Your SlideShare is downloading. ×
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Korea Bundy Co., Ltd
Upcoming SlideShare
Loading in...5
×

Thanks for flagging this SlideShare!

Oops! An error has occurred.

×
Saving this for later? Get the SlideShare app to save on your phone or tablet. Read anywhere, anytime – even offline.
Text the download link to your phone
Standard text messaging rates apply

Korea Bundy Co., Ltd

2,328

Published on

Published in: Business
1 Comment
0 Likes
Statistics
Notes
  • Dear Sir,

    We are PA tube manufacturer. We are supplying polyamide (PA) fuel tube to Automobile application.

    Our one of the customer needs hybrid fuel line (half profile length in Metal tube & half profile length in PA tube).

    For that line we need metal tube as per following specification:-

    Tube size TSW 6.35 mm MFZnNi5-C.

    Tube performance shall be satisfied with JASO M 101 standard.

    Tube Inner surface platting - Ni platting having platting thickness 5 Micron minimum .

    Outer tube surface is green passivation platting standard SES D 2203



    Please give quote for above tube on per meter bassis & also confirm minimum order qty please.



    Also please confirm are you making profile of these tubes having beading at end portion to fit rubber hose, If yes we can provide profile dimension of the tube.

    Please send your praposal as early as possible.
    E mail ID

    prashant.more@meipl.com


    Regards



    Prashant More

    Head - Product Development

    MGI Coutier EXotech Industries Pvt. Ltd.

    1101, Urawade Road, Pirangut, Tal- Mulshi Dist. Pune

    Pin code 411027

    India

    Mob. No. +919370467886
       Reply 
    Are you sure you want to  Yes  No
    Your message goes here
  • Be the first to like this

No Downloads
Views
Total Views
2,328
On Slideshare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
15
Comments
1
Likes
0
Embeds 0
No embeds

Report content
Flagged as inappropriate Flag as inappropriate
Flag as inappropriate

Select your reason for flagging this presentation as inappropriate.

