• Share
  • Email
  • Embed
  • Like
  • Save
  • Private Content
Bs633a data sheet
 

Bs633a data sheet

on

  • 417 views

 

Statistics

Views

Total Views
417
Views on SlideShare
404
Embed Views
13

Actions

Likes
0
Downloads
0
Comments
0

1 Embed 13

http://www.sanzen.co.in 13

Accessibility

Categories

Upload Details

Uploaded via as Adobe PDF

Usage Rights

© All Rights Reserved

Report content

Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
  • Full Name Full Name Comment goes here.
    Are you sure you want to
    Your message goes here
    Processing…
Post Comment
Edit your comment

    Bs633a data sheet Bs633a data sheet Document Transcript

    • BS-633A/633ATWall Mount Speaker System APPEARANCE AND DIMENSIONAL DIAGRAM BS-633A 173 (6.81”) 101 (3.98”) 120 (4.72”) 184 (7.24”) 195 (7.68”) BS-633A 81 (3.19”) 5 (0.2”) Bridging terminal (0.45”) BLK 10kΩ 11.5 HOT BLK 3.3kΩ BS-633AT 1.7kΩ 8Ω 12 WHT COM WHT (0.47”) COM Fixing Hole (Transformer connection when the speaker is supplied from the factory) (Note) Use transformer terminals when changing input impedance.DESCRIPTIONThe BS-633A/AT are wall-mount 5" (12cm) cone-type speakers with a BS-633ATcompact and unobtrusive enclosure of ABS resin. Installation is quick 173 (6.81”) 101 (3.98”) 120 (4.72”)and easy, and the speakers can be hook-mounted or mounted directlyonto a wall. A push-type input terminal allows easy cable connections 184 (7.24”) 195 (7.68”)and bridge wiring. Input impedance can easily be adjusted bychanging the tap position of the transformer. The BS-633AT comeswith a built-in attenuator and can be connected to 2-wire and 3-wiresystems. The speakers are highly cost-effective and well-suited forBGM and announcement applications. 81 (3.19”) 5 (0.2”) (0.45”) 12 11.5 (0.47”)FEATURES Fixing Hole• Compact and unobtrusive design Bridging terminal N• Quick and easy installation GRY R N BLK C• High cost-effectiveness Attenuator BLK 3.3kΩ RED 1.7kΩ N R COM• Ideally suited for BGM and announcements R 8Ω 3-wire connection WHT COM WHT N C R (Transformer connection when the speaker is supplied from the factory) C (Note) Use transformer terminals when changing input impedance. HOT COM 2-wire connection
    • Polar Response SPECIFICATIONS 0° BS-633A 10 30° 330° Rated Input: 6W (100V line), 3W (70V line) 0 Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ(1W) -10 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W), 10kΩ (0.5W) 60° -20 300° Sensitivity (1W, 1m): 91dB Frequency Response: 120 – 15,000Hz (–20dB) -30 Speaker Component: 5" (12cm) cone-type -40 Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire) 270° Solid copper wire: ø0.8 – ø1.6mm (equivalent to90° AWG 20 – 14) -40 7-core twisted copper wire: 0.75 – 1.25mm2 -30 (equivalent to AWG 18 – 16) -20 Connetion: Push-in connector (bridging terminal) 120° 240° Operating Temperature: –10°C to 50°C (14°F to 122°F) -10 Finish: Case: ABS resin, off-white 0 240° Rear bord: Hard board 150° 10 4000Hz Dimensions: 173 (W) × 195 (H) × 101 (D) mm 180° 2000Hz 1000Hz (6.81" × 7.68" × 3.98") 500Hz Wall Mounting Case front mount: 184mm (7.24") Dimensions: Fixing hole mount: 120mm (4.72") Weight: 780g (1.72 lb)SPL vs. Frequency Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38")) × 2, 110 Speaker mounting screw (4 × 16 (0.16" x 0.63")) × 2 100 BS-330ATSPL (dB) 90 Rated Input: 6W (100V line), 3W (70V line) 80 Rated Impedance: 100V line: 1.7kΩ (6W), 3.3kΩ (3W) 70V line: 1.7kΩ (3W), 3.3kΩ (1.5W) 70 Sensitivity (1W, 1m): 91dB 60 20 50 100 500 1k 5k 10k 20k Frequency Response: 120 – 15,000Hz (–20dB) Frequency (Hz) 3W Speaker Component: 5" (12cm) cone-type 1W Applicable Cable: 600V vinyl-insulated cable (IV wire or HIV wire) Solid copper wire: ø0.8 – ø1.6mm (equivalent to AWG 20 – 14) 7-core twisted copper wire: 0.75 – 1.25mm2 (equivalent to AWG 18 – 16) Connetion: Push-in connector (bridging terminal) Attenation Level: 3W: OFF, 1 (–12dB), 2 (–6dB), 3 (0dB) 6W: OFF, 1 (–13dB), 2 (–7dB), 3 (0dB) Operating Temperature: –10°C to 50°C (14°F to 122°F) Finish: Case: ABS resin, off-white Rear bord: Hard board Dimensions: 173 (W) × 195 (H) × 101 (D) mm (6.81" × 7.68" × 3.98") (excluding volume control) Wall Mounting Case front mount: 184mm (7.24") Dimensions: Fixing hole mount: 120mm (4.72") Weight: 810g (1.79 lb) Accessory: Speaker mounting screw (4 × 35 (0.16" x 1.38")) × 2, Speaker mounting screw (4 × 16 (0.16" x 0.63")) × 2Architects and Engineers Specifications BS-633A BS-633AT The speaker shall be a 5" (12cm) cone-type speaker suitable for The speaker shall be a 5" (12cm) cone-type speaker suitable for wall mounting. Cable connection shall be by means of a push-in wall mounting. Cable connection shall be by means of a push-in connector (bridging terminal). connector (bridging terminal). The speaker shall include a transformer having multiple taps (1W, The speaker shall include a transformer having multiple taps(3W, 3W, 6W at 100V and 0.5W, 1.5W, 3W at 70V) adjustable. The 6W at 100V and 1.5W, 3W at 70V) adjustable. The output sound output sound pressure level at a distance of 1m with a 1W input pressure level at a distance of 1m with a 1W input level applied level applied shall be 91 dB SPL. The speaker shall have a shall be 91 dB SPL. The speaker shall have a frequency response frequency response of 120 – 15,000Hz (-20dB). of 120 – 15,000Hz (-20dB). The speaker shall have a built-in The speaker enclosure shall be constructed of ABS resin. The attenuator, enabling it to be connected to a 2-wire and a 3-wire speaker shall be available in off-white colour. The unit shall have system. dimensions of 173 (W) × 195 (H) × 101 (D) mm (6.81” × 7.68” × The speaker enclosure shall be constructed of ABS resin. The 3.98”), and a weight of 780g (1.72 lb). speaker shall be available in off-white colour. The unit shall have The speaker shall be a TOA model BS-633A. dimensions of 173 (W) × 195 (H) × 101 (D) mm (6.81” × 7.68” × 3.98”) (excluding volume control) and a weight of 810 g (1.79 lb). The speaker shall be a TOA model BS-633AT. TOA Corporation www.toa.jp Specifications are subject to change without notice. Printed in Japan (0708) 833-52-382-60 u