT60 ------------------------------------------------------------------------------------------ 20 * Model JT72 ------------------------------------------------------------------------------------------ 21 * Model JT85 ------------------------------------------------------------------------------------------ 22 Reversible Miter gearbox * General Information--------------------------------------------------------------------------------- 23 * Shaft Arrangement Mode and Mounting Positions ----------------------------------------------- 23-24 * Dimensions ------------------------------------------------------------------------------------------ 24 Hollow Shaft and Flange Adapter ---------------------------------------------------------- 25 Application Examples -------------------------------------------------------------------------- 26 Operation Manual -------------------------------------------------------------------------------- 27-28 Frequently Asked Questions ----------------------------------------------------------------- 29 Company History --------------------------------------------------------------------------------- 30 Contact Us ------------------------------------------------------------------------------------------ 31 Jacton Electromechanical Co.,Ltd 2 http://www.screw-jack.com
  • General Information Used in pairs spiral bevel gear unit to transmit rotary motion, mechanical power and torque where the drive shafts are at 90 degree right angle to each other, transmission efficiency up to 98%. Design life is 10000 hours. Gearbox Features * 10 gearboxes models JT15, JT19, JT25, JT32, JT40, JT45, JT50, JT60, JT72, JT85 * 6 reversible gearbox models JTT25, JTT32, JTT40, JTT45, JTT50, JTT60 * 42 types shaft arrangement mode & 6 types mounting positions * Gear ratio 1:1, 1.5:1, 2:1, 2.5:1, 3:1, 4:1 and 5:1 * Power rating from 0.01Kw to 335kW * Torque rating from 11.6 to 5713Nm Shaft Configurations * 2 way, 3 way and 4 way * Solid shaft or hollow shaft * Motor adapter to bolt an IEC motor * 10,000 hours lifespan for all gearbox sizes * Input speed up to 1500Rpm, customized maximum 3000Rpm * Breather/vents available for high speed required Advantages * Gearbox with low backlash. * Quiet running, when 1500Rpm, at 1meter distance, noise level less than 80dB * Normal temperature, when 1500Rpm, temperature less than 50 deg. C * Lubricants prior to shipment with oil * All miter gearboxes are factory tested prior to shipment * Detailed 2D CAD autocad drawing final confirmed before placing an order to us * Small order quantities is acceptable * Fast delivery time of standard models gearboxes, OEM & ODM are acceptable Jacton Electromechanical Co.,Ltd 3 http://www.screw-jack.com
  • Configurations JT series miter gearbox configuration includes precision spiral bevel gear, input shaft, output shaft, covers, housing, oil seal, bearing, hex. Screw, key, snag ring and paper shim. Precision Spiral Bevel Gear 1. High purity rugged alloy steel 20CrMnTiH material 2. Carburizing process, case hardened and lapped in pairs for intersecting shafts 3. Low noise with grinded spiral teeth 4. High torque with milled teeth 5. High rigidity and wear risistance Input and Output Shaft 1. Hardened and tempered alloy steel 40Cr or C45 material 2. Hanging heavy load capacity 3. With key and keyway 4. Customized stainless steel, chromium coated or other corrosion resistance painting 5. Customized spline shaft, shaft without key and keyway Housing 1. High rigidity cast iron 2. Customized stainless steel, galvanic coating or other corrosion resistance painting Bearing 1. Heavy duty tapered roller bearing 2. Customized reinforced bearings for higher radial and axial load Oil Seal 1. Double lip oil seal, prevent gear oil leak and dustproof Jacton Electromechanical Co.,Ltd 4 http://www.screw-jack.com
  • X-Shaft & Y-Shaft, Factors Direction of Rotation Speed Reducer and Increaser Driven Machine Factor Factors of driven machines Uniform Load: generators, conveyor belts, apron conveyor, screw conveyors, ventilators, agitators and mixers for uniform densities, filling and packing stations, gear wheel pumps, feed servos of machine tools. Moderate Load: Lifts, swing gear on cranes, pit ventilators, agitators and mixers for un-equal densities, piston pumps, timber processing machines, paper processing machines, winches, auxiliary drives in ships, textile machines. Heavy Load: Punches, shears, rolling and smelting machines, heavy-duty centrifuges, heavy-duty supply pumps, edge runners, vibrating machines, cutting machines, brickworks machines, heavy-duty lifts. Jacton Electromechanical Co.,Ltd 5 http://www.screw-jack.com