Cancel
No notes for slide

Transcript

  • 1. VISION OF KBC Global Company Leading the Tube Industry through Technological Innovation Head office in Pyeongtaek, Plant 1 Gwangju Plant 2 Changwon Plant 3 Seotan Plant 4 Suzhou SeAH, China Foshan SeAH, China Thai SeAH, Thailand Qingdao SeAH, China
  • 2. Greetings Korea Bundy Corp. was founded by SeAH Steel Corp. (formerly Busan Pipe), its parent company, in March 1979 through technical affiliation and joint venture with Bundy of Australia, US and Japan. Over the years, Korea Bundy, based on the industrial advancement in Korea, has grown into a professional maker of small diameter tubes for automobiles and home appliances. The copper brazed double-wall steel tube, our main product created through a unique manufacturing method, displays outstanding pressure resistance and excellent mechanical properties. Therefore it is used as a cycle-related tube in cooling products as well as in brake and fuel lines of automobiles. We take pride that this is the most important part for top performance and safety in household appliances and automobiles. Due to our focus on quality manufacturing, we obtained ISO/TS 16949 certifications in January 2006. To enhance corrosion resistance, we are independently developing a variety of surface treatment technologies. Recently, we also succeeded in commercializing trivalent chrome, an environmental-friendly product, and are manufacturing high-end products through the PA12 coating process. These are just some of the many ways we are responding to various demands from our customers. To satisfy increasing demands and diversify products, we are advancing as a global company by establishing plants not only in Korea, but also in countries abroad, such as the US, China, Thailand, New Zealand and Mexico. Korea Bundy will continue to exert effort in the coming days to be an active company that contributes to the development of our society through advanced technology based on precision and powered by our creative and progressive human force. Thank you. CONTENTS About Our Company Production Process Products Greetings 3 Double-Wall Steel Tube 6 Refrigerator, Kimchi Refrigerator & Air Conditioner for Household Use 14 Oneism 4 Single-Wall Steel Tube 8 Other Products for Household Use 18 History 5 Sequential Zinc Plating and Fluoride Resin Coating Steel Tube 10 Products for Automobiles 20 Quality Assurance System 24 High Core & PA 12 Coating Tube 12 Other Products for Automobiles 22 R&D 26 Stainless Steel Products 23 www.bundy.co.kr
  • 3. In the unique corporate culture of Korea Bundy, the Open One Heart Campaign aims to achieve a ONEISM Open One Heart corporate vision of advancing as the ‘Global company leading the tube industry through technological innovation’. In a broader perspective, this is a spiritual reform to serve as the motive power for the growth of Korea Bundy by flexibly, actively and autonomously responding to rapidly changing Campaign domestic and international environments. This is the foundation for evolving into the world’s best company and a means for solving labor-management conflicts in Korea through a spirit of harmony and coexistence. As a self-initiated and detailed means of achieving a strong management philosophy, such as the ‘Satisfaction of customers, stockholders and employees’, the Open One Heart Campaign aims to create maximum synergy by joining the highest spirit and forces of every individual. History of Oneism Selected as outstanding company of labor-management cooperation Dec. 1997: Minister of Labor World Best Awards (Gold) Apr. 1998: Korea Management Association Received Gold Medal in National Quality Control Division Contest Nov. 1998: President New Management Innovation Awards (for technological innovation) May 1999: Korea Productivity Center Received Gold Medal in National Quality Control Division Contest Sep. 1999: President Received Gold Medal in Quality Control Division Contest Aug. 2000: President Gyeonggi Small and Medium Business Awards (for technological innovation) Dec. 2000: