PROCESS JOURNALFebruary 17, 2011 Measuring And Marking Out a Doorstop Today, we started to made our doorstop in the workshop. The doorstopI decided to make was a shape of a hamburger. First we need to used the trysquare and the metal rule to measure the pine wood. We can made 4doorstops for each of the pine wood. When we finished the measuring, wemeasured it in 166mm and 16mm. Then we going to cut it!!!! We used thebench hook to hold it. We needed to cut it half we down, so we were used athings that called saws to cut it in half way. Mr. Anderson taught us thoseways that are easy for us to cut it out. When we finish cutting we need to cutit to the shape of a doorstop, so we need to use a material called Cross OutSaws. I didn’t started to cut it in another way, so i will do it in my next class. I think one of the AOI was related to our class today is HumanIngenuity, because Human Ingenuity is the only AOI that were make things,and also Health because we were wear apron and we also wear safetygoggles. I think its really interesting to make our own doorstop and designed it,and this is my first experiment to design a thing and also made it. I think I willdo better in the next class. HERE ARE THE PICTURES I TAKE DURING THE CLASS: This picture shows that I was used a try square to measure a pine wood. This picture shows that i was used a
metal rule to measure a pine wood, so we can make sure where we need tocut when we cut it down in half way. This picture shows that i was used a handsaw to cut the pine wood in half way down. This picture shows that i was wearing a apron to cover my cloth.