  • Specifications JT15 Specifications JT19 Specifications JT25 Specifications JT32 Specifications Jacton Electromechanical Co.,Ltd 6 http://www.screw-jack.com
  • JT40 Specifications JT45 Specifications JT50 Specifications JT60 Specifications Jacton Electromechanical Co.,Ltd 7 http://www.screw-jack.com
  • JT72 Specifications JT85 Specifications Jacton Electromechanical Co.,Ltd 8 http://www.screw-jack.com
  • Selection Guide JT – 15 – 1:1 – 1 2 1500R 3 – 1500R 4 – I-LR-O – B3 5 6 7 1. Gearbox Series JT: “Jacton” brand JT series miter gearbox 2. Model Model 15 19 25 32 40 Drive Shaft Diameter 15 mm 19 mm 25 mm 32 mm 40 mm Model 45 50 60 72 85 Drive Shaft Diamete 45 mm 50 mm 60 mm 72 mm 85 mm Before selecting gearbox Model, please check above corresponding model’s specifications 3. Gear Ratio Frame No. 15 19 25 32 40 45 50 60 72 85 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 1:1 2:1 2:1 1.5:1 1.5:1 1.5:1 1.5:1 1.5:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 2:1 3:1 3:1 3:1 2.5:1 2.5:1 2.5:1 2.5:1 2.5:1 4:1 4:1 4:1 3:1 3:1 3:1 3:1 3:1 5:1 5:1 5:1 4:1 4:1 4:1 4:1 4:1 5:1 5:1 5:1 5:1 5:1 Gear Ratio 4 & 5. Input & Output RPM Ratios 1:1 1.5:1 2:1 2.5:1 3:1 4:1 5:1 input output output output output output output output Rpm Rpm Rpm Rpm Rpm Rpm Rpm Rpm 1450 1450 967 725 580 483 363 290 1150 1150 767 575 460 383 288 230 870 870 580 435 348 290 218 174 580 580 387 290 232 193 145 145 400 400 267 200 160 133 100 80 300 300 200 150 120 100 75 60 200 200 133 100 80 67 50 40 100 100 67 50 40 33 25 20 10 10 7 5 4 3 3 2 Jacton Electromechanical Co.,Ltd 9 http://www.screw-jack.com
  • 6. Shaft Arrangements And Direction Of Shaft Rotating There are 42 type shaft arrangements and direction of shaft rotating for customers selection, please check below I-LR(O) series, I-UD(O) series, U-LR(O) series, D-LR(O) series, I-I-LR(O) series, I-I-UD(O) series, U-D-LR(O) series shaft arrangements and direction of shaft rotating. Note: Drive shafts can be rotated in both forward and reverse direction. I-LR(O) Series: I-LR, I-LR-O, I-L, I-L-O, I-R, I-R-O shaft arrangements and direction of shaft rotating. I-UD(O) Series: I-UD, I-UD-O, I-U, I-U-O, I-D, I-D-O shaft arrangements and direction of shaft rotating. U-LR(O) Series: U-LR, U-LR-O, U-L, U-L-O, U-R, U-R-O shaft arrangements and direction of shaft rotating. D-LR(O) Series: D-LR, D-LR-O, D-L, D-L-O, D-R, D-R-O shaft arrangements and direction of shaft rotating. I-I-LR(O) Series: I-I-LR, I-I-LR-O, I-I-L, I-I-L-O, I-I-R, I-I-R-O shaft arrangements and direction of shaft rotating. I-I-UD(O) Series: I-I-UD, I-I-UD-O, I-I-U, I-I-U-O, I-I-D, I-I-D-O shaft arrangements and direction of shaft rotating. U-D-LR(O) Series: U-D-LR, U-D-LR-O, U-D-R, U-D-R-O, U-D-L, U-D-L-O shaft arrangements and direction of shaft rotating. Jacton Electromechanical Co.,Ltd 10 http://www.screw-jack.com
  • 7. Mounting Position B3: Horizontal Mounting Position B4: Over Hung Mounting Position B5: Side Wall Mounting Postion Jacton Electromechanical Co.,Ltd 11 http://www.screw-jack.com
  • Selection Examples Load characteristics of each gearbox 196Nm, moderate load, working 8 hours/day continuously: i.e: driven machine factor f1=1.25, input speed=300Rpm, ratio i=1:1 Calculated with the following formula, the torque required by each gearbox is Each gearbox required torque=196 x 1.25=245Nm No.1 Gearbox: No.1 gearbox carries its own torque of 245Nm and at the same time transmit torques to No.2 and No.3 gearboxes, so the total load is 245Nm+245Nm+245Nm=735Nm Check above 8th page specifications, JT50 gearbox is selected No.2 Gearbox: Besides its own torque, No.2 gearbox has to transmit torque to No.3 gearbox, so the total load is: 245Nm+245Nm=490Nm Check above 8th page specifications, JT45 gearbox is selected No.3 Gearbox: As only load C exists, torque large than 245Nm is acceptable. Check above 8th page specifications, JT40 gearbox is selected Notes: 1. When i≠1, please make a choice of the input shaft. When X shaft acts as the input shaft, the machine is a gear reducer. When Y shaft acts as the input shaft, it is an gear inceaser. The positions of the two shafts can not be changed once the mounting positions and dimensions are fixed. 2. When several gearboxes are connected for output, load capacity of the line shafting should be checked. Jacton Electromechanical Co.,Ltd 12 http://www.screw-jack.com