Governor of Gyeonggi-do Received commendation as an exemplary taxpayer Mar. 2001: Deputy Prime Minister Management Productivity Awards (for productivity management) Jul. 2001: Minister of Commerce, Industry and Energy Received Bronze Tower Order of Industrial Service Merit (for development of outstanding capital goods) Nov. 2001: President Received Prize of Excellence in New Labor-Management Culture Awards Dec. 2001: Prime Minister Received Gold Medal in National Quality Control Division Contest Sep. 2002: President Young Frontier Awards(Gold) Nov. 2002: Seoul Economy Daily Designated as outstanding company of productivity improvement Sep. 2003: Minister of Commerce, Industry and Energy Korea Management Productivity Awards (overall) Sep. 2003: President Received $5M Tower of Export Nov. 2003: President Received $10M Tower of Export Dec. 2004: President Received commendation as exemplary taxpayer Mar. 2005: Deputy Prime Minister Designated as outstanding company of productivity improvement Nov. 2005: Minister of Commerce, Industry and Energy Received $20M Tower of Export Nov. 2005: President Selected as company of outstanding labor-management culture (Gwangju Plant) Sep. 2006: Minister of Labor Received Gold Medal in National Quality Control Division Contest Sep. 2006: President Selected as company of outstanding labor-management culture (Pyeongtaek Plant) Sep. 2007: Minister of Labor Received Prime Minister’s prize in National Productivity Awards (Gwangju Plant) Sep. 2007: Prime Minister Received Gold Medal in National Quality Control Division Contest Nov. 2007: President Received Prime Minister’s Prize in Labor-Management Culture Awards Dec. 2007: Prime Minister
  • 4. HISTORY Mar. 1979 : Established Busan Bundy Corp. (joint venture between Busan Pipe and Australia Bundy) May 1980 : Commenced sale of tubes for refrigerator condensers to Gold Star and Taihan Electric Wire Jun. 1981 : Achieved sale of 100% to refrigerator companies of Korea Oct. 1985 : Concluded affiliation agreement for fluoride resin coating steel tube manufacturing technology with Mechano Bundy of Germany Mar. 1988 : Changed trade name to Korea Bundy Corp. Sep. 1988 : Installed slitter line Apr. 1993 : Completed construction of Plant 2 in Hanam Industrial Complex, Gwangju-si Dec. 1994 : Completed authorization for domestic production of double-wall steel tubes for automobiles Completed construction of wastewater treatment plant May 1995 : Commenced production of wide condenser Nov. 1995 : Completed authorization for domestic production of single-wall steel tube for automobiles Mar. 1996 : Commenced production of molten zinc galvanizing steel tube Oct. 1996 : Obtained ISO 9002 certificate Dec. 1997 : Obtained ISO 14001 certificate Obtained single PPM certificate Oct. 1998 : Obtained KS-R-2028 Korea Industrial Standard Nov. 1999 : Obtained QS 9000 certificate Nov. 2000 : Received certificate as Quality Master of Korea Aug. 2002 : Selected as the 33rd company of the 50 Substantial Businesses of Korea (Chosun Monthly) Dec. 2003 : Established overseas plants (Foshan, Changsha, Chuzhou of China and Oakland of New Zealand) Jun. 2005 : Established Seotan Plant (M&A with Yeongpung) Dec. 2005 : Completed construction of overseas plant (Suzhou, China) Jan. 2006 : Designated a venture business Installed and started operation of SG, NSG facilities Obtained ISO/ TS 16949 certificates Jul. 2006 : Installed and started operation of PA coating facility Oct. 2007 : Completed construction of overseas plant (Chonburi, Thailand) Oct. 2008 : Completed construction of overseas plant (Qingdao, China) Present : 32 patents, 9 utility models, 4 trademarks and 21 patent applications (4 international patents)
