• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
KYL-600H user manual
 

KYL-600H user manual

on

  • 421 views

KYL-600H, the low power data radio is designed to be low cost and high performance radio modem. The new design makes the modem more flexible for different application in various configurations. ...

KYL-600H, the low power data radio is designed to be low cost and high performance radio modem. The new design makes the modem more flexible for different application in various configurations. Basically, this type of modem is SMART enough to be customized to best meet end user’s requirements. Users don’t have to pay the features that never be used in their projects. The following lists its general functionalities of this series.

Specifications of KYL-600H
* Double phase-lock loop, double VCO structure, high stability
* providing many MODEM communication agreements
* metal shell metal, good shielding performance.
* Carrier frequency: VHF/UHF
* Air data rate:1200/2400/4800bps
* Interface: TTL/RS-232/RS-485 selectable
* Modulation: FSK/MSK
* Frequency stability: +-2.5ppm
* Channel spacing: 25 kHz
* Antenna impedance: 50 ohm
* Temperature: -30~+70C
* Supply voltage: 12V
* Size: 96x58x18mm(without radiator)
* Transmission distance can reach 10Km
* Double phase-lock loop, double VCO structure, high stability, providing many MODEM communication agreements.

Statistics

Views

Total Views
421
Views on SlideShare
421
Embed Views
0

Actions

Likes
0
Downloads
1
Comments
0

0 Embeds 0

No embeds

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    KYL-600H user manual KYL-600H user manual Document Transcript