  • Dimensions Model JT15 Dimensions Jacton Electromechanical Co.,Ltd 13 http://www.screw-jack.com
  • Model JT19 Dimensions Jacton Electromechanical Co.,Ltd 14 http://www.screw-jack.com
  • Model JT25 Dimensions Jacton Electromechanical Co.,Ltd 15 http://www.screw-jack.com
  • Model JT32 Dimensions Jacton Electromechanical Co.,Ltd 16 http://www.screw-jack.com
  • Model JT40 Dimensions Jacton Electromechanical Co.,Ltd 17 http://www.screw-jack.com
  • Model JT45 Dimensions Jacton Electromechanical Co.,Ltd 18 http://www.screw-jack.com
  • Model JT50 Dimensions Jacton Electromechanical Co.,Ltd 19 http://www.screw-jack.com
  • Model JT60 Dimensions Jacton Electromechanical Co.,Ltd 20 http://www.screw-jack.com
  • Model JT72 Dimensions Jacton Electromechanical Co.,Ltd 21 http://www.screw-jack.com
  • Model JT85 Dimensions Jacton Electromechanical Co.,Ltd 22 http://www.screw-jack.com
  • Reversible Miter gearbox General Information Standard JTT25, JTT32, JTT40, JTT45, JTT50, JTT60 models reversible miter gearbox which are used in transversal, clutch and change direction. Input shaft rotation direction remains unchanged, forward rotation, reverse rotation or no rotation for output shaft rotation direction selection. There are single ouput shaft, double output shaft, when double output shafts, one output shaft no roration and another rotation adjustable, double output shafts stop or rotation together adjustable, the double output shafts rotation direction can be the same or opposite. Normally, gear ratio 1:1, for other gear ratios, please contact our engineers. Shaft Arrangement Mode and Mounting Positions Jacton Electromechanical Co.,Ltd 23 http://www.screw-jack.com
  • Dimensions Jacton Electromechanical Co.,Ltd 24 http://www.screw-jack.com
  • Hollow Shaft and Flange Adapter If you need JT series miter gearbox with hollow input or output shaft, input or output flange adapter or involute spline, please contact Jacton directly. Jacton Electromechanical Co.,Ltd 25 http://www.screw-jack.com
  • Application Examples JT series miter gearbox is also widely application in printing press, plastic extruder, sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging, satellite dish antennas, gate valve actuators, business form press, feed screw drive, sewage conveyor, collating machinery, mixing equipment, conveyor drive, film processor and pottle packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to press, propel or raise, JT series miter gearbox is welcomed and ideal power transmission solution with all these industries. Jacton Electromechanical Co.,Ltd 26 http://www.screw-jack.com
  • Operation Manual Please read this entire document prior to operating the miter gearbox. Miter gearbox failure or injury to operators may be caused by improper installation, operation or maintenance. Installation Miter gearboxes must be mounted on a rigid, structurally sound baseplate. Ensure that miter gearbox mounting pads rest evenly on the baseplate. The use of shims may be required to avoid housing distortion which could alter the gear mesh or cause premature bearing failure. The miter gearbox may be driven by direct coupling, flexible coupling, or V-belt drive. Couplers should require only a light force to install. The driveline must be accurately aligned within the equipment manufacturer's requirements to limit operating loads and minimize thrust loads on the miter gearbox shaft. V-belt drives must be mounted close to the housing to minimize excessive overhung loading which could result in early bearing or shaft failures. Sheaves must fit correctly. At installation, a tight forced fit could move the shaft from its normal position and cause internal damage. A loose fit could induce excessive vibration during operation and cause shaft damage or breakage. Warning When mounting the miter gearbox, the buyer is responsible to properly determine the quality or grade of fastener, thread engagement, load carrying capacity, and torque requirements. Warning The buyer is responsible to provide protective shields over all external rotating parts, couplers, or shaft extensions mounted on or with the miter gearbox. Protective clothing must be worn when installing or maintaining the miter gearbox and operating system. Initial operation should be carried out under no-load conditions. Before applying power to the miter gearbox installation, review the following: 1. Check tightness of mounting bolts. 