  • 5. PROCESS COPPER BRAZED Copper brazed double wall steel tube consists with the double structure of copper-brazed steel DOUBLE WALL and is being used in industrial fields to require prevention of vibration, pressure and leakage. STEEL TUBING DIMENSIONS AND SPECIFICATIONS Outer Diameter Thickness Inner Diameter Cross-section Unit weight Proof pressure Remarks (mm) (mm) (mm) (mm2) (g/m) (kg/cm2) 2.60 0.50 1.60 3.30 25.92 350 Drawing 0.50 2.18 4.21 33.09 Drawing 3.18 0.70 1.78 5.45 42.84 Drawing 3.60 0.50 2.60 4.87 38.28 Drawing 0.50 3.00 5.50 43.23 Drawing 4.00 0.70 2.60 7.26 57.06 Drawing 4.76 0.70 3.36 8.93 70.19 5.56 0.70 4.16 10.69 84.02 Drawing 6.00 0.70 4.60 11.66 91.65 Drawing 6.35 0.70 4.95 12.42 97.62 6.80 0.70 5.40 13.50 105.30 Drawing 7.00 0.70 5.60 13.85 108.86 Drawing 8.00 0.70 6.60 16.05 126.15 250 9.53 0.70 8.13 19.42 152.64 10.00 0.70 8.60 20.45 160.74 12.00 0.90 10.20 31.38 246.65 Straight tubes up to 6m and coil tubes up to 36m in length can be supplied. TOLERANCES CHEMICAL COMPOSITION Outer diameter : 0.08mm C - MAX. 0.15% TDW Monitoring System Thickness: 0.08mm Si - Tr Mn - MAX. 0.60% P - MAX. 0.050% S - MAX. 0.050% MECHANICAL PROPERTIES RELATED CERTIFIED SPEC. Tensile Strength : MIN. 294Mpa KS R 2028 : Korean Standards Yield Strength : MIN. 177Mpa ASTM-A254 : American Society for Testing Materials SAE-J526 & J527 : Society of Automotive Engineers Elongation Rate : MIN. 25%(distance 50mm) MS191-21 : HYUNDAI & KIA Motors Standards Hardness: Max. Vickers hardness of 150 or less JASO M 101 : Japanese Automotive Standards TUBE DOUBLE WALL LINE Slitter Raw Material Uncoiling Forming Brazing
  • 6. CROSS-SECTION OF DOUBLE WALL STEEL TUBE PRODUCT FEATURES Bevel treatment in joint Copper-brazing Double-walled Copper plating of inner and outer walls, maintaining cleanliness and gloss No beading and discoloration in welded part Maintaining pressure resistance with Max. 1,200kg/cm2 Durability with air-tightness against vibration and impact Diverse type of bending and end finish processing avilable Zinc and fluoride resin coating available Copper-plating NSG and PA12 coating available Low-carbon steel BUNDY WELDING TECHNIQUE Double forming of copper-galvanized steel tube from side Maintaining even thickness and roundness by precision surface in tube shape roller forming Complete bonding Smooth joints Strong double Brazing double walls by passing through furnace of walls Maintaining roundness reducing conditions Bending Straight pipe Cooling Straightening Eddy-Current Coil pipe
  • 7. PROCESS ELECTRIC The electric welded tubes of Bundy are the most diverse small-diameter tubes in fields using single-wall WELDED welded tubes. With excellent workability, fatigue strength, precision and cleanliness, the electric welded SINGLE WALL tubes of Bundy maintain high quality at low cost. DIMENSIONS AND SPECIFICATIONS STEEL TUBING Outer Diameter Thickness Inner Diameter Cross-section Unit weight Proof pressure Remarks (mm) (mm) (mm) (mm2) (g/m) (kg/cm2) 4.00 0.70 2.68 7.26 57.06 250 4.20 0.50 3.20 5.81 45.65 4.76 0.70 3.36 8.93 70.19 6.00 0.70 4.60 11.66 91.57 6.35 0.70 4.95 12.42 97.62 8.00 0.70 6.60 16.05 126.15 200 1.00t available 9.53 0.70 8.13 18.92 152.55 1.07t available 10.00 0.70 8.60 20.45 160.74 0.90t available 12.00 0.90 10.20 31.38 246.65 150 12.70 1.00 10.70 36.76 288.82 0.90t available 13.00 1.00 11.00 37.70 296.22 14.00 1.00 12.00 40.84 321.00 15.00 0.9 13.00 43.98 345.68 1.00t available 16.00 0.9 14.00 47.12 370.36 1.00t available 17.00 1.00 15.00 50.27 395.12 100 18.00 1.00 16.00 53.41 419.80 In case of the coil tube and straight tube, the maximum lengths possible for supply are 6,500m and 6m respectively. Other factors, such as mechanical characteristics, chemical properties and allowable error, are the same as the double-wall steel tube. AUTO CONTROL SYSTEM OF WELDING POWER TSW Monitoring system The fabrication process of the Bundy tube uses a variety of modern equipment. In particular, the manufacturing of single-wall steel tubes utilizes a welding heat control system developed through academic-industrial collaboration in order to maintain even bead quality during the welding process. TUBE SINGLE WALL LINE Uncoiling Accumulator Forming and welding Reducing Annealing Cooling Copper galvan Molten zinc galv
