Usb Driver Install Manual

307 views

Published on

Usb Driver Install Manual

Published in: Education
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total views
307
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
4
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Usb Driver Install Manual

  1. 1. INSTALLATION GUIDE FOR USB DATA CABLE ON WINDOWS SYSTEMSImportant note: To avoid loss of data,do not remove the USB data cable from the PC or the phone duringdata trasfer,Removing the calbe during data transfer may cause unstable operation of theWindows,Operating SystemNote: The phone does not have to be connected during installation.1. Insert the CD into the CE-ROM drive,2. DO NOT plug in the calbe to pc usb port. IT is very important !3. Run CD: usb driver Setup6858.1.12.25.exe Select: Next4. Select: Next. http://krimo666.mylivepage.com/
  2. 2. Select: Finish5. Select: Finish.6. Restart the computer.7. Insert the USB cable into the USB port of the pc.8. Installation of USB cable complete.9. Open Device Manager COM4 is a assumed com port And you must set your pc software is com4 Set pc software is 115200bps If you want to change com4 to comx please read follower: http://krimo666.mylivepage.com/
  3. 3. CHANGES COMMUNICATIONS PORT UNMBER1. System Properties.2. Click Driver Manager.3. Click PORTS(COM&LPT)4. Right click Prolific USB-to-Serical Comm Port5. Click Properties.6. Click Port Settings7. Click Advanced http://krimo666.mylivepage.com/
  4. 4. 8. Changes Com Port Number.9. Click OK. Finish. http://krimo666.mylivepage.com/

×