2. Check for proper oil level in miter gearbox. 3. Be certain that tools, debris, etc., are clear from rotating parts. 4. Rotate shafts by hand. If they do not rotate freely, check for uneven mounting, coupling misalignment or excessive belt tension. If all tests are satisfactory, make connections to shafts, ensure that all safety devices are in place, and begin operation. Lubrication All miter gearboxes are factory tested prior to shipment. They include the correct amount of oil unless specified by the customer to be shipped dry. Shaft bearings are splash lubricated and partially submerged in oil when the miter gearbox is mounted horizontally. After installation, remove the dipstick and verify correct oil level. If no dipstick is provided, determine level by any appropriate method. In general, the oil level should be approximately half the depth of the miter gearbox (to the parting line) for horizontal mounting, or to the shaft centerlines, if mounted other than horizontally. Caution Prior to operation, make sure the miter gearbox contains the correct amount of oil. If under-filled or over-filled, damage to the miter gearbox or injury to personnel may result. Jacton Electromechanical Co.,Ltd 27 http://www.screw-jack.com
  • Approved Lubricants: For miter gearboxs operating in an ambient temp of –20 Deg. C and +85 Deg. C JT series miter gearbox lubricant using liquid gear oil. When low speed less than 100Rpm, optional grease lubricant Caution Donot combine synthetic with non-synthetic oils in the miter gearbox. Maintenance Warning Disconnect power prior to any maintenance and do not bypass or inactivate any safety or protective device. Lock out and tag the power supply to prevent unexpected application of power. Routinely inspect mounting bolts, couplers,or other power transmitting devices to ensure all parts are firmly anchored.Keep shafts and vent plugs (when included) clean to prevent foreign particles from entering seals or housing. Inspect daily for any oil leaks and any unusual noises. Inspect weekly for end play in shafts. Inspect belt drive tension after the first ten hours of operation and periodically thereafter. Check the oil level every 24 hours of operation. In the beginning to change the oil when the miter gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will vary for each particular installation depending on the severity of the environment. Normal changes should occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service will be realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high input speeds, contact Jacton engineers. Warning Donot change or add oil while the miter gearbox is running. Damage to the miter gearbox or injury to personnel may result. The miter gearbox housing, oil, plugs, and associated components may reach high temperatures and cause severe burns. Use extreme care when servicing the miter gearbox. Trouble Shooting Jacton Electromechanical Co.,Ltd 28 http://www.screw-jack.com
  • Frequently Asked Questions How Do I Know Which Shaft Of Miter gearbox Is As Input Shaft? When using a 1:1 ratio gearbox ,it does not matter which shaft is used as the input shaft. Please check 5th page, normally, X-shaft is input shaft, Y-shaft is output shaft. For other reduction gear ratios input shaft is same as 1:1 ratio gearbox, but for increasing gear ratios input shaft, which is Y-shaft is th input shaft, X-shaft is output shaft, also check 5 page. Can I Use Miter gearbox As Speed Increaser? All miter gearbox can be used as speed increaser, by inputting on the output side of the gearbox, however it is important to check whether the miter gearbox can handle the power and speed. When using as an increaser, the input speed does not exceed the specifications recommended maximum speed. Special gearbox is available where the pinion can be put on the through shaft so that two output shaft increase the speed. Are Miter gearboxes Supplied Filled With Gear Oil? Yes, all miter gearboxes are filled gear oil prior to shipment, customers can install them and use them directly. Note: for low speed applications (100 rpm input speed