  • 8. CROSS-SECTION OF SINGLE WALL STEEL TUBE PRODUCT FEATURES Minimizing inner bead Removing outer bead Economical Smooth outer surface Maintaining inner cleanliness to the max. of 0.1948g/m2 Durability with air-tightness against vibration and impact Diverse processing available Zinc plating and fluoride resin coating available Molten zinc plating and trivalent zinc plating (SG) NSG and PA12 coating available Low carbon steel Single-wall steel tubes can be applied with separate surface treatment in the fabrication line for increased corrosion resistance. Molten zinc, electric copper, galfan and galvalume plating is possible. The single-wall steel tube is made by using materials treated with nickel and copper plating in order to prevent corrosion of the inner surface. Bending Straight pipe anizing Recoilng Leakage test Uncoiliing Calibration Coil pipe lvanizing Eddy-current
  • 9. PROCESS SEQUENTIAL ZINC Electric zinc plating and chromate treatment on the outer surface of single- or double-wall steel tubes are applied to products that are exposed to severely corrosive environments (ex. : PLATING AND brake lines in automobiles and evaporators in refrigerators) FLUORIDE RESIN For PVF(Poly Vinyl Fluoride) coating, a resin coating is applied after electric zinc galvanizing COATIONG STEEL and chromate treatment. TUBE The first zinc layer is a protective layer for corrosion resistance on tube surfaces. The second chromate layer prevents white rust formation in the zinc layer and maintains cohesion with the PVF. The third layer is a PVF treatment to protect corrosion of the chromate layer. The double PVF coating product of Korea Bundy created using independently developed technology successfully can withstand 6,000 hours of the saline water spray test. The recently developed primer coating technology is administered after chromate treatment. This technology has been developed to increase corrosion resistance. Furthermore, by applying Cr3+ (trivalent) chromate, Korea Bundy is responding to environmental regulations as required by advanced countries. Cross Section of O : Zinc + Olive Cr3+ GF : Zinc + Olive Cr3+ + PVF(orPVdF)Green Surface Treatment Y : Zinc + Yellow Cr3+ GPF : Zinc + Olive Cr3+ + PVF-Primer + PVF Green SEQUENTIAL COATING LINE Yellow Electrolytic powders G Brushing Olive Drab Coupling Pretreatment Nickel plating Electric zinc plating Trivalent chrome plating Fluoride primer coating Hot dry Fluoride resin coating Electrolytic degreasing White Blue Dipping Trivalent
  • 10. Lot Marking System Automatic Packaging Facility Sequential Zinc Plating Line Thickness per Surface Treatment Saline Water Spray Test Classification Thickness( ) Remarks White Rust (hr) Red Rust (hr) Coating Technology SEM pic. Zinc 8-25 - - GF Chromate 2-3 72 192-280 Cr3+ PVF Min. 10 240 3,000 Cr3+ Thickness of PVdF Min. 8 240 2,000 PVF coated Layer Thickness of PVF-Primer Min. 15 240 6,000 Cr3+ ZINC coated Layer PVdF-Primer Min. 10 240 3,000 Cr3+ Thickness per Inner Treatment For inner surface treatment, the double-wall steel tube is manufactured using copper GPF plating and cold rolling. Therefore, both the inner and outer surfaces of the tube are completed with copper galvanizing. However, for single-wall steel tubes, different choices can be made according to the required use. Thickness of Type Surface Treatment Thickness( ) Remarks PVF coated Layer Double-Wall Steel Tube Copper-plating 3 Essential Copper-plating None plating 0 Thickness of ZINC coated Layer Single-Wall Steel Tube Copper-plating 3 According to customer’s spec. Nickel-plating 3 Visual Tester Clear Green Hot dry Lot Marking Cutting connections Standard length cutting Automatic packing Coating product Black
  • 11. PROCESS HICORE & PA12 COATING TUBE PROCESSING High Core Coating Tube Recently developed high core coating is used on suction pipes for air conditioner and hot pipes for refrigerators. Developed with proprietary technology, high core coating replaces conventional copper pipes, and thereby significantly reduces costs. Cross Section of Surface Treatment HD : Hot Dip zinc galvanizing SG : Hot Dip zinc galvanizing + Cr3+ GSG : Galfan + Cr3+ NSG : Galvalume + Cr3+ Thickness per Inner Treatment Saline water sprya test Type Thickness( ) Remarks Red rust (hr) HD Av. 6 72 Dust Max. 0.1mg/meter SG Av. 6 240 Oil Max. 0.1mg/meter GSG Av. 15 360 Moisture Max. 0.35mg/meter NSG Av. 15 720 HIGH CORE PROCESS LINE