    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. KYL-600H Data Radio Modem KYL-600H User Manual Shenzhen KYL Communication Equipment Co., Ltd Address: Unit 5-7, Building3, Huangdu Square, South of Exhibition Center,Yitian Road, Futian District, Shenzhen Guangdong China Tel: +0086-755-83410815 Moble: +0086-15999598114 Fax: +0086-755-83408785 Skype:lxmlosia Yahoo messenger: losia2012@yahoo.com MSN: kylcom01.com@hotmail.com E_mail: sales01@rf-data.com;kyl03losia@gmail.com Website: http://www.rf-data.com Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. Before using the product please read the use manual carefully. Any question in technical, you can contact us. Tel: +0086-755-83410815. I: About KYL-600H KYL-600H KYL-600H, the data radio module adopt double phase-lock loop, double VCO structure, high stability TXCO, integration RF and so on advanced technique; at the same time it use the advanced rectify fault arithmetic in software. So it has high stability and reliability. It is the first equipment for the user in the field of industry control, water conservancy, electric power, oil field and so on. This product can provide multiple MODEM communication protocols so that users have more choice. Of course, we can design according to users’ demands, or we can provide technique support and second development for users for free. II: Features: 1. Specifications: * Double phase-lock loop, double VCO structure, high stability * providing many MODEM communication protocols * Metal shell metal, good shielding performance. * Carrier frequency: VHF/UHF * Air data rate: 1200/2400bps * Interface: TTL/RS-232/RS-485 selectable * Modulation: FSK/MSK * Frequency stability: ±2.5ppm * Channel spacing: 25 kHz * Antenna impedance: 50 ohm * Temperature: -30~+70C * Supply voltage: 12V * Size: 85x58x16mm (without radiator) * Transmission distance can reach 12Km * To adapt different user structure, we can develop various size modules and offer sufficient technology support for client use the module and second development for free. Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. 2. receiver: * Receiving sensibility: ≤-119dBm (more than 12dB SINAD) * Adjacent channel selectivity: ≥65dB * Intermodulation rejection: ≥65dB * Clutter and images rejection: ≥70dB 3. Transmitter: * RF power: 5W * Frequency deviation: ≥ 5.0kHz * Adjacent channel power: ≥70dB * Transmitting current: ≤1.5A III: Application of KYL-600H: KYL-600H 600H: KYL-600H the data radio module is suitable for: * AMR Automatic Meter Reading * Wireless alarm and security systems * Building automation, security, wireless monitoring and control of room equipment, Access Control System; * Wireless data transmission, automatic data collection system; * Low power telemetry * Data radio can be used for Wireless conference voting system; * Mapping; * Radio modem can be used for Sports training & competition; * Wireless dishes ordering; * Wireless POS, PDA wireless smart terminal; * RF modem can be used for Electronic bus station and intelligent traffic; * RF transmitter Wireless electronic display screen and queuing machine; * Wireless telemetry Charging for parking, parking lot; * Wireless modem Automobile inspection and four-wheel orientation; * Wireless sensor Industrial wireless remote control and air conditioning remote controller; * Data communication used for railway, oil field, dock and army. * LED display in thruway and public places * Wireless RS232/RS485 conversion/connector; Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. * Point to multi-point wireless network, wireless on-the-spot bus and automatic data collection system; IV: How to use the KYL-600H data radio module KYL-600H KYL-600H provide RS-232, RS-485 and UART/TTL level interface port for direct connection with PC, RS485 devices, monolithic processors and other UART components kinds of applications. 1. Power supply KYL-600H work with supply voltage+12.0V DC. By using better ripple factor, KYL-600H transceivers can also share power supply with other equipment. If possible, a voltage-stabilizing chip with 12V voltage is more recommended as the only power supply than switch power supply. But if only switch power supply available, the jam by switch pulse to the transceivers should be avoided. In addition, the reliable grounding must be used if there is other device in the system equipment. In case of failing to connect with the ground, it can form its own grounding but must be absolutely separated from the municipal electric supply. If lower power for lower power consumption needed, we can design to meet users’ demands. Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. 2. Installation Installation dimension: 5 4- M 3 16 35 44. 5 4 44. 3 44. 5 98 3. Interface definition: Pin No. Signal Name Function Level Remarks 1 GND Grounding of power supply 2 A (TXD) A of RS-485(TxD of RS-232) 3 B (RXD) B of RS-485(RxD of RS-232) 4 NC 5 DGND Signal 6 RXD/TTL Receiving data(TTL level) 7 TXD/TTL Transmitting data(TTL level) 8 - - TTL - 9 Test Inside testing Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. 4. The connection schematic diagram of KYL-600H transceivers with terminal VCC 12V GND 9 1 5. Setting of frequency value, interface rate, and data value, rate, format Before using KYL-600H, users can use our software to setting frequency value,interface rate and data format. A. Users can programm any frequency value in the frequency range. Before ordering, clients need confirm the frequency range. B. Users can choose the interface rate according to requirement. C. Users can change the data format according to actual requirement. 6. Supported protocol and Transmit capability KYL-600H standard transceiver offer transparent protocol to support various applications and protocols of users. If the user needs to decrease his cost or ease the workload of terminal CPU, we can add other specific functions based on the transparent protocol, such as addressing, data acquisition, command interpretation, etc. As using FIFO mode, KYL-600H is able to satisfy user big data package transmission. Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. 7. Description of Indicator light a. The red and green lights are on about 50Ms at the same time after supplying the electricity. b. The red light is normally on when transmitting data, while the red light will crush out after ending the data. c. The green light is normally on when receiving the air signal, while the green light will crush out after receiving the air signal. 8. Standard configuration and Antenna configuration i: Standard configuration: configuration: * One KYL-600H radio modem * one Power supply connector line * one data connector line * Helical TNC antennas(about 10cm) ii: Antenna configuration: Many appropriative antennas for low power RF modules are selected for meeting different user antenna configuration. Please ask our Sales office for further information about the antenna’s dimension and performance. The main options of antennas are exterior flagelliform rubber antenna with helical SMA joint, small osculum antenna, small rod antenna and elbow antenna. If the user has special demands on antennas, we can design and produce for them specially. a. Helical TNC antennas: KYL-ANT-S868-5-TNC b. Elbow antenna : KYL-ANT-S433L-10-ESMA Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. c. Small rod antenna: KYL-ANT-S433-4-RSMA d. Small osculum antenna: KYL-ANT-O433S-300H1.5-SMA V. Application of KYL-600H Networking KYL-600H The communication channel of KYL-600H is half duplex, which is most suitable for the communication mode of point to multi-point. Under this mode, one master station must be set, and all of the rest are slave stations. A unique address is given to each station. The coordination of communication is controlled by master station that uses data frames containing address code to transmit data or command. Slave station will receive all of the data and command and compare the received address code with local address code. If they are different, the data will be deserted without any response. If those address codes are the same, it means the data is sent to the local. Slave station will make different responses according to the transmitted data or command and send back the data of response. All these jobs must be performed by upper protocol, and it is assured that there is only one transmitter-receiver in the state of transmission in the communication network at any instant moment so as to avoid the cross-interference. KYL-600H can also be used for point-to- point communication with easier operation. For the programming of serial port, Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com
    • Shenzhen KYL Communication Equipment Co., Ltd Shenz Co. all you have to do is to remember that its communication mode is semi duplex while always observing the time sequence of come-and-go for receiving and transmitting. V. Technical specification of KYL-600H * Modulation mode: GFSK/FSK * Working frequency: VHF/UHF * Power supply: DC 12V(±10%) * RF power: ≤5W; * RF data rate: 1200/2400 (Set before delivery); * Receive current: <50mA (TTL connect); * Receive sensitivity: -123dBm (1200bps) * Transmitting current: <1.5A; * Sleep current: <1mA; * Interface data format: 8E1/8N1/8O1; * Working humidity: 10%~90% relative humidity without condensation; * Working temperature: -40℃~+80℃( industrial) * RF Line-of-sight Range: 10km(BER=10-5@9600bps); 12km(BER=10-5@1200bps); * Size: 85mm*58mm*16mm (without antenna port). VI. Description of type KYL-600H-12 KYL-600H-12 Baud Rate 12:1200bps manufacturer type 24:2400bps 48:4800bps 96:9600bps 192:19200bps Fax: +0086-755-83408785 +0086- 755-83408785 kyl03losia@gmail.com www.rf-data.com