and below) miter gearboxes may be recommended to have grease lubrication. How Often Should I Change Gear Oil In The Miter gearbox? Check the gear oil level every 24 hours of operation. In the beginning to change the gear oil when the miter gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will vary for each particular installation depending on the severity of the environment. Normal changes should occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service will be realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high input speeds, contact Jacton engineers. How Transmission Efficiency Of Miter gearbox? The miter gearbox transmission efficiency up to 98% Jacton Electromechanical Co.,Ltd 29 http://www.screw-jack.com
  • Company History In 1997, Established Jacton Hardware Fabrication Plant, mainly processing kinds of hardware following customers requirements. Occupied 500 square meters. In 2000, Established domestic sales department, started to develop local market, mainly processing gear transmission parts such as worm and worm gear, acme threads screw, square threads screw and acme lead screw nut. Meanwhile, sales also sell straight bevel gear and spiral bevel gears for customers. In 2002, According to some regular customers of steel plants and machines manufacturers, which used Taiwan screw jacks and miter gearboxes, due to long delivery and high price, would affect the normal operations. Jacton Hardware Fabrication Plant started to processing JT acme screw jack and JT miter gearbox following above customers samples. In 2003, Established engineering department, research and development others models of JT acme screw jack and JT miter gearbox, and draw some factory production drawings and local sales' customers drawing with 2d autocad software. In 2005, According to local market demands, Jacton Hardware Fabrication Plant is committed to research and development JB/T8809-1998 standard JTW worm screw jack, JTM machine screw jack, JTB ball screw jack and JTP cubic body miter gearbox. In 2006, Because of local markets fiercely competitive. Established Hongkong office-Jacton International Limited with own US dollars and EURO account. Established international sales department, focused on overseas markets. Meanwhile, "JACTON" as company only brand. In 2008, According to intl sales market report, cubic body screw jacks and another type cubic body miter gearboxes are very popular in Europe and America markets. After managements meetings, we started to develop JTC cubic screw jack, JTS high speed bevel gear jack, JTV cubic body miter gearbox and JTA corrosion resistance aluminium body miter gearbox. In 2009, Jacton Hardware Fabrication Plant extension, occupied 5000 square meters. Company improves the processes and products through technology investment, brings in advanced technology, production and testing equipment. In 2010, Jacton Hardware Fabrication Plant Passed ISO9001:2008 quality management system, we are strictly implement the work flow of ISO9001:2008 certifications, which ensures oversea and local customers are satisfaction with our screw jacks and miter gearboxes and fast delivery time. In 2012, In order to facilitating management, according to management decisions, sales department and design department moved to Taibao business building. Meanwhile, Jacton Hardware Fabrication Plant changed to be Dongguan Jacton Electromechanical Co.,Ltd. Jacton Electromechanical Co.,Ltd 30 http://www.screw-jack.com
  • Contact Us Jacton Electromechanical Co.,Ltd Jacton Electromechanical Co.,Ltd (Head Quarters) (Sales Dept. & Design Dept.) 1&2 Floors, Building F, Baisheng Industrial 1118, Taibao Business Building, No.1 Areas, Langwei Rd, Xinan, Changan, Dongguan, No.34, Yongjun Road, Datang, Dalingshan, Dongguan, Guangdong, China Guangdong, China Phone: 86 769 81585810 Phone: 86 769 81585852 Mobile: 86 189 25569548 Fax: Jacton International Limited Contact Us (Hong Kong Branch) General Enquiries: sales@screw-jack.com 86 769 81620195 jactonjack@gmail.com Office 17,9/F.,Tower A,New Mandarin Online Skype: jactonjack (Warren) Tsimshatsui,Kowloon,Hongkong Online Skype: jactongearbox (Abby) Tel: 852-2793-5511 Website: http://www.screw-jack.com Fax:852-3590-2333 Urgently required, please directly make a call Plaza,No.14,Science Museum Road, to Warren +86 13532830851 Jacton Electromechanical Co.,Ltd 31 http://www.screw-jack.com