  • 12. ● PA12 Coating Tube The coating products of Korea Bundy are capable of extending the durability of automobiles and comply with recent stricter environmental regulations. They were developed with high corrosion resistance and are environmental-friendly. In particular, the PA12 coating tube which has the highest corrosion is being produced in our newest facilities and is used in brake and fuel lines of automobiles. Coating Technology SEM pic. ● Cross Section of Surface Treatment Higal Thickness of PA12 Layer HIZN : Zinc + Cr3+ + PA12 primer + PA12 HIGAL : Galfan + Cr3+ + PA12 primer + PA12 Galfan = Al 5% + Zn 95% 3+ HICORE : Galvalume + Cr + PA12 primer + PA12 ● Thickness per Surface Treatment Saline water spray test 구 Type Thickness(㎛) Remarks White rust (hr) Red rust (hr) HIZN Zinc Av. 13 or 25 + PA12 Min. 150, Av.170 12,000↑ Dust Max. 0.1mg/meter HIGAL Galfan Av. 15 + PA12 Min. 150, Av.170 1,000↑ 12,000↑ Oil Max. 0.1mg/meter HICORE Galvalume Av. 15 + PA12 Min. 150, Av.170 15,000↑ Moisture Max. 0.35mg/meter PA 12 PROCESS LINE 13
  • 13. PRODUCT FLUID CARRYING SYSTEM FOR REFRIGERATOR Bundy’s products are used in a wide variety of applications, such as condensers, compressors, hot tubes, suction tubes, dryer and capillaries, and the core cycle parts of refrigerators. Product specifications and surface treatment are completed according to the consumer s request. Products manufactured with the highest quality are provided through Bundy’s outstanding technological power and stringent quality control system. In particular, due to our new refrigerant, consumer demand for foreign substances as well as moisture and oil content control inside the tube is met through our high-tech facilities and strict quality inspection. The high-quality SG, GSG and NSG tubes independently developed for the first time in the world by Korea Bundy satisfies the RoHS directive. Therefore it has achieved great popularity as copper pipe substitute for the cooling cycle component of refrigerators.
  • 14. Turn Fin Cond. Compressor Tube Turn Fin Cond. Ass’y Wire Cond. Ass’y Suction TUBE Skin Cond.(Horizontal) Hot Tube www.bundy.co.kr
  • 15. PRODUCT FLUID CARRYING SYSTEM FOR KIMCHI REFRIGERATOR & AIR CONDITIONER Capillary Tube Accumulator Dryer Sensor Freezer tape Incase Various kinds of connecting tube for Cu Tube Based on technology developed during the history of the Kimchi refrigerator, Korea Bundy is satisfying customer requirements for cooling cycle and temperature control systems, the core technologies of the Kimchi refrigerator. Bundy is providing a variety of copper processed products, such as condenser assemblies, hot pipes, skin evaporators, dryers, suction and capillaries.
  • 16. Wire Cond. Ass’y Wire Cond. Turn Fin Cond. Ass’y Steel Fin Cond. Hot Tube(SG) Hot Tube(NSG) Steel Suction www.bundy.co.kr
  • 17. PRODUCT FLUID CARRYING SYSTEM FOR OTHER PRODUCTS FOR HOUSEHOLD USE (WATER DISPENSER, SHOWCASES, WATER PURIFIERS, CLOTHES DRYER, Etc.) Korea Bundy is supplying a variety of cycle parts, such as condensers, skin evaporators and shelf evaporators, suction, capillary, Dryer, hot pipes that are essential for the refrigeration and freezing requirements of water purifiers, water cooler heaters, showcases, and refrigerators for commercial use. Skin Evap. Wire Cond. Shelf Evap. Condenser Evaporator Oil cooler Refrigerated air dryer Heater (rice cooker, iron) Heat Exchanger Ass’y Clothes dryer cond. unit Modular Cold water tank Ass’y for cold hot water purifier
  • 18. COPPER PRODUCTS Copper products processed and manufactured by Korea Bundy are being used as core refrigerant-related components found in refrigerators, air conditioners and compressors. Processed in diverse shapes such as level wound, bunch coil, pancake and straight tubes, our copper products are satisfying the various needs of our customers. In particular, the recently developed suction pipe and capillary tube developed through the industry-changing technology of using steel applied with the independently developed surface coating technology are receiving great reviews from our customers. Capillary(LWC) Capillary (cut) Filter Dryer Accumulator Capillary (processed) Suction pipe (heat exchanger pipe) Suction pipe (capillary separated) Compressor connection tube Suc. & Discharge Pipe for Air conditioner Pan Cake Coil Evaporator Door warmer(Hot pipe) www.bundy.co.kr
  • 19. PRODUCT FLUID CARRYING SYSTEM FOR AUTOMOBILE (PASSENGER VEHICLES & COMMERCIAL VECHICLES) Power Train Systems Power Steering (Feed, Return, Pressure, Suction) Transmission Oil Cooling Engine Oil Cooling Air Conditioning Heating Engine MPI GDI Injection Common Rail System CNG EGR EGR Cooler System Brake & Fuel Bundle Systems High Pressure Line(Brake & Clutch Tubes) Brake & Fuel Bundles ABS Bundles(Antilock Brake Systems) ESP Systems(Electronic Stability Program) Fuel Systems Oil Filler Neck Tubes Fuel Storage & Delivery Systems Fuel Jumper Tubes Fuel Pump Plate Ass’y Tubes Others Seat Track Lever Side Airbag Head Rest Sun Roof Wiper Linkage Tubes for automobiles produced by Korea Bundy are capable of extending the lifespan of automobiles and satisfy environmental regulations. They have been developed with high corrosion-resistance and are environmental- friendly. Products manufactured with the latest technologies developed over 30 years are being mainly used in the pipelines of brakes and fuel systems. Outstanding in pressure resistance and mechanical properties, these tubes provide excellent rust-proofing together with high thermal transmission and low inner-fluid resistance. Brake & Fuel pipe Ass y Power
  • 20. High Pressure Tube Suction Tube Power Steering Cooler Tube Cooling Fin Tube Fuel Pump Tube Tube for Fuel System Steering Cooler Tube Sun Roof Tube Oil Suction Tube Power Steering Feed Tube www.bundy.co.kr
  • 21. PRODUCT FLUID CARRYING SYSTEM FOR OTHER PRODUCTS AUTOMOBILE (HEAVY EQUIPMENTS, ENGINE PRODUCTS AND FARMING MACHINERY) Boom / Arm Pipe Hydraulic Cylinder Parts Oil Pipe Head Rest Air/Water/Exhaust Pipe Exhaust Pipe Fuel Filler Neck High pressure tube
  • 22. STAINLESS PRODUCTS Stainless steel pipes of Korea Bundy are mainly used in the EGR of automobiles and heavy equipments. EGR (exhaust gas re-circulation) prevents emission of harmful gas by sending exhaust gas generated by the engine back to the engine before it is discharged into the air. Also, the stainless steel pipes absorb vibrations generated from the engine and provide outstanding workability during assembly, EGR is produced with independently developed bellows in a multi-type facility. Recently, Korea Bundy is promoting the development of high-pressure pipes for use in GDI (gasoline direct injector) engines, which are a substantial improvement over the conventional fuel injection system used by gasoline vehicles. www.bundy.co.kr
  • 23. QUALITY ASSURANCE SYSTEM The products of Korea Bundy are creations of new technology. With our strong belief that the quickest way to securing quality competitiveness is by achieving quality through humanism, Korea Bundy takes pride in our new technology that allows us to develop the most perfect products. Moisture Meter Oil content Meter Thermo-hygrostat Multipurpose Material Tester ET Tester Saline Water Spray Tester Heat Cycle Tester
  • 24. ISO / TS 16949 ISO 14001 OHSAS18001 KS R 2028 Single PPM 061009~091008 SPECIFICATION COMPARISON TABEL Spec. ASTM A 254 KS R 2028 JASO M101-21 Mitsubishi MS82-1311 Nissan M2023 Hyundai MS 191-21 Exterior No cracking, rust and harmful substances C 0.05% ~ 0.15% 0.15% 0.15% Chemical Mn 0.27% ~ 0.63% 0.60% 0.60% Component P 0.035% 0.050% 0.010% S 0.035% 0.050% 0.050% TS 290 Mpa Min. 294 Mpa Min. 290 Mpa Min. 294 Mpa Min. 294 Mpa Min. Mechanical YP 172Mpa Min. 177Mpa Min. 180 Mpa Min. 177 Mpa Min. 177 Mpa Min. Characteristics EL 25% Min. 25% Min. 25% Min. 25% Min. 25% Min. H No spec. 150HV Max. 120HV Max. 140HV Max. 150HV Max. Flaring No defect after tube expansion by 20% Flattening test No defect after 3t flattening Bending No 3D defect 1.5D(< 8.00) 2.5D( 8.00) No defect Double wall Double wall Double wall Double wall Double wall 8.00 - 19.3 Mpa 8.00 - 24.5 Mpa Proof pressure < 8.00 - 35 Mpa 6.35 - 34.3 Mpa 7.00 - 34.3 Mpa 6.35 - 24.3 Mpa 6.35 - 34.3 Mpa 8.00 - 25 Mpa 8.00~10.00 - 24.5 Mpa 8.00~10.00 - 24.5Mpa 4.76 - 32.4 Mpa 4.76 - 34.4 Mpa Outer diameter 4.76~9.53 +/- 0.076 mm < 6.35 - +/- 0.08 4.76~22.00 +/- 0.10 mm < 8.00 - +/- 0.08 4.76~15.90 +/- 0.10 mm 4.76~10.00 +/- 0.10 mm (before coating) 11.1~15.9 +/- 0.102 mm 6.35 - +/- 0.10 3.17 +/- 0.08 mm 8.00 - +/- 0.10 Thickness +/-0.08 mm(0.51~0.76t) < 6.35 - +/- 0.08 < 8.00 - +/- 0.08 +/-0.10 mm(0.70~1.00t) 0.70~1.00t +/- 0.10 mm 0.70t +/- 0.10 mm (before coating) +/-0.09 mm(0.79~1.24t ) 6.35 - +/- 0.10 8.00 - +/- 0.10 Z8 White rust 72hr Red rust 192hr Corrosion- resistance Z13 No spec. White rust 72hr Red rust 288hr (coloerd) Z25 White rust 72hr Red rust 480hr www.bundy.co.kr
  • 25. R&D A global company leading the tube industry through technological innovation Korea Bundy Corp. obtained a variety of patent rights, utility models and registered trademarks as a result of our ongoing R&D. Korea Bundy Corp. is continuously pursuing the development of domestic, alternative and new products in order to reduce costs, improve quality, and develop products and services that keep pace with the requirements of our customers. Korea Bundy Corp. is also focusing on R&D to maximize customer satisfaction. CHAMBER WIND TUNNEL EQUIP CALORIMETER Temperature Test Condenser Kcal/h Test Condenser Kcal/h Test Ref Cycle Test Drop Ressure Test Drop Ressure Test Ref Energy Consumption Test Air Volume Test Ref. Flow Rate Test SEM-EDX ICP-OES
  • 26. Vision of KBC “A Leading World Class Company with Technical Innovation” KOREA H.Q U.S.A. Alabama Mexico SEOTAN 4th Factory PYEONGTAEK H.Q. 1st Factory Australia CHANGWON 3rd Factory GWANGJU 2nd Factory GLOBAL BUNDY PYEONGTAEK(KOREA H.Q) 1st Factroy Changsha Plant 206-1, Shin-ri, Jinwi-myeon, Pyeongtaek-si, Gyeonggi-do, 451-865, Korea Li Tang Vallige, Muyu Town, Changsha, Hunan, 410119, P.R. China Tel : +82-31-662-3335 Fax : +82-31-662-8502 Tel : +86-731-690-9608 Fax : +86-731-690-960909 SeAH Precision Metal (Thailand) Co., Ltd. GWANGJU 2nd Factroy 700/809 Moo 1, Amata Nakorn Industrial Estate(Phase 8) T. Pantong A.Pantong 738-3, Ancheong-dong, Gwangsan-gu, Gwangju, 506-258, Korea Chonburi 20160, Thailand Tel : +82-62-953-1771 Fax : +82-62-953-1772 Tel : +66-38-447-334~8 Fax : +66-38-447-339 CHANGWON 3rd Factroy New Zealand SeAH Precision Metal Co.,Ltd 119-3, Sinchon-dong, Changwon-si, Gyeongsangnam-do, 641-370, Korea 88 Harris Road, East Tamaki Auckland 1730, New Zeland Tel : +82-55-286-3308 Fax : +82-55-267-0985 Tel : +64-9-274-9445 Fax : +64-9-274-0281 SEOTAN 4th Factroy Qingdao SeAH Precision Metal Co., Ltd. 472-1, Suworam-ri, Seotan-myeon, Pyeongtaek-si, Gyeonggi-do, 451-852, Korea The West side of the 8 th way, The south of the 35 th way, Fuyuan Industrial Tel : +82-31-662-2800 Fax : +82-31-663-2400 garden development district, Qingdao, Shandong 266500 P.R. China Tel : +86-532-8316-6057 Fax : +86-532-8316-6633 SeAH Precision Mexico S.A de C.V Suzhou SeAH Precision Metal Co., Ltd AV. Bentio Juarez 121 B-2, Col.Parque Industrial Queretaro, No. 2008 Dongtaihu RD., Wangshan Industry Park, Wuzhong Economic Santa Rosa Jauregui, Queretaro, Queretaro CP76220 Mexico Development Zone, Suzhou, Jiangsu, 215103, P.R. China Tel : +52-442-357-1602 Tel : +86-512-6630-0173 Fax : +86-512-6630-0170 Foshan SeAH Precision Metal Co., Ltd Foshan Plant Quin Jun Rd, Lanshi, Foshan, Guangdong 528041, P.R. China Tel : +86-757-8331-1009 Fax : +86-757-8331-3061 Chuzhou Plant Cheng Nan Science and Technology Industry Park, Chuzhou, Anhui, 239000, P.R. China Tel : +86-550-395-2718 Fax : +86-550-395-2016 www.bundy.co.kr
  • 27. KOREA BUNDY Corp. www.bundy.co.kr

×